aboutsummaryrefslogtreecommitdiff
path: root/src/arm64/arm
diff options
context:
space:
mode:
Diffstat (limited to 'src/arm64/arm')
-rw-r--r--src/arm64/arm/foundation-v8.dts8
-rw-r--r--src/arm64/arm/juno-base.dtsi213
-rw-r--r--src/arm64/arm/juno-clocks.dtsi6
-rw-r--r--src/arm64/arm/juno-motherboard.dtsi177
-rw-r--r--src/arm64/arm/juno-r1.dts200
-rw-r--r--src/arm64/arm/juno.dts215
-rw-r--r--src/arm64/arm/rtsm_ve-aemv8a.dts8
-rw-r--r--src/arm64/arm/rtsm_ve-motherboard.dtsi2
-rw-r--r--src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts191
-rw-r--r--src/arm64/arm/vexpress-v2m-rs1.dtsi442
10 files changed, 1326 insertions, 136 deletions
diff --git a/src/arm64/arm/foundation-v8.dts b/src/arm64/arm/foundation-v8.dts
index 27f32962e55c6..4eac8dcea423e 100644
--- a/src/arm64/arm/foundation-v8.dts
+++ b/src/arm64/arm/foundation-v8.dts
@@ -34,6 +34,7 @@
reg = <0x0 0x0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@1 {
device_type = "cpu";
@@ -41,6 +42,7 @@
reg = <0x0 0x1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@2 {
device_type = "cpu";
@@ -48,6 +50,7 @@
reg = <0x0 0x2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@3 {
device_type = "cpu";
@@ -55,6 +58,11 @@
reg = <0x0 0x3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
};
};
diff --git a/src/arm64/arm/juno-base.dtsi b/src/arm64/arm/juno-base.dtsi
new file mode 100644
index 0000000000000..dd5158eb58723
--- /dev/null
+++ b/src/arm64/arm/juno-base.dtsi
@@ -0,0 +1,213 @@
+ /*
+ * Devices shared by all Juno boards
+ */
+
+ memtimer: timer@2a810000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x2a810000 0x0 0x10000>;
+ clock-frequency = <50000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+ frame@2a830000 {
+ frame-number = <1>;
+ interrupts = <0 60 4>;
+ reg = <0x0 0x2a830000 0x0 0x10000>;
+ };
+ };
+
+ mailbox: mhu@2b1f0000 {
+ compatible = "arm,mhu", "arm,primecell";
+ reg = <0x0 0x2b1f0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mhu_lpri_rx",
+ "mhu_hpri_rx";
+ #mbox-cells = <1>;
+ clocks = <&soc_refclk100mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ gic: interrupt-controller@2c010000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ reg = <0x0 0x2c010000 0 0x1000>,
+ <0x0 0x2c02f000 0 0x2000>,
+ <0x0 0x2c04f000 0 0x2000>,
+ <0x0 0x2c06f000 0 0x2000>;
+ #address-cells = <2>;
+ #interrupt-cells = <3>;
+ #size-cells = <2>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ ranges = <0 0 0 0x2c1c0000 0 0x40000>;
+ v2m_0: v2m@0 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0 0 0 0x1000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ sram: sram@2e000000 {
+ compatible = "arm,juno-sram-ns", "mmio-sram";
+ reg = <0x0 0x2e000000 0x0 0x8000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x2e000000 0x8000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x0 0x200>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x200 0x200>;
+ };
+ };
+
+ scpi {
+ compatible = "arm,scpi";
+ mboxes = <&mailbox 1>;
+ shmem = <&cpu_scp_hpri>;
+
+ clocks {
+ compatible = "arm,scpi-clocks";
+
+ scpi_dvfs: scpi_clocks@0 {
+ compatible = "arm,scpi-dvfs-clocks";
+ #clock-cells = <1>;
+ clock-indices = <0>, <1>, <2>;
+ clock-output-names = "atlclk", "aplclk","gpuclk";
+ };
+ scpi_clk: scpi_clocks@3 {
+ compatible = "arm,scpi-variable-clocks";
+ #clock-cells = <1>;
+ clock-indices = <3>, <4>;
+ clock-output-names = "pxlclk0", "pxlclk1";
+ };
+ };
+
+ scpi_sensors0: sensors {
+ compatible = "arm,scpi-sensors";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ /include/ "juno-clocks.dtsi"
+
+ dma@7ff00000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0x7ff00000 0 0x1000>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_faxiclk>;
+ clock-names = "apb_pclk";
+ };
+
+ soc_uart0: uart@7ff80000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x7ff80000 0x0 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ i2c@7ffa0000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x7ffa0000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ i2c-sda-hold-time-ns = <500>;
+ clocks = <&soc_smc50mhz>;
+
+ dvi0: dvi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ };
+
+ dvi1: dvi-transmitter@71 {
+ compatible = "nxp,tda998x";
+ reg = <0x71>;
+ };
+ };
+
+ ohci@7ffb0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0x7ffb0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ ehci@7ffc0000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0x7ffc0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ memory-controller@7ffd0000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0 0x7ffd0000 0 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* last 16MB of the first memory area is reserved for secure world use by firmware */
+ reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+ <0x00000008 0x80000000 0x1 0x80000000>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 15>;
+ interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>;
+
+ /include/ "juno-motherboard.dtsi"
+ };
diff --git a/src/arm64/arm/juno-clocks.dtsi b/src/arm64/arm/juno-clocks.dtsi
index ea2b5666a16f5..25352ed943e6e 100644
--- a/src/arm64/arm/juno-clocks.dtsi
+++ b/src/arm64/arm/juno-clocks.dtsi
@@ -8,7 +8,7 @@
*/
/* SoC fixed clocks */
- soc_uartclk: refclk72738khz {
+ soc_uartclk: refclk7273800hz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <7273800>;
@@ -36,9 +36,9 @@
clock-output-names = "apb_pclk";
};
- soc_faxiclk: refclk533mhz {
+ soc_faxiclk: refclk400mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <533000000>;
+ clock-frequency = <400000000>;
clock-output-names = "faxi_clk";
};
diff --git a/src/arm64/arm/juno-motherboard.dtsi b/src/arm64/arm/juno-motherboard.dtsi
index c138b95a83568..413f1b9ebcd45 100644
--- a/src/arm64/arm/juno-motherboard.dtsi
+++ b/src/arm64/arm/juno-motherboard.dtsi
@@ -21,6 +21,20 @@
clock-output-names = "juno_mb:clk25mhz";
};
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "juno_mb:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "juno_mb:refclk32khz";
+ };
+
motherboard {
compatible = "arm,vexpress,v2p-p1", "simple-bus";
#address-cells = <2>; /* SMB chipselect number and offset */
@@ -40,6 +54,70 @@
regulator-always-on;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <116>;
+ label = "POWER";
+ gpios = <&iofpga_gpio0 0 0x4>;
+ };
+ button@2 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <102>;
+ label = "HOME";
+ gpios = <&iofpga_gpio0 1 0x4>;
+ };
+ button@3 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <152>;
+ label = "RLOCK";
+ gpios = <&iofpga_gpio0 2 0x4>;
+ };
+ button@4 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <115>;
+ label = "VOL+";
+ gpios = <&iofpga_gpio0 3 0x4>;
+ };
+ button@5 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <114>;
+ label = "VOL-";
+ gpios = <&iofpga_gpio0 4 0x4>;
+ };
+ button@6 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <99>;
+ label = "NMI";
+ gpios = <&iofpga_gpio0 5 0x4>;
+ };
+ };
+
+ flash@0,00000000 {
+ /* 2 * 32MiB NOR Flash memory mounted on CS0 */
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ linux,part-probe = "afs";
+ reg = <0 0x00000000 0x04000000>;
+ bank-width = <4>;
+ /*
+ * Unfortunately, accessing the flash disturbs
+ * the CPU idle states (suspend) and CPU
+ * hotplug of the platform. For this reason,
+ * flash hardware access is disabled by default.
+ */
+ status = "disabled";
+ };
+
ethernet@2,00000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <2 0x00000000 0x10000>;
@@ -66,6 +144,85 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
+ v2m_sysctl: sysctl@020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+ };
+
+ apbregs@010000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x010000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "vexpress:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@08.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "vexpress:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@08.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "vexpress:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@08.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "vexpress:3";
+ linux,default-trigger = "cpu1";
+ default-state = "off";
+ };
+ led@08.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "vexpress:4";
+ linux,default-trigger = "cpu2";
+ default-state = "off";
+ };
+ led@08.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "vexpress:5";
+ linux,default-trigger = "cpu3";
+ default-state = "off";
+ };
+ led@08.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "vexpress:6";
+ default-state = "off";
+ };
+ led@08.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "vexpress:7";
+ default-state = "off";
+ };
+ };
+
mmci@050000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
@@ -106,16 +263,16 @@
compatible = "arm,sp804", "arm,primecell";
reg = <0x110000 0x10000>;
interrupts = <9>;
- clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
- clock-names = "timclken1", "apb_pclk";
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&mb_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
};
v2m_timer23: timer@120000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x120000 0x10000>;
interrupts = <9>;
- clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
- clock-names = "timclken1", "apb_pclk";
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&mb_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
};
rtc@170000 {
@@ -125,5 +282,17 @@
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
};
+
+ iofpga_gpio0: gpio@1d0000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x1d0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
};
diff --git a/src/arm64/arm/juno-r1.dts b/src/arm64/arm/juno-r1.dts
new file mode 100644
index 0000000000000..8826f834f54f2
--- /dev/null
+++ b/src/arm64/arm/juno-r1.dts
@@ -0,0 +1,200 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "ARM Juno development board (r1)";
+ compatible = "arm,juno-r1", "arm,juno", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&A57_0>;
+ };
+ core1 {
+ cpu = <&A57_1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&A53_0>;
+ };
+ core1 {
+ cpu = <&A53_1>;
+ };
+ core2 {
+ cpu = <&A53_2>;
+ };
+ core3 {
+ cpu = <&A53_3>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "arm,psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <300>;
+ exit-latency-us = <1200>;
+ min-residency-us = <2000>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x1010000>;
+ local-timer-stop;
+ entry-latency-us = <300>;
+ exit-latency-us = <1200>;
+ min-residency-us = <2500>;
+ };
+ };
+
+ A57_0: cpu@0 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ A57_1: cpu@1 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ A53_0: cpu@100 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ A53_1: cpu@101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x101>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ A53_2: cpu@102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x102>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ A53_3: cpu@103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x103>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ A57_L2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ A53_L2: l2-cache1 {
+ compatible = "cache";
+ };
+ };
+
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A57_0>,
+ <&A57_1>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A53_0>,
+ <&A53_1>,
+ <&A53_2>,
+ <&A53_3>;
+ };
+
+ #include "juno-base.dtsi"
+
+ pcie-controller@40000000 {
+ compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
+ device_type = "pci";
+ reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */
+ bus-range = <0 255>;
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>,
+ <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
+ <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>,
+ <0 0 0 2 &gic 0 0 0 137 4>,
+ <0 0 0 3 &gic 0 0 0 138 4>,
+ <0 0 0 4 &gic 0 0 0 139 4>;
+ msi-parent = <&v2m_0>;
+ };
+};
+
+&memtimer {
+ status = "okay";
+};
diff --git a/src/arm64/arm/juno.dts b/src/arm64/arm/juno.dts
index d429129ecb3d0..dcfcf15a17f5f 100644
--- a/src/arm64/arm/juno.dts
+++ b/src/arm64/arm/juno.dts
@@ -34,11 +34,62 @@
#address-cells = <2>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&A57_0>;
+ };
+ core1 {
+ cpu = <&A57_1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&A53_0>;
+ };
+ core1 {
+ cpu = <&A53_1>;
+ };
+ core2 {
+ cpu = <&A53_2>;
+ };
+ core3 {
+ cpu = <&A53_3>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "arm,psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <300>;
+ exit-latency-us = <1200>;
+ min-residency-us = <2000>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x1010000>;
+ local-timer-stop;
+ entry-latency-us = <300>;
+ exit-latency-us = <1200>;
+ min-residency-us = <2500>;
+ };
+ };
+
A57_0: cpu@0 {
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
A57_1: cpu@1 {
@@ -46,6 +97,9 @@
reg = <0x0 0x1>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
A53_0: cpu@100 {
@@ -53,6 +107,9 @@
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
A53_1: cpu@101 {
@@ -60,6 +117,9 @@
reg = <0x0 0x101>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
A53_2: cpu@102 {
@@ -67,6 +127,9 @@
reg = <0x0 0x102>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
A53_3: cpu@103 {
@@ -74,145 +137,39 @@
reg = <0x0 0x103>;
device_type = "cpu";
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
- };
- memory@80000000 {
- device_type = "memory";
- /* last 16MB of the first memory area is reserved for secure world use by firmware */
- reg = <0x00000000 0x80000000 0x0 0x7f000000>,
- <0x00000008 0x80000000 0x1 0x80000000>;
- };
+ A57_L2: l2-cache0 {
+ compatible = "cache";
+ };
- gic: interrupt-controller@2c001000 {
- compatible = "arm,gic-400", "arm,cortex-a15-gic";
- reg = <0x0 0x2c010000 0 0x1000>,
- <0x0 0x2c02f000 0 0x2000>,
- <0x0 0x2c04f000 0 0x2000>,
- <0x0 0x2c06f000 0 0x2000>;
- #address-cells = <0>;
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ A53_L2: l2-cache1 {
+ compatible = "cache";
+ };
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A57_0>,
+ <&A57_1>;
};
- pmu {
- compatible = "arm,armv8-pmuv3";
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- /include/ "juno-clocks.dtsi"
-
- dma@7ff00000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0x7ff00000 0 0x1000>;
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_faxiclk>;
- clock-names = "apb_pclk";
- };
-
- soc_uart0: uart@7ff80000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0x7ff80000 0x0 0x1000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
- clock-names = "uartclk", "apb_pclk";
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A53_0>,
+ <&A53_1>,
+ <&A53_2>,
+ <&A53_3>;
};
- i2c@7ffa0000 {
- compatible = "snps,designware-i2c";
- reg = <0x0 0x7ffa0000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <400000>;
- i2c-sda-hold-time-ns = <500>;
- clocks = <&soc_smc50mhz>;
-
- dvi0: dvi-transmitter@70 {
- compatible = "nxp,tda998x";
- reg = <0x70>;
- };
-
- dvi1: dvi-transmitter@71 {
- compatible = "nxp,tda998x";
- reg = <0x71>;
- };
- };
-
- ohci@7ffb0000 {
- compatible = "generic-ohci";
- reg = <0x0 0x7ffb0000 0x0 0x10000>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- ehci@7ffc0000 {
- compatible = "generic-ehci";
- reg = <0x0 0x7ffc0000 0x0 0x10000>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- memory-controller@7ffd0000 {
- compatible = "arm,pl354", "arm,primecell";
- reg = <0 0x7ffd0000 0 0x1000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_smc50mhz>;
- clock-names = "apb_pclk";
- };
-
- smb {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 15>;
- interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
-
- /include/ "juno-motherboard.dtsi"
- };
+ #include "juno-base.dtsi"
};
diff --git a/src/arm64/arm/rtsm_ve-aemv8a.dts b/src/arm64/arm/rtsm_ve-aemv8a.dts
index efc59b3baf63f..20addabbd127c 100644
--- a/src/arm64/arm/rtsm_ve-aemv8a.dts
+++ b/src/arm64/arm/rtsm_ve-aemv8a.dts
@@ -37,6 +37,7 @@
reg = <0x0 0x0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@1 {
device_type = "cpu";
@@ -44,6 +45,7 @@
reg = <0x0 0x1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@2 {
device_type = "cpu";
@@ -51,6 +53,7 @@
reg = <0x0 0x2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
};
cpu@3 {
device_type = "cpu";
@@ -58,6 +61,11 @@
reg = <0x0 0x3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
};
};
diff --git a/src/arm64/arm/rtsm_ve-motherboard.dtsi b/src/arm64/arm/rtsm_ve-motherboard.dtsi
index c46cbb29f3c6b..88a7583ed7a72 100644
--- a/src/arm64/arm/rtsm_ve-motherboard.dtsi
+++ b/src/arm64/arm/rtsm_ve-motherboard.dtsi
@@ -74,6 +74,8 @@
clock-names = "refclk", "timclk", "apb_pclk";
#clock-cells = <1>;
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
aaci@040000 {
diff --git a/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts b/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
new file mode 100644
index 0000000000000..bb3c26d1154da
--- /dev/null
+++ b/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -0,0 +1,191 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * LogicTile Express 20MG
+ * V2F-1XV7
+ *
+ * Cortex-A53 (2 cores) Soft Macrocell Model
+ *
+ * HBI-0247C
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "V2F-1XV7 Cortex-A53x2 SMM";
+ arm,hbi = <0x247>;
+ arm,vexpress,site = <0xf>;
+ compatible = "arm,vexpress,v2f-1xv7,ca53x2", "arm,vexpress,v2f-1xv7", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen {
+ stdout-path = "serial0:38400n8";
+ };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ i2c0 = &v2m_i2c_dvi;
+ i2c1 = &v2m_i2c_pcie;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0 0>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0 1>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0x2c001000 0 0x1000>,
+ <0 0x2c002000 0 0x2000>,
+ <0 0x2c004000 0 0x2000>,
+ <0 0x2c006000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ smbclk: osc@4 {
+ /* SMC clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 4>;
+ freq-range = <40000000 40000000>;
+ #clock-cells = <0>;
+ clock-output-names = "smclk";
+ };
+
+ volt@0 {
+ /* VIO to expansion board above */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO_UP";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ volt@1 {
+ /* 12V from power connector J6 */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 1>;
+ regulator-name = "12";
+ regulator-always-on;
+ };
+
+ temp@0 {
+ /* FPGA temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "FPGA";
+ };
+ };
+
+ smb {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+ /include/ "vexpress-v2m-rs1.dtsi"
+ };
+};
diff --git a/src/arm64/arm/vexpress-v2m-rs1.dtsi b/src/arm64/arm/vexpress-v2m-rs1.dtsi
new file mode 100644
index 0000000000000..21b02874bea3c
--- /dev/null
+++ b/src/arm64/arm/vexpress-v2m-rs1.dtsi
@@ -0,0 +1,442 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+
+ motherboard {
+ model = "V2M-P1";
+ arm,hbi = <0x190>;
+ arm,vexpress,site = <0>;
+ arm,v2m-memory-map = "rs1";
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ ranges;
+
+ flash@0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <4 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ psram@1,00000000 {
+ compatible = "arm,vexpress-psram", "mtd-ram";
+ reg = <1 0x00000000 0x02000000>;
+ bank-width = <4>;
+ };
+
+ v2m_video_ram: vram@2,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <2 0x00000000 0x00800000>;
+ };
+
+ ethernet@2,02000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&v2m_fixed_3v3>;
+ vddvario-supply = <&v2m_fixed_3v3>;
+ };
+
+ usb@2,03000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <2 0x03000000 0x20000>;
+ interrupts = <16>;
+ port1-otg;
+ };
+
+ iofpga@3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ v2m_sysreg: sysreg@010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+
+ v2m_led_gpios: sys_led@08 {
+ compatible = "arm,vexpress-sysreg,sys_led";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_mmc_gpios: sys_mci@48 {
+ compatible = "arm,vexpress-sysreg,sys_mci";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_flash_gpios: sys_flash@4c {
+ compatible = "arm,vexpress-sysreg,sys_flash";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ v2m_sysctl: sysctl@020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+ };
+
+ /* PCI-E I2C bus */
+ v2m_i2c_pcie: i2c@030000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x030000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcie-switch@60 {
+ compatible = "idt,89hpes32h8";
+ reg = <0x60>;
+ };
+ };
+
+ aaci@040000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ clocks = <&smbclk>;
+ clock-names = "apb_pclk";
+ };
+
+ mmci@050000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <9 10>;
+ cd-gpios = <&v2m_mmc_gpios 0 0>;
+ wp-gpios = <&v2m_mmc_gpios 1 0>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&v2m_fixed_3v3>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ kmi@060000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <12>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi@070000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <13>;
+ clocks = <&v2m_clk24mhz>, <&smbclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ v2m_serial0: uart@090000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial1: uart@0a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial2: uart@0b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial3: uart@0c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_oscclk2>, <&smbclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ wdt@0f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0>;
+ clocks = <&v2m_refclk32khz>, <&smbclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ v2m_timer01: timer@110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <2>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ v2m_timer23: timer@120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ interrupts = <3>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ /* DVI I2C bus */
+ v2m_i2c_dvi: i2c@160000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x160000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dvi-transmitter@39 {
+ compatible = "sil,sii9022-tpi", "sil,sii9022";
+ reg = <0x39>;
+ };
+
+ dvi-transmitter@60 {
+ compatible = "sil,sii9022-cpi", "sil,sii9022";
+ reg = <0x60>;
+ };
+ };
+
+ rtc@170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <4>;
+ clocks = <&smbclk>;
+ clock-names = "apb_pclk";
+ };
+
+ compact-flash@1a0000 {
+ compatible = "arm,vexpress-cf", "ata-generic";
+ reg = <0x1a0000 0x100
+ 0x1a0100 0xf00>;
+ reg-shift = <2>;
+ };
+
+ clcd@1f0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f0000 0x1000>;
+ interrupt-names = "combined";
+ interrupts = <14>;
+ clocks = <&v2m_oscclk1>, <&smbclk>;
+ clock-names = "clcdclk", "apb_pclk";
+ memory-region = <&v2m_video_ram>;
+ max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
+
+ port {
+ v2m_clcd_pads: endpoint {
+ remote-endpoint = <&v2m_clcd_panel>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+
+ panel {
+ compatible = "panel-dpi";
+
+ port {
+ v2m_clcd_panel: endpoint {
+ remote-endpoint = <&v2m_clcd_pads>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ hback-porch = <40>;
+ hfront-porch = <24>;
+ hsync-len = <96>;
+ vactive = <480>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ vsync-len = <2>;
+ };
+ };
+ };
+ };
+
+ v2m_fixed_3v3: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
+
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user@1 {
+ label = "v2m:green:user1";
+ gpios = <&v2m_led_gpios 0 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user@2 {
+ label = "v2m:green:user2";
+ gpios = <&v2m_led_gpios 1 0>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user@3 {
+ label = "v2m:green:user3";
+ gpios = <&v2m_led_gpios 2 0>;
+ linux,default-trigger = "cpu0";
+ };
+
+ user@4 {
+ label = "v2m:green:user4";
+ gpios = <&v2m_led_gpios 3 0>;
+ linux,default-trigger = "cpu1";
+ };
+
+ user@5 {
+ label = "v2m:green:user5";
+ gpios = <&v2m_led_gpios 4 0>;
+ linux,default-trigger = "cpu2";
+ };
+
+ user@6 {
+ label = "v2m:green:user6";
+ gpios = <&v2m_led_gpios 5 0>;
+ linux,default-trigger = "cpu3";
+ };
+
+ user@7 {
+ label = "v2m:green:user7";
+ gpios = <&v2m_led_gpios 6 0>;
+ linux,default-trigger = "cpu4";
+ };
+
+ user@8 {
+ label = "v2m:green:user8";
+ gpios = <&v2m_led_gpios 7 0>;
+ linux,default-trigger = "cpu5";
+ };
+ };
+
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ osc@0 {
+ /* MCC static memory clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 0>;
+ freq-range = <25000000 60000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk0";
+ };
+
+ v2m_oscclk1: osc@1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 65000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ v2m_oscclk2: osc@2 {
+ /* IO FPGA peripheral clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 2>;
+ freq-range = <24000000 24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk2";
+ };
+
+ volt@0 {
+ /* Logic level voltage */
+ compatible = "arm,vexpress-volt";
+ arm,vexpress-sysreg,func = <2 0>;
+ regulator-name = "VIO";
+ regulator-always-on;
+ label = "VIO";
+ };
+
+ temp@0 {
+ /* MCC internal operating temperature */
+ compatible = "arm,vexpress-temp";
+ arm,vexpress-sysreg,func = <4 0>;
+ label = "MCC";
+ };
+
+ reset@0 {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga@0 {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown@0 {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot@0 {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode@0 {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
+ };
generated by cgit v1.3 (git 2.53.0) at 2026-09-08 06:13:18 +0000