1 files changed, 0 insertions, 330 deletions
diff --git a/sys/boot/forth/loader.conf.5 b/sys/boot/forth/loader.conf.5
deleted file mode 100644
index 631250c5278c..000000000000
--- a/sys/boot/forth/loader.conf.5
+++ /dev/null
@@ -1,330 +0,0 @@
-.\" Copyright (c) 1999 Daniel C. Sobral
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $FreeBSD$
-.Dd January 6, 2016
-.Dt LOADER.CONF 5
-.Os
-.Sh NAME
-.Nm loader.conf
-.Nd "system bootstrap configuration information"
-.Sh DESCRIPTION
-The file
-.Nm
-contains descriptive information on bootstrapping the system.
-Through
-it you can specify the kernel to be booted, parameters to be passed to
-it, and additional modules to be loaded; and generally set all variables
-described in
-.Xr loader 8 .
-.Pp
-The file
-.Pa /boot/loader.rc
-must contain the following two lines for
-.Nm
-to be automatically processed:
-.Pp
-.Dl include /boot/loader.4th
-.Dl start
-.Pp
-If no
-.Pa /boot/loader.rc
-exists at installworld time, one with the above lines will be installed.
-.Sh SYNTAX
-Though
-.Nm Ns 's
-format was defined explicitly to resemble
-.Xr rc.conf 5 ,
-and can be sourced by
-.Xr sh 1 ,
-some settings are treated in a special fashion.
-Also, the
-behavior of some settings is defined by the setting's suffix;
-the prefix identifies which module the setting controls.
-.Pp
-The general parsing rules are:
-.Bl -bullet
-.It
-Spaces and empty lines are ignored.
-.It
-A # sign will mark the remainder of the line as a comment.
-.It
-Only one setting can be present on each line.
-.El
-.Pp
-All settings have the following format:
-.Pp
-.Dl variable="value"
-.Pp
-Unless it belongs to one of the classes of settings that receive special
-treatment, a setting will set the value of a
-.Xr loader 8
-environment variable.
-The settings that receive special
-treatment are listed below.
-Settings beginning with
-.Qq *
-below define the modules to be loaded and
-may have any prefix; the prefix identifies a module.
-All such settings sharing a common
-prefix refer to the same module.
-.Bl -tag -width Ar
-.It Ar exec
-Immediately executes a
-.Xr loader 8
-command.
-This type of setting cannot be processed by programs other
-than
-.Xr loader 8 ,
-so its use should be avoided.
-Multiple instances of it will be processed
-independently.
-.It Ar loader_conf_files
-Defines additional configuration files to be processed right after the
-present file.
-.It Ar kernel
-Name of the kernel to be loaded.
-If no kernel name is set, no additional
-modules will be loaded.
-The name must be a subdirectory of
-.Pa /boot
-that contains a kernel.
-.It Ar kernel_options
-Flags to be passed to the kernel.
-.It Ar vfs.root.mountfrom
-Specify the root partition to mount.
-For example:
-.Pp
-.Dl vfs.root.mountfrom="ufs:/dev/da0s1a"
-.Pp
-.Xr loader 8
-automatically calculates the value of this tunable from
-.Pa /etc/fstab
-from the partition the kernel was loaded from.
-The calculated value might be calculated incorrectly when
-.Pa /etc/fstab
-is not available during
-.Xr loader 8
-startup (as during diskless booting from NFS), or if a different
-device is desired by the user.
-The preferred value can be set in
-.Pa /loader.conf .
-.Pp
-The value can also be overridden from the
-.Xr loader 8
-command line.
-This is useful for system recovery when
-.Pa /etc/fstab
-is damaged, lost, or read from the wrong partition.
-.It Ar password
-Protect boot menu with a password without interrupting
-.Ic autoboot
-process.
-The password should be in clear text format.
-If a password is set, boot menu will not appear until any key is pressed during
-countdown period specified by
-.Va autoboot_delay
-variable or
-.Ic autoboot
-process fails.
-In both cases user should provide specified password to be able to access boot
-menu.
-.It Ar bootlock_password
-Provides a password to be required by check-password before execution is
-allowed to continue.
-The password should be in clear text format.
-If a password is set, the user must provide specified password to boot.
-.It Ar verbose_loading
-If set to
-.Dq YES ,
-module names will be displayed as they are loaded.
-.It Ar *_load
-If set to
-.Dq YES ,
-that module will be loaded.
-If no name is defined (see below), the
-module's name is taken to be the same as the prefix.
-.It Ar *_name
-Defines the name of the module.
-.It Ar *_type
-Defines the module's type.
-If none is given, it defaults to a kld module.
-.It Ar *_flags
-Flags and parameters to be passed to the module.
-.It Ar *_before
-Commands to be executed before the module is loaded.
-Use of this setting
-should be avoided.
-.It Ar *_after
-Commands to be executed after the module is loaded.
-Use of this setting
-should be avoided.
-.It Ar *_error
-Commands to be executed if the loading of a module fails.
-Except for the
-special value
-.Dq abort ,
-which aborts the bootstrap process, use of this setting should be avoided.
-.El
-.Pp
-.Em WARNING:
-developers should never use these suffixes for any kernel environment
-variables (tunables) or conflicts will result.
-.Sh DEFAULT SETTINGS
-Most of
-.Nm Ns 's
-default settings can be ignored.
-The few of them which are important
-or useful are:
-.Bl -tag -width bootfile -offset indent
-.It Va bitmap_load
-.Pq Dq NO
-If set to
-.Dq YES ,
-a bitmap will be loaded to be displayed on screen while booting.
-.It Va bitmap_name
-.Pq Dq Pa /boot/splash.bmp
-Name of the bitmap to be loaded.
-Any other name can be used.
-.It Va comconsole_speed
-.Dq ( 9600
-or the value of the
-.Va BOOT_COMCONSOLE_SPEED
-variable when
-.Xr loader 8
-was compiled).
-Sets the speed of the serial console.
-If the previous boot loader stage specified that a serial console
-is in use then the default speed is determined from the current
-serial port speed setting.
-.It Va console
-.Pq Dq vidconsole
-.Dq comconsole
-selects serial console,
-.Dq vidconsole
-selects the video console,
-.Dq nullconsole
-selects a mute console
-(useful for systems with neither a video console nor a serial port), and
-.Dq spinconsole
-selects the video console which prevents any input and hides all output
-replacing it with
-.Dq spinning
-character (useful for embedded products and such).
-.It Va kernel
-.Pq Dq kernel
-.It Va kernels
-.Pq Dq kernel kernel.old
-Space or comma separated list of kernels to present in the boot menu.
-.It Va loader_conf_files
-.Pq Dq Pa /boot/loader.conf /boot/loader.conf.local
-.It Va splash_bmp_load
-.Pq Dq NO
-If set to
-.Dq YES ,
-will load the splash screen module, making it possible to display a bmp image
-on the screen while booting.
-.It Va splash_pcx_load
-.Pq Dq NO
-If set to
-.Dq YES ,
-will load the splash screen module, making it possible to display a pcx image
-on the screen while booting.
-.It Va vesa_load
-.Pq Dq NO
-If set to
-.Dq YES ,
-the vesa module will be loaded, enabling bitmaps above VGA resolution to
-be displayed.
-.It Va beastie_disable
-If set to
-.Dq YES ,
-the beastie boot menu will be skipped.
-The beastie boot menu is always skipped if running non-x86 hardware.
-.It Va loader_logo Pq Dq Li orbbw
-Selects a desired logo in the beastie boot menu.
-Possible values are:
-.Dq Li orbbw ,
-.Dq Li orb ,
-.Dq Li fbsdbw ,
-.Dq Li beastiebw ,
-.Dq Li beastie ,
-and
-.Dq Li none .
-.It Va loader_color
-If set to
-.Dq NO ,
-the beastie boot menu will be displayed without ANSI coloring.
-.It Va entropy_cache_load
-.Pq Dq YES
-If set to
-.Dq NO ,
-the very early
-boot-time entropy file
-will not be loaded.
-See the entropy entries in
-.Xr rc.conf 5 .
-.It Va entropy_cache_name
-.Pq Dq /boot/entropy
-The name of the very early
-boot-time entropy cache file.
-.El
-.Sh FILES
-.Bl -tag -width /boot/defaults/loader.conf -compact
-.It Pa /boot/defaults/loader.conf
-default settings -- do not change this file.
-.It Pa /boot/loader.4th
-defines the commands used by loader to read and process
-.Nm .
-.It Pa /boot/loader.conf
-user defined settings.
-.It Pa /boot/loader.conf.local
-machine-specific settings for sites with a common loader.conf.
-.It Pa /boot/loader.rc
-contains the instructions to automatically process
-.Nm .
-.El
-.Sh SEE ALSO
-.Xr rc.conf 5 ,
-.Xr boot 8 ,
-.Xr loader 8 ,
-.Xr loader.4th 8
-.Sh HISTORY
-The file
-.Nm
-first appeared in
-.Fx 3.2 .
-.Sh AUTHORS
-This manual page was written by
-.An Daniel C. Sobral Aq dcs@FreeBSD.org .
-.Sh BUGS
-The
-.Xr loader 8
-stops reading
-.Nm
-when it encounters a syntax error, so any options which are vital for
-booting a particular system (i.e.\&
-.Dq Va hw.ata.ata_dma Ns "=0" )
-should precede any experimental additions to
-.Nm .