mail/qmail: Add rc.d script for qmails queue management daemons

PR:		210223
Submitted by:	Dirk Engling <erdgeist@erdgeist.org> (maintainer)

3 files changed, 74 insertions, 4 deletions

diff --git a/mail/qmail/Makefile b/mail/qmail/Makefile
index 969030234fba..ecc23f4c742d 100644
--- a/mail/qmail/Makefile
+++ b/mail/qmail/Makefile
@@ -3,7 +3,7 @@
 
 PORTNAME=	${QMAIL_PORTNAME}
 PORTVERSION?=	${QMAIL_VERSION}
-PORTREVISION?=	2
+PORTREVISION?=	3
 CATEGORIES=	mail
 MASTER_SITES+=	QMAIL
 DISTNAME=	${PORTNAME}-${QMAIL_VERSION}
@@ -326,7 +326,7 @@ SUB_FILES+=	pkg-message
 .endif
 
 .if !defined(SLAVE_LDAP)
-SUB_FILES+=	qmailsmtpd
+SUB_FILES+=	qmailsmtpd qmailsend
 .endif
 
 WRKDIR_doc=	${WRKDIR}/doc
@@ -838,6 +838,7 @@ do-install:
 .endfor
 .if !defined(SLAVE_LDAP)
 	${INSTALL_SCRIPT} ${WRKDIR}/qmailsmtpd ${STAGEDIR}${PREFIX}/boot
+	${INSTALL_SCRIPT} ${WRKDIR}/qmailsend ${STAGEDIR}${PREFIX}/boot
 .endif
 .for i in 1 5 7 8
 	@${MKDIR} ${STAGEDIR}${PREFIX}/man/man$i
diff --git a/mail/qmail/files/qmailsend.in b/mail/qmail/files/qmailsend.in
new file mode 100644
index 000000000000..7a3342f43873
--- /dev/null
+++ b/mail/qmail/files/qmailsend.in
@@ -0,0 +1,66 @@
+#!/bin/sh
+#
+# $FreeBSD$
+#
+# PROVIDE: qmailsend
+# REQUIRE: network
+#
+# The wrapper around qmail's qmail-send, qmail-lspawn, qmail-rspawn and
+# qmail-clean chain.
+#
+# the qmailsend_delivery variable controls where mails should be delivered to:
+#  maildir - qmail-local to ~/Maildir/ (this is the default)
+#  mailbox - qmail-local to ~/Mailbox
+#  proc    - procmail to /var/spool/mail/$USER
+#  V7      - /bin/mail V7 interface to /var/spool/mail/$USER
+#  SVR4    - /bin/mail SVR4 interface to /var/spool/mail/$USER
+#  BSD44   - /usr/libexec/mail.local to /var/spool/mail/$USER
+#
+# Setting qmailsend_dotforward enables support for sendmail style
+# .forward files
+#
+
+. /etc/rc.subr
+
+name=qmailsend
+rcvar=qmailsend_enable
+
+load_rc_config $name
+
+: ${qmailsend_delivery="maildir"}
+: ${qmailsend_dotforward="NO"}
+
+start_cmd="${name}_start"
+command="%%PREFIX%%/bin/qmail-start"
+procname=qmail-send
+
+extra_commands="flush"
+flush_cmd="qmailsend_flush"
+
+pidfile="/var/run/${name}.pid"
+
+qmailsend_start() {
+  case ${qmailsend_delivery} in
+    maildir) command_args='./Maildir/';;
+    mailbox) command_args='./Mailbox';;
+    proc)    command_args='|preline procmail';;
+    V7)      command_args='|preline -f /bin/mail -f "${SENDER:-MAILER-DAEMON}" -d "$USER"';;
+    SVR4)    command_args='|preline -f /bin/mail -r "${SENDER:-MAILER-DAEMON}" -d "$USER"';;
+    BSD44)   command_args='|preline -f /usr/libexec/mail.local -r "${SENDER:-MAILER-DAEMON}" -d "$USER"';;
+    *)       err 1 "Error: Unknown qmailsend delivery method: ${qmailsend_delivery}";;
+  esac
+  if checkyesno qmailsend_dotforward; then
+    command_args='|dot-forward .forward
+'"${command_args}"
+  fi
+
+  exec env - PATH="%%PREFIX%%/bin:$PATH" ${command} \'"${command_args}"\' splogger qmail&
+  /bin/pgrep -P $$ > ${pidfile}
+}
+
+qmailsend_flush() {
+  /bin/pkill -ALRM ${rc_pid}
+}
+
+run_rc_command "$1"
+
diff --git a/mail/qmail/pkg-plist b/mail/qmail/pkg-plist
index 5bec0a356aab..c324466a4aca 100644
--- a/mail/qmail/pkg-plist
+++ b/mail/qmail/pkg-plist
@@ -1,8 +1,10 @@
 @unexec for alias in postmaster root mailer-daemon; do if [ -f %D/alias/.qmail-${alias} ] && [ $(stat -f '%%z' %D/alias/.qmail-${alias}) -eq 0 ]; then rm -f %D/alias/.qmail-${alias}; fi; done
 @exec for alias in postmaster root mailer-daemon; do if ! [ -f %D/alias/.qmail-${alias} ]; then :> %D/alias/.qmail-${alias}; fi; done
 %%RCDLINK%%@unexec rm -f %%LOCALBASE%%/etc/rc.d/qmailsmtpd
-%%RCDLINK%%@exec /bin/ln -fs %D/rc %%LOCALBASE%%/etc/rc.d/qmailsmtpd
-%%RCDLINK%%@exec echo; echo "A %%LOCALBASE%%/etc/rc.d/qmailsmtpd symlink was created. To enable qmail at boot time you need to copy a script to %D/rc.  There are some examples at %D/boot" | /usr/bin/fmt; echo
+%%RCDLINK%%@unexec rm -f %%LOCALBASE%%/etc/rc.d/qmailsend
+%%RCDLINK%%@exec /bin/ln -fs %D/boot/qmailsmtpd %%LOCALBASE%%/etc/rc.d/qmailsmtpd
+%%RCDLINK%%@exec /bin/ln -fs %D/boot/qmailsend %%LOCALBASE%%/etc/rc.d/qmailsend
+%%RCDLINK%%@exec echo; echo "A %%LOCALBASE%%/etc/rc.d/qmailsmtpd and a %%LOCALBASE%%/etc/rc.d/qmailsend symlink were created." | /usr/bin/fmt; echo
 %%LDAP%%bin/auth_dovecot
 %%LDAP%%bin/auth_imap
 %%LDAP%%bin/auth_pop
@@ -90,6 +92,7 @@ bin/tcp-env
 %%NO_LDAP%%boot/proc
 %%NO_LDAP%%boot/proc+df
 %%NO_LDAP%%boot/qmailsmtpd
+%%NO_LDAP%%boot/qmailsend
 %%LDAP%%boot/qmail/log/run
 %%LDAP%%boot/qmail/run
 %%LDAP%%boot/qmail-smtpd/log/run