diff options
Diffstat (limited to 'sys/contrib/device-tree/src/arm/qcom/qcom-ipq8064-v1.0.dtsi')
-rw-r--r-- | sys/contrib/device-tree/src/arm/qcom/qcom-ipq8064-v1.0.dtsi | 123 |
1 files changed, 61 insertions, 62 deletions
diff --git a/sys/contrib/device-tree/src/arm/qcom/qcom-ipq8064-v1.0.dtsi b/sys/contrib/device-tree/src/arm/qcom/qcom-ipq8064-v1.0.dtsi index c5abe7151f14..49de9752632f 100644 --- a/sys/contrib/device-tree/src/arm/qcom/qcom-ipq8064-v1.0.dtsi +++ b/sys/contrib/device-tree/src/arm/qcom/qcom-ipq8064-v1.0.dtsi @@ -14,6 +14,67 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&buttons_pins>; + pinctrl-names = "default"; + + button-1 { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + button-2 { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led-0 { + label = "led_usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbdev"; + default-state = "off"; + }; + + led-1 { + label = "led_usb3"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbdev"; + default-state = "off"; + }; + + led-2 { + label = "status_led_fail"; + function = LED_FUNCTION_STATUS; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + label = "sata_led"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-4 { + label = "status_led_pass"; + function = LED_FUNCTION_STATUS; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + soc { gsbi@16300000 { qcom,mode = <GSBI_PROT_I2C_UART>; @@ -30,7 +91,6 @@ spi4: spi@1a280000 { status = "okay"; - spi-max-frequency = <50000000>; pinctrl-0 = <&spi_pins>; pinctrl-names = "default"; @@ -65,66 +125,5 @@ ports-implemented = <0x1>; status = "okay"; }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-0 = <&buttons_pins>; - pinctrl-names = "default"; - - button-1 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - debounce-interval = <60>; - }; - button-2 { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - debounce-interval = <60>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&leds_pins>; - pinctrl-names = "default"; - - led-0 { - label = "led_usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "usbdev"; - default-state = "off"; - }; - - led-1 { - label = "led_usb3"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "usbdev"; - default-state = "off"; - }; - - led-2 { - label = "status_led_fail"; - function = LED_FUNCTION_STATUS; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led-3 { - label = "sata_led"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led-4 { - label = "status_led_pass"; - function = LED_FUNCTION_STATUS; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; }; }; |