2 files changed, 153 insertions, 40 deletions

diff --git a/usr.bin/bluetooth/rfcomm_sppd/rfcomm_sppd.1 b/usr.bin/bluetooth/rfcomm_sppd/rfcomm_sppd.1
index 2f7d3f5328a1..4af70943f6df 100644
--- a/usr.bin/bluetooth/rfcomm_sppd/rfcomm_sppd.1
+++ b/usr.bin/bluetooth/rfcomm_sppd/rfcomm_sppd.1
@@ -25,7 +25,7 @@
 .\" $Id: rfcomm_sppd.1,v 1.3 2003/09/07 18:15:55 max Exp $
 .\" $FreeBSD$
 .\"
-.Dd April 26, 2003
+.Dd January 24, 2007
 .Dt RFCOMM_SPPD 1
 .Os
 .Sh NAME
@@ -33,7 +33,7 @@
 .Nd RFCOMM Serial Port Profile daemon
 .Sh SYNOPSIS
 .Nm
-.Op Fl bh
+.Op Fl bhS
 .Fl a Ar address
 .Fl c Ar channel
 .Op Fl t Ar tty
@@ -41,7 +41,11 @@
 The
 .Nm
 utility is a Serial Port Profile daemon.
-It opens RFCOMM connection to the specified
+It can operate in two modes: client and server.
+.Pp
+In client mode,
+.Nm
+opens RFCOMM connection to the specified
 .Ar address
 server and
 .Ar channel .
@@ -54,6 +58,27 @@ interface if
 .Fl t
 option was specified.
 .Pp
+If the
+.Fl S
+option is specified,
+.Nm
+will operate in server mode and act as RFCOMM server,
+listening on
+.Dv ANY
+address and advertising a virtual serial port
+via the
+.Xr sdpd 8
+daemon.
+The
+.Fl t
+option must be specified;
+the server side of the virtual serial port is attached to the pseudo-terminal
+.Ar tty .
+.Nm
+should be run as root in order to communicate with
+.Xr sdp 8
+in this case.
+.Pp
 The
 .Nm
 utility opens both master and slave pseudo terminals.
@@ -71,17 +96,31 @@ port.
 The options are as follows:
 .Bl -tag -width indent
 .It Fl a Ar address
-This required option specifies the address of the remote RFCOMM server.
+In client mode,
+this required option specifies the address of the remote RFCOMM server.
+If this option is specified in server mode,
+.Nm
+will only accept connections from the
+.Tn Bluetooth
+device with address
+.Ar address .
 The address can be specified as BD_ADDR or name.
-If name was specified then the
+If name was specified then
 .Nm
 utility will attempt to resolve the name via
 .Xr bt_gethostbyname 3 .
 .It Fl b
 Detach from the controlling terminal, i.e., run in background.
 .It Fl c Ar channel
-This option specifies RFCOMM channel to connect to.
-RFCOMM channel could either be a number between 1 and 30 or a service name.
+In both client and server mode,
+this required option specifies the RFCOMM channel to connect to or listen on.
+In server mode,
+the channel should be a number between 1 and 30.
+If not specified,
+.Nm
+will try to allocate RFCOMM channel number based on process ID.
+In client mode,
+the channel could either be a number between 1 and 30 or a service name.
 Supported service names are:
 .Cm DUN
 (for DialUp Networking service),
@@ -97,11 +136,16 @@ utility will try to obtain RFCOMM channel for Serial Port service via Service
 Discovery Protocol from the server.
 .It Fl h
 Display usage message and exit.
+.It Fl S
+Server mode; see
+.Sx DESCRIPTION .
 .It Fl t Ar tty
 Slave pseudo tty name.
 If not set stdin/stdout will be used.
 This option is required if
 .Fl b
+or
+.Fl S
 option was specified.
 .El
 .Sh FILES
@@ -129,7 +173,8 @@ can be used to talk to the remote serial port on the server.
 .Xr bluetooth 3 ,
 .Xr ng_btsocket 4 ,
 .Xr pty 4 ,
-.Xr rfcomm_pppd 8
+.Xr rfcomm_pppd 8 ,
+.Xr sdpd 8
 .Sh AUTHORS
 .An Maksim Yevmenkin Aq m_evmenkin@yahoo.com
 .Sh BUGS
diff --git a/usr.bin/bluetooth/rfcomm_sppd/rfcomm_sppd.c b/usr.bin/bluetooth/rfcomm_sppd/rfcomm_sppd.c
index 4ce893da22c5..4c37d5f073e4 100644
--- a/usr.bin/bluetooth/rfcomm_sppd/rfcomm_sppd.c
+++ b/usr.bin/bluetooth/rfcomm_sppd/rfcomm_sppd.c
@@ -72,16 +72,17 @@ main(int argc, char *argv[])
 	struct sockaddr_rfcomm	 ra;
 	bdaddr_t		 addr;
 	int			 n, background, channel, service,
-				 s, amaster, aslave, fd;
+				 s, amaster, aslave, fd, doserver;
 	fd_set			 rfd;
 	char			*tty = NULL, *ep = NULL, buf[SPPD_BUFFER_SIZE];
 
 	memcpy(&addr, NG_HCI_BDADDR_ANY, sizeof(addr));
 	background = channel = 0;
 	service = SDP_SERVICE_CLASS_SERIAL_PORT;
+	doserver = 0;
 
 	/* Parse command line options */
-	while ((n = getopt(argc, argv, "a:bc:t:h")) != -1) {
+	while ((n = getopt(argc, argv, "a:bc:t:hS")) != -1) {
 		switch (n) { 
 		case 'a': /* BDADDR */
 			if (!bt_aton(optarg, &addr)) {
@@ -134,6 +135,10 @@ main(int argc, char *argv[])
 				tty = optarg;
 			break;
 
+		case 'S':
+			doserver = 1;
+			break;
+
 		case 'h':
 		default:
 			usage();
@@ -142,7 +147,7 @@ main(int argc, char *argv[])
 	}
 
 	/* Check if we have everything we need */
-	if (memcmp(&addr, NG_HCI_BDADDR_ANY, sizeof(addr)) == 0)
+	if (!doserver && memcmp(&addr, NG_HCI_BDADDR_ANY, sizeof(addr)) == 0)
 		usage();
 		/* NOT REACHED */
 
@@ -165,17 +170,9 @@ main(int argc, char *argv[])
 	if (sigaction(SIGCHLD, &sa, NULL) < 0)
 		err(1, "Could not sigaction(SIGCHLD)");
 
-	/* Check channel, if was not set then obtain it via SDP */
-	if (channel == 0 && service != 0)
-		if (rfcomm_channel_lookup(NULL, &addr,
-			    service, &channel, &n) != 0)
-			errc(1, n, "Could not obtain RFCOMM channel");
-	if (channel <= 0 || channel > 30)
-		errx(1, "Invalid RFCOMM channel number %d", channel);
-
 	/* Open TTYs */
 	if (tty == NULL) {
-		if (background)
+		if (background || doserver)
 			usage();
 
 		amaster = STDIN_FILENO;
@@ -187,24 +184,95 @@ main(int argc, char *argv[])
 		fd = amaster;
 	}		
 
-
 	/* Open RFCOMM connection */
-	memset(&ra, 0, sizeof(ra));
-	ra.rfcomm_len = sizeof(ra);
-	ra.rfcomm_family = AF_BLUETOOTH;
 
-	s = socket(PF_BLUETOOTH, SOCK_STREAM, BLUETOOTH_PROTO_RFCOMM);
-	if (s < 0)
-		err(1, "Could not create socket");
-
-	if (bind(s, (struct sockaddr *) &ra, sizeof(ra)) < 0)
-		err(1, "Could not bind socket");
-
-	memcpy(&ra.rfcomm_bdaddr, &addr, sizeof(ra.rfcomm_bdaddr));
-	ra.rfcomm_channel = channel;
+	if (doserver) {
+		struct sockaddr_rfcomm	 ma;
+		bdaddr_t		 bt_addr_any;
+		sdp_lan_profile_t	 lan;
+		void			*ss;
+		uint32_t		 sdp_handle;
+		int			 acceptsock, aaddrlen;
+
+		if (channel == 0) {
+			/* XXX: should check if selected channel is unused */
+			channel = (getpid() % 30) + 1;
+		}
+		acceptsock = socket(PF_BLUETOOTH, SOCK_STREAM,
+		    BLUETOOTH_PROTO_RFCOMM);
+		if (acceptsock < 0)
+			err(1, "Could not create socket");
+
+		memset(&ma, 0, sizeof(ma));
+		ma.rfcomm_len = sizeof(ma);
+		ma.rfcomm_family = AF_BLUETOOTH;
+		ma.rfcomm_channel = channel;
+
+		if (bind(acceptsock, (struct sockaddr *)&ma, sizeof(ma)) < 0)
+			err(1, "Could not bind socket -- channel %d in use?",
+			    channel);
+		listen(acceptsock, 10);
+
+		ss = sdp_open_local(NULL);
+		if (ss == NULL)
+			errx(1, "Unable to create local SDP session");
+		if (sdp_error(ss) != 0)
+			errx(1, "Unable to open local SDP session. %s (%d)",
+			    strerror(sdp_error(ss)), sdp_error(ss));
+		memset(&lan, 0, sizeof(lan));
+		lan.server_channel = channel;
+
+		memcpy(&bt_addr_any, NG_HCI_BDADDR_ANY, sizeof(bt_addr_any));
+		if (sdp_register_service(ss, service, &bt_addr_any,
+		    (void *)&lan, sizeof(lan), &sdp_handle) != 0) {
+			errx(1, "Unable to register LAN service with "
+			    "local SDP daemon. %s (%d)",
+			    strerror(sdp_error(ss)), sdp_error(ss));
+		}
 
-	if (connect(s, (struct sockaddr *) &ra, sizeof(ra)) < 0)
-		err(1, "Could not connect socket");
+		s = -1;
+		while (s < 0) {
+			aaddrlen = sizeof(ra);
+			s = accept(acceptsock, (struct sockaddr *)&ra,
+			    &aaddrlen);
+			if (s < 0)
+				err(1, "Unable to accept()");
+			if (memcmp(&addr, NG_HCI_BDADDR_ANY, sizeof(addr)) &&
+			    memcmp(&addr, &ra.rfcomm_bdaddr, sizeof(addr))) {
+				warnx("Connect from wrong client");
+				close(s);
+				s = -1;
+			}
+		}
+		sdp_unregister_service(ss, sdp_handle);
+		sdp_close(ss);
+		close(acceptsock);
+	} else {
+		/* Check channel, if was not set then obtain it via SDP */
+		if (channel == 0 && service != 0)
+			if (rfcomm_channel_lookup(NULL, &addr,
+				    service, &channel, &n) != 0)
+				errc(1, n, "Could not obtain RFCOMM channel");
+		if (channel <= 0 || channel > 30)
+			errx(1, "Invalid RFCOMM channel number %d", channel);
+
+		s = socket(PF_BLUETOOTH, SOCK_STREAM, BLUETOOTH_PROTO_RFCOMM);
+		if (s < 0)
+			err(1, "Could not create socket");
+
+		memset(&ra, 0, sizeof(ra));
+		ra.rfcomm_len = sizeof(ra);
+		ra.rfcomm_family = AF_BLUETOOTH;
+
+		if (bind(s, (struct sockaddr *) &ra, sizeof(ra)) < 0)
+			err(1, "Could not bind socket");
+
+		memcpy(&ra.rfcomm_bdaddr, &addr, sizeof(ra.rfcomm_bdaddr));
+		ra.rfcomm_channel = channel;
+
+		if (connect(s, (struct sockaddr *) &ra, sizeof(ra)) < 0)
+			err(1, "Could not connect socket");
+	}
 
 	/* Became daemon if required */
 	if (background) {
@@ -346,7 +414,7 @@ sppd_ttys_open(char const *tty, int *amaster, int *aslave)
 		ttygid = -1;
 
 	(void) chown(tty, getuid(), ttygid);
-	(void) chmod(tty, S_IRUSR|S_IWUSR|S_IWGRP);
+	(void) chmod(tty, S_IRUSR|S_IWUSR|S_IRGRP|S_IWGRP);
 	(void) revoke(tty);
 
 	if ((*aslave = open(tty, O_RDWR, 0)) < 0) {
@@ -433,12 +501,12 @@ usage(void)
 	fprintf(stdout,
 "Usage: %s options\n" \
 "Where options are:\n" \
-"\t-a address Address to connect to (required)\n" \
+"\t-a address Peer address (required in client mode)\n" \
 "\t-b         Run in background\n" \
-"\t-c channel RFCOMM channel to connect to\n" \
-"\t-t tty     TTY name (required in background mode)\n" \
+"\t-c channel RFCOMM channel to connect to or listen on\n" \
+"\t-t tty     TTY name (required in background or server mode)\n" \
+"\t-S         Server mode\n" \
 "\t-h         Display this message\n", SPPD_IDENT);
-
 	exit(255);
 } /* usage */