diff options
Diffstat (limited to 'sys/contrib/openzfs/module')
| -rw-r--r-- | sys/contrib/openzfs/module/icp/algs/sha2/sha2_generic.c | 41 | ||||
| -rw-r--r-- | sys/contrib/openzfs/module/os/freebsd/zfs/zio_crypt.c | 2 | ||||
| -rw-r--r-- | sys/contrib/openzfs/module/os/linux/spl/spl-zone.c | 19 | ||||
| -rw-r--r-- | sys/contrib/openzfs/module/os/linux/zfs/abd_os.c | 9 | ||||
| -rw-r--r-- | sys/contrib/openzfs/module/os/linux/zfs/zfs_acl.c | 2 | ||||
| -rw-r--r-- | sys/contrib/openzfs/module/os/linux/zfs/zfs_vnops_os.c | 5 | ||||
| -rw-r--r-- | sys/contrib/openzfs/module/os/linux/zfs/zpl_file.c | 74 | ||||
| -rw-r--r-- | sys/contrib/openzfs/module/os/linux/zfs/zpl_super.c | 4 | ||||
| -rw-r--r-- | sys/contrib/openzfs/module/os/linux/zfs/zvol_os.c | 32 | ||||
| -rw-r--r-- | sys/contrib/openzfs/module/zfs/vdev_removal.c | 80 | ||||
| -rw-r--r-- | sys/contrib/openzfs/module/zfs/zvol.c | 2 |
11 files changed, 214 insertions, 56 deletions
diff --git a/sys/contrib/openzfs/module/icp/algs/sha2/sha2_generic.c b/sys/contrib/openzfs/module/icp/algs/sha2/sha2_generic.c index d0fcca798fa9..ad707341eec7 100644 --- a/sys/contrib/openzfs/module/icp/algs/sha2/sha2_generic.c +++ b/sys/contrib/openzfs/module/icp/algs/sha2/sha2_generic.c @@ -77,7 +77,8 @@ static const uint32_t SHA256_K[64] = { h = g, g = f, f = e, e = d + T1; \ d = c, c = b, b = a, a = T1 + T2; -static void sha256_generic(uint32_t state[8], const void *data, size_t num_blks) +static void +icp_sha256_generic(uint32_t state[8], const void *data, size_t num_blks) { uint64_t blk; @@ -173,7 +174,8 @@ static const uint64_t SHA512_K[80] = { 0x5fcb6fab3ad6faec, 0x6c44198c4a475817 }; -static void sha512_generic(uint64_t state[8], const void *data, size_t num_blks) +static void +icp_sha512_generic(uint64_t state[8], const void *data, size_t num_blks) { uint64_t blk; @@ -226,7 +228,8 @@ static void sha512_generic(uint64_t state[8], const void *data, size_t num_blks) } } -static void sha256_update(sha256_ctx *ctx, const uint8_t *data, size_t len) +static void +icp_sha256_update(sha256_ctx *ctx, const uint8_t *data, size_t len) { uint64_t pos = ctx->count[0]; uint64_t total = ctx->count[1]; @@ -258,7 +261,8 @@ static void sha256_update(sha256_ctx *ctx, const uint8_t *data, size_t len) ctx->count[1] = total; } -static void sha512_update(sha512_ctx *ctx, const uint8_t *data, size_t len) +static void +icp_sha512_update(sha512_ctx *ctx, const uint8_t *data, size_t len) { uint64_t pos = ctx->count[0]; uint64_t total = ctx->count[1]; @@ -290,7 +294,8 @@ static void sha512_update(sha512_ctx *ctx, const uint8_t *data, size_t len) ctx->count[1] = total; } -static void sha256_final(sha256_ctx *ctx, uint8_t *result, int bits) +static void +icp_sha256_final(sha256_ctx *ctx, uint8_t *result, int bits) { uint64_t mlen, pos = ctx->count[0]; uint8_t *m = ctx->wbuf; @@ -334,7 +339,8 @@ static void sha256_final(sha256_ctx *ctx, uint8_t *result, int bits) memset(ctx, 0, sizeof (*ctx)); } -static void sha512_final(sha512_ctx *ctx, uint8_t *result, int bits) +static void +icp_sha512_final(sha512_ctx *ctx, uint8_t *result, int bits) { uint64_t mlen, pos = ctx->count[0]; uint8_t *m = ctx->wbuf, *r; @@ -461,14 +467,14 @@ SHA2Update(SHA2_CTX *ctx, const void *data, size_t len) switch (ctx->algotype) { case SHA256: - sha256_update(&ctx->sha256, data, len); + icp_sha256_update(&ctx->sha256, data, len); break; case SHA512: case SHA512_HMAC_MECH_INFO_TYPE: - sha512_update(&ctx->sha512, data, len); + icp_sha512_update(&ctx->sha512, data, len); break; case SHA512_256: - sha512_update(&ctx->sha512, data, len); + icp_sha512_update(&ctx->sha512, data, len); break; } } @@ -479,32 +485,33 @@ SHA2Final(void *digest, SHA2_CTX *ctx) { switch (ctx->algotype) { case SHA256: - sha256_final(&ctx->sha256, digest, 256); + icp_sha256_final(&ctx->sha256, digest, 256); break; case SHA512: case SHA512_HMAC_MECH_INFO_TYPE: - sha512_final(&ctx->sha512, digest, 512); + icp_sha512_final(&ctx->sha512, digest, 512); break; case SHA512_256: - sha512_final(&ctx->sha512, digest, 256); + icp_sha512_final(&ctx->sha512, digest, 256); break; } } /* the generic implementation is always okay */ -static boolean_t sha2_is_supported(void) +static boolean_t +icp_sha2_is_supported(void) { return (B_TRUE); } const sha256_ops_t sha256_generic_impl = { .name = "generic", - .transform = sha256_generic, - .is_supported = sha2_is_supported + .transform = icp_sha256_generic, + .is_supported = icp_sha2_is_supported }; const sha512_ops_t sha512_generic_impl = { .name = "generic", - .transform = sha512_generic, - .is_supported = sha2_is_supported + .transform = icp_sha512_generic, + .is_supported = icp_sha2_is_supported }; diff --git a/sys/contrib/openzfs/module/os/freebsd/zfs/zio_crypt.c b/sys/contrib/openzfs/module/os/freebsd/zfs/zio_crypt.c index 91cf38016e00..8562c42b3220 100644 --- a/sys/contrib/openzfs/module/os/freebsd/zfs/zio_crypt.c +++ b/sys/contrib/openzfs/module/os/freebsd/zfs/zio_crypt.c @@ -437,6 +437,7 @@ zio_crypt_key_wrap(crypto_key_t *cwkey, zio_crypt_key_t *key, uint8_t *iv, ASSERT3U(crypt, <, ZIO_CRYPT_FUNCTIONS); + memset(&cuio_s, 0, sizeof (cuio_s)); zfs_uio_init(&cuio, &cuio_s); keydata_len = zio_crypt_table[crypt].ci_keylen; @@ -519,6 +520,7 @@ zio_crypt_key_unwrap(crypto_key_t *cwkey, uint64_t crypt, uint64_t version, keydata_len = zio_crypt_table[crypt].ci_keylen; rw_init(&key->zk_salt_lock, NULL, RW_DEFAULT, NULL); + memset(&cuio_s, 0, sizeof (cuio_s)); zfs_uio_init(&cuio, &cuio_s); /* diff --git a/sys/contrib/openzfs/module/os/linux/spl/spl-zone.c b/sys/contrib/openzfs/module/os/linux/spl/spl-zone.c index 45c2999a4bb1..b2eae5d00b10 100644 --- a/sys/contrib/openzfs/module/os/linux/spl/spl-zone.c +++ b/sys/contrib/openzfs/module/os/linux/spl/spl-zone.c @@ -25,6 +25,10 @@ * SUCH DAMAGE. */ +/* + * Copyright (c) 2025, Rob Norris <robn@despairlabs.com> + */ + #include <sys/types.h> #include <sys/sysmacros.h> #include <sys/kmem.h> @@ -56,6 +60,19 @@ typedef struct zone_dataset { } zone_dataset_t; #ifdef CONFIG_USER_NS + +/* + * Linux 6.18 moved the generic namespace type away from ns->ops->type onto + * ns_common itself. + */ +#ifdef HAVE_NS_COMMON_TYPE +#define ns_is_newuser(ns) \ + ((ns)->ns_type == CLONE_NEWUSER) +#else +#define ns_is_newuser(ns) \ + ((ns)->ops != NULL && (ns)->ops->type == CLONE_NEWUSER) +#endif + /* * Returns: * - 0 on success @@ -84,7 +101,7 @@ user_ns_get(int fd, struct user_namespace **userns) goto done; } ns = get_proc_ns(file_inode(nsfile)); - if (ns->ops->type != CLONE_NEWUSER) { + if (!ns_is_newuser(ns)) { error = ENOTTY; goto done; } diff --git a/sys/contrib/openzfs/module/os/linux/zfs/abd_os.c b/sys/contrib/openzfs/module/os/linux/zfs/abd_os.c index 8a8316f63c48..18f2426fbbfc 100644 --- a/sys/contrib/openzfs/module/os/linux/zfs/abd_os.c +++ b/sys/contrib/openzfs/module/os/linux/zfs/abd_os.c @@ -23,6 +23,7 @@ * Copyright (c) 2014 by Chunwei Chen. All rights reserved. * Copyright (c) 2019 by Delphix. All rights reserved. * Copyright (c) 2023, 2024, Klara Inc. + * Copyright (c) 2025, Rob Norris <robn@despairlabs.com> */ /* @@ -1109,6 +1110,14 @@ abd_return_buf_copy(abd_t *abd, void *buf, size_t n) #define ABD_ITER_PAGE_SIZE(page) (PAGESIZE) #endif +#ifndef nth_page +/* + * Since 6.18 nth_page() no longer exists, and is no longer required to iterate + * within a single SG entry, so we replace it with a simple addition. + */ +#define nth_page(p, n) ((p)+(n)) +#endif + void abd_iter_page(struct abd_iter *aiter) { diff --git a/sys/contrib/openzfs/module/os/linux/zfs/zfs_acl.c b/sys/contrib/openzfs/module/os/linux/zfs/zfs_acl.c index daa4b5776837..934d74a112fd 100644 --- a/sys/contrib/openzfs/module/os/linux/zfs/zfs_acl.c +++ b/sys/contrib/openzfs/module/os/linux/zfs/zfs_acl.c @@ -2524,7 +2524,7 @@ zfs_zaccess_common(znode_t *zp, uint32_t v4_mode, uint32_t *working_mode, * Also note: DOS R/O is ignored for directories. */ if ((v4_mode & WRITE_MASK_DATA) && - S_ISDIR(ZTOI(zp)->i_mode) && + !S_ISDIR(ZTOI(zp)->i_mode) && (zp->z_pflags & ZFS_READONLY)) { return (SET_ERROR(EPERM)); } diff --git a/sys/contrib/openzfs/module/os/linux/zfs/zfs_vnops_os.c b/sys/contrib/openzfs/module/os/linux/zfs/zfs_vnops_os.c index 6106726651a3..e845ad69ad78 100644 --- a/sys/contrib/openzfs/module/os/linux/zfs/zfs_vnops_os.c +++ b/sys/contrib/openzfs/module/os/linux/zfs/zfs_vnops_os.c @@ -2033,10 +2033,7 @@ zfs_setattr(znode_t *zp, vattr_t *vap, int flags, cred_t *cr, zidmap_t *mnt_ns) goto out3; } - if ((mask & ATTR_SIZE) && (zp->z_pflags & ZFS_READONLY)) { - err = SET_ERROR(EPERM); - goto out3; - } + /* ZFS_READONLY will be handled in zfs_zaccess() */ /* * Verify timestamps doesn't overflow 32 bits. diff --git a/sys/contrib/openzfs/module/os/linux/zfs/zpl_file.c b/sys/contrib/openzfs/module/os/linux/zfs/zpl_file.c index d07317b0d910..02965ac8cbee 100644 --- a/sys/contrib/openzfs/module/os/linux/zfs/zpl_file.c +++ b/sys/contrib/openzfs/module/os/linux/zfs/zpl_file.c @@ -23,6 +23,7 @@ * Copyright (c) 2011, Lawrence Livermore National Security, LLC. * Copyright (c) 2015 by Chunwei Chen. All rights reserved. * Copyright (c) 2025, Klara, Inc. + * Copyright (c) 2025, Rob Norris <robn@despairlabs.com> */ @@ -478,6 +479,7 @@ zpl_putpage(struct page *pp, struct writeback_control *wbc, void *data) return (ret); } +#ifdef HAVE_WRITE_CACHE_PAGES #ifdef HAVE_WRITEPAGE_T_FOLIO static int zpl_putfolio(struct folio *pp, struct writeback_control *wbc, void *data) @@ -499,6 +501,78 @@ zpl_write_cache_pages(struct address_space *mapping, #endif return (result); } +#else +static inline int +zpl_write_cache_pages(struct address_space *mapping, + struct writeback_control *wbc, void *data) +{ + pgoff_t start = wbc->range_start >> PAGE_SHIFT; + pgoff_t end = wbc->range_end >> PAGE_SHIFT; + + struct folio_batch fbatch; + folio_batch_init(&fbatch); + + /* + * This atomically (-ish) tags all DIRTY pages in the range with + * TOWRITE, allowing users to continue dirtying or undirtying pages + * while we get on with writeback, without us treading on each other. + */ + tag_pages_for_writeback(mapping, start, end); + + int err = 0; + unsigned int npages; + + /* + * Grab references to the TOWRITE pages just flagged. This may not get + * all of them, so we do it in a loop until there are none left. + */ + while ((npages = filemap_get_folios_tag(mapping, &start, end, + PAGECACHE_TAG_TOWRITE, &fbatch)) != 0) { + + /* Loop over each page and write it out. */ + struct folio *folio; + while ((folio = folio_batch_next(&fbatch)) != NULL) { + folio_lock(folio); + + /* + * If the folio has been remapped, or is no longer + * dirty, then there's nothing to do. + */ + if (folio->mapping != mapping || + !folio_test_dirty(folio)) { + folio_unlock(folio); + continue; + } + + /* + * If writeback is already in progress, wait for it to + * finish. We continue after this even if the page + * ends up clean; zfs_putpage() will skip it if no + * further work is required. + */ + while (folio_test_writeback(folio)) + folio_wait_bit(folio, PG_writeback); + + /* + * Write it out and collect any error. zfs_putpage() + * will clear the TOWRITE and DIRTY flags, and return + * with the page unlocked. + */ + int ferr = zpl_putpage(&folio->page, wbc, data); + if (err == 0 && ferr != 0) + err = ferr; + + /* Housekeeping for the caller. */ + wbc->nr_to_write -= folio_nr_pages(folio); + } + + /* Release any remaining references on the batch. */ + folio_batch_release(&fbatch); + } + + return (err); +} +#endif static int zpl_writepages(struct address_space *mapping, struct writeback_control *wbc) diff --git a/sys/contrib/openzfs/module/os/linux/zfs/zpl_super.c b/sys/contrib/openzfs/module/os/linux/zfs/zpl_super.c index 444948d03cb3..347b352506e5 100644 --- a/sys/contrib/openzfs/module/os/linux/zfs/zpl_super.c +++ b/sys/contrib/openzfs/module/os/linux/zfs/zpl_super.c @@ -23,6 +23,7 @@ * Copyright (c) 2011, Lawrence Livermore National Security, LLC. * Copyright (c) 2023, Datto Inc. All rights reserved. * Copyright (c) 2025, Klara, Inc. + * Copyright (c) 2025, Rob Norris <robn@despairlabs.com> */ @@ -33,6 +34,7 @@ #include <sys/zpl.h> #include <linux/iversion.h> #include <linux/version.h> +#include <linux/vfs_compat.h> /* * What to do when the last reference to an inode is released. If 0, the kernel @@ -104,7 +106,7 @@ zpl_dirty_inode(struct inode *ip, int flags) * reporting memory pressure and requests OpenZFS release some memory (see * zfs_prune()). * - * When set to 1, we call generic_delete_node(), which always returns "destroy + * When set to 1, we call generic_delete_inode(), which always returns "destroy * immediately", resulting in inodes being destroyed immediately, releasing * their associated dnodes and dbufs to the dbuf cached and the ARC to be * evicted as normal. diff --git a/sys/contrib/openzfs/module/os/linux/zfs/zvol_os.c b/sys/contrib/openzfs/module/os/linux/zfs/zvol_os.c index 4e66bee7744d..fe939150b641 100644 --- a/sys/contrib/openzfs/module/os/linux/zfs/zvol_os.c +++ b/sys/contrib/openzfs/module/os/linux/zfs/zvol_os.c @@ -21,7 +21,7 @@ */ /* * Copyright (c) 2012, 2020 by Delphix. All rights reserved. - * Copyright (c) 2024, Rob Norris <robn@despairlabs.com> + * Copyright (c) 2024, 2025, Rob Norris <robn@despairlabs.com> * Copyright (c) 2024, 2025, Klara, Inc. */ @@ -1032,12 +1032,12 @@ zvol_os_update_volsize(zvol_state_t *zv, uint64_t volsize) * tiny devices. For devices over 1 Mib a standard head and sector count * is used to keep the cylinders count reasonable. */ -static int -zvol_getgeo(struct block_device *bdev, struct hd_geometry *geo) +static inline int +zvol_getgeo_impl(struct gendisk *disk, struct hd_geometry *geo) { + zvol_state_t *zv = atomic_load_ptr(&disk->private_data); sector_t sectors; - zvol_state_t *zv = atomic_load_ptr(&bdev->bd_disk->private_data); ASSERT3P(zv, !=, NULL); ASSERT3U(zv->zv_open_count, >, 0); @@ -1057,6 +1057,20 @@ zvol_getgeo(struct block_device *bdev, struct hd_geometry *geo) return (0); } +#ifdef HAVE_BLOCK_DEVICE_OPERATIONS_GETGEO_GENDISK +static int +zvol_getgeo(struct gendisk *disk, struct hd_geometry *geo) +{ + return (zvol_getgeo_impl(disk, geo)); +} +#else +static int +zvol_getgeo(struct block_device *bdev, struct hd_geometry *geo) +{ + return (zvol_getgeo_impl(bdev->bd_disk, geo)); +} +#endif + /* * Why have two separate block_device_operations structs? * @@ -1500,7 +1514,7 @@ zvol_os_remove_minor(zvol_state_t *zv) if (zso->use_blk_mq) blk_mq_free_tag_set(&zso->tag_set); - ida_simple_remove(&zvol_ida, MINOR(zso->zvo_dev) >> ZVOL_MINOR_BITS); + ida_free(&zvol_ida, MINOR(zso->zvo_dev) >> ZVOL_MINOR_BITS); kmem_free(zso, sizeof (struct zvol_state_os)); @@ -1655,7 +1669,7 @@ zvol_os_create_minor(const char *name) if (zvol_inhibit_dev) return (0); - idx = ida_simple_get(&zvol_ida, 0, 0, kmem_flags_convert(KM_SLEEP)); + idx = ida_alloc(&zvol_ida, kmem_flags_convert(KM_SLEEP)); if (idx < 0) return (SET_ERROR(-idx)); minor = idx << ZVOL_MINOR_BITS; @@ -1663,7 +1677,7 @@ zvol_os_create_minor(const char *name) /* too many partitions can cause an overflow */ zfs_dbgmsg("zvol: create minor overflow: %s, minor %u/%u", name, minor, MINOR(minor)); - ida_simple_remove(&zvol_ida, idx); + ida_free(&zvol_ida, idx); return (SET_ERROR(EINVAL)); } @@ -1671,7 +1685,7 @@ zvol_os_create_minor(const char *name) if (zv) { ASSERT(MUTEX_HELD(&zv->zv_state_lock)); mutex_exit(&zv->zv_state_lock); - ida_simple_remove(&zvol_ida, idx); + ida_free(&zvol_ida, idx); return (SET_ERROR(EEXIST)); } @@ -1771,7 +1785,7 @@ out_doi: rw_exit(&zvol_state_lock); error = zvol_os_add_disk(zv->zv_zso->zvo_disk); } else { - ida_simple_remove(&zvol_ida, idx); + ida_free(&zvol_ida, idx); } return (error); diff --git a/sys/contrib/openzfs/module/zfs/vdev_removal.c b/sys/contrib/openzfs/module/zfs/vdev_removal.c index 2f7a739da241..abb71543e3ab 100644 --- a/sys/contrib/openzfs/module/zfs/vdev_removal.c +++ b/sys/contrib/openzfs/module/zfs/vdev_removal.c @@ -51,34 +51,70 @@ #include <sys/trace_zfs.h> /* - * This file contains the necessary logic to remove vdevs from a - * storage pool. Currently, the only devices that can be removed - * are log, cache, and spare devices; and top level vdevs from a pool - * w/o raidz or mirrors. (Note that members of a mirror can be removed - * by the detach operation.) + * This file contains the necessary logic to remove vdevs from a storage + * pool. Note that members of a mirror can be removed by the detach + * operation. Currently, the only devices that can be removed are: * - * Log vdevs are removed by evacuating them and then turning the vdev - * into a hole vdev while holding spa config locks. + * 1) Traditional hot spare and cache vdevs. Note that draid distributed + * spares are fixed at creation time and cannot be removed. * - * Top level vdevs are removed and converted into an indirect vdev via - * a multi-step process: + * 2) Log vdevs are removed by evacuating them and then turning the vdev + * into a hole vdev while holding spa config locks. * - * - Disable allocations from this device (spa_vdev_remove_top). + * 3) Top-level singleton and mirror vdevs, including dedup and special + * vdevs, are removed and converted into an indirect vdev via a + * multi-step process: * - * - From a new thread (spa_vdev_remove_thread), copy data from - * the removing vdev to a different vdev. The copy happens in open - * context (spa_vdev_copy_impl) and issues a sync task - * (vdev_mapping_sync) so the sync thread can update the partial - * indirect mappings in core and on disk. + * - Disable allocations from this device (spa_vdev_remove_top). * - * - If a free happens during a removal, it is freed from the - * removing vdev, and if it has already been copied, from the new - * location as well (free_from_removing_vdev). + * - From a new thread (spa_vdev_remove_thread), copy data from the + * removing vdev to a different vdev. The copy happens in open context + * (spa_vdev_copy_impl) and issues a sync task (vdev_mapping_sync) so + * the sync thread can update the partial indirect mappings in core + * and on disk. * - * - After the removal is completed, the copy thread converts the vdev - * into an indirect vdev (vdev_remove_complete) before instructing - * the sync thread to destroy the space maps and finish the removal - * (spa_finish_removal). + * - If a free happens during a removal, it is freed from the removing + * vdev, and if it has already been copied, from the new location as + * well (free_from_removing_vdev). + * + * - After the removal is completed, the copy thread converts the vdev + * into an indirect vdev (vdev_remove_complete) before instructing + * the sync thread to destroy the space maps and finish the removal + * (spa_finish_removal). + * + * The following constraints currently apply primary device removal: + * + * - All vdevs must be online, healthy, and not be missing any data + * according to the DTLs. + * + * - When removing a singleton or mirror vdev, regardless of it's a + * special, dedup, or primary device, it must have the same ashift + * as the devices in the normal allocation class. Furthermore, all + * vdevs in the normal allocation class must have the same ashift to + * ensure the new allocations never includes additional padding. + * + * - The normal allocation class cannot contain any raidz or draid + * top-level vdevs since segments are copied without regard for block + * boundaries. This makes it impossible to calculate the required + * parity columns when using these vdev types as the destination. + * + * - The encryption keys must be loaded so the ZIL logs can be reset + * in order to prevent writing to the device being removed. + * + * N.B. ashift and raidz/draid constraints for primary top-level device + * removal could be slightly relaxed if it were possible to request that + * DVAs from a mirror or singleton in the specified allocation class be + * used (metaslab_alloc_dva). + * + * This flexibility would be particularly useful for raidz/draid pools which + * often include a mirrored special device. If a mistakenly added top-level + * singleton were added it could then still be removed at the cost of some + * special device capacity. This may be a worthwhile tradeoff depending on + * the pool capacity and expense (cost, complexity, time) of creating a new + * pool and copying all of the data to correct the configuration. + * + * Furthermore, while not currently supported it should be possible to allow + * vdevs of any type to be removed as long as they've never been written to. */ typedef struct vdev_copy_arg { diff --git a/sys/contrib/openzfs/module/zfs/zvol.c b/sys/contrib/openzfs/module/zfs/zvol.c index faced0db7e9e..00f98168d3d8 100644 --- a/sys/contrib/openzfs/module/zfs/zvol.c +++ b/sys/contrib/openzfs/module/zfs/zvol.c @@ -410,7 +410,7 @@ zvol_set_volthreading(const char *name, boolean_t value) { zvol_state_t *zv = zvol_find_by_name(name, RW_NONE); if (zv == NULL) - return (SET_ERROR(ENOENT)); + return (-1); zv->zv_threading = value; mutex_exit(&zv->zv_state_lock); return (0); |