aboutsummaryrefslogtreecommitdiff
path: root/sys/contrib/device-tree/src/arm64/qcom/sm8250.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'sys/contrib/device-tree/src/arm64/qcom/sm8250.dtsi')
-rw-r--r--sys/contrib/device-tree/src/arm64/qcom/sm8250.dtsi1111
1 files changed, 798 insertions, 313 deletions
diff --git a/sys/contrib/device-tree/src/arm64/qcom/sm8250.dtsi b/sys/contrib/device-tree/src/arm64/qcom/sm8250.dtsi
index 1efa07f2caff..760501c1301a 100644
--- a/sys/contrib/device-tree/src/arm64/qcom/sm8250.dtsi
+++ b/sys/contrib/device-tree/src/arm64/qcom/sm8250.dtsi
@@ -15,7 +15,9 @@
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sm8250.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,q6afe.h>
@@ -100,7 +102,7 @@
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
capacity-dmips-mhz = <448>;
- dynamic-power-coefficient = <205>;
+ dynamic-power-coefficient = <105>;
next-level-cache = <&L2_0>;
power-domains = <&CPU_PD0>;
power-domain-names = "psci";
@@ -131,7 +133,7 @@
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
capacity-dmips-mhz = <448>;
- dynamic-power-coefficient = <205>;
+ dynamic-power-coefficient = <105>;
next-level-cache = <&L2_100>;
power-domains = <&CPU_PD1>;
power-domain-names = "psci";
@@ -156,7 +158,7 @@
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
capacity-dmips-mhz = <448>;
- dynamic-power-coefficient = <205>;
+ dynamic-power-coefficient = <105>;
next-level-cache = <&L2_200>;
power-domains = <&CPU_PD2>;
power-domain-names = "psci";
@@ -181,7 +183,7 @@
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
capacity-dmips-mhz = <448>;
- dynamic-power-coefficient = <205>;
+ dynamic-power-coefficient = <105>;
next-level-cache = <&L2_300>;
power-domains = <&CPU_PD3>;
power-domain-names = "psci";
@@ -370,6 +372,12 @@
};
};
+ qup_virt: interconnect-qup-virt {
+ compatible = "qcom,sm8250-qup-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
cpu0_opp_table: opp-table-cpu0 {
compatible = "operating-points-v2";
opp-shared;
@@ -663,6 +671,7 @@
firmware {
scm: scm {
compatible = "qcom,scm-sm8250", "qcom,scm";
+ qcom,dload-mode = <&tcsr 0x13000>;
#reset-cells = <1>;
};
};
@@ -1022,6 +1031,13 @@
dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
<&gpi_dma2 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1036,8 +1052,14 @@
dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
<&gpi_dma2 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1054,6 +1076,13 @@
dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
<&gpi_dma2 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1068,8 +1097,14 @@
dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
<&gpi_dma2 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1086,6 +1121,13 @@
dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
<&gpi_dma2 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1100,8 +1142,14 @@
dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
<&gpi_dma2 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1118,6 +1166,13 @@
dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
<&gpi_dma2 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1132,8 +1187,14 @@
dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
<&gpi_dma2 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1147,8 +1208,12 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart17_default>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
status = "disabled";
};
@@ -1163,6 +1228,13 @@
dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
<&gpi_dma2 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1177,8 +1249,14 @@
dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
<&gpi_dma2 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1192,8 +1270,12 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart18_default>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
status = "disabled";
};
@@ -1208,6 +1290,13 @@
dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
<&gpi_dma2 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1222,8 +1311,14 @@
dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
<&gpi_dma2 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1276,6 +1371,13 @@
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
<&gpi_dma0 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1290,8 +1392,14 @@
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
<&gpi_dma0 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1308,6 +1416,13 @@
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1322,8 +1437,14 @@
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
<&gpi_dma0 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1340,6 +1461,13 @@
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1354,8 +1482,14 @@
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1369,8 +1503,12 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
status = "disabled";
};
@@ -1385,6 +1523,13 @@
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1399,8 +1544,14 @@
dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
<&gpi_dma0 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1417,6 +1568,13 @@
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
<&gpi_dma0 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1431,8 +1589,14 @@
dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
<&gpi_dma0 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1449,6 +1613,13 @@
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1463,8 +1634,14 @@
dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
<&gpi_dma0 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1481,6 +1658,13 @@
dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
<&gpi_dma0 1 6 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1495,8 +1679,14 @@
dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
<&gpi_dma0 1 6 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1510,8 +1700,12 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
status = "disabled";
};
@@ -1526,6 +1720,13 @@
dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
<&gpi_dma0 1 7 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1540,8 +1741,14 @@
dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
<&gpi_dma0 1 7 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1591,6 +1798,13 @@
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
<&gpi_dma1 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1605,8 +1819,14 @@
dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
<&gpi_dma1 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1623,6 +1843,13 @@
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
<&gpi_dma1 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1637,8 +1864,14 @@
dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
<&gpi_dma1 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1655,6 +1888,13 @@
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
<&gpi_dma1 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1669,8 +1909,14 @@
dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
<&gpi_dma1 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1687,6 +1933,13 @@
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
<&gpi_dma1 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1701,8 +1954,14 @@
dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
<&gpi_dma1 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1719,6 +1978,13 @@
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
<&gpi_dma1 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1733,8 +1999,14 @@
dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
<&gpi_dma1 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1748,8 +2020,12 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
status = "disabled";
};
@@ -1764,6 +2040,13 @@
dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
<&gpi_dma1 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
+ power-domains = <&rpmhpd SM8250_CX>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1778,8 +2061,14 @@
dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
<&gpi_dma1 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table>;
+ interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1835,7 +2124,7 @@
qcom,bcm-voters = <&apps_bcm_voter>;
};
- pcie0: pci@1c00000 {
+ pcie0: pcie@1c00000 {
compatible = "qcom,pcie-sm8250";
reg = <0 0x01c00000 0 0x3000>,
<0 0x60000000 0 0xf1d>,
@@ -1897,7 +2186,7 @@
power-domains = <&gcc PCIE_0_GDSC>;
- phys = <&pcie0_lane>;
+ phys = <&pcie0_phy>;
phy-names = "pciephy";
perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
@@ -1905,21 +2194,30 @@
pinctrl-names = "default";
pinctrl-0 = <&pcie0_default_state>;
+ dma-coherent;
status = "disabled";
};
pcie0_phy: phy@1c06000 {
compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
- reg = <0 0x01c06000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c06000 0 0x1000>;
+
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_WIFI_CLKREF_EN>,
- <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
@@ -1928,23 +2226,9 @@
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie0_lane: phy@1c06200 {
- reg = <0 0x01c06200 0 0x170>, /* tx */
- <0 0x01c06400 0 0x200>, /* rx */
- <0 0x01c06800 0 0x1f0>, /* pcs */
- <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
-
- #phy-cells = <0>;
-
- #clock-cells = <0>;
- clock-output-names = "pcie_0_pipe_clk";
- };
};
- pcie1: pci@1c08000 {
+ pcie1: pcie@1c08000 {
compatible = "qcom,pcie-sm8250";
reg = <0 0x01c08000 0 0x3000>,
<0 0x40000000 0 0xf1d>,
@@ -2003,7 +2287,7 @@
power-domains = <&gcc PCIE_1_GDSC>;
- phys = <&pcie1_lane>;
+ phys = <&pcie1_phy>;
phy-names = "pciephy";
perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
@@ -2011,21 +2295,30 @@
pinctrl-names = "default";
pinctrl-0 = <&pcie1_default_state>;
+ dma-coherent;
status = "disabled";
};
pcie1_phy: phy@1c0e000 {
compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
- reg = <0 0x01c0e000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c0e000 0 0x1000>;
+
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
- <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_1_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
@@ -2034,25 +2327,9 @@
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie1_lane: phy@1c0e200 {
- reg = <0 0x01c0e200 0 0x170>, /* tx0 */
- <0 0x01c0e400 0 0x200>, /* rx0 */
- <0 0x01c0ea00 0 0x1f0>, /* pcs */
- <0 0x01c0e600 0 0x170>, /* tx1 */
- <0 0x01c0e800 0 0x200>, /* rx1 */
- <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe0";
-
- #phy-cells = <0>;
-
- #clock-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
- };
};
- pcie2: pci@1c10000 {
+ pcie2: pcie@1c10000 {
compatible = "qcom,pcie-sm8250";
reg = <0 0x01c10000 0 0x3000>,
<0 0x64000000 0 0xf1d>,
@@ -2111,7 +2388,7 @@
power-domains = <&gcc PCIE_2_GDSC>;
- phys = <&pcie2_lane>;
+ phys = <&pcie2_phy>;
phy-names = "pciephy";
perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
@@ -2119,21 +2396,30 @@
pinctrl-names = "default";
pinctrl-0 = <&pcie2_default_state>;
+ dma-coherent;
status = "disabled";
};
pcie2_phy: phy@1c16000 {
compatible = "qcom,sm8250-qmp-modem-pcie-phy";
- reg = <0 0x01c16000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c16000 0 0x1000>;
+
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
<&gcc GCC_PCIE_MDM_CLKREF_EN>,
- <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_2_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_2_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_2_PHY_BCR>;
reset-names = "phy";
@@ -2142,22 +2428,6 @@
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie2_lane: phy@1c16200 {
- reg = <0 0x01c16200 0 0x170>, /* tx0 */
- <0 0x01c16400 0 0x200>, /* rx0 */
- <0 0x01c16a00 0 0x1f0>, /* pcs */
- <0 0x01c16600 0 0x170>, /* tx1 */
- <0 0x01c16800 0 0x200>, /* rx1 */
- <0 0x01c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
- clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
- clock-names = "pipe0";
-
- #phy-cells = <0>;
-
- #clock-cells = <0>;
- clock-output-names = "pcie_2_pipe_clk";
- };
};
ufs_mem_hc: ufshc@1d84000 {
@@ -2165,7 +2435,7 @@
"jedec,ufs-2.0";
reg = <0 0x01d84000 0 0x3000>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
+ phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
@@ -2194,25 +2464,48 @@
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
- freq-table-hz =
- <37500000 300000000>,
- <0 0>,
- <0 0>,
- <37500000 300000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>;
+
+ operating-points-v2 = <&ufs_opp_table>;
+
+ interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+ interconnect-names = "ufs-ddr", "cpu-ufs";
status = "disabled";
+
+ ufs_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-37500000 {
+ opp-hz = /bits/ 64 <37500000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <37500000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <300000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
};
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sm8250-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01d87000 0 0x1000>;
+
clock-names = "ref",
"ref_aux";
clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -2220,16 +2513,10 @@
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x16c>,
- <0 0x01d87600 0 0x200>,
- <0 0x01d87c00 0 0x200>,
- <0 0x01d87800 0 0x16c>,
- <0 0x01d87a00 0 0x200>;
- #phy-cells = <0>;
- };
+ #phy-cells = <0>;
+
+ status = "disabled";
};
cryptobam: dma-controller@1dc4000 {
@@ -2270,6 +2557,11 @@
#hwlock-cells = <1>;
};
+ tcsr: syscon@1fc0000 {
+ compatible = "qcom,sm8250-tcsr", "syscon";
+ reg = <0x0 0x1fc0000 0x0 0x30000>;
+ };
+
wsamacro: codec@3240000 {
compatible = "qcom,sm8250-lpass-wsa-macro";
reg = <0 0x03240000 0 0x1000>;
@@ -2292,7 +2584,7 @@
status = "disabled";
};
- swr0: soundwire-controller@3250000 {
+ swr0: soundwire@3250000 {
reg = <0 0x03250000 0 0x2000>;
compatible = "qcom,soundwire-v1.5.1";
interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
@@ -2358,7 +2650,7 @@
#sound-dai-cells = <1>;
};
- swr1: soundwire-controller@3210000 {
+ swr1: soundwire@3210000 {
reg = <0 0x03210000 0 0x2000>;
compatible = "qcom,soundwire-v1.5.1";
status = "disabled";
@@ -2405,7 +2697,7 @@
};
/* tx macro */
- swr2: soundwire-controller@3230000 {
+ swr2: soundwire@3230000 {
reg = <0 0x03230000 0 0x2000>;
compatible = "qcom,soundwire-v1.5.1";
interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
@@ -2726,6 +3018,7 @@
clock-names = "ahb", "bus", "iface";
power-domains = <&gpucc GPU_CX_GDSC>;
+ dma-coherent;
};
slpi: remoteproc@5c00000 {
@@ -2743,8 +3036,8 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd SM8250_LCX>,
- <&rpmhpd SM8250_LMX>;
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
power-domain-names = "lcx", "lmx";
memory-region = <&slpi_mem>;
@@ -2821,11 +3114,8 @@
clock-names = "apb_pclk";
out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port {
tpda_out_funnel_qatb: endpoint {
remote-endpoint = <&funnel_qatb_in_tpda>;
};
@@ -2868,11 +3158,7 @@
};
in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ port {
funnel_qatb_in_tpda: endpoint {
remote-endpoint = <&tpda_out_funnel_qatb>;
};
@@ -3059,7 +3345,7 @@
port@7 {
reg = <7>;
funnel_swao_in_funnel_merg: endpoint {
- remote-endpoint= <&funnel_merg_out_funnel_swao>;
+ remote-endpoint = <&funnel_merg_out_funnel_swao>;
};
};
};
@@ -3081,11 +3367,8 @@
};
in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port {
etf_in_funnel_swao_out: endpoint {
remote-endpoint = <&funnel_swao_out_etf>;
};
@@ -3169,8 +3452,6 @@
clock-names = "apb_pclk";
out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
port {
tpdm_mm_out_tpda9: endpoint {
remote-endpoint = <&tpda_9_in_tpdm_mm>;
@@ -3436,11 +3717,7 @@
};
in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ port {
funnel_apss_merg_in_funnel_apss: endpoint {
remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
};
@@ -3463,7 +3740,7 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
memory-region = <&cdsp_mem>;
@@ -3571,78 +3848,70 @@
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
};
- usb_1_qmpphy: phy@88e9000 {
+ usb_1_qmpphy: phy@88e8000 {
compatible = "qcom,sm8250-qmp-usb3-dp-phy";
- reg = <0 0x088e9000 0 0x200>,
- <0 0x088e8000 0 0x40>,
- <0 0x088ea000 0 0x200>;
+ reg = <0 0x088e8000 0 0x3000>;
status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
- clock-names = "aux", "ref_clk_src", "com_aux";
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
<&gcc GCC_USB3_PHY_PRIM_BCR>;
reset-names = "phy", "common";
- usb_1_ssphy: usb3-phy@88e9200 {
- reg = <0 0x088e9200 0 0x200>,
- <0 0x088e9400 0 0x200>,
- <0 0x088e9c00 0 0x400>,
- <0 0x088e9600 0 0x200>,
- <0 0x088e9800 0 0x200>,
- <0 0x088e9a00 0 0x100>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_phy_pipe_clk_src";
- };
+ #clock-cells = <1>;
+ #phy-cells = <1>;
- dp_phy: dp-phy@88ea200 {
- reg = <0 0x088ea200 0 0x200>,
- <0 0x088ea400 0 0x200>,
- <0 0x088eaa00 0 0x200>,
- <0 0x088ea600 0 0x200>,
- <0 0x088ea800 0 0x200>;
- #phy-cells = <0>;
- #clock-cells = <1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_1_qmpphy_out: endpoint {};
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_1_qmpphy_dp_in: endpoint {};
+ };
};
};
usb_2_qmpphy: phy@88eb000 {
compatible = "qcom,sm8250-qmp-usb3-uni-phy";
- reg = <0 0x088eb000 0 0x200>;
- status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x088eb000 0 0x1000>;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_EN>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
- clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
- resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
- <&gcc GCC_USB3_PHY_SEC_BCR>;
- reset-names = "phy", "common";
+ resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+ <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+ reset-names = "phy",
+ "phy_phy";
- usb_2_ssphy: phy@88eb200 {
- reg = <0 0x088eb200 0 0x200>,
- <0 0x088eb400 0 0x200>,
- <0 0x088eb800 0 0x800>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
+ status = "disabled";
};
sdhc_2: mmc@8804000 {
@@ -3660,7 +3929,7 @@
iommus = <&apps_smmu 0x4a0 0x0>;
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040868>;
- power-domains = <&rpmhpd SM8250_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&sdhc2_opp_table>;
status = "disabled";
@@ -3690,6 +3959,128 @@
};
};
+ pmu@9091000 {
+ compatible = "qcom,sm8250-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+ reg = <0 0x09091000 0 0x1000>;
+
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+ interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI_CH0 3>;
+
+ operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+ llcc_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-800000 {
+ opp-peak-kBps = <(200 * 4 * 1000)>;
+ };
+
+ opp-1200000 {
+ opp-peak-kBps = <(300 * 4 * 1000)>;
+ };
+
+ opp-1804000 {
+ opp-peak-kBps = <(451 * 4 * 1000)>;
+ };
+
+ opp-2188000 {
+ opp-peak-kBps = <(547 * 4 * 1000)>;
+ };
+
+ opp-2724000 {
+ opp-peak-kBps = <(681 * 4 * 1000)>;
+ };
+
+ opp-3072000 {
+ opp-peak-kBps = <(768 * 4 * 1000)>;
+ };
+
+ opp-4068000 {
+ opp-peak-kBps = <(1017 * 4 * 1000)>;
+ };
+
+ /* 1353 MHz, LPDDR4X */
+
+ opp-6220000 {
+ opp-peak-kBps = <(1555 * 4 * 1000)>;
+ };
+
+ opp-7216000 {
+ opp-peak-kBps = <(1804 * 4 * 1000)>;
+ };
+
+ opp-8368000 {
+ opp-peak-kBps = <(2092 * 4 * 1000)>;
+ };
+
+ /* LPDDR5 */
+ opp-10944000 {
+ opp-peak-kBps = <(2736 * 4 * 1000)>;
+ };
+ };
+ };
+
+ pmu@90b6400 {
+ compatible = "qcom,sm8250-cpu-bwmon", "qcom,sdm845-bwmon";
+ reg = <0 0x090b6400 0 0x600>;
+
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+ interconnects = <&gem_noc MASTER_AMPSS_M0 3 &gem_noc SLAVE_LLCC 3>;
+ operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+ cpu_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-800000 {
+ opp-peak-kBps = <(200 * 4 * 1000)>;
+ };
+
+ opp-1804000 {
+ opp-peak-kBps = <(451 * 4 * 1000)>;
+ };
+
+ opp-2188000 {
+ opp-peak-kBps = <(547 * 4 * 1000)>;
+ };
+
+ opp-2724000 {
+ opp-peak-kBps = <(681 * 4 * 1000)>;
+ };
+
+ opp-3072000 {
+ opp-peak-kBps = <(768 * 4 * 1000)>;
+ };
+
+ /* 1017MHz, 1353 MHz, LPDDR4X */
+
+ opp-6220000 {
+ opp-peak-kBps = <(1555 * 4 * 1000)>;
+ };
+
+ opp-6832000 {
+ opp-peak-kBps = <(1708 * 4 * 1000)>;
+ };
+
+ opp-8368000 {
+ opp-peak-kBps = <(2092 * 4 * 1000)>;
+ };
+
+ /* 2133MHz, LPDDR4X */
+
+ /* LPDDR5 */
+ opp-10944000 {
+ opp-peak-kBps = <(2736 * 4 * 1000)>;
+ };
+
+ /* LPDDR5 */
+ opp-12784000 {
+ opp-peak-kBps = <(3196 * 4 * 1000)>;
+ };
+ };
+ };
+
dc_noc: interconnect@90c0000 {
compatible = "qcom,sm8250-dc-noc";
reg = <0 0x090c0000 0 0x4200>;
@@ -3747,6 +4138,7 @@
"dp_hs_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
+ wakeup-source;
resets = <&gcc GCC_USB30_PRIM_BCR>;
@@ -3761,8 +4153,12 @@
iommus = <&apps_smmu 0x0 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
+
+ port {
+ usb_1_role_switch_out: endpoint {};
+ };
};
};
@@ -3811,6 +4207,7 @@
"dp_hs_phy_irq";
power-domains = <&gcc USB30_SEC_GDSC>;
+ wakeup-source;
resets = <&gcc GCC_USB30_SEC_BCR>;
@@ -3825,7 +4222,7 @@
iommus = <&apps_smmu 0x20 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+ phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
@@ -3836,7 +4233,7 @@
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&videocc MVS0C_GDSC>,
<&videocc MVS0_GDSC>,
- <&rpmhpd SM8250_MX>;
+ <&rpmhpd RPMHPD_MX>;
power-domain-names = "venus", "vcodec0", "mx";
operating-points-v2 = <&venus_opp_table>;
@@ -3897,7 +4294,7 @@
clocks = <&gcc GCC_VIDEO_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
clock-names = "iface", "bi_tcxo", "bi_tcxo_ao";
#clock-cells = <1>;
@@ -4177,7 +4574,7 @@
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
#clock-cells = <1>;
@@ -4230,7 +4627,7 @@
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
@@ -4252,6 +4649,14 @@
remote-endpoint = <&mdss_dsi1_in>;
};
};
+
+ port@2 {
+ reg = <2>;
+
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&mdss_dp_in>;
+ };
+ };
};
mdp_opp_table: opp-table {
@@ -4279,6 +4684,85 @@
};
};
+ mdss_dp: displayport-controller@ae90000 {
+ compatible = "qcom,sm8250-dp", "qcom,sm8350-dp";
+ reg = <0 0xae90000 0 0x200>,
+ <0 0xae90200 0 0x200>,
+ <0 0xae90400 0 0x600>,
+ <0 0xae91000 0 0x400>,
+ <0 0xae91400 0 0x400>;
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp_out: endpoint {
+ };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
mdss_dsi0: dsi@ae94000 {
compatible = "qcom,sm8250-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
@@ -4305,7 +4789,7 @@
assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&mdss_dsi0_phy>;
@@ -4397,7 +4881,7 @@
assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
phys = <&mdss_dsi1_phy>;
@@ -4448,15 +4932,15 @@
dispcc: clock-controller@af00000 {
compatible = "qcom,sm8250-dispcc";
reg = <0 0x0af00000 0 0x10000>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&mdss_dsi0_phy 0>,
<&mdss_dsi0_phy 1>,
<&mdss_dsi1_phy 0>,
<&mdss_dsi1_phy 1>,
- <&dp_phy 0>,
- <&dp_phy 1>;
+ <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
clock-names = "bi_tcxo",
"dsi0_phy_pll_out_byteclk",
"dsi0_phy_pll_out_dsiclk",
@@ -5298,104 +5782,105 @@
reg = <0 0x15000000 0 0x100000>;
#iommu-cells = <2>;
#global-interrupts = <2>;
- interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
};
adsp: remoteproc@17300000 {
@@ -5413,8 +5898,8 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd SM8250_LCX>,
- <&rpmhpd SM8250_LMX>;
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
power-domain-names = "lcx", "lmx";
memory-region = <&adsp_mem>;
@@ -5532,7 +6017,7 @@
compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
timer@17c20000 {
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-16 21:21:26 +0000