- Remove xf86-input-wacom to be re-added it with a different name

PR:		ports/128547
Requested by:	flz
Approved by:	gabor

6 files changed, 0 insertions, 521 deletions

diff --git a/x11-drivers/xf86-input-wacom/Makefile b/x11-drivers/xf86-input-wacom/Makefile
deleted file mode 100644
index 18cf8831c08f..000000000000
--- a/x11-drivers/xf86-input-wacom/Makefile
+++ /dev/null
@@ -1,105 +0,0 @@
-# New ports collection makefile for:	xf86-input-wacom
-# Date Created:				24 Oct 2008
-# Whom:					Dominic Fandrey <kamikaze@bsdforen.de>
-#
-# $FreeBSD$
-#
-
-PORTNAME=	xf86-input-wacom
-PORTVERSION=	${WACOM_VERSION:C/-/./g}.${KLD_VERSION}
-CATEGORIES=	x11-drivers kld
-MASTER_SITES=	http://www.chillt.de/bsdwacom/ \
-		${MASTER_SITE_SOURCEFORGE}
-MASTER_SITE_SUBDIR=	linuxwacom
-DISTFILES=	${BSDWACOM}.tbz \
-		${LINUXWACOM}.tar.bz2
-EXTRACT_ONLY=	${BSDWACOM}.tbz
-
-MAINTAINER=	kamikaze@bsdforen.de
-COMMENT=	X.Org Wacom tablet driver and kernel module
-
-MAN4=		wacom.4x
-MANCOMPRESSED=	yes
-
-USE_GMAKE=	yes
-USE_RC_SUBR=	wacom
-
-KMODDIR?=	/boot/modules
-XINPUTMODDIR=	lib/xorg/modules/input
-MAN4DIR=	man/man4
-WRKSRC=		${WRKDIR}
-
-PLIST_SUB+=	KMODDIR=${KMODDIR} \
-		XINPUTMODDIR=${XINPUTMODDIR}
-SUB_LIST:=	${PLIST_SUB}
-SUB_FILES+=	pkg-message
-PKGMESSAGE=	${WRKDIR}/pkg-message
-
-XORG_CAT=	driver
-
-LINUXWACOM=	linuxwacom-${WACOM_VERSION}
-BSDWACOM=	bsdwacom-${KLD_VERSION}
-WACOM_VERSION=	0.8.1-3
-KLD_VERSION=	38
-
-OPTIONS=	UWACOMKLD "Install USB kernel module" On
-
-.include <bsd.port.pre.mk>
-
-.if defined(WITH_UWACOMKLD)
-PLIST_SUB+=	UWACOMKLD="uwacom.ko"
-.else
-PLIST_SUB+=	UWACOMKLD="@noinst UWACOMKLD uwacom.ko"
-.endif
-
-do-configure:
-	@cd ${WRKDIR}/linuxwacom \
-		&& ${LN} -s ${DISTDIR}/${DIST_SUBDIR}/${LINUXWACOM}.tar.bz2 \
-		&& ./run_configure
-
-do-build:
-.if defined(WITH_UWACOMKLD)
-	@cd ${WRKDIR}/uwacom \
-		&& ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_ARGS}
-.endif
-	@cd ${WRKDIR}/linuxwacom/${LINUXWACOM} \
-		&& ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_ARGS}
-
-do-install:
-.if defined(WITH_UWACOMKLD)
-	@${MKDIR} ${KMODDIR}
-	@${INSTALL_KLD} ${WRKDIR}/uwacom/uwacom.ko ${KMODDIR}/
-.endif
-	@${MKDIR} ${PREFIX}/${XINPUTMODDIR} ${PREFIX}/${MAN4DIR}
-	@cd ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/util/ \
-		&& ${GMAKE} install
-	@${INSTALL} ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/xdrv/wacom_drv.so \
-		${PREFIX}/${XINPUTMODDIR}/
-	@${INSTALL_MAN} ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/wacom.4x.gz \
-		${PREFIX}/${MAN4DIR}/
-
-plist: clean configure
-	@${ECHO} "===>  Rebuilding PLIST."
-	@${TOUCH} ${PLIST}
-	@${RM} ${PLIST}
-	@cd ${WRKDIR}/linuxwacom/${LINUXWACOM} \
-		&& ./configure --prefix=${WRKDIR}/plist
-	@${MKDIR} ${WRKDIR}/plist
-	@cd ${WRKDIR}/linuxwacom/${LINUXWACOM}/src/util && ${GMAKE} install
-	@cd ${WRKDIR}/linuxwacom \
-		&& ./run_configure
-	@${FIND} ${WRKDIR}/plist/ -not -type d \
-		| ${SED} "s|${WRKDIR}/plist/||1" \
-		>> ${PLIST}
-	@${FIND} -d ${WRKDIR}/plist/ -mindepth 2 -type d \
-		| ${SED} "s|${WRKDIR}/plist/|@dirrm |1" \
-		>> ${PLIST}
-	@${ECHO} "%%XINPUTMODDIR%%/wacom_drv.so" >> ${PLIST}
-	@${ECHO} "@cwd %%KMODDIR%%" >> ${PLIST}
-	@${ECHO} "%%UWACOMKLD%%" >> ${PLIST}
-
-post-install:
-	@${ECHO} "===>  Displaying pkg-message."
-	@${CAT} ${PKGMESSAGE}
-
-.include <bsd.port.post.mk>
diff --git a/x11-drivers/xf86-input-wacom/distinfo b/x11-drivers/xf86-input-wacom/distinfo
deleted file mode 100644
index 895e30b1301e..000000000000
--- a/x11-drivers/xf86-input-wacom/distinfo
+++ /dev/null
@@ -1,6 +0,0 @@
-MD5 (xorg/driver/bsdwacom-38.tbz) = fae10723e12b5bfc5daea411639f0ed4
-SHA256 (xorg/driver/bsdwacom-38.tbz) = 0d9027b5d781cd520ebe41287b388973465e8d62109c5d3f52d68f12ede03507
-SIZE (xorg/driver/bsdwacom-38.tbz) = 19993
-MD5 (xorg/driver/linuxwacom-0.8.1-3.tar.bz2) = d09b212946e321cc503adf84e243ca99
-SHA256 (xorg/driver/linuxwacom-0.8.1-3.tar.bz2) = cf1ac159d87666d16e2e3bfad81ede93e088b3bf64bb6d2d469adceb2a4c9dee
-SIZE (xorg/driver/linuxwacom-0.8.1-3.tar.bz2) = 1209228
diff --git a/x11-drivers/xf86-input-wacom/files/pkg-message.in b/x11-drivers/xf86-input-wacom/files/pkg-message.in
deleted file mode 100644
index fdf3c418c99c..000000000000
--- a/x11-drivers/xf86-input-wacom/files/pkg-message.in
+++ /dev/null
@@ -1,16 +0,0 @@
-To setup the wacom driver for X and start the kernel module upon boot
-run the following commands as the root user:
-
-# echo 'wacom_enable="YES"' >> /etc/rc.conf
-# %%PREFIX%%/etc/rc.d/wacom setup
-
-You can unload the driver and clean up the Xorg configuration by
-running the following lines before deinstalling:
-# %%PREFIX%%/etc/rc.d/wacom cleanup
-# %%PREFIX%%/etc/rc.d/wacom stop
-
-To activate the driver without rebooting run:
-
-# %%PREFIX%%/etc/rc.d/wacom start
-
-Now (re)plug in your tablet and restart X.
diff --git a/x11-drivers/xf86-input-wacom/files/wacom.in b/x11-drivers/xf86-input-wacom/files/wacom.in
deleted file mode 100644
index 79c8c4357add..000000000000
--- a/x11-drivers/xf86-input-wacom/files/wacom.in
+++ /dev/null
@@ -1,365 +0,0 @@
-#!/bin/sh 
-
-# PROVIDE: wacom
-# REQUIRE: FILESYSTEMS
-#
-# Add the following lines to /etc/rc.conf.local or /etc/rc.conf
-# to enable this service:
-#
-# wacom_enable (bool):   Set to NO by default.
-#               Set it to YES to enable wacom.
-#
-# This script additionally offers setup and cleanup to configure Xorg
-# for use of the driver or remove the configuration settings.
-# The input devices are only added to the first ServerLayout section
-# and also only removed once.
-#
-
-. %%RC_SUBR%%
-
-name="wacom"
-rcvar=${name}_enable
-
-extra_commands="setup cleanup"
-setup_cmd=do_setup
-start_cmd=do_start
-stop_cmd=do_stop
-cleanup_cmd=do_cleanup
-
-#
-# Outputs the location of the Xorg configuration file.
-# Returns 1 if no file could be found.
-#
-get_xorg_conf() {
-	local config_locations config
-
-	# Possible Xorg configuration file locations, taken from the
-	# xorg.conf(5) manual page.
-	config_locations="
-/etc/X11/$XORGCONFIG
-%%PREFIX%%/etc/X11/$XORGCONFIG
-/etc/X11/xorg.conf-4
-/etc/X11/xorg.conf
-/etc/xorg.conf
-%%PREFIX%%/etc/X11/xorg.conf.$HOST
-%%PREFIX%%/etc/X11/xorg.conf-4
-%%PREFIX%%/etc/X11/xorg.conf
-%%PREFIX%%/lib/X11/xorg.conf.$HOST
-%%PREFIX%%/lib/X11/xorg.conf-4
-%%PREFIX%%/lib/X11/xorg.conf
-NONE
-"
-
-	# Find the first matching config file.
-	for config in $config_locations; {
-		test -f "$config" && break
-	}
-
-	if [ "$config" = "NONE" ]; then
-		echo "No Xorg configuration has been found." 1>&2
-		return 1
-	fi
-
-	echo "$config"
-	return 0
-}
-
-#
-# Returns the line number of the first line matching the extended regular
-# expression $2 in the file $1.
-#
-# @param $1
-#	The file to get the line number from.
-# @param $2
-#	An extend regular expression.
-# @stdout
-#	The line number of the first line matching $2.
-#
-get_first() {
-	local result IFS
-	IFS='
-'
-	result="$(/usr/bin/grep -Ein "$2" "$1")"
-	result="${result%%:*}"
-
-	# No match.
-	if [ -z "$result" ]; then
-		return 1
-	fi
-
-	echo "$result"
-	return 0
-}
-
-#
-# Returns the line number of the line before line number $2 that matches the
-# extended regular expression $3 in the file $1.
-#
-# @param $1
-#	The file to get the line number from.
-# @param $2
-#	The line before which the expression should match.
-# @param $3
-#	An extend regular expression.
-# @stdout
-#	The line number of the first line before line $2 matching $3.
-#
-get_before() {
-	local result IFS line length
-	IFS='
-'
-
-	# The length is necessary to make sure the check is run once
-	# again for the last match.
-	length="$(/usr/bin/wc -l "$1")"
-	length=${length% *}
-
-	result=-1
-	for line in $(/usr/bin/grep -Ein "$3" "$1") $(($length + 1)); {
-		line="${line%%:*}"
-
-		# We have passed the line to look for.
-		if [ $line -ge $2 ]; then
-
-			# No match before this line.
-			if [ $result -lt 0 ]; then
-				return 1
-			fi
-
-			echo "$result"
-			return 0
-		fi
-
-		result=$line
-	}
-
-	# No result.
-	return 1
-}
-
-#
-# Returns the line number of the line behind line number $2 that matches the
-# extended regular expression $3 in the file $1.
-#
-# @param $1
-#	The file to get the line number from.
-# @param $2
-#	The line behind which the expression should match.
-# @param $3
-#	An extend regular expression.
-# @stdout
-#	The line number of the first line behind line $2 matching $3.
-#
-get_behind() {
-	local IFS line
-	IFS='
-'
-
-	for line in $(/usr/bin/grep -Ein "$3" "$1"); {
-		line="${line%%:*}"
-
-		# We have passed the line to look for.
-		if [ $line -gt $2 ]; then
-			echo "$line"
-			return 0
-		fi
-	}
-
-	# No result.
-	return 1
-}
-
-#
-# Inserts a line at the end of a section of an Xorg configuration file.
-# Only works on the first matching section.
-#
-section_insert_line() {
-	local file section insert begin end length
-	file="$1"
-	section="$2"
-	insert="$3"
-
-	# Find the beginning of the section.
-	begin="$(get_first "$file" \
-		"^[[:space:]]*Section[[:space:]]+\"$section\"" \
-	)"
-
-	if [ -z "$begin" ]; then
-		echo "Identifying section $section has failed." 1>&2
-		return 1
-	fi
-
-	# Find the end of the section.
-	end="$(get_behind "$file" "$begin" "^[[:space:]]*EndSection")"
-
-	if [ -z "$end" ]; then
-		echo "The section $section is not closed." 1>&2
-		return 2
-	fi
-
-	# Determine the length of the configuration file.
-	length="$(/usr/bin/wc -l "$file")"
-	length=${length% *}
-
-	# Insert the line.
-	/bin/cp "$file" "$file.$$"
-
-	/usr/bin/head -n$(($end - 1)) "$file.$$" > "$file"
-	echo "$insert" >> "$file"
-	/usr/bin/tail -n$(($length - $end + 1)) "$file.$$" >> "$file"
-	
-	/bin/rm "$file.$$"
-}
-
-#
-# Adds the necessary lines to the Xorg configuration.
-#
-do_setup() {
-	local config ident status
-
-	# Get the Xorg configuration file.
-	config="$(get_xorg_conf)"
-	status=$?
-	test $status -ne 0 && return $status
-
-	echo "Setting up configuration in $config."
-
-	# Add all the necessary sections.
-	for ident in stylus eraser cursor pad touch; {
-		if /usr/bin/grep -Eqi "^[[:space:]]*Identifier[[:space:]]+\"$ident\"" "$config"; then
-			echo "Skipping $ident, because it already exists in $config."
-			continue
-		fi
-
-		echo "Inserting $ident."
-
-		echo "Section \"InputDevice\"
-	Driver		\"wacom\"
-	Identifier	\"$ident\"
-	Option		\"Device\"	\"/dev/event0\"
-	Option		\"Type\"	\"$ident\"
-	Option		\"USB\"		\"on\"
-EndSection
-" >> "$config"
-
-		section_insert_line "$config" "ServerLayout" "	InputDevice	\"$ident\"	\"SendCoreEvents\""
-	}
-
-}
-
-#
-# Removes all wacom stuff from the Xorg configuration file. Beware,
-# this also affects handwritten content.
-#
-do_cleanup() {
-	local config status driver i begin last_begin end length ident IFS
-
-	# Get the Xorg configuration file.
-	config="$(get_xorg_conf)"
-	status=$?
-	test $status -ne 0 && return $status
-
-	echo "Removing wacom entries from $config."
-
-	IFS='
-'
-	while true; do
-		# Find a wacom section.
-		driver="$(get_first "$config" \
-			"^[[:space:]]*Driver[[:space:]]+\"wacom\"" \
-		)"
-
-		# Not a numeric, no more wacom sections left.
-		test -z "$driver" && break
-
-		# Find the beginning of the section.
-		begin="$(get_before "$config" "$driver" \
-			"^[[:space:]]*Section[[:space:]]+\"InputDevice\"" \
-		)"
-
-		if [ -z "$begin" ]; then
-			echo "Beginning of wacom driver section" \
-				"could not be found!" 1>&2
-			return 1
-		fi
-
-		# Find the end of the section.
-		end="$(get_behind "$config" "$driver" \
-			"^[[:space:]]*EndSection" \
-		)"
-
-		if [ -z "$end" ]; then
-			echo "The Wacom driver section is" \
-				"not closed properly." 1>&2
-			return 2
-		fi
-
-		# Determine the length of the configuration file.
-		length="$(/usr/bin/wc -l "$config")"
-		length=${length% *}
-
-		# Adjust the end by trailing newlines.
-		while [ $end -lt $length -a \
-			-z "$(/usr/bin/tail -n$(($length - $end)) "$config" \
-			| /usr/bin/head -n1)" ]; do
-			end=$(($end + 1))
-		done
-
-		# Remove the section.
-		/bin/cp "$config" "$config.$$"
-
-		/usr/bin/head -n$(($begin - 1)) "$config.$$" > "$config"
-		/usr/bin/tail -n$(($length - $end)) "$config.$$" >> "$config"
-	
-		/bin/rm "$config.$$"
-	done
-	IFS='	 
-'
-
-	echo "Cleaning up ServerLayout section."
-
-	for ident in stylus eraser cursor pad touch; {
-		driver="$(get_first "$config" \
-			"[[:space:]]*InputDevice[[:space:]]+\"$ident\"" \
-		)"
-
-		# There is no line matching this driver.
-		test -z "$driver" && continue
-
-		# Determine the length of the configuration file.
-		length="$(/usr/bin/wc -l "$config")"
-		length=${length% *}
-
-		# Remove the section.
-		/bin/cp "$config" "$config.$$"
-
-		/usr/bin/head -n$(($driver - 1)) "$config.$$" > "$config"
-		/usr/bin/tail -n$(($length - $driver)) "$config.$$" >> "$config"
-	
-		/bin/rm "$config.$$"
-	}
-}
-
-do_start() {
-	if /sbin/kldstat | /usr/bin/grep -q uwacom; then
-		echo "${name} is already running."
-		return 0
-	fi
-	echo "Starting ${name}."
-	/sbin/kldload %%KMODDIR%%/uwacom.ko
-}
-
-do_stop() {
-	if ! /sbin/kldstat | /usr/bin/grep -q uwacom; then
-		echo "${name} is not running."
-		return 0
-	fi
-	echo "Stopping ${name}."
-	/sbin/kldunload %%KMODDIR%%/uwacom.ko
-}
-
-load_rc_config $name
-
-: ${wacom_enable="NO"}
-
-run_rc_command "$1"
diff --git a/x11-drivers/xf86-input-wacom/pkg-descr b/x11-drivers/xf86-input-wacom/pkg-descr
deleted file mode 100644
index 9d5c1d0ab7f1..000000000000
--- a/x11-drivers/xf86-input-wacom/pkg-descr
+++ /dev/null
@@ -1,17 +0,0 @@
-This package contains the X.Org linuxwacom driver, a Wacom kernel module
-and a script to configure Xorg.
-
-The kernel module is provided by Bartosz Fabianowski <freebsd@chillt.de> and
-supports the following devices:
-	Graphire*, Graphire2*, Graphire3, Graphire4
-	Bamboo, Bamboo One*, Bamboo Fun
-	Intuos3, Cintiq 21UX
-	Volito*, Volito2*
-	PenStation2*, PenPartner2*
-
-* not tested
-
-WWW: http://linuxwacom.sourceforge.net/
-
-- Kamikaze
-kamikaze@bsdforen.de
diff --git a/x11-drivers/xf86-input-wacom/pkg-plist b/x11-drivers/xf86-input-wacom/pkg-plist
deleted file mode 100644
index 991caac094e7..000000000000
--- a/x11-drivers/xf86-input-wacom/pkg-plist
+++ /dev/null
@@ -1,12 +0,0 @@
-lib/libwacomcfg.so.0
-lib/libwacomcfg.so
-lib/libwacomcfg.la
-lib/libwacomcfg.a
-bin/wacdump
-bin/xidump
-bin/xsetwacom
-include/wacomcfg/wacomcfg.h
-@dirrm include/wacomcfg
-%%XINPUTMODDIR%%/wacom_drv.so
-@cwd %%KMODDIR%%
-%%UWACOMKLD%%