1 files changed, 0 insertions, 246 deletions

diff --git a/sys/pc98/conf/SMP-GENERIC98 b/sys/pc98/conf/SMP-GENERIC98
deleted file mode 100644
index 41363f7f65fb..000000000000
--- a/sys/pc98/conf/SMP-GENERIC98
+++ /dev/null
@@ -1,246 +0,0 @@
-#
-# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
-#
-# For more information read the handbook part System Administration -> 
-# Configuring the FreeBSD Kernel -> The Configuration File. 
-# The handbook is available in /usr/share/doc/handbook or online as
-# latest version from the FreeBSD World Wide Web server 
-# <URL:http://www.FreeBSD.ORG/>
-#
-# An exhaustive list of options and more detailed explanations of the 
-# device lines is present in the ./LINT configuration file. If you are 
-# in doubt as to the purpose or necessity of a line, check first in LINT.
-#
-#	$Id: SMP-GENERIC98,v 1.11 1998/11/03 22:01:22 des Exp $
-
-# GENERIC98 -- Generic PC98 machine with WD/SCSI disks
-
-machine		"pc98"
-# SMP does NOT support 386/486 CPUs.
-#cpu		"I386_CPU"
-#cpu		"I486_CPU"
-cpu		"I586_CPU"
-cpu		"I686_CPU"
-ident		"SMP-GENERIC98"
-maxusers	32
-
-# Create a SMP capable kernel (mandatory options):
-options		SMP			# Symmetric MultiProcessor Kernel
-options		APIC_IO			# Symmetric (APIC) I/O
-
-# Optional, these are the defaults:
-#options		NCPU=2			# number of CPUs
-#options		NBUS=4			# number of busses
-#options		NAPIC=1			# number of IO APICs
-#options		NINTR=24		# number of INTs
-
-options		"PC98"			#PC98
-# SMP shouldn't need x87 emulation, disable by default.
-#options		MATH_EMULATE		#Support for x87 emulation
-options		INET			#InterNETworking
-options		FFS			#Berkeley Fast Filesystem
-options		FFS_ROOT		#FFS usable as root device [keep this!]
-options		MFS			#Memory Filesystem
-options		MFS_ROOT		#MFS usable as root device, "MFS" req'ed
-options		NFS			#Network Filesystem
-options		NFS_ROOT		#NFS usable as root device, "NFS" req'ed
-options		MSDOSFS			#MSDOS Filesystem
-options		"CD9660"		#ISO 9660 Filesystem
-options		"CD9660_ROOT"		#CD-ROM usable as root device
-options		FFS_ROOT		#FFS usable as root device [keep this!]
-options		NFS_ROOT		#NFS usable as root device
-options		PROCFS			#Process filesystem
-options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
-options		SCSI_DELAY=15000	#Be pessimistic about Joe SCSI device
-options		UCONSOLE		#Allow users to grab the console
-options		"LINE30"
-options		FAILSAFE		#Be conservative
-options		USERCONFIG		#boot -c editor
-options		VISUAL_USERCONFIG	#visual boot -c editor
-
-options		SYSVSHM			
-options		SYSVSEM
-options		SYSVMSG
-
-options		COM_MULTIPORT
-
-#
-#	IBM-PC HDD support
-#options	COMPAT_ATDISK
-#
-#	FreeBSD(98)-current is a *TEST VERSION*.  
-#	It is highly recomended to compile with following options, and to
-#	record the panic messages and the result of trace command brefore 
-#	reporting a problem.
-options		DDB
-options		DIAGNOSTIC
-
-config		kernel	root on wd0
-
-controller	isa0
-controller	pci0
-
-controller	fdc0	at isa? port "IO_FD1" bio irq 11 drq 2
-disk		fd0	at fdc0 drive 0
-disk		fd1	at fdc0 drive 1
-disk		fd2	at fdc0 drive 2
-disk		fd3	at fdc0 drive 3
-# Unless you know very well what you're doing, leave ft0 at drive 2, or
-# remove the line entirely if you don't need it.  Trying to configure
-# it on another unit might cause surprises, see PR kern/7176.
-tape		ft0	at fdc0 drive 4
-
-# options		"CMD640"	# work around CMD640 chip deficiency
-controller	wdc0	at isa? port "IO_WD1" bio irq 9
-disk		wd0	at wdc0 drive 0
-#disk		wd1	at wdc0 drive 1
-#disk		wd2	at wdc0 drive 2
-#disk		wd3	at wdc0 drive 3
-
-options		ATAPI	# Enable ATAPI support for IDE bus
-options		ATAPI_STATIC	#Don't do it as an LKM
-device		wcd0		#IDE CD-ROM
-device		wfd0		#IDE Floppy (e.g. LS-120)
-
-# A single entry for any of these controllers (ncr, ahb, ahc) is sufficient
-# for any number of installed devices.
-controller	ncr0
-#controller	amd0
-controller	ahc0
-controller	isp0
-
-
-#
-# SMP does not support bs driver: see /sys/i386/isa/bs/bsif.h
-#
-# WD33C93 SCSI card (55/92 like board)
-#
-
-options	BS_TARG_SAFEMODE
-
-# PC-9801-92
-#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0
-# SC-98
-# controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x10000
-# HA-55BS2 and later
-#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x20000
-# ELECOM type
-#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x30000
-# SMIT
-#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000
-# Logitec LHA-20x
-#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x50000
-
-#controller	aic0	at isa? port 0x1840 bio irq 5 flags 0x10000
-
-controller	scbus0
-
-device		da0
-
-device		sa0
-
-device		pass0
-
-device		cd0	#Only need one of these, the code dynamically grows
-
-controller	matcd0	at isa? port? bio
-
-# syscons is the default console driver, resembling an SCO console
-device		sc0	at isa? port IO_KBD tty irq 1
-#options		XSERVER			# support for X server
-
-device		npx0	at isa? port IO_NPX irq 8
-
-#
-# Laptop support (see LINT for more options)
-#
-device		apm0    at isa?	disable	flags 0x31 # Advanced Power Management
-
-# PCCARD (PCMCIA) support
-#controller	card0
-#device		pcic0	at card?
-#device		pcic1	at card?
-
-device		sio0	at isa? port "IO_COM1" tty irq 4
-device		sio1	at isa? port 0xd2  tty irq 5 flags 0x101
-device		sio2	at isa? port 0x8d2 tty flags 0x101
-
-device		lpt0	at isa? port IO_LPT  tty
-device		mse0	at isa? port IO_MSE tty irq 13
-
-# Order is important here due to intrusive probes, do *not* alphabetize
-# this list of network interfaces until the probes have been fixed.
-# Right now it appears that the ie0 must be probed before ep0. See
-# revision 1.20 of this file.
-device de0
-device fxp0
-device mx0
-device pn0
-device rl0
-device tl0
-device tx0
-device vr0
-device vx0
-device wb0
-device xl0
-
-#
-# DP8390 NIC
-#
-# ed0: generic driver
-# ed1: LANEED LD-BDN
-# ed2: EGY-98
-# ed3: LGY-98
-# ed4: ICM-IF-2766/EN-2298-T
-# ed5: SIC-98
-# ed6: PC-9801-108
-# ed7: LA-98
-# ed8: C-NET(98)
-# ed9: C-NET(98)E/L
-#
-device ed0 at isa? port 0x00d0 net irq 6
-device ed1 at isa? port 0x00d8 net irq 6 flags 0x200000
-device ed2 at isa? port 0x00d8 net irq 6 flags 0x300000
-device ed3 at isa? port 0x00d0 net irq 6 flags 0x400000
-device ed4 at isa? port 0x56d0 net irq 5 flags 0x500000
-device ed5 at isa? port 0x00d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000
-device ed6 at isa? port 0x0770 net irq 6 flags 0x800000
-device ed7 at isa? port 0x00d0 net irq 6 flags 0x900000
-device ed8 at isa? port 0x03d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000
-device ed9 at isa? port 0x03d0 net irq 6 flags 0xb00000
-
-device ep0 at isa? port 0x40d0 net irq 3
-device fe0 at isa? port 0x00d0 net irq 3
-device lnc0 at isa? port 0x03d0 net irq 6
-device zp0 at isa? port 0x00d0 net irq 10 iomem 0xe0000
-
-#controller	snd0
-#device	sb0	at isa? port 0x20d2 irq 10 conflicts drq 3
-#device	sbxvi0 	at isa? drq 3
-#device	sbmidi0	at isa? port 0x80d2
-#device	opl0	at isa? port 0x28d2
-#device pcm0    at isa? port 0xa460 irq 12
-#device	mss0	at isa? port 0xf40 irq 12 drq 1
-
-pseudo-device	loop
-pseudo-device	ether
-pseudo-device	sl	1
-#pseudo-device	ppp	1
-pseudo-device	tun	1
-pseudo-device	pty	16
-pseudo-device	gzip		# Exec gzipped a.out's
-
-# KTRACE enables the system-call tracing facility ktrace(2).
-# This adds 4 KB bloat to your kernel, and slightly increases
-# the costs of each syscall.
-options		KTRACE		#kernel tracing
-
-# This provides support for System V shared memory.
-#
-options		SYSVSHM
-
-#  The `bpfilter' pseudo-device enables the Berkeley Packet Filter.  Be
-#  aware of the legal and administrative consequences of enabling this
-#  option.  The number of devices determines the maximum number of
-#  simultaneous BPF clients programs runnable.
-#pseudo-device	bpfilter 4	#Berkeley packet filter