diff options
Diffstat (limited to 'sys/contrib/device-tree/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts')
| -rw-r--r-- | sys/contrib/device-tree/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts | 216 |
1 files changed, 204 insertions, 12 deletions
diff --git a/sys/contrib/device-tree/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts b/sys/contrib/device-tree/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts index fe3b366e1435..0c22f3efec20 100644 --- a/sys/contrib/device-tree/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts +++ b/sys/contrib/device-tree/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts @@ -6,6 +6,7 @@ /dts-v1/; +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> @@ -36,7 +37,7 @@ pinctrl-0 = <&hall_int_active_state>; pinctrl-names = "default"; - lid { + lid-switch { gpios = <&tlmm 121 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; @@ -45,6 +46,84 @@ }; }; + pmic-glink { + compatible = "qcom,sc8180x-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_con0_hs: endpoint { + remote-endpoint = <&usb_prim_role_switch>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_con0_ss: endpoint { + remote-endpoint = <&usb_prim_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_con0_sbu: endpoint { + remote-endpoint = <&usbprim_sbu_mux>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + pmic_glink_con1_hs: endpoint { + remote-endpoint = <&usb_sec_role_switch>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_con1_ss: endpoint { + remote-endpoint = <&usb_sec_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_con1_sbu: endpoint { + remote-endpoint = <&usbsec_sbu_mux>; + }; + }; + }; + }; + }; + reserved-memory { rmtfs_mem: rmtfs-region@85500000 { compatible = "qcom,rmtfs-mem"; @@ -52,7 +131,7 @@ no-map; qcom,client-id = <1>; - qcom,vmid = <15>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; wlan_mem: wlan-region@8bc00000 { @@ -100,6 +179,44 @@ vin-supply = <&vph_pwr>; }; + + usbprim-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usbprim_sbu_default>; + + mode-switch; + orientation-switch; + + port { + usbprim_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con0_sbu>; + }; + }; + }; + + usbsec-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 188 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 187 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usbsec_sbu_default>; + + mode-switch; + orientation-switch; + + port { + usbsec_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con1_sbu>; + }; + }; + }; }; &apps_rsc { @@ -283,6 +400,24 @@ status = "okay"; }; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_prim_qmpphy_dp_in>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_sec_qmpphy_dp_in>; +}; + &mdss_edp { data-lanes = <0 1 2 3>; @@ -298,11 +433,9 @@ backlight = <&backlight>; - ports { - port { - auo_b140han06_in: endpoint { - remote-endpoint = <&mdss_edp_out>; - }; + port { + auo_b140han06_in: endpoint { + remote-endpoint = <&mdss_edp_out>; }; }; }; @@ -319,8 +452,8 @@ }; &pcie3 { - perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 180 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&pcie3_default_state>; pinctrl-names = "default"; @@ -419,6 +552,8 @@ vdda-phy-supply = <&vreg_l3c_1p2>; vdda-pll-supply = <&vreg_l5e_0p88>; + orientation-switch; + status = "okay"; }; @@ -430,6 +565,18 @@ dr_mode = "host"; }; +&usb_prim_qmpphy_dp_in { + remote-endpoint = <&mdss_dp0_out>; +}; + +&usb_prim_qmpphy_out { + remote-endpoint = <&pmic_glink_con0_ss>; +}; + +&usb_prim_role_switch { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_sec_hsphy { vdda-pll-supply = <&vreg_l5e_0p88>; vdda18-supply = <&vreg_l12a_1p8>; @@ -442,9 +589,23 @@ vdda-phy-supply = <&vreg_l3c_1p2>; vdda-pll-supply = <&vreg_l5e_0p88>; + orientation-switch; + status = "okay"; }; +&usb_sec_qmpphy_dp_in { + remote-endpoint = <&mdss_dp1_out>; +}; + +&usb_sec_qmpphy_out { + remote-endpoint = <&pmic_glink_con1_ss>; +}; + +&usb_sec_role_switch { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &usb_sec { status = "okay"; }; @@ -497,7 +658,6 @@ pins = "gpio121"; function = "gpio"; - input-enable; bias-disable; }; @@ -513,7 +673,6 @@ pins = "gpio122"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; @@ -530,7 +689,6 @@ pins = "gpio37", "gpio24"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; @@ -560,6 +718,40 @@ }; }; + usbprim_sbu_default: usbprim-sbu-state { + oe-n-pins { + pins = "gpio152"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + + sel-pins { + pins = "gpio100"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + }; + + usbsec_sbu_default: usbsec-sbu-state { + oe-n-pins { + pins = "gpio188"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + + sel-pins { + pins = "gpio187"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + }; + uart13_state: uart13-state { cts-pins { pins = "gpio43"; |