diff options
Diffstat (limited to 'sys/contrib/dev/iwlwifi/fw/api/power.h')
| -rw-r--r-- | sys/contrib/dev/iwlwifi/fw/api/power.h | 171 |
1 files changed, 97 insertions, 74 deletions
diff --git a/sys/contrib/dev/iwlwifi/fw/api/power.h b/sys/contrib/dev/iwlwifi/fw/api/power.h index 6e6a92d173cc..786b3bf4b448 100644 --- a/sys/contrib/dev/iwlwifi/fw/api/power.h +++ b/sys/contrib/dev/iwlwifi/fw/api/power.h @@ -1,12 +1,14 @@ /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* - * Copyright (C) 2012-2014, 2018-2024 Intel Corporation + * Copyright (C) 2012-2014, 2018-2025 Intel Corporation * Copyright (C) 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015-2017 Intel Deutschland GmbH */ #ifndef __iwl_fw_api_power_h__ #define __iwl_fw_api_power_h__ +#include "nvm-reg.h" + /* Power Management Commands, Responses, Notifications */ /** @@ -54,7 +56,7 @@ struct iwl_ltr_config_cmd_v1 { * @flags: See &enum iwl_ltr_config_flags * @static_long: static LTR Long register value. * @static_short: static LTR Short register value. - * @ltr_cfg_values: LTR parameters table values (in usec) in folowing order: + * @ltr_cfg_values: LTR parameters table values (in usec) in following order: * TX, RX, Short Idle, Long Idle. Used only if %LTR_CFG_FLAG_UPDATE_VALUES * is set. * @ltr_short_idle_timeout: LTR Short Idle timeout (in usec). Used only if @@ -89,6 +91,7 @@ struct iwl_ltr_config_cmd { * @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable. * @POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving * detection enablement + * @POWER_FLAGS_ENABLE_SMPS_MSK: SMPS is allowed for this vif */ enum iwl_power_flags { POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0), @@ -99,6 +102,7 @@ enum iwl_power_flags { POWER_FLAGS_ADVANCE_PM_ENA_MSK = BIT(9), POWER_FLAGS_LPRX_ENA_MSK = BIT(11), POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK = BIT(12), + POWER_FLAGS_ENABLE_SMPS_MSK = BIT(14), }; #define IWL_POWER_VEC_SIZE 5 @@ -216,7 +220,6 @@ struct iwl_mac_power_cmd { /* CONTEXT_DESC_API_T_VER_1 */ __le32 id_and_color; - /* CLIENT_PM_POWER_TABLE_S_VER_1 */ __le16 flags; __le16 keep_alive_seconds; __le32 rx_data_timeout; @@ -237,7 +240,7 @@ struct iwl_mac_power_cmd { u8 heavy_rx_thld_percentage; u8 limited_ps_threshold; u8 reserved; -} __packed; +} __packed; /* CLIENT_PM_POWER_TABLE_S_VER_1, VER_2 */ /* * struct iwl_uapsd_misbehaving_ap_notif - FW sends this notification when @@ -252,21 +255,8 @@ struct iwl_uapsd_misbehaving_ap_notif { u8 reserved[3]; } __packed; -/** - * struct iwl_reduce_tx_power_cmd - TX power reduction command - * REDUCE_TX_POWER_CMD = 0x9f - * @flags: (reserved for future implementation) - * @mac_context_id: id of the mac ctx for which we are reducing TX power. - * @pwr_restriction: TX power restriction in dBms. - */ -struct iwl_reduce_tx_power_cmd { - u8 flags; - u8 mac_context_id; - __le16 pwr_restriction; -} __packed; /* TX_REDUCED_POWER_API_S_VER_1 */ - enum iwl_dev_tx_power_cmd_mode { - IWL_TX_POWER_MODE_SET_MAC = 0, + IWL_TX_POWER_MODE_SET_LINK = 0, IWL_TX_POWER_MODE_SET_DEVICE = 1, IWL_TX_POWER_MODE_SET_CHAINS = 2, IWL_TX_POWER_MODE_SET_ACK = 3, @@ -283,20 +273,16 @@ enum iwl_dev_tx_power_cmd_mode { /** * struct iwl_dev_tx_power_common - Common part of the TX power reduction cmd * @set_mode: see &enum iwl_dev_tx_power_cmd_mode - * @mac_context_id: id of the mac ctx for which we are reducing TX power. + * @link_id: id of the link ctx for which we are reducing TX power. + * For version 9 / 10, this is the link id. For earlier versions, it is + * the mac id. * @pwr_restriction: TX power restriction in 1/8 dBms. - * @dev_24: device TX power restriction in 1/8 dBms - * @dev_52_low: device TX power restriction upper band - low - * @dev_52_high: device TX power restriction upper band - high */ struct iwl_dev_tx_power_common { __le32 set_mode; - __le32 mac_context_id; + __le32 link_id; __le16 pwr_restriction; - __le16 dev_24; - __le16 dev_52_low; - __le16 dev_52_high; -}; +} __packed; /** * struct iwl_dev_tx_power_cmd_v3 - TX power reduction command version 3 @@ -343,7 +329,7 @@ struct iwl_dev_tx_power_cmd_v5 { } __packed; /* TX_REDUCED_POWER_API_S_VER_5 */ /** - * struct iwl_dev_tx_power_cmd_v6 - TX power reduction command version 6 + * struct iwl_dev_tx_power_cmd_v8 - TX power reduction command version 8 * @per_chain: per chain restrictions * @enable_ack_reduction: enable or disable close range ack TX power * reduction. @@ -354,43 +340,74 @@ struct iwl_dev_tx_power_cmd_v5 { * @reserved: reserved (padding) * @timer_period: timer in milliseconds. if expires FW will change to default * BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER + * @flags: reduce power flags. + * @tpc_vlp_backoff_level: user backoff of UNII5,7 VLP channels in USA. + * Not in use. */ -struct iwl_dev_tx_power_cmd_v6 { +struct iwl_dev_tx_power_cmd_v8 { __le16 per_chain[IWL_NUM_CHAIN_TABLES_V2][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2]; u8 enable_ack_reduction; u8 per_chain_restriction_changed; u8 reserved[2]; __le32 timer_period; -} __packed; /* TX_REDUCED_POWER_API_S_VER_6 */ + __le32 flags; + __le32 tpc_vlp_backoff_level; +} __packed; /* TX_REDUCED_POWER_API_S_VER_8 */ + +/* + * @dev_24: device TX power restriction in 1/8 dBms + * @dev_52_low: device TX power restriction upper band - low + * @dev_52_high: device TX power restriction upper band - high + */ +struct iwl_dev_tx_power_cmd_per_band { + __le16 dev_24; + __le16 dev_52_low; + __le16 dev_52_high; +} __packed; /** - * struct iwl_dev_tx_power_cmd_v7 - TX power reduction command version 7 + * struct iwl_dev_tx_power_cmd_v3_v8 - TX power reduction command (multiversion) + * @per_band: per band restrictions + * @common: common part of the command + * @v3: version 3 part of the command + * @v4: version 4 part of the command + * @v5: version 5 part of the command + * @v8: version 8 part of the command + */ +struct iwl_dev_tx_power_cmd_v3_v8 { + struct iwl_dev_tx_power_common common; + struct iwl_dev_tx_power_cmd_per_band per_band; + union { + struct iwl_dev_tx_power_cmd_v3 v3; + struct iwl_dev_tx_power_cmd_v4 v4; + struct iwl_dev_tx_power_cmd_v5 v5; + struct iwl_dev_tx_power_cmd_v8 v8; + }; +}; + +/** + * struct iwl_dev_tx_power_cmd_v9 - TX power reduction cmd + * @reserved: reserved (padding) * @per_chain: per chain restrictions - * @enable_ack_reduction: enable or disable close range ack TX power - * reduction. * @per_chain_restriction_changed: is per_chain_restriction has changed * from last command. used if set_mode is * IWL_TX_POWER_MODE_SET_SAR_TIMER. * note: if not changed, the command is used for keep alive only. - * @reserved: reserved (padding) + * @reserved1: reserved (padding) * @timer_period: timer in milliseconds. if expires FW will change to default * BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER - * @flags: reduce power flags. */ -struct iwl_dev_tx_power_cmd_v7 { - __le16 per_chain[IWL_NUM_CHAIN_TABLES_V2][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2]; - u8 enable_ack_reduction; +struct iwl_dev_tx_power_cmd_v9 { + __le16 reserved; + __le16 per_chain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1]; u8 per_chain_restriction_changed; - u8 reserved[2]; + u8 reserved1[3]; __le32 timer_period; - __le32 flags; -} __packed; /* TX_REDUCED_POWER_API_S_VER_7 */ +} __packed; /* TX_REDUCED_POWER_API_S_VER_9 */ /** - * struct iwl_dev_tx_power_cmd_v8 - TX power reduction command version 8 + * struct iwl_dev_tx_power_cmd_v10 - TX power reduction cmd * @per_chain: per chain restrictions - * @enable_ack_reduction: enable or disable close range ack TX power - * reduction. * @per_chain_restriction_changed: is per_chain_restriction has changed * from last command. used if set_mode is * IWL_TX_POWER_MODE_SET_SAR_TIMER. @@ -399,40 +416,28 @@ struct iwl_dev_tx_power_cmd_v7 { * @timer_period: timer in milliseconds. if expires FW will change to default * BIOS values. relevant if setMode is IWL_TX_POWER_MODE_SET_SAR_TIMER * @flags: reduce power flags. - * @tpc_vlp_backoff_level: user backoff of UNII5,7 VLP channels in USA. - * Not in use. */ -struct iwl_dev_tx_power_cmd_v8 { +struct iwl_dev_tx_power_cmd_v10 { __le16 per_chain[IWL_NUM_CHAIN_TABLES_V2][IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2]; - u8 enable_ack_reduction; u8 per_chain_restriction_changed; - u8 reserved[2]; + u8 reserved; __le32 timer_period; __le32 flags; - __le32 tpc_vlp_backoff_level; -} __packed; /* TX_REDUCED_POWER_API_S_VER_8 */ +} __packed; /* TX_REDUCED_POWER_API_S_VER_10 */ -/** +/* * struct iwl_dev_tx_power_cmd - TX power reduction command (multiversion) * @common: common part of the command - * @v3: version 3 part of the command - * @v4: version 4 part of the command - * @v5: version 5 part of the command - * @v6: version 6 part of the command - * @v7: version 7 part of the command - * @v8: version 8 part of the command + * @v9: version 9 part of the command + * @v10: version 10 part of the command */ struct iwl_dev_tx_power_cmd { struct iwl_dev_tx_power_common common; union { - struct iwl_dev_tx_power_cmd_v3 v3; - struct iwl_dev_tx_power_cmd_v4 v4; - struct iwl_dev_tx_power_cmd_v5 v5; - struct iwl_dev_tx_power_cmd_v6 v6; - struct iwl_dev_tx_power_cmd_v7 v7; - struct iwl_dev_tx_power_cmd_v8 v8; + struct iwl_dev_tx_power_cmd_v9 v9; + struct iwl_dev_tx_power_cmd_v10 v10; }; -}; +} __packed; /* TX_REDUCED_POWER_API_S_VER_9_VER10 */ #define IWL_NUM_GEO_PROFILES 3 #define IWL_NUM_GEO_PROFILES_V3 8 @@ -565,28 +570,37 @@ enum iwl_ppag_flags { /** * union iwl_ppag_table_cmd - union for all versions of PPAG command - * @v1: version 1 - * @v2: version 2 - * version 3, 4, 5 and 6 are the same structure as v2, + * @v1: command version 1 structure. + * @v2: command version from 2 to 6 are same structure as v2. * but has a different format of the flags bitmap + * @v3: command version 7 structure. * @v1.flags: values from &enum iwl_ppag_flags * @v1.gain: table of antenna gain values per chain and sub-band * @v1.reserved: reserved * @v2.flags: values from &enum iwl_ppag_flags * @v2.gain: table of antenna gain values per chain and sub-band - * @v2.reserved: reserved + * @v3.ppag_config_info: see @struct bios_value_u32 + * @v3.gain: table of antenna gain values per chain and sub-band + * @v3.reserved: reserved */ union iwl_ppag_table_cmd { struct { __le32 flags; s8 gain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V1]; s8 reserved[2]; - } v1; + } __packed v1; /* PER_PLAT_ANTENNA_GAIN_CMD_API_S_VER_1 */ struct { __le32 flags; s8 gain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2]; s8 reserved[2]; - } v2; + } __packed v2; /* PER_PLAT_ANTENNA_GAIN_CMD_API_S_VER_2, VER3, VER4, + * VER5, VER6 + */ + struct { + struct bios_value_u32 ppag_config_info; + s8 gain[IWL_NUM_CHAIN_LIMITS][IWL_NUM_SUB_BANDS_V2]; + s8 reserved[2]; + } __packed v3; /* PER_PLAT_ANTENNA_GAIN_CMD_API_S_VER_7 */ } __packed; #define IWL_PPAG_CMD_V4_MASK (IWL_PPAG_ETSI_MASK | IWL_PPAG_CHINA_MASK) @@ -594,6 +608,15 @@ union iwl_ppag_table_cmd { IWL_PPAG_ETSI_LPI_UHB_MASK | \ IWL_PPAG_USA_LPI_UHB_MASK) +#define IWL_PPAG_CMD_V6_MASK (IWL_PPAG_CMD_V5_MASK | \ + IWL_PPAG_ETSI_VLP_UHB_MASK | \ + IWL_PPAG_ETSI_SP_UHB_MASK | \ + IWL_PPAG_USA_VLP_UHB_MASK | \ + IWL_PPAG_USA_SP_UHB_MASK | \ + IWL_PPAG_CANADA_LPI_UHB_MASK | \ + IWL_PPAG_CANADA_VLP_UHB_MASK | \ + IWL_PPAG_CANADA_SP_UHB_MASK) + #define MCC_TO_SAR_OFFSET_TABLE_ROW_SIZE 26 #define MCC_TO_SAR_OFFSET_TABLE_COL_SIZE 13 @@ -627,7 +650,7 @@ struct iwl_sar_offset_mapping_cmd { * Roaming Energy Delta Threshold, otherwise use normal Energy Delta * Threshold. Typical energy threshold is -72dBm. * @bf_temp_threshold: This threshold determines the type of temperature - * filtering (Slow or Fast) that is selected (Units are in Celsuis): + * filtering (Slow or Fast) that is selected (Units are in Celsius): * If the current temperature is above this threshold - Fast filter * will be used, If the current temperature is below this threshold - * Slow filter will be used. @@ -635,12 +658,12 @@ struct iwl_sar_offset_mapping_cmd { * calculated for this and the last passed beacon is greater than this * threshold. Zero value means that the temperature change is ignored for * beacon filtering; beacons will not be forced to be sent to driver - * regardless of whether its temerature has been changed. + * regardless of whether its temperature has been changed. * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values * calculated for this and the last passed beacon is greater than this * threshold. Zero value means that the temperature change is ignored for * beacon filtering; beacons will not be forced to be sent to driver - * regardless of whether its temerature has been changed. + * regardless of whether its temperature has been changed. * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled. * @bf_debug_flag: beacon filtering debug configuration * @bf_escape_timer: Send beacons to to driver if no beacons were passed |
