diff options
| -rw-r--r-- | sys/conf/NOTES | 60 | ||||
| -rw-r--r-- | sys/i386/conf/NOTES | 60 |
2 files changed, 4 insertions, 116 deletions
diff --git a/sys/conf/NOTES b/sys/conf/NOTES index b61d27d8687e..2244571d1c4e 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -1868,69 +1868,13 @@ options COMPAT_OLDPCI #Use PCI shims and glue for old drivers device ahc # AHA2940 and onboard AIC7xxx devices device amd # AMD 53C974 (Teckram DC-390(T)) device isp # Qlogic family +device ispfw # Firmware Module for Qlogic family device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets) -# -# Options for ISP -# -# SCSI_ISP_NO_FWLOAD_MASK - mask of isp unit numbers (obviously -# a max of 32) that you wish to disable -# to disable the loading of firmware on. -# SCSI_ISP_NO_NVRAM_MASK - mask of isp unit numbers (obviously -# a max of 32) that you wish to disable -# them picking up information from NVRAM -# (for broken cards you can't fix the NVRAM -# on- very rare, or for systems you can't -# change NVRAM on (e.g. alpha) and you don't -# like what's in there) -# SCSI_ISP_PREFER_MEM_MAP - control preference for using memory mappings -# instead of I/O space mappings. It defaults -# to 1 for i386, 0 for alpha. Set to 1 to -# unconditionally prefer mapping memory, -# else it will use I/O space mappings. Of -# course, this can fail if the PCI implement- -# ation doesn't support what you want. -# -# SCSI_ISP_FCDUPLEX - mask of isp unit numbers (obviously -# a max of 32) that you wish to set fibre -# channel full duplex mode on. -# to disable the loading of firmware on. -# SCSI_ISP_FABRIC enable loading of Fabric f/w flavor (2100). -# SCSI_ISP_SCCLUN enable loading of expanded lun f/w (2100). -# SCSI_ISP_WWN - define a WWN to use as a default -# -# ISP_DISABLE_1020_SUPPORT Disable support for 1020/1040 cards -# ISP_DISABLE_1080_SUPPORT Disable support for 1080/1240 cards -# ISP_DISABLE_12160_SUPPORT Disable support for 12160 cards -# ISP_DISABLE_2100_SUPPORT Disable support for 2100 cards -# (these really just to save some code space) -# (use of all four will cause the kernel to not compile) -# -# ISP_COMPILE_FW - compile all firmware in -# ISP_COMPILE_1020_FW - compile in 1020/1040 firmware -# ISP_COMPILE_1080_FW - compile in 1080/1240/1280 firmware -# ISP_COMPILE_12160_FW - compile in 12160 firmware -# ISP_COMPILE_2100_FW - compile in 2100 firmware -# ISP_COMPILE_2200_FW - compile in 2200 firmware +# Options used in dev/isp/ (Qlogic SCSI/FC driver). # # ISP_TARGET_MODE - enable target mode operation # -options SCSI_ISP_NO_FWLOAD_MASK=0x12 # disable FW load for isp1, isp4 -options SCSI_ISP_NO_NVRAM_MASK=0x1 # disable NVRAM for isp0 -options SCSI_ISP_PREFER_MEM_MAP=0 # prefer I/O mapping -options SCSI_ISP_FCDUPLEX=0x4 # isp2 is a Fibre Channel card - # we want in full duplex mode. -options SCSI_ISP_WWN="0x5000000099990000" -#options ISP_DISABLE_1020_SUPPORT -#options ISP_DISABLE_1080_SUPPORT -#options ISP_DISABLE_12160_SUPPORT -#options ISP_DISABLE_2100_SUPPORT -#options ISP_DISABLE_2200_SUPPORT -#options ISP_COMPILE_1020_FW=1 -#options ISP_COMPILE_1080_FW=1 -#options ISP_COMPILE_12160_FW=1 -#options ISP_COMPILE_2100_FW=1 -#options ISP_COMPILE_2200_FW=1 #options ISP_TARGET_MODE=1 # Options used in dev/sym/ (Symbios SCSI driver). diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES index b61d27d8687e..2244571d1c4e 100644 --- a/sys/i386/conf/NOTES +++ b/sys/i386/conf/NOTES @@ -1868,69 +1868,13 @@ options COMPAT_OLDPCI #Use PCI shims and glue for old drivers device ahc # AHA2940 and onboard AIC7xxx devices device amd # AMD 53C974 (Teckram DC-390(T)) device isp # Qlogic family +device ispfw # Firmware Module for Qlogic family device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets) -# -# Options for ISP -# -# SCSI_ISP_NO_FWLOAD_MASK - mask of isp unit numbers (obviously -# a max of 32) that you wish to disable -# to disable the loading of firmware on. -# SCSI_ISP_NO_NVRAM_MASK - mask of isp unit numbers (obviously -# a max of 32) that you wish to disable -# them picking up information from NVRAM -# (for broken cards you can't fix the NVRAM -# on- very rare, or for systems you can't -# change NVRAM on (e.g. alpha) and you don't -# like what's in there) -# SCSI_ISP_PREFER_MEM_MAP - control preference for using memory mappings -# instead of I/O space mappings. It defaults -# to 1 for i386, 0 for alpha. Set to 1 to -# unconditionally prefer mapping memory, -# else it will use I/O space mappings. Of -# course, this can fail if the PCI implement- -# ation doesn't support what you want. -# -# SCSI_ISP_FCDUPLEX - mask of isp unit numbers (obviously -# a max of 32) that you wish to set fibre -# channel full duplex mode on. -# to disable the loading of firmware on. -# SCSI_ISP_FABRIC enable loading of Fabric f/w flavor (2100). -# SCSI_ISP_SCCLUN enable loading of expanded lun f/w (2100). -# SCSI_ISP_WWN - define a WWN to use as a default -# -# ISP_DISABLE_1020_SUPPORT Disable support for 1020/1040 cards -# ISP_DISABLE_1080_SUPPORT Disable support for 1080/1240 cards -# ISP_DISABLE_12160_SUPPORT Disable support for 12160 cards -# ISP_DISABLE_2100_SUPPORT Disable support for 2100 cards -# (these really just to save some code space) -# (use of all four will cause the kernel to not compile) -# -# ISP_COMPILE_FW - compile all firmware in -# ISP_COMPILE_1020_FW - compile in 1020/1040 firmware -# ISP_COMPILE_1080_FW - compile in 1080/1240/1280 firmware -# ISP_COMPILE_12160_FW - compile in 12160 firmware -# ISP_COMPILE_2100_FW - compile in 2100 firmware -# ISP_COMPILE_2200_FW - compile in 2200 firmware +# Options used in dev/isp/ (Qlogic SCSI/FC driver). # # ISP_TARGET_MODE - enable target mode operation # -options SCSI_ISP_NO_FWLOAD_MASK=0x12 # disable FW load for isp1, isp4 -options SCSI_ISP_NO_NVRAM_MASK=0x1 # disable NVRAM for isp0 -options SCSI_ISP_PREFER_MEM_MAP=0 # prefer I/O mapping -options SCSI_ISP_FCDUPLEX=0x4 # isp2 is a Fibre Channel card - # we want in full duplex mode. -options SCSI_ISP_WWN="0x5000000099990000" -#options ISP_DISABLE_1020_SUPPORT -#options ISP_DISABLE_1080_SUPPORT -#options ISP_DISABLE_12160_SUPPORT -#options ISP_DISABLE_2100_SUPPORT -#options ISP_DISABLE_2200_SUPPORT -#options ISP_COMPILE_1020_FW=1 -#options ISP_COMPILE_1080_FW=1 -#options ISP_COMPILE_12160_FW=1 -#options ISP_COMPILE_2100_FW=1 -#options ISP_COMPILE_2200_FW=1 #options ISP_TARGET_MODE=1 # Options used in dev/sym/ (Symbios SCSI driver). |