diff options
Diffstat (limited to 'tests/sys/netinet/fibs_test.sh')
| -rw-r--r-- | tests/sys/netinet/fibs_test.sh | 45 |
1 files changed, 14 insertions, 31 deletions
diff --git a/tests/sys/netinet/fibs_test.sh b/tests/sys/netinet/fibs_test.sh index 5c1a918abb2c..2d0b63f8e30a 100644 --- a/tests/sys/netinet/fibs_test.sh +++ b/tests/sys/netinet/fibs_test.sh @@ -30,9 +30,6 @@ # Authors: Alan Somers (Spectra Logic Corporation) # -# All of the tests in this file requires the test-suite config variable "fibs" -# to be defined to a space-delimited list of FIBs that may be used for testing. - # arpresolve should check the interface fib for routes to a target when # creating an ARP table entry. This is a regression for kern/167947, where # arpresolve only checked the default route. @@ -48,7 +45,6 @@ arpresolve_checks_interface_fib_head() { atf_set "descr" "arpresolve should check the interface fib, not the default fib, for routes" atf_set "require.user" "root" - atf_set "require.config" "fibs" atf_set "require.progs" "nping" } arpresolve_checks_interface_fib_body() @@ -100,7 +96,6 @@ loopback_and_network_routes_on_nondefault_fib_head() { atf_set "descr" "When creating and deleting loopback IPv4 routes, use the interface's fib" atf_set "require.user" "root" - atf_set "require.config" "fibs" } loopback_and_network_routes_on_nondefault_fib_body() @@ -157,7 +152,6 @@ loopback_and_network_routes_on_nondefault_fib_inet6_head() { atf_set "descr" "When creating and deleting loopback IPv6 routes, use the interface's fib" atf_set "require.user" "root" - atf_set "require.config" "fibs" } loopback_and_network_routes_on_nondefault_fib_inet6_body() @@ -216,7 +210,6 @@ default_route_with_multiple_fibs_on_same_subnet_head() { atf_set "descr" "Multiple interfaces on the same subnet but with different fibs can both have default IPv4 routes" atf_set "require.user" "root" - atf_set "require.config" "fibs" } default_route_with_multiple_fibs_on_same_subnet_body() @@ -263,7 +256,6 @@ default_route_with_multiple_fibs_on_same_subnet_inet6_head() { atf_set "descr" "Multiple interfaces on the same subnet but with different fibs can both have default IPv6 routes" atf_set "require.user" "root" - atf_set "require.config" "fibs" } default_route_with_multiple_fibs_on_same_subnet_inet6_body() @@ -315,7 +307,6 @@ same_ip_multiple_ifaces_fib0_head() { atf_set "descr" "Can remove an IPv4 alias from an interface when the same IPv4 is also assigned to another interface." atf_set "require.user" "root" - atf_set "require.config" "fibs" } same_ip_multiple_ifaces_fib0_body() { @@ -329,6 +320,9 @@ same_ip_multiple_ifaces_fib0_body() # Setup the interfaces, then remove one alias. It should not panic. setup_tap 0 inet ${ADDR} ${MASK0} TAP0=${TAP} + # After commit 361a8395f0b0e6f254fd138798232529679d99f6 it became + # an error to assign the same interface address twice. + atf_expect_fail "The test results in an ifconfig error and thus spuriously fails" setup_tap 0 inet ${ADDR} ${MASK1} TAP1=${TAP} ifconfig ${TAP1} -alias ${ADDR} @@ -358,18 +352,16 @@ same_ip_multiple_ifaces_head() { atf_set "descr" "Can remove an IPv4 alias from an interface when the same address is also assigned to another interface, on non-default FIBs." atf_set "require.user" "root" - atf_set "require.config" "fibs" } same_ip_multiple_ifaces_body() { - atf_expect_fail "kern/189088 Assigning the same IP to multiple interfaces in different FIBs creates a host route for only one" ADDR="192.0.2.2" MASK0="24" MASK1="32" # Unlike most of the tests in this file, this is applicable regardless # of net.add_addr_allfibs - get_fibs 2 + get_fibs 4 # Setup the interfaces, then remove one alias. It should not panic. setup_tap ${FIB0} inet ${ADDR} ${MASK0} @@ -381,13 +373,13 @@ same_ip_multiple_ifaces_body() setfib ${FIB1} netstat -rn -f inet # Do it again, in the opposite order. It should not panic. - setup_tap ${FIB0} inet ${ADDR} ${MASK0} + setup_tap ${FIB2} inet ${ADDR} ${MASK0} TAP0=${TAP} - setup_tap ${FIB1} inet ${ADDR} ${MASK1} + setup_tap ${FIB3} inet ${ADDR} ${MASK1} TAP1=${TAP} ifconfig ${TAP0} -alias ${ADDR} atf_check -o not-match:"^${ADDR}[[:space:]]" \ - setfib ${FIB0} netstat -rn -f inet + setfib ${FIB2} netstat -rn -f inet } same_ip_multiple_ifaces_cleanup() { @@ -404,7 +396,6 @@ same_ip_multiple_ifaces_inet6_head() { atf_set "descr" "Can remove an IPv6 alias from an interface when the same address is also assigned to another interface, on non-default FIBs." atf_set "require.user" "root" - atf_set "require.config" "fibs" } same_ip_multiple_ifaces_inet6_body() { @@ -446,7 +437,7 @@ slaac_on_nondefault_fib6_head() { atf_set "descr" "SLAAC correctly installs routes on non-default FIBs" atf_set "require.user" "root" - atf_set "require.config" "fibs" "allow_sysctl_side_effects" + atf_set "require.config" "allow_sysctl_side_effects" } slaac_on_nondefault_fib6_body() { @@ -533,7 +524,6 @@ subnet_route_with_multiple_fibs_on_same_subnet_head() { atf_set "descr" "Multiple FIBs can have IPv4 subnet routes for the same subnet" atf_set "require.user" "root" - atf_set "require.config" "fibs" } subnet_route_with_multiple_fibs_on_same_subnet_body() @@ -570,7 +560,6 @@ subnet_route_with_multiple_fibs_on_same_subnet_inet6_head() { atf_set "descr" "Multiple FIBs can have IPv6 subnet routes for the same subnet" atf_set "require.user" "root" - atf_set "require.config" "fibs" } subnet_route_with_multiple_fibs_on_same_subnet_inet6_body() @@ -620,7 +609,6 @@ udp_dontroute_head() { atf_set "descr" "Source address selection for UDP packets with SO_DONTROUTE on non-default FIBs works" atf_set "require.user" "root" - atf_set "require.config" "fibs" } udp_dontroute_body() @@ -671,7 +659,6 @@ udp_dontroute6_head() { atf_set "descr" "Source address selection for UDP IPv6 packets with SO_DONTROUTE on non-default FIBs works" atf_set "require.user" "root" - atf_set "require.config" "fibs" } udp_dontroute6_body() @@ -748,15 +735,13 @@ get_fibs() { NUMFIBS=$1 net_fibs=`sysctl -n net.fibs` + if [ $net_fibs -lt $(($NUMFIBS + 1)) ]; then + atf_check -o ignore sysctl net.fibs=$(($NUMFIBS + 1)) + net_fibs=`sysctl -n net.fibs` + fi i=0 while [ $i -lt "$NUMFIBS" ]; do - fib=`atf_config_get "fibs" | \ - awk -v i=$(( i + 1 )) '{print $i}'` - echo "fib is ${fib}" - eval FIB${i}=${fib} - if [ "$fib" -ge "$net_fibs" ]; then - atf_skip "The ${i}th configured fib is ${fib}, which is not less than net.fibs, which is ${net_fibs}" - fi + eval FIB${i}=$(($i + 1)) i=$(( $i + 1 )) done } @@ -816,9 +801,7 @@ setup_iface() local ADDR=$4 local MASK=$5 local FLAGS=$6 - echo setfib ${FIB} \ - ifconfig $IFACE ${PROTO} ${ADDR}/${MASK} fib $FIB $FLAGS - setfib ${FIB} ifconfig $IFACE ${PROTO} ${ADDR}/${MASK} fib $FIB $FLAGS + atf_check setfib ${FIB} ifconfig $IFACE ${PROTO} ${ADDR}/${MASK} fib $FIB $FLAGS } # Create a tap(4) interface, configure it, and register it for cleanup. |