diff options
Diffstat (limited to 'usr.sbin/bsdinstall/scripts/zfsboot')
| -rwxr-xr-x | usr.sbin/bsdinstall/scripts/zfsboot | 143 |
1 files changed, 9 insertions, 134 deletions
diff --git a/usr.sbin/bsdinstall/scripts/zfsboot b/usr.sbin/bsdinstall/scripts/zfsboot index 493f137092ec..a3c1e2ddb89f 100755 --- a/usr.sbin/bsdinstall/scripts/zfsboot +++ b/usr.sbin/bsdinstall/scripts/zfsboot @@ -51,7 +51,7 @@ f_include $BSDCFG_SHARE/variable.subr # # Default options to use when creating zroot pool # -: ${ZFSBOOT_POOL_CREATE_OPTIONS:=-O compress=lz4 -O atime=off} +: ${ZFSBOOT_POOL_CREATE_OPTIONS:=-O compression=on -O atime=off} # # Default name for the boot environment parent dataset @@ -86,7 +86,7 @@ f_include $BSDCFG_SHARE/variable.subr # # Create a separate boot pool? -# NB: Automatically set when using geli(8) or MBR +# NB: Automatically set when using geli(8) # : ${ZFSBOOT_BOOT_POOL=} @@ -96,12 +96,12 @@ f_include $BSDCFG_SHARE/variable.subr : ${ZFSBOOT_BOOT_POOL_CREATE_OPTIONS:=} # -# Default name for boot pool when enabled (e.g., geli(8) or MBR) +# Default name for boot pool when enabled (e.g., geli(8)) # : ${ZFSBOOT_BOOT_POOL_NAME:=bootpool} # -# Default size for boot pool when enabled (e.g., geli(8) or MBR) +# Default size for boot pool when enabled (e.g., geli(8)) # : ${ZFSBOOT_BOOT_POOL_SIZE:=2g} @@ -790,7 +790,7 @@ zfs_create_diskpart() # Check for unknown partition scheme before proceeding further case "$ZFSBOOT_PARTITION_SCHEME" in - ""|MBR|GPT*) : known good ;; + ""|GPT*) : known good ;; *) f_dprintf "$funcname: %s is an unsupported partition scheme" \ "$ZFSBOOT_PARTITION_SCHEME" @@ -825,14 +825,11 @@ zfs_create_diskpart() # # Lay down the desired type of partition scheme # - local setsize mbrindex align_small align_big + local setsize align_small align_big # # If user has requested 4 K alignment, add these params to the # gpart add calls. With GPT, we align large partitions to 1 M for - # improved performance on SSDs. MBR does not always play well with gaps - # between partitions, so all alignment is only 4k for that case. - # With MBR, we align the BSD partition that contains the MBR, otherwise - # the system fails to boot. + # improved performance on SSDs. # if [ "$ZFSBOOT_FORCE_4K_SECTORS" ]; then align_small="-a 4k" @@ -974,90 +971,6 @@ zfs_create_diskpart() /dev/$disk$targetpart ;; - MBR) f_dprintf "$funcname: Creating MBR layout..." - # - # Enable boot pool if encryption is desired - # - [ "$ZFSBOOT_GELI_ENCRYPTION" ] && ZFSBOOT_BOOT_POOL=1 - # - # 1. Create MBR layout (no labels) - # - f_eval_catch $funcname gpart "$GPART_CREATE" mbr $disk || - return $FAILURE - f_eval_catch $funcname gpart "$GPART_BOOTCODE" /boot/mbr \ - $disk || return $FAILURE - - # - # 2. Add freebsd slice with all available space - # - f_eval_catch $funcname gpart "$GPART_ADD_ALIGN" \ - "$align_small" freebsd $disk || return $FAILURE - f_eval_catch $funcname gpart "$GPART_SET_ACTIVE" 1 $disk || - return $FAILURE - # Pedantically nuke any old labels - f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ - /dev/${disk}s1 - # Pedantically nuke any old scheme - f_eval_catch -d $funcname gpart "$GPART_DESTROY_F" ${disk}s1 - - # - # 3. Write BSD scheme to the freebsd slice - # - f_eval_catch $funcname gpart "$GPART_CREATE" BSD ${disk}s1 || - return $FAILURE - - # NB: ZFS pools will use s1a (no labels) - bootpart=s1a swappart=s1b targetpart=s1d mbrindex=4 - - # - # Always prepare a boot pool on MBR - # Do not align this partition, there must not be a gap - # - ZFSBOOT_BOOT_POOL=1 - f_eval_catch $funcname gpart \ - "$GPART_ADD_ALIGN_INDEX_WITH_SIZE" \ - "" 1 freebsd-zfs ${bootsize}b ${disk}s1 || - return $FAILURE - # Pedantically nuke any old labels - f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ - /dev/$disk$bootpart - if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then - # Pedantically detach targetpart for later - f_eval_catch -d $funcname geli \ - "$GELI_DETACH_F" \ - /dev/$disk$targetpart - fi - - # - # 4. Add freebsd-swap partition - # - if [ ${swapsize:-0} -gt 0 ]; then - f_eval_catch $funcname gpart \ - "$GPART_ADD_ALIGN_INDEX_WITH_SIZE" \ - "$align_small" 2 freebsd-swap \ - ${swapsize}b ${disk}s1 || return $FAILURE - # Pedantically nuke any old labels on the swap - f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ - /dev/${disk}s1b - fi - - # - # 5. Add freebsd-zfs partition for zroot - # - if [ "$ZFSBOOT_POOL_SIZE" ]; then - f_eval_catch $funcname gpart "$GPART_ADD_ALIGN_INDEX_WITH_SIZE" \ - "$align_small" $mbrindex freebsd-zfs $ZFSBOOT_POOL_SIZE ${disk}s1 || return $FAILURE - else - f_eval_catch $funcname gpart "$GPART_ADD_ALIGN_INDEX" \ - "$align_small" $mbrindex freebsd-zfs ${disk}s1 || return $FAILURE - fi - f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ - /dev/$disk$targetpart # Pedantic - f_eval_catch $funcname dd "$DD_WITH_OPTIONS" \ - /boot/zfsboot /dev/${disk}s1 count=1 || - return $FAILURE - ;; - esac # $ZFSBOOT_PARTITION_SCHEME # Update fstab(5) @@ -1102,7 +1015,7 @@ zfs_create_boot() local zroot_vdevtype="$2" local zroot_vdevs= # Calculated below local swap_devs= # Calculated below - local boot_vdevs= # Used for geli(8) and/or MBR layouts + local boot_vdevs= # Used for geli(8) layouts shift 2 # poolname vdev_type local disks="$*" disk local isswapmirror @@ -1191,7 +1104,6 @@ zfs_create_boot() f_dprintf "$funcname: With 4K sectors..." f_eval_catch $funcname sysctl "$SYSCTL_ZFS_MIN_ASHIFT_12" \ || return $FAILURE - sysctl kern.geom.part.mbr.enforce_chs=0 fi local n=0 for disk in $disks; do @@ -1415,40 +1327,6 @@ zfs_create_boot() "bootfs=\"$zroot_name/$zroot_bootfs\"" "$zroot_name" || return $FAILURE - # MBR boot loader touch-up - if [ "$ZFSBOOT_PARTITION_SCHEME" = "MBR" ]; then - # Export the pool(s) - f_dprintf "$funcname: Temporarily exporting ZFS pool(s)..." - f_eval_catch $funcname zpool "$ZPOOL_EXPORT" "$zroot_name" || - return $FAILURE - if [ "$ZFSBOOT_BOOT_POOL" ]; then - f_eval_catch $funcname zpool "$ZPOOL_EXPORT" \ - "$bootpool_name" || return $FAILURE - fi - - f_dprintf "$funcname: Updating MBR boot loader on disks..." - # Stick the ZFS boot loader in the "convenient hole" after - # the ZFS internal metadata - for disk in $disks; do - f_eval_catch $funcname dd "$DD_WITH_OPTIONS" \ - /boot/zfsboot /dev/$disk$bootpart \ - "skip=1 seek=1024" || return $FAILURE - done - - # Re-import the ZFS pool(s) - f_dprintf "$funcname: Re-importing ZFS pool(s)..." - f_eval_catch $funcname zpool "$ZPOOL_IMPORT_WITH_OPTIONS" \ - "-o altroot=\"$BSDINSTALL_CHROOT\"" \ - "$zroot_name" || return $FAILURE - if [ "$ZFSBOOT_BOOT_POOL" ]; then - # Import the bootpool, but do not mount it yet - f_eval_catch $funcname zpool \ - "$ZPOOL_IMPORT_WITH_OPTIONS" \ - "-o altroot=\"$BSDINSTALL_CHROOT\" -N" \ - "$bootpool_name" || return $FAILURE - fi - fi - # Remount bootpool and create symlink(s) if [ "$ZFSBOOT_BOOT_POOL" ]; then f_eval_catch $funcname zfs "$ZFS_MOUNT" "$bootpool_name" || @@ -1793,7 +1671,7 @@ while :; do fi ;; ?" $msg_partition_scheme") - # Toggle between GPT (BIOS), GPT (UEFI) and MBR + # Toggle between partition schemes if [ "$ZFSBOOT_PARTITION_SCHEME" = "GPT" -a \ "$ZFSBOOT_BOOT_TYPE" = "BIOS" ] then @@ -1805,9 +1683,6 @@ while :; do ZFSBOOT_PARTITION_SCHEME="GPT" ZFSBOOT_BOOT_TYPE="BIOS+UEFI" elif [ "$ZFSBOOT_PARTITION_SCHEME" = "GPT" ]; then - ZFSBOOT_PARTITION_SCHEME="MBR" - ZFSBOOT_BOOT_TYPE="BIOS" - elif [ "$ZFSBOOT_PARTITION_SCHEME" = "MBR" ]; then ZFSBOOT_PARTITION_SCHEME="GPT + Active" ZFSBOOT_BOOT_TYPE="BIOS" elif [ "$ZFSBOOT_PARTITION_SCHEME" = "GPT + Active" ]; then |