diff options
Diffstat (limited to 'sys/powerpc/mpc85xx/fsl_sata.h')
| -rw-r--r-- | sys/powerpc/mpc85xx/fsl_sata.h | 138 | 
1 files changed, 138 insertions, 0 deletions
| diff --git a/sys/powerpc/mpc85xx/fsl_sata.h b/sys/powerpc/mpc85xx/fsl_sata.h new file mode 100644 index 000000000000..af9a788c288e --- /dev/null +++ b/sys/powerpc/mpc85xx/fsl_sata.h @@ -0,0 +1,138 @@ +/*- + * Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org> + * Copyright (c) 2009-2012 Alexander Motin <mav@FreeBSD.org> + * Copyright (c) 2015-2016 Justin Hibbits <jhibbits@FreeBSD.org> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + *    notice, this list of conditions and the following disclaimer, + *    without modification, immediately at the beginning of the file. + * 2. Redistributions in binary form must reproduce the above copyright + *    notice, this list of conditions and the following disclaimer in the + *    documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* ATA register defines */ + +#define ATA_FEATURE                     1       /* (W) feature */ +#define         ATA_F_DMA               0x01    /* enable DMA */ +#define         ATA_F_OVL               0x02    /* enable overlap */ + +#define ATA_COUNT                       2       /* (W) sector count */ + +#define ATA_SECTOR                      3       /* (RW) sector # */ +#define ATA_CYL_LSB                     4       /* (RW) cylinder# LSB */ +#define ATA_CYL_MSB                     5       /* (RW) cylinder# MSB */ +#define ATA_DRIVE                       6       /* (W) Sector/Drive/Head */ +#define         ATA_D_LBA               0x40    /* use LBA addressing */ +#define         ATA_D_IBM               0xa0    /* 512 byte sectors, ECC */ + +#define ATA_COMMAND                     7       /* (W) command */ + +#define ATA_ERROR                       8       /* (R) error */ +#define         ATA_E_ILI               0x01    /* illegal length */ +#define         ATA_E_NM                0x02    /* no media */ +#define         ATA_E_ABORT             0x04    /* command aborted */ +#define         ATA_E_MCR               0x08    /* media change request */ +#define         ATA_E_IDNF              0x10    /* ID not found */ +#define         ATA_E_MC                0x20    /* media changed */ +#define         ATA_E_UNC               0x40    /* uncorrectable data */ +#define         ATA_E_ICRC              0x80    /* UDMA crc error */ +#define		ATA_E_ATAPI_SENSE_MASK	0xf0	/* ATAPI sense key mask */ + +#define ATA_IREASON                     9       /* (R) interrupt reason */ +#define         ATA_I_CMD               0x01    /* cmd (1) | data (0) */ +#define         ATA_I_IN                0x02    /* read (1) | write (0) */ +#define         ATA_I_RELEASE           0x04    /* released bus (1) */ +#define         ATA_I_TAGMASK           0xf8    /* tag mask */ + +#define ATA_STATUS                      10      /* (R) status */ +#define ATA_ALTSTAT                     11      /* (R) alternate status */ +#define         ATA_S_ERROR             0x01    /* error */ +#define         ATA_S_INDEX             0x02    /* index */ +#define         ATA_S_CORR              0x04    /* data corrected */ +#define         ATA_S_DRQ               0x08    /* data request */ +#define         ATA_S_DSC               0x10    /* drive seek completed */ +#define         ATA_S_SERVICE           0x10    /* drive needs service */ +#define         ATA_S_DWF               0x20    /* drive write fault */ +#define         ATA_S_DMA               0x20    /* DMA ready */ +#define         ATA_S_READY             0x40    /* drive ready */ +#define         ATA_S_BUSY              0x80    /* busy */ + +#define ATA_CONTROL                     12      /* (W) control */ +#define         ATA_A_IDS               0x02    /* disable interrupts */ +#define         ATA_A_RESET             0x04    /* RESET controller */ +#define         ATA_A_4BIT              0x08    /* 4 head bits */ +#define         ATA_A_HOB               0x80    /* High Order Byte enable */ + +/* SATA register defines */ +#define ATA_SSTATUS                     13 +#define         ATA_SS_DET_MASK         0x0000000f +#define         ATA_SS_DET_NO_DEVICE    0x00000000 +#define         ATA_SS_DET_DEV_PRESENT  0x00000001 +#define         ATA_SS_DET_PHY_ONLINE   0x00000003 +#define         ATA_SS_DET_PHY_OFFLINE  0x00000004 + +#define         ATA_SS_SPD_MASK         0x000000f0 +#define         ATA_SS_SPD_NO_SPEED     0x00000000 +#define         ATA_SS_SPD_GEN1         0x00000010 +#define         ATA_SS_SPD_GEN2         0x00000020 +#define         ATA_SS_SPD_GEN3         0x00000030 + +#define         ATA_SS_IPM_MASK         0x00000f00 +#define         ATA_SS_IPM_NO_DEVICE    0x00000000 +#define         ATA_SS_IPM_ACTIVE       0x00000100 +#define         ATA_SS_IPM_PARTIAL      0x00000200 +#define         ATA_SS_IPM_SLUMBER      0x00000600 +#define         ATA_SS_IPM_DEVSLEEP     0x00000800 + +#define ATA_SERROR                      14 +#define         ATA_SE_DATA_CORRECTED   0x00000001 +#define         ATA_SE_COMM_CORRECTED   0x00000002 +#define         ATA_SE_DATA_ERR         0x00000100 +#define         ATA_SE_COMM_ERR         0x00000200 +#define         ATA_SE_PROT_ERR         0x00000400 +#define         ATA_SE_HOST_ERR         0x00000800 +#define         ATA_SE_PHY_CHANGED      0x00010000 +#define         ATA_SE_PHY_IERROR       0x00020000 +#define         ATA_SE_COMM_WAKE        0x00040000 +#define         ATA_SE_DECODE_ERR       0x00080000 +#define         ATA_SE_PARITY_ERR       0x00100000 +#define         ATA_SE_CRC_ERR          0x00200000 +#define         ATA_SE_HANDSHAKE_ERR    0x00400000 +#define         ATA_SE_LINKSEQ_ERR      0x00800000 +#define         ATA_SE_TRANSPORT_ERR    0x01000000 +#define         ATA_SE_UNKNOWN_FIS      0x02000000 +#define         ATA_SE_EXCHANGED        0x04000000 + +#define ATA_SCONTROL                    15 +#define         ATA_SC_DET_MASK         0x0000000f +#define         ATA_SC_DET_IDLE         0x00000000 +#define         ATA_SC_DET_RESET        0x00000001 +#define         ATA_SC_DET_DISABLE      0x00000004 + +#define         ATA_SC_SPD_MASK         0x000000f0 +#define         ATA_SC_SPD_NO_SPEED     0x00000000 +#define         ATA_SC_SPD_SPEED_GEN1   0x00000010 +#define         ATA_SC_SPD_SPEED_GEN2   0x00000020 +#define         ATA_SC_SPD_SPEED_GEN3   0x00000030 + +#define         ATA_SC_IPM_MASK         0x00000f00 +#define         ATA_SC_IPM_NONE         0x00000000 +#define         ATA_SC_IPM_DIS_PARTIAL  0x00000100 +#define         ATA_SC_IPM_DIS_SLUMBER  0x00000200 +#define         ATA_SC_IPM_DIS_DEVSLEEP 0x00000400 | 
