2 files changed, 0 insertions, 1478 deletions

diff --git a/sys/dev/sab/sab.c b/sys/dev/sab/sab.c
deleted file mode 100644
index 462ea52e5822d..0000000000000
--- a/sys/dev/sab/sab.c
+++ /dev/null
@@ -1,1158 +0,0 @@
-/*	$OpenBSD: sab.c,v 1.7 2002/04/08 17:49:42 jason Exp $	*/
-
-/*-
- * Copyright (c) 2001 Jason L. Wright (jason@thought.net)
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by Jason L. Wright
- * 4. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * Effort sponsored in part by the Defense Advanced Research Projects
- * Agency (DARPA) and Air Force Research Laboratory, Air Force
- * Materiel Command, USAF, under agreement number F30602-01-2-0537.
- */
-
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD$");
-
-/*
- * SAB82532 Dual UART driver
- */
-
-#include "opt_comconsole.h"
-
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/bus.h>
-#include <sys/conf.h>
-#include <sys/cons.h>
-#include <sys/fcntl.h>
-#include <sys/interrupt.h>
-#include <sys/kdb.h>
-#include <sys/kernel.h>
-#include <sys/ktr.h>
-#include <sys/mutex.h>
-#include <sys/module.h>
-#include <sys/proc.h>
-
-#include <dev/ofw/ofw_bus.h>
-#include <dev/ofw/openfirm.h>
-
-#include <machine/bus.h>
-#include <machine/resource.h>
-
-#include <sys/rman.h>
-#include <sys/serial.h>
-#include <sys/syslog.h>
-#include <sys/tty.h>
-
-#include <dev/sab/sab82532reg.h>
-
-#define	SAB_READ(sc, r) \
-	bus_space_read_1((sc)->sc_bt, (sc)->sc_bh, (r))
-#define	SAB_WRITE(sc, r, v) \
-	bus_space_write_1((sc)->sc_bt, (sc)->sc_bh, (r), (v))
-
-#define	SABTTY_LOCK(sc)		mtx_lock_spin(&sc->sc_mtx)
-#define	SABTTY_UNLOCK(sc)	mtx_unlock_spin(&sc->sc_mtx)
-
-struct sabtty_softc {
-	device_t		sc_dev;
-	struct sab_softc	*sc_parent;
-	bus_space_tag_t		sc_bt;
-	bus_space_handle_t	sc_bh;
-	struct tty		*sc_tty;
-	int			sc_channel;
-	int			sc_icnt;
-	uint8_t			*sc_iput;
-	uint8_t			*sc_iget;
-	int			sc_ocnt;
-	uint8_t			*sc_oget;
-	int			sc_alt_break_state;
-	struct mtx		sc_mtx;
-	uint8_t			sc_console;
-	uint8_t			sc_tx_done;
-	uint8_t			sc_pvr_dtr;
-	uint8_t			sc_pvr_dsr;
-	uint8_t			sc_imr0;
-	uint8_t			sc_imr1;
-	uint8_t			sc_ibuf[CBLOCK];
-	uint8_t			sc_obuf[CBLOCK];
-};
-
-struct sab_softc {
-	device_t		sc_dev;
-	bus_space_tag_t		sc_bt;
-	bus_space_handle_t	sc_bh;
-	struct sabtty_softc	*sc_child[SAB_NCHAN];
-	void			*sc_ih;
-	void			*sc_softih;
-	struct resource		*sc_irqres;
-	int			sc_irqrid;
-	struct resource		*sc_iores;
-	int			sc_iorid;
-	uint8_t			sc_ipc;
-};
-
-static int sab_probe(device_t dev);
-static int sab_attach(device_t dev);
-static int sab_detach(device_t dev);
-
-static void sab_intr(void *vsc);
-static void sab_softintr(void *vsc);
-static void sab_shutdown(void *vsc);
-
-static int sabtty_probe(device_t dev);
-static int sabtty_attach(device_t dev);
-static int sabtty_detach(device_t dev);
-
-static int sabtty_intr(struct sabtty_softc *sc);
-static void sabtty_softintr(struct sabtty_softc *sc);
-static void sabttybreak(struct tty *tp, int brk);
-static int sabttymodem(struct tty *tp, int biton, int bitoff);
-static int sabtty_param(struct sabtty_softc *sc, struct tty *tp,
-    struct termios *t);
-static void sabtty_cec_wait(struct sabtty_softc *sc);
-static void sabtty_tec_wait(struct sabtty_softc *sc);
-static void sabtty_reset(struct sabtty_softc *sc);
-static void sabtty_flush(struct sabtty_softc *sc);
-static int sabtty_speed(int);
-static int sabtty_console(device_t dev, char *mode, int len);
-
-static cn_probe_t sab_cnprobe;
-static cn_init_t sab_cninit;
-static cn_term_t sab_cnterm;
-static cn_getc_t sab_cngetc;
-static cn_checkc_t sab_cncheckc;
-static cn_putc_t sab_cnputc;
-static cn_dbctl_t sab_cndbctl;
-
-static int sabtty_cngetc(struct sabtty_softc *sc);
-static int sabtty_cncheckc(struct sabtty_softc *sc);
-static void sabtty_cnputc(struct sabtty_softc *sc, int c);
-
-static t_open_t sabttyopen;
-
-static void sabttystart(struct tty *tp);
-static void sabttystop(struct tty *tp, int rw);
-static int sabttyparam(struct tty *tp, struct termios *t);
-
-static device_method_t sab_methods[] = {
-	DEVMETHOD(device_probe,		sab_probe),
-	DEVMETHOD(device_attach,	sab_attach),
-	DEVMETHOD(device_detach,	sab_detach),
-
-	DEVMETHOD(bus_print_child,	bus_generic_print_child),
-
-	{ 0, 0 }
-};
-
-static device_method_t sabtty_methods[] = {
-	DEVMETHOD(device_probe,		sabtty_probe),
-	DEVMETHOD(device_attach,	sabtty_attach),
-	DEVMETHOD(device_detach,	sabtty_detach),
-
-	{ 0, 0 }
-};
-
-static driver_t sab_driver = {
-	"sab",
-	sab_methods,
-	sizeof(struct sab_softc),
-};
-
-static driver_t sabtty_driver = {
-	"sabtty",
-	sabtty_methods,
-	sizeof(struct sabtty_softc),
-};
-
-static devclass_t sab_devclass;
-static devclass_t sabtty_devclass;
-
-static struct sabtty_softc *sabtty_cons;
-
-DRIVER_MODULE(sab, ebus, sab_driver, sab_devclass, 0, 0);
-DRIVER_MODULE(sabtty, sab, sabtty_driver, sabtty_devclass, 0, 0);
-
-CONS_DRIVER(sab, sab_cnprobe, sab_cninit, sab_cnterm, sab_cngetc,
-    sab_cncheckc, sab_cnputc, sab_cndbctl);
-
-struct sabtty_rate {
-	int baud;
-	int n, m;
-};
-
-struct sabtty_rate sabtty_baudtable[] = {
-	{      50,	35,     10 },
-	{      75,	47,	9 },
-	{     110,	32,	9 },
-	{     134,	53,	8 },
-	{     150,	47,	8 },
-	{     200,	35,	8 },
-	{     300,	47,	7 },
-	{     600,	47,	6 },
-	{    1200,	47,	5 },
-	{    1800,	31,	5 },
-	{    2400,	47,	4 },
-	{    4800,	47,	3 },
-	{    9600,	47,	2 },
-	{   19200,	47,	1 },
-	{   38400,	23,	1 },
-	{   57600,	15,	1 },
-	{  115200,	 7,	1 },
-	{  230400,	 3,	1 },
-	{  460800,	 1,	1 },
-	{   76800,	11,	1 },
-	{  153600,	 5,	1 },
-	{  307200,	 3,	1 },
-	{  614400,	 3,	0 },
-	{  921600,	 0,	1 },
-};
-
-static int
-sab_probe(device_t dev)
-{
-	struct resource *res;
-	bus_space_handle_t handle;
-	bus_space_tag_t tag;
-	uint8_t r;
-	int rid;
-	const char *name;
-
-	name = ofw_bus_get_name(dev);
-	if (strcmp(name, "se") != 0 && strcmp(name, "serial") != 0)
-		return (ENXIO);
-	rid = 0;
-	res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
-	    RF_ACTIVE);
-	if (res == NULL)
-		return (ENXIO);
-	tag = rman_get_bustag(res);
-	handle = rman_get_bushandle(res);
-	r = bus_space_read_1(tag, handle, SAB_VSTR) & SAB_VSTR_VMASK;
-	switch (r) {
-	case SAB_VSTR_V_1:
-		device_set_desc(dev, "Siemens SAB 82532 v1");
-		break;
-	case SAB_VSTR_V_2:
-		device_set_desc(dev, "Siemens SAB 82532 v2");
-		break;
-	case SAB_VSTR_V_32:
-		device_set_desc(dev, "Siemens SAB 82532 v3.2");
-		break;
-	default:
-		device_set_desc(dev, "Siemens SAB 82532 ???");
-		break;
-	}
-	bus_release_resource(dev, SYS_RES_MEMORY, rid, res);
-	return (0);
-}
-
-static int
-sab_attach(device_t dev)
-{
-	struct device *child[SAB_NCHAN];
-	struct resource *irqres;
-	struct resource *iores;
-	struct sab_softc *sc;
-	int irqrid;
-	int iorid;
-	int i;
-
-	iorid = 0;
-	irqrid = 0;
-	irqres = NULL;
-	sc = device_get_softc(dev);
-	iores = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &iorid,
-	    RF_ACTIVE);
-	if (iores == NULL)
-		goto error;
-	irqres = bus_alloc_resource_any(dev, SYS_RES_IRQ, &irqrid,
-	    RF_ACTIVE);
-	if (irqres == NULL)
-		goto error;
-	if (bus_setup_intr(dev, irqres, INTR_TYPE_TTY | INTR_FAST, sab_intr,
-	    sc, &sc->sc_ih) != 0)
-		goto error;
-	sc->sc_dev = dev;
-	sc->sc_irqres = irqres;
-	sc->sc_iores = iores;
-	sc->sc_iorid = iorid;
-	sc->sc_irqres = irqres;
-	sc->sc_irqrid = irqrid;
-	sc->sc_bt = rman_get_bustag(iores);
-	sc->sc_bh = rman_get_bushandle(iores);
-
-	/* Set all pins, except DTR pins to be inputs */
-	SAB_WRITE(sc, SAB_PCR, ~(SAB_PVR_DTR_A | SAB_PVR_DTR_B));
-	/* Disable port interrupts */
-	SAB_WRITE(sc, SAB_PIM, 0xff);
-	SAB_WRITE(sc, SAB_PVR, SAB_PVR_DTR_A | SAB_PVR_DTR_B | SAB_PVR_MAGIC);
-	sc->sc_ipc = SAB_IPC_ICPL | SAB_IPC_VIS;
-	SAB_WRITE(sc, SAB_IPC, sc->sc_ipc);
-
-	for (i = 0; i < SAB_NCHAN; i++)
-		child[i] = device_add_child(dev, "sabtty", -1);
-	bus_generic_attach(dev);
-	for (i = 0; i < SAB_NCHAN; i++)
-		sc->sc_child[i] = device_get_softc(child[i]);
-
-	swi_add(&tty_intr_event, "sab", sab_softintr, sc, SWI_TTY,
-	    INTR_TYPE_TTY, &sc->sc_softih);
-
-	if (sabtty_cons != NULL) {
-		DELAY(50000);
-		cninit();
-	}
-
-	EVENTHANDLER_REGISTER(shutdown_final, sab_shutdown, sc,
-	    SHUTDOWN_PRI_DEFAULT);
-
-	return (0);
-
-error:
-	if (irqres != NULL)
-		bus_release_resource(dev, SYS_RES_IRQ, irqrid, irqres);
-	if (iores != NULL)
-		bus_release_resource(dev, SYS_RES_IRQ, iorid, iores);
-	return (ENXIO);
-}
-
-static int
-sab_detach(device_t dev)
-{
-	struct sab_softc *sc;
-
-	sc = device_get_softc(dev);
-	bus_generic_detach(dev);
-	if (sc->sc_iores != NULL)
-		bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_iorid,
-		    sc->sc_iores);
-	return (0);
-}
-
-static void
-sab_intr(void *v)
-{
-	struct sab_softc *sc = v;
-	int needsoft = 0;
-	uint8_t gis;
-
-	gis = SAB_READ(sc, SAB_GIS);
-
-	/* channel A */
-	if ((gis & (SAB_GIS_ISA1 | SAB_GIS_ISA0)) != 0)
-		needsoft |= sabtty_intr(sc->sc_child[0]);
-
-	/* channel B */
-	if ((gis & (SAB_GIS_ISB1 | SAB_GIS_ISB0)) != 0)
-		needsoft |= sabtty_intr(sc->sc_child[1]);
-
-	if (needsoft)
-		swi_sched(sc->sc_softih, 0);
-}
-
-static void
-sab_softintr(void *v)
-{
-	struct sab_softc *sc = v;
-
-	sabtty_softintr(sc->sc_child[0]);
-	sabtty_softintr(sc->sc_child[1]);
-}
-
-static void
-sab_shutdown(void *v)
-{
-	struct sab_softc *sc = v;
-
-	SAB_WRITE(sc, SAB_IPC, SAB_IPC_ICPL | SAB_IPC_VIS);
-	SAB_WRITE(sc, SAB_RFC, SAB_READ(sc, SAB_RFC) & ~SAB_RFC_RFDF);
-}
-
-static int
-sabtty_probe(device_t dev)
-{
-	char desc[32];
-
-	snprintf(desc, sizeof(desc), "ttyz%d", device_get_unit(dev));
-	device_set_desc_copy(dev, desc);
-	return (0);
-}
-
-static int
-sabtty_attach(device_t dev)
-{
-	struct sabtty_softc *sc;
-	struct tty *tp;
-	char mode[32];
-	int baud;
-	int clen;
-	char parity;
-	int stop;
-	char c;
-
-	sc = device_get_softc(dev);
-	mtx_init(&sc->sc_mtx, "sabtty", NULL, MTX_SPIN);
-	sc->sc_dev = dev;
-	sc->sc_parent = device_get_softc(device_get_parent(dev));
-	sc->sc_bt = sc->sc_parent->sc_bt;
-	sc->sc_channel = device_get_unit(dev) & 1;
-	sc->sc_iput = sc->sc_iget = sc->sc_ibuf;
-	sc->sc_oget = sc->sc_obuf;
-
-	switch (sc->sc_channel) {
-	case 0:	/* port A */
-		sc->sc_pvr_dtr = SAB_PVR_DTR_A;
-		sc->sc_pvr_dsr = SAB_PVR_DSR_A;
-		bus_space_subregion(sc->sc_bt, sc->sc_parent->sc_bh,
-		    SAB_CHAN_A, SAB_CHANLEN, &sc->sc_bh);
-		break;
-	case 1:	/* port B */
-		sc->sc_pvr_dtr = SAB_PVR_DTR_B;
-		sc->sc_pvr_dsr = SAB_PVR_DSR_B;
-		bus_space_subregion(sc->sc_bt, sc->sc_parent->sc_bh,
-		    SAB_CHAN_B, SAB_CHANLEN, &sc->sc_bh);
-		break;
-	default:
-		return (ENXIO);
-	}
-
-	tp = ttyalloc();
-	tp->t_sc = sc;
-	sc->sc_tty = tp;
-
-	tp->t_oproc = sabttystart;
-	tp->t_param = sabttyparam;
-	tp->t_modem = sabttymodem;
-	tp->t_break = sabttybreak;
-	tp->t_stop = sabttystop;
-	tp->t_open = sabttyopen;
-
-	ttycreate(tp, 0, "z%r", device_get_unit(dev));
-
-	if (sabtty_console(dev, mode, sizeof(mode))) {
-		if (sscanf(mode, "%d,%d,%c,%d,%c", &baud, &clen, &parity,
-		    &stop, &c) == 5) {
-			ttyconsolemode(tp, baud);
-			tp->t_cflag = CREAD | CLOCAL;
-
-			switch (clen) {
-			case 5:
-				tp->t_cflag |= CS5;
-				break;
-			case 6:
-				tp->t_cflag |= CS6;
-				break;
-			case 7:
-				tp->t_cflag |= CS7;
-				break;
-			case 8:
-			default:
-				tp->t_cflag |= CS8;
-				break;
-			}
-
-			if (parity == 'e')
-				tp->t_cflag |= PARENB;
-			else if (parity == 'o')
-				tp->t_cflag |= PARENB | PARODD;
-
-			if (stop == 2)
-				tp->t_cflag |= CSTOPB;
-		}
-		device_printf(dev, "console %s\n", mode);
-		sc->sc_console = 1;
-		sabtty_cons = sc;
-	}
-
-	return (0);
-}
-
-static int
-sabtty_detach(device_t dev)
-{
-
-	return (bus_generic_detach(dev));
-}
-
-static int
-sabtty_intr(struct sabtty_softc *sc)
-{
-	int clearfifo;
-	int needsoft;
-	uint8_t isr0;
-	uint8_t isr1;
-	uint8_t c;
-	int brk;
-	int len;
-	int i;
-
-	brk = 0;
-	len = 0;
-	clearfifo = 0;
-	needsoft = 0;
-
-	SABTTY_LOCK(sc);
-
-	isr0 = SAB_READ(sc, SAB_ISR0);
-	isr1 = SAB_READ(sc, SAB_ISR1);
-
-	if (isr0 & SAB_ISR0_RPF) {
-		len = 32;
-		clearfifo = 1;
-	}
-	if (isr0 & SAB_ISR0_TCD) {
-		len = (32 - 1) & SAB_READ(sc, SAB_RBCL);
-		clearfifo = 1;
-	}
-	if (isr0 & SAB_ISR0_TIME) {
-		sabtty_cec_wait(sc);
-		SAB_WRITE(sc, SAB_CMDR, SAB_CMDR_RFRD);
-	}
-	if (isr0 & SAB_ISR0_RFO)
-		clearfifo = 1;
-	if (len != 0) {
-		for (i = 0; i < len; i++) {
-			c = SAB_READ(sc, SAB_RFIFO);
-#if defined(KDB) && defined(ALT_BREAK_TO_DEBUGGER)
-			if (sc->sc_console != 0 && (i & 1) == 0)
-				brk = kdb_alt_break(c,
-				    &sc->sc_alt_break_state);
-#endif
-			*sc->sc_iput++ = c;
-			if (sc->sc_iput == sc->sc_ibuf + sizeof(sc->sc_ibuf))
-				sc->sc_iput = sc->sc_ibuf;
-		}
-		needsoft = 1;
-	}
-
-	if (clearfifo) {
-		sabtty_cec_wait(sc);
-		SAB_WRITE(sc, SAB_CMDR, SAB_CMDR_RMC);
-	}
-
-	if (isr1 & SAB_ISR1_ALLS) {
-		sc->sc_tx_done = 1;
-		sc->sc_imr1 |= SAB_IMR1_ALLS;
-		SAB_WRITE(sc, SAB_IMR1, sc->sc_imr1);
-		needsoft = 1;
-	}
-
-#if defined(DDB) && defined(BREAK_TO_DEBUGGER)
-	if (sc->sc_console != 0 && (isr1 & SAB_ISR1_BRK) != 0) {
-		brk = 1;
-	}
-#endif
-
-	if (isr1 & SAB_ISR1_XPR) {
-		if (sc->sc_ocnt > 0) {
-			len = min(sc->sc_ocnt, 32);
-			for (i = 0; i < len; i++)
-				SAB_WRITE(sc, SAB_XFIFO + i, *sc->sc_oget++);
-			sc->sc_ocnt -= len;
-			sabtty_cec_wait(sc);
-			SAB_WRITE(sc, SAB_CMDR, SAB_CMDR_XF);
-		}
-		if (sc->sc_ocnt == 0) {
-			sc->sc_imr1 |= SAB_IMR1_XPR;
-			sc->sc_imr1 &= ~SAB_IMR1_ALLS;
-			SAB_WRITE(sc, SAB_IMR1, sc->sc_imr1);
-		}
-	}
-
-	SABTTY_UNLOCK(sc);
-
-	if (brk != 0)
-		breakpoint();
-
-	return (needsoft);
-}
-
-static void
-sabtty_softintr(struct sabtty_softc *sc)
-{
-	struct tty *tp = sc->sc_tty;
-	int data;
-	int stat;
-
-	if ((tp->t_state & TS_ISOPEN) == 0)
-		return;
-
-	while (sc->sc_iget != sc->sc_iput) {
-		data = *sc->sc_iget++;
-		stat = *sc->sc_iget++;
-		if (stat & SAB_RSTAT_PE)
-			data |= TTY_PE;
-		if (stat & SAB_RSTAT_FE)
-			data |= TTY_FE;
-		if (sc->sc_iget == sc->sc_ibuf + sizeof(sc->sc_ibuf))
-			sc->sc_iget = sc->sc_ibuf;
-
-		ttyld_rint(tp, data);
-	}
-
-	if (sc->sc_tx_done != 0) {
-		sc->sc_tx_done = 0;
-		tp->t_state &= ~TS_BUSY;
-		ttyld_start(tp);
-	}
-}
-
-static int
-sabttyopen(struct tty *tp, struct cdev *dev __unused)
-{
-	struct sabtty_softc *sc;
-
-	sc = tp->t_sc;
-
-	sc->sc_iput = sc->sc_iget = sc->sc_ibuf;
-
-	SABTTY_LOCK(sc);
-
-	sabtty_reset(sc);
-	sc->sc_parent->sc_ipc = SAB_IPC_ICPL;
-	SAB_WRITE(sc->sc_parent, SAB_IPC, sc->sc_parent->sc_ipc);
-	sc->sc_imr0 = SAB_IMR0_PERR | SAB_IMR0_FERR | SAB_IMR0_PLLA;
-	SAB_WRITE(sc, SAB_IMR0, sc->sc_imr0);
-#if defined(DDB) && defined(BREAK_TO_DEBUGGER)
-	sc->sc_imr1 = SAB_IMR1_ALLS | SAB_IMR1_XDU |
-	    SAB_IMR1_TIN | SAB_IMR1_CSC | SAB_IMR1_XMR | SAB_IMR1_XPR;
-#else
-	sc->sc_imr1 = SAB_IMR1_BRK | SAB_IMR1_ALLS | SAB_IMR1_XDU |
-	    SAB_IMR1_TIN | SAB_IMR1_CSC | SAB_IMR1_XMR | SAB_IMR1_XPR;
-#endif
-	SAB_WRITE(sc, SAB_IMR1, sc->sc_imr1);
-	SAB_WRITE(sc, SAB_CCR0, SAB_READ(sc, SAB_CCR0) | SAB_CCR0_PU);
-	sabtty_cec_wait(sc);
-	SAB_WRITE(sc, SAB_CMDR, SAB_CMDR_XRES);
-	sabtty_cec_wait(sc);
-	SAB_WRITE(sc, SAB_CMDR, SAB_CMDR_RRES);
-	sabtty_cec_wait(sc);
-
-	sabtty_flush(sc);
-
-	SABTTY_UNLOCK(sc);
-	return (0);
-}
-
-static void
-sabttybreak(struct tty *tp, int brk)
-{
-	struct sabtty_softc *sc;
-
-	sc = tp->t_sc;
-	if (brk)
-		SAB_WRITE(sc, SAB_DAFO,
-		    SAB_READ(sc, SAB_DAFO) | SAB_DAFO_XBRK);
-	else
-		SAB_WRITE(sc, SAB_DAFO,
-		    SAB_READ(sc, SAB_DAFO) & ~SAB_DAFO_XBRK);
-}
-
-static void
-sabttystart(struct tty *tp)
-{
-	struct sabtty_softc *sc;
-
-	sc = tp->t_sc;
-
-	if ((tp->t_state & TS_TBLOCK) != 0)
-		/* XXX clear RTS */;
-	else
-		/* XXX set RTS */;
-
-	if ((tp->t_state & (TS_BUSY | TS_TIMEOUT | TS_TTSTOP)) != 0) {
-		ttwwakeup(tp);
-		return;
-	}
-
-	if (tp->t_outq.c_cc <= tp->t_olowat) {
-		if ((tp->t_state & TS_SO_OLOWAT) != 0) {
-			tp->t_state &= ~TS_SO_OLOWAT;
-			wakeup(TSA_OLOWAT(tp));
-		}
-		selwakeuppri(&tp->t_wsel, TTOPRI);
-		if (tp->t_outq.c_cc == 0) {
-			if ((tp->t_state & (TS_BUSY | TS_SO_OCOMPLETE)) ==
-			    TS_SO_OCOMPLETE && tp->t_outq.c_cc == 0) {
-				tp->t_state &= ~TS_SO_OCOMPLETE;
-				wakeup(TSA_OCOMPLETE(tp));
-			}
-			return;
-		}
-	}
-
-	sc->sc_ocnt = q_to_b(&tp->t_outq, sc->sc_obuf, sizeof(sc->sc_obuf));
-	if (sc->sc_ocnt == 0)
-		return;
-	sc->sc_oget = sc->sc_obuf;
-
-	tp->t_state |= TS_BUSY;
-
-	sc->sc_imr1 &= ~SAB_IMR1_XPR;
-	SAB_WRITE(sc, SAB_IMR1, sc->sc_imr1);
-
-	ttwwakeup(tp);
-}
-
-static void
-sabttystop(struct tty *tp, int flag)
-{
-	struct sabtty_softc *sc;
-
-	sc = tp->t_sc;
-
-	if ((flag & FREAD) != 0) {
-		/* XXX stop reading, anything to do? */;
-	}
-
-	if ((flag & FWRITE) != 0) {
-		if ((tp->t_state & TS_BUSY) != 0) {
-			/* XXX do what? */
-			if ((tp->t_state & TS_TTSTOP) == 0)
-				tp->t_state |= TS_FLUSH;
-		}
-	}
-}
-
-static int
-sabttyparam(struct tty *tp, struct termios *t)
-{
-	struct sabtty_softc *sc;
-
-	sc = tp->t_sc;
-	return (sabtty_param(sc, tp, t));
-}
-
-int
-sabttymodem(struct tty *tp, int biton, int bitoff)
-{
-	struct sabtty_softc *sc;
-	u_int8_t r;
-
-	sc = tp->t_sc;
-	if (biton == 0 && bitoff == 0) {
-		if (SAB_READ(sc, SAB_STAR) & SAB_STAR_CTS)
-			biton |= TIOCM_CTS;
-		if ((SAB_READ(sc, SAB_VSTR) & SAB_VSTR_CD) == 0)
-			biton |= TIOCM_CD;
-
-		r = SAB_READ(sc, SAB_PVR);
-		if ((r & sc->sc_pvr_dtr) == 0)
-			biton |= TIOCM_DTR;
-		if ((r & sc->sc_pvr_dsr) == 0)
-			biton |= TIOCM_DSR;
-
-		r = SAB_READ(sc, SAB_MODE);
-		if ((r & (SAB_MODE_RTS|SAB_MODE_FRTS)) == SAB_MODE_RTS)
-			biton |= TIOCM_RTS;
-		return (biton);
-	}
-	bitoff |= biton;
-	if (bitoff & SER_RTS) {
-		r = SAB_READ(sc, SAB_MODE);
-		r &= ~SAB_MODE_FRTS;
-		if (biton & SER_RTS)
-			r |= SAB_MODE_RTS;
-		SAB_WRITE(sc, SAB_MODE, r);
-	}
-	if (bitoff & SER_DTR) {
-		r = SAB_READ(sc, SAB_PVR);
-		r &= ~sc->sc_pvr_dtr;
-		if (biton & SER_DTR)
-			r |= sc->sc_pvr_dtr;
-		SAB_WRITE(sc, SAB_PVR, r);
-	}
-	return (0);
-}
-
-int
-sabtty_param(struct sabtty_softc *sc, struct tty *tp, struct termios *t)
-{
-	int ospeed;
-	tcflag_t cflag;
-	u_int8_t dafo, r;
-
-	ospeed = sabtty_speed(t->c_ospeed);
-	if (ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed))
-		return (EINVAL);
-
-	/*
-	 * If there were no changes, don't do anything.  This avoids dropping
-	 * input and improves performance when all we did was frob things like
-	 * VMIN and VTIME.
-	 */
-	if (tp->t_ospeed == t->c_ospeed &&
-	    tp->t_cflag == t->c_cflag)
-		return (0);
-
-	/* hang up line if ospeed is zero, otherwise raise dtr */
-	if (t->c_ospeed != 0)
-		sabttymodem(tp, SER_DTR, 0);
-	else
-		sabttymodem(tp, 0, SER_DTR);
-
-	dafo = SAB_READ(sc, SAB_DAFO);
-
-	cflag = t->c_cflag;
-
-	if (sc->sc_console != 0) {
-		cflag |= CLOCAL;
-		cflag &= ~HUPCL;
-	}
-
-	if (cflag & CSTOPB)
-		dafo |= SAB_DAFO_STOP;
-	else
-		dafo &= ~SAB_DAFO_STOP;
-
-	dafo &= ~SAB_DAFO_CHL_CSIZE;
-	switch (cflag & CSIZE) {
-	case CS5:
-		dafo |= SAB_DAFO_CHL_CS5;
-		break;
-	case CS6:
-		dafo |= SAB_DAFO_CHL_CS6;
-		break;
-	case CS7:
-		dafo |= SAB_DAFO_CHL_CS7;
-		break;
-	default:
-		dafo |= SAB_DAFO_CHL_CS8;
-		break;
-	}
-
-	dafo &= ~SAB_DAFO_PARMASK;
-	if (cflag & PARENB) {
-		if (cflag & PARODD)
-			dafo |= SAB_DAFO_PAR_ODD;
-		else
-			dafo |= SAB_DAFO_PAR_EVEN;
-	} else
-		dafo |= SAB_DAFO_PAR_NONE;
-
-	tp->t_ispeed = 0;
-	tp->t_ospeed = t->c_ospeed;
-	tp->t_cflag = cflag;
-
-	ttsetwater(tp);
-
-	SABTTY_LOCK(sc);
-
-	if (ospeed != 0) {
-		SAB_WRITE(sc, SAB_BGR, ospeed & 0xff);
-		r = SAB_READ(sc, SAB_CCR2);
-		r &= ~(SAB_CCR2_BR9 | SAB_CCR2_BR8);
-		r |= (ospeed >> 2) & (SAB_CCR2_BR9 | SAB_CCR2_BR8);
-		SAB_WRITE(sc, SAB_CCR2, r);
-	}
-
-	r = SAB_READ(sc, SAB_MODE);
-	r |= SAB_MODE_RAC;
-	if (cflag & CRTSCTS) {
-		r &= ~(SAB_MODE_RTS | SAB_MODE_FCTS);
-		r |= SAB_MODE_FRTS;
-		sc->sc_imr1 &= ~SAB_IMR1_CSC;
-	} else {
-		r |= SAB_MODE_RTS | SAB_MODE_FCTS;
-		r &= ~SAB_MODE_FRTS;
-		sc->sc_imr1 |= SAB_IMR1_CSC;
-	}
-	SAB_WRITE(sc, SAB_MODE, r);
-	SAB_WRITE(sc, SAB_IMR1, sc->sc_imr1);
-
-	SABTTY_UNLOCK(sc);
-
-	return (0);
-}
-
-static void
-sabtty_cec_wait(struct sabtty_softc *sc)
-{
-	int i = 50000;
-
-	for (;;) {
-		if ((SAB_READ(sc, SAB_STAR) & SAB_STAR_CEC) == 0)
-			return;
-		if (--i == 0)
-			break;
-		DELAY(1);
-	}
-}
-
-static void
-sabtty_tec_wait(struct sabtty_softc *sc)
-{
-	int i = 200000;
-
-	for (;;) {
-		if ((SAB_READ(sc, SAB_STAR) & SAB_STAR_TEC) == 0)
-			return;
-		if (--i == 0)
-			break;
-		DELAY(1);
-	}
-}
-
-static void
-sabtty_reset(struct sabtty_softc *sc)
-{
-	/* power down */
-	SAB_WRITE(sc, SAB_CCR0, 0);
-
-	/* set basic configuration */
-	SAB_WRITE(sc, SAB_CCR0,
-	    SAB_CCR0_MCE | SAB_CCR0_SC_NRZ | SAB_CCR0_SM_ASYNC);
-	SAB_WRITE(sc, SAB_CCR1, SAB_CCR1_ODS | SAB_CCR1_BCR | SAB_CCR1_CM_7);
-	SAB_WRITE(sc, SAB_CCR2, SAB_CCR2_BDF | SAB_CCR2_SSEL | SAB_CCR2_TOE);
-	SAB_WRITE(sc, SAB_CCR3, 0);
-	SAB_WRITE(sc, SAB_CCR4, SAB_CCR4_MCK4 | SAB_CCR4_EBRG);
-	SAB_WRITE(sc, SAB_MODE, SAB_MODE_RTS | SAB_MODE_FCTS | SAB_MODE_RAC);
-	SAB_WRITE(sc, SAB_RFC,
-	    SAB_RFC_DPS | SAB_RFC_RFDF | SAB_RFC_RFTH_32CHAR);
-
-	/* clear interrupts */
-	sc->sc_imr0 = sc->sc_imr1 = 0xff;
-	SAB_WRITE(sc, SAB_IMR0, sc->sc_imr0);
-	SAB_WRITE(sc, SAB_IMR1, sc->sc_imr1);
-	SAB_READ(sc, SAB_ISR0);
-	SAB_READ(sc, SAB_ISR1);
-}
-
-static void
-sabtty_flush(struct sabtty_softc *sc)
-{
-
-	/* clear rx fifo */
-	sabtty_cec_wait(sc);
-	SAB_WRITE(sc, SAB_CMDR, SAB_CMDR_RRES);
-
-	/* clear tx fifo */
-	sabtty_cec_wait(sc);
-	SAB_WRITE(sc, SAB_CMDR, SAB_CMDR_XRES);
-}
-
-static int
-sabtty_speed(int rate)
-{
-	int i, len, r;
-
-	if (rate == 0)
-		return (0);
-	len = sizeof(sabtty_baudtable)/sizeof(sabtty_baudtable[0]);
-	for (i = 0; i < len; i++) {
-		if (rate == sabtty_baudtable[i].baud) {
-			r = sabtty_baudtable[i].n |
-			    (sabtty_baudtable[i].m << 6);
-			return (r);
-		}
-	}
-	return (-1);
-}
-
-static void
-sab_cnprobe(struct consdev *cn)
-{
-	struct sabtty_softc *sc = sabtty_cons;
-
-	if (sc == NULL)
-		cn->cn_pri = CN_DEAD;
-	else {
-		cn->cn_pri = CN_REMOTE;
-		strcpy(cn->cn_name, device_get_desc(sc->sc_dev));
-		cn->cn_tp = sc->sc_tty;
-	}
-}
-
-static void
-sab_cninit(struct consdev *cn)
-{
-}
-
-static void
-sab_cnterm(struct consdev *cn)
-{
-}
-
-static int
-sab_cngetc(struct consdev *cn)
-{
-	struct sabtty_softc *sc = sabtty_cons;
-
-	if (sc == NULL)
-		return (-1);
-	return (sabtty_cngetc(sc));
-}
-
-static int
-sab_cncheckc(struct consdev *cn)
-{
-	struct sabtty_softc *sc = sabtty_cons;
-
-	if (sc == NULL)
-		return (-1);
-	return (sabtty_cncheckc(sc));
-}
-
-static void
-sab_cnputc(struct consdev *cn, int c)
-{
-	struct sabtty_softc *sc = sabtty_cons;
-
-	if (sc == NULL)
-		return;
-	sabtty_cnputc(sc, c);
-}
-
-static void
-sab_cndbctl(struct consdev *cn, int c)
-{
-}
-
-static void
-sabtty_cnopen(struct sabtty_softc *sc)
-{
-
-	SAB_WRITE(sc, SAB_IMR0, 0xff);
-	SAB_WRITE(sc, SAB_IMR1, 0xff);
-	SAB_WRITE(sc->sc_parent, SAB_IPC, sc->sc_parent->sc_ipc | SAB_IPC_VIS);
-}
-
-static void
-sabtty_cnclose(struct sabtty_softc *sc)
-{
-
-	SAB_WRITE(sc, SAB_IMR0, sc->sc_imr0);
-	SAB_WRITE(sc, SAB_IMR1, sc->sc_imr1);
-	SAB_WRITE(sc->sc_parent, SAB_IPC, sc->sc_parent->sc_ipc);
-}
-
-static int
-sabtty_cngetc(struct sabtty_softc *sc)
-{
-	uint8_t len;
-	uint8_t r;
-
-	sabtty_cnopen(sc);
-again:
-	do {
-		r = SAB_READ(sc, SAB_STAR);
-	} while ((r & SAB_STAR_RFNE) == 0);
-
-	/*
-	 * Ok, at least one byte in RFIFO, ask for permission to access RFIFO
-	 * (I hate this chip... hate hate hate).
-	 */
-	sabtty_cec_wait(sc);
-	SAB_WRITE(sc, SAB_CMDR, SAB_CMDR_RFRD);
-
-	/* Wait for RFIFO to come ready */
-	do {
-		r = SAB_READ(sc, SAB_ISR0);
-	} while ((r & SAB_ISR0_TCD) == 0);
-
-	len = SAB_READ(sc, SAB_RBCL) & (32 - 1);
-	if (len == 0)
-		goto again;	/* Shouldn't happen... */
-
-	r = SAB_READ(sc, SAB_RFIFO);
-
-	/*
-	 * Blow away everything left in the FIFO...
-	 */
-	sabtty_cec_wait(sc);
-	SAB_WRITE(sc, SAB_CMDR, SAB_CMDR_RMC);
-	sabtty_cnclose(sc);
-	return (r);
-}
-
-static int
-sabtty_cncheckc(struct sabtty_softc *sc)
-{
-	int8_t r;
-
-	r = -1;
-	sabtty_cnopen(sc);
-	if ((SAB_READ(sc, SAB_STAR) & SAB_STAR_RFNE) != 0)
-		r = sabtty_cngetc(sc);
-	sabtty_cnclose(sc);
-	return (r);
-}
-
-static void
-sabtty_cnputc(struct sabtty_softc *sc, int c)
-{
-
-	sabtty_cnopen(sc);
-	sabtty_tec_wait(sc);
-	SAB_WRITE(sc, SAB_TIC, c);
-	sabtty_tec_wait(sc);
-	sabtty_cnclose(sc);
-}
-
-static int
-sabtty_console(device_t dev, char *mode, int len)
-{
-	phandle_t chosen;
-	phandle_t options;
-	phandle_t parent;
-	ihandle_t stdin;
-	ihandle_t stdout;
-	char output[32];
-	char input[32];
-	char name[32];
-	int unit;
-
-	chosen = OF_finddevice("/chosen");
-	options = OF_finddevice("/options");
-	parent = ofw_bus_get_node(device_get_parent(dev));
-	if (OF_getprop(chosen, "stdin", &stdin, sizeof(stdin)) == -1 ||
-	    OF_getprop(chosen, "stdout", &stdout, sizeof(stdout)) == -1 ||
-	    OF_getprop(options, "input-device", input, sizeof(input)) == -1 ||
-	    OF_getprop(options, "output-device", output, sizeof(output)) == -1)
-		return (0);
-	if (parent != OF_instance_to_package(stdin) ||
-	    parent != OF_instance_to_package(stdout))
-		return (0);
-	unit = device_get_unit(dev);
-	switch (unit) {
-	case 0:		strcpy(name, "ttya"); break;
-	case 1:		strcpy(name, "ttyb"); break;
-	default:	strcpy(name, "ttysomething"); break;
-	}
-	if ((strcmp(input, name) == 0 && strcmp(output, name) == 0) ||
-	    (strcmp(input, "keyboard") == 0 && strcmp(output, "screen") == 0 &&
-	     (unit & 1) == 0)) {
-		if (mode != NULL) {
-			strcat(name, "-mode");
-			return (OF_getprop(options, name, mode, len) != -1);
-		} else
-			return (1);
-	}
-	return (0);
-}
diff --git a/sys/dev/sab/sab82532reg.h b/sys/dev/sab/sab82532reg.h
deleted file mode 100644
index 77e48216357f0..0000000000000
--- a/sys/dev/sab/sab82532reg.h
+++ /dev/null
@@ -1,320 +0,0 @@
-/*	$OpenBSD: sab82532reg.h,v 1.2 2002/04/08 17:49:42 jason Exp $	*/
-
-/*-
- * Copyright (c) 2001 Jason L. Wright (jason@thought.net)
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by Jason L. Wright
- * 4. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * Effort sponsored in part by the Defense Advanced Research Projects
- * Agency (DARPA) and Air Force Research Laboratory, Air Force
- * Materiel Command, USAF, under agreement number F30602-01-2-0537.
- *
- * $FreeBSD$
- */
-
-/*
- * Register definitions for SAB82532 based on "Enhanced Serial Communication
- * Controller ESCC2 Version 3.2 User's Manual 07.96" from:
- * http://www.infineon.com
- */
-
-#define	SAB_NCHAN	2	/* number of channels */
-#define	SAB_CHANLEN	0x40	/* length of channel register set */
-
-#define	SAB_CHAN_A	0x00	/* channel A register offset */
-#define	SAB_CHAN_B	0x40	/* channel B register offset */
-
-#define	SAB_RFIFO	0x00	/* r: rx fifo */
-#define	SAB_XFIFO	0x00	/* w: tx fifo */
-#define	SAB_STAR	0x20	/* r: status register */
-#define	SAB_CMDR	0x20	/* w: command register */
-#define	SAB_MODE	0x22	/* rw: mode register */
-#define	SAB_TIMR	0x23	/* rw: timer register */
-#define	SAB_XON		0x24	/* rw: xon character */
-#define	SAB_XOFF	0x25	/* rw: xoff character */
-#define	SAB_TCR		0x26	/* rw: termination character */
-#define	SAB_DAFO	0x27	/* rw: data format */
-#define	SAB_RFC		0x28	/* rw: rfifo control register */
-#define	SAB_RBCL	0x2a	/* r: rx byte count low */
-#define	SAB_TBCL	0x2a	/* w: tx byte count low */
-#define	SAB_RBCH	0x2b	/* r: rx byte count high */
-#define	SAB_XBCH	0x2b	/* w: tx byte count high */
-#define	SAB_CCR0	0x2c	/* rw: channel configuration register 0 */
-#define	SAB_CCR1	0x2d	/* rw: channel configuration register 1 */
-#define	SAB_CCR2	0x2e	/* rw: channel configuration register 2 */
-#define	SAB_CCR3	0x2f	/* rw: channel configuration register 3 */
-#define	SAB_TSAX	0x30	/* w: time-slot assignment register tx */
-#define	SAB_TSAR	0x31	/* w: time-slot assignment register rx */
-#define	SAB_XCCR	0x32	/* w: tx channel capacity register */
-#define	SAB_RCCR	0x33	/* w: receive channel capacity register */
-#define	SAB_VSTR	0x34	/* r: version status */
-#define	SAB_BGR		0x34	/* w: baud rate generator */
-#define	SAB_TIC		0x35	/* w: transmit immediate character */
-#define	SAB_MXN		0x36	/* w: mask xon character */
-#define	SAB_MXF		0x37	/* w: mask xoff character */
-#define	SAB_GIS		0x38	/* r: global interrupt status */
-#define	SAB_IVA		0x38	/* w: interrupt vector address */
-#define	SAB_IPC		0x39	/* rw: interrupt port configuration */
-#define	SAB_ISR0	0x3a	/* r: interrupt status 0 */
-#define	SAB_IMR0	0x3a	/* w: interrupt mask 0 */
-#define	SAB_ISR1	0x3b	/* r: interrupt status 1 */
-#define	SAB_IMR1	0x3b	/* w: interrupt mask 1 */
-#define	SAB_PVR		0x3c	/* rw: port value register */
-#define	SAB_PIS		0x3d	/* r: port interrupt status */
-#define	SAB_PIM		0x3d	/* w: port interrupt mask */
-#define	SAB_PCR		0x3e	/* w: port configuration register */
-#define	SAB_CCR4	0x3f	/* rw: channel configuration register 4 */
-
-/* SAB_STAR: status register */
-#define	SAB_STAR_XDOV	0x80	/* transmit data overflow */
-#define	SAB_STAR_XFW	0x40	/* transmit fifo write enable */
-#define	SAB_STAR_RFNE	0x20	/* rfifo not empty */
-#define	SAB_STAR_FCS	0x10	/* flow control status */
-#define	SAB_STAR_TEC	0x08	/* tx immediate char is executing */
-#define	SAB_STAR_CEC	0x04	/* command is executing */
-#define	SAB_STAR_CTS	0x02	/* cts status: 0:inactive/high,1:active/low */
-
-/* SAB_CMDR: command register */
-#define	SAB_CMDR_RMC	0x80	/* receive message complete */
-#define	SAB_CMDR_RRES	0x40	/* receiver reset */
-#define	SAB_CMDR_RFRD	0x20	/* receive fifo read enable */
-#define	SAB_CMDR_STI	0x10	/* start timer */
-#define	SAB_CMDR_XF	0x08	/* transmit frame */
-#define	SAB_CMDR_XRES	0x01	/* transmit reset */
-
-/* SAB_MODE: mode register */
-#define	SAB_MODE_FRTS	0x40	/* flow control using rts */
-#define	SAB_MODE_FCTS	0x20	/* flow control using cts */
-#define	SAB_MODE_FLON	0x10	/* flow control on */
-#define	SAB_MODE_RAC	0x08	/* receiver active */
-#define	SAB_MODE_RTS	0x04	/* request to send */
-#define	SAB_MODE_TRS	0x02	/* timer resolution */
-#define	SAB_MODE_TLP	0x01	/* test loop */
-
-/* SAB_TIMR: timer register */
-#define	SAB_TIMR_CNT	0xe0	/* count mask */
-#define	SAB_TIMR_VAL	0x1f	/* value mask */
-
-/* SAB_DAFO: data format */
-#define	SAB_DAFO_XBRK	0x40	/* transmit break */
-#define	SAB_DAFO_STOP	0x20	/* stop bit: 0:1 bit, 1:2 bits */
-#define	SAB_DAFO_PAR1	0x10	/* parity 1, see below */
-#define	SAB_DAFO_PAR0	0x08	/* parity 0, see below */
-#define	SAB_DAFO_PARE	0x04	/* parity enable */
-#define	SAB_DAFO_CHL1	0x02	/* character length 1, see below */
-#define	SAB_DAFO_CHL0	0x01	/* character length 0, see below */
-
-#define	SAB_DAFO_CHL_CSIZE	(SAB_DAFO_CHL1|SAB_DAFO_CHL0)
-#define	SAB_DAFO_CHL_CS5	(SAB_DAFO_CHL1|SAB_DAFO_CHL0)
-#define	SAB_DAFO_CHL_CS6	(SAB_DAFO_CHL1)
-#define	SAB_DAFO_CHL_CS7	(SAB_DAFO_CHL0)
-#define	SAB_DAFO_CHL_CS8	(0)
-
-#define	SAB_DAFO_PARMASK	(SAB_DAFO_PAR1|SAB_DAFO_PAR0|SAB_DAFO_PARE)
-#define	SAB_DAFO_PAR_MARK	(SAB_DAFO_PAR1|SAB_DAFO_PAR0|SAB_DAFO_PARE)
-#define	SAB_DAFO_PAR_EVEN	(SAB_DAFO_PAR1|SAB_DAFO_PARE)
-#define	SAB_DAFO_PAR_ODD	(SAB_DAFO_PAR0|SAB_DAFO_PARE)
-#define	SAB_DAFO_PAR_SPACE	(SAB_DAFO_PARE)
-#define	SAB_DAFO_PAR_NONE	(0)
-
-/* SAB_RFC: rfifo control register */
-#define	SAB_RFC_DPS	0x40	/* disable parity storage */
-#define	SAB_RFC_DXS	0x20	/* disable storage of xon/xoff characters */
-#define	SAB_RFC_RFDF	0x10	/* rfifo data format: 0 data,1 data+stat */
-#define	SAB_RFC_RFTH1	0x08	/* rfifo threshold level 1, see below */
-#define	SAB_RFC_RFTH0	0x04	/* rfifo threshold level 0, see below */
-#define	SAB_RFC_TCDE	0x01	/* termination character detection enable */
-
-#define	SAB_RFC_RFTH_MASK	(SAB_RFC_RFTH1|SAB_RFC_RFTH0)
-#define	SAB_RFC_RFTH_32CHAR	(SAB_RFC_RFTH1|SAB_RFC_RFTH0)
-#define	SAB_RFC_RFTH_16CHAR	(SAB_RFC_RFTH1)
-#define	SAB_RFC_RFTH_4CHAR	(SAB_RFC_RFTH0)
-#define	SAB_RFC_RFTH_1CHAR	(0)
-
-/* SAB_RBCH: received byte count high */
-#define	SAB_RBCH_DMA	0x80	/* read back of XBCH DMA bit */
-#define	SAB_RBCH_CAS	0x20	/* read back of XBCH CAS bit */
-#define	SAB_RBCH_CNT	0x0f	/* ms 4 bits of rx byte count (not used) */
-
-/* SAB_XBCH: transmit byte count high */
-#define	SAB_XBCH_DMA	0x80	/* dma mode: 1:dma, 0:interrupt */
-#define	SAB_XBCH_CAS	0x20	/* carrier detect auto-start */
-#define	SAB_XBCH_XC	0x10	/* transmit continuously */
-#define	SAB_XBCH_CNT	0x0f	/* ms 4 bits of tx byte count */
-
-/* SAB_CCR0: channel configuration register 0 */
-#define	SAB_CCR0_PU	0x80	/* 0:power-down, 1:power-up */
-#define	SAB_CCR0_MCE	0x40	/* master clock enable */
-#define	SAB_CCR0_SC2	0x10	/* serial port config 2, see below */
-#define	SAB_CCR0_SC1	0x08	/* serial port config 1, see below */
-#define	SAB_CCR0_SC0	0x04	/* serial port config 0, see below */
-#define	SAB_CCR0_SM1	0x02	/* serial mode 1, see below */
-#define	SAB_CCR0_SM0	0x01	/* serial mode 0, see below */
-
-#define	SAB_CCR0_SC_MASK	(SAB_CCR0_SC2|SAB_CCR0_SC1|SAB_CCR0_SC0)
-#define	SAB_CCR0_SC_NRZ		(0)
-#define	SAB_CCR0_SC_NRZI	(SAB_CCR0_SC1)
-#define	SAB_CCR0_SC_FM0		(SAB_CCR0_SC2)
-#define	SAB_CCR0_SC_FM1		(SAB_CCR0_SC2|SAB_CCR0_SC0)
-#define	SAB_CCR0_SC_MANCHESTER	(SAB_CCR0_SC2|SAB_CCR0_SC1)
-
-#define	SAB_CCR0_SM_MASK	(SAB_CCR0_SM1|SAB_CCR0_SM0)
-#define	SAB_CCR0_SM_DLC		(0)
-#define	SAB_CCR0_SM_DLCLOOP	(SAB_CCR0_SM0)
-#define	SAB_CCR0_SM_BISYNC	(SAB_CCR0_SM1)
-#define	SAB_CCR0_SM_ASYNC	(SAB_CCR0_SM1|SAB_CCR0_SM0)
-
-/* SAB_CCR1: channel configuration register 1 */
-#define	SAB_CCR1_ODS	0x10	/* Output driver select:1:pushpull,0:odrain */
-#define	SAB_CCR1_BCR	0x08	/* bit clock rate: 1:async, 0:isochronous */
-#define	SAB_CCR1_CM2	0x04	/* clock mode 2, see below */
-#define	SAB_CCR1_CM1	0x02	/* clock mode 1, see below */
-#define	SAB_CCR1_CM0	0x01	/* clock mode 0, see below */
-
-#define	SAB_CCR1_CM_MASK	(SAB_CCR1_CM2|SAB_CCR1_CM1|SAB_CCR1_CM0)
-#define	SAB_CCR1_CM_7		(SAB_CCR1_CM2|SAB_CCR1_CM1|SAB_CCR1_CM0)
-
-/* SAB_CCR2: channel configuration register 2, depends on clock mode above */
-/* clock mode 0a, 1, 4, 5 */
-#define	SAB_CCR2_SOC1	0x80	/* special output 1, below */
-#define	SAB_CCR2_SOC0	0x40	/* special output 0, below */
-#define	SAB_CCR2_SOC_MASK	(SAB_CCR2_SOC1|SAB_CCR2_SOC0)
-#define	SAB_CCR2_SOC_RTSHIGH	(SAB_CCR2_SOC1)
-#define	SAB_CCR2_SOC_RTSNORM	(0)
-#define	SAB_CCR2_SOC_RTSRX	(SAB_CCR2_SOC1|SAB_CCR2_SOC0)
-/* clock mode 0b, 2, 3, 6, 7 */
-#define	SAB_CCR2_BR9	0x80	/* baud rate bit 9 */
-#define	SAB_CCR2_BR8	0x40	/* baud rate bit 8 */
-#define	SAB_CCR2_BDF	0x20	/* baud rate division factor: 0:1: 1:BRG */
-#define	SAB_CCR2_SSEL	0x10	/* clock source select */
-/* clock mode 5 */
-#define	SAB_CCR2_XCS0	0x20	/* tx clock shift, bit 0 */
-#define	SAB_CCR2_RCS0	0x10	/* rx clock shift, bit 0 */
-/* clock mode 0b, 2, 3, 4, 5, 6, 7 */
-#define	SAB_CCR2_TOE	0x08	/* tx clock output enable */
-/* clock mode 0a, 0b, 1, 2, 3, 4, 5, 6, 7 */
-#define	SAB_CCR2_RWX	0x04	/* read/write exchange (dma mode only) */
-#define	SAB_CCR2_DIV	0x01	/* data inversion (nrz) */
-
-/* SAB_CCR3: channel configuration register 3 (v2 or greater) */
-#define	SAB_CCR3_PSD	0x01	/* dpll phase shift disable (nrz/nrzi) */
-
-/* SAB_TSAX: time-slot assignment register transmit (clock mode 5 only) */
-#define	SAB_TSAX_TSNX	0xfc	/* time-slot number transmit */
-#define	SAB_TSAX_XCS2	0x02	/* transmit clock shift bit 2 */
-#define	SAB_TSAX_XCS1	0x01	/* transmit clock shift bit 1 */
-
-/* SAB_TSAR: time-slot assignment register receive (clock mode 5 only) */
-#define	SAB_TSAR_TSNR	0xfc	/* time-slot number receive */
-#define	SAB_TSAR_RCS2	0x02	/* receive clock shift bit 2 */
-#define	SAB_TSAR_RCS1	0x01	/* receive clock shift bit 1 */
-
-/* SAB_VSTR: version status register */
-#define	SAB_VSTR_CD	0x80	/* carrier detect status */
-#define	SAB_VSTR_DPLA	0x40	/* dpll asynchronous */
-#define	SAB_VSTR_VMASK	0x0f	/* chip version mask: */
-#define	SAB_VSTR_V_1	0x00	/*   version 1 */
-#define	SAB_VSTR_V_2	0x01	/*   version 2 */
-#define	SAB_VSTR_V_32	0x02	/*   version 3.2 */
-
-/* SAB_GIS: global interrupt status register */
-#define	SAB_GIS_PI	0x80	/* universal port interrupt */
-#define	SAB_GIS_ISA1	0x08	/* interrupt status a1 */
-#define	SAB_GIS_ISA0	0x04	/* interrupt status a0 */
-#define	SAB_GIS_ISB1	0x02	/* interrupt status b1 */
-#define	SAB_GIS_ISB0	0x01	/* interrupt status b0 */
-
-/* SAB_IVA: interrupt vector address */
-#define	SAB_IVA_MASK	0xf8	/* interrupt vector address mask */
-
-/* SAB_IPC: interrupt port configuration */
-#define	SAB_IPC_VIS	0x80	/* masked interrupt bits visible */
-#define	SAB_IPC_SLAMASK	0x18	/* slave address mask */
-#define	SAB_IPC_CASM	0x04	/* cascading mode */
-#define	SAB_IPC_ICMASK	0x03	/* port config mask: */
-#define	SAB_IPC_ICOD	0x00	/*   open drain output */
-#define	SAB_IPC_ICPL	0x01	/*   push/pull active low output */
-#define	SAB_IPC_ICPH	0x03	/*   push/pull active high output */
-
-/* SAB_ISR0: interrupt status 0 */
-#define	SAB_ISR0_TCD	0x80	/* termination character detected */
-#define	SAB_ISR0_TIME	0x40	/* time-out limit exceeded */
-#define	SAB_ISR0_PERR	0x20	/* parity error */
-#define	SAB_ISR0_FERR	0x10	/* framing error */
-#define	SAB_ISR0_PLLA	0x08	/* dpll asynchronous */
-#define	SAB_ISR0_CDSC	0x04	/* carrier detect status change */
-#define	SAB_ISR0_RFO	0x02	/* rfifo overflow */
-#define	SAB_ISR0_RPF	0x01	/* receive pool full */
-
-/* SAB_ISR1: interrupt status 1 */
-#define	SAB_ISR1_BRK	0x80	/* break detected */
-#define	SAB_ISR1_BRKT	0x40	/* break terminated */
-#define	SAB_ISR1_ALLS	0x20	/* all sent */
-#define	SAB_ISR1_XOFF	0x10	/* xoff detected */
-#define	SAB_ISR1_TIN	0x08	/* timer interrupt */
-#define	SAB_ISR1_CSC	0x04	/* clear to send status change */
-#define	SAB_ISR1_XON	0x02	/* xon detected */
-#define	SAB_ISR1_XPR	0x01	/* transmit pool ready */
-
-/* SAB_IMR0: interrupt mask 0 */
-#define	SAB_IMR0_TCD	0x80	/* termination character detected */
-#define	SAB_IMR0_TIME	0x40	/* time-out limit exceeded */
-#define	SAB_IMR0_PERR	0x20	/* parity error */
-#define	SAB_IMR0_FERR	0x10	/* framing error */
-#define	SAB_IMR0_PLLA	0x08	/* dpll asynchronous */
-#define	SAB_IMR0_CDSC	0x04	/* carrier detect status change */
-#define	SAB_IMR0_RFO	0x02	/* rfifo overflow */
-#define	SAB_IMR0_RPF	0x01	/* receive pool full */
-
-/* SAB_ISR1: interrupt mask 1 */
-#define	SAB_IMR1_BRK	0x80	/* break detected */
-#define	SAB_IMR1_BRKT	0x40	/* break terminated */
-#define	SAB_IMR1_ALLS	0x20	/* all sent */
-#define	SAB_IMR1_XDU	0x10	/* xoff detected */
-#define	SAB_IMR1_TIN	0x08	/* timer interrupt */
-#define	SAB_IMR1_CSC	0x04	/* clear to send status change */
-#define	SAB_IMR1_XMR	0x02	/* xon detected */
-#define	SAB_IMR1_XPR	0x01	/* transmit pool ready */
-
-/* SAB_PVR: port value register */
-#define	SAB_PVR_DSR_A	0x01	/* port A DSR */
-#define	SAB_PVR_DTR_A	0x02	/* port A DTR */
-#define	SAB_PVR_DTR_B	0x04	/* port B DTR */
-#define	SAB_PVR_DSR_B	0x08	/* port B DSR */
-#define	SAB_PVR_MAGIC	0x10	/* dunno... */
-
-/* SAB_CCR4: channel configuration register 4 */
-#define	SAB_CCR4_MCK4	0x80	/* master clock divide by 4 */
-#define	SAB_CCR4_EBRG	0x40	/* enhanced baud rate generator mode */
-#define	SAB_CCR4_TST1	0x20	/* test pin */
-#define	SAB_CCR4_ICD	0x10	/* invert polarity of carrier detect */
-
-/* Receive status byte */
-#define	SAB_RSTAT_PE	0x80	/* parity error */
-#define	SAB_RSTAT_FE	0x40	/* framing error */
-#define	SAB_RSTAT_PAR	0x01	/* parity bit */