aboutsummaryrefslogtreecommitdiff
path: root/sys/contrib/device-tree/src/arm64/qcom/msm8996.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'sys/contrib/device-tree/src/arm64/qcom/msm8996.dtsi')
-rw-r--r--sys/contrib/device-tree/src/arm64/qcom/msm8996.dtsi325
1 files changed, 187 insertions, 138 deletions
diff --git a/sys/contrib/device-tree/src/arm64/qcom/msm8996.dtsi b/sys/contrib/device-tree/src/arm64/qcom/msm8996.dtsi
index 0cb2d4f08c3a..ee6f87c828ae 100644
--- a/sys/contrib/device-tree/src/arm64/qcom/msm8996.dtsi
+++ b/sys/contrib/device-tree/src/arm64/qcom/msm8996.dtsi
@@ -8,6 +8,8 @@
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/interconnect/qcom,msm8996.h>
+#include <dt-bindings/interconnect/qcom,msm8996-cbf.h>
+#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,apr.h>
@@ -49,6 +51,7 @@
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
clocks = <&kryocc 0>;
+ interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
@@ -67,6 +70,7 @@
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
clocks = <&kryocc 0>;
+ interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
@@ -80,6 +84,7 @@
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
clocks = <&kryocc 1>;
+ interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
operating-points-v2 = <&cluster1_opp>;
#cooling-cells = <2>;
next-level-cache = <&L2_1>;
@@ -98,6 +103,7 @@
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
clocks = <&kryocc 1>;
+ interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
operating-points-v2 = <&cluster1_opp>;
#cooling-cells = <2>;
next-level-cache = <&L2_1>;
@@ -149,91 +155,109 @@
opp-hz = /bits/ 64 <307200000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <307200>;
};
opp-422400000 {
opp-hz = /bits/ 64 <422400000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <307200>;
};
opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <307200>;
};
opp-556800000 {
opp-hz = /bits/ 64 <556800000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <307200>;
};
opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <384000>;
};
opp-729600000 {
opp-hz = /bits/ 64 <729600000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <460800>;
};
opp-844800000 {
opp-hz = /bits/ 64 <844800000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <537600>;
};
opp-960000000 {
opp-hz = /bits/ 64 <960000000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <672000>;
};
opp-1036800000 {
opp-hz = /bits/ 64 <1036800000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <672000>;
};
opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <825600>;
};
opp-1190400000 {
opp-hz = /bits/ 64 <1190400000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <825600>;
};
opp-1228800000 {
opp-hz = /bits/ 64 <1228800000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <902400>;
};
opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
opp-supported-hw = <0xd>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1056000>;
};
opp-1363200000 {
opp-hz = /bits/ 64 <1363200000>;
opp-supported-hw = <0x2>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1132800>;
};
opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
opp-supported-hw = <0xd>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1132800>;
};
opp-1478400000 {
opp-hz = /bits/ 64 <1478400000>;
opp-supported-hw = <0x9>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1190400>;
};
opp-1497600000 {
opp-hz = /bits/ 64 <1497600000>;
opp-supported-hw = <0x04>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1305600>;
};
opp-1593600000 {
opp-hz = /bits/ 64 <1593600000>;
opp-supported-hw = <0x9>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1382400>;
};
};
@@ -247,136 +271,163 @@
opp-hz = /bits/ 64 <307200000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <307200>;
};
opp-403200000 {
opp-hz = /bits/ 64 <403200000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <307200>;
};
opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <307200>;
};
opp-556800000 {
opp-hz = /bits/ 64 <556800000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <307200>;
};
opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <307200>;
};
opp-729600000 {
opp-hz = /bits/ 64 <729600000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <307200>;
};
opp-806400000 {
opp-hz = /bits/ 64 <806400000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <384000>;
};
opp-883200000 {
opp-hz = /bits/ 64 <883200000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <460800>;
};
opp-940800000 {
opp-hz = /bits/ 64 <940800000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <537600>;
};
opp-1036800000 {
opp-hz = /bits/ 64 <1036800000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <595200>;
};
opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <672000>;
};
opp-1190400000 {
opp-hz = /bits/ 64 <1190400000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <672000>;
};
opp-1248000000 {
opp-hz = /bits/ 64 <1248000000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <748800>;
};
opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <825600>;
};
opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <902400>;
};
opp-1478400000 {
opp-hz = /bits/ 64 <1478400000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <979200>;
};
opp-1555200000 {
opp-hz = /bits/ 64 <1555200000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1056000>;
};
opp-1632000000 {
opp-hz = /bits/ 64 <1632000000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1190400>;
};
opp-1708800000 {
opp-hz = /bits/ 64 <1708800000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1228800>;
};
opp-1785600000 {
opp-hz = /bits/ 64 <1785600000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1305600>;
};
opp-1804800000 {
opp-hz = /bits/ 64 <1804800000>;
opp-supported-hw = <0xe>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1305600>;
};
opp-1824000000 {
opp-hz = /bits/ 64 <1824000000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1382400>;
};
opp-1900800000 {
opp-hz = /bits/ 64 <1900800000>;
opp-supported-hw = <0x4>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1305600>;
};
opp-1920000000 {
opp-hz = /bits/ 64 <1920000000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1459200>;
};
opp-1996800000 {
opp-hz = /bits/ 64 <1996800000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1593600>;
};
opp-2073600000 {
opp-hz = /bits/ 64 <2073600000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1593600>;
};
opp-2150400000 {
opp-hz = /bits/ 64 <2150400000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
+ opp-peak-kBps = <1593600>;
};
};
@@ -393,11 +444,81 @@
reg = <0x0 0x80000000 0x0 0x0>;
};
+ etm {
+ compatible = "qcom,coresight-remote-etm";
+
+ out-ports {
+ port {
+ modem_etm_out_funnel_in2: endpoint {
+ remote-endpoint =
+ <&funnel_in2_in_modem_etm>;
+ };
+ };
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
+ rpm: remoteproc {
+ compatible = "qcom,msm8996-rpm-proc", "qcom,rpm-proc";
+
+ glink-edge {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8996";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
+ #clock-cells = <1>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8996-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp1: opp1 {
+ opp-level = <1>;
+ };
+
+ rpmpd_opp2: opp2 {
+ opp-level = <2>;
+ };
+
+ rpmpd_opp3: opp3 {
+ opp-level = <3>;
+ };
+
+ rpmpd_opp4: opp4 {
+ opp-level = <4>;
+ };
+
+ rpmpd_opp5: opp5 {
+ opp-level = <5>;
+ };
+
+ rpmpd_opp6: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -431,7 +552,7 @@
no-map;
qcom,client-id = <1>;
- qcom,vmid = <15>;
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
};
mpss_mem: mpss@88800000 {
@@ -472,62 +593,6 @@
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8996";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
- #clock-cells = <1>;
- clocks = <&xo_board>;
- clock-names = "xo";
- };
-
- rpmpd: power-controller {
- compatible = "qcom,msm8996-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp1: opp1 {
- opp-level = <1>;
- };
-
- rpmpd_opp2: opp2 {
- opp-level = <2>;
- };
-
- rpmpd_opp3: opp3 {
- opp-level = <3>;
- };
-
- rpmpd_opp4: opp4 {
- opp-level = <4>;
- };
-
- rpmpd_opp5: opp5 {
- opp-level = <5>;
- };
-
- rpmpd_opp6: opp6 {
- opp-level = <6>;
- };
- };
- };
- };
- };
-
smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
@@ -538,7 +603,7 @@
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
- interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs_glb 10>;
@@ -727,10 +792,10 @@
<&pciephy_0>,
<&pciephy_1>,
<&pciephy_2>,
- <&ssusb_phy_0>,
- <&ufsphy_lane 0>,
- <&ufsphy_lane 1>,
- <&ufsphy_lane 2>;
+ <&usb3phy>,
+ <&ufsphy 0>,
+ <&ufsphy 1>,
+ <&ufsphy 2>;
clock-names = "cxo",
"cxo2",
"sleep_clk",
@@ -747,9 +812,6 @@
compatible = "qcom,msm8996-bimc";
reg = <0x00408000 0x5a000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
};
tsens0: thermal-sensor@4a9000 {
@@ -800,18 +862,12 @@
compatible = "qcom,msm8996-cnoc";
reg = <0x00500000 0x1000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
- <&rpmcc RPM_SMD_CNOC_A_CLK>;
};
snoc: interconnect@524000 {
compatible = "qcom,msm8996-snoc";
reg = <0x00524000 0x1c000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
};
a0noc: interconnect@543000 {
@@ -831,19 +887,14 @@
compatible = "qcom,msm8996-a1noc";
reg = <0x00562000 0x5000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
};
a2noc: interconnect@583000 {
compatible = "qcom,msm8996-a2noc";
reg = <0x00583000 0x7000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
- clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
- <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+ clock-names = "aggre2_ufs_axi", "ufs_axi";
+ clocks = <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
<&gcc GCC_UFS_AXI_CLK>;
};
@@ -851,19 +902,14 @@
compatible = "qcom,msm8996-mnoc";
reg = <0x005a4000 0x1c000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a", "iface";
- clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
- <&rpmcc RPM_SMD_MMAXI_A_CLK>,
- <&mmcc AHB_CLK_SRC>;
+ clock-names = "iface";
+ clocks = <&mmcc AHB_CLK_SRC>;
};
pnoc: interconnect@5c0000 {
compatible = "qcom,msm8996-pnoc";
reg = <0x005c0000 0x3000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
- <&rpmcc RPM_SMD_PCNOC_A_CLK>;
};
tcsr_mutex: hwlock@740000 {
@@ -1075,7 +1121,7 @@
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4>;
+ interrupts = <5>;
clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_BYTE1_CLK>,
@@ -1136,11 +1182,11 @@
status = "disabled";
};
- mdss_hdmi: mdss_hdmi-tx@9a0000 {
- compatible = "qcom,mdss_hdmi-tx-8996";
- reg = <0x009a0000 0x50c>,
- <0x00070000 0x6158>,
- <0x009e0000 0xfff>;
+ mdss_hdmi: hdmi-tx@9a0000 {
+ compatible = "qcom,hdmi-tx-8996";
+ reg = <0x009a0000 0x50c>,
+ <0x00070000 0x6158>,
+ <0x009e0000 0xfff>;
reg-names = "core_physical",
"qfprom_physical",
"hdcp_physical";
@@ -1180,7 +1226,7 @@
mdss_hdmi_phy: phy@9a0600 {
#phy-cells = <0>;
- compatible = "qcom,mdss_hdmi-phy-8996";
+ compatible = "qcom,hdmi-phy-8996";
reg = <0x009a0600 0x1c4>,
<0x009a0a00 0x124>,
<0x009a0c00 0x124>,
@@ -1213,7 +1259,7 @@
reg = <0x00b00000 0x3f000>;
reg-names = "kgsl_3d0_reg_memory";
- interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mmcc GPU_GX_GFX3D_CLK>,
<&mmcc GPU_AHB_CLK>,
@@ -1995,7 +2041,7 @@
reg = <0x00624000 0x2500>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufsphy_lane>;
+ phys = <&ufsphy>;
phy-names = "ufsphy";
power-domains = <&gcc UFS_GDSC>;
@@ -2048,25 +2094,18 @@
ufsphy: phy@627000 {
compatible = "qcom,msm8996-qmp-ufs-phy";
- reg = <0x00627000 0x1c4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x00627000 0x1000>;
clocks = <&gcc GCC_UFS_CLKREF_CLK>;
clock-names = "ref";
resets = <&ufshc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufsphy_lane: phy@627400 {
- reg = <0x627400 0x12c>,
- <0x627600 0x200>,
- <0x627c00 0x1b4>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
};
camss: camss@a34000 {
@@ -2401,9 +2440,8 @@
"handover",
"stop-ack";
- clocks = <&xo_board>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- clock-names = "xo", "aggre2";
+ clocks = <&xo_board>;
+ clock-names = "xo";
memory-region = <&slpi_mem>;
@@ -2448,10 +2486,15 @@
<&gcc GCC_MSS_GPLL0_DIV_CLK>,
<&gcc GCC_MSS_SNOC_AXI_CLK>,
<&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
- <&rpmcc RPM_SMD_PCNOC_CLK>,
<&rpmcc RPM_SMD_QDSS_CLK>;
- clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
- "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+ clock-names = "iface",
+ "bus",
+ "mem",
+ "xo",
+ "gpll0_mss",
+ "snoc_axi",
+ "mnoc_axi",
+ "qdss";
resets = <&gcc GCC_MSS_RESTART>;
reset-names = "mss_restart";
@@ -2592,6 +2635,14 @@
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
+ in-ports {
+ port {
+ funnel_in2_in_modem_etm: endpoint {
+ remote-endpoint =
+ <&modem_etm_out_funnel_in2>;
+ };
+ };
+ };
out-ports {
port {
@@ -3003,8 +3054,8 @@
usb3_dwc3: usb@6a00000 {
compatible = "snps,dwc3";
reg = <0x06a00000 0xcc00>;
- interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hsusb_phy1>, <&usb3phy>;
phy-names = "usb2-phy", "usb3-phy";
snps,hird-threshold = /bits/ 8 <0>;
snps,dis_u2_susphy_quirk;
@@ -3016,32 +3067,26 @@
usb3phy: phy@7410000 {
compatible = "qcom,msm8996-qmp-usb3-phy";
- reg = <0x07410000 0x1c4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x07410000 0x1000>;
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
+ <&gcc GCC_USB3_CLKREF_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
resets = <&gcc GCC_USB3_PHY_BCR>,
- <&gcc GCC_USB3PHY_PHY_BCR>;
- reset-names = "phy", "common";
- status = "disabled";
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
- ssusb_phy_0: phy@7410200 {
- reg = <0x07410200 0x200>,
- <0x07410400 0x130>,
- <0x07410600 0x1a8>;
- #phy-cells = <0>;
-
- #clock-cells = <0>;
- clock-output-names = "usb3_phy_pipe_clk_src";
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- };
+ status = "disabled";
};
hsusb_phy1: phy@7411000 {
@@ -3336,6 +3381,9 @@
#size-cells = <1>;
ranges;
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq";
+
clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
<&gcc GCC_USB20_MASTER_CLK>,
<&gcc GCC_USB20_MOCK_UTMI_CLK>,
@@ -3358,7 +3406,7 @@
usb2_dwc3: usb@7600000 {
compatible = "snps,dwc3";
reg = <0x07600000 0xcc00>;
- interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hsusb_phy2>;
phy-names = "usb2-phy";
maximum-speed = "high-speed";
@@ -3372,7 +3420,7 @@
qcom,controlled-remotely;
reg = <0x09184000 0x32000>;
num-channels = <31>;
- interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <1>;
qcom,num-ees = <2>;
@@ -3381,7 +3429,7 @@
slim_msm: slim-ngd@91c0000 {
compatible = "qcom,slim-ngd-v1.5.0";
reg = <0x091c0000 0x2c000>;
- interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&slimbam 3>, <&slimbam 4>;
dma-names = "rx", "tx";
#address-cells = <1>;
@@ -3551,6 +3599,7 @@
reg = <0x09a11000 0x10000>;
clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
#clock-cells = <0>;
+ #interconnect-cells = <1>;
};
intc: interrupt-controller@9bc0000 {
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-16 23:32:15 +0000