2 files changed, 84 insertions, 84 deletions

diff --git a/release/sysinstall/help/en_US.ISO8859-1/partition.hlp b/release/sysinstall/help/en_US.ISO8859-1/partition.hlp
index f04e2eacc313..edbc9d8f8260 100644
--- a/release/sysinstall/help/en_US.ISO8859-1/partition.hlp
+++ b/release/sysinstall/help/en_US.ISO8859-1/partition.hlp
@@ -6,57 +6,57 @@ works.  It's not very hard to understand.  A "fully qualified slice name",
 that is the name of the file we open in /dev to talk to the slice,
 is optionally broken into 3 parts:
 
-	First you have the disk name.  Assume we have two SCSI
-	drives in our system, which gives us `sd0' and `sd1'.
+        First you have the disk name.  Assume we have two SCSI
+        drives in our system, which gives us `sd0' and `sd1'.
 
-	Next you have the "Slice" (or "Master Partition") number,
-	as seen in the Partition Editor.  Assume that our sd0 contains
-	two slices, a FreeBSD slice and a DOS slice.  This gives us
-	sd0s1 and sd0s2.  Let's also say that sd1 is completely devoted
-	to FreeBSD, so we have only one slice there: sd1s1.
+        Next you have the "Slice" (or "Master Partition") number,
+        as seen in the Partition Editor.  Assume that our sd0 contains
+        two slices, a FreeBSD slice and a DOS slice.  This gives us
+        sd0s1 and sd0s2.  Let's also say that sd1 is completely devoted
+        to FreeBSD, so we have only one slice there: sd1s1.
 
-	Next, if a slice is a FreeBSD slice, you have a number of
-	(confusingly named) "partitions" you can put inside of it.
-	These FreeBSD partitions are where various filesystems or swap
-	areas live, and using our hypothetical two-SCSI-disk machine
-	again, we might have something like the following layout on sd0:
+        Next, if a slice is a FreeBSD slice, you have a number of
+        (confusingly named) "partitions" you can put inside of it.
+        These FreeBSD partitions are where various filesystems or swap
+        areas live, and using our hypothetical two-SCSI-disk machine
+        again, we might have something like the following layout on sd0:
 
-		Name		Mountpoint
-		----		----------
-		sd0s1a		/
-		sd0s1b		<swap space>
-		sd0s1e		/usr
+                Name            Mountpoint
+                ----            ----------
+                sd0s1a          /
+                sd0s1b          <swap space>
+                sd0s1e          /usr
 
-	Because of historical convention, there is also a short-cut,
-	or "compatibility slice", that is maintained for easy access
-	to the first FreeBSD slice on a disk for those programs which
-	still don't know how to deal with the new slice scheme.
-	The compatibility slice names for our filesystem above would
-	look like:
+        Because of historical convention, there is also a short-cut,
+        or "compatibility slice", that is maintained for easy access
+        to the first FreeBSD slice on a disk for those programs which
+        still don't know how to deal with the new slice scheme.
+        The compatibility slice names for our filesystem above would
+        look like:
 
-		Name		Mountpoint
-		----		----------
-		sd0a		/
-		sd0b		<swap space>
-		sd0e		/usr
+                Name            Mountpoint
+                ----            ----------
+                sd0a            /
+                sd0b            <swap space>
+                sd0e            /usr
 
-	FreeBSD automatically maps the compatibility slice to the first
-	FreeBSD slice it finds (in this case, sd0s1).  You may have multiple
-	FreeBSD slices on a drive, but only the first one may be the
-	compatibility slice!
+        FreeBSD automatically maps the compatibility slice to the first
+        FreeBSD slice it finds (in this case, sd0s1).  You may have multiple
+        FreeBSD slices on a drive, but only the first one may be the
+        compatibility slice!
 
-	The compatibility slice will eventually be phased out, but
-	it is still important right now for several reasons:
+        The compatibility slice will eventually be phased out, but
+        it is still important right now for several reasons:
 
-		1. Some programs, as mentioned before, still don't work
-		   with the slice paradigm and need time to catch up.
+                1. Some programs, as mentioned before, still don't work
+                   with the slice paradigm and need time to catch up.
 
-		2. The FreeBSD boot blocks are unable to look for
-		   a root file system in anything but a compatibility
-		   slice right now.  This means that our root will always
-		   show up on "sd0a" in the above scenario, even though
-		   it really lives over on sd0s1a and would otherwise be
-		   referred to by its full slice name.
+                2. The FreeBSD boot blocks are unable to look for
+                   a root file system in anything but a compatibility
+                   slice right now.  This means that our root will always
+                   show up on "sd0a" in the above scenario, even though
+                   it really lives over on sd0s1a and would otherwise be
+                   referred to by its full slice name.
 
 Once you understand all this, then the label editor becomes fairly
 simple.  You're either carving up the FreeBSD slices displayed at the
diff --git a/release/sysinstall/help/en_US.ISO_8859-1/partition.hlp b/release/sysinstall/help/en_US.ISO_8859-1/partition.hlp
index f04e2eacc313..edbc9d8f8260 100644
--- a/release/sysinstall/help/en_US.ISO_8859-1/partition.hlp
+++ b/release/sysinstall/help/en_US.ISO_8859-1/partition.hlp
@@ -6,57 +6,57 @@ works.  It's not very hard to understand.  A "fully qualified slice name",
 that is the name of the file we open in /dev to talk to the slice,
 is optionally broken into 3 parts:
 
-	First you have the disk name.  Assume we have two SCSI
-	drives in our system, which gives us `sd0' and `sd1'.
+        First you have the disk name.  Assume we have two SCSI
+        drives in our system, which gives us `sd0' and `sd1'.
 
-	Next you have the "Slice" (or "Master Partition") number,
-	as seen in the Partition Editor.  Assume that our sd0 contains
-	two slices, a FreeBSD slice and a DOS slice.  This gives us
-	sd0s1 and sd0s2.  Let's also say that sd1 is completely devoted
-	to FreeBSD, so we have only one slice there: sd1s1.
+        Next you have the "Slice" (or "Master Partition") number,
+        as seen in the Partition Editor.  Assume that our sd0 contains
+        two slices, a FreeBSD slice and a DOS slice.  This gives us
+        sd0s1 and sd0s2.  Let's also say that sd1 is completely devoted
+        to FreeBSD, so we have only one slice there: sd1s1.
 
-	Next, if a slice is a FreeBSD slice, you have a number of
-	(confusingly named) "partitions" you can put inside of it.
-	These FreeBSD partitions are where various filesystems or swap
-	areas live, and using our hypothetical two-SCSI-disk machine
-	again, we might have something like the following layout on sd0:
+        Next, if a slice is a FreeBSD slice, you have a number of
+        (confusingly named) "partitions" you can put inside of it.
+        These FreeBSD partitions are where various filesystems or swap
+        areas live, and using our hypothetical two-SCSI-disk machine
+        again, we might have something like the following layout on sd0:
 
-		Name		Mountpoint
-		----		----------
-		sd0s1a		/
-		sd0s1b		<swap space>
-		sd0s1e		/usr
+                Name            Mountpoint
+                ----            ----------
+                sd0s1a          /
+                sd0s1b          <swap space>
+                sd0s1e          /usr
 
-	Because of historical convention, there is also a short-cut,
-	or "compatibility slice", that is maintained for easy access
-	to the first FreeBSD slice on a disk for those programs which
-	still don't know how to deal with the new slice scheme.
-	The compatibility slice names for our filesystem above would
-	look like:
+        Because of historical convention, there is also a short-cut,
+        or "compatibility slice", that is maintained for easy access
+        to the first FreeBSD slice on a disk for those programs which
+        still don't know how to deal with the new slice scheme.
+        The compatibility slice names for our filesystem above would
+        look like:
 
-		Name		Mountpoint
-		----		----------
-		sd0a		/
-		sd0b		<swap space>
-		sd0e		/usr
+                Name            Mountpoint
+                ----            ----------
+                sd0a            /
+                sd0b            <swap space>
+                sd0e            /usr
 
-	FreeBSD automatically maps the compatibility slice to the first
-	FreeBSD slice it finds (in this case, sd0s1).  You may have multiple
-	FreeBSD slices on a drive, but only the first one may be the
-	compatibility slice!
+        FreeBSD automatically maps the compatibility slice to the first
+        FreeBSD slice it finds (in this case, sd0s1).  You may have multiple
+        FreeBSD slices on a drive, but only the first one may be the
+        compatibility slice!
 
-	The compatibility slice will eventually be phased out, but
-	it is still important right now for several reasons:
+        The compatibility slice will eventually be phased out, but
+        it is still important right now for several reasons:
 
-		1. Some programs, as mentioned before, still don't work
-		   with the slice paradigm and need time to catch up.
+                1. Some programs, as mentioned before, still don't work
+                   with the slice paradigm and need time to catch up.
 
-		2. The FreeBSD boot blocks are unable to look for
-		   a root file system in anything but a compatibility
-		   slice right now.  This means that our root will always
-		   show up on "sd0a" in the above scenario, even though
-		   it really lives over on sd0s1a and would otherwise be
-		   referred to by its full slice name.
+                2. The FreeBSD boot blocks are unable to look for
+                   a root file system in anything but a compatibility
+                   slice right now.  This means that our root will always
+                   show up on "sd0a" in the above scenario, even though
+                   it really lives over on sd0s1a and would otherwise be
+                   referred to by its full slice name.
 
 Once you understand all this, then the label editor becomes fairly
 simple.  You're either carving up the FreeBSD slices displayed at the