diff options
Diffstat (limited to 'sys/contrib/device-tree/Bindings/memory-controllers/fsl')
9 files changed, 694 insertions, 0 deletions
diff --git a/sys/contrib/device-tree/Bindings/memory-controllers/fsl/ddr.txt b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/ddr.txt new file mode 100644 index 000000000000..dde6d837083a --- /dev/null +++ b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/ddr.txt @@ -0,0 +1,29 @@ +Freescale DDR memory controller + +Properties: + +- compatible : Should include "fsl,chip-memory-controller" where + chip is the processor (bsc9132, mpc8572 etc.), or + "fsl,qoriq-memory-controller". +- reg : Address and size of DDR controller registers +- interrupts : Error interrupt of DDR controller +- little-endian : Specifies little-endian access to registers + If omitted, big-endian will be used. + +Example 1: + + memory-controller@2000 { + compatible = "fsl,bsc9132-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 1 8>; + }; + + +Example 2: + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.7", + "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; diff --git a/sys/contrib/device-tree/Bindings/memory-controllers/fsl/fsl,ddr.yaml b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/fsl,ddr.yaml new file mode 100644 index 000000000000..84f778a99546 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/fsl,ddr.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ddr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale DDR memory controller + +maintainers: + - Borislav Petkov <bp@alien8.de> + - York Sun <york.sun@nxp.com> + +properties: + $nodename: + pattern: "^memory-controller@[0-9a-f]+$" + + compatible: + oneOf: + - items: + - enum: + - fsl,qoriq-memory-controller-v4.4 + - fsl,qoriq-memory-controller-v4.5 + - fsl,qoriq-memory-controller-v4.7 + - fsl,qoriq-memory-controller-v5.0 + - const: fsl,qoriq-memory-controller + - enum: + - fsl,bsc9132-memory-controller + - fsl,mpc8536-memory-controller + - fsl,mpc8540-memory-controller + - fsl,mpc8541-memory-controller + - fsl,mpc8544-memory-controller + - fsl,mpc8548-memory-controller + - fsl,mpc8555-memory-controller + - fsl,mpc8560-memory-controller + - fsl,mpc8568-memory-controller + - fsl,mpc8569-memory-controller + - fsl,mpc8572-memory-controller + - fsl,mpc8349-memory-controller + - fsl,p1020-memory-controller + - fsl,p1021-memory-controller + - fsl,p2020-memory-controller + - fsl,qoriq-memory-controller + + interrupts: + maxItems: 1 + + little-endian: + description: + Specifies little-endian access to registers. If omitted, big-endian will + be used. + type: boolean + + reg: + maxItems: 1 + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + memory-controller@2000 { + compatible = "fsl,bsc9132-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 1 8>; + }; + + - | + memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.7", + "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; diff --git a/sys/contrib/device-tree/Bindings/memory-controllers/fsl/fsl,ifc.yaml b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/fsl,ifc.yaml new file mode 100644 index 000000000000..d1c3421bee10 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/fsl,ifc.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ifc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: FSL/NXP Integrated Flash Controller + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + +description: | + NXP's integrated flash controller (IFC) is an advanced version of the + enhanced local bus controller which includes similar programming and signal + interfaces with an extended feature set. The IFC provides access to multiple + external memory types, such as NAND flash (SLC and MLC), NOR flash, EPROM, + SRAM and other memories where address and data are shared on a bus. + +properties: + $nodename: + pattern: "^memory-controller@[0-9a-f]+$" + + compatible: + const: fsl,ifc + + "#address-cells": + enum: [2, 3] + description: | + Should be either two or three. The first cell is the chipselect + number, and the remaining cells are the offset into the chipselect. + + "#size-cells": + enum: [1, 2] + description: | + Either one or two, depending on how large each chipselect can be. + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + description: | + IFC may have one or two interrupts. If two interrupt specifiers are + present, the first is the "common" interrupt (CM_EVTER_STAT), and the + second is the NAND interrupt (NAND_EVTER_STAT). If there is only one, + that interrupt reports both types of event. + + little-endian: + type: boolean + description: | + If this property is absent, the big-endian mode will be in use as default + for registers. + + ranges: + description: | + Each range corresponds to a single chipselect, and covers the entire + access window as configured. + +patternProperties: + "^.*@[a-f0-9]+(,[a-f0-9]+)+$": + type: object + description: | + Child device nodes describe the devices connected to IFC such as NOR (e.g. + cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices + like FPGAs, CPLDs, etc. + + required: + - compatible + - reg + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + memory-controller@ffe1e000 { + compatible = "fsl,ifc"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x0 0xffe1e000 0 0x2000>; + interrupts = <16 2 19 2>; + little-endian; + + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0x0 0xee000000 0x02000000>, + <0x1 0x0 0x0 0xffa00000 0x00010000>, + <0x3 0x0 0x0 0xffb00000 0x00020000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 32MB for user data */ + reg = <0x0 0x02000000>; + label = "NOR Data"; + }; + }; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml new file mode 100644 index 000000000000..82fc5f4a1ed6 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX WEIM Bus Peripheral Nodes + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + +description: + This binding is meant for the child nodes of the WEIM node. The node + represents any device connected to the WEIM bus. It may be a Flash chip, + RAM chip or Ethernet controller, etc. These properties are meant for + configuring the WEIM settings/timings and will accompany the bindings + supported by the respective device. + +properties: + reg: true + + fsl,weim-cs-timing: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Timing values for the child node. + minItems: 2 + maxItems: 6 + +# the WEIM child will have its own native properties +additionalProperties: true diff --git a/sys/contrib/device-tree/Bindings/memory-controllers/fsl/fsl,imx-weim.yaml b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/fsl,imx-weim.yaml new file mode 100644 index 000000000000..ce4ec94a561c --- /dev/null +++ b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/fsl,imx-weim.yaml @@ -0,0 +1,201 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX Wireless External Interface Module (WEIM) + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + +description: + The term "wireless" does not imply that the WEIM is literally an interface + without wires. It simply means that this module was originally designed for + wireless and mobile applications that use low-power technology. The actual + devices are instantiated from the child nodes of a WEIM node. + +properties: + $nodename: + pattern: "^memory-controller@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - fsl,imx1-weim + - fsl,imx27-weim + - fsl,imx50-weim + - fsl,imx51-weim + - fsl,imx6q-weim + - items: + - enum: + - fsl,imx31-weim + - fsl,imx35-weim + - const: fsl,imx27-weim + - items: + - enum: + - fsl,imx6sx-weim + - fsl,imx6ul-weim + - const: fsl,imx6q-weim + + "#address-cells": + const: 2 + + "#size-cells": + const: 1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + ranges: true + + fsl,weim-cs-gpr: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Phandle to the system General Purpose Register controller that contains + WEIM CS GPR register, e.g. IOMUXC_GPR1 on i.MX6Q. IOMUXC_GPR1[11:0] + should be set up as one of the following 4 possible values depending on + the CS space configuration. + + IOMUXC_GPR1[11:0] CS0 CS1 CS2 CS3 + --------------------------------------------- + 05 128M 0M 0M 0M + 033 64M 64M 0M 0M + 0113 64M 32M 32M 0M + 01111 32M 32M 32M 32M + + In case that the property is absent, the reset value or what bootloader + sets up in IOMUXC_GPR1[11:0] will be used. + + fsl,burst-clk-enable: + type: boolean + description: + The presence of this property indicates that the weim bus should operate + in Burst Clock Mode. + + fsl,continuous-burst-clk: + type: boolean + description: + Make Burst Clock to output continuous clock. Without this option Burst + Clock will output clock only when necessary. + +patternProperties: + "^.*@[0-7],[0-9a-f]+$": + type: object + description: Devices attached to chip selects are represented as subnodes. + $ref: fsl,imx-weim-peripherals.yaml + additionalProperties: true + required: + - fsl,weim-cs-timing + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + - ranges + +allOf: + - if: + properties: + compatible: + not: + contains: + enum: + - fsl,imx50-weim + - fsl,imx6q-weim + then: + properties: + fsl,weim-cs-gpr: false + fsl,burst-clk-enable: false + - if: + not: + required: + - fsl,burst-clk-enable + then: + properties: + fsl,continuous-burst-clk: false + - if: + properties: + compatible: + contains: + const: fsl,imx1-weim + then: + patternProperties: + "^.*@[0-7],[0-9a-f]+$": + properties: + fsl,weim-cs-timing: + items: + - description: CSxU + - description: CSxL + - if: + properties: + compatible: + contains: + enum: + - fsl,imx27-weim + - fsl,imx31-weim + - fsl,imx35-weim + then: + patternProperties: + "^.*@[0-7],[0-9a-f]+$": + properties: + fsl,weim-cs-timing: + items: + - description: CSCRxU + - description: CSCRxL + - description: CSCRxA + - if: + properties: + compatible: + contains: + enum: + - fsl,imx50-weim + - fsl,imx51-weim + - fsl,imx6q-weim + - fsl,imx6sx-weim + - fsl,imx6ul-weim + then: + patternProperties: + "^.*@[0-7],[0-9a-f]+$": + properties: + fsl,weim-cs-timing: + items: + - description: CSxGCR1 + - description: CSxGCR2 + - description: CSxRCR1 + - description: CSxRCR2 + - description: CSxWCR1 + - description: CSxWCR2 + +additionalProperties: false + +examples: + - | + memory-controller@21b8000 { + compatible = "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + clocks = <&clks 196>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x08000000>; + fsl,weim-cs-gpr = <&gpr>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000 + 0x0000c000 0x1404a38e 0x00000000>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/memory-controllers/fsl/ifc.txt b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/ifc.txt new file mode 100644 index 000000000000..89427b018ba7 --- /dev/null +++ b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/ifc.txt @@ -0,0 +1,82 @@ +Integrated Flash Controller + +Properties: +- name : Should be ifc +- compatible : should contain "fsl,ifc". The version of the integrated + flash controller can be found in the IFC_REV register at + offset zero. + +- #address-cells : Should be either two or three. The first cell is the + chipselect number, and the remaining cells are the + offset into the chipselect. +- #size-cells : Either one or two, depending on how large each chipselect + can be. +- reg : Offset and length of the register set for the device +- interrupts: IFC may have one or two interrupts. If two interrupt + specifiers are present, the first is the "common" + interrupt (CM_EVTER_STAT), and the second is the NAND + interrupt (NAND_EVTER_STAT). If there is only one, + that interrupt reports both types of event. + +- little-endian : If this property is absent, the big-endian mode will + be in use as default for registers. + +- ranges : Each range corresponds to a single chipselect, and covers + the entire access window as configured. + +Child device nodes describe the devices connected to IFC such as NOR (e.g. +cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices +like FPGAs, CPLDs, etc. + +Example: + + ifc@ffe1e000 { + compatible = "fsl,ifc", "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x0 0xffe1e000 0 0x2000>; + interrupts = <16 2 19 2>; + little-endian; + + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0x0 0xee000000 0x02000000 + 0x1 0x0 0x0 0xffa00000 0x00010000 + 0x3 0x0 0x0 0xffb00000 0x00020000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 32MB for user data */ + reg = <0x0 0x02000000>; + label = "NOR Data"; + }; + }; + + flash@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1010rdb-cpld"; + reg = <0x3 0x0 0x000001f>; + }; + }; diff --git a/sys/contrib/device-tree/Bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/imx8m-ddrc.yaml new file mode 100644 index 000000000000..519b123116dc --- /dev/null +++ b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/imx8m-ddrc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/fsl/imx8m-ddrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX8M DDR Controller + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: + The DDRC block is integrated in i.MX8M for interfacing with DDR based + memories. + + It supports switching between different frequencies at runtime but during + this process RAM itself becomes briefly inaccessible so actual frequency + switching is implemented by TF-A code which runs from a SRAM area. + + The Linux driver for the DDRC doesn't even map registers (they're included + for the sake of "describing hardware"), it mostly just exposes firmware + capabilities through standard Linux mechanism like devfreq and OPP tables. + +properties: + compatible: + items: + - enum: + - fsl,imx8mn-ddrc + - fsl,imx8mm-ddrc + - fsl,imx8mq-ddrc + - const: fsl,imx8m-ddrc + + reg: + maxItems: 1 + description: + Base address and size of DDRC CTL area. + This is not currently mapped by the imx8m-ddrc driver. + + clocks: + maxItems: 4 + + clock-names: + items: + - const: core + - const: pll + - const: alt + - const: apb + + operating-points-v2: true + opp-table: + type: object + +required: + - reg + - compatible + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + ddrc: memory-controller@3d400000 { + compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc"; + reg = <0x3d400000 0x400000>; + clock-names = "core", "pll", "alt", "apb"; + clocks = <&clk IMX8MM_CLK_DRAM_CORE>, + <&clk IMX8MM_DRAM_PLL>, + <&clk IMX8MM_CLK_DRAM_ALT>, + <&clk IMX8MM_CLK_DRAM_APB>; + operating-points-v2 = <&ddrc_opp_table>; + }; diff --git a/sys/contrib/device-tree/Bindings/memory-controllers/fsl/mmdc.txt b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/mmdc.txt new file mode 100644 index 000000000000..bcc36c5b543c --- /dev/null +++ b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/mmdc.txt @@ -0,0 +1,35 @@ +Freescale Multi Mode DDR controller (MMDC) + +Required properties : +- compatible : should be one of following: + for i.MX6Q/i.MX6DL: + - "fsl,imx6q-mmdc"; + for i.MX6QP: + - "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc"; + for i.MX6SL: + - "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc"; + for i.MX6SLL: + - "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc"; + for i.MX6SX: + - "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; + for i.MX6UL/i.MX6ULL/i.MX6ULZ: + - "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; + for i.MX7ULP: + - "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc"; +- reg : address and size of MMDC DDR controller registers + +Optional properties : +- clocks : the clock provided by the SoC to access the MMDC registers + +Example : + mmdc0: memory-controller@21b0000 { /* MMDC0 */ + compatible = "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>; + }; + + mmdc1: memory-controller@21b4000 { /* MMDC1 */ + compatible = "fsl,imx6q-mmdc"; + reg = <0x021b4000 0x4000>; + status = "disabled"; + }; diff --git a/sys/contrib/device-tree/Bindings/memory-controllers/fsl/mmdc.yaml b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/mmdc.yaml new file mode 100644 index 000000000000..5447f1dddedf --- /dev/null +++ b/sys/contrib/device-tree/Bindings/memory-controllers/fsl/mmdc.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/fsl/mmdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Multi Mode DDR controller (MMDC) + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Sascha Hauer <s.hauer@pengutronix.de> + - Fabio Estevam <festevam@gmail.com> + +properties: + compatible: + oneOf: + - const: fsl,imx6q-mmdc + - items: + - enum: + - fsl,imx6qp-mmdc + - fsl,imx6sl-mmdc + - fsl,imx6sll-mmdc + - fsl,imx6sx-mmdc + - fsl,imx6ul-mmdc + - fsl,imx7ulp-mmdc + - const: fsl,imx6q-mmdc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + + memory-controller@21b0000 { + compatible = "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>; + }; + + memory-controller@21b4000 { + compatible = "fsl,imx6q-mmdc"; + reg = <0x021b4000 0x4000>; + }; |