diff options
Diffstat (limited to 'sys/contrib/device-tree/src/arm64/qcom/msm8916-asus-z00l.dts')
| -rw-r--r-- | sys/contrib/device-tree/src/arm64/qcom/msm8916-asus-z00l.dts | 151 |
1 files changed, 30 insertions, 121 deletions
diff --git a/sys/contrib/device-tree/src/arm64/qcom/msm8916-asus-z00l.dts b/sys/contrib/device-tree/src/arm64/qcom/msm8916-asus-z00l.dts index 91284a1d0966..92f695481769 100644 --- a/sys/contrib/device-tree/src/arm64/qcom/msm8916-asus-z00l.dts +++ b/sys/contrib/device-tree/src/arm64/qcom/msm8916-asus-z00l.dts @@ -13,7 +13,9 @@ chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -30,14 +32,14 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; }; button-volume-down { label = "Volume Down"; - gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 117 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <15>; }; @@ -49,7 +51,7 @@ regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; - gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; enable-active-high; startup-delay-us = <200>; @@ -60,7 +62,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -76,7 +78,7 @@ vdd-supply = <&pm8916_l8>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; @@ -86,7 +88,7 @@ compatible = "invensense,mpu6515"; reg = <0x68>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <36 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -108,10 +110,10 @@ compatible = "edt,edt-ft5306"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l11>; iovcc-supply = <&pm8916_l6>; @@ -124,16 +126,19 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { @@ -141,9 +146,9 @@ vmmc-supply = <®_sd_vmmc>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; &usb { @@ -163,110 +168,7 @@ compatible = "qcom,wcn3620"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { gpio_keys_default: gpio-keys-default-state { pins = "gpio107", "gpio117"; function = "gpio"; @@ -299,6 +201,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen-default-state { touch-pins { pins = "gpio13"; |