1 files changed, 33 insertions, 0 deletions

diff --git a/etc/modems b/etc/modems
new file mode 100644
index 000000000000..f8b605d90d87
--- /dev/null
+++ b/etc/modems
@@ -0,0 +1,33 @@
+#
+#	@(#)modems	3/24/95
+#
+# modems -- modem configuration data base file
+# see tip(1), modems(5)
+#
+# dial_command	         AT command to dial up remote
+# echo_off_command       AT command to turn off command echo
+# escape_guard_time      Shroud escape sequence with specified delay (ms)
+# escape_sequence        Return to command escape sequence
+# hangup_command         AT command to hangup modem
+# hw_flow_control        Enable RTS/CTS flow control between DTE/DCE
+# intercharacter_delay   Delay between characters sent to modem when issuing
+#                        commands
+# intercommand_delay     Minimum delay between commands to modem
+# init_string            AT command to initialize modem before dialing out
+# lock_baud              Use fixed DTE / DCE bit rate
+# reset_delay            Delay required by modem for reset
+#
+
+sportster|st|US Robotics Sportster 14.4K:dial_command=ATDT%s\r:hangup_command=ATH\r:\
+	:echo_off_command=ATE0\r:reset_command=AT&F1\r:\
+	:init_string=AT&B1&H1&R2&C1&D2\r:\
+	:escape_sequence=+++:hw_flow_control:lock_baud:intercharacter_delay#50:\
+	:intercommand_delay#250:escape_guard_time#500:reset_delay#2000:
+
+mt932|multitech|mt|Multitech 932:dial_command=ATDT%s\r:hangup_command=ATH\r:\
+	:echo_off_command=ATE0\r:reset_command=ATZ\r:\
+	:init_string=AT$BA0$SB38400&E1&E4&E13&E15Q0V1X4E0S0=0\r:\
+	:escape_sequence=+++:hw_flow_control:lock_baud:intercharacter_delay#50:\
+	:intercommand_delay#250:escape_guard_time#500:reset_delay#2000:
+
+generic|Generic AT command modem (use defaults):