diff options
Diffstat (limited to 'usr.sbin/makefs/tests/makefs_cd9660_tests.sh')
| -rw-r--r-- | usr.sbin/makefs/tests/makefs_cd9660_tests.sh | 508 |
1 files changed, 508 insertions, 0 deletions
diff --git a/usr.sbin/makefs/tests/makefs_cd9660_tests.sh b/usr.sbin/makefs/tests/makefs_cd9660_tests.sh new file mode 100644 index 000000000000..e058dfc57b7b --- /dev/null +++ b/usr.sbin/makefs/tests/makefs_cd9660_tests.sh @@ -0,0 +1,508 @@ +# +# Copyright 2015 EMC Corp. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# A note on specs: +# - A copy of the ISO-9660 spec can be found here: +# https://www.ecma-international.org/publications/files/ECMA-ST/Ecma-119.pdf +# - Any references to `rockridge` are referring to the `Rock Ridge` extensions +# of the ISO-9660 spec. A copy of the draft `IEEE-P1282` spec can be found +# here: +# http://www.ymi.com/ymi/sites/default/files/pdf/Rockridge.pdf + +MAKEFS="makefs -t cd9660" +MOUNT="mount_cd9660" + +. "$(dirname "$0")/makefs_tests_common.sh" + +common_cleanup() +{ + if ! test_md_device=$(cat $TEST_MD_DEVICE_FILE); then + echo "$TEST_MD_DEVICE_FILE could not be opened; has an md(4) device been attached?" + return + fi + + umount -f /dev/$test_md_device || : + mdconfig -d -u $test_md_device || : +} + +check_base_iso9660_image_contents() +{ + # Symlinks are treated like files when rockridge support isn't + # specified, and directories cannot contain a '.'. + check_image_contents "$@" -X c -X .g -X _g + + atf_check -e empty -o empty -s exit:0 test -L $TEST_INPUTS_DIR/c + atf_check -e empty -o empty -s exit:0 test -f $TEST_MOUNT_DIR/c +} + +check_cd9660_support() { + kldstat -m cd9660 || \ + atf_skip "Requires cd9660 filesystem support to be present in the kernel" +} + +atf_test_case D_flag cleanup +D_flag_body() +{ + atf_skip "makefs crashes with SIGBUS with dupe mtree entries; see FreeBSD bug # 192839" + + create_test_inputs + + atf_check -e empty -o save:$TEST_SPEC_FILE -s exit:0 \ + mtree -cp $TEST_INPUTS_DIR + atf_check -e empty -o not-empty -s exit:0 \ + $MAKEFS -F $TEST_SPEC_FILE -M 1m $TEST_IMAGE $TEST_INPUTS_DIR + + atf_check -e empty -o empty -s exit:0 \ + cp $TEST_SPEC_FILE spec2.mtree + atf_check -e empty -o save:dupe_$TEST_SPEC_FILE -s exit:0 \ + cat $TEST_SPEC_FILE spec2.mtree + + atf_check -e empty -o not-empty -s not-exit:0 \ + $MAKEFS -F dupe_$TEST_SPEC_FILE -M 1m $TEST_IMAGE $TEST_INPUTS_DIR + atf_check -e empty -o not-empty -s exit:0 \ + $MAKEFS -D -F dupe_$TEST_SPEC_FILE -M 1m $TEST_IMAGE $TEST_INPUTS_DIR +} +D_flag_cleanup() +{ + common_cleanup +} + +atf_test_case F_flag cleanup +F_flag_body() +{ + create_test_inputs + + atf_check -e empty -o save:$TEST_SPEC_FILE -s exit:0 \ + mtree -cp $TEST_INPUTS_DIR + + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS -F $TEST_SPEC_FILE -M 1m $TEST_IMAGE $TEST_INPUTS_DIR + + check_cd9660_support + mount_image + check_base_iso9660_image_contents +} +F_flag_cleanup() +{ + common_cleanup +} + +atf_test_case from_mtree_spec_file cleanup +from_mtree_spec_file_body() +{ + create_test_inputs + + atf_check -e empty -o save:$TEST_SPEC_FILE -s exit:0 \ + mtree -c -k "$DEFAULT_MTREE_KEYWORDS" -p $TEST_INPUTS_DIR + cd $TEST_INPUTS_DIR + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS $TEST_IMAGE $TEST_SPEC_FILE + cd - + + check_cd9660_support + mount_image + check_base_iso9660_image_contents +} +from_mtree_spec_file_cleanup() +{ + common_cleanup +} + +atf_test_case from_multiple_dirs cleanup +from_multiple_dirs_body() +{ + test_inputs_dir2=$TMPDIR/inputs2 + + create_test_inputs + + atf_check -e empty -o empty -s exit:0 mkdir -p $test_inputs_dir2 + atf_check -e empty -o empty -s exit:0 \ + touch $test_inputs_dir2/multiple_dirs_test_file + + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS $TEST_IMAGE $TEST_INPUTS_DIR $test_inputs_dir2 + + check_cd9660_support + mount_image + check_base_iso9660_image_contents -d $test_inputs_dir2 +} +from_multiple_dirs_cleanup() +{ + common_cleanup +} + +atf_test_case from_single_dir cleanup +from_single_dir_body() +{ + create_test_inputs + + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS $TEST_IMAGE $TEST_INPUTS_DIR + + check_cd9660_support + mount_image + check_base_iso9660_image_contents +} +from_single_dir_cleanup() +{ + common_cleanup +} + +atf_test_case o_flag_allow_deep_trees cleanup +o_flag_allow_deep_trees_body() +{ + create_test_inputs + + # Make sure the "more than 8 levels deep" requirement is met. + atf_check -e empty -o empty -s exit:0 \ + mkdir -p $TEST_INPUTS_DIR/a/b/c/d/e/f/g/h/i/j + + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS -o allow-deep-trees $TEST_IMAGE $TEST_INPUTS_DIR + + check_cd9660_support + mount_image + check_base_iso9660_image_contents +} +o_flag_allow_deep_trees_cleanup() +{ + common_cleanup +} + +atf_test_case o_flag_allow_max_name cleanup +o_flag_allow_max_name_body() +{ + atf_expect_fail "-o allow-max-name doesn't appear to be implemented on FreeBSD's copy of makefs [yet]" + + create_test_inputs + + long_path=$TEST_INPUTS_DIR/$(jot -s '' -b 0 37) + + # Make sure the "37 char name" limit requirement is met. + atf_check -e empty -o empty -s exit:0 touch $long_path + + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS -o allow-max-name $TEST_IMAGE $TEST_INPUTS_DIR + + check_cd9660_support + mount_image + check_base_iso9660_image_contents +} +o_flag_allow_max_name_cleanup() +{ + common_cleanup +} + +atf_test_case o_flag_isolevel_1 cleanup +o_flag_isolevel_1_body() +{ + atf_expect_fail "this testcase needs work; the filenames generated seem incorrect/corrupt" + + create_test_inputs + + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS -o isolevel=1 $TEST_IMAGE $TEST_INPUTS_DIR + + check_cd9660_support + mount_image + check_base_iso9660_image_contents +} +o_flag_isolevel_1_cleanup() +{ + common_cleanup +} + +atf_test_case o_flag_isolevel_2 cleanup +o_flag_isolevel_2_body() +{ + create_test_inputs + + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS -o isolevel=2 $TEST_IMAGE $TEST_INPUTS_DIR + + check_cd9660_support + mount_image + check_base_iso9660_image_contents +} +o_flag_isolevel_2_cleanup() +{ + common_cleanup +} + +atf_test_case o_flag_isolevel_3 cleanup +o_flag_isolevel_3_body() +{ + create_test_inputs + + # XXX: isolevel=3 isn't implemented yet. See FreeBSD bug # 203645 + if true; then + atf_check -e match:'makefs: ISO Level 3 is greater than 2\.' -o empty -s not-exit:0 \ + $MAKEFS -o isolevel=3 $TEST_IMAGE $TEST_INPUTS_DIR + else + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS -o isolevel=3 $TEST_IMAGE $TEST_INPUTS_DIR + + check_cd9660_support + mount_image + check_base_iso9660_image_contents + fi +} +o_flag_isolevel_3_cleanup() +{ + common_cleanup +} + +atf_test_case o_flag_preparer +o_flag_preparer_head() +{ + atf_set "require.progs" "strings" +} +o_flag_preparer_body() +{ + create_test_dirs + + preparer='My Very First ISO' + preparer_uppercase="$(echo $preparer | tr '[[:lower:]]' '[[:upper:]]')" + + atf_check -e empty -o empty -s exit:0 touch $TEST_INPUTS_DIR/dummy_file + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS -o preparer="$preparer" $TEST_IMAGE $TEST_INPUTS_DIR + atf_check -e empty -o match:"$preparer_uppercase" -s exit:0 \ + strings $TEST_IMAGE +} + +atf_test_case o_flag_publisher +o_flag_publisher_head() +{ + atf_set "require.progs" "strings" +} +o_flag_publisher_body() +{ + create_test_dirs + + publisher='My Super Awesome Publishing Company LTD' + publisher_uppercase="$(echo $publisher | tr '[[:lower:]]' '[[:upper:]]')" + + atf_check -e empty -o empty -s exit:0 touch $TEST_INPUTS_DIR/dummy_file + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS -o publisher="$publisher" $TEST_IMAGE $TEST_INPUTS_DIR + atf_check -e empty -o match:"$publisher_uppercase" -s exit:0 \ + strings $TEST_IMAGE +} + +atf_test_case o_flag_rockridge cleanup +o_flag_rockridge_body() +{ + create_test_dirs + + # Make sure the "more than 8 levels deep" requirement is met. + atf_check -e empty -o empty -s exit:0 \ + mkdir -p $TEST_INPUTS_DIR/a/b/c/d/e/f/g/h/i/j + + # Make sure the "pathname larger than 255 chars" requirement is met. + # + # $long_path's needs to be nested in a directory, as creating it + # outright as a 256 char filename via touch will fail with ENAMETOOLONG + long_path=$TEST_INPUTS_DIR/$(jot -s '/' -b "$(jot -s '' -b 0 64)" 4) + atf_check -e empty -o empty -s exit:0 mkdir -p "$(dirname $long_path)" + atf_check -e empty -o empty -s exit:0 touch "$long_path" + + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS -o rockridge $TEST_IMAGE $TEST_INPUTS_DIR + + check_cd9660_support + mount_image + check_image_contents -X .rr_moved + + # .rr_moved is a special directory created when you have deep directory + # trees with rock ridge extensions on + atf_check -e empty -o empty -s exit:0 \ + test -d $TEST_MOUNT_DIR/.rr_moved +} +o_flag_rockridge_cleanup() +{ + common_cleanup +} + +atf_test_case o_flag_rockridge_dev_nodes cleanup +o_flag_rockridge_dev_nodes_head() +{ + atf_set "descr" "Functional tests to ensure that dev nodes are handled properly with rockridge extensions (NetBSD kern/48852; FreeBSD bug 203648)" +} +o_flag_rockridge_dev_nodes_body() +{ + create_test_dirs + + (tar -cvf - -C /dev null && touch .tar_ok) | \ + atf_check -e not-empty -o empty -s exit:0 tar -xvf - -C "$TEST_INPUTS_DIR" + + atf_check -e empty -o empty -s exit:0 test -c $TEST_INPUTS_DIR/null + atf_check -e empty -o empty -s exit:0 test -f .tar_ok + + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS -o rockridge $TEST_IMAGE $TEST_INPUTS_DIR + + check_cd9660_support + mount_image + check_image_contents +} +o_flag_rockridge_dev_nodes_cleanup() +{ + common_cleanup +} + +atf_test_case T_flag_dir cleanup +T_flag_dir_body() +{ + timestamp=1742574909 + check_cd9660_support + create_test_dirs + + mkdir -p $TEST_INPUTS_DIR/dir1 + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS -T $timestamp -o rockridge $TEST_IMAGE $TEST_INPUTS_DIR + + mount_image + eval $(stat -s $TEST_MOUNT_DIR/dir1) + atf_check_equal $st_atime $timestamp + atf_check_equal $st_mtime $timestamp + atf_check_equal $st_ctime $timestamp +} + +T_flag_dir_cleanup() +{ + common_cleanup +} + +atf_test_case T_flag_F_flag cleanup +T_flag_F_flag_body() +{ + atf_expect_fail "-F doesn't take precedence over -T" + timestamp_F=1742574909 + timestamp_T=1742574910 + create_test_dirs + mkdir -p $TEST_INPUTS_DIR/dir1 + + atf_check -e empty -o save:$TEST_SPEC_FILE -s exit:0 \ + mtree -c -k "type,time" -p $TEST_INPUTS_DIR + change_mtree_timestamp $TEST_SPEC_FILE $timestamp_F + atf_check -e empty -o not-empty -s exit:0 \ + $MAKEFS -F $TEST_SPEC_FILE -T $timestamp_T -o rockridge $TEST_IMAGE $TEST_INPUTS_DIR + + mount_image + eval $(stat -s $TEST_MOUNT_DIR/dir1) + atf_check_equal $st_atime $timestamp_F + atf_check_equal $st_mtime $timestamp_F + atf_check_equal $st_ctime $timestamp_F +} + +T_flag_F_flag_cleanup() +{ + common_cleanup +} + +atf_test_case T_flag_mtree cleanup +T_flag_mtree_body() +{ + timestamp=1742574909 + create_test_dirs + mkdir -p $TEST_INPUTS_DIR/dir1 + + atf_check -e empty -o save:$TEST_SPEC_FILE -s exit:0 \ + mtree -c -k "type" -p $TEST_INPUTS_DIR + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS -T $timestamp -o rockridge $TEST_IMAGE $TEST_SPEC_FILE + + check_cd9660_support + mount_image + eval $(stat -s $TEST_MOUNT_DIR/dir1) + atf_check_equal $st_atime $timestamp + atf_check_equal $st_mtime $timestamp + atf_check_equal $st_ctime $timestamp +} + +T_flag_mtree_cleanup() +{ + common_cleanup +} + +atf_test_case duplicate_names cleanup +duplicate_names_head() +{ + atf_set "descr" "Ensure shortened directory names are unique (PR283238)" +} +duplicate_names_body() +{ + check_cd9660_support + create_test_dirs + + # Create three directories which are identical in the first 31 characters. + dir_prefix="this_directory_name_is_31_chars" + mkdir -p $TEST_INPUTS_DIR/${dir_prefix}1 + mkdir -p $TEST_INPUTS_DIR/${dir_prefix}2 + mkdir -p $TEST_INPUTS_DIR/${dir_prefix}3 + + atf_check -e empty -o empty -s exit:0 \ + $MAKEFS -o rockridge $TEST_IMAGE $TEST_INPUTS_DIR + + # Disable Rock Ridge extensions to read the plain ISO Level 2 names. + mount_image -r + + # The specific way the short names are made unique is not important. + # We verify only that there are three unique names and that the unique + # part is at the end of the name. + atf_check_equal $(ls -1 $TEST_MOUNT_DIR | sort | uniq | wc -l) 3 + atf_check_equal $(ls -1 $TEST_MOUNT_DIR | cut -c -29 | sort | uniq | wc -l) 1 +} +duplicate_names_cleanup() +{ + common_cleanup +} + +atf_init_test_cases() +{ + atf_add_test_case D_flag + atf_add_test_case F_flag + + atf_add_test_case from_mtree_spec_file + atf_add_test_case from_multiple_dirs + atf_add_test_case from_single_dir + + atf_add_test_case o_flag_allow_deep_trees + atf_add_test_case o_flag_allow_max_name + atf_add_test_case o_flag_isolevel_1 + atf_add_test_case o_flag_isolevel_2 + atf_add_test_case o_flag_isolevel_3 + atf_add_test_case o_flag_preparer + atf_add_test_case o_flag_publisher + atf_add_test_case o_flag_rockridge + atf_add_test_case o_flag_rockridge_dev_nodes + atf_add_test_case T_flag_dir + atf_add_test_case T_flag_F_flag + atf_add_test_case T_flag_mtree + + atf_add_test_case duplicate_names +} |