diff options
Diffstat (limited to 'sys/gnu/dts/arm/at91-sama5d2_xplained.dts')
| -rw-r--r-- | sys/gnu/dts/arm/at91-sama5d2_xplained.dts | 55 |
1 files changed, 43 insertions, 12 deletions
diff --git a/sys/gnu/dts/arm/at91-sama5d2_xplained.dts b/sys/gnu/dts/arm/at91-sama5d2_xplained.dts index 2e2c3d1a1fa2..cbc26001247b 100644 --- a/sys/gnu/dts/arm/at91-sama5d2_xplained.dts +++ b/sys/gnu/dts/arm/at91-sama5d2_xplained.dts @@ -68,7 +68,7 @@ ahb { usb0: gadget@00300000 { - atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>; + atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; @@ -76,8 +76,8 @@ usb1: ohci@00400000 { num-ports = <3>; - atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */ - &pioA 42 GPIO_ACTIVE_HIGH + atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */ + &pioA PIN_PB10 GPIO_ACTIVE_HIGH 0 >; pinctrl-names = "default"; @@ -127,7 +127,7 @@ ethernet-phy@1 { reg = <0x1>; interrupt-parent = <&pioA>; - interrupts = <73 IRQ_TYPE_LEVEL_LOW>; + interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -160,9 +160,9 @@ compatible = "active-semi,act8945a"; reg = <0x5b>; active-semi,vsel-high; - active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; - active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; - active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>; + active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>; + active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>; + active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>; active-semi,input-voltage-threshold-microvolt = <6600>; active-semi,precondition-timeout = <40>; active-semi,total-timeout = <3>; @@ -309,7 +309,7 @@ vddana-supply = <&vdd_3v3_lp_reg>; vref-supply = <&vdd_3v3_lp_reg>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc_default>; + pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; status = "okay"; }; @@ -340,6 +340,20 @@ bias-disable; }; + /* + * The ADTRG pin can work on any edge type. + * In here it's being pulled up, so need to + * connect it to ground to get an edge e.g. + * Trigger can be configured on falling, rise + * or any edge, and the pull-up can be changed + * to pull-down or left floating according to + * needs. + */ + pinctrl_adtrg_default: adtrg_default { + pinmux = <PIN_PD31__ADTRG>; + bias-pull-up; + }; + pinctrl_charger_chglev: charger_chglev { pinmux = <PIN_PA12__GPIO>; bias-disable; @@ -355,6 +369,14 @@ bias-pull-up; }; + pinctrl_classd_default: classd_default { + pinmux = <PIN_PB1__CLASSD_R0>, + <PIN_PB2__CLASSD_R1>, + <PIN_PB3__CLASSD_R2>, + <PIN_PB4__CLASSD_R3>; + bias-pull-up; + }; + pinctrl_flx0_default: flx0_default { pinmux = <PIN_PB28__FLEXCOM0_IO0>, <PIN_PB29__FLEXCOM0_IO1>; @@ -488,6 +510,14 @@ }; + classd: classd@fc048000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_classd_default>; + atmel,pwm-type = "diff"; + atmel,non-overlap-time = <10>; + status = "okay"; + }; + can1: can@fc050000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_default>; @@ -504,7 +534,7 @@ bp1 { label = "PB_USER"; - gpios = <&pioA 41 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>; linux,code = <0x104>; }; }; @@ -517,17 +547,18 @@ red { label = "red"; - gpios = <&pioA 38 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>; }; + green { label = "green"; - gpios = <&pioA 37 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>; }; blue { label = "blue"; - gpios = <&pioA 32 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; |