diff options
Diffstat (limited to 'sys/contrib/device-tree/src/arm/spear1310.dtsi')
-rw-r--r-- | sys/contrib/device-tree/src/arm/spear1310.dtsi | 307 |
1 files changed, 0 insertions, 307 deletions
diff --git a/sys/contrib/device-tree/src/arm/spear1310.dtsi b/sys/contrib/device-tree/src/arm/spear1310.dtsi deleted file mode 100644 index 2f746a9428a7..000000000000 --- a/sys/contrib/device-tree/src/arm/spear1310.dtsi +++ /dev/null @@ -1,307 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * DTS file for all SPEAr1310 SoCs - * - * Copyright 2012 Viresh Kumar <vireshk@kernel.org> - */ - -/include/ "spear13xx.dtsi" - -/ { - compatible = "st,spear1310"; - - ahb { - spics: spics@e0700000{ - compatible = "st,spear-spics-gpio"; - reg = <0xe0700000 0x1000>; - st-spics,peripcfg-reg = <0x3b0>; - st-spics,sw-enable-bit = <12>; - st-spics,cs-value-bit = <11>; - st-spics,cs-enable-mask = <3>; - st-spics,cs-enable-shift = <8>; - gpio-controller; - #gpio-cells = <2>; - }; - - miphy0: miphy@eb800000 { - compatible = "st,spear1310-miphy"; - reg = <0xeb800000 0x4000>; - misc = <&misc>; - phy-id = <0>; - #phy-cells = <1>; - status = "disabled"; - }; - - miphy1: miphy@eb804000 { - compatible = "st,spear1310-miphy"; - reg = <0xeb804000 0x4000>; - misc = <&misc>; - phy-id = <1>; - #phy-cells = <1>; - status = "disabled"; - }; - - miphy2: miphy@eb808000 { - compatible = "st,spear1310-miphy"; - reg = <0xeb808000 0x4000>; - misc = <&misc>; - phy-id = <2>; - #phy-cells = <1>; - status = "disabled"; - }; - - ahci0: ahci@b1000000 { - compatible = "snps,spear-ahci"; - reg = <0xb1000000 0x10000>; - interrupts = <0 68 0x4>; - phys = <&miphy0 0>; - phy-names = "sata-phy"; - status = "disabled"; - }; - - ahci1: ahci@b1800000 { - compatible = "snps,spear-ahci"; - reg = <0xb1800000 0x10000>; - interrupts = <0 69 0x4>; - phys = <&miphy1 0>; - phy-names = "sata-phy"; - status = "disabled"; - }; - - ahci2: ahci@b4000000 { - compatible = "snps,spear-ahci"; - reg = <0xb4000000 0x10000>; - interrupts = <0 70 0x4>; - phys = <&miphy2 0>; - phy-names = "sata-phy"; - status = "disabled"; - }; - - pcie0: pcie@b1000000 { - compatible = "st,spear1340-pcie", "snps,dw-pcie"; - reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; - reg-names = "dbi", "config"; - interrupts = <0 68 0x4>; - num-lanes = <1>; - phys = <&miphy0 1>; - phy-names = "pcie-phy"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ - bus-range = <0x00 0xff>; - status = "disabled"; - }; - - pcie1: pcie@b1800000 { - compatible = "st,spear1340-pcie", "snps,dw-pcie"; - reg = <0xb1800000 0x4000>, <0x90000000 0x20000>; - reg-names = "dbi", "config"; - interrupts = <0 69 0x4>; - num-lanes = <1>; - phys = <&miphy1 1>; - phy-names = "pcie-phy"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */ - bus-range = <0x00 0xff>; - status = "disabled"; - }; - - pcie2: pcie@b4000000 { - compatible = "st,spear1340-pcie", "snps,dw-pcie"; - reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>; - reg-names = "dbi", "config"; - interrupts = <0 70 0x4>; - num-lanes = <1>; - phys = <&miphy2 1>; - phy-names = "pcie-phy"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ - bus-range = <0x00 0xff>; - status = "disabled"; - }; - - gmac1: eth@5c400000 { - compatible = "st,spear600-gmac"; - reg = <0x5c400000 0x8000>; - interrupts = <0 95 0x4>; - interrupt-names = "macirq"; - phy-mode = "mii"; - status = "disabled"; - }; - - gmac2: eth@5c500000 { - compatible = "st,spear600-gmac"; - reg = <0x5c500000 0x8000>; - interrupts = <0 96 0x4>; - interrupt-names = "macirq"; - phy-mode = "mii"; - status = "disabled"; - }; - - gmac3: eth@5c600000 { - compatible = "st,spear600-gmac"; - reg = <0x5c600000 0x8000>; - interrupts = <0 97 0x4>; - interrupt-names = "macirq"; - phy-mode = "rmii"; - status = "disabled"; - }; - - gmac4: eth@5c700000 { - compatible = "st,spear600-gmac"; - reg = <0x5c700000 0x8000>; - interrupts = <0 98 0x4>; - interrupt-names = "macirq"; - phy-mode = "rgmii"; - status = "disabled"; - }; - - pinmux: pinmux@e0700000 { - compatible = "st,spear1310-pinmux"; - reg = <0xe0700000 0x1000>; - #gpio-range-cells = <3>; - }; - - apb { - i2c1: i2c@5cd00000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0x5cd00000 0x1000>; - interrupts = <0 87 0x4>; - status = "disabled"; - }; - - i2c2: i2c@5ce00000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0x5ce00000 0x1000>; - interrupts = <0 88 0x4>; - status = "disabled"; - }; - - i2c3: i2c@5cf00000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0x5cf00000 0x1000>; - interrupts = <0 89 0x4>; - status = "disabled"; - }; - - i2c4: i2c@5d000000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0x5d000000 0x1000>; - interrupts = <0 90 0x4>; - status = "disabled"; - }; - - i2c5: i2c@5d100000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0x5d100000 0x1000>; - interrupts = <0 91 0x4>; - status = "disabled"; - }; - - i2c6: i2c@5d200000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0x5d200000 0x1000>; - interrupts = <0 92 0x4>; - status = "disabled"; - }; - - i2c7: i2c@5d300000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0x5d300000 0x1000>; - interrupts = <0 93 0x4>; - status = "disabled"; - }; - - spi1: spi@5d400000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x5d400000 0x1000>; - interrupts = <0 99 0x4>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - serial@5c800000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x5c800000 0x1000>; - interrupts = <0 82 0x4>; - status = "disabled"; - }; - - serial@5c900000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x5c900000 0x1000>; - interrupts = <0 83 0x4>; - status = "disabled"; - }; - - serial@5ca00000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x5ca00000 0x1000>; - interrupts = <0 84 0x4>; - status = "disabled"; - }; - - serial@5cb00000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x5cb00000 0x1000>; - interrupts = <0 85 0x4>; - status = "disabled"; - }; - - serial@5cc00000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x5cc00000 0x1000>; - interrupts = <0 86 0x4>; - status = "disabled"; - }; - - thermal@e07008c4 { - st,thermal-flags = <0x7000>; - }; - - gpiopinctrl: gpio@d8400000 { - compatible = "st,spear-plgpio"; - reg = <0xd8400000 0x1000>; - interrupts = <0 100 0x4>; - #interrupt-cells = <1>; - interrupt-controller; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinmux 0 0 246>; - status = "disabled"; - - st-plgpio,ngpio = <246>; - st-plgpio,enb-reg = <0xd0>; - st-plgpio,wdata-reg = <0x90>; - st-plgpio,dir-reg = <0xb0>; - st-plgpio,ie-reg = <0x30>; - st-plgpio,rdata-reg = <0x70>; - st-plgpio,mis-reg = <0x10>; - st-plgpio,eit-reg = <0x50>; - }; - }; - }; -}; |