diff options
Diffstat (limited to 'sys/contrib/device-tree/src/arm/at91-kizbox3_common.dtsi')
-rw-r--r-- | sys/contrib/device-tree/src/arm/at91-kizbox3_common.dtsi | 371 |
1 files changed, 0 insertions, 371 deletions
diff --git a/sys/contrib/device-tree/src/arm/at91-kizbox3_common.dtsi b/sys/contrib/device-tree/src/arm/at91-kizbox3_common.dtsi deleted file mode 100644 index abe27adfa4d6..000000000000 --- a/sys/contrib/device-tree/src/arm/at91-kizbox3_common.dtsi +++ /dev/null @@ -1,371 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3 - * family SoC boards - * - * Copyright (C) 2018 Overkiz SAS - * - * Authors: Dorian Rocipon <d.rocipon@overkiz.com> - * Kevin Carli <k.carli@overkiz.com> - * Mickael Gardet <m.gardet@overkiz.com> - */ -/dts-v1/; -#include "sama5d2.dtsi" -#include "sama5d2-pinfunc.h" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/mfd/atmel-flexcom.h> -#include <dt-bindings/pinctrl/at91.h> -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "Overkiz Kizbox3"; - compatible = "overkiz,kizbox3", "atmel,sama5d2", "atmel,sama5"; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - serial6 = &uart8; - }; - - chosen { - bootargs = "ubi.mtd=ubi"; - stdout-path = "serial1:115200n8"; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - vdd_adc_vddana: supply_3v3_ana { - compatible = "regulator-fixed"; - regulator-name = "adc-vddana"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_adc_vref: supply_3v3_ref { - compatible = "regulator-fixed"; - regulator-name = "adc-vref"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - led-controller-1 { - compatible = "pwm-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_pwm_h0 - &pinctrl_pwm0_pwm_h1 - &pinctrl_pwm0_pwm_h2 - &pinctrl_pwm0_pwm_h3>; - status = "disabled"; - - led-1 { - label = "pwm:red:user"; - pwms = <&pwm0 0 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - status = "disabled"; - }; - - led-2 { - label = "pwm:green:user"; - pwms = <&pwm0 1 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - status = "disabled"; - }; - - led-3 { - label = "pwm:blue:user"; - pwms = <&pwm0 2 10000000 0>; - max-brightness = <255>; - status = "disabled"; - }; - - led-4 { - label = "pwm:white:user"; - pwms = <&pwm0 3 10000000 0>; - max-brightness = <255>; - status = "disabled"; - }; - }; -}; - -&ebi { - status = "okay"; -}; - -&nand_controller { - status = "okay"; - - nand@3 { - pinctrl-0 = <&pinctrl_ebi_nand_addr>; - pinctrl-names = "default"; - reg = <0x3 0x0 0x800000>; - - atmel,rb = <0>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - u-boot@20000 { - label = "u-boot"; - reg = <0x20000 0x140000>; - }; - - u-boot-factory@160000 { - label = "u-boot-factory"; - reg = <0x160000 0x140000>; - }; - - ubi@2A0000 { - label = "ubi"; - reg = <0x2A0000 0x7D60000>; - }; - }; - - }; -}; - -&rtc { - status = "okay"; -}; - -&pioA { - pinctrl_ebi_nand_addr: ebi-addr-1 { - pinmux = <PIN_PA0__D0>, - <PIN_PA1__D1>, - <PIN_PA2__D2>, - <PIN_PA3__D3>, - <PIN_PA4__D4>, - <PIN_PA5__D5>, - <PIN_PA6__D6>, - <PIN_PA7__D7>, - <PIN_PA8__NWE_NANDWE>, - <PIN_PA9__NCS3>, - <PIN_PA10__A21_NANDALE>, - <PIN_PA11__A22_NANDCLE>, - <PIN_PA21__NANDRDY>; - bias-disable; - }; - - pinctrl_usart { - pinctrl_usart_0: usart0-0 { - pinmux = < PIN_PB26__URXD0>, <PIN_PB27__UTXD0>; - bias-disable; - }; - pinctrl_usart_1: usart1-0 { - pinmux = < PIN_PD2__URXD1>, <PIN_PD3__UTXD1>; - bias-disable; - }; - pinctrl_usart_2: usart2-0 { - pinmux = < PIN_PD4__URXD2>, <PIN_PD5__UTXD2>; - bias-disable; - }; - pinctrl_usart_3: usart3-0 { - pinmux = < PIN_PC12__URXD3>, <PIN_PC13__UTXD3>; - bias-disable; - }; - pinctrl_usart_4: usart4-0 { - pinmux = < PIN_PB3__URXD4>, <PIN_PB4__UTXD4>; - bias-disable; - }; - pinctrl_flx0_default: flx0_usart_default { - pinmux = <PIN_PB28__FLEXCOM0_IO0>, //TX - <PIN_PB29__FLEXCOM0_IO1>; //RX - bias-disable; - }; - pinctrl_flx3_default: flx3_usart_default { - pinmux = <PIN_PB22__FLEXCOM3_IO1>, //RX - <PIN_PB23__FLEXCOM3_IO0>; //TX - bias-disable; - }; - }; - - pinctrl_flx4_default: flx4_i2c6_default { - pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA - <PIN_PD13__FLEXCOM4_IO1>; //CLK - bias-disable; - drive-open-drain = <1>; - }; - - pinctrl_pwm0 { - pinctrl_pwm0_pwm_h0: pwm0_pwm_h0 { - pinmux = <PIN_PA30__PWMH0>; - bias-disable; - }; - pinctrl_pwm0_pwm_h1: pwm0_pwmh1 { - pinmux = <PIN_PB0__PWMH1>; - bias-disable; - }; - pinctrl_pwm0_pwm_h2: pwm0_pwm_h2 { - pinmux = <PIN_PB5__PWMH2>; - bias-disable; - }; - pinctrl_pwm0_pwm_h3: pwm0_pwm_h3 { - pinmux = <PIN_PB7__PWMH3>; - bias-disable; - }; - }; - - pinctrl_adc { - pinctrl_adc2: adc2 { - pinmux = <PIN_PD21__GPIO>; - bias-disable; - }; - pinctrl_adc3: adc3 { - pinmux = <PIN_PD22__GPIO>; - bias-disable; - }; - pinctrl_adc4: adc4 { - pinmux = <PIN_PD23__GPIO>; - bias-disable; - }; - pinctrl_adc5: adc5 { - pinmux = <PIN_PD24__GPIO>; - bias-disable; - }; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usart_0>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; -}; - -/* debug uart */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usart_1>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usart_2>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usart_3>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usart_4>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; -}; - -&flx0 { - atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; - status = "disabled"; - - uart5: serial@200 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flx0_default>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; - }; -}; - -&flx3 { - atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; - status = "disabled"; - - uart8: serial@200 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flx3_default>; - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "disabled"; - }; -}; - -&flx4 { - atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; - status = "disabled"; - - i2c6: i2c@600 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flx4_default>; - status = "disabled"; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&shutdown_controller { - debounce-delay-us = <976>; - atmel,wakeup-rtc-timer; - - input@0 { - reg = <0>; - }; -}; - -&watchdog { - status = "okay"; -}; - -&adc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc2 - &pinctrl_adc3 - &pinctrl_adc4 - &pinctrl_adc5>; - - vddana-supply = <&vdd_adc_vddana>; - vref-supply = <&vdd_adc_vref>; - status = "disabled"; -}; - -&securam { - export; - - /* export overkiz u-boot mode/version and factory */ - uboot@1400 { - reg = <0x1400 0x20>; - export; - }; -}; |