1 files changed, 55 insertions, 28 deletions

diff --git a/share/man/man9/zero_copy.9 b/share/man/man9/zero_copy.9
index 232492d99f4d..5d9b077d7eb6 100644
--- a/share/man/man9/zero_copy.9
+++ b/share/man/man9/zero_copy.9
@@ -32,13 +32,16 @@
 .Nm zero_copy ,
 .Nm zero_copy_sockets
 .Sh SYNOPSIS
-.Cd options ZERO_COPY_SOCKETS
+.Cd "options ZERO_COPY_SOCKETS"
 .Sh DESCRIPTION
-The FreeBSD kernel includes a facility for eliminating data copies on
+The
+.Fx
+kernel includes a facility for eliminating data copies on
 socket reads and writes.
 .Pp
 This code is collectively known as the zero copy sockets code, because during
-normal network I/O, data will not be copied by the CPU at all.  Rather it
+normal network I/O, data will not be copied by the CPU at all.
+Rather it
 will be DMAed from the user's buffer to the NIC (for sends), or DMAed from
 the NIC to a buffer that will then be given to the user (receives).
 .Pp
@@ -48,60 +51,79 @@ programmers should be aware of when trying to take advantage of this
 functionality.
 .Pp
 For sending data, there are no special requirements or capabilities that
-the sending NIC must have.  The data written to the socket, though, must be
+the sending NIC must have.
+The data written to the socket, though, must be
 at least a page in size and page aligned in order to be mapped into the
-kernel.  If it doesn't meet the page size and alignment constraints, it
+kernel.
+If it does not meet the page size and alignment constraints, it
 will be copied into the kernel, as is normally the case with socket I/O.
 .Pp
 The user should be careful not to overwrite buffers that have been written
 to the socket before the data has been freed by the kernel, and the
-copy-on-write mapping cleared.  If a buffer is overwritten before it has
+copy-on-write mapping cleared.
+If a buffer is overwritten before it has
 been given up by the kernel, the data will be copied, and no savings in CPU
 utilization and memory bandwidth utilization will be realized.
 .Pp
 The
 .Xr socket 2
-API doesn't really give the user any indication of when his data has
+API does not really give the user any indication of when his data has
 actually been sent over the wire, or when the data has been freed from
-kernel buffers.  For protocols like TCP, the data will be kept around in
+kernel buffers.
+For protocols like TCP, the data will be kept around in
 the kernel until it has been acknowledged by the other side; it must be
 kept until the acknowledgement is received in case retransmission is required.
 .Pp
 From an application standpoint, the best way to guarantee that the data has
 been sent out over the wire and freed by the kernel (for TCP-based sockets)
-is to set a socket buffer size (see the SO_SNDBUF socket option in the
+is to set a socket buffer size (see the
+.Dv SO_SNDBUF
+socket option in the
 .Xr setsockopt 2
 man page) appropriate for the application and network environment and then
 make sure you have sent out twice as much data as the socket buffer size
-before reusing a buffer.  For TCP, the send and receive socket buffer sizes
-generally directly correspond to the TCP window size.  
+before reusing a buffer.
+For TCP, the send and receive socket buffer sizes
+generally directly correspond to the TCP window size.
 .Pp
 For receiving data, in order to take advantage of the zero copy receive
 code, the user must have a NIC that is configured for an MTU greater than
-the architecture page size.  (e.g., for alpha this would be 8KB, for i386,
-it would be 4KB)  Additionally, in order for zero copy receive to work, 
+the architecture page size.
+(E.g., for alpha this would be 8KB, for i386,
+it would be 4KB.)
+Additionally, in order for zero copy receive to work,
 packet payloads must be at least a page in size and page aligned.
 .Pp
 Achieving page aligned payloads requires a NIC that can split an incoming
-packet into multiple buffers.  It also generally requires some sort of
+packet into multiple buffers.
+It also generally requires some sort of
 intelligence on the NIC to make sure that the payload starts in its own
-buffer.  This is called "header splitting".  Currently the only NICs with
+buffer.
+This is called
+.Dq "header splitting" .
+Currently the only NICs with
 support for header splitting are Alteon Tigon 2 based boards running
-slightly modified firmware.  The FreeBSD
+slightly modified firmware.
+The
+.Fx
 .Xr ti 4
-driver includes modified firmware for Tigon 2 boards only.  Header
+driver includes modified firmware for Tigon 2 boards only.
+Header
 splitting code can be written, however, for any NIC that allows putting
 received packets into multiple buffers and that has enough programability
 to determine that the header should go into one buffer and the payload into
 another.
 .Pp
-You can also do a form of header splitting that doesn't require any NIC
+You can also do a form of header splitting that does not require any NIC
 modifications if your NIC is at least capable of splitting packets into
-multiple buffers.  This requires that you optimize the NIC driver for your
-most common packet header size.  If that size (ethernet + IP + TCP headers)
+multiple buffers.
+This requires that you optimize the NIC driver for your
+most common packet header size.
+If that size (ethernet + IP + TCP headers)
 is generally 66 bytes, for instance, you would set the first buffer in a
 set for a particular packet to be 66 bytes long, and then subsequent
-buffers would be a page in size.  For packets that have headers that are
+buffers would be a page in size.
+For packets that have headers that are
 exactly 66 bytes long, your payload will be page aligned.
 .Pp
 The other requirement for zero copy receive to work is that the buffer that
@@ -110,13 +132,15 @@ in size and page aligned.
 .Pp
 Obviously the requirements for receive side zero copy are impossible to
 meet without NIC hardware that is programmable enough to do header
-splitting of some sort.  Since most NICs aren't that programmable, or their
-manufacturers won't share the source code to their firmware, this approach
-to zero copy receive isn't widely useful.
+splitting of some sort.
+Since most NICs are not that programmable, or their
+manufacturers will not share the source code to their firmware, this approach
+to zero copy receive is not widely useful.
 .Pp
 There are other approaches, such as RDMA and TCP Offload, that may
 potentially help alleviate the CPU overhead associated with copying data
-out of the kernel.  Most known techniques require some sort of support at
+out of the kernel.
+Most known techniques require some sort of support at
 the NIC level to work, and describing such techniques is beyond the scope
 of this manual page.
 .Pp
@@ -128,15 +152,18 @@ and
 .Nm sysctl
 variables respectively.
 .Sh SEE ALSO
-.Xr socket 2 ,
 .Xr sendfile 2 ,
+.Xr socket 2 ,
 .Xr ti 4 ,
 .Xr jumbo 9
 .Sh HISTORY
-The zero copy sockets code first appeared in FreeBSD 5.0, although it has
+The zero copy sockets code first appeared in
+.Fx 5.0 ,
+although it has
 been in existence in patch form since at least mid-1999.
 .Sh AUTHORS
+.An -nosplit
 The zero copy sockets code was originally written by
 .An Andrew Gallatin Aq gallatin@FreeBSD.org
-and substantially modified and updated by 
+and substantially modified and updated by
 .An Kenneth Merry Aq ken@FreeBSD.org .