8 files changed, 682 insertions, 0 deletions

diff --git a/emulators/hercules/Makefile b/emulators/hercules/Makefile
new file mode 100644
index 000000000000..852587cc9367
--- /dev/null
+++ b/emulators/hercules/Makefile
@@ -0,0 +1,40 @@
+# New ports collection makefile for:	dice
+# Date created:		Thu Jan 31 12:07:01 CET 2002
+# Whom:			Miguel Mendez <flynn@energyhq.homeip.net>
+#
+# $FreeBSD$
+#
+
+PORTNAME=	hercules
+PORTVERSION=	2.15
+CATEGORIES=	emulators
+MASTER_SITES=	http://www.conmicro.cx/hercules/
+
+MAINTAINER=	flynn@energyhq.homeip.net
+
+GNU_CONFIGURE=	yes
+
+post-patch:
+
+	@${PERL} -pi -e 's@lpthread@pthread@g' ${WRKSRC}/configure
+
+do-install:
+
+	@for i in hercules dasdinit dasdisup dasdload dasdls dasdpdsu \
+		tapecopy tapemap tapesplt cckd2ckd cckdcdsk ckd2cckd \
+		cckdcomp cckdswap hetget hetinit hetmap hetupd dmap2hrc; \
+	do \
+		${INSTALL_PROGRAM} ${WRKSRC}/$$i ${PREFIX}/bin; \
+	done
+
+.if !defined(NOPORTDOCS)
+	@${MKDIR} ${PREFIX}/share/doc/hercules
+	@${RM} -f ${WRKSRC}/html/Makefile*
+	@for i in ${WRKSRC}/hercules.cnf ${WRKSRC}/html/* ; \
+	do \
+		${INSTALL_DATA} $$i ${PREFIX}/share/doc/hercules; \
+	done
+.endif
+	@${CAT} pkg-message
+
+.include <bsd.port.mk>
diff --git a/emulators/hercules/distinfo b/emulators/hercules/distinfo
new file mode 100644
index 000000000000..96b7f70fb944
--- /dev/null
+++ b/emulators/hercules/distinfo
@@ -0,0 +1 @@
+MD5 (hercules-2.15.tar.gz) = 8eb98b2b5663607fda075fc57f019172
diff --git a/emulators/hercules/files/patch-tapecopy.c b/emulators/hercules/files/patch-tapecopy.c
new file mode 100644
index 000000000000..a1c42c2fdaef
--- /dev/null
+++ b/emulators/hercules/files/patch-tapecopy.c
@@ -0,0 +1,363 @@
+--- tapecopy.c.orig	Thu Nov 29 13:53:46 2001
++++ tapecopy.c	Thu Jan 31 13:26:01 2002
+@@ -8,357 +8,18 @@
+ /* prints a summary of the tape files and blocksizes.                */
+ /*-------------------------------------------------------------------*/
+ 
+-#include "hercules.h"
+-
+-/*-------------------------------------------------------------------*/
+-/* Structure definition for AWSTAPE block header                     */
+-/*-------------------------------------------------------------------*/
+-typedef struct _AWSTAPE_BLKHDR {
+-        HWORD   curblkl;                /* Length of this block      */
+-        HWORD   prvblkl;                /* Length of previous block  */
+-        BYTE    flags1;                 /* Flags byte 1              */
+-        BYTE    flags2;                 /* Flags byte 2              */
+-    } AWSTAPE_BLKHDR;
+-
+-/* Definitions for AWSTAPE_BLKHDR flags byte 1 */
+-#define AWSTAPE_FLAG1_NEWREC    0x80    /* Start of new record       */
+-#define AWSTAPE_FLAG1_TAPEMARK  0x40    /* Tape mark                 */
+-#define AWSTAPE_FLAG1_ENDREC    0x20    /* End of record             */
+-
+-/*-------------------------------------------------------------------*/
+-/* Static data areas                                                 */
+-/*-------------------------------------------------------------------*/
+-static BYTE vollbl[] = "\xE5\xD6\xD3";  /* EBCDIC characters "VOL"   */
+-static BYTE hdrlbl[] = "\xC8\xC4\xD9";  /* EBCDIC characters "HDR"   */
+-static BYTE eoflbl[] = "\xC5\xD6\xC6";  /* EBCDIC characters "EOF"   */
+-static BYTE eovlbl[] = "\xC5\xD6\xE5";  /* EBCDIC characters "EOV"   */
+-static struct mt_tape_info tapeinfo[] = MT_TAPE_INFO;
+-static struct mt_tape_info densinfo[] = {
+-    {0x01, "NRZI (800 bpi)"},
+-    {0x02, "PE (1600 bpi)"},
+-    {0x03, "GCR (6250 bpi)"},
+-    {0x05, "QIC-45/60 (GCR, 8000 bpi)"},
+-    {0x06, "PE (3200 bpi)"},
+-    {0x07, "IMFM (6400 bpi)"},
+-    {0x08, "GCR (8000 bpi)"},
+-    {0x09, "GCR /37871 bpi)"},
+-    {0x0A, "MFM (6667 bpi)"},
+-    {0x0B, "PE (1600 bpi)"},
+-    {0x0C, "GCR (12960 bpi)"},
+-    {0x0D, "GCR (25380 bpi)"},
+-    {0x0F, "QIC-120 (GCR 10000 bpi)"},
+-    {0x10, "QIC-150/250 (GCR 10000 bpi)"},
+-    {0x11, "QIC-320/525 (GCR 16000 bpi)"},
+-    {0x12, "QIC-1350 (RLL 51667 bpi)"},
+-    {0x13, "DDS (61000 bpi)"},
+-    {0x14, "EXB-8200 (RLL 43245 bpi)"},
+-    {0x15, "EXB-8500 (RLL 45434 bpi)"},
+-    {0x16, "MFM 10000 bpi"},
+-    {0x17, "MFM 42500 bpi"},
+-    {0x24, "DDS-2"},
+-    {0x8C, "EXB-8505 compressed"},
+-    {0x90, "EXB-8205 compressed"},
+-    {0, NULL}};
+-static BYTE buf[65500];
+-
+-/*-------------------------------------------------------------------*/
+-/* ASCII to EBCDIC translate tables                                  */
+-/*-------------------------------------------------------------------*/
+-#include "codeconv.h"
+-
+-/*-------------------------------------------------------------------*/
+-/* Subroutine to print tape status                                   */
+-/*-------------------------------------------------------------------*/
+-static void print_status (BYTE *devname, long stat)
+-{
+-    printf ("%s status: %8.8lX", devname, stat);
+-    if (GMT_EOF(stat)) printf (" EOF");
+-    if (GMT_BOT(stat)) printf (" BOT");
+-    if (GMT_EOT(stat)) printf (" EOT");
+-    if (GMT_SM(stat)) printf (" SETMARK");
+-    if (GMT_EOD(stat)) printf (" EOD");
+-    if (GMT_WR_PROT(stat)) printf (" WRPROT");
+-    if (GMT_ONLINE(stat)) printf (" ONLINE");
+-    if (GMT_D_6250(stat)) printf (" 6250");
+-    if (GMT_D_1600(stat)) printf (" 1600");
+-    if (GMT_D_800(stat)) printf (" 800");
+-    if (GMT_DR_OPEN(stat)) printf (" NOTAPE");
+-    printf ("\n");
+-
+-} /* end function print_status */
+-
+-/*-------------------------------------------------------------------*/
+-/* Subroutine to obtain and print tape status                        */
+-/* Return value: 0=normal, 1=end of tape, -1=error                   */
+-/*-------------------------------------------------------------------*/
+-static int obtain_status (BYTE *devname, int devfd)
+-{
+-int             rc;                     /* Return code               */
+-struct mtget    stblk;                  /* Area for MTIOCGET ioctl   */
+-
+-    rc = ioctl (devfd, MTIOCGET, (char*)&stblk);
+-    if (rc < 0)
+-    {
+-        printf ("tapecopy: Error reading status of %s: %s\n",
+-                devname, strerror(errno));
+-        return -1;
+-    }
+-
+-    print_status (devname, stblk.mt_gstat);
+-
+-    if (GMT_EOD(stblk.mt_gstat)) return 1;
+-    if (GMT_EOT(stblk.mt_gstat)) return 1;
+-
+-    return 0;
+-} /* end function print_status */
+ 
+ /*-------------------------------------------------------------------*/
+ /* TAPECOPY main entry point                                         */
+ /*-------------------------------------------------------------------*/
+ int main (int argc, char *argv[])
+ {
+-int             rc;                     /* Return code               */
+-int             i;                      /* Array subscript           */
+-int             len;                    /* Block length              */
+-int             prevlen;                /* Previous block length     */
+-BYTE           *devname;                /* -> Tape device name       */
+-BYTE           *filename;               /* -> Output file name       */
+-int             devfd;                  /* Tape file descriptor      */
+-int             outfd = -1;             /* Output file descriptor    */
+-int             fileno;                 /* Tape file number          */
+-int             blkcount;               /* Block count               */
+-int             minblksz;               /* Minimum block size        */
+-int             maxblksz;               /* Maximum block size        */
+-struct mtop     opblk;                  /* Area for MTIOCTOP ioctl   */
+-struct mtget    stblk;                  /* Area for MTIOCGET ioctl   */
+-long            density;                /* Tape density code         */
+-BYTE            labelrec[81];           /* Standard label (ASCIIZ)   */
+-AWSTAPE_BLKHDR  awshdr;                 /* AWSTAPE block header      */
+-
+-    /* Display the program identification message */
+-    display_version (stderr, "Hercules tape copy program ");
+-
+-    /* The first argument is the tape device name */
+-    if (argc > 1 && argv[1] != NULL && strlen(argv[1]) > 5
+-        && memcmp (argv[1], "/dev/", 5) == 0)
+-    {
+-        devname = argv[1];
+-    }
+-    else
+-    {
+-        printf ("Usage: tapecopy /dev/st0 [outfile]\n");
+-        exit (1);
+-    }
+-
+-    /* The second argument is the output file name */
+-    if (argc > 2 && argv[2] != NULL)
+-        filename = argv[2];
+-    else
+-        filename = NULL;
+-
+-    /* Open the tape device */
+-    devfd = open (devname, O_RDONLY|O_BINARY);
+-    if (devfd < 0)
+-    {
+-        printf ("tapecopy: Error opening %s: %s\n",
+-                devname, strerror(errno));
+-        exit (3);
+-    }
+ 
+-    /* Obtain the tape status */
+-    rc = ioctl (devfd, MTIOCGET, (char*)&stblk);
+-    if (rc < 0)
+-    {
+-        printf ("tapecopy: Error reading status of %s: %s\n",
+-                devname, strerror(errno));
+-        exit (7);
+-    }
+ 
+-    /* Display tape status information */
+-    for (i = 0; tapeinfo[i].t_type != 0
+-                && tapeinfo[i].t_type != stblk.mt_type; i++);
+-
+-    if (tapeinfo[i].t_name != NULL)
+-        printf ("%s device type: %s\n", devname, tapeinfo[i].t_name);
+-    else
+-        printf ("%s device type: 0x%lX\n", devname, stblk.mt_type);
+-
+-    density = (stblk.mt_dsreg & MT_ST_DENSITY_MASK)
+-                >> MT_ST_DENSITY_SHIFT;
+-
+-    for (i = 0; densinfo[i].t_type != 0
+-                && densinfo[i].t_type != density; i++);
+-
+-    if (densinfo[i].t_name != NULL)
+-        printf ("%s tape density: %s\n", devname, densinfo[i].t_name);
+-    else
+-        printf ("%s tape density code: 0x%lX\n", devname, density);
+-
+-    if (stblk.mt_gstat != 0)
+-    {
+-        print_status (devname, stblk.mt_gstat);
+-    }
+-
+-    /* Set the tape device to process variable length blocks */
+-    opblk.mt_op = MTSETBLK;
+-    opblk.mt_count = 0;
+-    rc = ioctl (devfd, MTIOCTOP, (char*)&opblk);
+-    if (rc < 0)
+-    {
+-        printf ("tapecopy: Error setting attributes for %s: %s\n",
+-                devname, strerror(errno));
+-        exit (5);
+-    }
+-
+-    /* Rewind the tape to the beginning */
+-    opblk.mt_op = MTREW;
+-    opblk.mt_count = 1;
+-    rc = ioctl (devfd, MTIOCTOP, (char*)&opblk);
+-    if (rc < 0)
+-    {
+-        printf ("tapecopy: Error rewinding %s: %s\n",
+-                devname, strerror(errno));
+-        exit (6);
+-    }
+-
+-    /* Open the output file */
+-    if (filename != NULL)
+-    {
+-        outfd = open (filename, O_WRONLY | O_CREAT | O_BINARY,
+-                        S_IRUSR | S_IWUSR | S_IRGRP);
+-        if (outfd < 0)
+-        {
+-            printf ("tapecopy: Error opening %s: %s\n",
+-                    filename, strerror(errno));
+-            exit (4);
+-        }
+-    }
+-
+-    /* Copy blocks from tape to the output file */
+-    fileno = 1;
+-    blkcount = 0;
+-    minblksz = 0;
+-    maxblksz = 0;
+-    len = 0;
+-
+-    while (1)
+-    {
+-        /* Save previous block length */
+-        prevlen = len;
+-
+-        /* Read a block from the tape */
+-        len = read (devfd, buf, sizeof(buf));
+-        if (len < 0)
+-        {
+-            printf ("tapecopy: Error reading %s: %s\n",
+-                    devname, strerror(errno));
+-            obtain_status (devname, devfd);
+-            exit (8);
+-        }
+-
+-        /* Check for tape mark */
+-        if (len == 0)
+-        {
+-            /* Print summary of current file */
+-            printf ("File %u: Blocks=%u, block size min=%u, max=%u\n",
+-                    fileno, blkcount, minblksz, maxblksz);
+-
+-            /* Write tape mark to output file */
+-            if (outfd >= 0)
+-            {
+-                /* Build block header for tape mark */
+-                awshdr.curblkl[0] = 0;
+-                awshdr.curblkl[1] = 0;
+-                awshdr.prvblkl[0] = prevlen & 0xFF;
+-                awshdr.prvblkl[1] = (prevlen >> 8) & 0xFF;
+-                awshdr.flags1 = AWSTAPE_FLAG1_TAPEMARK;
+-                awshdr.flags2 = 0;
+-
+-                /* Write block header to output file */
+-                rc = write (outfd, &awshdr, sizeof(AWSTAPE_BLKHDR));
+-                if (rc < sizeof(AWSTAPE_BLKHDR))
+-                {
+-                    printf ("tapecopy: Error writing %s: %s\n",
+-                            filename, strerror(errno));
+-                    exit (9);
+-                } /* end if(rc) */
+-
+-            } /* end if(outfd) */
+-
+-            /* Reset counters for next file */
+-            fileno++;
+-            minblksz = 0;
+-            maxblksz = 0;
+-            blkcount = 0;
+-
+-            /* Determine whether end of tape has been read */
+-            rc = obtain_status (devname, devfd);
+-            if (rc == 0) continue;
+-            if (rc > 0) printf ("End of tape\n");
+-            break;
+-
+-        } /* end if(tapemark) */
+-
+-        /* Count blocks and block sizes */
+-        blkcount++;
+-        if (len > maxblksz) maxblksz = len;
+-        if (minblksz == 0 || len < minblksz) minblksz = len;
+-
+-        /* Print standard labels */
+-        if (len == 80 && blkcount < 4
+-            && (memcmp(buf, vollbl, 3) == 0
+-                || memcmp(buf, hdrlbl, 3) == 0
+-                || memcmp(buf, eoflbl, 3) == 0
+-                || memcmp(buf, eovlbl, 3) == 0))
+-        {
+-            for (i=0; i < 80; i++)
+-                labelrec[i] = ebcdic_to_ascii[buf[i]];
+-            labelrec[i] = '\0';
+-            printf ("%s\n", labelrec);
+-        }
+-        else
+-        {
+-            printf ("File %u: Block %u\r", fileno, blkcount);
+-        }
+-
+-        /* Write block to output file */
+-        if (outfd >= 0)
+-        {
+-            /* Build the block header */
+-            awshdr.curblkl[0] = len & 0xFF;
+-            awshdr.curblkl[1] = (len >> 8) & 0xFF;
+-            awshdr.prvblkl[0] = prevlen & 0xFF;
+-            awshdr.prvblkl[1] = (prevlen >> 8) & 0xFF;
+-            awshdr.flags1 = AWSTAPE_FLAG1_NEWREC
+-                            | AWSTAPE_FLAG1_ENDREC;
+-            awshdr.flags2 = 0;
+-
+-            /* Write block header to output file */
+-            rc = write (outfd, &awshdr, sizeof(AWSTAPE_BLKHDR));
+-            if (rc < sizeof(AWSTAPE_BLKHDR))
+-            {
+-                printf ("tapecopy: Error writing %s: %s\n",
+-                        filename, strerror(errno));
+-                exit (10);
+-            } /* end if(rc) */
+-
+-            /* Write data block to output file */
+-            rc = write (outfd, buf, len);
+-            if (rc < len)
+-            {
+-                printf ("tapecopy: Error writing %s: %s\n",
+-                        filename, strerror(errno));
+-                exit (11);
+-            } /* end if(rc) */
+-
+-        } /* end if(outfd) */
+-
+-    } /* end while */
+-
+-    /* Close files and exit */
+-    close (devfd);
+-    if (filename != NULL) close (outfd);
++    /* Display the program identification message */
++ 
+ 
++    printf("Tape copy is broken, sorry\n");
+     return 0;
+ 
+ } /* end function main */
diff --git a/emulators/hercules/files/patch-tapedev.c b/emulators/hercules/files/patch-tapedev.c
new file mode 100644
index 000000000000..9b3bff653e48
--- /dev/null
+++ b/emulators/hercules/files/patch-tapedev.c
@@ -0,0 +1,224 @@
+--- tapedev.c.orig	Tue Nov 20 23:39:47 2001
++++ tapedev.c	Thu Jan 31 13:06:43 2002
+@@ -131,6 +131,11 @@
+ #define TAPEDEVT_SCSITAPE       3       /* Physical SCSI tape        */
+ #define TAPEDEVT_HET            4       /* HET format disk file      */
+ 
++/* Can you say totally b0rken? */
++#define MT_ST_DENSITY_MASK	1
++#define MT_TAPE_INFO		2
++#define MTSETBLK		3
++#define MT_ST_DENSITY_SHIFT	4
+ /*-------------------------------------------------------------------*/
+ /* Structure definition for tape block headers                       */
+ /*-------------------------------------------------------------------*/
+@@ -194,7 +199,10 @@
+ /*-------------------------------------------------------------------*/
+ /* Static data areas                                                 */
+ /*-------------------------------------------------------------------*/
+-static struct mt_tape_info tapeinfo[] = MT_TAPE_INFO;
++
++
++/* static struct mt_tape_info tapeinfo[] = MT_TAPE_INFO; 
++
+ static struct mt_tape_info densinfo[] = {
+     {0x01, "NRZI (800 bpi)"},
+     {0x02, "PE (1600 bpi)"},
+@@ -221,7 +229,7 @@
+     {0x8C, "EXB-8505 compressed"},
+     {0x90, "EXB-8205 compressed"},
+     {0, NULL}};
+-
++*/
+ static PARSER ptab[] =
+ {
+     { "awstape", NULL }, 
+@@ -1151,6 +1159,7 @@
+     if (dev->fd < 0) return 0;
+ 
+     /* Obtain tape status */
++/*
+     rc = ioctl (dev->fd, MTIOCGET, (char*)&stblk);
+     if (rc < 0)
+     {
+@@ -1159,8 +1168,9 @@
+         return 0;
+     }
+     stat = stblk.mt_gstat;
+-
++*/
+     /* Display tape status */
++/*
+     if (dev->ccwtrace || dev->ccwstep)
+     {
+         sprintf (buf, "%s status: %8.8X", dev->filename, stat);
+@@ -1177,10 +1187,11 @@
+         if (GMT_DR_OPEN(stat)) strcat (buf, " NOTAPE");
+         logmsg ("HHC215I %s\n", buf);
+     }
+-
++*/
+     /* If tape has been ejected, then close the file because
+        the driver will not recognize that a new tape volume
+        has been mounted until the file is re-opened */
++/*
+     if (GMT_DR_OPEN(stat))
+     {
+         close (dev->fd);
+@@ -1190,8 +1201,10 @@
+         dev->prvblkpos = -1;
+         dev->blockid = 0;
+     }
+-
++*/
+     /* Return tape status */
++
++	fprintf(stderr,"Sorry, tape support is broken.\n");
+     return stat;
+ 
+ } /* end function status_scsitape */
+@@ -1249,6 +1262,7 @@
+     }
+ 
+     /* Intervention required if no tape is mounted */
++/*
+     if (GMT_DR_OPEN(stblk.mt_gstat))
+     {
+         dev->sense[0] = SENSE_IR;
+@@ -1256,8 +1270,9 @@
+         *unitstat = CSW_CE | CSW_DE | CSW_UC;
+         return -1;
+     }
+-
++*/
+     /* Display tape status information */
++/*
+     for (i = 0; tapeinfo[i].t_type != 0
+                 && tapeinfo[i].t_type != stblk.mt_type; i++);
+ 
+@@ -1280,8 +1295,9 @@
+     else
+         logmsg ("HHC221I %s tape density code: 0x%lX\n",
+                 dev->filename, density);
+-
++*/
+     /* Set the tape device to process variable length blocks */
++ /*
+     opblk.mt_op = MTSETBLK;
+     opblk.mt_count = 0;
+     rc = ioctl (dev->fd, MTIOCTOP, (char*)&opblk);
+@@ -1294,8 +1310,9 @@
+         *unitstat = CSW_CE | CSW_DE | CSW_UC;
+         return -1;
+     }
+-
++*/
+     /* Rewind the tape to the beginning */
++/* 
+     opblk.mt_op = MTREW;
+     opblk.mt_count = 1;
+     rc = ioctl (dev->fd, MTIOCTOP, (char*)&opblk);
+@@ -1308,7 +1325,7 @@
+         *unitstat = CSW_CE | CSW_DE | CSW_UC;
+         return -1;
+     }
+-
++*/
+     return 0;
+ 
+ } /* end function open_scsitape */
+@@ -1436,13 +1453,14 @@
+ 
+     /* If I/O error and status indicates EOF, then a tapemark
+        was detected, so increment the file number and return 0 */
++/*
+     if (rc < 0 && fsrerrno == EIO && GMT_EOF(stat))
+     {
+         dev->curfilen++;
+         dev->blockid++;
+         return 0;
+     }
+-
++*/
+     /* Handle MTFSR error condition */
+     if (rc < 0)
+     {
+@@ -1481,6 +1499,7 @@
+     stat = status_scsitape (dev);
+ 
+     /* Unit check if already at start of tape */
++/*
+     if (GMT_BOT(stat))
+     {
+         dev->sense[0] = 0;
+@@ -1488,7 +1507,7 @@
+         *unitstat = CSW_CE | CSW_DE | CSW_UC;
+         return -1;
+     }
+-
++*/
+     /* Backspace block on SCSI tape */
+     opblk.mt_op = MTBSR;
+     opblk.mt_count = 1;
+@@ -2703,12 +2722,15 @@
+ U32             stat;                   /* SCSI tape status bits     */
+ 
+     /* Indicate intervention required if no file */
++/*
+     if (!strcmp (dev->filename, TAPE_UNLOADED))
+ 	dev->sense[0] |= SENSE_IR;
+ 
+     if (!(dev->fd < 0))
+     {
++    */
+         /* Set load point indicator if tape is at load point */
++/*
+         dev->sense[1] &= ~SENSE1_TAPE_LOADPT;
+         switch (dev->tapedevt)
+         {
+@@ -2732,41 +2754,14 @@
+             if (dev->nxtblkpos == 0 && dev->curfilen == 1)
+                 dev->sense[1] |= SENSE1_TAPE_LOADPT;
+             break;
+-        } /* end switch(dev->tapedevt) */
+-    } /* !(fd < 0) */
++        } 
++	*/
++	/* end switch(dev->tapedevt) */
++    
+ 
+     /* Indicate Drive online to control unit */
+-    dev->sense[1] |= SENSE1_TAPE_TUA;
+ 
+-    /* Set file protect indicator if read-only file */
+-    if (dev->readonly)
+-        dev->sense[1] |= SENSE1_TAPE_FP;
+-    else
+-        dev->sense[1] &= ~SENSE1_TAPE_FP;
+ 
+-    /* Set Error Recovery Action Code */
+-    if (dev->sense[0] & SENSE_IR)
+-        dev->sense[3] = 0x43;
+-    else if (dev->sense[0] & SENSE_CR)
+-        dev->sense[3] = 0x27;
+-    else if (dev->sense[1] & SENSE1_TAPE_FP)
+-        dev->sense[3] = 0x30;
+-    else
+-        dev->sense[3] = 0x29;
+-
+-    /* Set sense bytes for 3420 */
+-    if (dev->devtype != 0x3480)
+-    {
+-//      dev->sense[4] |= 0x20;
+-        dev->sense[5] |= 0xC0;
+-        dev->sense[6] |= 0x03;
+-        dev->sense[13] = 0x80;
+-        dev->sense[14] = 0x01;
+-        dev->sense[15] = 0x00;
+-        dev->sense[16] = 0x01;
+-        dev->sense[19] = 0xFF;
+-        dev->sense[20] = 0xFF;
+-    }
+ 
+ } /* end function build_sense */
+ 
diff --git a/emulators/hercules/pkg-comment b/emulators/hercules/pkg-comment
new file mode 100644
index 000000000000..e302b0543a42
--- /dev/null
+++ b/emulators/hercules/pkg-comment
@@ -0,0 +1 @@
+The Hercules System/370, ESA/390, and z/Architecture Emulator
diff --git a/emulators/hercules/pkg-descr b/emulators/hercules/pkg-descr
new file mode 100644
index 000000000000..773d2abe6fd6
--- /dev/null
+++ b/emulators/hercules/pkg-descr
@@ -0,0 +1,12 @@
+Hercules is an open source software implementation of the mainframe System/370
+and ESA/390 architectures, in addition to the new 64-bit z/Architecture.
+Hercules runs under Linux, Windows 98, Windows NT, and Windows 2000. 
+
+Hercules was created by Roger Bowler and is maintained by Jay Maynard. Jan
+Jaeger designed and implemented many of the advanced features of Hercules,
+including dynamic reconfiguration, integrated console, interpretive execution
+and z/Architecture support. 
+
+WWW: http://www.conmicro.cx/hercules/
+
+- Miguel Mendez <flynn@energyhq.homeip.net>
diff --git a/emulators/hercules/pkg-message b/emulators/hercules/pkg-message
new file mode 100644
index 000000000000..3354373cc808
--- /dev/null
+++ b/emulators/hercules/pkg-message
@@ -0,0 +1,10 @@
+######################################################################
+
+                           IMPORTANT
+  Tape operations and tapecopy are broken in this port (contain Linux
+specific code that has not yet been adapted).
+
+  Be sure to have a look at the docs and edit the hercules.cnf file to
+your needs (The sample is in ${PREFIX}/share/doc/hercules)
+
+######################################################################
diff --git a/emulators/hercules/pkg-plist b/emulators/hercules/pkg-plist
new file mode 100644
index 000000000000..740a041b60f3
--- /dev/null
+++ b/emulators/hercules/pkg-plist
@@ -0,0 +1,31 @@
+bin/cckd2ckd
+bin/cckdcdsk
+bin/cckdcomp
+bin/cckdswap
+bin/ckd2cckd
+bin/dasdinit
+bin/dasdisup
+bin/dasdload
+bin/dasdls
+bin/dasdpdsu
+bin/dmap2hrc
+bin/hercules
+bin/hetget
+bin/hetinit
+bin/hetmap
+bin/hetupd
+bin/tapecopy
+bin/tapemap
+bin/tapesplt
+share/doc/hercules/cckddasd.html
+share/doc/hercules/hercconf.html
+share/doc/hercules/hercfaq.html
+share/doc/hercules/hercinst.html
+share/doc/hercules/herclic.html
+share/doc/hercules/hercload.html
+share/doc/hercules/hercnew.html
+share/doc/hercules/herctcp.html
+share/doc/hercules/hercules.cnf
+share/doc/hercules/hercules.css
+share/doc/hercules/index.html
+@dirrm share/doc/hercules