diff options
Diffstat (limited to 'sys/contrib/device-tree/src/arm64/qcom/sc8180x-pmics.dtsi')
| -rw-r--r-- | sys/contrib/device-tree/src/arm64/qcom/sc8180x-pmics.dtsi | 36 |
1 files changed, 19 insertions, 17 deletions
diff --git a/sys/contrib/device-tree/src/arm64/qcom/sc8180x-pmics.dtsi b/sys/contrib/device-tree/src/arm64/qcom/sc8180x-pmics.dtsi index 8247af01c84a..ddc84282f142 100644 --- a/sys/contrib/device-tree/src/arm64/qcom/sc8180x-pmics.dtsi +++ b/sys/contrib/device-tree/src/arm64/qcom/sc8180x-pmics.dtsi @@ -74,7 +74,7 @@ #address-cells = <1>; #size-cells = <0>; - pon: power-on@800 { + pon: pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; pwrkey { @@ -105,19 +105,19 @@ #io-channel-cells = <1>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - ref-gnd@0 { + channel@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; label = "ref_gnd"; }; - vref-1p25@1 { + channel@1 { reg = <ADC5_1P25VREF>; qcom,pre-scaling = <1 1>; label = "vref_1p25"; }; - die-temp@6 { + channel@6 { reg = <ADC5_DIE_TEMP>; qcom,pre-scaling = <1 1>; label = "die_temp"; @@ -142,9 +142,10 @@ }; pmc8180_gpios: gpio@c000 { - compatible = "qcom,pmc8180-gpio"; + compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pmc8180_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -172,19 +173,19 @@ #io-channel-cells = <1>; interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - ref-gnd@0 { + channel@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; label = "ref_gnd"; }; - vref-1p25@1 { + channel@1 { reg = <ADC5_1P25VREF>; qcom,pre-scaling = <1 1>; label = "vref_1p25"; }; - vcoin@85 { + channel@85 { reg = <0x85>; qcom,pre-scaling = <1 1>; label = "vcoin2"; @@ -220,19 +221,19 @@ #io-channel-cells = <1>; interrupts = <0xa 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - ref-gnd@0 { + channel@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; label = "ref_gnd"; }; - vref-1p25@1 { + channel@1 { reg = <ADC5_1P25VREF>; qcom,pre-scaling = <1 1>; label = "vref_1p25"; }; - vcoin@85 { + channel@85 { reg = <0x85>; qcom,pre-scaling = <1 1>; label = "vcoin"; @@ -246,7 +247,7 @@ #address-cells = <1>; #size-cells = <0>; - power-on@800 { + pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; @@ -270,19 +271,19 @@ #io-channel-cells = <1>; interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - ref-gnd@0 { + channel@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; label = "ref_gnd"; }; - vref-1p25@1 { + channel@1 { reg = <ADC5_1P25VREF>; qcom,pre-scaling = <1 1>; label = "vref_1p25"; }; - die-temp@6 { + channel@6 { reg = <ADC5_DIE_TEMP>; qcom,pre-scaling = <1 1>; label = "die_temp"; @@ -300,9 +301,10 @@ }; pmc8180c_gpios: gpio@c000 { - compatible = "qcom,pmc8180c-gpio"; + compatible = "qcom,pmc8180c-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pmc8180c_gpios 0 0 12>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -313,7 +315,7 @@ compatible = "qcom,pmc8180c", "qcom,spmi-pmic"; reg = <0x5 SPMI_USID>; - pmc8180c_lpg: lpg { + pmc8180c_lpg: pwm { compatible = "qcom,pmc8180c-lpg"; #address-cells = <1>; |