1 files changed, 0 insertions, 50 deletions

diff --git a/sys/dev/mlx5/mlx5_en/mlx5_en_main.c b/sys/dev/mlx5/mlx5_en/mlx5_en_main.c
index 9bcb0dcf8e16..fb8b79c8f787 100644
--- a/sys/dev/mlx5/mlx5_en/mlx5_en_main.c
+++ b/sys/dev/mlx5/mlx5_en/mlx5_en_main.c
@@ -1135,25 +1135,6 @@ mlx5e_hw_clock(struct mlx5e_priv *priv)
 }
 
 /*
- * Seed the first calibration point so that base_prev and clbr_hw_prev
- * are always valid.  Called once during attach before the first
- * calibration callout fires.
- */
-static void
-mlx5e_seed_calibration(struct mlx5e_priv *priv)
-{
-	struct mlx5e_clbr_point *cp;
-	struct timespec ts;
-
-	cp = &priv->clbr_points[0];
-	cp->clbr_hw_curr = mlx5e_hw_clock(priv);
-	nanouptime(&ts);
-	cp->base_curr = mlx5e_timespec2usec(&ts);
-	cp->clbr_hw_prev = cp->clbr_hw_curr - 1;
-	cp->base_prev = cp->base_curr - 1;
-}
-
-/*
  * The calibration callout, it runs either in the context of the
  * thread which enables calibration, or in callout.  It takes the
  * snapshot of system and adapter clocks, then advances the pointers to
@@ -1166,9 +1147,6 @@ mlx5e_calibration_callout(void *arg)
 	struct mlx5e_priv *priv;
 	struct mlx5e_clbr_point *next, *curr;
 	struct timespec ts;
-	uint64_t hw_delta_new, hw_delta_old;
-	uint64_t old_nsec, old_projected, old_sec;
-	uint64_t res_n, res_s, res_s_mod, rt_delta_old;
 	int clbr_curr_next;
 
 	priv = arg;
@@ -1197,33 +1175,6 @@ mlx5e_calibration_callout(void *arg)
 	nanouptime(&ts);
 	next->base_curr = mlx5e_timespec2usec(&ts);
 
-	/*
-	 * Ensure monotonicity across calibration transitions.  Compute
-	 * what the old calibration would extrapolate to at the new
-	 * hw_curr.  If the new base_curr is less, clamp it so the new
-	 * slope is at least as steep as the old one.  This prevents
-	 * packets from seeing time go backwards when the slope drops.
-	 *
-	 * Use the same split-seconds technique as mlx5e_mbuf_tstmp()
-	 * to avoid overflowing uint64_t in the multiplication.
-	 */
-	hw_delta_new = next->clbr_hw_curr - curr->clbr_hw_curr;
-	rt_delta_old = curr->base_curr - curr->base_prev;
-	hw_delta_old = curr->clbr_hw_curr - curr->clbr_hw_prev;
-	old_sec = hw_delta_new / priv->cclk;
-	old_nsec = hw_delta_new % priv->cclk;
-	res_s = old_sec * rt_delta_old;
-	res_n = old_nsec * rt_delta_old;
-	res_s_mod = res_s % hw_delta_old;
-	res_s /= hw_delta_old;
-	res_s_mod *= priv->cclk;
-	res_n += res_s_mod;
-	res_n /= hw_delta_old;
-	res_s *= priv->cclk;
-	old_projected = curr->base_curr + res_s + res_n;
-	if (next->base_curr < old_projected)
-		next->base_curr = old_projected;
-
 	curr->clbr_gen = 0;
 	atomic_thread_fence_rel();
 	priv->clbr_curr = clbr_curr_next;
@@ -4936,7 +4887,6 @@ mlx5e_create_ifp(struct mlx5_core_dev *mdev)
 	callout_init(&priv->tstmp_clbr, 1);
 	/* Pull out the frequency of the clock in hz */
 	priv->cclk = (uint64_t)MLX5_CAP_GEN(mdev, device_frequency_khz) * 1000ULL;
-	mlx5e_seed_calibration(priv);
 	mlx5e_reset_calibration_callout(priv);
 
 	pa.pa_version = PFIL_VERSION;