diff options
Diffstat (limited to 'sys/contrib/device-tree/src/arm64/ti/k3-am642-sk.dts')
| -rw-r--r-- | sys/contrib/device-tree/src/arm64/ti/k3-am642-sk.dts | 47 |
1 files changed, 40 insertions, 7 deletions
diff --git a/sys/contrib/device-tree/src/arm64/ti/k3-am642-sk.dts b/sys/contrib/device-tree/src/arm64/ti/k3-am642-sk.dts index cbce43dbe3f9..1dddd6fc1a0d 100644 --- a/sys/contrib/device-tree/src/arm64/ti/k3-am642-sk.dts +++ b/sys/contrib/device-tree/src/arm64/ti/k3-am642-sk.dts @@ -5,13 +5,14 @@ /dts-v1/; -#include <dt-bindings/mux/ti-serdes.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/net/ti-dp83867.h> #include <dt-bindings/leds/common.h> #include "k3-am642.dtsi" +#include "k3-serdes.h" + / { compatible = "ti,am642-sk", "ti,am642"; model = "Texas Instruments AM642 SK"; @@ -33,6 +34,7 @@ }; memory@80000000 { + bootph-pre-ram; device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; @@ -106,6 +108,7 @@ vusb_main: regulator-0 { /* USB MAIN INPUT 5V DC */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vusb_main5v0"; regulator-min-microvolt = <5000000>; @@ -116,6 +119,7 @@ vcc_3v3_sys: regulator-1 { /* output of LP8733xx */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vcc_3v3_sys"; regulator-min-microvolt = <3300000>; @@ -127,6 +131,7 @@ vdd_mmc1: regulator-2 { /* TPS2051BD */ + bootph-all; compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; regulator-min-microvolt = <3300000>; @@ -233,6 +238,7 @@ &main_pmx0 { main_mmc1_pins_default: main-mmc1-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */ AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ @@ -247,6 +253,7 @@ }; main_uart0_pins_default: main-uart0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ @@ -256,6 +263,7 @@ }; main_uart1_pins_default: main-uart1-default-pins { + bootph-pre-ram; pinctrl-single,pins = < AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ @@ -265,12 +273,14 @@ }; main_usb0_pins_default: main-usb0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; }; main_i2c0_pins_default: main-i2c0-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ @@ -278,6 +288,7 @@ }; main_i2c1_pins_default: main-i2c1-default-pins { + bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ @@ -366,6 +377,7 @@ }; &main_uart0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; @@ -374,12 +386,14 @@ &main_uart1 { /* main_uart1 is reserved for firmware usage */ + bootph-pre-ram; status = "reserved"; pinctrl-names = "default"; pinctrl-0 = <&main_uart1_pins_default>; }; &main_i2c0 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; @@ -392,12 +406,14 @@ }; &main_i2c1 { + bootph-all; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; exp1: gpio@70 { + bootph-all; compatible = "nxp,pca9538"; reg = <0x70>; gpio-controller; @@ -417,12 +433,17 @@ }; }; -/* mcu_gpio0 is reserved for mcu firmware usage */ +/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ &mcu_gpio0 { status = "reserved"; }; +&mcu_gpio_intr { + status = "reserved"; +}; + &sdhci0 { + status = "okay"; vmmc-supply = <&wlan_en>; bus-width = <4>; non-removable; @@ -442,8 +463,10 @@ }; }; +/* SD/MMC */ &sdhci1 { - /* SD/MMC */ + bootph-all; + status = "okay"; vmmc-supply = <&vdd_mmc1>; pinctrl-names = "default"; bus-width = <4>; @@ -453,11 +476,22 @@ }; &serdes_ln_ctrl { + bootph-all; idle-states = <AM64_SERDES0_LANE0_USB>; }; +&serdes_refclk { + bootph-all; +}; + +&serdes_wiz0 { + bootph-all; +}; + &serdes0 { + bootph-all; serdes0_usb_link: phy@0 { + bootph-all; reg = <0>; cdns,num-lanes = <1>; #phy-cells = <0>; @@ -467,10 +501,12 @@ }; &usbss0 { + bootph-all; ti,vbus-divider; }; &usb0 { + bootph-all; dr_mode = "host"; maximum-speed = "super-speed"; pinctrl-names = "default"; @@ -512,11 +548,8 @@ }; }; -&tscadc0 { - status = "disabled"; -}; - &ospi0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ospi0_pins_default>; |