diff options
Diffstat (limited to 'sys/dev/etherswitch/rtl8366/rtl8366rbvar.h')
| -rw-r--r-- | sys/dev/etherswitch/rtl8366/rtl8366rbvar.h | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/sys/dev/etherswitch/rtl8366/rtl8366rbvar.h b/sys/dev/etherswitch/rtl8366/rtl8366rbvar.h new file mode 100644 index 000000000000..2ce532d998ac --- /dev/null +++ b/sys/dev/etherswitch/rtl8366/rtl8366rbvar.h @@ -0,0 +1,183 @@ +/*- + * SPDX-License-Identifier: BSD-2-Clause + * + * Copyright (c) 2015-2016 Hiroki Mori. + * Copyright (c) 2011-2012 Stefan Bethke. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef _DEV_ETHERSWITCH_RTL8366RBVAR_H_ +#define _DEV_ETHERSWITCH_RTL8366RBVAR_H_ + +#define RTL8366RB 0 +#define RTL8366SR 1 + +#define RTL8366_IIC_ADDR 0xa8 +#define RTL_IICBUS_TIMEOUT 100 /* us */ +#define RTL_IICBUS_READ 1 +#define RTL_IICBUS_WRITE 0 +/* number of times to try and select the chip on the I2C bus */ +#define RTL_IICBUS_RETRIES 3 +#define RTL_IICBUS_RETRY_SLEEP (hz/1000) + +/* Register definitions */ + +/* Switch Global Configuration */ +#define RTL8366_SGCR 0x0000 +#define RTL8366_SGCR_EN_BC_STORM_CTRL 0x0001 +#define RTL8366_SGCR_MAX_LENGTH_MASK 0x0030 +#define RTL8366_SGCR_MAX_LENGTH_1522 0x0000 +#define RTL8366_SGCR_MAX_LENGTH_1536 0x0010 +#define RTL8366_SGCR_MAX_LENGTH_1552 0x0020 +#define RTL8366_SGCR_MAX_LENGTH_9216 0x0030 +#define RTL8366_SGCR_EN_VLAN 0x2000 +#define RTL8366_SGCR_EN_VLAN_4KTB 0x4000 +#define RTL8366_SGCR_EN_QOS 0x8000 + +/* Port Enable Control: DISABLE_PORT[5:0] */ +#define RTL8366_PECR 0x0001 + +/* Switch Security Control 0: DIS_LEARN[5:0] */ +#define RTL8366_SSCR0 0x0002 + +/* Switch Security Control 1: DIS_AGE[5:0] */ +#define RTL8366_SSCR1 0x0003 + +/* Switch Security Control 2 */ +#define RTL8366_SSCR2 0x0004 +#define RTL8366_SSCR2_DROP_UNKNOWN_DA 0x0001 + +/* Port Link Status: two ports per register */ +#define RTL8366_PLSR_BASE (sc->chip_type == 0 ? 0x0014 : 0x0060) +#define RTL8366_PLSR_SPEED_MASK 0x03 +#define RTL8366_PLSR_SPEED_10 0x00 +#define RTL8366_PLSR_SPEED_100 0x01 +#define RTL8366_PLSR_SPEED_1000 0x02 +#define RTL8366_PLSR_FULLDUPLEX 0x04 +#define RTL8366_PLSR_LINK 0x10 +#define RTL8366_PLSR_TXPAUSE 0x20 +#define RTL8366_PLSR_RXPAUSE 0x40 +#define RTL8366_PLSR_NO_AUTO 0x80 + +/* VLAN Member Configuration, 3 or 2 registers per VLAN */ +#define RTL8366_VMCR_BASE (sc->chip_type == 0 ? 0x0020 : 0x0016) +#define RTL8366_VMCR_MULT (sc->chip_type == 0 ? 3 : 2) +#define RTL8366_VMCR_DOT1Q_REG 0 +#define RTL8366_VMCR_DOT1Q_VID_SHIFT 0 +#define RTL8366_VMCR_DOT1Q_VID_MASK 0x0fff +#define RTL8366_VMCR_DOT1Q_PCP_SHIFT 12 +#define RTL8366_VMCR_DOT1Q_PCP_MASK 0x7000 +#define RTL8366_VMCR_MU_REG 1 +#define RTL8366_VMCR_MU_MEMBER_SHIFT 0 +#define RTL8366_VMCR_MU_MEMBER_MASK (sc->chip_type == 0 ? 0x00ff : 0x003f) +#define RTL8366_VMCR_MU_UNTAG_SHIFT (sc->chip_type == 0 ? 8 : 6) +#define RTL8366_VMCR_MU_UNTAG_MASK (sc->chip_type == 0 ? 0xff00 : 0x0fc0) +#define RTL8366_VMCR_FID_REG (sc->chip_type == 0 ? 2 : 1) +#define RTL8366_VMCR_FID_FID_SHIFT (sc->chip_type == 0 ? 0 : 12) +#define RTL8366_VMCR_FID_FID_MASK (sc->chip_type == 0 ? 0x0007 : 0x7000) +#define RTL8366_VMCR(_reg, _vlan) \ + (RTL8366_VMCR_BASE + _reg + _vlan * RTL8366_VMCR_MULT) +/* VLAN Identifier */ +#define RTL8366_VMCR_VID(_r) \ + (_r[RTL8366_VMCR_DOT1Q_REG] & RTL8366_VMCR_DOT1Q_VID_MASK) +/* Priority Code Point */ +#define RTL8366_VMCR_PCP(_r) \ + ((_r[RTL8366_VMCR_DOT1Q_REG] & RTL8366_VMCR_DOT1Q_PCP_MASK) \ + >> RTL8366_VMCR_DOT1Q_PCP_SHIFT) +/* Member ports */ +#define RTL8366_VMCR_MEMBER(_r) \ + (_r[RTL8366_VMCR_MU_REG] & RTL8366_VMCR_MU_MEMBER_MASK) +/* Untagged ports */ +#define RTL8366_VMCR_UNTAG(_r) \ + ((_r[RTL8366_VMCR_MU_REG] & RTL8366_VMCR_MU_UNTAG_MASK) \ + >> RTL8366_VMCR_MU_UNTAG_SHIFT) +/* Forwarding ID */ +#define RTL8366_VMCR_FID(_r) \ + (sc->chip_type == 0 ? (_r[RTL8366_VMCR_FID_REG] & RTL8366_VMCR_FID_FID_MASK) : \ + ((_r[RTL8366_VMCR_FID_REG] & RTL8366_VMCR_FID_FID_MASK) \ + >> RTL8366_VMCR_FID_FID_SHIFT)) + +/* + * Port VLAN Control, 4 ports per register + * Determines the VID for untagged ingress frames through + * index into VMC. + */ +#define RTL8366_PVCR_BASE (sc->chip_type == 0 ? 0x0063 : 0x0058) +#define RTL8366_PVCR_PORT_SHIFT 4 +#define RTL8366_PVCR_PORT_PERREG (16 / RTL8366_PVCR_PORT_SHIFT) +#define RTL8366_PVCR_PORT_MASK 0x000f +#define RTL8366_PVCR_REG(_port) \ + (RTL8366_PVCR_BASE + _port / (RTL8366_PVCR_PORT_PERREG)) +#define RTL8366_PVCR_VAL(_port, _pvlan) \ + ((_pvlan & RTL8366_PVCR_PORT_MASK) << \ + ((_port % RTL8366_PVCR_PORT_PERREG) * RTL8366_PVCR_PORT_SHIFT)) +#define RTL8366_PVCR_GET(_port, _val) \ + (((_val) >> ((_port % RTL8366_PVCR_PORT_PERREG) * RTL8366_PVCR_PORT_SHIFT)) & RTL8366_PVCR_PORT_MASK) + +/* Reset Control */ +#define RTL8366_RCR 0x0100 +#define RTL8366_RCR_HARD_RESET 0x0001 +#define RTL8366_RCR_SOFT_RESET 0x0002 + +/* Chip Version Control: CHIP_VER[3:0] */ +#define RTL8366_CVCR (sc->chip_type == 0 ? 0x050A : 0x0104) +/* Chip Identifier */ +#define RTL8366RB_CIR 0x0509 +#define RTL8366RB_CIR_ID8366RB 0x5937 +#define RTL8366SR_CIR 0x0105 +#define RTL8366SR_CIR_ID8366SR 0x8366 + +/* VLAN Ingress Control 2: [5:0] */ +#define RTL8366_VIC2R 0x037f + +/* MIB registers */ +#define RTL8366_MCNT_BASE 0x1000 +#define RTL8366_MCTLR (sc->chip_type == 0 ? 0x13f0 : 0x11F0) +#define RTL8366_MCTLR_BUSY 0x0001 +#define RTL8366_MCTLR_RESET 0x0002 +#define RTL8366_MCTLR_RESET_PORT_MASK 0x00fc +#define RTL8366_MCTLR_RESET_ALL 0x0800 + +#define RTL8366_MCNT(_port, _r) \ + (RTL8366_MCNT_BASE + 0x50 * (_port) + (_r)) +#define RTL8366_MCTLR_RESET_PORT(_p) \ + (1 << ((_p) + 2)) + +/* PHY Access Control */ +#define RTL8366_PACR (sc->chip_type == 0 ? 0x8000 : 0x8028) +#define RTL8366_PACR_WRITE 0x0000 +#define RTL8366_PACR_READ 0x0001 + +/* PHY Access Data */ +#define RTL8366_PADR (sc->chip_type == 0 ? 0x8002 : 0x8029) + +#define RTL8366_PHYREG(phy, page, reg) \ + (0x8000 | (1 << (((phy) & 0x1f) + 9)) | (((page) & (sc->chip_type == 0 ? 0xf : 0x7)) << 5) | ((reg) & 0x1f)) + +/* general characteristics of the chip */ +#define RTL8366_NUM_PHYS 5 +#define RTL8366_NUM_VLANS 16 +#define RTL8366_NUM_PHY_REG 32 + +#endif |