diff options
Diffstat (limited to 'sys/netinet/sctp_pcb.h')
-rw-r--r-- | sys/netinet/sctp_pcb.h | 504 |
1 files changed, 504 insertions, 0 deletions
diff --git a/sys/netinet/sctp_pcb.h b/sys/netinet/sctp_pcb.h new file mode 100644 index 000000000000..1e0750fbecdc --- /dev/null +++ b/sys/netinet/sctp_pcb.h @@ -0,0 +1,504 @@ +/*- + * Copyright (c) 2001-2006, Cisco Systems, Inc. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * a) Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * b) Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the distribution. + * + * c) Neither the name of Cisco Systems, Inc. nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* $KAME: sctp_pcb.h,v 1.21 2005/07/16 01:18:47 suz Exp $ */ + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +#ifndef __sctp_pcb_h__ +#define __sctp_pcb_h__ + + + +/* + * We must have V6 so the size of the proto can be calculated. Otherwise we + * would not allocate enough for Net/Open BSD :-< + */ + +#if defined(_KERNEL) +#include <net/pfil.h> +#endif + +#include <sys/socket.h> +#include <sys/socketvar.h> +#include <net/if.h> +#include <net/if_types.h> +#include <net/if_var.h> +#include <net/route.h> +#include <netinet/in.h> +#include <netinet/ip6.h> +#include <netinet6/ip6_var.h> +#include <netinet6/ip6protosw.h> +#include <netinet6/in6_var.h> +#include <netinet6/in6_pcb.h> + +#ifndef in6pcb +#define in6pcb inpcb +#endif + +#include <netinet/sctp.h> +#include <netinet/sctp_os.h> +#include <netinet/sctp_constants.h> + +LIST_HEAD(sctppcbhead, sctp_inpcb); +LIST_HEAD(sctpasochead, sctp_tcb); +LIST_HEAD(sctpladdr, sctp_laddr); +LIST_HEAD(sctpvtaghead, sctp_tagblock); +TAILQ_HEAD(sctp_readhead, sctp_queued_to_read); +TAILQ_HEAD(sctp_streamhead, sctp_stream_queue_pending); + +#include <netinet/sctp_structs.h> +#include <netinet/sctp_uio.h> +#include <netinet/sctp_auth.h> + +/* + * PCB flags (in sctp_flags bitmask) + */ +#define SCTP_PCB_FLAGS_UDPTYPE 0x00000001 +#define SCTP_PCB_FLAGS_TCPTYPE 0x00000002 +#define SCTP_PCB_FLAGS_BOUNDALL 0x00000004 +#define SCTP_PCB_FLAGS_ACCEPTING 0x00000008 +#define SCTP_PCB_FLAGS_UNBOUND 0x00000010 +#define SCTP_PCB_FLAGS_CLOSE_IP 0x00040000 +#define SCTP_PCB_FLAGS_WAS_CONNECTED 0x00080000 +#define SCTP_PCB_FLAGS_WAS_ABORTED 0x00100000 +/* TCP model support */ + +#define SCTP_PCB_FLAGS_CONNECTED 0x00200000 +#define SCTP_PCB_FLAGS_IN_TCPPOOL 0x00400000 +#define SCTP_PCB_FLAGS_DONT_WAKE 0x00800000 +#define SCTP_PCB_FLAGS_WAKEOUTPUT 0x01000000 +#define SCTP_PCB_FLAGS_WAKEINPUT 0x02000000 +#define SCTP_PCB_FLAGS_BOUND_V6 0x04000000 +#define SCTP_PCB_FLAGS_NEEDS_MAPPED_V4 0x08000000 +#define SCTP_PCB_FLAGS_BLOCKING_IO 0x10000000 +#define SCTP_PCB_FLAGS_SOCKET_GONE 0x20000000 +#define SCTP_PCB_FLAGS_SOCKET_ALLGONE 0x40000000 +/* flags to copy to new PCB */ +#define SCTP_PCB_COPY_FLAGS 0x0e000004 + + +/* + * PCB Features (in sctp_features bitmask) + */ +#define SCTP_PCB_FLAGS_EXT_RCVINFO 0x00000004 +#define SCTP_PCB_FLAGS_DONOT_HEARTBEAT 0x00000008 +#define SCTP_PCB_FLAGS_FRAG_INTERLEAVE 0x00000010 +#define SCTP_PCB_FLAGS_DO_ASCONF 0x00000020 +#define SCTP_PCB_FLAGS_AUTO_ASCONF 0x00000040 +/* socket options */ +#define SCTP_PCB_FLAGS_NODELAY 0x00000100 +#define SCTP_PCB_FLAGS_AUTOCLOSE 0x00000200 +#define SCTP_PCB_FLAGS_RECVDATAIOEVNT 0x00000400 +#define SCTP_PCB_FLAGS_RECVASSOCEVNT 0x00000800 +#define SCTP_PCB_FLAGS_RECVPADDREVNT 0x00001000 +#define SCTP_PCB_FLAGS_RECVPEERERR 0x00002000 +#define SCTP_PCB_FLAGS_RECVSENDFAILEVNT 0x00004000 +#define SCTP_PCB_FLAGS_RECVSHUTDOWNEVNT 0x00008000 +#define SCTP_PCB_FLAGS_ADAPTATIONEVNT 0x00010000 +#define SCTP_PCB_FLAGS_PDAPIEVNT 0x00020000 +#define SCTP_PCB_FLAGS_AUTHEVNT 0x00040000 +#define SCTP_PCB_FLAGS_STREAM_RESETEVNT 0x00080000 +#define SCTP_PCB_FLAGS_NO_FRAGMENT 0x00100000 +#define SCTP_PCB_FLAGS_EXPLICIT_EOR 0x00200000 + + +#define SCTP_PCBHASH_ALLADDR(port, mask) (port & mask) +#define SCTP_PCBHASH_ASOC(tag, mask) (tag & mask) + +struct sctp_laddr { + LIST_ENTRY(sctp_laddr) sctp_nxt_addr; /* next in list */ + struct ifaddr *ifa; + int action; /* Only used in delayed asconf stuff */ +}; + +struct sctp_block_entry { + int error; +}; + +struct sctp_timewait { + uint32_t tv_sec_at_expire; /* the seconds from boot to expire */ + uint32_t v_tag; /* the vtag that can not be reused */ +}; + +struct sctp_tagblock { + LIST_ENTRY(sctp_tagblock) sctp_nxt_tagblock; + struct sctp_timewait vtag_block[SCTP_NUMBER_IN_VTAG_BLOCK]; +}; + + +struct sctp_epinfo { + struct sctpasochead *sctp_asochash; + u_long hashasocmark; + + struct sctppcbhead *sctp_ephash; + u_long hashmark; + + struct sctpasochead *sctp_restarthash; + u_long hashrestartmark; + /* + * The TCP model represents a substantial overhead in that we get an + * additional hash table to keep explicit connections in. The + * listening TCP endpoint will exist in the usual ephash above and + * accept only INIT's. It will be incapable of sending off an INIT. + * When a dg arrives we must look in the normal ephash. If we find a + * TCP endpoint that will tell us to go to the specific endpoint + * hash and re-hash to find the right assoc/socket. If we find a UDP + * model socket we then must complete the lookup. If this fails, + * i.e. no association can be found then we must continue to see if + * a sctp_peeloff()'d socket is in the tcpephash (a spun off socket + * acts like a TCP model connected socket). + */ + struct sctppcbhead *sctp_tcpephash; + u_long hashtcpmark; + uint32_t hashtblsize; + + struct sctppcbhead listhead; + struct sctpladdr addr_wq; + + struct sctpiterators iteratorhead; + + /* ep zone info */ + sctp_zone_t ipi_zone_ep; + sctp_zone_t ipi_zone_asoc; + sctp_zone_t ipi_zone_laddr; + sctp_zone_t ipi_zone_net; + sctp_zone_t ipi_zone_chunk; + sctp_zone_t ipi_zone_readq; + sctp_zone_t ipi_zone_strmoq; + + struct mtx ipi_ep_mtx; + struct mtx it_mtx; + struct mtx ipi_addr_mtx; + uint32_t ipi_count_ep; + + /* assoc/tcb zone info */ + uint32_t ipi_count_asoc; + + /* local addrlist zone info */ + uint32_t ipi_count_laddr; + + /* remote addrlist zone info */ + uint32_t ipi_count_raddr; + + /* chunk structure list for output */ + uint32_t ipi_count_chunk; + + /* socket queue zone info */ + uint32_t ipi_count_readq; + + /* socket queue zone info */ + uint32_t ipi_count_strmoq; + + /* system wide number of free chunks hanging around */ + uint32_t ipi_free_chunks; + uint32_t ipi_free_strmoq; + + struct sctpvtaghead vtag_timewait[SCTP_STACK_VTAG_HASH_SIZE]; + + + struct sctp_timer addr_wq_timer; + + /* for port allocations */ + uint16_t lastport; + uint16_t lastlow; + uint16_t lasthi; + +}; + +extern struct sctpstat sctpstat; + +/* + * Here we have all the relevant information for each SCTP entity created. We + * will need to modify this as approprate. We also need to figure out how to + * access /dev/random. + */ +struct sctp_pcb { + unsigned int time_of_secret_change; /* number of seconds from + * timeval.tv_sec */ + uint32_t secret_key[SCTP_HOW_MANY_SECRETS][SCTP_NUMBER_OF_SECRETS]; + unsigned int size_of_a_cookie; + + unsigned int sctp_timeoutticks[SCTP_NUM_TMRS]; + unsigned int sctp_minrto; + unsigned int sctp_maxrto; + unsigned int initial_rto; + + int initial_init_rto_max; + + uint32_t sctp_sws_sender; + uint32_t sctp_sws_receiver; + + /* authentication related fields */ + struct sctp_keyhead shared_keys; + sctp_auth_chklist_t *local_auth_chunks; + sctp_hmaclist_t *local_hmacs; + uint16_t default_keyid; + + /* various thresholds */ + /* Max times I will init at a guy */ + uint16_t max_init_times; + + /* Max times I will send before we consider someone dead */ + uint16_t max_send_times; + + uint16_t def_net_failure; + + /* number of streams to pre-open on a association */ + uint16_t pre_open_stream_count; + uint16_t max_open_streams_intome; + + /* random number generator */ + uint32_t random_counter; + uint8_t random_numbers[SCTP_SIGNATURE_ALOC_SIZE]; + uint8_t random_store[SCTP_SIGNATURE_ALOC_SIZE]; + + /* + * This timer is kept running per endpoint. When it fires it will + * change the secret key. The default is once a hour + */ + struct sctp_timer signature_change; + int def_cookie_life; + /* defaults to 0 */ + int auto_close_time; + uint32_t initial_sequence_debug; + uint32_t adaptation_layer_indicator; + char store_at; + uint8_t max_burst; + char current_secret_number; + char last_secret_number; +}; + +#ifndef SCTP_ALIGNMENT +#define SCTP_ALIGNMENT 32 +#endif + +#ifndef SCTP_ALIGNM1 +#define SCTP_ALIGNM1 (SCTP_ALIGNMENT-1) +#endif + +#define sctp_lport ip_inp.inp.inp_lport + +struct sctp_inpcb { + /* + * put an inpcb in front of it all, kind of a waste but we need to + * for compatability with all the other stuff. + */ + union { + struct inpcb inp; + char align[(sizeof(struct in6pcb) + SCTP_ALIGNM1) & + ~SCTP_ALIGNM1]; + } ip_inp; + + + /* Socket buffer lock protects read_queue and of course sb_cc */ + struct sctp_readhead read_queue; + + LIST_ENTRY(sctp_inpcb) sctp_list; /* lists all endpoints */ + /* hash of all endpoints for model */ + LIST_ENTRY(sctp_inpcb) sctp_hash; + /* count of local addresses bound, 0 if bound all */ + int laddr_count; + /* list of addrs in use by the EP */ + struct sctpladdr sctp_addr_list; + /* used for source address selection rotation */ + struct sctp_laddr *next_addr_touse; + struct ifnet *next_ifn_touse; + /* back pointer to our socket */ + struct socket *sctp_socket; + uint32_t sctp_flags; /* INP state flag set */ + uint32_t sctp_features; /* Feature flags */ + struct sctp_pcb sctp_ep;/* SCTP ep data */ + /* head of the hash of all associations */ + struct sctpasochead *sctp_tcbhash; + u_long sctp_hashmark; + /* head of the list of all associations */ + struct sctpasochead sctp_asoc_list; + struct sctp_iterator *inp_starting_point_for_iterator; + uint32_t sctp_frag_point; + uint32_t partial_delivery_point; + uint32_t sctp_context; + struct sctp_sndrcvinfo def_send; + /* + * These three are here for the sosend_dgram (pkt, pkt_last and + * control). routine. However, I don't think anyone in the current + * FreeBSD kernel calls this. So they are candidates with sctp_sendm + * for de-supporting. + */ + struct mbuf *pkt, *pkt_last; + struct mbuf *control; + struct mtx inp_mtx; + struct mtx inp_create_mtx; + struct mtx inp_rdata_mtx; + int32_t refcount; +}; + +struct sctp_tcb { + struct socket *sctp_socket; /* back pointer to socket */ + struct sctp_inpcb *sctp_ep; /* back pointer to ep */ + LIST_ENTRY(sctp_tcb) sctp_tcbhash; /* next link in hash + * table */ + LIST_ENTRY(sctp_tcb) sctp_tcblist; /* list of all of the + * TCB's */ + LIST_ENTRY(sctp_tcb) sctp_tcbrestarhash; /* next link in restart + * hash table */ + LIST_ENTRY(sctp_tcb) sctp_asocs; /* vtag hash list */ + struct sctp_block_entry *block_entry; /* pointer locked by socket + * send buffer */ + struct sctp_association asoc; + /* + * freed_by_sorcv_sincelast is protected by the sockbuf_lock NOT the + * tcb_lock. Its special in this way to help avoid extra mutex calls + * in the reading of data. + */ + uint32_t freed_by_sorcv_sincelast; + uint16_t rport; /* remote port in network format */ + uint16_t resv; + struct mtx tcb_mtx; + struct mtx tcb_send_mtx; +}; + + + +#include <netinet/sctp_lock_bsd.h> + + + +#if defined(_KERNEL) + +extern struct sctp_epinfo sctppcbinfo; +extern int sctp_auto_asconf; + +int SCTP6_ARE_ADDR_EQUAL(struct in6_addr *a, struct in6_addr *b); + +void sctp_fill_pcbinfo(struct sctp_pcbinfo *); + +struct sctp_nets *sctp_findnet(struct sctp_tcb *, struct sockaddr *); + +struct sctp_inpcb *sctp_pcb_findep(struct sockaddr *, int, int); + +int sctp_inpcb_bind(struct socket *, struct sockaddr *, struct thread *); + + +struct sctp_tcb * +sctp_findassociation_addr(struct mbuf *, int, int, + struct sctphdr *, struct sctp_chunkhdr *, struct sctp_inpcb **, + struct sctp_nets **); + +struct sctp_tcb * +sctp_findassociation_addr_sa(struct sockaddr *, + struct sockaddr *, struct sctp_inpcb **, struct sctp_nets **, int); + +void +sctp_move_pcb_and_assoc(struct sctp_inpcb *, struct sctp_inpcb *, + struct sctp_tcb *); + +/* + * For this call ep_addr, the to is the destination endpoint address of the + * peer (relative to outbound). The from field is only used if the TCP model + * is enabled and helps distingush amongst the subset bound (non-boundall). + * The TCP model MAY change the actual ep field, this is why it is passed. + */ +struct sctp_tcb * +sctp_findassociation_ep_addr(struct sctp_inpcb **, + struct sockaddr *, struct sctp_nets **, struct sockaddr *, + struct sctp_tcb *); + +struct sctp_tcb * +sctp_findassociation_ep_asocid(struct sctp_inpcb *, + sctp_assoc_t, int); + +struct sctp_tcb * +sctp_findassociation_ep_asconf(struct mbuf *, int, int, + struct sctphdr *, struct sctp_inpcb **, struct sctp_nets **); + +int sctp_inpcb_alloc(struct socket *); + +int sctp_is_address_on_local_host(struct sockaddr *addr); + +void sctp_inpcb_free(struct sctp_inpcb *, int, int); + +struct sctp_tcb * +sctp_aloc_assoc(struct sctp_inpcb *, struct sockaddr *, + int, int *, uint32_t); + +int sctp_free_assoc(struct sctp_inpcb *, struct sctp_tcb *, int); + +int sctp_add_local_addr_ep(struct sctp_inpcb *, struct ifaddr *); + +int sctp_insert_laddr(struct sctpladdr *, struct ifaddr *); + +void sctp_remove_laddr(struct sctp_laddr *); + +int sctp_del_local_addr_ep(struct sctp_inpcb *, struct ifaddr *); + +int sctp_del_local_addr_ep_sa(struct sctp_inpcb *, struct sockaddr *); + +int sctp_add_remote_addr(struct sctp_tcb *, struct sockaddr *, int, int); + +void sctp_remove_net(struct sctp_tcb *, struct sctp_nets *); + +int sctp_del_remote_addr(struct sctp_tcb *, struct sockaddr *); + +void sctp_pcb_init(void); + +int sctp_add_local_addr_assoc(struct sctp_tcb *, struct ifaddr *); + +int sctp_del_local_addr_assoc(struct sctp_tcb *, struct ifaddr *); + +int sctp_del_local_addr_assoc_sa(struct sctp_tcb *, struct sockaddr *); + +int +sctp_load_addresses_from_init(struct sctp_tcb *, struct mbuf *, int, int, + int, struct sctphdr *, struct sockaddr *); + +int +sctp_set_primary_addr(struct sctp_tcb *, struct sockaddr *, + struct sctp_nets *); + +int sctp_is_vtag_good(struct sctp_inpcb *, uint32_t, struct timeval *); + +/* void sctp_drain(void); */ + +int sctp_destination_is_reachable(struct sctp_tcb *, struct sockaddr *); + +/* + * Null in last arg inpcb indicate run on ALL ep's. Specific inp in last arg + * indicates run on ONLY assoc's of the specified endpoint. + */ +int +sctp_initiate_iterator(inp_func inpf, asoc_func af, uint32_t, uint32_t, + uint32_t, void *, uint32_t, end_func ef, struct sctp_inpcb *, uint8_t co_off); + + + +#endif /* _KERNEL */ +#endif /* !__sctp_pcb_h__ */ |