diff options
author | Jim Harris <jimharris@FreeBSD.org> | 2012-01-31 19:38:18 +0000 |
---|---|---|
committer | Jim Harris <jimharris@FreeBSD.org> | 2012-01-31 19:38:18 +0000 |
commit | f11c7f63056671247335df83a3fe80b94c6616ac (patch) | |
tree | cb4ab69703685955650ec588ba9e9a9f80756563 /sys/dev/isci/scil/scic_remote_device.h | |
parent | db25e24c2f75db6edfb0d0b59f051ae30f62f5cd (diff) | |
download | src-f11c7f63056671247335df83a3fe80b94c6616ac.tar.gz src-f11c7f63056671247335df83a3fe80b94c6616ac.zip |
Notes
Diffstat (limited to 'sys/dev/isci/scil/scic_remote_device.h')
-rw-r--r-- | sys/dev/isci/scil/scic_remote_device.h | 442 |
1 files changed, 442 insertions, 0 deletions
diff --git a/sys/dev/isci/scil/scic_remote_device.h b/sys/dev/isci/scil/scic_remote_device.h new file mode 100644 index 000000000000..9abd04dbf748 --- /dev/null +++ b/sys/dev/isci/scil/scic_remote_device.h @@ -0,0 +1,442 @@ +/*- + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD$ + */ +#ifndef _SCIC_REMOTE_DEVICE_H_ +#define _SCIC_REMOTE_DEVICE_H_ + +/** + * @file + * + * @brief This file contains all of the interface methods that can be called + * by an SCIC user on the device object. + */ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +#include <dev/isci/scil/sci_types.h> +#include <dev/isci/scil/sci_status.h> +#include <dev/isci/scil/intel_sas.h> + + +/** + * @brief + */ +typedef enum SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE +{ + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED, + + SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX + +} SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_T; + +/** + * @brief This method simply returns the maximum memory space needed to + * store a remote device object. + * + * @return a positive integer value indicating the size (in bytes) of the + * remote device object. + */ +U32 scic_remote_device_get_object_size( + void +); + +/** + * @brief This method will perform the construction common to all + * remote device objects. + * + * @note It isn't necessary to call scic_remote_device_destruct() for + * device objects that have only called this method for construction. + * Once subsequent construction methods have been invoked (e.g. + * scic_remote_device_da_construct()), then destruction should occur. + * @note + * + * @param[in] port This parameter specifies the SAS/SATA Port handle + * corresponding to the port through which this device + * is to be accessed. + * @param[in] remote_device_memory This parameter specifies the memory + * location to be used by the SCIC implementation to store the + * SCIC REMOTE DEVICE. + * @param[out] new_remote_device_handle An opaque remote device handle to + * be used by the SCIC user for all subsequent remote device + * operations. + * + * @return none + */ +void scic_remote_device_construct( + SCI_PORT_HANDLE_T port, + void * remote_device_memory, + SCI_REMOTE_DEVICE_HANDLE_T * new_remote_device_handle +); + +/** + * @brief This method will construct a SCIC_REMOTE_DEVICE object for a + * direct attached (da) device. The information (e.g. IAF, Signature + * FIS, etc.) necessary to build the device is known to the SCI Core + * since it is contained in the scic_phy object. + * + * @pre The user must have previously called scic_remote_device_construct() + * + * @note Remote device objects are a limited resource. As such, they + * must be protected. Thus calls to construct and destruct are + * mutually exclusive and non-reentrant. + * + * @param[in] remote_device This parameter specifies the remote device to be + * destructed. + * + * @return Indicate if the remote device was successfully constructed. + * @retval SCI_SUCCESS Returned if the device was successfully constructed. + * @retval SCI_FAILURE_DEVICE_EXISTS Returned if the device has already + * been constructed. If it's an additional phy for the target, then + * call scic_remote_device_da_add_phy(). + * @retval SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned if the supplied + * parameters necessitate creation of a remote device for which + * the protocol is not supported by the underlying controller + * hardware. + * @retval SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if + * the core controller associated with the supplied parameters + * is unable to support additional remote devices. + */ +SCI_STATUS scic_remote_device_da_construct( + SCI_REMOTE_DEVICE_HANDLE_T remote_device +); + +/** + * @brief This method will construct an SCIC_REMOTE_DEVICE object for an + * expander attached (ea) device from an SMP Discover Response. + * + * @pre The user must have previously called scic_remote_device_construct() + * + * @note Remote device objects are a limited resource. As such, they + * must be protected. Thus calls to construct and destruct are + * mutually exclusive and non-reentrant. + * + * @param[in] remote_device This parameter specifies the remote device to be + * destructed. + * @param[in] discover_response This parameter specifies the SMP + * Discovery Response to be used in device creation. + * + * @return Indicate if the remote device was successfully constructed. + * @retval SCI_SUCCESS Returned if the device was successfully constructed. + * @retval SCI_FAILURE_DEVICE_EXISTS Returned if the device has already + * been constructed. If it's an additional phy for the target, then + * call scic_ea_remote_device_add_phy(). + * @retval SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned if the supplied + * parameters necessitate creation of a remote device for which + * the protocol is not supported by the underlying controller + * hardware. + * @retval SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if + * the core controller associated with the supplied parameters + * is unable to support additional remote devices. + */ +SCI_STATUS scic_remote_device_ea_construct( + SCI_REMOTE_DEVICE_HANDLE_T remote_device, + SMP_RESPONSE_DISCOVER_T * discover_response +); + +/** + * @brief This method is utilized to free up a core's remote device object. + * + * @note Remote device objects are a limited resource. As such, they + * must be protected. Thus calls to construct and destruct are + * mutually exclusive and non-reentrant. + * + * @param[in] remote_device This parameter specifies the remote device to be + * destructed. + * + * @return The return value shall indicate if the device was successfully + * destructed or if some failure occurred. + * @retval SCI_STATUS This value is returned if the device is successfully + * destructed. + * @retval SCI_FAILURE_INVALID_REMOTE_DEVICE This value is returned if the + * supplied device isn't valid (e.g. it's already been destoryed, + * the handle isn't valid, etc.). + */ +SCI_STATUS scic_remote_device_destruct( + SCI_REMOTE_DEVICE_HANDLE_T remote_device +); + +#if !defined(DISABLE_WIDE_PORTED_TARGETS) +/** + * @brief This method will attempt to set port width for a remote device. + * + * @param[in] remote_device This parameter specifies the remote device + * object for which to set new port width. + * @param[in] new_port_width The new port width to update. + * + * @return Indicate if the device port width was successfully updated. + * @retval SCI_SUCCESS This value is returned when port width update was successful. + * @retval SCI_FAILURE The port width update failed. + */ +SCI_STATUS scic_remote_device_set_port_width( + SCI_REMOTE_DEVICE_HANDLE_T remote_device, + U8 new_port_width +); + +/** + * @brief This method retrieve the SCIC's record of a remote device's port width. + * + * @param[in] remote_device This parameter specifies the remote device + * object for which to retrieve the port width value. + * + * @return The SCIC's record of a remote device's port width + */ +U8 scic_remote_device_get_port_width( + SCI_REMOTE_DEVICE_HANDLE_T remote_device +); + +#define scic_remote_device_da_add_phy(device, phy) SCI_FAILURE +#define scic_remote_device_ea_add_phy(device, response) SCI_FAILURE +#define scic_remote_device_remove_phy(device) SCI_FAILURE + +#else // !defined(DISABLE_WIDE_PORTED_TARGETS) + +#define scic_remote_device_set_port_width(device, port_width) SCI_FAILURE +#define scic_remote_device_get_port_width(device) (1) + +#define scic_remote_device_da_add_phy(device, phy) SCI_FAILURE +#define scic_remote_device_ea_add_phy(device, response) SCI_FAILURE +#define scic_remote_device_remove_phy(device) SCI_FAILURE + +#endif // !defined(DISABLE_WIDE_PORTED_TARGETS) + +/** + * @brief This method will start the supplied remote device. This method + * enables normal IO requests to flow through to the remote device. + * + * @param[in] remote_device This parameter specifies the device to be + * started. + * @param[in] timeout This parameter specifies the number of milliseconds + * in which the start operation should complete. + * + * @return An indication of whether the device was successfully started. + * @retval SCI_SUCCESS This value is returned if the device was successfully + * started. + * @retval SCI_FAILURE_INVALID_PHY This value is returned if the user attempts + * to start the device when there have been no phys added to it. + */ +SCI_STATUS scic_remote_device_start( + SCI_REMOTE_DEVICE_HANDLE_T remote_device, + U32 timeout +); + +/** + * @brief This method will stop both transmission and reception of link + * activity for the supplied remote device. This method disables + * normal IO requests from flowing through to the remote device. + * + * @param[in] remote_device This parameter specifies the device to be + * stopped. + * @param[in] timeout This parameter specifies the number of milliseconds + * in which the stop operation should complete. + * + * @return An indication of whether the device was successfully stopped. + * @retval SCI_SUCCESS This value is returned if the transmission and reception + * for the device was successfully stopped. + */ +SCI_STATUS scic_remote_device_stop( + SCI_REMOTE_DEVICE_HANDLE_T remote_device, + U32 timeout +); + +/** + * @brief This method will reset the device making it ready for operation. + * This method must be called anytime the device is reset either + * through a SMP phy control or a port hard reset request. + * + * @note This method does not actually cause the device hardware to be reset. + * This method resets the software object so that it will be operational + * after a device hardware reset completes. + * + * @param[in] remote_device This parameter specifies the device to be + * reset. + * + * @return An indication of whether the device reset was accepted. + * @retval SCI_SUCCESS This value is returned if the device reset is started. + */ +SCI_STATUS scic_remote_device_reset( + SCI_REMOTE_DEVICE_HANDLE_T remote_device +); + +/** + * @brief This method informs the device object that the reset operation is + * complete and the device can resume operation again. + * + * @param[in] remote_device This parameter specifies the device which is to + * be informed of the reset complete operation. + * + * @return An indication that the device is resuming operation. + * @retval SCI_SUCCESS the device is resuming operation. + */ +SCI_STATUS scic_remote_device_reset_complete( + SCI_REMOTE_DEVICE_HANDLE_T remote_device +); + +/** + * @brief This method returns the suggested target reset timeout. SAS and + * SATA devices have different timeout values in milliseconds for + * target reset operations. + * + * @param[in] remote_device This parameter specifies the device which is to + * be informed of the reset complete operation. + * + * @return The suggested reset timeout value for the specified target device + * in milliseconds. + */ +U32 scic_remote_device_get_suggested_reset_timeout( + SCI_REMOTE_DEVICE_HANDLE_T remote_device +); + +/** + * @brief This method will set the maximum link speed to be utilized + * when connections are established for the supplied remote device. + * + * @pre The remote device must previously have been stopped for this + * call to succeed. + * + * @param[in] remote_device This parameter specifies the device for which + * to set the maximum connection rate. + * @param[in] connection_rate This parameter specifies the maximum link rate + * to be utilized for all connections to the supplied remote + * device. + * + * @return An indication as to whether the connection rate was successfully + * updated. + * @retval SCI_SUCCESS This value is returned if the connection rate was + * successfully updated. + * @retval SCI_FAILURE_INVALID_STATE This value is returned if the remote + * device is not in a stopped state or some other state that allows + * for a maximum connection rate change. + */ +SCI_STATUS scic_remote_device_set_max_connection_rate( + SCI_REMOTE_DEVICE_HANDLE_T remote_device, + SCI_SAS_LINK_RATE connection_rate +); + +/** + * @brief This method simply returns the link rate at which communications + * to the remote device occur. + * + * @param[in] remote_device This parameter specifies the device for which + * to get the connection rate. + * + * @return Return the link rate at which we transfer for the supplied + * remote device. + */ +SCI_SAS_LINK_RATE scic_remote_device_get_connection_rate( + SCI_REMOTE_DEVICE_HANDLE_T remote_device +); + +/** + * @brief This method will indicate which protocols are supported by this + * remote device. + * + * @param[in] remote_device This parameter specifies the device for which + * to return the protocol. + * @param[out] protocols This parameter specifies the output values, from + * the remote device object, which indicate the protocols + * supported by the supplied remote_device. + * + * @return The type of protocols supported by this device. The values are + * returned as part of a bit mask in order to allow for multi-protocol + * support. + */ +void scic_remote_device_get_protocols( + SCI_REMOTE_DEVICE_HANDLE_T remote_device, + SMP_DISCOVER_RESPONSE_PROTOCOLS_T * protocols +); + +/** + * @brief This method will indicate the SAS address for the remote device. + * + * @param[in] remote_device This parameter specifies the device for which + * to return the SAS address. + * @param[out] sas_address This parameter specifies a pointer to a SAS + * address structure into which the core will copy the SAS + * address for the remote device. + * + * @return none + */ +void scic_remote_device_get_sas_address( + SCI_REMOTE_DEVICE_HANDLE_T remote_device, + SCI_SAS_ADDRESS_T * sas_address +); + +#if !defined(DISABLE_ATAPI) +/** + * This method first decide whether a device is a stp target, then + * decode the signature fis of a DA STP device to tell whether it + * is a standard end disk or an ATAPI device. + * + * @param[in] this_device The device whose type is to be decided. + * + * @return BOOL Indicate a device is ATAPI device or not. + */ +BOOL scic_remote_device_is_atapi( + SCI_REMOTE_DEVICE_HANDLE_T device_handle +); +#else // !defined(DISABLE_ATAPI) +#define scic_remote_device_is_atapi(device_handle) FALSE +#endif // !defined(DISABLE_ATAPI) + +#ifdef __cplusplus +} +#endif // __cplusplus + +#endif // _SCIC_REMOTE_DEVICE_H_ + |