diff options
Diffstat (limited to 'contrib/bmake/mk/dirdeps.mk')
| -rw-r--r-- | contrib/bmake/mk/dirdeps.mk | 274 |
1 files changed, 180 insertions, 94 deletions
diff --git a/contrib/bmake/mk/dirdeps.mk b/contrib/bmake/mk/dirdeps.mk index 9f051e9203e7..e812416cc88e 100644 --- a/contrib/bmake/mk/dirdeps.mk +++ b/contrib/bmake/mk/dirdeps.mk @@ -1,6 +1,7 @@ -# $Id: dirdeps.mk,v 1.23 2012/11/06 05:44:03 sjg Exp $ +# $Id: dirdeps.mk,v 1.28 2013/03/25 21:11:43 sjg Exp $ -# Copyright (c) 2010-2012, Juniper Networks, Inc. +# Copyright (c) 2010-2013, Juniper Networks, Inc. +# All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions @@ -33,21 +34,31 @@ # This is what we do with DIRDEPS # DIRDEPS: -# This is a list of directories - relative to SRCTOP, it is only -# of interest to .MAKE.LEVEL 0. +# This is a list of directories - relative to SRCTOP, it is +# normally only of interest to .MAKE.LEVEL 0. # In some cases the entry may be qualified with a .<machine> -# suffix, for example to force building something for the pseudo +# or .<target_spec> suffix (see TARGET_SPEC_VARS below), +# for example to force building something for the pseudo # machines "host" or "common" regardless of current ${MACHINE}. -# All unqualified entries end up being qualified with .${MACHINE} -# and _DIRDEPS_USE below, uses the suffix to set MACHINE +# +# All unqualified entries end up being qualified with .${TARGET_SPEC} +# and partially qualified (if TARGET_SPEC_VARS has multiple +# entries) are also expanded to a full .<target_spec>. +# The _DIRDEPS_USE target uses the suffix to set TARGET_SPEC # correctly when visiting each entry. # -# Each entry is also converted into a set of paths to look for -# Makefile.depend.<machine> to learn the dependencies of each. -# Each Makefile.depend.<machine> sets DEP_RELDIR to be the +# The fully qualified directory entries are used to construct a +# dependency graph that will drive the build later. +# +# Also, for each fully qualified directory target, we will search +# using ${.MAKE.DEPENDFILE_PREFERENCE} to find additional +# dependencies. We use Makefile.depend (default value for +# .MAKE.DEPENDFILE_PREFIX) to refer to these makefiles to +# distinguish them from others. +# +# Each Makefile.depend file sets DEP_RELDIR to be the # the RELDIR (path relative to SRCTOP) for its directory, and -# DEP_MACHINE to its suffix (<machine>), further since -# each Makefile.depend.<machine> includes dirdeps.mk, this +# since each Makefile.depend file includes dirdeps.mk, this # processing is recursive and results in .MAKE.LEVEL 0 learning the # dependencies of the tree wrt the initial directory (_DEP_RELDIR). # @@ -55,38 +66,49 @@ # Indicates whether .MAKE.LEVEL 0 builds anything: # if "no" sub-makes are used to build everything, # if "yes" sub-makes are only used to build for other machines. +# It is best to use "no", but this can require fixing some +# makefiles to not do anything at .MAKE.LEVEL 0. # # TARGET_SPEC_VARS -# All the description above (and below) assumes <machine> is the -# only data needed to control the build. -# This is not always the case. So in addition to setting -# MACHINE in the build environment we set TARGET_SPEC which is -# composed of the values of TARGET_SPEC_VARS separated by -# commas. The default is just MACHINE. +# The default value is just MACHINE, and for most environments +# this is sufficient. The _DIRDEPS_USE target actually sets +# both MACHINE and TARGET_SPEC to the suffix of the current +# target so that in the general case TARGET_SPEC can be ignored. # -# If more that MACHINE is needed then sys.mk needs to decompose +# If more than MACHINE is needed then sys.mk needs to decompose # TARGET_SPEC and set the relevant variables accordingly. -# It is important that MACHINE be included in TARGET_SPEC_VARS -# since if there is more the value passed as MACHINE will infact -# be the TARGET_SPEC. +# It is important that MACHINE be included in and actually be +# the first member of TARGET_SPEC_VARS. This allows other +# variables to be considered optional, and some of the treatment +# below relies on MACHINE being the first entry. # Note: TARGET_SPEC cannot contain any '.'s so the target -# tripple used by compiler folk won't work (directly anyway). +# triple used by compiler folk won't work (directly anyway). # # For example: # -# # variables other than MACHINE might be optional +# # Always list MACHINE first, +# # other variables might be optional. # TARGET_SPEC_VARS = MACHINE TARGET_OS # .if ${TARGET_SPEC:Uno:M*,*} != "" # _tspec := ${TARGET_SPEC:S/,/ /g} # MACHINE := ${_tspec:[1]} # TARGET_OS := ${_tspec:[2]} # # etc. +# # We need to stop that TARGET_SPEC affecting any submakes +# # and deal with MACHINE=${TARGET_SPEC} in the environment. +# TARGET_SPEC = +# # export but do not track +# .export-env TARGET_SPEC +# .export ${TARGET_SPEC_VARS} # .for v in ${TARGET_SPEC_VARS:O:u} # .if empty($v) # .undef $v # .endif # .endfor # .endif +# # make sure we know what TARGET_SPEC is +# # as we may need it to find Makefile.depend* +# TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,} # .if ${.MAKE.LEVEL} == 0 @@ -100,14 +122,48 @@ # do some setup we only need once _CURDIR ?= ${.CURDIR} +# make sure these are empty to start with +_DEP_TARGET_SPEC = +_DIRDEP_CHECKED = + # If TARGET_SPEC_VARS is other than just MACHINE # it should be set by sys.mk or similar by now. # TARGET_SPEC must not contain any '.'s. TARGET_SPEC_VARS ?= MACHINE +# this is what we started with TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,} +# this is what we mostly use below +DEP_TARGET_SPEC = ${TARGET_SPEC_VARS:S,^,DEP_,:@v@${$v:U}@:ts,} +# make sure we have defaults +.for v in ${TARGET_SPEC_VARS} +DEP_$v ?= ${$v} +.endfor + +.if ${TARGET_SPEC_VARS:[#]} > 1 +# Ok, this gets more complex (putting it mildly). +# In order to stay sane, we need to ensure that all the build_dirs +# we compute below are fully qualified wrt DEP_TARGET_SPEC. +# The makefiles may only partially specify (eg. MACHINE only), +# so we need to construct a set of modifiers to fill in the gaps. +# jot 10 should output 1 2 3 .. 10 +JOT ?= jot +_tspec_x := ${${JOT} ${TARGET_SPEC_VARS:[#]}:L:sh} +# this handles unqualified entries +M_dep_qual_fixes = C;(/[^/.,]+)$$;\1.${DEP_TARGET_SPEC}; +# there needs to be at least one item missing for these to make sense +.for i in ${_tspec_x:[2..-1]} +_tspec_m$i := ${TARGET_SPEC_VARS:[2..$i]:@w@[^,]+@:ts,} +_tspec_a$i := ,${TARGET_SPEC_VARS:[$i..-1]:@v@$${DEP_$v}@:ts,} +M_dep_qual_fixes += C;(\.${_tspec_m$i})$$;\1${_tspec_a$i}; +.endfor +.else +# A harmless? default. +M_dep_qual_fixes = U +.endif .if !defined(.MAKE.DEPENDFILE_PREFERENCE) -# this makes the logic below neater? +# .MAKE.DEPENDFILE_PREFERENCE makes the logic below neater? +# you really want this set by sys.mk or similar .MAKE.DEPENDFILE_PREFERENCE = ${_CURDIR}/${.MAKE.DEPENDFILE:T} .if ${.MAKE.DEPENDFILE:E} == "${TARGET_SPEC}" .if ${TARGET_SPEC} != ${MACHINE} @@ -118,12 +174,12 @@ TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,} .endif _default_dependfile := ${.MAKE.DEPENDFILE_PREFERENCE:[1]:T} -_machine_dependfiles := ${.MAKE.DEPENDFILE_PREFERENCE:M*.${TARGET_SPEC}} \ - ${.MAKE.DEPENDFILE_PREFERENCE:M*.${MACHINE}} +_machine_dependfiles := ${.MAKE.DEPENDFILE_PREFERENCE:T:M*${MACHINE}*} # for machine specific dependfiles we require ${MACHINE} to be at the end # also for the sake of sanity we require a common prefix .if !defined(.MAKE.DEPENDFILE_PREFIX) +# knowing .MAKE.DEPENDFILE_PREFIX helps .if !empty(_machine_dependfiles) .MAKE.DEPENDFILE_PREFIX := ${_machine_dependfiles:[1]:T:R} .else @@ -133,24 +189,45 @@ _machine_dependfiles := ${.MAKE.DEPENDFILE_PREFERENCE:M*.${TARGET_SPEC}} \ # this is how we identify non-machine specific dependfiles -N_notmachine := ${.MAKE.DEPENDFILE_PREFERENCE:E:N${TARGET_SPEC}:N${MACHINE}:${M_ListToSkip}} +N_notmachine := ${.MAKE.DEPENDFILE_PREFERENCE:E:N*${MACHINE}*:${M_ListToSkip}} .endif # !target(_DIRDEP_USE) +# if we were included recursively _DEP_TARGET_SPEC should be valid. +.if empty(_DEP_TARGET_SPEC) +# we may or may not have included a dependfile yet _last_dependfile := ${.MAKE.MAKEFILES:M*/${.MAKE.DEPENDFILE_PREFIX}*:[-1]} +.if !empty(_debug_reldir) +.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _last_dependfile='${_last_dependfile}' +.endif -# Note: if a makefile is read many times, the above -# will not work, so we also test for DEP_MACHINE==depend below. -.if empty(_last_dependfile) -# we haven't included one yet -DEP_MACHINE ?= ${TARGET_MACHINE:U${TARGET_SPEC}} -# else it should be correctly set by ${.MAKE.DEPENDFILE} -.elif ${_last_dependfile:E:${N_notmachine}} == "" || ${DEP_MACHINE:Uno:${N_notmachine}} == "" -# don't rely on manually maintained files to be correct -DEP_MACHINE := ${_DEP_MACHINE:U${TARGET_SPEC}} +.if empty(_last_dependfile) || ${_last_dependfile:E:${N_notmachine}} == "" +# this is all we have to work with +DEP_MACHINE = ${TARGET_MACHINE:U${MACHINE}} +_DEP_TARGET_SPEC := ${DEP_TARGET_SPEC} .else -# just in case -DEP_MACHINE ?= ${_last_dependfile:E} +_DEP_TARGET_SPEC = ${_last_dependfile:${M_dep_qual_fixes:ts:}:E} +.endif +.if !empty(_last_dependfile) +# record that we've read dependfile for this +_DIRDEP_CHECKED += ${_CURDIR}.${TARGET_SPEC} +.endif +.endif + +# by now _DEP_TARGET_SPEC should be set, parse it. +.if ${TARGET_SPEC_VARS:[#]} > 1 +# we need to parse DEP_MACHINE may or may not contain more info +_tspec := ${_DEP_TARGET_SPEC:S/,/ /g} +.for i in ${_tspec_x} +DEP_${TARGET_SPEC_VARS:[$i]} := ${_tspec:[$i]} +.endfor +.for v in ${TARGET_SPEC_VARS:O:u} +.if empty(DEP_$v) +.undef DEP_$v +.endif +.endfor +.else +DEP_MACHINE := ${_DEP_TARGET_SPEC} .endif # pickup customizations @@ -179,17 +256,18 @@ _DEP_RELDIR := ${DEP_RELDIR} SKIP_HOSTDIR ?= NSkipHostDir = ${SKIP_HOSTDIR:N*.host:S,$,.host,:N.host:${M_ListToSkip}} -NSkipHostDep = ${SKIP_HOSTDIR:R:@d@*/$d*.host@:${M_ListToSkip}} # things we always skip # SKIP_DIRDEPS allows for adding entries on command line. SKIP_DIR += .host *.WAIT ${SKIP_DIRDEPS} +SKIP_DIR.host += ${SKIP_HOSTDIR} -.ifdef HOSTPROG -SKIP_DIR += ${SKIP_HOSTDIR} -.endif +DEP_SKIP_DIR = ${SKIP_DIR} \ + ${SKIP_DIR.${DEP_TARGET_SPEC}:U} \ + ${SKIP_DIR.${DEP_MACHINE}:U} \ + ${SKIP_DIRDEPS.${DEP_MACHINE}:U} -NSkipDir = ${SKIP_DIR:${M_ListToSkip}} +NSkipDir = ${DEP_SKIP_DIR:${M_ListToSkip}} .if defined(NO_DIRDEPS) || defined(NODIRDEPS) # confine ourselves to the original dir @@ -198,12 +276,15 @@ DIRDEPS_FILTER += M${_DEP_RELDIR}* # we supress SUBDIR when visiting the leaves # we assume sys.mk will set MACHINE_ARCH +# you can add extras to DIRDEP_USE_ENV +# if there is no makefile in the target directory, we skip it. _DIRDEP_USE: .USE .MAKE @for m in ${.MAKE.MAKEFILE_PREFERENCE}; do \ test -s ${.TARGET:R}/$$m || continue; \ echo "${TRACER}Checking ${.TARGET:R} for ${.TARGET:E} ..."; \ + MACHINE_ARCH= NO_SUBDIR=1 ${DIRDEP_USE_ENV} \ TARGET_SPEC=${.TARGET:E} \ - MACHINE=${.TARGET:E} MACHINE_ARCH= NO_SUBDIR=1 \ + MACHINE=${.TARGET:E} \ ${.MAKE} -C ${.TARGET:R} || exit 1; \ break; \ done @@ -260,7 +341,7 @@ _this_dir := ${SRCTOP}/${DEP_RELDIR} _dep_hack := ${_this_dir}/${.MAKE.DEPENDFILE_PREFIX}.inc .-include "${_dep_hack}" -.if ${DEP_RELDIR} != ${_DEP_RELDIR} || ${DEP_MACHINE} != ${TARGET_SPEC} +.if ${DEP_RELDIR} != ${_DEP_RELDIR} || ${DEP_TARGET_SPEC} != ${TARGET_SPEC} # this should be all _machines := ${DEP_MACHINE} .else @@ -275,17 +356,23 @@ _machines += host _machines := ${_machines:O:u} .endif -# reset these each time through +.if ${TARGET_SPEC_VARS:[#]} > 1 +# we need to tweak _machines +_dm := ${DEP_MACHINE} +_machines := ${_machines:@DEP_MACHINE@${DEP_TARGET_SPEC}@} +DEP_MACHINE := ${_dm} +.endif + +# reset each time through _build_dirs = -_depdir_files = .if ${DEP_RELDIR} == ${_DEP_RELDIR} # pickup other machines for this dir if necessary .if ${BUILD_AT_LEVEL0:Uyes} == "no" _build_dirs += ${_machines:@m@${_CURDIR}.$m@} .else -_build_dirs += ${_machines:N${DEP_MACHINE}:@m@${_CURDIR}.$m@} -.if ${DEP_MACHINE} == ${TARGET_SPEC} +_build_dirs += ${_machines:N${DEP_TARGET_SPEC}:@m@${_CURDIR}.$m@} +.if ${DEP_TARGET_SPEC} == ${TARGET_SPEC} # pickup local dependencies now .-include <.depend> .endif @@ -293,15 +380,23 @@ _build_dirs += ${_machines:N${DEP_MACHINE}:@m@${_CURDIR}.$m@} .endif .if !empty(_debug_reldir) -.info ${DEP_RELDIR}.${DEP_MACHINE}: _last_dependfile='${_last_dependfile}' -.info ${DEP_RELDIR}.${DEP_MACHINE}: DIRDEPS='${DIRDEPS}' -.info ${DEP_RELDIR}.${DEP_MACHINE}: _machines='${_machines}' +.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: DIRDEPS='${DIRDEPS}' +.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _machines='${_machines}' .endif .if !empty(DIRDEPS) +# these we reset each time through as they can depend on DEP_MACHINE +DEP_DIRDEPS_FILTER = \ + ${DIRDEPS_FILTER.${DEP_TARGET_SPEC}:U} \ + ${DIRDEPS_FILTER.${DEP_MACHINE}:U} \ + ${DIRDEPS_FILTER:U} +.if empty(DEP_DIRDEPS_FILTER) +# something harmless +DEP_DIRDEPS_FILTER = U +.endif # this is what we start with -__depdirs := ${DIRDEPS:${NSkipDir}:${DIRDEPS_FILTER:ts:}:O:u:@d@${SRCTOP}/$d@} +__depdirs := ${DIRDEPS:${NSkipDir}:${DEP_DIRDEPS_FILTER:ts:}:O:u:@d@${SRCTOP}/$d@} # some entries may be qualified with .<machine> # the :M*/*/*.* just tries to limit the dirs we check to likely ones. @@ -327,26 +422,8 @@ _build_dirs += \ ${__qual_depdirs:N*.host} \ ${_machines:@m@${__unqual_depdirs:@d@$d.$m@}@} -_build_dirs := ${_build_dirs:O:u} - -# this is where we will pick up more dependencies from -# the inner inline loops look complex, but save a significant -# amount of memory compared to a .for loop. -_depdir_files = -.for d in ${_build_dirs} -.if exists($d) -# easy, we're building for ${MACHINE} -_depdir_files += ${.MAKE.DEPENDFILE_PREFERENCE:T:@m@${exists($d/$m):?$d/$m:}@:[1]} -.elif exists(${d:R}) && ${d:R:T} == ${d:T:R} -# a little more complex - building for another machine -# we will ensure the file is qualified with a machine -# so that if necessary _DEP_MACHINE can be set below -_depdir_files += ${.MAKE.DEPENDFILE_PREFERENCE:T:S,.${TARGET_SPEC}$,.${d:E},:S,.${MACHINE}$,.${d:E},:@m@${exists(${d:R}/$m):?${d:R}/$m:}@:[1]:@m@${"${m:M*.${d:E}}":?$m:$m.${d:E}}@} -.endif -.endfor - -# clean up -_depdir_files := ${_depdir_files:O:u} +# qualify everything now +_build_dirs := ${_build_dirs:${M_dep_qual_fixes:ts:}:O:u} .endif # empty DIRDEPS @@ -360,48 +437,57 @@ dirdeps: ${_build_dirs} ${_build_dirs}: _DIRDEP_USE .if !empty(_debug_reldir) -.info ${DEP_RELDIR}.${DEP_MACHINE}: ${_build_dirs} +.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: needs: ${_build_dirs} .endif +# this builds the dependency graph .for m in ${_machines} # it would be nice to do :N${.TARGET} .if !empty(__qual_depdirs) -.for q in ${__qual_depdirs:E:O:u:N$m} +.for q in ${__qual_depdirs:${M_dep_qual_fixes:ts:}:E:O:u:N$m} .if !empty(_debug_reldir) || ${DEBUG_DIRDEPS:@x@${${DEP_RELDIR}.$m:L:M$x}${${DEP_RELDIR}.$q:L:M$x}@} != "" -.info ${DEP_RELDIR}.$m: ${_build_dirs:M*.$q} +.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$q} .endif ${_this_dir}.$m: ${_build_dirs:M*.$q} .endfor .endif .if !empty(_debug_reldir) -.info ${DEP_RELDIR}.$m: ${_build_dirs:M*.$m:N${_this_dir}.$m} +.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$m:N${_this_dir}.$m} .endif ${_this_dir}.$m: ${_build_dirs:M*.$m:N${_this_dir}.$m} .endfor .endif -.for d in ${_depdir_files} -.if ${.MAKE.MAKEFILES:M${d}} == "" +# Now find more dependencies - and recurse. +.for d in ${_build_dirs} +.if ${_DIRDEP_CHECKED:M$d} == "" +# once only +_DIRDEP_CHECKED += $d +# Note: _build_dirs is fully qualifed so d:R is always the directory +.if exists(${d:R}) +# Warning: there is an assumption here that MACHINE is always +# the first entry in TARGET_SPEC_VARS. +# If TARGET_SPEC and MACHINE are insufficient, you have a problem. +_m := ${.MAKE.DEPENDFILE_PREFERENCE:T:S;${TARGET_SPEC}$;${d:E};:S;${MACHINE};${d:E:C/,.*//};:@m@${exists(${d:R}/$m):?${d:R}/$m:}@:[1]} +.if !empty(_m) +_qm := ${_m:${M_dep_qual_fixes:ts:}} .if !empty(_debug_search) -.info Looking for $d -.endif -.if exists($d) -.include <$d> -.elif exists(${d:R}) -# an unqualified file exists, we qualified it above so we can set _DEP_MACHINE -# it might be manually maintained and shared by all machine types -# tell it the machine we are interested in. -_DEP_MACHINE := ${d:E} -.if !empty(_debug_reldir) -.info loading ${d:R} for ${_DEP_MACHINE} +.info Looking for ${_qm} +.endif +# we pass _DEP_TARGET_SPEC to tell the next step what we want +_DEP_TARGET_SPEC := ${d:E} +# some makefiles may still look at this +_DEP_MACHINE := ${d:E:C/,.*//} +.if !empty(_debug_reldir) && ${_qm} != ${_m} +.info loading ${_m} for ${d:E} +.endif +.include <${_m}> .endif -# pretend we read $d, so we don't come by here again. -.MAKE.MAKEFILES += $d -.include <${d:R}> .endif .endif .endfor + .endif # -V .elif ${.MAKE.LEVEL} > 42 |