1 files changed, 11 insertions, 645 deletions

diff --git a/UPDATING b/UPDATING
index 02c755fc3830..3e6fc1f32a39 100644
--- a/UPDATING
+++ b/UPDATING
@@ -5,668 +5,34 @@ directly to him.  See end of file for further details.  For commonly
 done items, please see the end of the file.  Search for 'COMMON
 ITEMS:'
 
-20000308:
-	The binary interface of perl to its modules changed.  You
-	will need to recompile any perl moudles after an
-	installworld.  This includes all ports matching the pattern 
-	/usr/ports/*/p5-*.
-
-20000303:
-	CMSG_XXX macros offset in <sys/socket.h> has changed to
-	conform RFC-2292.  All affected applications have been
-	corrected.  The i386 platform's offsets haven't changed, but
-	the alpha's did.  When you build and install new kernel on
-	FreeBSD/alpha, you must also do a make world.
-
-20000225:
-	OpenSSH has been added to FreeBSD.  This may conflict with the
-	ports/security/ssh port since it installs binaries into
-	/usr/bin and the port goes into /usr/local/bin.  Most paths
-	have /usr/bin in the path before /usr/local/bin, so problems
-	may arise.  If you don't want OpenSSH, add NO_OPENSSH=yes to
-	your make.conf.
-
-	You will also need to enable OpenSSH in /etc/rc.conf if you
-	want to run the new servers.  You may need to move your host
-	key and other config files from /usr/local/etc to /etc/ssh.
-
-	OpenSSH's command line parsing, available options and default
-	settings aren't the same as ssh, so some care needs to be
-	taken in its operation.  One should do a full audit of all
-	configuration settings.
-
-20000205:
-	The xinstall problem has kinda sorta been corrected.  The 
-	following is known to work by the author of UPDATING.  It
-	is what he did to update his laptop.  It is likely the same
-	effect as the work around listed in 20000129.
-		make buildworld
-		make installworld	This will fail
-		cd usr.bin/xinstall
-		make clean all install NOSHARED=YES
-		cd ../..
-		make installworld
-	If it doesn't work for you, then I'm sure that there will be
-	another 100 messages in -current.
-
-20000204:
-	libipsec version number changed from 2 to 0.  The original
-	commit of Jan 6 incorrectly set this to 2.  Remove
-	/usr/lib/libipsec.so.2* before the buildworld and rebuild
-	anything that uses libipsec.so after you install the new
-	version.
-
-20000201:
-	The rcmd related functions have been aligned with other BSD
-	implementations.  rlogind and rshd have been changed to use
-	the new API.  A make world is recommended to keep them in sync
-	with the libraries they use.
-
-	http://www.FreeBSD.org/cgi/cvsweb.cgi/src/lib/libc/net/rcmd.c
-	has the details.
-
-20000129:
-	{set,get}flags have been added to the tree for rather dubious
-	reasons.
-
-	IF AND ONLY IF installworld fails:
-		make -k -DNOFSCHG installworld
-		make installworld
-	This issue was resolved Feb 5, 2000.
-
-20000125:
-	rcmd_af() is added for multiple address family support.  rsh
-	and rlogin have been updated to use this to support INET6.  A
-	make world is recommended to keep them in sync with the
-	libraries they use.
-
-20000124:
-	The default way that virtual tables in our default C++
-	compiler has changed.  We used to use THUNKS for virtual
-	inheritance.  Unfortunately there are bugs that The GCC
-	developers thought would be fixed in GCC 2.95.  However it
-	isn't.
-
-	After this change existing applications written in C++ may
-	give errors like below when you try to run them:
-
-/usr/libexec/ld-elf.so.1: /usr/lib/libstdc++.so.3: Undefined symbol "__vt_7filebuf"
-
-	The only fix is to rebuild the application and any C++
-	libraries used.
-
-20000124:
-	The management of next_writeable has been move from the
-	kernel to userspace. This means that the burncd command
-	must be in sync with the kernel. So make world is your
-	friend.
-
-20000117:
-	GNU texinfo upgraded to 4.0.  It is recommended that you use
-	make buildworld to update.
-
-20000117:
-	CAM_VERSION has been increased.  Recompile all programs that
-	depend on it (tosha, camcontrol, etc) when moving to kernels
-	past this date.
-
-20000115:
-	pccard ioctls changed with a commit to have the kernel tell
-	pccardd which device it created, rather than having pccardd
-	dictate it to the kernel.  Recompile kernel and
-	pccardd/pccardc together.  pccardd/pccardc rely on a kernel
-	Makefile that must be installed prior to building them.  Make
-	world will automatically take care of this issue, but you need
-	to know if you are building by hand.
-
-20000109:
-	Your kernel config files need to be changed to s/controller/device/
-	in them.  You will need a new version of config to do this.
-
-20000107:
-	chown & chgrp moved again
-
-	This is a heads up to let you know that you need to 
-		    rm -f /sbin/chown /bin/chgrp
-	after your next `make world'.  Additionally you need to install
-	a new /dev/MAKEDEV (mergemaster(8) will assist you in this).
-
-20000107:
-	SHA-1 password support gone
-
-	As warned yesterday, I've just removed the ability for
-	libcrypt to understand SHA-1 passwords. This was present but
-	undocumented in the tree for the past few months and was
-	removed so it can be reimplemented properly as part of a
-	revamped libcrypt at a later date. Anyone who was actually
-	making use of the feature will have to update their passwords
-	back to MD5 before they reinstall the library.
-
-20000106:
-	ioctl numbers changed for dvdio ioctls.  You will need to recompile
-	anything that uses them.  wormcontrol has been deprecated in
-	favor of burncd.
-
-19991223:
-	Building linux and svr4 compatibility into the kernel now
-	requires /usr/bin/genassym.  Go to /usr/src/usr.bin/genassym,
-	do "make obj ; make clean depend all install" before building
-	your kernel.
-
-19991218:
-	sendmail.cf has moved from /etc/sendmail.cf to
-	/etc/mail/sendmail.cf.  You may need to adjust /etc/rc.conf
-	and /etc/rc to cope as well as moving sendmail.cf.
-
-19991216:
-	ntp 4.0.98 has replaced the ancient xntpd.  The daemon name
-	changed from xntpd to ntpd, so you may need to update your
-	/etc/rc.conf file.  The ntp.conf files are compatible with the
-	old release, unless you are using a local reference clock.
-	Details about ntp4 can be found at http://www.ntp.org/.
-
-	xntpd will be cvs removed from the repo in about a week.
-
-19991213:
-	Soren updated the ata driver.  Please update to at least this
-	version before submitting bug reports.
-
-19991210:
-	The ata driver has become the primary ata/ide/atapi driver in
-	the kernel.  The wd driver is obsolete.  You should upgrade your
-	machine to the new ata driver.  You will need to follow the
-	directions for updating the devices in the 19991205 entry.  You
-	will need to update all occurances of wd to ad in your config files
-	(/etc/rc.conf, /etc/fstab, etc).  A compatibility device exists
-	for wd for the time being, but once you have determined that
-	ata is working for you, transition to the new ad devices.
-
-19991205:
-	Block devices are going away.  You will need to update your /dev
-	tree with a fresh copy of MAKEDEV for things to always work in 
-	the future.  fsck is unable to cope with dirty file systems
-	after this change, so it may work for you or it may not.
-
-	See "To rebuild disk /dev entries" at the end of the file.
-
-	*** All uses of block devices must be converted to char devices.
-	*** Likely the only thing impacted is dumpdev in /etc/rc.conf
-
-19991204:
-	The dc interface has replaced al, ax, dm, pn and mx.  The former
-	have been removed.
-
-19991204:
-	Support for the old 'sd' device names has been removed in
-	favor of 'da'.  Please update your /etc/fstab, /etc/rc.conf
-	and any other places you might have sd names cached.
-	Generally these changes are as simple as s=/dev/sd=/dev/da=g,
-	but be careful to make sure that things are really that
-	simple.  You may also need to create /dev entries for the da
-	devices as well.
-
-	See "To rebuild disk /dev entries" at the end of the file.
-
-19991203:
-	BAD144 support has been removed.  Cope or replace the hardware.
-
-19991129:
-	ALPHA users take note.  All klds will need to be recompiled for
-	kernels build after this date.  It is a good time to update since
-	pal.s will be going away soon.
-
-19991126:
-	MFS_ROOT and MFS_ROOT_SIZE are gone, replaced by MD_ROOT and
-	MD_ROOT_SIZE options in the md driver.  md driver now deals with
-	the hacks.  You should add md driver to kerneles that have
-	MFS_ROOT, et al.  See GENERIC or LINT for details.
-
-19991125:
-	The ep changed a while ago and can no longer be used with hard
-	wired addresses in the config file.
-
-19991122:
-	The bridge drivers for sound cards have been committed.  Please
-	see LINT for instructions for your card, if it still works at
-	all.
-
-19991113:
-	Gcc 2.95.2 is now the default compiler.
-
-19991030:
-	/etc/radius.conf file format has changed.The format change is
-	as follows.  Each server line in the file should now begin
-	with a new field containing either "auth" for RADIUS
-	authentication, or "acct" for RADIUS accounting.  Formerly
-	only authentication was supported.  If the first field isn't
-	"auth" or "acct" then the code assumes that "auth" is
-	intended.  (That's the compatibility hack.)
-
-19991015:
-	PCCARD has been updated to attach pcic to the isa bus.  Therefore
-	you will need to modify kernel config files that have pcic/card
-	in them as follows:
-		controller	pcic0	at isa?
-		controller	pcic1	at isa?
-		controller	card0
-
-19990929:
-	The sigset_t datatype has been changed from an integral type
-	to a compound type and can hold 128 signals. Syscalls directly
-	or indirectly using the new sigset_t have been added as to
-	maintain compatibility with existing binaries. A new kernel must
-	be made and installed and booted with before a make world can
-	be done.
-
-	***************************************************************
-		RECOMPILE AND REINSTALL KERNEL BEFORE MAKEWORLD
-	***************************************************************
-
-19990919:
-	New jail syscall format requires recompilation of jail(8) with
-	fresh headers installed (or a make world will do it for you).
-
-19990914:
-	Matt Dillon checked in many vm related things and sent a heads up
-	to -current urging caution and to report vm problems to him.
-	As of the 19th, no killer problems have been reported, but you
-	have been warned.
-
-19990908:
-	The new miibus has been added to the system.  If you are using
-	the dm, rl, sf, sis, ste, tl, wb or xl drivers, you need to
-	add "controller miibus0" to your config file.
-
-19990905:
-	/var/cron/log has been moved to /var/log/cron to get all the
-	log files in one place.
-
-19990831:
-	tn3270 has been removed from the base system and added as a port.
-
-19990830:
-	User-visible TCP timers are now expressed in units of 1ms, instead
-	of 500ms, so if you've customized any timer values under
-	``net.inet.tcp'', multiply them by 500 to preserve TCP's behavior.
-
-19990828:
-	RCS Id tags changed to FreeBSD.  This will cause huge cvsup
-	updates.
-
-19990821:
-	On 28-May-1999 libreadline was upgraded from readline-2.2 to
-	readline-4.0.  At that time the shared library major version
-	number was bumped from "3" to "4".  It has been deemed that
-	the interface change between readline-2.2 and readline-4.0 was
-	not sufficient to warrant the version number bump.
-
-	Thus I have reverted it back to "3".  You will need to perform
-	the below immediately before your next ``make world'':
-	    cd /usr/lib
-	    ls -l libreadline.so.4
-	        (if you have /usr/lib/libreadline.so.4)
-	    mv libreadline.so.4 libreadline.so.3
-	    rm -f libreadline.so
-	    ln -s libreadline.so.3 libreadline.so
-
-19990801:
-	Changes to the pccardd kernel interface require that you recompile
-	pccardd for new kernel.
-
-19980725:
-	The ipfw interface to the kernel has changed.  You will need to
-	recompile ipfw programs for the new kernel.
-
-19990715:
-	The bpfilter device has been renamed to bpf.  You will need to 
-	change your config files in order to enable this in newer kernels.
-
-19990704:
-	src/contrib/sys/softupdates is moving to
-	src/sys/contrib/softupdates.  Update your symbolic links/etc.
-
-19990702:
-	Major changes have been made to vinum and its interface.  See
-	the man page (vinum(8)) for details.  Look at the concat,
-	mirror and stripe commands, as well as the SIMPLIFIED
-	CONFIGURATION section.
-
-19990628:
-	Newsyslog.conf has had a minor, but potentially dangerous,
-	change to its username/group syntax.  The old syntax was
-	user.group, while the new syntax is user:group.
-
-19990627:
-	Inetd wrapping default has changed.  Please see the updated
-	man page for details.
-
-19990623:
-	Compaq Smart Raid driver committed as ida.
-
-19990622:
-	The second phase of syscons cleanup has happened.  Some
-	functionality has been made optional.  For details, see
-        http://www.freebsd.org/~yokota/sc_update-June.txt
-	Everyone will need to re-config(8) their kernels, but old
-	binaries will work with the new kernel.
-
-19990620:
-	IPFW uid/gid-based filtering support has been committed. This
-	breaks binary compatibility with previous copies of
-	ipfw(8). Any utilities using the ioctl()s of ipfw (especially
-	ipfw(8)) need to be recompiled with the newest headers
-	installed.
-
-19990618:
-	Inetd now wraps all stream-based services, including internals.
-	Syslog "severity" options are honoured. Installed syslog.conf
-	and hosts.allow should be checked.
-
-19990509:
-	Most of the problems with newbus have been corrected, but
-	it is still current and evolving.
-
-	libcam's ABI has changed.  You must recompile the world and
-	any ports that use it.
-
-19990427:
-	Massive changes to SMP went into the tree that should speed
-	things up.  However, if you experience problems with SMP 
-	machines, you can back off to the PRE_SMP_VMSHARE tag in the
-	CVS repository (or run an MP kernel).
-
-19990420:
-	Pccardd and the pccard bus in general seem to be broken or
-	most people.  Soren has patches to make it better for some,
-	but not all people.  Work is underway to make it better for
-	all people.
-
-19990416:
-	new bus changes integrated into -current.  Many problems were
-	initially reported, but most have been fixed.  You'll need a
-	new config and to tweak your kernel config file the way that
-	GENERIC was tweaked.  Keep a copy of your old kernel when
-	upgrading in case your new kernel doesn't work (and report the
-	breakage to current@freebsd.org).
-
-	As of 19990421 the remaining problems/quirks are
-
-	o sio no longer supports pnp nor pccard.  This will be corrected,
-	  but the new pccard code needs to be completed.
-	o Some of the sound drivers broke for some people.  It seems
-	  inconsistant as to who/what/when/where things broke.
-	o Duplicate device entries in your config do not work.  Previously
-	  they were silently ignored.  psm0 seems to be the most common
-	  duplicate choice, although some reports have come in from people
-	  that wired their scsi disk entries.
-	o You must move the keyboard and mouse attachments from the
-	  isa bus to the atkbdc bus.  See GENERIC for details.
-	o Machines with multiple host-pci bridges (Intel 450NX) will not
-	  probe the second pci bus.
-	o Some probe ordering may have changed, so device naming may change
-	  with the new kernel.  If you have multiple devices, please double
-	  check to make sure they didn't move.  This is especially true
-	  for cards on different buses.
-	o The bus attachment for vga0 is always isa0 and never pci0 when
-	  it is in fact a pci card.  It is safe to ignore this.
-	o The format of the boot messages has changed (and is not
-	  guaranteed to be constant for a while) so you may see this
-	  in some shell scripts that diff dmesg from day to day as well
-	  as scripts that parse dmesg output.
-
-19990414:
-	cc -aout sometimes has problems compiling with -g, remove -g
-	from those compilation units affected until this is corrected.
-
-	cc -aout has problems with producing some threaded libraries,
-	so make world -DWANT_AOUT is not functional at this time.
-
-	Since make world for a.out isn't functional, you cannot do
-	make aout-to-elf from a pre-egcs a.out system.  To work around
-	this problem, make aout-to-elf using 3.1-stable first (or a
-	pre egcs -current) and then a simple make world will take you
-	the rest of the way with a -current source base.
-
-19990413:
-	Make -j works again for make world.  As always, use it with
-	care, and be sure to try a make world w/o -j before reporting
-	problems (that is, know if the problem exists w/o -j before
-	reporting the problem with -j).
-
-19990413:
-	Note cc -aout, which had been broken since the conversion to
-	egcs, now supposedly works.  If you have rebuilt things like
-	XFree86 a.out libraries, you should rebuild them again or
-	progams that use them, including netscape, will fail to work.
-
-19990409:
-	NOTE: New c++ compiler cannot be used with c++ binaries from
-	the old compiler and vice versa.
-
-19990408:
-	In recent days egcs has been imported into the tree.  A number
-	of problems have been discussed in -current.  Here is a highlight
-	of a few of the more common ones.  With the exception of make
-	-j n, they have been claimed to have been fixed.
-
-	c++ is broken after make world: This is correct.  Because we
-	changed compilers two make worlds are necessary to get C++
-	working again.  The code generated by the old compiler and new
-	compiler are not compatible, so things wind up being
-	undefined.
-
-	cpp is broken in make world:  There was a window where cpp
-	would be built incorrectly.  The fix for this is
-		cd src/gnu/usr.bin/cc
-		make clean
-		make all
-		make install
-	and this should correct your problems.  See the -current
-	archives for a version of this that does moer cleaning.
-
-	Make -j n doesn't work.  Work contiunes to make this work,
-	I've seen no reports of success as of April 7th.
-
-19990329:
-	Previously, one would define "NOAOUT" to keep from building
-	the legacy a.out bits.  Now one would define "WANT_AOUT" to
-	build them.
-
-19990316:
-	The name of the old wd.c and atapi.c based CDROM driver has
-	been changed back to wcd. So update your config file to use
-	"device wcd" instead of "device acd".
-
-19990314:
-	For those of you using the VN device as a loadable module,
-	please be aware that the new VN device has been committed to
-	-4.x and cannot yet be used as a loadable module.  This will
-	be fixed in the future.
-	
-19990309:
-	New loader.rc mechanism.  Please see src/sys/boot/README for
-	details.
-
-19990225:
-	struct proc size changed.  Recompile kernel and the
-	usual suspects.  Make world if in doubt.
-
-19990214:
-	The nlpt driver has changed names back to be the lpt driver.
-	See ppbus(4) or http://www.freebsd.org/~nsouch/ppbus.html
-	for proper configuration details.
-
-19990210:
-	The 'lpt' driver is now obsolete.  Replace it with the 'nlpt'
-	driver and 'ppbus' controller combination.
-
-19990209:
-	New devstat API requires recompilation of libdevstat, systat,
-	iostat, vmstat and rpc.rstatd.  A new kernel is also required.
-	make world + building a kernel should do all of this.  Any
-	ports that use devstat need to be recompiled as well.
-
-19990125:
-	Linux threads options has gone away (they are now standard in
-	the FreeBSD kernel).  A recompile of all libkvm using programs
-	is in order (or better yet a make world).
-
-19990122:
-	On or about this date there was a small window when the boot
-	blocks had some minor problems which seemed to force one to
-	edit /etc/fstab.  This has been corrected, if you are seeing this
-	problem, please rebuild and reinstall your boot blocks.
-
-19990121:
-	Vinum has changed.  The "vinum read" command has changed.  For
-	updates, please see
-
-http://www.freebsd.org/cgi/getmsg.cgi?fetch=800363+0+current/freebsd-current
-
-	for details.  
-
-	Matt Dillon committed a boatload of VM changes, for
-	information please see
-
-http://www.freebsd.org/cgi/getmsg.cgi?fetch=886676+0+current/freebsd-current
-	or
-http://www.freebsd.org/cgi/getmsg.cgi?fetch=827400+0+current/freebsd-current
-
-	for details.  These changes will likely not impact anybody,
-	but large chagnes to the VM need at least a heads up.
-
-19990120:
-	Stable branch created.  You might want to consider using this
-	branch.  It is tagged with RELENG_3.
-
-19990119:
-	More work on the syscons driver has been committed.  Since
-	files moved around, you will need to reconfigure your kernel,
-	and make clean; make depend before rebuilding the kernel.  No
-	config file changes are needed.
-
-19990111:
-	New keyboard and video card drivers are introduced as the first
-	stage of console driver reorganization.  You are required to
-	update the kernel configuration file and rebuild the kernel.
-	kbdcontrol, vidcontrol, and screen savers also need recompilation.
-	The instruction can be found in
-
-		http://www.freebsd.org/~yokota/sc_update.txt
-
-	It has notes on splash screen too.
-
-19990106:
-	Robert Nordier was kind enough to make this page to enable people to
-	install the new bootblocks:
-
-		http://www.freebsd.org/~rnordier/boot.txt
-
-	When updating to ELF, make sure that you have updated your
-	/etc/rc files which have different ldconfig invocations for
-	elf and aout.  Otherwise things like X will stop working with
-	messages about being unable to find library files.  The
-	mergemaster utility in ports/sysutils/mergemaster helps to
-	keep critical files like this in sync, and its use is
-	recommended.
-
-19990104:
-	Information about ELF day (see 19981230) can be found in
-
-		http://www.freebsd.org/~peter/elfday.html
-
-	about the upcoming change, its motivations and instructions
-	for doing the upgrade.
-
-19981230:
-	You should install new bootblocks now.  The ELF kernel will
-	become default soon.  In addition, you'll need to upgrade
-	your userland programs to ELF before then as well.  Use
-	make aout-to-elf to upgrade your userland programs (old
-	a.out programs in, for example, /usr/local/bin will
-	continue to work, even after the upgrade).  See src/Makefile
-	for more details.
-
-19981224:
-	The old wcd driver has been deleted from the kernel.  The
-	driver that replaces it is named acd.  You'll need to change
-	this in your configuration files.
-
-	Failure to do this will result in "ATAPI CD-ROMs not
-	configured" at boot time.
-
-	The floppy tape driver (ft) has been removed from the kernel,
-	with no replacement driver.
-
-19981202:
-	New groups from 19981201 commented out of mtree, so they
-	aren't strictly needed, but still a good idea to have.
-
-19981201:
-	New user/group added: bind.  From src/etc/master.passwd and
-	src/etc/group:
-		% grep <newstuff> /usr/src/etc/group 
-		bind:*:53:
-		% grep <newstuff> /usr/src/etc/master.passwd 
-		tty:*:4:65533::0:0:Tty Sandbox:/:/sbin/nologin
-		kmem:*:5:65533::0:0:KMem Sandbox:/:/sbin/nologin
-		bind:*:53:53::0:0:Bind Sandbox:/:/sbin/nologin
-
-19981118:
-	PAM integrated into the tree.   Requires new /etc/pam.conf file
-	to silence warnings from authentication programs (login, etc).
-	See src/etc/pam.conf for a sample.
+20000318:
+	We've entered the tradtional post release dumping party.
+	Large kernel changes are being committed and are in the
+	works.  It is important to keep the systems' klds and kernel
+	in sync as kernel interfaces and structures are changing.
+	Before reporting kernel panics, make sure that all modules
+	that you are loading are up to date.
+
+20000315:
+	4.0 RELEASE shipped.  Please see the 4.0 UPDATING file for how
+	to upgrade to 4.0 from 3.x.
 
 COMMON ITEMS:
 
 	To build a kernel
 	-----------------
 	Update config, genassym and go:
-		cd src/usr.bin/genassym
-		make depend all install clean
-		cd ../../usr.sbin/config
-		make depend all install clean
-		cd ../../sys/i386/conf
 		config YOUR_KERNEL_HERE
 		cd ../../compile/YOUR_KERNEL_HERE
 		make depend && make
 		make install
 
-	To rebuild disk /dev entries
-	----------------------------
-
-	MAKEDEV should be copied from src/etc/MAKEDEV to /dev before
-	starting the following:
-
-		For N in the list of disks
-			MAKEDEV N			# eg ad0
-			for M in the list of slices
-				MAKEDEV NsMa		# eg ad0s1a
-
-
 	To rebuild everything
 	---------------------
 	make world
 
 	Except when it doesn't work.
 
-	To update from 3.x to 4.0 stable
-	--------------------------------
-	cd /usr/src
-	make buildworld
-	cd sbin/mknod
-	make install
-	<follow directions to build/install a kernel>
-	<follow rebuild disk /dev entries above>	[*]
-	reboot
-	<in single user>
-	cd /usr/src
-	make -DNOINFO installworld
-	make installworld
-
-	[*] You may need to switch from wd to ad ala 19991210
-
-
 FORMAT:
 
 This file contains a list, in reverse chronologocal order, of major