diff options
Diffstat (limited to 'sys/dts/arm/bcm2835.dtsi')
| -rw-r--r-- | sys/dts/arm/bcm2835.dtsi | 505 |
1 files changed, 0 insertions, 505 deletions
diff --git a/sys/dts/arm/bcm2835.dtsi b/sys/dts/arm/bcm2835.dtsi deleted file mode 100644 index 52b6315d6125..000000000000 --- a/sys/dts/arm/bcm2835.dtsi +++ /dev/null @@ -1,505 +0,0 @@ -/* - * Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@bluezbox.com> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD$ - */ - -/ { - #address-cells = <1>; - #size-cells = <1>; - - cpus { - cpu@0 { - compatible = "arm,1176jzf-s"; - }; - }; - - - SOC: axi { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x20000000 0x01000000>; - ranges = <0 0x20000000 0x01000000>; - - intc: interrupt-controller { - compatible = "broadcom,bcm2835-armctrl-ic", - "broadcom,bcm2708-armctrl-ic"; - reg = <0xB200 0x200>; - - interrupt-controller; - #interrupt-cells = <1>; - - /* Bank 0 - * 0: ARM_TIMER - * 1: ARM_MAILBOX - * 2: ARM_DOORBELL_0 - * 3: ARM_DOORBELL_1 - * 4: VPU0_HALTED - * 5: VPU1_HALTED - * 6: ILLEGAL_TYPE0 - * 7: ILLEGAL_TYPE1 - */ - - /* Bank 1 - * 0: TIMER0 16: DMA0 - * 1: TIMER1 17: DMA1 - * 2: TIMER2 18: VC_DMA2 - * 3: TIMER3 19: VC_DMA3 - * 4: CODEC0 20: DMA4 - * 5: CODEC1 21: DMA5 - * 6: CODEC2 22: DMA6 - * 7: VC_JPEG 23: DMA7 - * 8: ISP 24: DMA8 - * 9: VC_USB 25: DMA9 - * 10: VC_3D 26: DMA10 - * 11: TRANSPOSER 27: DMA11 - * 12: MULTICORESYNC0 28: DMA12 - * 13: MULTICORESYNC1 29: AUX - * 14: MULTICORESYNC2 30: ARM - * 15: MULTICORESYNC3 31: VPUDMA - */ - - /* Bank 2 - * 0: HOSTPORT 16: SMI - * 1: VIDEOSCALER 17: GPIO0 - * 2: CCP2TX 18: GPIO1 - * 3: SDC 19: GPIO2 - * 4: DSI0 20: GPIO3 - * 5: AVE 21: VC_I2C - * 6: CAM0 22: VC_SPI - * 7: CAM1 23: VC_I2SPCM - * 8: HDMI0 24: VC_SDIO - * 9: HDMI1 25: VC_UART - * 10: PIXELVALVE1 26: SLIMBUS - * 11: I2CSPISLV 27: VEC - * 12: DSI1 28: CPG - * 13: PWA0 29: RNG - * 14: PWA1 30: VC_ARASANSDIO - * 15: CPR 31: AVSPMON - */ - }; - - timer { - compatible = "broadcom,bcm2835-system-timer", - "broadcom,bcm2708-system-timer"; - reg = <0x3000 0x1000>; - interrupts = <8 9 10 11>; - interrupt-parent = <&intc>; - - clock-frequency = <1000000>; - }; - - armtimer { - /* Not AMBA compatible */ - compatible = "broadcom,bcm2835-sp804", "arm,sp804"; - reg = <0xB400 0x24>; - interrupts = <0>; - interrupt-parent = <&intc>; - }; - - watchdog0 { - compatible = "broadcom,bcm2835-wdt", - "broadcom,bcm2708-wdt"; - reg = <0x10001c 0x0c>; /* 0x1c, 0x20, 0x24 */ - }; - - gpio: gpio { - compatible = "broadcom,bcm2835-gpio", - "broadcom,bcm2708-gpio"; - reg = <0x200000 0xb0>; - - /* Unusual arrangement of interrupts - * (determined by testing) - * 17: Bank 0 (GPIOs 0-31) - * 19: Bank 1 (GPIOs 32-53) - * 18: Bank 2 - * 20: All banks (GPIOs 0-53) - */ - interrupts = <57 59 58 60>; - interrupt-parent = <&intc>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - - pinctrl-names = "default"; - pinctrl-0 = <&pins_reserved>; - - /* Pins that can short 3.3V to GND in output mode: 46-47 - * Pins used by VideoCore: 48-53 - */ - broadcom,read-only = <46>, <47>, <48>, <49>, <50>, - <51>, <52>, <53>; - - /* BSC0 */ - pins_bsc0_a: bsc0_a { - broadcom,pins = <0>, <1>; - }; - - pins_bsc0_b: bsc0_b { - broadcom,pins = <28>, <29>; - }; - - pins_bsc0_c: bsc0_c { - broadcom,pins = <44>, <45>; - }; - - /* BSC1 */ - pins_bsc1_a: bsc1_a { - broadcom,pins = <2>, <3>; - }; - - pins_bsc1_b: bsc1_b { - broadcom,pins = <44>, <45>; - }; - - /* GPCLK0 */ - pins_gpclk0_a: gpclk0_a { - broadcom,pins = <4>; - }; - - pins_gpclk0_b: gpclk0_b { - broadcom,pins = <20>; - }; - - pins_gpclk0_c: gpclk0_c { - broadcom,pins = <32>; - }; - - pins_gpclk0_d: gpclk0_d { - broadcom,pins = <34>; - }; - - /* GPCLK1 */ - pins_gpclk1_a: gpclk1_a { - broadcom,pins = <5>; - }; - - pins_gpclk1_b: gpclk1_b { - broadcom,pins = <21>; - }; - - pins_gpclk1_c: gpclk1_c { - broadcom,pins = <42>; - }; - - pins_gpclk1_d: gpclk1_d { - broadcom,pins = <44>; - }; - - /* GPCLK2 */ - pins_gpclk2_a: gpclk2_a { - broadcom,pins = <6>; - }; - - pins_gpclk2_b: gpclk2_b { - broadcom,pins = <43>; - }; - - /* SPI0 */ - pins_spi0_a: spi0_a { - broadcom,pins = <7>, <8>, <9>, <10>, <11>; - }; - - pins_spi0_b: spi0_b { - broadcom,pins = <35>, <36>, <37>, <38>, <39>; - }; - - /* PWM */ - pins_pwm0_a: pwm0_a { - broadcom,pins = <12>; - }; - - pins_pwm0_b: pwm0_b { - broadcom,pins = <18>; - }; - - pins_pwm0_c: pwm0_c { - broadcom,pins = <40>; - }; - - pins_pwm1_a: pwm1_a { - broadcom,pins = <13>; - }; - - pins_pwm1_b: pwm1_b { - broadcom,pins = <19>; - }; - - pins_pwm1_c: pwm1_c { - broadcom,pins = <41>; - }; - - pins_pwm1_d: pwm1_d { - broadcom,pins = <45>; - }; - - /* UART0 */ - pins_uart0_a: uart0_a { - broadcom,pins = <14>, <15>; - }; - - pins_uart0_b: uart0_b { - broadcom,pins = <32>, <33>; - }; - - pins_uart0_c: uart0_c { - broadcom,pins = <36>, <37>; - }; - - pins_uart0_fc_a: uart0_fc_a { - broadcom,pins = <16>, <17>; - }; - - pins_uart0_fc_b: uart0_fc_b { - broadcom,pins = <30>, <31>; - }; - - pins_uart0_fc_c: uart0_fc_c { - broadcom,pins = <39>, <38>; - }; - - /* PCM */ - pins_pcm_a: pcm_a { - broadcom,pins = <18>, <19>, <20>, <21>; - }; - - pins_pcm_b: pcm_b { - broadcom,pins = <28>, <29>, <30>, <31>; - }; - - /* Secondary Address Bus */ - pins_sm_addr_a: sm_addr_a { - broadcom,pins = <5>, <4>, <3>, <2>, <1>, <0>; - }; - - pins_sm_addr_b: sm_addr_b { - broadcom,pins = <33>, <32>, <31>, <30>, <29>, - <28>; - }; - - pins_sm_ctl_a: sm_ctl_a { - broadcom,pins = <6>, <7>; - }; - - pins_sm_ctl_b: sm_ctl_b { - broadcom,pins = <34>, <35>; - }; - - pins_sm_data_8bit_a: sm_data_8bit_a { - broadcom,pins = <8>, <9>, <10>, <11>, <12>, - <13>, <14>, <15>; - }; - - pins_sm_data_8bit_b: sm_data_8bit_b { - broadcom,pins = <36>, <37>, <38>, <39>, <40>, - <41>, <42>, <43>; - }; - - pins_sm_data_16bit: sm_data_16bit { - broadcom,pins = <16>, <17>, <18>, <19>, <20>, - <21>, <22>, <23>; - }; - - pins_sm_data_18bit: sm_data_18bit { - broadcom,pins = <24>, <25>; - }; - - /* BSCSL */ - pins_bscsl: bscsl { - broadcom,pins = <18>, <19>; - }; - - /* SPISL */ - pins_spisl: spisl { - broadcom,pins = <18>, <19>, <20>, <21>; - }; - - /* SPI1 */ - pins_spi1: spi1 { - broadcom,pins = <16>, <17>, <18>, <19>, <20>, - <21>; - }; - - /* UART1 */ - pins_uart1_a: uart1_a { - broadcom,pins = <14>, <15>; - }; - - pins_uart1_b: uart1_b { - broadcom,pins = <32>, <33>; - }; - - pins_uart1_c: uart1_c { - broadcom,pins = <40>, <41>; - }; - - pins_uart1_fc_a: uart1_fc_a { - broadcom,pins = <16>, <17>; - }; - - pins_uart1_fc_b: uart1_fc_b { - broadcom,pins = <30>, <31>; - }; - - pins_uart1_fc_c: uart1_fc_c { - broadcom,pins = <43>, <42>; - }; - - /* SPI2 */ - pins_spi2: spi2 { - broadcom,pins = <40>, <41>, <42>, <43>, <44>, - <45>; - }; - - /* ARM JTAG */ - pins_arm_jtag_trst: arm_jtag_trst { - broadcom,pins = <22>; - }; - - pins_arm_jtag_a: arm_jtag_a { - broadcom,pins = <4>, <5>, <6>, <12>, <13>; - }; - - pins_arm_jtag_b: arm_jtag_b { - broadcom,pins = <23>, <24>, <25>, <26>, <27>; - }; - - /* Reserved */ - pins_reserved: reserved { - broadcom,pins = <48>, <49>, <50>, <51>, <52>, - <53>; - }; - }; - - rng { - compatible = "broadcom,bcm2835-rng", - "broadcom,bcm2708-rng"; - reg = <0x104000 0x20>; - interrupts = <69>; - interrupt-parent = <&intc>; - }; - - bsc0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "broadcom,bcm2835-bsc", - "broadcom,bcm2708-bsc"; - reg = <0x205000 0x20>; - interrupts = <61>; - interrupt-parent = <&intc>; - }; - - bsc1 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "broadcom,bcm2835-bsc", - "broadcom,bcm2708-bsc"; - reg = <0x804000 0x20>; - interrupts = <61>; - interrupt-parent = <&intc>; - }; - - spi0 { - compatible = "broadcom,bcm2835-spi", - "broadcom,bcm2708-spi"; - reg = <0x204000 0x20>; - interrupts = <62>; - interrupt-parent = <&intc>; - }; - - dma: dma { - compatible = "broadcom,bcm2835-dma", - "broadcom,bcm2708-dma"; - reg = <0x7000 0x1000>, <0xE05000 0x1000>; - interrupts = <24 25 26 27 28 29 30 31 32 33 34 35 36>; - interrupt-parent = <&intc>; - - broadcom,channels = <0x7f35>; - }; - - vc_mbox: mbox { - compatible = "broadcom,bcm2835-mbox", - "broadcom,bcm2708-mbox"; - reg = <0xB880 0x40>; - interrupts = <1>; - interrupt-parent = <&intc>; - - /* Channels - * 0: Power - * 1: Frame buffer - * 2: Virtual UART - * 3: VCHIQ - * 4: LEDs - * 5: Buttons - * 6: Touch screen - */ - }; - - sdhci { - compatible = "broadcom,bcm2835-sdhci", - "broadcom,bcm2708-sdhci"; - reg = <0x300000 0x100>; - interrupts = <70>; - interrupt-parent = <&intc>; - - clock-frequency = <50000000>; /* Set by VideoCore */ - }; - - uart0: uart0 { - compatible = "broadcom,bcm2835-uart", - "broadcom,bcm2708-uart", "arm,pl011", - "arm,primecell"; - reg = <0x201000 0x1000>; - interrupts = <65>; - interrupt-parent = <&intc>; - - clock-frequency = <3000000>; /* Set by VideoCore */ - reg-shift = <2>; - }; - - vchiq: vchiq { - compatible = "broadcom,bcm2835-vchiq"; - reg = <0xB800 0x50>; - interrupts = <2>; - interrupt-parent = <&intc>; - cache-line-size = <32>; - }; - - usb { - compatible = "broadcom,bcm2835-usb", - "broadcom,bcm2708-usb", - "synopsys,designware-hs-otg2"; - reg = <0x980000 0x20000>; - interrupts = <17>; - interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <0>; - }; - - }; -}; |