1 files changed, 0 insertions, 171 deletions
diff --git a/src/arm/kirkwood-laplug.dts b/src/arm/kirkwood-laplug.dts
deleted file mode 100644
index 24425660e973c..0000000000000
--- a/src/arm/kirkwood-laplug.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-
-/ {
-	model = "LaCie LaPlug";
-	compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>; /* 128 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			eeprom@50 {
-				compatible = "atmel,24c04";
-				pagesize = <16>;
-				reg = <0x50>;
-			};
-		};
-
-		pinctrl: pin-controller@10000 {
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp14";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button@1{
-			label = "Power push button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-fail {
-			label = "laplug_v2:red:power";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		blue-power {
-			label = "laplug_v2:blue:power";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power_back1: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power Back 1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb_power_back2: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "USB Power Back 2";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb_power_front: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "USB Power Front";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	/* Total size : 512MB */
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0 0x100000>; /* 1MB */
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x100000 0x1000000>; /* 16MB */
-	};
-
-	partition@1100000 {
-		label = "rootfs";
-		reg = <0x1100000 0x1EF00000>; /* 495MB */
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};