9 files changed, 7 insertions, 979 deletions

diff --git a/share/man/man4/man4.i386/Makefile b/share/man/man4/man4.i386/Makefile
index deeba2b38d69d..3e9149210bc98 100644
--- a/share/man/man4/man4.i386/Makefile
+++ b/share/man/man4/man4.i386/Makefile
@@ -1,8 +1,8 @@
-#	$Id: Makefile,v 1.88 1998/12/04 18:01:22 wpaul Exp $
+#	$Id: Makefile,v 1.89 1998/12/22 09:36:29 joerg Exp $
 
 MAN4=	adv.4 adw.4 aha.4 ahb.4 ahc.4 aic.4 alog.4 apm.4 ar.4 asc.4 bktr.4 \
 	bt.4 cs.4 cx.4 cy.4 de.4 \
-	dgb.4 dpt.4 ed.4 eg.4 el.4 en.4 ep.4 ex.4 fdc.4 fe.4 fxp.4 gsc.4 ie.4 \
+	dgb.4 dpt.4 ed.4 el.4 en.4 ep.4 ex.4 fdc.4 fe.4 fxp.4 gsc.4 ie.4 \
 	io.4 joy.4 keyboard.4 labpc.4 le.4 lnc.4 lp.4 lpt.4 matcd.4 mcd.4 \
 	mem.4 meteor.4 mouse.4 mse.4 mtio.4 mx.4 nca.4 ncr.4 npx.4 \
 	pcf.4 pcm.4 pcvt.4 perfmon.4 pn.4 pnp.4 ppc.4 psm.4 \
@@ -29,7 +29,6 @@ MLINKS+=	de.4 ../de.4
 MLINKS+=	dgb.4 ../dgb.4
 MLINKS+=	dpt.4 ../dpt.4
 MLINKS+=	ed.4 ../ed.4
-MLINKS+=	eg.4 ../eg.4
 MLINKS+=	el.4 ../el.4
 MLINKS+=	en.4 ../en.4
 MLINKS+=	ep.4 ../ep.4
diff --git a/share/man/man4/man4.i386/eg.4 b/share/man/man4/man4.i386/eg.4
deleted file mode 100644
index e95bcf995c4d9..0000000000000
--- a/share/man/man4/man4.i386/eg.4
+++ /dev/null
@@ -1,72 +0,0 @@
-.\"
-.\" Copyright (c) 1994 James A. Jegers
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. The name of the author may not be used to endorse or promote products
-.\"    derived from this software without specific prior written permission
-.\" 
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\"	$Id: eg.4,v 1.6 1998/03/12 07:30:31 charnier Exp $
-.\"
-.Dd July 10, 1995
-.Dt EG 4 i386
-.Os
-.Sh NAME
-.Nm eg
-.Nd Ethernet driver for 3Com 3c505 Etherlink+ Ethernet board
-.Sh SYNOPSIS
-.Cd "device eg0 at isa? port 0x310 net irq 5"
-.Sh DESCRIPTION
-The
-.Nm
-interface provides access to a 10 Mb/s Ethernet network via the
-3Com 3c505 board based on the Intel 82586 Ethernet chip. 
-.Sh DIAGNOSTICS
-.Bl -diag
-.It "eg%d: configure card command failed"
-For some reason, the driver could not initialize the card.  Please check
-the card's IRQ and I/O settings relative to those in the kernel
-configuration file.
-.El
-.Pp
-.Sh BUGS
-Uses the onboard firmware, which is not a good way to do it.
-Doesn't support DMA or high speeds.
-Currently the driver does not support multicast.
-The timeout interval can be quite long (16 seconds) for a 512k board.
-.Sh SEE ALSO
-.Xr ed 4 ,
-.Xr el 4 ,
-.Xr ep 4 ,
-.Xr ie 4 ,
-.Xr intro 4 ,
-.Xr le 4 ,
-.Xr ifconfig 8
-.Sh HISTORY
-The
-.Nm
-device driver first appeared in 
-.Fx 2.0.5
-coming from NetBSD.
-.Sh AUTHORS
-The
-.Nm
-device driver was written by
-.An Dean Huxley .
-This manual page was written by
-.An James A. Jegers .
diff --git a/sys/conf/NOTES b/sys/conf/NOTES
index f7a219d77376a..064d099a3d369 100644
--- a/sys/conf/NOTES
+++ b/sys/conf/NOTES
@@ -2,7 +2,7 @@
 # LINT -- config file for checking all the sources, tries to pull in
 #	as much of the source tree as it can.
 #
-#	$Id: LINT,v 1.512 1998/12/27 12:35:35 phk Exp $
+#	$Id: LINT,v 1.513 1998/12/27 12:40:07 phk Exp $
 #
 # NB: You probably don't want to try running a kernel built from this
 # file.  Instead, you should start from GENERIC, and add options from
@@ -1129,7 +1129,6 @@ device ar0 at isa? port 0x300 net irq 10 iomem 0xd0000
 device cs0 at isa? port 0x300 net irq ?
 device cx0 at isa? port 0x240 net irq 15 drq 7
 device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000
-device eg0 at isa? port 0x310 net irq 5
 device el0 at isa? port 0x300 net irq 9
 device ep0 at isa? port 0x300 net irq 10
 device ex0 at isa? port? net irq?
diff --git a/sys/conf/files.i386 b/sys/conf/files.i386
index 18549df96710c..8c1358a209900 100644
--- a/sys/conf/files.i386
+++ b/sys/conf/files.i386
@@ -1,7 +1,7 @@
 # This file tells config what files go into building a kernel,
 # files marked standard are always included.
 #
-#	$Id: files.i386,v 1.207 1998/12/21 18:04:20 joerg Exp $
+#	$Id: files.i386,v 1.208 1998/12/27 12:40:07 phk Exp $
 #
 # The long compile-with and dependency lines are required because of
 # limitations in config: backslash-newline doesn't work in strings, and
@@ -116,7 +116,6 @@ i386/isa/if_ar.c		optional	ar	device-driver
 i386/isa/if_cs.c		optional	cs	device-driver
 i386/isa/if_cx.c		optional	cx	device-driver
 i386/isa/if_ed.c		optional	ed	device-driver
-i386/isa/if_eg.c		optional	eg	device-driver
 i386/isa/if_el.c		optional	el	device-driver
 i386/isa/if_ep.c		optional	ep	device-driver
 i386/isa/if_ex.c		optional	ex	device-driver
diff --git a/sys/i386/conf/LINT b/sys/i386/conf/LINT
index f7a219d77376a..064d099a3d369 100644
--- a/sys/i386/conf/LINT
+++ b/sys/i386/conf/LINT
@@ -2,7 +2,7 @@
 # LINT -- config file for checking all the sources, tries to pull in
 #	as much of the source tree as it can.
 #
-#	$Id: LINT,v 1.512 1998/12/27 12:35:35 phk Exp $
+#	$Id: LINT,v 1.513 1998/12/27 12:40:07 phk Exp $
 #
 # NB: You probably don't want to try running a kernel built from this
 # file.  Instead, you should start from GENERIC, and add options from
@@ -1129,7 +1129,6 @@ device ar0 at isa? port 0x300 net irq 10 iomem 0xd0000
 device cs0 at isa? port 0x300 net irq ?
 device cx0 at isa? port 0x240 net irq 15 drq 7
 device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000
-device eg0 at isa? port 0x310 net irq 5
 device el0 at isa? port 0x300 net irq 9
 device ep0 at isa? port 0x300 net irq 10
 device ex0 at isa? port? net irq?
diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES
index f7a219d77376a..064d099a3d369 100644
--- a/sys/i386/conf/NOTES
+++ b/sys/i386/conf/NOTES
@@ -2,7 +2,7 @@
 # LINT -- config file for checking all the sources, tries to pull in
 #	as much of the source tree as it can.
 #
-#	$Id: LINT,v 1.512 1998/12/27 12:35:35 phk Exp $
+#	$Id: LINT,v 1.513 1998/12/27 12:40:07 phk Exp $
 #
 # NB: You probably don't want to try running a kernel built from this
 # file.  Instead, you should start from GENERIC, and add options from
@@ -1129,7 +1129,6 @@ device ar0 at isa? port 0x300 net irq 10 iomem 0xd0000
 device cs0 at isa? port 0x300 net irq ?
 device cx0 at isa? port 0x240 net irq 15 drq 7
 device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000
-device eg0 at isa? port 0x310 net irq 5
 device el0 at isa? port 0x300 net irq 9
 device ep0 at isa? port 0x300 net irq 10
 device ex0 at isa? port? net irq?
diff --git a/sys/i386/conf/files.i386 b/sys/i386/conf/files.i386
index 18549df96710c..8c1358a209900 100644
--- a/sys/i386/conf/files.i386
+++ b/sys/i386/conf/files.i386
@@ -1,7 +1,7 @@
 # This file tells config what files go into building a kernel,
 # files marked standard are always included.
 #
-#	$Id: files.i386,v 1.207 1998/12/21 18:04:20 joerg Exp $
+#	$Id: files.i386,v 1.208 1998/12/27 12:40:07 phk Exp $
 #
 # The long compile-with and dependency lines are required because of
 # limitations in config: backslash-newline doesn't work in strings, and
@@ -116,7 +116,6 @@ i386/isa/if_ar.c		optional	ar	device-driver
 i386/isa/if_cs.c		optional	cs	device-driver
 i386/isa/if_cx.c		optional	cx	device-driver
 i386/isa/if_ed.c		optional	ed	device-driver
-i386/isa/if_eg.c		optional	eg	device-driver
 i386/isa/if_el.c		optional	el	device-driver
 i386/isa/if_ep.c		optional	ep	device-driver
 i386/isa/if_ex.c		optional	ex	device-driver
diff --git a/sys/i386/isa/if_eg.c b/sys/i386/isa/if_eg.c
deleted file mode 100644
index f0ee1a2c7bff3..0000000000000
--- a/sys/i386/isa/if_eg.c
+++ /dev/null
@@ -1,791 +0,0 @@
-/*
- * Copyright (c) 1993 Dean Huxley <dean@fsa.ca>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by Dean Huxley.
- * 4. The name of Dean Huxley may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * $Id: if_eg.c,v 1.28 1998/06/07 17:10:27 dfr Exp $
- *
- * Support for 3Com 3c505 Etherlink+ card.
- */
-
-/* To do:
- * - multicast
- * - promiscuous
- */
-#include "eg.h"
-#include "bpfilter.h"
-
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/conf.h>
-#include <sys/sockio.h>
-#include <sys/malloc.h>
-#include <sys/mbuf.h>
-#include <sys/socket.h>
-#include <sys/syslog.h>
-
-#include <net/ethernet.h>
-#include <net/if.h>
-#include <net/if_arp.h>
-
-#if NBPFILTER > 0
-#include <net/bpf.h>
-#endif
-
-#include <machine/clock.h>
-
-#include <i386/isa/isa_device.h>
-#include <i386/isa/if_egreg.h>
-
-/* for debugging convenience */
-#ifdef EGDEBUG
-#define dprintf(x) printf x
-#else
-#define dprintf(x)
-#endif
-
-#define EG_INLEN  	10
-#define EG_BUFLEN	0x0670
-
-/*
- * Ethernet software status per interface.
- */
-static struct eg_softc {
-	struct arpcom sc_arpcom;	/* Ethernet common part */
-	int eg_cmd;			/* Command register R/W */
-	int eg_ctl;			/* Control register R/W (EG_CTL_*) */
-	int eg_stat;			/* Status register R/O (EG_STAT_*) */
-	int eg_data;			/* Data register R/W (16 bits) */
-	u_char  eg_rom_major;		/* Cards ROM version (major number) */
-	u_char  eg_rom_minor;		/* Cards ROM version (minor number) */
-	short	eg_ram;			/* Amount of RAM on the card */
-	u_char	eg_pcb[64];		/* Primary Command Block buffer */
-	u_char  eg_incount;		/* Number of buffers currently used */
-	u_char  *eg_inbuf;		/* Incoming packet buffer */
-	u_char	*eg_outbuf;		/* Outgoing packet buffer */
-} eg_softc[NEG];
-
-static int egprobe (struct isa_device *);
-static int egattach (struct isa_device *);
-
-struct isa_driver egdriver = {
-	egprobe, egattach, "eg", 0
-};
-
-static void egprintpcb __P((struct eg_softc *sc));
-static void egprintstat __P((int b));
-static int egoutPCB __P((struct eg_softc *sc, int b));
-static int egreadPCBstat __P((struct eg_softc *sc, int statb));
-static int egreadPCBready __P((struct eg_softc *sc));
-static int egwritePCB __P((struct eg_softc *sc));
-static int egreadPCB __P((struct eg_softc *sc));
-static void eginit __P((struct eg_softc *sc));
-static int egioctl (struct ifnet *, u_long, caddr_t);
-static void egrecv(struct eg_softc *);
-static void egstart(struct ifnet *);
-static ointhand2_t egintr;
-static void egread __P((struct eg_softc *, caddr_t, int));
-static void egstop __P((struct eg_softc *));
-
-static void egwatchdog __P((struct ifnet *));
-static void egreset __P((struct eg_softc *));
-static struct mbuf *egget __P((struct eg_softc *, caddr_t, int));
-
-/*
- * Support stuff
- */
-	
-static void
-egprintpcb(sc)
-	struct eg_softc *sc;
-{
-	int i;
-	
-	for (i = 0; i < sc->eg_pcb[1] + 2; i++)
-		dprintf(("eg#: pcb[%2d] = %x\n", i, sc->eg_pcb[i]));
-}
-
-
-static void
-egprintstat(b)
-	u_char b;
-{
-	dprintf(("eg#: %s %s %s %s %s %s %s\n", 
-		 (b & EG_STAT_HCRE)?"HCRE":"",
-		 (b & EG_STAT_ACRF)?"ACRF":"",
-		 (b & EG_STAT_DIR )?"DIR ":"",
-		 (b & EG_STAT_DONE)?"DONE":"",
-		 (b & EG_STAT_ASF3)?"ASF3":"",
-		 (b & EG_STAT_ASF2)?"ASF2":"",
-		 (b & EG_STAT_ASF1)?"ASF1":""));
-}
-
-static int
-egoutPCB(sc, b)
-	struct eg_softc *sc;
-	u_char b;
-{
-	int i;
-
-	for (i=0; i < 4000; i++) {
-		if (inb(sc->eg_stat) & EG_STAT_HCRE) {
-			outb(sc->eg_cmd, b);
-			return 0;
-		}
-		DELAY(10);
-	}
-	dprintf(("eg#: egoutPCB failed\n"));
-	return 1;
-}
-	
-static int
-egreadPCBstat(sc, statb)
-	struct eg_softc *sc;
-	u_char statb;
-{
-	int i;
-
-	for (i=0; i < 5000; i++) {
-		if ((inb(sc->eg_stat) & EG_PCB_STAT) != EG_PCB_NULL) 
-			break;
-		DELAY(10);
-	}
-	if ((inb(sc->eg_stat) & EG_PCB_STAT) == statb) 
-		return 0;
-	return 1;
-}
-
-static int
-egreadPCBready(sc)
-	struct eg_softc *sc;
-{
-	int i;
-
-	for (i=0; i < 10000; i++) {
-		if (inb(sc->eg_stat) & EG_STAT_ACRF)
-			return 0;
-		DELAY(5);
-	}
-	dprintf(("eg#: PCB read not ready\n"));
-	return 1;
-}
-	
-static int
-egwritePCB(sc)
-	struct eg_softc *sc;
-{
-	int i;
-	u_char len;
-
-	outb(sc->eg_ctl, (inb(sc->eg_ctl) & ~EG_PCB_STAT) | EG_PCB_NULL);
-
-	len = sc->eg_pcb[1] + 2;
-	for (i = 0; i < len; i++)
-		egoutPCB(sc, sc->eg_pcb[i]);
-	
-	for (i=0; i < 4000; i++) {
-		if (inb(sc->eg_stat) & EG_STAT_HCRE)
-			break;
-		DELAY(10);
-	}
-
-	outb(sc->eg_ctl, (inb(sc->eg_ctl) & ~EG_PCB_STAT) | EG_PCB_DONE);
-
-	egoutPCB(sc, len);
-
-	if (egreadPCBstat(sc, EG_PCB_ACCEPT))
-		return 1;
-	return 0;
-}	
-	
-static int
-egreadPCB(sc)
-	struct eg_softc *sc;
-{
-	int i;
-	u_char b;
-	
-	outb(sc->eg_ctl, (inb(sc->eg_ctl) & ~EG_PCB_STAT) | EG_PCB_NULL);
-
-	bzero(sc->eg_pcb, sizeof(sc->eg_pcb));
-
-	if (egreadPCBready(sc))
-		return 1;
-
-	sc->eg_pcb[0] = inb(sc->eg_cmd);
-	
-	if (egreadPCBready(sc))
-		return 1;
-
-	sc->eg_pcb[1] = inb(sc->eg_cmd);
-
-	if (sc->eg_pcb[1] > 62) {
-		dprintf(("eg#: len %d too large\n", sc->eg_pcb[1]));
-		return 1;
-	}
-	
-	for (i = 0; i < sc->eg_pcb[1]; i++) {
-		if (egreadPCBready(sc))
-			return 1;
-		sc->eg_pcb[2+i] = inb(sc->eg_cmd);
-	}
-	if (egreadPCBready(sc))
-		return 1;
-	if (egreadPCBstat(sc, EG_PCB_DONE))
-		return 1;
-	if ((b = inb(sc->eg_cmd)) != sc->eg_pcb[1] + 2) {
-		dprintf(("eg#: %d != %d\n", b, sc->eg_pcb[1] + 2));
-		return 1;
-	}
-
-	outb(sc->eg_ctl, (inb(sc->eg_ctl) & ~EG_PCB_STAT) | EG_PCB_ACCEPT);
-
-	return 0;
-}	
-
-/*
- * Real stuff
- */
-
-static int
-egprobe(struct isa_device * id)
-{
-	struct eg_softc *sc = &eg_softc[id->id_unit];
-	int i;
-
-	if (id->id_iobase & ~0x07f0 != 0) {
-		dprintf(("eg#: Weird iobase %x\n", ia->ia_iobase));
-		return 0;
-	}
-	
-	sc->eg_cmd = id->id_iobase + EG_COMMAND;
-	sc->eg_ctl = id->id_iobase + EG_CONTROL;
-	sc->eg_stat = id->id_iobase + EG_STATUS;
-	sc->eg_data = id->id_iobase + EG_DATA;
-
-	/* hard reset card */
-	outb(sc->eg_ctl, EG_CTL_RESET); 
-	outb(sc->eg_ctl, 0);
-	for (i = 0; i < 1600; i++) {
-		DELAY(10000);
-		if ((inb(sc->eg_stat) & EG_PCB_STAT) == EG_PCB_NULL) 
-			break;
-	}
-	if ((inb(sc->eg_stat) & EG_PCB_STAT) != EG_PCB_NULL) {
-		dprintf(("eg#: eg: Reset failed\n"));
-		return 0;
-	}
-	sc->eg_pcb[0] = EG_CMD_GETINFO; /* Get Adapter Info */
-	sc->eg_pcb[1] = 0;
-	if (egwritePCB(sc) != 0)
-		return 0;
-	
-	if (egreadPCB(sc) != 0) {
-		egprintpcb(sc);
-		return 0;
-	}
-
-	if (sc->eg_pcb[0] != EG_RSP_GETINFO || /* Get Adapter Info Response */
-	    sc->eg_pcb[1] != 0x0a) {
-		egprintpcb(sc);
-		return 0;
-	}
-	sc->eg_rom_major = sc->eg_pcb[3];
-	sc->eg_rom_minor = sc->eg_pcb[2];
-	sc->eg_ram = sc->eg_pcb[6] | (sc->eg_pcb[7] << 8);
-	
-	return 8;
-}
-
-static int 
-egattach(struct isa_device *id)
-{
-	struct eg_softc *sc = &eg_softc[id->id_unit];
-	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
-	
-	id->id_ointr = egintr;
-	egstop(sc);
-
-	sc->eg_pcb[0] = EG_CMD_GETEADDR; /* Get Station address */
-	sc->eg_pcb[1] = 0;
-	if (egwritePCB(sc) != 0) {
-		dprintf(("eg#: write error\n"));
-		return 0;
-	}	
-	if (egreadPCB(sc) != 0) {
-		dprintf(("eg#: read error\n"));
-		egprintpcb(sc);
-		return 0;
-	}
-
-	/* check Get station address response */
-	if (sc->eg_pcb[0] != EG_RSP_GETEADDR || sc->eg_pcb[1] != 0x06) { 
-		dprintf(("eg#: parse error\n"));
-		egprintpcb(sc);
-		return 0;
-	}
-	bcopy(&sc->eg_pcb[2], sc->sc_arpcom.ac_enaddr, ETHER_ADDR_LEN);
-
-	printf("eg%d: address %6D, type=3COM 3c505 (v%d.%02d, %dk)\n",
-	    id->id_unit, sc->sc_arpcom.ac_enaddr, ":",
-	    sc->eg_rom_major, sc->eg_rom_minor, sc->eg_ram);
-
-	sc->eg_pcb[0] = EG_CMD_SETEADDR; /* Set station address */
-	if (egwritePCB(sc) != 0) {
-		dprintf(("eg#: write error2\n"));
-		return 0;
-	}
-	if (egreadPCB(sc) != 0) {
-		dprintf(("eg#: read error2\n"));
-		egprintpcb(sc);
-		return 0;
-	}
-	if (sc->eg_pcb[0] != EG_RSP_SETEADDR || sc->eg_pcb[1] != 0x02 ||
-	    sc->eg_pcb[2] != 0 || sc->eg_pcb[3] != 0) {
-		dprintf(("eg#: parse error2\n"));
-		egprintpcb(sc);
-		return 0;
-	}
-
-	/* Initialize ifnet structure. */
-	ifp->if_softc = sc;
-	ifp->if_unit = id->id_unit;
-	ifp->if_name = "eg";
-	ifp->if_output = ether_output;
-	ifp->if_start = egstart;
-	ifp->if_ioctl = egioctl;
-	ifp->if_init = (if_init_f_t*)eginit;
-	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX;
-	ifp->if_watchdog = egwatchdog;
-	
-	/* Now we can attach the interface. */
-	if_attach(ifp);
-	ether_ifattach(ifp);
-
-#if NBPFILTER > 0
-	bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header));
-#endif
-
-	return 1;
-}
-
-static void
-eginit(struct eg_softc *sc)
-{
-	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
-
-	/* soft reset the board */
-	outb(sc->eg_ctl, EG_CTL_FLSH);
-	DELAY(100);
-	outb(sc->eg_ctl, EG_CTL_ATTN);
-	DELAY(100);
-	outb(sc->eg_ctl, 0);
-	DELAY(200);
-
-	sc->eg_pcb[0] = EG_CMD_CONFIG82586; /* Configure 82586 */
-	sc->eg_pcb[1] = 2;
-	sc->eg_pcb[2] = 3; /* receive broadcast & multicast */
-	sc->eg_pcb[3] = 0;
-#ifdef EGDEBUG
-	if (egwritePCB(sc) != 0)
-		dprintf(("eg#: write error3\n"));
-#endif
-
-	if (egreadPCB(sc) != 0) {
-		dprintf(("eg#: read error\n"));
-		egprintpcb(sc);
-	} else if (sc->eg_pcb[2] != 0 || sc->eg_pcb[3] != 0)
-		printf("eg%d: configure card command failed\n", ifp->if_unit);
-
-	if (sc->eg_inbuf == NULL)
-		sc->eg_inbuf = malloc(EG_BUFLEN, M_TEMP, M_NOWAIT);
-	sc->eg_incount = 0;
-
-	if (sc->eg_outbuf == NULL)
-		sc->eg_outbuf = malloc(EG_BUFLEN, M_TEMP, M_NOWAIT);
-
-	outb(sc->eg_ctl, EG_CTL_CMDE);
-
-	sc->eg_incount = 0;
-	egrecv(sc);
-
-	/* Interface is now `running', with no output active. */
-	ifp->if_flags |= IFF_RUNNING;
-	ifp->if_flags &= ~IFF_OACTIVE;
-
-	/* Attempt to start output, if any. */
-	egstart(ifp);
-}
-
-static void
-egrecv(sc)
-	struct eg_softc *sc;
-{
-
-	while (sc->eg_incount < EG_INLEN) {
-		sc->eg_pcb[0] = EG_CMD_RECVPACKET;
-		sc->eg_pcb[1] = 0x08;
-		sc->eg_pcb[2] = 0; /* address not used.. we send zero */
-		sc->eg_pcb[3] = 0;
-		sc->eg_pcb[4] = 0;
-		sc->eg_pcb[5] = 0;
-		sc->eg_pcb[6] = EG_BUFLEN & 0xff; /* our buffer size */
-		sc->eg_pcb[7] = (EG_BUFLEN >> 8) & 0xff;
-		sc->eg_pcb[8] = 0; /* timeout, 0 == none */
-		sc->eg_pcb[9] = 0;
-		if (egwritePCB(sc) != 0)
-			break;
-		sc->eg_incount++;
-	}
-}
-
-static void
-egstart(ifp)
-	struct ifnet *ifp;
-{
-	register struct eg_softc *sc = ifp->if_softc;
-	struct mbuf *m0, *m;
-	caddr_t buffer;
-	int len;
-	u_short *ptr;
-
-	/* Don't transmit if interface is busy or not running */
-	if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING)
-		return;
-
-loop:
-	/* Dequeue the next datagram. */
-	IF_DEQUEUE(&ifp->if_snd, m0);
-	if (m0 == 0)
-		return;
-	
-	ifp->if_flags |= IFF_OACTIVE;
-
-	/* We need to use m->m_pkthdr.len, so require the header */
-	if ((m0->m_flags & M_PKTHDR) == 0)
-		panic("egstart: no header mbuf");
-	len = max(m0->m_pkthdr.len, ETHER_MIN_LEN);
-
-#if NBPFILTER > 0
-	if (ifp->if_bpf)
-		bpf_mtap(ifp, m0);
-#endif
-
-	sc->eg_pcb[0] = EG_CMD_SENDPACKET;
-	sc->eg_pcb[1] = 0x06;
-	sc->eg_pcb[2] = 0; /* address not used, we send zero */
-	sc->eg_pcb[3] = 0;
-	sc->eg_pcb[4] = 0;
-	sc->eg_pcb[5] = 0;
-	sc->eg_pcb[6] = len; /* length of packet */
-	sc->eg_pcb[7] = len >> 8;
-	if (egwritePCB(sc) != 0) {
-		dprintf(("eg#: egwritePCB in egstart failed\n"));
-		ifp->if_oerrors++;
-		ifp->if_flags &= ~IFF_OACTIVE;
-		goto loop;
-	}
-
-	buffer = sc->eg_outbuf;
-	for (m = m0; m != 0; m = m->m_next) {
-		bcopy(mtod(m, caddr_t), buffer, m->m_len);
-		buffer += m->m_len;
-	}
-
-	/* set direction bit: host -> adapter */
-	outb(sc->eg_ctl, inb(sc->eg_ctl) & ~EG_CTL_DIR); 
-	
-	for (ptr = (u_short *) sc->eg_outbuf; len > 0; len -= 2) {
-		outw(sc->eg_data, *ptr++);
-		while (!(inb(sc->eg_stat) & EG_STAT_HRDY))
-			; /* XXX need timeout here */
-	}
-	
-	m_freem(m0);
-}
-
-static void
-egintr(int unit)
-{
-	register struct eg_softc *sc = &eg_softc[unit];
-	int i, len;
-	u_short *ptr;
-
-	while (inb(sc->eg_stat) & EG_STAT_ACRF) {
-		egreadPCB(sc);
-		switch (sc->eg_pcb[0]) {
-		case EG_RSP_RECVPACKET:
-			len = sc->eg_pcb[6] | (sc->eg_pcb[7] << 8);
-	
-			/* Set direction bit : Adapter -> host */
-			outb(sc->eg_ctl, inb(sc->eg_ctl) | EG_CTL_DIR); 
-
-			for (ptr = (u_short *) sc->eg_inbuf; len > 0; len -= 2) {
-				while (!(inb(sc->eg_stat) & EG_STAT_HRDY))
-					;
-				*ptr++ = inw(sc->eg_data);
-			}
-
-			len = sc->eg_pcb[8] | (sc->eg_pcb[9] << 8);
-			egread(sc, sc->eg_inbuf, len);
-
-			sc->eg_incount--;
-			egrecv(sc);
-			break;
-
-		case EG_RSP_SENDPACKET:
-			if (sc->eg_pcb[6] || sc->eg_pcb[7]) {
-				dprintf(("eg#: packet dropped\n"));
-				sc->sc_arpcom.ac_if.if_oerrors++;
-			} else
-				sc->sc_arpcom.ac_if.if_opackets++;
-			sc->sc_arpcom.ac_if.if_collisions += sc->eg_pcb[8] & 0xf;
-			sc->sc_arpcom.ac_if.if_flags &= ~IFF_OACTIVE;
-			egstart(&sc->sc_arpcom.ac_if);
-			break;
-
-		case EG_RSP_GETSTATS:
-			dprintf(("eg#: Card Statistics\n"));
-			bcopy(&sc->eg_pcb[2], &i, sizeof(i));
-			dprintf(("eg#: Receive Packets %d\n", i));
-			bcopy(&sc->eg_pcb[6], &i, sizeof(i));
-			dprintf(("eg#: Transmit Packets %d\n", i));
-			dprintf(("eg#: CRC errors %d\n", *(short*) &sc->eg_pcb[10]));
-			dprintf(("eg#: alignment errors %d\n", *(short*) &sc->eg_pcb[12]));
-			dprintf(("eg#: no resources errors %d\n", *(short*) &sc->eg_pcb[14]));
-			dprintf(("eg#: overrun errors %d\n", *(short*) &sc->eg_pcb[16]));
-			break;
-			
-		default:
-			dprintf(("eg#: egintr: Unknown response %x??\n",
-			    sc->eg_pcb[0]));
-			egprintpcb(sc);
-			break;
-		}
-	}
-
-	return;
-}
-
-/*
- * Pass a packet up to the higher levels.
- */
-static void
-egread(sc, buf, len)
-	struct eg_softc *sc;
-	caddr_t buf;
-	int len;
-{
-	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
-	struct mbuf *m;
-	struct ether_header *eh;
-	
-	if (len <= sizeof(struct ether_header) ||
-	    len > ETHER_MAX_LEN) {
-		printf("eg#: invalid packet size %d; dropping\n", len);
-		ifp->if_ierrors++;
-		return;
-	}
-
-	/* Pull packet off interface. */
-	m = egget(sc, buf, len);
-	if (m == 0) {
-		ifp->if_ierrors++;
-		return;
-	}
-
-	ifp->if_ipackets++;
-
-	/* We assume the header fit entirely in one mbuf. */
-	eh = mtod(m, struct ether_header *);
-
-#if NBPFILTER > 0
-	/*
-	 * Check if there's a BPF listener on this interface.
-	 * If so, hand off the raw packet to BPF.
-	 */
-	if (ifp->if_bpf) {
-		bpf_mtap(ifp, m);
-
-		/*
-		 * Note that the interface cannot be in promiscuous mode if
-		 * there are no BPF listeners.  And if we are in promiscuous
-		 * mode, we have to check if this packet is really ours.
-		 */
-		if ((ifp->if_flags & IFF_PROMISC) &&
-		    (eh->ether_dhost[0] & 1) == 0 && /* !mcast and !bcast */
-		    bcmp(eh->ether_dhost, sc->sc_arpcom.ac_enaddr,
-			    sizeof(eh->ether_dhost)) != 0) {
-			m_freem(m);
-			return;
-		}
-	}
-#endif
-
-	/* We assume the header fit entirely in one mbuf. */
-	m_adj(m, sizeof(struct ether_header));
-	ether_input(ifp, eh, m);
-}
-
-/*
- * convert buf into mbufs
- */
-static struct mbuf *
-egget(sc, buf, totlen)
-	struct eg_softc *sc;
-	caddr_t buf;
-	int totlen;
-{
-	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
-	struct mbuf *top, **mp, *m;
-	int len;
-
-	MGETHDR(m, M_DONTWAIT, MT_DATA);
-	if (m == 0)
-		return 0;
-	m->m_pkthdr.rcvif = ifp;
-	m->m_pkthdr.len = totlen;
-	len = MHLEN;
-	top = 0;
-	mp = &top;
-
-	while (totlen > 0) {
-		if (top) {
-			MGET(m, M_DONTWAIT, MT_DATA);
-			if (m == 0) {
-				m_freem(top);
-				return 0;
-			}
-			len = MLEN;
-		}
-		if (totlen >= MINCLSIZE) {
-			MCLGET(m, M_DONTWAIT);
-			if (m->m_flags & M_EXT)
-				len = MCLBYTES;
-		}
-		m->m_len = len = min(totlen, len);
-		bcopy((caddr_t)buf, mtod(m, caddr_t), len);
-		buf += len;
-		totlen -= len;
-		*mp = m;
-		mp = &m->m_next;
-	}
-
-	return top;
-}
-
-static int
-egioctl(ifp, command, data)
-	register struct ifnet *ifp;
-	u_long command;
-	caddr_t data;
-{
-	struct eg_softc *sc = ifp->if_softc;
-	int s, error = 0;
-
-	s = splnet();
-
-	switch (command) {
-
-	case SIOCSIFADDR:
-	case SIOCGIFADDR:
-	case SIOCSIFMTU:
-		error = ether_ioctl(ifp, command, data);
-		break;
-
-	case SIOCSIFFLAGS:
-		if ((ifp->if_flags & IFF_UP) == 0 &&
-		    (ifp->if_flags & IFF_RUNNING) != 0) {
-			/*
-			 * If interface is marked down and it is running, then
-			 * stop it.
-			 */
-			egstop(sc);
-			ifp->if_flags &= ~IFF_RUNNING;
-		} else if ((ifp->if_flags & IFF_UP) != 0 &&
-			   (ifp->if_flags & IFF_RUNNING) == 0) {
-			/*
-			 * If interface is marked up and it is stopped, then
-			 * start it.
-			 */
-			eginit(sc);
-		} else {
-			sc->eg_pcb[0] = EG_CMD_GETSTATS;
-			sc->eg_pcb[1] = 0;
-#ifdef EGDEBUG
-			if (egwritePCB(sc) != 0)
-				dprintf(("eg#: write error\n"));
-#endif
-			/*
-			 * XXX deal with flags changes:
-			 * IFF_MULTICAST, IFF_PROMISC,
-			 * IFF_LINK0, IFF_LINK1,
-			 */
-		}
-		break;
-
-	default:
-		error = EINVAL;
-		break;
-	}
-
-	splx(s);
-	return error;
-}
-
-static void
-egreset(sc)
-	struct eg_softc *sc;
-{
-	int s;
-
-	dprintf(("eg#: egreset()\n"));
-	s = splnet();
-	egstop(sc);
-	eginit(sc);
-	splx(s);
-}
-
-static void
-egwatchdog(ifp)
-	struct ifnet *ifp;
-{
-	struct eg_softc *sc = ifp->if_softc;
-
-	log(LOG_ERR, "%s: device timeout\n", "eg#");
-	sc->sc_arpcom.ac_if.if_oerrors++;
-
-	egreset(sc);
-}
-
-static void
-egstop(sc)
-	register struct eg_softc *sc;
-{
-	
-	outb(sc->eg_ctl, 0);
-}
diff --git a/sys/i386/isa/if_egreg.h b/sys/i386/isa/if_egreg.h
deleted file mode 100644
index 9067a58383d94..0000000000000
--- a/sys/i386/isa/if_egreg.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (c) 1993 Dean Huxley (dean@fsa.ca)
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by Dean Huxley.
- * 4. The name of Dean Huxley may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * Register offsets from base.
- */
-#define EG_COMMAND	0x00
-#define EG_STATUS	0x02
-#define EG_DATA		0x04
-#define EG_CONTROL	0x06
-
-/*
- * Host Control Register bits
- * EG_CTL_ATTN - does a soft reset
- * EG_CTL_FLSH - flushes the data register
- * EG_CTL_RESET - does a hard reset
- * EG_CTL_DMAE - Used with DIR bit, enables DMA transfers to/from data reg.
- * EG_CTL_DIR  - if clear then host -> adapter, if set then adapter -> host
- * EG_CTL_TCEN - terminal count enable. enables host interrupt after DMA.
- * EG_CTL_CMDE - command reg interrupt enable. (when it is written)
- * EG_CTL_HSF1 - Host status flag 1
- * EG_CTL_HSF2 - Host status flag 2
- */
-
-#define EG_CTL_ATTN 0x80
-#define EG_CTL_FLSH 0x40
-#define EG_CTL_RESET (EG_CTL_ATTN|EG_CTL_FLSH)
-#define EG_CTL_DMAE 0x20
-#define EG_CTL_DIR  0x10
-#define EG_CTL_TCEN 0x08
-#define EG_CTL_CMDE 0x04
-#define EG_CTL_HSF2 0x02
-#define EG_CTL_HSF1 0x01
-
-/*
- * Host Status Register bits
- * EG_STAT_HRDY - Data Register ready 
- * EG_STAT_HCRE - Host Command Register empty
- * EG_STAT_ACRF - Adapter Command register full
- * EG_STAT_DIR  - Direction flag, 0 = host -> adapter, 1 = adapter -> host
- * EG_STAT_DONE - DMA done
- * EG_STAT_ASF1 - Adapter status flag 1
- * EG_STAT_ASF2 - Adapter status flag 2
- * EG_STAT_ASF3 - Adapter status flag 3
- */
-
-#define EG_STAT_HRDY 0x80
-#define EG_STAT_HCRE 0x40
-#define EG_STAT_ACRF 0x20
-#define EG_STAT_DIR  0x10
-#define EG_STAT_DONE 0x08
-#define EG_STAT_ASF3 0x04
-#define EG_STAT_ASF2 0x02
-#define EG_STAT_ASF1 0x01
-
-#define	EG_PCB_NULL	0x00
-#define EG_PCB_ACCEPT	0x01 
-#define EG_PCB_REJECT	0x02
-#define EG_PCB_DONE	0x03
-#define EG_PCB_STAT	0x03
-
-#define EG_CMD_CONFIG82586	0x02
-#define EG_CMD_GETEADDR		0x03
-#define EG_CMD_RECVPACKET	0x08
-#define EG_CMD_SENDPACKET	0x09
-#define EG_CMD_GETSTATS		0x0a
-#define EG_CMD_SETEADDR		0x10
-#define EG_CMD_GETINFO		0x11
-
-#define EG_RSP_CONFIG82586	0x32
-#define EG_RSP_GETEADDR		0x33
-#define EG_RSP_RECVPACKET	0x38
-#define EG_RSP_SENDPACKET	0x39
-#define EG_RSP_GETSTATS		0x3a
-#define EG_RSP_SETEADDR		0x40
-#define EG_RSP_GETINFO		0x41