diff options
Diffstat (limited to 'sys/contrib/device-tree/src/arm64/freescale/imx8mm-venice-gw7904.dts')
| -rw-r--r-- | sys/contrib/device-tree/src/arm64/freescale/imx8mm-venice-gw7904.dts | 23 |
1 files changed, 7 insertions, 16 deletions
diff --git a/sys/contrib/device-tree/src/arm64/freescale/imx8mm-venice-gw7904.dts b/sys/contrib/device-tree/src/arm64/freescale/imx8mm-venice-gw7904.dts index d5b716855812..05489a31e7fd 100644 --- a/sys/contrib/device-tree/src/arm64/freescale/imx8mm-venice-gw7904.dts +++ b/sys/contrib/device-tree/src/arm64/freescale/imx8mm-venice-gw7904.dts @@ -330,6 +330,8 @@ interrupts = <26 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; adc { compatible = "gw,gsc-adc"; @@ -460,7 +462,7 @@ interrupts = <8 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; #clock-cells = <0>; - clocks = <&osc_32k 0>; + clocks = <&osc_32k>; clock-output-names = "clk-32k-out"; regulators { @@ -585,7 +587,6 @@ st,drdy-int-pin = <1>; interrupt-parent = <&gpio1>; interrupts = <15 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT1"; }; }; @@ -640,6 +641,8 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + cts-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -650,13 +653,6 @@ status = "okay"; }; -/* off-board RS232 */ -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - &usbotg1 { dr_mode = "host"; disable-over-current; @@ -818,6 +814,8 @@ fsl,pins = < MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26 0x140 /* CTS# in */ + MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27 0x140 /* RTS# out */ >; }; @@ -828,13 +826,6 @@ >; }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 - MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 - >; - }; - pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 |