aboutsummaryrefslogtreecommitdiff
path: root/lib/libpmc/pmu-events/arch/x86/skylakex/uncore-other.json
diff options
context:
space:
mode:
Diffstat (limited to 'lib/libpmc/pmu-events/arch/x86/skylakex/uncore-other.json')
-rw-r--r--lib/libpmc/pmu-events/arch/x86/skylakex/uncore-other.json901
1 files changed, 803 insertions, 98 deletions
diff --git a/lib/libpmc/pmu-events/arch/x86/skylakex/uncore-other.json b/lib/libpmc/pmu-events/arch/x86/skylakex/uncore-other.json
index adb42c72f5c8..6ed92bc5c129 100644
--- a/lib/libpmc/pmu-events/arch/x86/skylakex/uncore-other.json
+++ b/lib/libpmc/pmu-events/arch/x86/skylakex/uncore-other.json
@@ -104,33 +104,21 @@
"Unit": "CHA"
},
{
- "BriefDescription": "write requests from remote home agent",
- "Counter": "0,1,2,3",
- "EventCode": "0x50",
- "EventName": "UNC_CHA_REQUESTS.WRITES_REMOTE",
- "PerPkg": "1",
- "UMask": "0x08",
- "Unit": "CHA"
- },
- {
"BriefDescription": "UPI interconnect send bandwidth for payload. Derived from unc_upi_txl_flits.all_data",
"Counter": "0,1,2,3",
"EventCode": "0x2",
"EventName": "UPI_DATA_BANDWIDTH_TX",
"PerPkg": "1",
"ScaleUnit": "7.11E-06Bytes",
- "UMask": "0x0F",
+ "UMask": "0xf",
"Unit": "UPI LL"
},
{
- "BriefDescription": "PCI Express bandwidth reading at IIO. Derived from unc_iio_data_req_of_cpu.mem_read.part0",
+ "BriefDescription": "PCI Express bandwidth reading at IIO, part 0",
"Counter": "0,1",
"EventCode": "0x83",
- "EventName": "LLC_MISSES.PCIE_READ",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0",
"FCMask": "0x07",
- "Filter": "ch_mask=0x1f",
- "MetricExpr": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART1 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART2 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART3",
- "MetricName": "LLC_MISSES.PCIE_READ",
"PerPkg": "1",
"PortMask": "0x01",
"ScaleUnit": "4Bytes",
@@ -138,118 +126,117 @@
"Unit": "IIO"
},
{
- "BriefDescription": "PCI Express bandwidth writing at IIO. Derived from unc_iio_data_req_of_cpu.mem_write.part0",
+ "BriefDescription": "PCI Express bandwidth reading at IIO, part 1",
"Counter": "0,1",
"EventCode": "0x83",
- "EventName": "LLC_MISSES.PCIE_WRITE",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART1",
"FCMask": "0x07",
- "Filter": "ch_mask=0x1f",
- "MetricExpr": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3",
- "MetricName": "LLC_MISSES.PCIE_WRITE",
"PerPkg": "1",
- "PortMask": "0x01",
+ "PortMask": "0x02",
"ScaleUnit": "4Bytes",
- "UMask": "0x01",
+ "UMask": "0x04",
"Unit": "IIO"
},
{
- "BriefDescription": "PCI Express bandwidth writing at IIO, part 0",
+ "BriefDescription": "PCI Express bandwidth reading at IIO, part 2",
"Counter": "0,1",
"EventCode": "0x83",
- "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART2",
"FCMask": "0x07",
- "MetricExpr": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3",
- "MetricName": "LLC_MISSES.PCIE_WRITE",
"PerPkg": "1",
- "PortMask": "0x01",
+ "PortMask": "0x04",
"ScaleUnit": "4Bytes",
- "UMask": "0x01",
+ "UMask": "0x04",
"Unit": "IIO"
},
{
- "BriefDescription": "PCI Express bandwidth writing at IIO, part 1",
+ "BriefDescription": "PCI Express bandwidth reading at IIO, part 3",
"Counter": "0,1",
"EventCode": "0x83",
- "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART3",
"FCMask": "0x07",
"PerPkg": "1",
- "PortMask": "0x02",
+ "PortMask": "0x08",
"ScaleUnit": "4Bytes",
- "UMask": "0x01",
+ "UMask": "0x04",
"Unit": "IIO"
},
{
- "BriefDescription": "PCI Express bandwidth writing at IIO, part 2",
+ "BriefDescription": "PCI Express bandwidth reading at IIO. Derived from unc_iio_data_req_of_cpu.mem_read.part0",
"Counter": "0,1",
"EventCode": "0x83",
- "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2",
+ "EventName": "LLC_MISSES.PCIE_READ",
"FCMask": "0x07",
+ "Filter": "ch_mask=0x1f",
+ "MetricExpr": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0 +UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART1 +UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART2 +UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART3",
+ "MetricName": "LLC_MISSES.PCIE_READ",
"PerPkg": "1",
- "PortMask": "0x04",
+ "PortMask": "0x01",
"ScaleUnit": "4Bytes",
- "UMask": "0x01",
+ "UMask": "0x04",
"Unit": "IIO"
},
{
- "BriefDescription": "PCI Express bandwidth writing at IIO, part 3",
+ "BriefDescription": "PCI Express bandwidth writing at IIO, part 0",
"Counter": "0,1",
"EventCode": "0x83",
- "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0",
"FCMask": "0x07",
"PerPkg": "1",
- "PortMask": "0x08",
+ "PortMask": "0x01",
"ScaleUnit": "4Bytes",
"UMask": "0x01",
"Unit": "IIO"
},
{
- "BriefDescription": "PCI Express bandwidth reading at IIO, part 0",
+ "BriefDescription": "PCI Express bandwidth writing at IIO, part 1",
"Counter": "0,1",
"EventCode": "0x83",
- "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1",
"FCMask": "0x07",
- "MetricExpr": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART1 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART2 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART3",
- "MetricName": "LLC_MISSES.PCIE_READ",
"PerPkg": "1",
- "PortMask": "0x01",
+ "PortMask": "0x02",
"ScaleUnit": "4Bytes",
- "UMask": "0x04",
+ "UMask": "0x01",
"Unit": "IIO"
},
{
- "BriefDescription": "PCI Express bandwidth reading at IIO, part 1",
+ "BriefDescription": "PCI Express bandwidth writing at IIO, part 2",
"Counter": "0,1",
"EventCode": "0x83",
- "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART1",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2",
"FCMask": "0x07",
"PerPkg": "1",
- "PortMask": "0x02",
+ "PortMask": "0x04",
"ScaleUnit": "4Bytes",
- "UMask": "0x04",
+ "UMask": "0x01",
"Unit": "IIO"
},
{
- "BriefDescription": "PCI Express bandwidth reading at IIO, part 2",
+ "BriefDescription": "PCI Express bandwidth writing at IIO, part 3",
"Counter": "0,1",
"EventCode": "0x83",
- "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART2",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3",
"FCMask": "0x07",
"PerPkg": "1",
- "PortMask": "0x04",
+ "PortMask": "0x08",
"ScaleUnit": "4Bytes",
- "UMask": "0x04",
+ "UMask": "0x01",
"Unit": "IIO"
},
{
- "BriefDescription": "PCI Express bandwidth reading at IIO, part 3",
+ "BriefDescription": "PCI Express bandwidth writing at IIO. Derived from unc_iio_data_req_of_cpu.mem_write.part0",
"Counter": "0,1",
"EventCode": "0x83",
- "EventName": "UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART3",
+ "EventName": "LLC_MISSES.PCIE_WRITE",
"FCMask": "0x07",
+ "Filter": "ch_mask=0x1f",
+ "MetricExpr": "UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 +UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3",
+ "MetricName": "LLC_MISSES.PCIE_WRITE",
"PerPkg": "1",
- "PortMask": "0x08",
+ "PortMask": "0x01",
"ScaleUnit": "4Bytes",
- "UMask": "0x04",
+ "UMask": "0x01",
"Unit": "IIO"
},
{
@@ -313,6 +300,16 @@
"Unit": "CHA"
},
{
+ "BriefDescription": "FaST wire asserted; Horizontal",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xA5",
+ "EventName": "UNC_CHA_FAST_ASSERTED.HORZ",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of cycles either the local or incoming distress signals are asserted. Incoming distress includes up, dn and across.",
+ "UMask": "0x02",
+ "Unit": "CHA"
+ },
+ {
"BriefDescription": "Read request from a remote socket which hit in the HitMe Cache to a line In the E state",
"Counter": "0,1,2,3",
"EventCode": "0x5F",
@@ -343,6 +340,46 @@
"Unit": "CHA"
},
{
+ "BriefDescription": "Lines Victimized; Lines in E state",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x37",
+ "EventName": "UNC_CHA_LLC_VICTIMS.TOTAL_E",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
+ "UMask": "0x02",
+ "Unit": "CHA"
+ },
+ {
+ "BriefDescription": "Lines Victimized; Lines in F State",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x37",
+ "EventName": "UNC_CHA_LLC_VICTIMS.TOTAL_F",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
+ "UMask": "0x08",
+ "Unit": "CHA"
+ },
+ {
+ "BriefDescription": "Lines Victimized; Lines in M state",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x37",
+ "EventName": "UNC_CHA_LLC_VICTIMS.TOTAL_M",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
+ "UMask": "0x01",
+ "Unit": "CHA"
+ },
+ {
+ "BriefDescription": "Lines Victimized; Lines in S State",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x37",
+ "EventName": "UNC_CHA_LLC_VICTIMS.TOTAL_S",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
+ "UMask": "0x04",
+ "Unit": "CHA"
+ },
+ {
"BriefDescription": "Number of times that an RFO hit in S state.",
"Counter": "0,1,2,3",
"EventCode": "0x39",
@@ -373,6 +410,65 @@
"Unit": "CHA"
},
{
+ "BriefDescription": "Ingress (from CMS) Allocations; IRQ",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x13",
+ "EventName": "UNC_CHA_RxC_INSERTS.IRQ",
+ "PerPkg": "1",
+ "PublicDescription": "Counts number of allocations per cycle into the specified Ingress queue.",
+ "UMask": "0x01",
+ "Unit": "CHA"
+ },
+ {
+ "BriefDescription": "Ingress (from CMS) Request Queue Rejects; PhyAddr Match",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x19",
+ "EventName": "UNC_CHA_RxC_IRQ1_REJECT.PA_MATCH",
+ "PerPkg": "1",
+ "PublicDescription": "Ingress (from CMS) Request Queue Rejects; PhyAddr Match",
+ "UMask": "0x80",
+ "Unit": "CHA"
+ },
+ {
+ "BriefDescription": "Ingress (from CMS) Occupancy; IRQ",
+ "EventCode": "0x11",
+ "EventName": "UNC_CHA_RxC_OCCUPANCY.IRQ",
+ "PerPkg": "1",
+ "PublicDescription": "Counts number of entries in the specified Ingress queue in each cycle.",
+ "UMask": "0x01",
+ "Unit": "CHA"
+ },
+ {
+ "BriefDescription": "Snoop filter capacity evictions for E-state entries.",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x3D",
+ "EventName": "UNC_CHA_SF_EVICTION.E_STATE",
+ "PerPkg": "1",
+ "PublicDescription": "Counts snoop filter capacity evictions for entries tracking exclusive lines in the cores cache. Snoop filter capacity evictions occur when the snoop filter is full and evicts an existing entry to track a new entry. Does not count clean evictions such as when a cores cache replaces a tracked cacheline with a new cacheline.",
+ "UMask": "0x02",
+ "Unit": "CHA"
+ },
+ {
+ "BriefDescription": "Snoop filter capacity evictions for M-state entries.",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x3D",
+ "EventName": "UNC_CHA_SF_EVICTION.M_STATE",
+ "PerPkg": "1",
+ "PublicDescription": "Counts snoop filter capacity evictions for entries tracking modified lines in the cores cache. Snoop filter capacity evictions occur when the snoop filter is full and evicts an existing entry to track a new entry. Does not count clean evictions such as when a cores cache replaces a tracked cacheline with a new cacheline.",
+ "UMask": "0x01",
+ "Unit": "CHA"
+ },
+ {
+ "BriefDescription": "Snoop filter capacity evictions for S-state entries.",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x3D",
+ "EventName": "UNC_CHA_SF_EVICTION.S_STATE",
+ "PerPkg": "1",
+ "PublicDescription": "Counts snoop filter capacity evictions for entries tracking shared lines in the cores cache. Snoop filter capacity evictions occur when the snoop filter is full and evicts an existing entry to track a new entry. Does not count clean evictions such as when a cores cache replaces a tracked cacheline with a new cacheline.",
+ "UMask": "0x04",
+ "Unit": "CHA"
+ },
+ {
"BriefDescription": "RspCnflct* Snoop Responses Received",
"Counter": "0,1,2,3",
"EventCode": "0x5C",
@@ -428,7 +524,7 @@
"EventCode": "0x5C",
"EventName": "UNC_CHA_SNOOP_RESP.RSP_WBWB",
"PerPkg": "1",
- "PublicDescription": "Counts when a transaction with the opcode type Rsp*WB Snoop Response was received which indicates which indicates the data was written back to it's home. This is returned when a non-RFO request hits a cacheline in the Modified state. The Cache can either downgrade the cacheline to a S (Shared) or I (Invalid) state depending on how the system has been configured. This response will also be sent when a cache requests E (Exclusive) ownership of a cache line without receiving data, because the cache must acquire ownership.",
+ "PublicDescription": "Counts when a transaction with the opcode type Rsp*WB Snoop Response was received which indicates which indicates the data was written back to it's home. This is returned when a non-RFO request hits a cacheline in the Modified state. The Cache can either downgrade the cacheline to a S (Shared) or I (Invalid) state depending on how the system has been configured. This reponse will also be sent when a cache requests E (Exclusive) ownership of a cache line without receiving data, because the cache must acquire ownership.",
"UMask": "0x10",
"Unit": "CHA"
},
@@ -442,6 +538,98 @@
"Unit": "IIO"
},
{
+ "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 0",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC2",
+ "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.PART0",
+ "FCMask": "0x4",
+ "PerPkg": "1",
+ "PortMask": "0x01",
+ "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 0",
+ "UMask": "0x03",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 1",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC2",
+ "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.PART1",
+ "FCMask": "0x4",
+ "PerPkg": "1",
+ "PortMask": "0x02",
+ "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 1",
+ "UMask": "0x03",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 2",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC2",
+ "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.PART2",
+ "FCMask": "0x4",
+ "PerPkg": "1",
+ "PortMask": "0x04",
+ "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 2",
+ "UMask": "0x03",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 3",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC2",
+ "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.PART3",
+ "FCMask": "0x4",
+ "PerPkg": "1",
+ "PortMask": "0x08",
+ "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 3",
+ "UMask": "0x03",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 0",
+ "Counter": "2,3",
+ "EventCode": "0xD5",
+ "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.PART0",
+ "FCMask": "0x04",
+ "PerPkg": "1",
+ "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 0",
+ "UMask": "0x01",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 1",
+ "Counter": "2,3",
+ "EventCode": "0xD5",
+ "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.PART1",
+ "FCMask": "0x04",
+ "PerPkg": "1",
+ "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 1",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 2",
+ "Counter": "2,3",
+ "EventCode": "0xD5",
+ "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.PART2",
+ "FCMask": "0x04",
+ "PerPkg": "1",
+ "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 2",
+ "UMask": "0x04",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 3",
+ "Counter": "2,3",
+ "EventCode": "0xD5",
+ "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.PART3",
+ "FCMask": "0x04",
+ "PerPkg": "1",
+ "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 3",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
"BriefDescription": "Read request for 4 bytes made by the CPU to IIO Part0",
"Counter": "2,3",
"EventCode": "0xC0",
@@ -449,7 +637,7 @@
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x01",
- "PublicDescription": "Counts every read request for 4 bytes of data made by a unit on the main die (generally a core) to the MMIO space of a card on IIO Part0. In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every read request for 4 bytes of data made by a unit on the main die (generally a core) or by another IIO unit to the MMIO space of a card on IIO Part0. In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
"UMask": "0x04",
"Unit": "IIO"
},
@@ -461,7 +649,7 @@
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x02",
- "PublicDescription": "Counts every read request for 4 bytes of data made by a unit on the main die (generally a core) to the MMIO space of a card on IIO Part1. In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every read request for 4 bytes of data made by a unit on the main die (generally a core) or by another IIO unit to the MMIO space of a card on IIO Part1. In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
"UMask": "0x04",
"Unit": "IIO"
},
@@ -473,7 +661,7 @@
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x04",
- "PublicDescription": "Counts every read request for 4 bytes of data made by a unit on the main die (generally a core) to the MMIO space of a card on IIO Part2. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every read request for 4 bytes of data made by a unit on the main die (generally a core) or by another IIO unit to the MMIO space of a card on IIO Part2. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
"UMask": "0x04",
"Unit": "IIO"
},
@@ -485,7 +673,7 @@
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x08",
- "PublicDescription": "Counts every read request for 4 bytes of data made by a unit on the main die (generally a core) to the MMIO space of a card on IIO Part3. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every read request for 4 bytes of data made by a unit on the main die (generally a core) or by another IIO unit to the MMIO space of a card on IIO Part3. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
"UMask": "0x04",
"Unit": "IIO"
},
@@ -497,7 +685,7 @@
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x01",
- "PublicDescription": "Counts every write request of 4 bytes of data made to the MMIO space of a card on IIO Part0 by a unit on the main die (generally a core). In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every write request of 4 bytes of data made to the MMIO space of a card on IIO Part0 by a unit on the main die (generally a core) or by another IIO unit. In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
"UMask": "0x01",
"Unit": "IIO"
},
@@ -509,35 +697,227 @@
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x02",
- "PublicDescription": "Counts every write request of 4 bytes of data made to the MMIO space of a card on IIO Part1 by a unit on the main die (generally a core). In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every write request of 4 bytes of data made to the MMIO space of a card on IIO Part1 by a unit on the main die (generally a core) or by another IIO unit. In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
"UMask": "0x01",
"Unit": "IIO"
},
{
- "BriefDescription": "Write request of 4 bytes made to IIO Part2 by the CPU ",
+ "BriefDescription": "Write request of 4 bytes made to IIO Part2 by the CPU",
"Counter": "2,3",
"EventCode": "0xC0",
"EventName": "UNC_IIO_DATA_REQ_BY_CPU.MEM_WRITE.PART2",
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x04",
- "PublicDescription": "Counts every write request of 4 bytes of data made to the MMIO space of a card on IIO Part2 by a unit on the main die (generally a core). In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every write request of 4 bytes of data made to the MMIO space of a card on IIO Part2 by a unit on the main die (generally a core) or by another IIO unit. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
"UMask": "0x01",
"Unit": "IIO"
},
{
- "BriefDescription": "Write request of 4 bytes made to IIO Part3 by the CPU ",
+ "BriefDescription": "Write request of 4 bytes made to IIO Part3 by the CPU",
"Counter": "2,3",
"EventCode": "0xC0",
"EventName": "UNC_IIO_DATA_REQ_BY_CPU.MEM_WRITE.PART3",
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x08",
- "PublicDescription": "Counts every write request of 4 bytes of data made to the MMIO space of a card on IIO Part3 by a unit on the main die (generally a core). In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every write request of 4 bytes of data made to the MMIO space of a card on IIO Part3 by a unit on the main die (generally a core) or by another IIO unit. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
"UMask": "0x01",
"Unit": "IIO"
},
{
+ "BriefDescription": "Peer to peer read request for 4 bytes made by a different IIO unit to IIO Part0",
+ "Counter": "2,3",
+ "EventCode": "0xC0",
+ "EventName": "UNC_IIO_DATA_REQ_BY_CPU.PEER_READ.PART0",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x01",
+ "PublicDescription": "Counts ever peer to peer read request for 4 bytes of data made by a different IIO unit to the MMIO space of a card on IIO Part0. Does not include requests made by the same IIO unit. In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer read request for 4 bytes made by a different IIO unit to IIO Part1",
+ "Counter": "2,3",
+ "EventCode": "0xC0",
+ "EventName": "UNC_IIO_DATA_REQ_BY_CPU.PEER_READ.PART1",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x02",
+ "PublicDescription": "Counts ever peer to peer read request for 4 bytes of data made by a different IIO unit to the MMIO space of a card on IIO Part1. Does not include requests made by the same IIO unit. In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer read request for 4 bytes made by a different IIO unit to IIO Part2",
+ "Counter": "2,3",
+ "EventCode": "0xC0",
+ "EventName": "UNC_IIO_DATA_REQ_BY_CPU.PEER_READ.PART2",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x04",
+ "PublicDescription": "Counts ever peer to peer read request for 4 bytes of data made by a different IIO unit to the MMIO space of a card on IIO Part2. Does not include requests made by the same IIO unit. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer read request for 4 bytes made by a different IIO unit to IIO Part3",
+ "Counter": "2,3",
+ "EventCode": "0xC0",
+ "EventName": "UNC_IIO_DATA_REQ_BY_CPU.PEER_READ.PART3",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x08",
+ "PublicDescription": "Counts ever peer to peer read request for 4 bytes of data made by a different IIO unit to the MMIO space of a card on IIO Part3. Does not include requests made by the same IIO unit. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of 4 bytes made to IIO Part0 by a different IIO unit",
+ "Counter": "2,3",
+ "EventCode": "0xC0",
+ "EventName": "UNC_IIO_DATA_REQ_BY_CPU.PEER_WRITE.PART0",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x01",
+ "PublicDescription": "Counts every peer to peer write request of 4 bytes of data made to the MMIO space of a card on IIO Part0 by a different IIO unit. Does not include requests made by the same IIO unit. In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of 4 bytes made to IIO Part1 by a different IIO unit",
+ "Counter": "2,3",
+ "EventCode": "0xC0",
+ "EventName": "UNC_IIO_DATA_REQ_BY_CPU.PEER_WRITE.PART1",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x02",
+ "PublicDescription": "Counts every peer to peer write request of 4 bytes of data made to the MMIO space of a card on IIO Part1 by a different IIO unit. Does not include requests made by the same IIO unit. In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of 4 bytes made to IIO Part2 by a different IIO unit",
+ "Counter": "2,3",
+ "EventCode": "0xC0",
+ "EventName": "UNC_IIO_DATA_REQ_BY_CPU.PEER_WRITE.PART2",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x04",
+ "PublicDescription": "Counts every peer to peer write request of 4 bytes of data made to the MMIO space of a card on IIO Part2 by a different IIO unit. Does not include requests made by the same IIO unit. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of 4 bytes made to IIO Part3 by a different IIO unit",
+ "Counter": "2,3",
+ "EventCode": "0xC0",
+ "EventName": "UNC_IIO_DATA_REQ_BY_CPU.PEER_WRITE.PART3",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x08",
+ "PublicDescription": "Counts every peer to peer write request of 4 bytes of data made to the MMIO space of a card on IIO Part3 by a different IIO unit. Does not include requests made by the same IIO unit. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer read request for 4 bytes made by IIO Part0 to an IIO target",
+ "Counter": "0,1",
+ "EventCode": "0x83",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.PEER_READ.PART0",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x01",
+ "PublicDescription": "Counts every peer to peer read request for 4 bytes of data made by IIO Part0 to the MMIO space of an IIO target. In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer read request for 4 bytes made by IIO Part1 to an IIO target",
+ "Counter": "0,1",
+ "EventCode": "0x83",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.PEER_READ.PART1",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x02",
+ "PublicDescription": "Counts every peer to peer read request for 4 bytes of data made by IIO Part1 to the MMIO space of an IIO target. In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer read request for 4 bytes made by IIO Part2 to an IIO target",
+ "Counter": "0,1",
+ "EventCode": "0x83",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.PEER_READ.PART2",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x04",
+ "PublicDescription": "Counts every peer to peer read request for 4 bytes of data made by IIO Part2 to the MMIO space of an IIO target. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer read request for 4 bytes made by IIO Part3 to an IIO target",
+ "Counter": "0,1",
+ "EventCode": "0x83",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.PEER_READ.PART3",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x08",
+ "PublicDescription": "Counts every peer to peer read request for 4 bytes of data made by IIO Part3 to the MMIO space of an IIO target. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of 4 bytes made by IIO Part0 to an IIO target",
+ "Counter": "0,1",
+ "EventCode": "0x83",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.PEER_WRITE.PART0",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x01",
+ "PublicDescription": "Counts every peer to peer write request of 4 bytes of data made by IIO Part0 to the MMIO space of an IIO target. In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of 4 bytes made by IIO Part0 to an IIO target",
+ "Counter": "0,1",
+ "EventCode": "0x83",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.PEER_WRITE.PART1",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x02",
+ "PublicDescription": "Counts every peer to peer write request of 4 bytes of data made by IIO Part1 to the MMIO space of an IIO target. In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of 4 bytes made by IIO Part0 to an IIO target",
+ "Counter": "0,1",
+ "EventCode": "0x83",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.PEER_WRITE.PART2",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x04",
+ "PublicDescription": "Counts every peer to peer write request of 4 bytes of data made by IIO Part2 to the MMIO space of an IIO target. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of 4 bytes made by IIO Part0 to an IIO target",
+ "Counter": "0,1",
+ "EventCode": "0x83",
+ "EventName": "UNC_IIO_DATA_REQ_OF_CPU.PEER_WRITE.PART3",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x08",
+ "PublicDescription": "Counts every peer to peer write request of 4 bytes of data made by IIO Part3 to the MMIO space of an IIO target. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
"BriefDescription": "Read request for up to a 64 byte transaction is made by the CPU to IIO Part0",
"Counter": "0,1,2,3",
"EventCode": "0xC1",
@@ -545,7 +925,7 @@
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x01",
- "PublicDescription": "Counts every read request for up to a 64 byte transaction of data made by a unit on the main die (generally a core) to the MMIO space of a card on IIO Part0. In the general case, part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every read request for up to a 64 byte transaction of data made by a unit on the main die (generally a core) or by another IIO unit to the MMIO space of a card on IIO Part0. In the general case, part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
"UMask": "0x04",
"Unit": "IIO"
},
@@ -557,7 +937,7 @@
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x02",
- "PublicDescription": "Counts every read request for up to a 64 byte transaction of data made by a unit on the main die (generally a core) to the MMIO space of a card on IIO Part1. In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every read request for up to a 64 byte transaction of data made by a unit on the main die (generally a core) or by another IIO unit to the MMIO space of a card on IIO Part1. In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
"UMask": "0x04",
"Unit": "IIO"
},
@@ -569,7 +949,7 @@
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x04",
- "PublicDescription": "Counts every read request for up to a 64 byte transaction of data made by a unit on the main die (generally a core) to the MMIO space of a card on IIO Part2. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every read request for up to a 64 byte transaction of data made by a unit on the main die (generally a core) or by another IIO unit to the MMIO space of a card on IIO Part2. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
"UMask": "0x04",
"Unit": "IIO"
},
@@ -581,7 +961,7 @@
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x08",
- "PublicDescription": "Counts every read request for up to a 64 byte transaction of data made by a unit on the main die (generally a core) to the MMIO space of a card on IIO Part3. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every read request for up to a 64 byte transaction of data made by a unit on the main die (generally a core) or by another IIO unit to the MMIO space of a card on IIO Part3. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
"UMask": "0x04",
"Unit": "IIO"
},
@@ -593,7 +973,7 @@
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x01",
- "PublicDescription": "Counts every write request of up to a 64 byte transaction of data made to the MMIO space of a card on IIO Part0 by a unit on the main die (generally a core). In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every write request of up to a 64 byte transaction of data made to the MMIO space of a card on IIO Part0 by a unit on the main die (generally a core) or by another IIO unit. In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
"UMask": "0x01",
"Unit": "IIO"
},
@@ -605,35 +985,131 @@
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x02",
- "PublicDescription": "Counts every write request of up to a 64 byte transaction of data made to the MMIO space of a card on IIO Part1 by a unit on the main die (generally a core). In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every write request of up to a 64 byte transaction of data made to the MMIO space of a card on IIO Part1 by a unit on the main die (generally a core) or by another IIO unit. In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
"UMask": "0x01",
"Unit": "IIO"
},
{
- "BriefDescription": "Write request of up to a 64 byte transaction is made to IIO Part2 by the CPU ",
+ "BriefDescription": "Write request of up to a 64 byte transaction is made to IIO Part2 by the CPU",
"Counter": "0,1,2,3",
"EventCode": "0xC1",
"EventName": "UNC_IIO_TXN_REQ_BY_CPU.MEM_WRITE.PART2",
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x04",
- "PublicDescription": "Counts every write request of up to a 64 byte transaction of data made to the MMIO space of a card on IIO Part2 by a unit on the main die (generally a core). In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every write request of up to a 64 byte transaction of data made to the MMIO space of a card on IIO Part2 by a unit on the main die (generally a core) or by another IIO unit. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
"UMask": "0x01",
"Unit": "IIO"
},
{
- "BriefDescription": "Write request of up to a 64 byte transaction is made to IIO Part3 by the CPU ",
+ "BriefDescription": "Write request of up to a 64 byte transaction is made to IIO Part3 by the CPU",
"Counter": "0,1,2,3",
"EventCode": "0xC1",
"EventName": "UNC_IIO_TXN_REQ_BY_CPU.MEM_WRITE.PART3",
"FCMask": "0x07",
"PerPkg": "1",
"PortMask": "0x08",
- "PublicDescription": "Counts every write request of up to a 64 byte transaction of data made to the MMIO space of a card on IIO Part3 by a unit on the main die (generally a core). In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
+ "PublicDescription": "Counts every write request of up to a 64 byte transaction of data made to the MMIO space of a card on IIO Part3 by a unit on the main die (generally a core) or by another IIO unit. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
"UMask": "0x01",
"Unit": "IIO"
},
{
+ "BriefDescription": "Peer to peer read request for up to a 64 byte transaction is made by a different IIO unit to IIO Part0",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC1",
+ "EventName": "UNC_IIO_TXN_REQ_BY_CPU.PEER_READ.PART0",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x01",
+ "PublicDescription": "Counts every peer to peer read request for up to a 64 byte transaction of data made by a different IIO unit to the MMIO space of a card on IIO Part0. Does not include requests made by the same IIO unit. In the general case, part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer read request for up to a 64 byte transaction is made by a different IIO unit to IIO Part1",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC1",
+ "EventName": "UNC_IIO_TXN_REQ_BY_CPU.PEER_READ.PART1",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x02",
+ "PublicDescription": "Counts every peer to peer read request for up to a 64 byte transaction of data made by a different IIO unit to the MMIO space of a card on IIO Part1. Does not include requests made by the same IIO unit. In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer read request for up to a 64 byte transaction is made by a different IIO unit to IIO Part2",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC1",
+ "EventName": "UNC_IIO_TXN_REQ_BY_CPU.PEER_READ.PART2",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x04",
+ "PublicDescription": "Counts every peer to peer read request for up to a 64 byte transaction of data made by a different IIO unit to the MMIO space of a card on IIO Part2. Does not include requests made by the same IIO unit. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer read request for up to a 64 byte transaction is made by a different IIO unit to IIO Part3",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC1",
+ "EventName": "UNC_IIO_TXN_REQ_BY_CPU.PEER_READ.PART3",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x08",
+ "PublicDescription": "Counts every peer to peer read request for up to a 64 byte transaction of data made by a different IIO unit to the MMIO space of a card on IIO Part3. Does not include requests made by the same IIO unit. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of up to a 64 byte transaction is made to IIO Part0 by a different IIO unit",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC1",
+ "EventName": "UNC_IIO_TXN_REQ_BY_CPU.PEER_WRITE.PART0",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x01",
+ "PublicDescription": "Counts every peer to peer write request of up to a 64 byte transaction of data made to the MMIO space of a card on IIO Part0 by a different IIO unit. Does not include requests made by the same IIO unit. In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of up to a 64 byte transaction is made to IIO Part1 by a different IIO unit",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC1",
+ "EventName": "UNC_IIO_TXN_REQ_BY_CPU.PEER_WRITE.PART1",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x02",
+ "PublicDescription": "Counts every peer to peer write request of up to a 64 byte transaction of data made to the MMIO space of a card on IIO Part1 by a different IIO unit. Does not include requests made by the same IIO unit. In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of up to a 64 byte transaction is made to IIO Part2 by a different IIO unit",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC1",
+ "EventName": "UNC_IIO_TXN_REQ_BY_CPU.PEER_WRITE.PART2",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x04",
+ "PublicDescription": "Counts every peer to peer write request of up to a 64 byte transaction of data made to the MMIO space of a card on IIO Part2 by a different IIO unit. Does not include requests made by the same IIO unit. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of up to a 64 byte transaction is made to IIO Part3 by a different IIO unit",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xC1",
+ "EventName": "UNC_IIO_TXN_REQ_BY_CPU.PEER_WRITE.PART3",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x08",
+ "PublicDescription": "Counts every peer to peer write request of up to a 64 byte transaction of data made to the MMIO space of a card on IIO Part3 by a different IIO unit. Does not include requests made by the same IIO unit. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
"BriefDescription": "Read request for up to a 64 byte transaction is made by IIO Part0 to Memory",
"Counter": "0,1,2,3",
"EventCode": "0x84",
@@ -730,6 +1206,160 @@
"Unit": "IIO"
},
{
+ "BriefDescription": "Peer to peer read request of up to a 64 byte transaction is made by IIO Part0 to an IIO target",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x84",
+ "EventName": "UNC_IIO_TXN_REQ_OF_CPU.PEER_READ.PART0",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x01",
+ "PublicDescription": "Counts every peer to peer read request of up to a 64 byte transaction made by IIO Part0 to the MMIO space of an IIO target. In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer read request of up to a 64 byte transaction is made by IIO Part1 to an IIO target",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x84",
+ "EventName": "UNC_IIO_TXN_REQ_OF_CPU.PEER_READ.PART1",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x02",
+ "PublicDescription": "Counts every peer to peer read request of up to a 64 byte transaction made by IIO Part1 to the MMIO space of an IIO target. In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer read request of up to a 64 byte transaction is made by IIO Part2 to an IIO target",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x84",
+ "EventName": "UNC_IIO_TXN_REQ_OF_CPU.PEER_READ.PART2",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x04",
+ "PublicDescription": "Counts every peer to peer read request of up to a 64 byte transaction made by IIO Part2 to the MMIO space of an IIO target. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer read request of up to a 64 byte transaction is made by IIO Part3 to an IIO target",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x84",
+ "EventName": "UNC_IIO_TXN_REQ_OF_CPU.PEER_READ.PART3",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x08",
+ "PublicDescription": "Counts every peer to peer read request of up to a 64 byte transaction made by IIO Part3 to the MMIO space of an IIO target. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
+ "UMask": "0x08",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of up to a 64 byte transaction is made by IIO Part0 to an IIO target",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x84",
+ "EventName": "UNC_IIO_TXN_REQ_OF_CPU.PEER_WRITE.PART0",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x01",
+ "PublicDescription": "Counts every peer to peer write request of up to a 64 byte transaction of data made by IIO Part0 to the MMIO space of an IIO target. In the general case, Part0 refers to a standard PCIe card of any size (x16,x8,x4) that is plugged directly into one of the PCIe slots. Part0 could also refer to any device plugged into the first slot of a PCIe riser card or to a device attached to the IIO unit which starts its use of the bus using lane 0 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of up to a 64 byte transaction is made by IIO Part1 to an IIO target",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x84",
+ "EventName": "UNC_IIO_TXN_REQ_OF_CPU.PEER_WRITE.PART1",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x02",
+ "PublicDescription": "Counts every peer to peer write request of up to a 64 byte transaction of data made by IIO Part1 to the MMIO space of an IIO target.In the general case, Part1 refers to a x4 PCIe card plugged into the second slot of a PCIe riser card, but it could refer to any x4 device attached to the IIO unit using lanes starting at lane 4 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of up to a 64 byte transaction is made by IIO Part2 to an IIO target",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x84",
+ "EventName": "UNC_IIO_TXN_REQ_OF_CPU.PEER_WRITE.PART2",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x04",
+ "PublicDescription": "Counts every peer to peer write request of up to a 64 byte transaction of data made by IIO Part2 to the MMIO space of an IIO target. In the general case, Part2 refers to a x4 or x8 PCIe card plugged into the third slot of a PCIe riser card, but it could refer to any x4 or x8 device attached to the IIO unit and using lanes starting at lane 8 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Peer to peer write request of up to a 64 byte transaction is made by IIO Part3 to an IIO target",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x84",
+ "EventName": "UNC_IIO_TXN_REQ_OF_CPU.PEER_WRITE.PART3",
+ "FCMask": "0x07",
+ "PerPkg": "1",
+ "PortMask": "0x08",
+ "PublicDescription": "Counts every peer to peer write request of up to a 64 byte transaction of data made by IIO Part3 to the MMIO space of an IIO target. In the general case, Part3 refers to a x4 PCIe card plugged into the fourth slot of a PCIe riser card, but it could brefer to any device attached to the IIO unit using the lanes starting at lane 12 of the 16 lanes supported by the bus.",
+ "UMask": "0x02",
+ "Unit": "IIO"
+ },
+ {
+ "BriefDescription": "Total IRP occupancy of inbound read and write requests.",
+ "Counter": "0,1",
+ "EventCode": "0xF",
+ "EventName": "UNC_I_CACHE_TOTAL_OCCUPANCY.MEM",
+ "PerPkg": "1",
+ "PublicDescription": "Total IRP occupancy of inbound read and write requests. This is effectively the sum of read occupancy and write occupancy.",
+ "UMask": "0x4",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "PCIITOM request issued by the IRP unit to the mesh with the intention of writing a full cacheline.",
+ "Counter": "0,1",
+ "EventCode": "0x10",
+ "EventName": "UNC_I_COHERENT_OPS.PCITOM",
+ "PerPkg": "1",
+ "PublicDescription": "PCIITOM request issued by the IRP unit to the mesh with the intention of writing a full cacheline to coherent memory, without a RFO. PCIITOM is a speculative Invalidate to Modified command that requests ownership of the cacheline and does not move data from the mesh to IRP cache.",
+ "UMask": "0x10",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "RFO request issued by the IRP unit to the mesh with the intention of writing a partial cacheline.",
+ "Counter": "0,1",
+ "EventCode": "0x10",
+ "EventName": "UNC_I_COHERENT_OPS.RFO",
+ "PerPkg": "1",
+ "PublicDescription": "RFO request issued by the IRP unit to the mesh with the intention of writing a partial cacheline to coherent memory. RFO is a Read For Ownership command that requests ownership of the cacheline and moves data from the mesh to IRP cache.",
+ "UMask": "0x8",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Inbound read requests received by the IRP and inserted into the FAF queue.",
+ "Counter": "0,1",
+ "EventCode": "0x18",
+ "EventName": "UNC_I_FAF_INSERTS",
+ "PerPkg": "1",
+ "PublicDescription": "Inbound read requests to coherent memory, received by the IRP and inserted into the Fire and Forget queue (FAF), a queue used for processing inbound reads in the IRP.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Occupancy of the IRP FAF queue.",
+ "Counter": "0,1",
+ "EventCode": "0x19",
+ "EventName": "UNC_I_FAF_OCCUPANCY",
+ "PerPkg": "1",
+ "PublicDescription": "Occupancy of the IRP Fire and Forget (FAF) queue, a queue used for processing inbound reads in the IRP.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Inbound write (fast path) requests received by the IRP.",
+ "Counter": "0,1",
+ "EventCode": "0x11",
+ "EventName": "UNC_I_TRANSACTIONS.WR_PREF",
+ "PerPkg": "1",
+ "PublicDescription": "Inbound write (fast path) requests to coherent memory, received by the IRP resulting in write ownership requests issued by IRP to the mesh.",
+ "UMask": "0x8",
+ "Unit": "IRP"
+ },
+ {
"BriefDescription": "Traffic in which the M2M to iMC Bypass was not taken",
"Counter": "0,1,2,3",
"EventCode": "0x22",
@@ -813,7 +1443,7 @@
"Unit": "M2M"
},
{
- "BriefDescription": "Multi-socket cacheline Directory lookups (cacheline found in A state) ",
+ "BriefDescription": "Multi-socket cacheline Directory lookups (cacheline found in A state)",
"Counter": "0,1,2,3",
"EventCode": "0x2D",
"EventName": "UNC_M2M_DIRECTORY_LOOKUP.STATE_A",
@@ -823,7 +1453,7 @@
"Unit": "M2M"
},
{
- "BriefDescription": "Multi-socket cacheline Directory lookup (cacheline found in I state) ",
+ "BriefDescription": "Multi-socket cacheline Directory lookup (cacheline found in I state)",
"Counter": "0,1,2,3",
"EventCode": "0x2D",
"EventName": "UNC_M2M_DIRECTORY_LOOKUP.STATE_I",
@@ -833,7 +1463,7 @@
"Unit": "M2M"
},
{
- "BriefDescription": "Multi-socket cacheline Directory lookup (cacheline found in S state) ",
+ "BriefDescription": "Multi-socket cacheline Directory lookup (cacheline found in S state)",
"Counter": "0,1,2,3",
"EventCode": "0x2D",
"EventName": "UNC_M2M_DIRECTORY_LOOKUP.STATE_S",
@@ -863,7 +1493,7 @@
"Unit": "M2M"
},
{
- "BriefDescription": "Multi-socket cacheline Directory update from/to Any state ",
+ "BriefDescription": "Multi-socket cacheline Directory update from/to Any state",
"Counter": "0,1,2,3",
"EventCode": "0x2E",
"EventName": "UNC_M2M_DIRECTORY_UPDATE.ANY",
@@ -918,7 +1548,7 @@
"EventCode": "0x37",
"EventName": "UNC_M2M_IMC_READS.ALL",
"PerPkg": "1",
- "PublicDescription": "Counts when the M2M (Mesh to Memory) issues reads to the iMC (Memory Controller). ",
+ "PublicDescription": "Counts when the M2M (Mesh to Memory) issues reads to the iMC (Memory Controller).",
"UMask": "0x4",
"Unit": "M2M"
},
@@ -943,6 +1573,16 @@
"Unit": "M2M"
},
{
+ "BriefDescription": "M2M Writes Issued to iMC; All, regardless of priority.",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x38",
+ "EventName": "UNC_M2M_IMC_WRITES.NI",
+ "PerPkg": "1",
+ "PublicDescription": "M2M Writes Issued to iMC; All, regardless of priority.",
+ "UMask": "0x80",
+ "Unit": "M2M"
+ },
+ {
"BriefDescription": "Partial Non-Isochronous writes to the iMC",
"Counter": "0,1,2,3",
"EventCode": "0x38",
@@ -967,7 +1607,7 @@
"EventCode": "0x57",
"EventName": "UNC_M2M_PREFCAM_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts when the M2M (Mesh to Memory) receives a prefetch request and inserts it into its outstanding prefetch queue. Explanatory Side Note: the prefect queue is made from CAM: Content Addressable Memory",
+ "PublicDescription": "Counts when the M2M (Mesh to Memory) recieves a prefetch request and inserts it into its outstanding prefetch queue. Explanatory Side Note: the prefect queue is made from CAM: Content Addressable Memory",
"Unit": "M2M"
},
{
@@ -976,12 +1616,77 @@
"EventCode": "0x1",
"EventName": "UNC_M2M_RxC_AD_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts when the a new entry is Received(RxC) and then added to the AD (Address Ring) Ingress Queue from the CMS (Common Mesh Stop). This is generally used for reads, and ",
+ "PublicDescription": "Counts when the a new entry is Received(RxC) and then added to the AD (Address Ring) Ingress Queue from the CMS (Common Mesh Stop). This is generally used for reads, and",
"Unit": "M2M"
},
{
- "BriefDescription": "Prefetches generated by the flow control queue of the M3UPI unit.",
+ "BriefDescription": "AD Ingress (from CMS) Occupancy",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x2",
+ "EventName": "UNC_M2M_RxC_AD_OCCUPANCY",
+ "PerPkg": "1",
+ "PublicDescription": "AD Ingress (from CMS) Occupancy",
+ "Unit": "M2M"
+ },
+ {
+ "BriefDescription": "BL Ingress (from CMS) Allocations",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x5",
+ "EventName": "UNC_M2M_RxC_BL_INSERTS",
+ "PerPkg": "1",
+ "PublicDescription": "BL Ingress (from CMS) Allocations",
+ "Unit": "M2M"
+ },
+ {
+ "BriefDescription": "BL Ingress (from CMS) Occupancy",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x6",
+ "EventName": "UNC_M2M_RxC_BL_OCCUPANCY",
+ "PerPkg": "1",
+ "PublicDescription": "BL Ingress (from CMS) Occupancy",
+ "Unit": "M2M"
+ },
+ {
+ "BriefDescription": "AD Egress (to CMS) Allocations",
"Counter": "0,1,2,3",
+ "EventCode": "0x9",
+ "EventName": "UNC_M2M_TxC_AD_INSERTS",
+ "PerPkg": "1",
+ "PublicDescription": "AD Egress (to CMS) Allocations",
+ "Unit": "M2M"
+ },
+ {
+ "BriefDescription": "AD Egress (to CMS) Occupancy",
+ "Counter": "0,1,2,3",
+ "EventCode": "0xA",
+ "EventName": "UNC_M2M_TxC_AD_OCCUPANCY",
+ "PerPkg": "1",
+ "PublicDescription": "AD Egress (to CMS) Occupancy",
+ "Unit": "M2M"
+ },
+ {
+ "BriefDescription": "BL Egress (to CMS) Allocations; All",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x15",
+ "EventName": "UNC_M2M_TxC_BL_INSERTS.ALL",
+ "PerPkg": "1",
+ "PublicDescription": "BL Egress (to CMS) Allocations; All",
+ "UMask": "0x03",
+ "Unit": "M2M"
+ },
+ {
+ "BriefDescription": "BL Egress (to CMS) Occupancy; All",
+ "Counter": "0,1,2,3",
+ "EventCode": "0x16",
+ "EventName": "UNC_M2M_TxC_BL_OCCUPANCY.ALL",
+ "PerPkg": "1",
+ "PublicDescription": "BL Egress (to CMS) Occupancy; All",
+ "UMask": "0x03",
+ "Unit": "M2M"
+ },
+ {
+ "BriefDescription": "Prefetches generated by the flow control queue of the M3UPI unit.",
+ "Counter": "0,1,2",
"EventCode": "0x29",
"EventName": "UNC_M3UPI_UPI_PREFETCH_SPAWN",
"PerPkg": "1",
@@ -1041,7 +1746,7 @@
"EventCode": "0x31",
"EventName": "UNC_UPI_RxL_BYPASSED.SLOT0",
"PerPkg": "1",
- "PublicDescription": "Counts incoming FLITs (FLow control unITs) which bypassed the slot0 RxQ buffer (Receive Queue) and passed directly to the Egress. This is a latency optimization, and should generally be the common case. If this value is less than the number of FLITs transferred, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
+ "PublicDescription": "Counts incoming FLITs (FLow control unITs) which bypassed the slot0 RxQ buffer (Receive Queue) and passed directly to the Egress. This is a latency optimization, and should generally be the common case. If this value is less than the number of FLITs transfered, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
"UMask": "0x1",
"Unit": "UPI LL"
},
@@ -1051,17 +1756,17 @@
"EventCode": "0x31",
"EventName": "UNC_UPI_RxL_BYPASSED.SLOT1",
"PerPkg": "1",
- "PublicDescription": "Counts incoming FLITs (FLow control unITs) which bypassed the slot1 RxQ buffer (Receive Queue) and passed directly across the BGF and into the Egress. This is a latency optimization, and should generally be the common case. If this value is less than the number of FLITs transferred, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
+ "PublicDescription": "Counts incoming FLITs (FLow control unITs) which bypassed the slot1 RxQ buffer (Receive Queue) and passed directly across the BGF and into the Egress. This is a latency optimization, and should generally be the common case. If this value is less than the number of FLITs transfered, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
"UMask": "0x2",
"Unit": "UPI LL"
},
{
- "BriefDescription": "FLITs received which bypassed the Slot0 Receive Buffer",
+ "BriefDescription": "FLITs received which bypassed the Slot0 Recieve Buffer",
"Counter": "0,1,2,3",
"EventCode": "0x31",
"EventName": "UNC_UPI_RxL_BYPASSED.SLOT2",
"PerPkg": "1",
- "PublicDescription": "Counts incoming FLITs (FLow control unITs) which bypassed the slot2 RxQ buffer (Receive Queue) and passed directly to the Egress. This is a latency optimization, and should generally be the common case. If this value is less than the number of FLITs transferred, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
+ "PublicDescription": "Counts incoming FLITs (FLow control unITs) whcih bypassed the slot2 RxQ buffer (Receive Queue) and passed directly to the Egress. This is a latency optimization, and should generally be the common case. If this value is less than the number of FLITs transfered, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
"UMask": "0x4",
"Unit": "UPI LL"
},
@@ -1114,23 +1819,23 @@
"Unit": "UPI LL"
},
{
- "BriefDescription": "UPI interconnect send bandwidth for payload. Derived from unc_upi_txl_flits.all_data",
+ "BriefDescription": "Null FLITs transmitted from any slot",
"Counter": "0,1,2,3",
"EventCode": "0x2",
- "EventName": "UPI_DATA_BANDWIDTH_TX",
+ "EventName": "UNC_UPI_TxL_FLITS.ALL_NULL",
"PerPkg": "1",
- "ScaleUnit": "7.11E-06Bytes",
- "UMask": "0x0F",
+ "PublicDescription": "Counts null FLITs (80 bit FLow control unITs) transmitted via any of the 3 Intel Ulra Path Interconnect (UPI) slots on this UPI unit.",
+ "UMask": "0x27",
"Unit": "UPI LL"
},
{
- "BriefDescription": "Null FLITs transmitted from any slot",
+ "BriefDescription": "Valid Flits Sent; Data",
"Counter": "0,1,2,3",
"EventCode": "0x2",
- "EventName": "UNC_UPI_TxL_FLITS.ALL_NULL",
+ "EventName": "UNC_UPI_TxL_FLITS.DATA",
"PerPkg": "1",
- "PublicDescription": "Counts null FLITs (80 bit FLow control unITs) transmitted via any of the 3 Intel Ulra Path Interconnect (UPI) slots on this UPI unit.",
- "UMask": "0x27",
+ "PublicDescription": "Shows legal flit time (hides impact of L0p and L0c).; Count Data Flits (which consume all slots), but how much to count is based on Slot0-2 mask, so count can be 0-3 depending on which slots are enabled for counting..",
+ "UMask": "0x8",
"Unit": "UPI LL"
},
{