diff options
Diffstat (limited to 'lib/libsys/socket.2')
| -rw-r--r-- | lib/libsys/socket.2 | 302 |
1 files changed, 214 insertions, 88 deletions
diff --git a/lib/libsys/socket.2 b/lib/libsys/socket.2 index b211611c6354..48b8f4e87489 100644 --- a/lib/libsys/socket.2 +++ b/lib/libsys/socket.2 @@ -25,7 +25,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd May 17, 2025 +.Dd September 28, 2025 .Dt SOCKET 2 .Os .Sh NAME @@ -64,7 +64,7 @@ PF_NETGRAPH Netgraph sockets, PF_NETLINK Netlink protocols, PF_BLUETOOTH Bluetooth protocols, PF_INET_SDP OFED socket direct protocol (IPv4), -AF_HYPERV HyperV sockets +PF_HYPERV HyperV sockets .Ed .Pp Each protocol family is connected to an address family, which has the @@ -89,32 +89,6 @@ SOCK_RAW Raw-protocol interface, SOCK_SEQPACKET Sequenced packet stream .Ed .Pp -A -.Dv SOCK_STREAM -type provides sequenced, reliable, -two-way connection based byte streams. -An out-of-band data transmission mechanism may be supported. -A -.Dv SOCK_DGRAM -socket supports -datagrams (connectionless, unreliable messages of -a fixed (typically small) maximum length). -A -.Dv SOCK_SEQPACKET -socket may provide a sequenced, reliable, -two-way connection-based data transmission path for datagrams -of fixed maximum length; a consumer may be required to read -an entire packet with each read system call. -This facility may have protocol-specific properties. -.Dv SOCK_RAW -sockets provide access to internal network protocols and interfaces. -The -.Dv SOCK_RAW -type is available only to the super-user and is described in -.Xr ip 4 -and -.Xr ip6 4 . -.Pp Additionally, the following flags are allowed in the .Fa type argument: @@ -140,32 +114,23 @@ particular to the in which communication is to take place; see .Xr protocols 5 . -.Pp The .Fa protocol argument may be set to zero (0) to request the default implementation of a socket type for the protocol, if any. -.Pp -Sockets of type +.Sh STREAM SOCKET TYPE +The +.Dv SOCK_STREAM +socket type provides reliable, sequenced, full-duplex octet streams between +the socket and a peer to which the socket is connected. +A socket of type .Dv SOCK_STREAM -are full-duplex byte streams, similar -to pipes. -A stream socket must be in a +needs to be in a .Em connected -state before any data may be sent or received -on it. +state before any data can be sent or received. A connection to another socket is created with a .Xr connect 2 system call. -Once connected, data may be transferred using -.Xr read 2 -and -.Xr write 2 -calls or some variant of the -.Xr send 2 -and -.Xr recv 2 -functions. (Some protocol families, such as the Internet family, support the notion of an .Dq implied connect , @@ -173,62 +138,210 @@ which permits data to be sent piggybacked onto a connect operation by using the .Xr sendto 2 system call.) -When a session has been completed a -.Xr close 2 -may be performed. -Out-of-band data may also be transmitted as described in +Once connected, data may be sent using +.Xr send 2 , +.Xr sendto 2 , +.Xr sendmsg 2 +and +.Xr write 2 +system calls. +Data may be received using +.Xr recv 2 , +.Xr recvfrom 2 , +.Xr recvmsg 2 , +and +.Xr read 2 +system calls. +Record boundaries are not maintained; data sent on a stream socket using output +operations of one size can be received using input operations of smaller or +larger sizes without loss of data. +Data may be buffered; successful return from an output function does not imply +that the data has been delivered to the peer or even transmitted from the local +system. +For certain protocols out-of-band data may also be transmitted as described in .Xr send 2 and received as described in .Xr recv 2 . .Pp -The communications protocols used to implement a -.Dv SOCK_STREAM -ensure that data -is not lost or duplicated. -If a piece of data for which the -peer protocol has buffer space cannot be successfully transmitted -within a reasonable length of time, then -the connection is considered broken and calls -will indicate an error with --1 returns and with -.Er ETIMEDOUT -as the specific code -in the global variable -.Va errno . -The protocols optionally keep sockets -.Dq warm -by forcing transmissions -roughly every minute in the absence of other activity. -An error is then indicated if no response can be -elicited on an otherwise -idle connection for an extended period (e.g.\& 5 minutes). -By default, a +If data cannot be successfully transmitted within a given time then the +connection is considered broken, and subsequent operations shall fail with +a protocol specific error code. +A .Dv SIGPIPE -signal is raised if a process sends -on a broken stream, but this behavior may be inhibited via +signal is raised if a thread attempts to send data on a broken stream (one that +is no longer connected). +The signal can be suppressed by the +.Dv MSG_NOSIGNAL +flag with distinct +.Xr send 2 , +.Xr sendto 2 , +and +.Xr sendmsg 2 +system calls or by the +.Dv SO_NOSIGPIPE +socket option set on the socket with .Xr setsockopt 2 . .Pp -.Dv SOCK_SEQPACKET -sockets employ the same system calls -as +The .Dv SOCK_STREAM -sockets. -The only difference -is that -.Xr read 2 -calls will return only the amount of data requested, -and any remaining in the arriving packet will be discarded. +socket is supported by the following protocol families: +.Dv PF_INET , +.Dv PF_INET6 , +.Dv PF_UNIX , +.Dv PF_BLUETOOTH , +.Dv PF_HYPERV , +and +.Dv PF_INET_SDP . +Out-of-band data transmission mechanism is supported for stream sockets of +.Dv PF_INET +and +.Dv PF_INET6 +protocol families. +.Sh DATAGRAM SOCKET TYPE +The +.Dv SOCK_DGRAM +socket type supports connectionless data transfer which is not necessarily +acknowledged or reliable. +Datagrams can be sent to the address specified (possibly multicast or +broadcast) in each output operation, and incoming datagrams can be received +from multiple sources. +The source address of each datagram is available when receiving the datagram +with +.Xr recvfrom 2 +or +.Xr recvmsg 2 . +An application can also pre-specify a peer address with +.Xr sendto 2 +or +.Xr sendmsg 2 , +in which case calls to output functions that do not specify a peer address +shall send to the pre-specified peer. +If a peer has been specified, only datagrams from that peer shall be received. +A datagram shall be sent in a single output operation, and needs to be received +in a single input operation. +The maximum size of a datagram is protocol-specific. +Output datagrams may be buffered within the system; thus, a successful return +from an output function does not guarantee that a datagram is actually sent or +received. .Pp +The .Dv SOCK_DGRAM +socket is supported by the following protocol families: +.Dv PF_INET , +.Dv PF_INET6 , +.Dv PF_UNIX , +.Dv PF_NETGRAPH , and -.Dv SOCK_RAW -sockets allow sending of datagrams to correspondents -named in +.Dv PF_NETLINK . +.Sh SEQUENCED PACKET SOCKET TYPE +The +.Dv SOCK_SEQPACKET +socket type is similar to the +.Dv SOCK_STREAM +type, and is also connection-oriented. +The only difference between these types is that record boundaries are +maintained using the +.Dv SOCK_SEQPACKET +type. +A record can be sent using one or more output operations and received using one +or more input operations, but a single operation never transfers parts of more +than one record. +Record boundaries are set by the sender with the +.Dv MSG_EOR +flag of .Xr send 2 -calls. -Datagrams are generally received with +or +.Xr sendmsg 2 +functions. +There is no possibility to set a record boundary with +.Xr write 2 . +Record boundaries are visible to the receiver via the +.Dv MSG_EOR +flag in the received message flags returned by the +.Xr recvmsg 2 +function. +It is protocol-specific whether a maximum record size is imposed. +.Pp +The +.Dv SOCK_SEQPACKET +socket is supported by the following protocol families: +.Dv PF_INET , +.Dv PF_INET6 , +and +.Dv PF_UNIX . +.Pp +.Sh RAW SOCKET TYPE +The +.Dv SOCK_RAW +socket type provides access to internal network protocols and interfaces. +It is a datagram socket in its nature, thus has the same semantics of +read and write operations. +The +.Dv SOCK_RAW +type is available only to the super-user and is described in +.Xr ip 4 +and +.Xr ip6 4 . +.Sh NON-BLOCKING MODE +A socket can be created in +.Em non-blocking mode +with the help of +.Dv SOCK_NONBLOCK +flag. +Alternatively, the non-blocking mode on a socket can be turned on and off with +the help of the +.Dv O_NONBLOCK +flag of the +.Xr fcntl 2 +system call. +.Pp +When a non-blocking socket has not enough data in its receive buffer to fulfill +the application supplied buffer, then data receiving system calls like +.Xr recv 2 , .Xr recvfrom 2 , -which returns the next datagram with its return address. +.Xr recvmsg 2 +and +.Xr read 2 +will not block waiting for the data but immediately return. +Return value will indicate amount of bytes read into the supplied buffer. +The +.Va errno +will be set to +.Dv EAGAIN +.Po +has same value as +.Dv EWOULDBLOCK +.Pc . +.Pp +If application tries to send more data on a non-blocking socket than the socket +send buffer can accomodate with +.Xr send 2 , +.Xr sendto 2 , +.Xr sendmsg 2 +or +.Xr write 2 +system calls partial data will be sent. +Return value will indicate amount of bytes sent. +The +.Va errno +will be set to +.Dv EAGAIN . +Note that sockets of +.Dv SOCK_DGRAM +type are unreliable, thus for these sockets sending operations will never fail +with +.Dv EAGAIN +in non-blocking mode neither will block in blocking mode. +.Sh OTHER OPERATIONS ON SOCKETS +Since socket descriptors are file descriptors, many generic file operations +performed by +.Xr fcntl 2 , +apply. +Socket descriptors can be used with all event engines, such as +.Xr kevent 2 , +.Xr select 2 +and +.Xr poll 2 . .Pp An .Xr fcntl 2 @@ -250,6 +363,12 @@ The and .Xr getsockopt 2 system calls are used to set and get options, respectively. +.Pp +Connection associated with a socket can be terminated by +.Xr close 2 +system call. +One direction of communication can be disabled with +.Xr shutdown 2 . .Sh RETURN VALUES A -1 is returned if an error occurs, otherwise the return value is a descriptor referencing the socket. @@ -282,16 +401,23 @@ The socket type is not supported by the protocol. .Sh SEE ALSO .Xr accept 2 , .Xr bind 2 , +.Xr close 2 , .Xr connect 2 , +.Xr fcntl 2 , .Xr getpeername 2 , .Xr getsockname 2 , .Xr getsockopt 2 , .Xr ioctl 2 , +.Xr kevent 2 , .Xr listen 2 , +.Xr poll 2 , .Xr read 2 , .Xr recv 2 , .Xr select 2 , .Xr send 2 , +.Xr sendmsg 2 , +.Xr sendto 2 , +.Xr signal 3 , .Xr shutdown 2 , .Xr socketpair 2 , .Xr write 2 , |