diff options
514 files changed, 20131 insertions, 2850 deletions
diff --git a/sys/gnu/dts/arm/am33xx-l4.dtsi b/sys/gnu/dts/arm/am33xx-l4.dtsi index 4e2986f0c604..5ed7f3c58c0f 100644 --- a/sys/gnu/dts/arm/am33xx-l4.dtsi +++ b/sys/gnu/dts/arm/am33xx-l4.dtsi @@ -759,12 +759,27 @@ ranges = <0x0 0x200000 0x80000>; }; - target-module@300000 { /* 0x4a300000, ap 9 04.0 */ - compatible = "ti,sysc"; - status = "disabled"; + pruss_tm: target-module@300000 { /* 0x4a300000, ap 9 04.0 */ + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x326000 0x4>, + <0x326004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_per 1>; + reset-names = "rstctrl"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x300000 0x80000>; + status = "disabled"; }; }; }; diff --git a/sys/gnu/dts/arm/am33xx.dtsi b/sys/gnu/dts/arm/am33xx.dtsi index 2b9ca5c609e5..f9bc73d099af 100644 --- a/sys/gnu/dts/arm/am33xx.dtsi +++ b/sys/gnu/dts/arm/am33xx.dtsi @@ -47,6 +47,7 @@ #size-cells = <0>; cpu@0 { compatible = "arm,cortex-a8"; + enable-method = "ti,am3352"; device_type = "cpu"; reg = <0>; @@ -56,6 +57,17 @@ clock-names = "cpu"; clock-latency = <300000>; /* From omap-cpufreq driver */ + cpu-idle-states = <&mpu_gate>; + }; + + idle-states { + mpu_gate: mpu_gate { + compatible = "arm,idle-state"; + entry-latency-us = <40>; + exit-latency-us = <90>; + min-residency-us = <300>; + ti,idle-wkup-m3; + }; }; }; @@ -193,45 +205,100 @@ reg = <0x48200000 0x1000>; }; - edma: edma@49000000 { - compatible = "ti,edma3-tpcc"; - ti,hwmods = "tpcc"; - reg = <0x49000000 0x10000>; - reg-names = "edma3_cc"; - interrupts = <12 13 14>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; - - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, - <&edma_tptc2 0>; - - ti,edma-memcpy-channels = <20 21>; + target-module@49000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49000000 0x4>; + reg-names = "rev"; + clocks = <&l3_clkctrl AM3_L3_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49000000 0x10000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x10000>; + reg-names = "edma3_cc"; + interrupts = <12 13 14>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 0>; + + ti,edma-memcpy-channels = <20 21>; + }; }; - edma_tptc0: tptc@49800000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc0"; - reg = <0x49800000 0x100000>; - interrupts = <112>; - interrupt-names = "edma3_tcerrint"; + target-module@49800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49800000 0x4>, + <0x49800010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM3_L3_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49800000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <112>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc1: tptc@49900000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc1"; - reg = <0x49900000 0x100000>; - interrupts = <113>; - interrupt-names = "edma3_tcerrint"; + target-module@49900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49900000 0x4>, + <0x49900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM3_L3_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49900000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <113>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc2: tptc@49a00000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc2"; - reg = <0x49a00000 0x100000>; - interrupts = <114>; - interrupt-names = "edma3_tcerrint"; + target-module@49a00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49a00000 0x4>, + <0x49a00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM3_L3_TPTC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49a00000 0x100000>; + + edma_tptc2: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <114>; + interrupt-names = "edma3_tcerrint"; + }; }; target-module@47810000 { diff --git a/sys/gnu/dts/arm/am4372.dtsi b/sys/gnu/dts/arm/am4372.dtsi index faa14dc0faff..dba87bfaf33e 100644 --- a/sys/gnu/dts/arm/am4372.dtsi +++ b/sys/gnu/dts/arm/am4372.dtsi @@ -45,6 +45,7 @@ #size-cells = <0>; cpu: cpu@0 { compatible = "arm,cortex-a9"; + enable-method = "ti,am4372"; device_type = "cpu"; reg = <0>; @@ -54,6 +55,17 @@ operating-points-v2 = <&cpu0_opp_table>; clock-latency = <300000>; /* From omap-cpufreq driver */ + cpu-idle-states = <&mpu_gate>; + }; + + idle-states { + mpu_gate: mpu_gate { + compatible = "arm,idle-state"; + entry-latency-us = <40>; + exit-latency-us = <100>; + min-residency-us = <300>; + local-timer-stop; + }; }; }; @@ -185,47 +197,102 @@ &pm_sram_data>; }; - edma: edma@49000000 { - compatible = "ti,edma3-tpcc"; - ti,hwmods = "tpcc"; - reg = <0x49000000 0x10000>; - reg-names = "edma3_cc"; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; - - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, - <&edma_tptc2 0>; - - ti,edma-memcpy-channels = <58 59>; + target-module@49000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49000000 0x4>; + reg-names = "rev"; + clocks = <&l3_clkctrl AM4_L3_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49000000 0x10000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x10000>; + reg-names = "edma3_cc"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 0>; + + ti,edma-memcpy-channels = <58 59>; + }; }; - edma_tptc0: tptc@49800000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc0"; - reg = <0x49800000 0x100000>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; + target-module@49800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49800000 0x4>, + <0x49800010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM4_L3_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49800000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc1: tptc@49900000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc1"; - reg = <0x49900000 0x100000>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; + target-module@49900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49900000 0x4>, + <0x49900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM4_L3_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49900000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc2: tptc@49a00000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc2"; - reg = <0x49a00000 0x100000>; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; + target-module@49a00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49a00000 0x4>, + <0x49a00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM4_L3_TPTC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49a00000 0x100000>; + + edma_tptc2: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; target-module@47810000 { @@ -344,6 +411,28 @@ }; }; + pruss_tm: target-module@54400000 { + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x54426000 0x4>, + <0x54426004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&pruss_ocp_clkctrl AM4_PRUSS_OCP_PRUSS_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_per 1>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x54400000 0x80000>; + }; + gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; @@ -394,38 +483,6 @@ }; }; - dss: dss@4832a000 { - compatible = "ti,omap3-dss"; - reg = <0x4832a000 0x200>; - status = "disabled"; - ti,hwmods = "dss_core"; - clocks = <&disp_clk>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dispc: dispc@4832a400 { - compatible = "ti,omap3-dispc"; - reg = <0x4832a400 0x400>; - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; - clocks = <&disp_clk>; - clock-names = "fck"; - - max-memory-bandwidth = <230000000>; - }; - - rfbi: rfbi@4832a800 { - compatible = "ti,omap3-rfbi"; - reg = <0x4832a800 0x100>; - ti,hwmods = "dss_rfbi"; - clocks = <&disp_clk>; - clock-names = "fck"; - status = "disabled"; - }; - }; - ocmcram: sram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x40000>; /* 256k */ diff --git a/sys/gnu/dts/arm/am437x-gp-evm.dts b/sys/gnu/dts/arm/am437x-gp-evm.dts index 811c8cae315b..d692e3b2812a 100644 --- a/sys/gnu/dts/arm/am437x-gp-evm.dts +++ b/sys/gnu/dts/arm/am437x-gp-evm.dts @@ -943,7 +943,7 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; }; &elm { diff --git a/sys/gnu/dts/arm/am437x-idk-evm.dts b/sys/gnu/dts/arm/am437x-idk-evm.dts index 9f66f96d09c9..a958f9ee4a5a 100644 --- a/sys/gnu/dts/arm/am437x-idk-evm.dts +++ b/sys/gnu/dts/arm/am437x-idk-evm.dts @@ -504,7 +504,7 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; }; &rtc { diff --git a/sys/gnu/dts/arm/am437x-l4.dtsi b/sys/gnu/dts/arm/am437x-l4.dtsi index e18e17d31272..49c6a872052e 100644 --- a/sys/gnu/dts/arm/am437x-l4.dtsi +++ b/sys/gnu/dts/arm/am437x-l4.dtsi @@ -2117,7 +2117,6 @@ target-module@2a000 { /* 0x4832a000, ap 88 3c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "dss_core"; reg = <0x2a000 0x4>, <0x2a010 0x4>, <0x2a014 0x4>; @@ -2135,6 +2134,82 @@ <0x00000800 0x0002a800 0x00000400>, <0x00000c00 0x0002ac00 0x00000400>, <0x00001000 0x0002b000 0x00001000>; + + dss: dss@0 { + compatible = "ti,omap3-dss"; + reg = <0 0x200>; + status = "disabled"; + clocks = <&disp_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00000400>, + <0x00000400 0x00000400 0x00000400>, + <0x00000800 0x00000800 0x00000400>, + <0x00000c00 0x00000c00 0x00000400>, + <0x00001000 0x00001000 0x00001000>; + + target-module@400 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x400 0x4>, + <0x410 0x4>, + <0x414 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x400 0x400>; + + dispc: dispc@0 { + compatible = "ti,omap3-dispc"; + reg = <0 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&disp_clk>; + clock-names = "fck"; + + max-memory-bandwidth = <230000000>; + }; + }; + + target-module@800 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x800 0x4>, + <0x810 0x4>, + <0x814 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x800 0x400>; + + rfbi: rfbi@0 { + compatible = "ti,omap3-rfbi"; + reg = <0 0x100>; + clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>; + clock-names = "fck"; + status = "disabled"; + }; + }; + }; }; target-module@3d000 { /* 0x4833d000, ap 102 6e.0 */ diff --git a/sys/gnu/dts/arm/am437x-sk-evm.dts b/sys/gnu/dts/arm/am437x-sk-evm.dts index 25222497f828..4d5a7ca2e25d 100644 --- a/sys/gnu/dts/arm/am437x-sk-evm.dts +++ b/sys/gnu/dts/arm/am437x-sk-evm.dts @@ -833,13 +833,13 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <2>; }; diff --git a/sys/gnu/dts/arm/am57-pruss.dtsi b/sys/gnu/dts/arm/am57-pruss.dtsi new file mode 100644 index 000000000000..b1c583dee10b --- /dev/null +++ b/sys/gnu/dts/arm/am57-pruss.dtsi @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ + * + * Common PRUSS data for TI AM57xx platforms + */ + +&ocp { + pruss1_tm: target-module@4b226000 { + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x4b226000 0x4>, + <0x4b226004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4b200000 0x80000>; + }; + + pruss2_tm: target-module@4b2a6000 { + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x4b2a6000 0x4>, + <0x4b2a6004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4b280000 0x80000>; + }; +}; diff --git a/sys/gnu/dts/arm/am5718.dtsi b/sys/gnu/dts/arm/am5718.dtsi index d51007c3e8c4..a80c2e3eee2e 100644 --- a/sys/gnu/dts/arm/am5718.dtsi +++ b/sys/gnu/dts/arm/am5718.dtsi @@ -4,6 +4,7 @@ */ #include "dra72x.dtsi" +#include "am57-pruss.dtsi" / { compatible = "ti,am5718", "ti,dra7"; diff --git a/sys/gnu/dts/arm/am571x-idk.dts b/sys/gnu/dts/arm/am571x-idk.dts index 669559c9c95b..c13756fa0f55 100644 --- a/sys/gnu/dts/arm/am571x-idk.dts +++ b/sys/gnu/dts/arm/am571x-idk.dts @@ -190,13 +190,13 @@ &cpsw_port1 { phy-handle = <ðphy0_sw>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; ti,dual-emac-pvid = <1>; }; &cpsw_port2 { phy-handle = <ðphy1_sw>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; ti,dual-emac-pvid = <2>; }; diff --git a/sys/gnu/dts/arm/am5728.dtsi b/sys/gnu/dts/arm/am5728.dtsi index 82e5427ef6a9..9a3810f5adcc 100644 --- a/sys/gnu/dts/arm/am5728.dtsi +++ b/sys/gnu/dts/arm/am5728.dtsi @@ -4,6 +4,7 @@ */ #include "dra74x.dtsi" +#include "am57-pruss.dtsi" / { compatible = "ti,am5728", "ti,dra7"; diff --git a/sys/gnu/dts/arm/am5748.dtsi b/sys/gnu/dts/arm/am5748.dtsi index 5e129759d04a..2b65317b1513 100644 --- a/sys/gnu/dts/arm/am5748.dtsi +++ b/sys/gnu/dts/arm/am5748.dtsi @@ -4,6 +4,7 @@ */ #include "dra76x.dtsi" +#include "am57-pruss.dtsi" / { compatible = "ti,am5748", "ti,dra762", "ti,dra7"; diff --git a/sys/gnu/dts/arm/am574x-idk.dts b/sys/gnu/dts/arm/am574x-idk.dts index fa0088025b2c..85c95cc551dd 100644 --- a/sys/gnu/dts/arm/am574x-idk.dts +++ b/sys/gnu/dts/arm/am574x-idk.dts @@ -40,3 +40,7 @@ status = "okay"; dual_emac; }; + +&m_can0 { + status = "disabled"; +}; diff --git a/sys/gnu/dts/arm/am57xx-beagle-x15-common.dtsi b/sys/gnu/dts/arm/am57xx-beagle-x15-common.dtsi index a813a0cf3ff3..565675354de4 100644 --- a/sys/gnu/dts/arm/am57xx-beagle-x15-common.dtsi +++ b/sys/gnu/dts/arm/am57xx-beagle-x15-common.dtsi @@ -433,13 +433,13 @@ &cpsw_emac0 { phy-handle = <&phy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <2>; }; diff --git a/sys/gnu/dts/arm/am57xx-idk-common.dtsi b/sys/gnu/dts/arm/am57xx-idk-common.dtsi index aa5e55f98179..a3ff1237d1fa 100644 --- a/sys/gnu/dts/arm/am57xx-idk-common.dtsi +++ b/sys/gnu/dts/arm/am57xx-idk-common.dtsi @@ -408,13 +408,13 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <2>; }; diff --git a/sys/gnu/dts/arm/arm-realview-pbx.dtsi b/sys/gnu/dts/arm/arm-realview-pbx.dtsi index 09f3f544f3a7..f61bd59ae5ba 100644 --- a/sys/gnu/dts/arm/arm-realview-pbx.dtsi +++ b/sys/gnu/dts/arm/arm-realview-pbx.dtsi @@ -210,7 +210,7 @@ }; }; - soc: soc@0 { + soc: soc { compatible = "arm,realview-pbx-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/sys/gnu/dts/arm/aspeed-g4.dtsi b/sys/gnu/dts/arm/aspeed-g4.dtsi index 807a0fc20670..8e04303e8514 100644 --- a/sys/gnu/dts/arm/aspeed-g4.dtsi +++ b/sys/gnu/dts/arm/aspeed-g4.dtsi @@ -164,6 +164,8 @@ reg = <0x1e6a0000 0x300>; interrupts = <5>; clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2d_default>; status = "disabled"; diff --git a/sys/gnu/dts/arm/aspeed-g5.dtsi b/sys/gnu/dts/arm/aspeed-g5.dtsi index ebec0fa8baa7..f12ec04d3cbc 100644 --- a/sys/gnu/dts/arm/aspeed-g5.dtsi +++ b/sys/gnu/dts/arm/aspeed-g5.dtsi @@ -195,6 +195,8 @@ reg = <0x1e6a0000 0x300>; interrupts = <5>; clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2ad_default>; status = "disabled"; diff --git a/sys/gnu/dts/arm/aspeed-g6-pinctrl.dtsi b/sys/gnu/dts/arm/aspeed-g6-pinctrl.dtsi index 045ce66ca876..7028e21bdd98 100644 --- a/sys/gnu/dts/arm/aspeed-g6-pinctrl.dtsi +++ b/sys/gnu/dts/arm/aspeed-g6-pinctrl.dtsi @@ -1112,6 +1112,31 @@ groups = "UART9"; }; + pinctrl_usb2ah_default: usb2ah_default { + function = "USB2AH"; + groups = "USBA"; + }; + + pinctrl_usb2ad_default: usb2ad_default { + function = "USB2AD"; + groups = "USBA"; + }; + + pinctrl_usb2bh_default: usb2bh_default { + function = "USB2BH"; + groups = "USBB"; + }; + + pinctrl_usb2bd_default: usb2bd_default { + function = "USB2BD"; + groups = "USBB"; + }; + + pinctrl_usb11bhid_default: usb11bhid_default { + function = "USB11BHID"; + groups = "USBB"; + }; + pinctrl_vb_default: vb_default { function = "VB"; groups = "VB"; diff --git a/sys/gnu/dts/arm/aspeed-g6.dtsi b/sys/gnu/dts/arm/aspeed-g6.dtsi index 796976d275e1..0a29b3b57a9d 100644 --- a/sys/gnu/dts/arm/aspeed-g6.dtsi +++ b/sys/gnu/dts/arm/aspeed-g6.dtsi @@ -245,6 +245,51 @@ status = "disabled"; }; + ehci0: usb@1e6a1000 { + compatible = "aspeed,ast2600-ehci", "generic-ehci"; + reg = <0x1e6a1000 0x100>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ah_default>; + status = "disabled"; + }; + + ehci1: usb@1e6a3000 { + compatible = "aspeed,ast2600-ehci", "generic-ehci"; + reg = <0x1e6a3000 0x100>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bh_default>; + status = "disabled"; + }; + + uhci: usb@1e6b0000 { + compatible = "aspeed,ast2600-uhci", "generic-uhci"; + reg = <0x1e6b0000 0x100>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #ports = <2>; + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; + status = "disabled"; + /* + * No default pinmux, it will follow EHCI, use an + * explicit pinmux override if EHCI is not enabled. + */ + }; + + vhub: usb-vhub@1e6a0000 { + compatible = "aspeed,ast2600-usb-vhub"; + reg = <0x1e6a0000 0x350>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <7>; + aspeed,vhub-generic-endpoints = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; diff --git a/sys/gnu/dts/arm/at91-dvk_su60_somc_lcm.dtsi b/sys/gnu/dts/arm/at91-dvk_su60_somc_lcm.dtsi index df0f0cc575c1..bea920b192b6 100644 --- a/sys/gnu/dts/arm/at91-dvk_su60_somc_lcm.dtsi +++ b/sys/gnu/dts/arm/at91-dvk_su60_somc_lcm.dtsi @@ -17,7 +17,7 @@ }; panel: panel { - compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92", "simple-panel"; + compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92"; backlight = <&backlight>; power-supply = <&vcc_lcd_reg>; #address-cells = <1>; diff --git a/sys/gnu/dts/arm/at91-sam9x60ek.dts b/sys/gnu/dts/arm/at91-sam9x60ek.dts index 9f30132d7d7b..b484745bf2d4 100644 --- a/sys/gnu/dts/arm/at91-sam9x60ek.dts +++ b/sys/gnu/dts/arm/at91-sam9x60ek.dts @@ -645,3 +645,8 @@ &usb2 { status = "okay"; }; + +&watchdog { + status = "okay"; +}; + diff --git a/sys/gnu/dts/arm/at91-sama5d27_wlsom1_ek.dts b/sys/gnu/dts/arm/at91-sama5d27_wlsom1_ek.dts index 0b9fa2942dff..6b8461278950 100644 --- a/sys/gnu/dts/arm/at91-sama5d27_wlsom1_ek.dts +++ b/sys/gnu/dts/arm/at91-sama5d27_wlsom1_ek.dts @@ -186,6 +186,11 @@ pinmux = <PIN_PA10__GPIO>; bias-disable; }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PA16__GPIO>; + bias-disable; + }; }; &pwm0 { @@ -248,6 +253,13 @@ status = "okay"; }; +&usb0 { + atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; +}; + &usb1 { num-ports = <3>; atmel,vbus-gpio = <0 diff --git a/sys/gnu/dts/arm/at91-sama5d2_ptc_ek.dts b/sys/gnu/dts/arm/at91-sama5d2_ptc_ek.dts index ba7f3e646c26..1c24ac8019ba 100644 --- a/sys/gnu/dts/arm/at91-sama5d2_ptc_ek.dts +++ b/sys/gnu/dts/arm/at91-sama5d2_ptc_ek.dts @@ -180,8 +180,11 @@ i2c0: i2c@f8028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -198,8 +201,11 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_flx0_default>; + pinctrl-1 = <&pinctrl_flx0_gpio>; + sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>; atmel,fifo-size = <16>; status = "okay"; }; @@ -226,8 +232,11 @@ i2c1: i2c@fc028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PC7 GPIO_ACTIVE_HIGH>; status = "okay"; at24@50 { @@ -244,18 +253,36 @@ bias-disable; }; + pinctrl_flx0_gpio: flx0_gpio { + pinmux = <PIN_PB28__GPIO>, + <PIN_PB29__GPIO>; + bias-disable; + }; + pinctrl_i2c0_default: i2c0_default { pinmux = <PIN_PD21__TWD0>, <PIN_PD22__TWCK0>; bias-disable; }; + pinctrl_i2c0_gpio: i2c0_gpio { + pinmux = <PIN_PD21__GPIO>, + <PIN_PD22__GPIO>; + bias-disable; + }; + pinctrl_i2c1_default: i2c1_default { pinmux = <PIN_PC6__TWD1>, <PIN_PC7__TWCK1>; bias-disable; }; + pinctrl_i2c1_gpio: i2c1_gpio { + pinmux = <PIN_PC6__GPIO>, + <PIN_PC7__GPIO>; + bias-disable; + }; + pinctrl_key_gpio_default: key_gpio_default { pinmux = <PIN_PA10__GPIO>; bias-pull-up; diff --git a/sys/gnu/dts/arm/at91-sama5d2_xplained.dts b/sys/gnu/dts/arm/at91-sama5d2_xplained.dts index 9d0a7fbea725..055ee53e4773 100644 --- a/sys/gnu/dts/arm/at91-sama5d2_xplained.dts +++ b/sys/gnu/dts/arm/at91-sama5d2_xplained.dts @@ -129,8 +129,11 @@ i2c0: i2c@f8028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>; i2c-sda-hold-time-ns = <350>; status = "okay"; @@ -331,8 +334,11 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_flx4_default>; + pinctrl-1 = <&pinctrl_flx4_gpio>; + sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>; atmel,fifo-size = <16>; i2c-analog-filter; i2c-digital-filter; @@ -343,11 +349,14 @@ i2c1: i2c@fc028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1_default>; i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD5 GPIO_ACTIVE_HIGH>; status = "okay"; at24@54 { @@ -441,18 +450,36 @@ bias-disable; }; + pinctrl_flx4_gpio: flx4_gpio { + pinmux = <PIN_PD12__GPIO>, + <PIN_PD13__GPIO>; + bias-disable; + }; + pinctrl_i2c0_default: i2c0_default { pinmux = <PIN_PD21__TWD0>, <PIN_PD22__TWCK0>; bias-disable; }; + pinctrl_i2c0_gpio: i2c0_gpio { + pinmux = <PIN_PD21__GPIO>, + <PIN_PD22__GPIO>; + bias-disable; + }; + pinctrl_i2c1_default: i2c1_default { pinmux = <PIN_PD4__TWD1>, <PIN_PD5__TWCK1>; bias-disable; }; + pinctrl_i2c1_gpio: i2c1_gpio { + pinmux = <PIN_PD4__GPIO>, + <PIN_PD5__GPIO>; + bias-disable; + }; + pinctrl_i2s0_default: i2s0_default { pinmux = <PIN_PC1__I2SC0_CK>, <PIN_PC2__I2SC0_MCK>, diff --git a/sys/gnu/dts/arm/at91-sama5d4_ma5d4evk.dts b/sys/gnu/dts/arm/at91-sama5d4_ma5d4evk.dts index af4969485c88..4d7cee569ff2 100644 --- a/sys/gnu/dts/arm/at91-sama5d4_ma5d4evk.dts +++ b/sys/gnu/dts/arm/at91-sama5d4_ma5d4evk.dts @@ -136,7 +136,7 @@ panel: panel { /* Actually Ampire 800480R2 */ - compatible = "foxlink,fl500wvr00-a0t", "simple-panel"; + compatible = "foxlink,fl500wvr00-a0t"; backlight = <&backlight>; #address-cells = <1>; #size-cells = <0>; diff --git a/sys/gnu/dts/arm/at91sam9n12ek.dts b/sys/gnu/dts/arm/at91sam9n12ek.dts index ea5cef0b0974..d36e162a8817 100644 --- a/sys/gnu/dts/arm/at91sam9n12ek.dts +++ b/sys/gnu/dts/arm/at91sam9n12ek.dts @@ -238,7 +238,7 @@ }; panel: panel { - compatible = "qiaodian,qd43003c0-40", "simple-panel"; + compatible = "qiaodian,qd43003c0-40"; backlight = <&backlight>; power-supply = <&panel_reg>; #address-cells = <1>; diff --git a/sys/gnu/dts/arm/at91sam9x5dm.dtsi b/sys/gnu/dts/arm/at91sam9x5dm.dtsi index 7f00c1f57b90..a9278038af3b 100644 --- a/sys/gnu/dts/arm/at91sam9x5dm.dtsi +++ b/sys/gnu/dts/arm/at91sam9x5dm.dtsi @@ -27,7 +27,7 @@ }; panel: panel { - compatible = "foxlink,fl500wvr00-a0t", "simple-panel"; + compatible = "foxlink,fl500wvr00-a0t"; backlight = <&backlight>; power-supply = <&panel_reg>; #address-cells = <1>; diff --git a/sys/gnu/dts/arm/bcm-hr2.dtsi b/sys/gnu/dts/arm/bcm-hr2.dtsi index 6142c672811e..5e5f5ca3c86f 100644 --- a/sys/gnu/dts/arm/bcm-hr2.dtsi +++ b/sys/gnu/dts/arm/bcm-hr2.dtsi @@ -75,7 +75,7 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; clocks = <&periph_clk>; }; @@ -83,7 +83,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x20600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_HIGH)>; + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; @@ -91,7 +91,7 @@ compatible = "arm,cortex-a9-twd-wdt"; reg = <0x20620 0x20>; interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_HIGH)>; + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; diff --git a/sys/gnu/dts/arm/bcm2711-rpi-4-b.dts b/sys/gnu/dts/arm/bcm2711-rpi-4-b.dts index efea891b1a76..e26ea9006378 100644 --- a/sys/gnu/dts/arm/bcm2711-rpi-4-b.dts +++ b/sys/gnu/dts/arm/bcm2711-rpi-4-b.dts @@ -20,6 +20,7 @@ }; aliases { + emmc2bus = &emmc2bus; ethernet0 = &genet; pcie0 = &pcie0; }; @@ -74,6 +75,79 @@ }; }; +&gpio { + /* + * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "RGMII_MDIO", + "RGMIO_MDC", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + /* Shared with SPI flash */ + "PWM0_MISO", + "PWM1_MOSI", + "STATUS_LED_G_CLK", + "SPIFLASH_CE_N", + "SDA0", + "SCL0", + "RGMII_RXCLK", + "RGMII_RXCTL", + "RGMII_RXD0", + "RGMII_RXD1", + "RGMII_RXD2", + "RGMII_RXD3", + "RGMII_TXCLK", + "RGMII_TXCTL", + "RGMII_TXD0", + "RGMII_TXD1", + "RGMII_TXD2", + "RGMII_TXD3"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; diff --git a/sys/gnu/dts/arm/bcm2711.dtsi b/sys/gnu/dts/arm/bcm2711.dtsi index d1e684d0acfd..a91cf68e3c4c 100644 --- a/sys/gnu/dts/arm/bcm2711.dtsi +++ b/sys/gnu/dts/arm/bcm2711.dtsi @@ -241,17 +241,32 @@ status = "disabled"; }; + hvs@7e400000 { + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + /* + * emmc2 has different DMA constraints based on SoC revisions. It was + * moved into its own bus, so as for RPi4's firmware to update them. + * The firmware will find whether the emmc2bus alias is defined, and if + * so, it'll edit the dma-ranges property below accordingly. + */ + emmc2bus: emmc2bus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>; + dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>; + emmc2: emmc2@7e340000 { compatible = "brcm,bcm2711-emmc2"; - reg = <0x7e340000 0x100>; + reg = <0x0 0x7e340000 0x100>; interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clocks BCM2711_CLOCK_EMMC2>; status = "disabled"; }; - - hvs@7e400000 { - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - }; }; arm-pmu { diff --git a/sys/gnu/dts/arm/bcm2835-rpi-zero-w.dts b/sys/gnu/dts/arm/bcm2835-rpi-zero-w.dts index 4c3f606e5b8d..f65448c01e31 100644 --- a/sys/gnu/dts/arm/bcm2835-rpi-zero-w.dts +++ b/sys/gnu/dts/arm/bcm2835-rpi-zero-w.dts @@ -24,7 +24,7 @@ leds { act { - gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; }; diff --git a/sys/gnu/dts/arm/bcm2835-rpi.dtsi b/sys/gnu/dts/arm/bcm2835-rpi.dtsi index fd2c766e0f71..f7ae5a4530b8 100644 --- a/sys/gnu/dts/arm/bcm2835-rpi.dtsi +++ b/sys/gnu/dts/arm/bcm2835-rpi.dtsi @@ -14,6 +14,9 @@ soc { firmware: firmware { compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + mboxes = <&mailbox>; dma-ranges; }; diff --git a/sys/gnu/dts/arm/bcm283x.dtsi b/sys/gnu/dts/arm/bcm283x.dtsi index e1abe8c730ce..b83a864e2e8b 100644 --- a/sys/gnu/dts/arm/bcm283x.dtsi +++ b/sys/gnu/dts/arm/bcm283x.dtsi @@ -372,6 +372,7 @@ "dsi0_ddr2", "dsi0_ddr"; + status = "disabled"; }; aux: aux@7e215000 { diff --git a/sys/gnu/dts/arm/dm814x-clocks.dtsi b/sys/gnu/dts/arm/dm814x-clocks.dtsi index e5e4d0affefa..f7939f43413b 100644 --- a/sys/gnu/dts/arm/dm814x-clocks.dtsi +++ b/sys/gnu/dts/arm/dm814x-clocks.dtsi @@ -362,4 +362,18 @@ #clock-cells = <2>; }; }; + + alwon_ethernet_cm: alwon_ethernet_cm@15d4 { + compatible = "ti,omap4-cm"; + reg = <0x15d4 0x4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x15d4 0x4>; + + alwon_ethernet_clkctrl: clk@0 { + compatible = "ti,clkctrl"; + reg = <0 0x4>; + #clock-cells = <2>; + }; + }; }; diff --git a/sys/gnu/dts/arm/dm814x.dtsi b/sys/gnu/dts/arm/dm814x.dtsi index 95de9f214c14..c28ca0540f03 100644 --- a/sys/gnu/dts/arm/dm814x.dtsi +++ b/sys/gnu/dts/arm/dm814x.dtsi @@ -4,6 +4,8 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> +#include <dt-bindings/clock/dm814.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/dm814x.h> @@ -519,53 +521,123 @@ reg = <0x47810000 0x1000>; }; - edma: edma@49000000 { - compatible = "ti,edma3-tpcc"; - ti,hwmods = "tpcc"; - reg = <0x49000000 0x10000>; - reg-names = "edma3_cc"; - interrupts = <12 13 14>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; - - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, - <&edma_tptc2 3>, <&edma_tptc3 0>; - - ti,edma-memcpy-channels = <20 21>; + target-module@49000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49000000 0x4>; + reg-names = "rev"; + clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49000000 0x10000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x10000>; + reg-names = "edma3_cc"; + interrupts = <12 13 14>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 3>, <&edma_tptc3 0>; + + ti,edma-memcpy-channels = <20 21>; + }; }; - edma_tptc0: tptc@49800000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc0"; - reg = <0x49800000 0x100000>; - interrupts = <112>; - interrupt-names = "edma3_tcerrint"; + target-module@49800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49800000 0x4>, + <0x49800010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49800000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <112>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc1: tptc@49900000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc1"; - reg = <0x49900000 0x100000>; - interrupts = <113>; - interrupt-names = "edma3_tcerrint"; + target-module@49900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49900000 0x4>, + <0x49900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49900000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <113>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc2: tptc@49a00000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc2"; - reg = <0x49a00000 0x100000>; - interrupts = <114>; - interrupt-names = "edma3_tcerrint"; + target-module@49a00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49a00000 0x4>, + <0x49a00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49a00000 0x100000>; + + edma_tptc2: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <114>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc3: tptc@49b00000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc3"; - reg = <0x49b00000 0x100000>; - interrupts = <115>; - interrupt-names = "edma3_tcerrint"; + target-module@49b00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49b00000 0x4>, + <0x49b00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49b00000 0x100000>; + + edma_tptc3: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <115>; + interrupt-names = "edma3_tcerrint"; + }; }; /* See TRM "Table 1-318. L4HS Instance Summary" */ @@ -574,57 +646,73 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0x4a000000 0x1b4040>; - }; - /* REVISIT: Move to live under l4hs once driver is fixed */ - mac: ethernet@4a100000 { - compatible = "ti,cpsw"; - ti,hwmods = "cpgmac0"; - clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; - clock-names = "fck", "cpts"; - cpdma_channels = <8>; - ale_entries = <1024>; - bd_ram_size = <0x2000>; - mac_control = <0x20>; - slaves = <2>; - active_slave = <0>; - cpts_clock_mult = <0x80000000>; - cpts_clock_shift = <29>; - reg = <0x4a100000 0x800 - 0x4a100900 0x100>; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - /* - * c0_rx_thresh_pend - * c0_rx_pend - * c0_tx_pend - * c0_misc_pend - */ - interrupts = <40 41 42 43>; - ranges; - syscon = <&scm_conf>; - - davinci_mdio: mdio@4a100800 { - compatible = "ti,davinci_mdio"; + target-module@100000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x100900 0x4>, + <0x100908 0x4>, + <0x100904 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <0>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,syss-mask = <1>; + clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "davinci_mdio"; - bus_freq = <1000000>; - reg = <0x4a100800 0x100>; - }; - - cpsw_emac0: slave@4a100200 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 1>; + #size-cells = <1>; + ranges = <0 0x100000 0x8000>; + + mac: ethernet@0 { + compatible = "ti,cpsw"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0 0x800>, + <0x900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + /* + * c0_rx_thresh_pend + * c0_rx_pend + * c0_tx_pend + * c0_misc_pend + */ + interrupts = <40 41 42 43>; + ranges = <0 0 0x8000>; + syscon = <&scm_conf>; + + davinci_mdio: mdio@800 { + compatible = "ti,cpsw-mdio", "ti,davinci_mdio"; + clocks = <&cpsw_125mhz_gclk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + reg = <0x800 0x100>; + }; - }; + cpsw_emac0: slave@200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1>; + }; - cpsw_emac1: slave@4a100300 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 2>; + cpsw_emac1: slave@300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2>; + }; + }; }; }; diff --git a/sys/gnu/dts/arm/dm816x.dtsi b/sys/gnu/dts/arm/dm816x.dtsi index 1edc2b48b254..2a4934b60ded 100644 --- a/sys/gnu/dts/arm/dm816x.dtsi +++ b/sys/gnu/dts/arm/dm816x.dtsi @@ -4,6 +4,8 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> +#include <dt-bindings/clock/dm816.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/omap.h> @@ -138,13 +140,123 @@ }; }; - edma: edma@49000000 { - compatible = "ti,edma3"; - ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3"; - reg = <0x49000000 0x10000>, - <0x44e10f90 0x40>; - interrupts = <12 13 14>; - #dma-cells = <1>; + target-module@49000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49000000 0x4>; + reg-names = "rev"; + clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49000000 0x10000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x10000>; + reg-names = "edma3_cc"; + interrupts = <12 13 14>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 3>, <&edma_tptc3 0>; + + ti,edma-memcpy-channels = <20 21>; + }; + }; + + target-module@49800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49800000 0x4>, + <0x49800010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49800000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <112>; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@49900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49900000 0x4>, + <0x49900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49900000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <113>; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@49a00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49a00000 0x4>, + <0x49a00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49a00000 0x100000>; + + edma_tptc2: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <114>; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@49b00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49b00000 0x4>, + <0x49b00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49b00000 0x100000>; + + edma_tptc3: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <115>; + interrupt-names = "edma3_tcerrint"; + }; }; elm: elm@48080000 { @@ -185,7 +297,7 @@ #address-cells = <2>; #size-cells = <1>; interrupts = <100>; - dmas = <&edma 52>; + dmas = <&edma 52 0>; dma-names = "rxtx"; gpmc,num-cs = <6>; gpmc,num-waitpins = <2>; @@ -202,7 +314,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <70>; - dmas = <&edma 58 &edma 59>; + dmas = <&edma 58 0 &edma 59 0>; dma-names = "tx", "rx"; }; @@ -213,7 +325,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <71>; - dmas = <&edma 60 &edma 61>; + dmas = <&edma 60 0 &edma 61 0>; dma-names = "tx", "rx"; }; @@ -311,10 +423,10 @@ interrupts = <65>; ti,spi-num-cs = <4>; ti,hwmods = "mcspi1"; - dmas = <&edma 16 &edma 17 - &edma 18 &edma 19 - &edma 20 &edma 21 - &edma 22 &edma 23>; + dmas = <&edma 16 0 &edma 17 0 + &edma 18 0 &edma 19 0 + &edma 20 0 &edma 21 0 + &edma 22 0 &edma 23 0>; dma-names = "tx0", "rx0", "tx1", "rx1", "tx2", "rx2", "tx3", "rx3"; }; @@ -324,7 +436,7 @@ reg = <0x48060000 0x11000>; ti,hwmods = "mmc1"; interrupts = <64>; - dmas = <&edma 24 &edma 25>; + dmas = <&edma 24 0 &edma 25 0>; dma-names = "tx", "rx"; }; @@ -392,7 +504,7 @@ reg = <0x48020000 0x2000>; clock-frequency = <48000000>; interrupts = <72>; - dmas = <&edma 26 &edma 27>; + dmas = <&edma 26 0 &edma 27 0>; dma-names = "tx", "rx"; }; @@ -402,7 +514,7 @@ reg = <0x48022000 0x2000>; clock-frequency = <48000000>; interrupts = <73>; - dmas = <&edma 28 &edma 29>; + dmas = <&edma 28 0 &edma 29 0>; dma-names = "tx", "rx"; }; @@ -412,7 +524,7 @@ reg = <0x48024000 0x2000>; clock-frequency = <48000000>; interrupts = <74>; - dmas = <&edma 30 &edma 31>; + dmas = <&edma 30 0 &edma 31 0>; dma-names = "tx", "rx"; }; diff --git a/sys/gnu/dts/arm/dra62x.dtsi b/sys/gnu/dts/arm/dra62x.dtsi index d3cbb4ea35a8..cc4878aaa8ea 100644 --- a/sys/gnu/dts/arm/dra62x.dtsi +++ b/sys/gnu/dts/arm/dra62x.dtsi @@ -12,12 +12,12 @@ /* Compared to dm814x, dra62x has different offsets for Ethernet */ &mac { - reg = <0x4a100000 0x800 - 0x4a101200 0x100>; + reg = <0 0x800>, + <0x1200 0x100>; }; &davinci_mdio { - reg = <0x4a101000 0x100>; + reg = <0x1000 0x100>; }; #include "dra62x-clocks.dtsi" diff --git a/sys/gnu/dts/arm/dra7.dtsi b/sys/gnu/dts/arm/dra7.dtsi index 5f5ee16f07a3..7191ee6a1b82 100644 --- a/sys/gnu/dts/arm/dra7.dtsi +++ b/sys/gnu/dts/arm/dra7.dtsi @@ -143,7 +143,7 @@ * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ - ocp { + ocp: ocp { compatible = "ti,dra7-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -172,6 +172,7 @@ #address-cells = <1>; ranges = <0x51000000 0x51000000 0x3000 0x0 0x20000000 0x10000000>; + dma-ranges; /** * To enable PCI endpoint mode, disable the pcie1_rc * node and enable pcie1_ep mode. @@ -185,7 +186,6 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x20013000 0x13000 0 0xffed000>; - dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; @@ -230,6 +230,7 @@ #address-cells = <1>; ranges = <0x51800000 0x51800000 0x3000 0x0 0x30000000 0x10000000>; + dma-ranges; status = "disabled"; pcie2_rc: pcie@51800000 { reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; @@ -240,7 +241,6 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x30013000 0x13000 0 0xffed000>; - dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; @@ -334,43 +334,73 @@ #pinctrl-cells = <2>; }; - edma: edma@43300000 { - compatible = "ti,edma3-tpcc"; - ti,hwmods = "tpcc"; - reg = <0x43300000 0x100000>; - reg-names = "edma3_cc"; - interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; + target-module@43300000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x43300000 0x4>; + reg-names = "rev"; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43300000 0x100000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x100000>; + reg-names = "edma3_cc"; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>; + + /* + * memcpy is disabled, can be enabled with: + * ti,edma-memcpy-channels = <20 21>; + * for example. Note that these channels need to be + * masked in the xbar as well. + */ + }; + }; - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>; + target-module@43400000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x43400000 0x4>; + reg-names = "rev"; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43400000 0x100000>; - /* - * memcpy is disabled, can be enabled with: - * ti,edma-memcpy-channels = <20 21>; - * for example. Note that these channels need to be - * masked in the xbar as well. - */ + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc0: tptc@43400000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc0"; - reg = <0x43400000 0x100000>; - interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; - }; + target-module@43500000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x43500000 0x4>; + reg-names = "rev"; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43500000 0x100000>; - edma_tptc1: tptc@43500000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc1"; - reg = <0x43500000 0x100000>; - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; dmm@4e000000 { @@ -708,44 +738,99 @@ ti,irqs-safe-map = <0>; }; - dss: dss@58000000 { - compatible = "ti,dra7-dss"; - /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */ - /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */ - status = "disabled"; - ti,hwmods = "dss_core"; - /* CTRL_CORE_DSS_PLL_CONTROL */ - syscon-pll-ctrl = <&scm_conf 0x538>; + target-module@58000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58000000 4>, + <0x58000014 4>; + reg-names = "rev", "syss"; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>; + clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; #address-cells = <1>; #size-cells = <1>; - ranges; - - dispc@58001000 { - compatible = "ti,dra7-dispc"; - reg = <0x58001000 0x1000>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; - clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; - /* CTRL_CORE_SMA_SW_1 */ - syscon-pol = <&scm_conf 0x534>; - }; + ranges = <0 0x58000000 0x800000>; - hdmi: encoder@58060000 { - compatible = "ti,dra7-hdmi"; - reg = <0x58040000 0x200>, - <0x58040200 0x80>, - <0x58040300 0x80>, - <0x58060000 0x19000>; - reg-names = "wp", "pll", "phy", "core"; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + dss: dss@0 { + compatible = "ti,dra7-dss"; + /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */ + /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */ status = "disabled"; - ti,hwmods = "dss_hdmi"; - clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>, - <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - dmas = <&sdma_xbar 76>; - dma-names = "audio_tx"; + /* CTRL_CORE_DSS_PLL_CONTROL */ + syscon-pll-ctrl = <&scm_conf 0x538>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x800000>; + + target-module@1000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x1000 0x4>, + <0x1010 0x4>, + <0x1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x1000>; + + dispc@0 { + compatible = "ti,dra7-dispc"; + reg = <0 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + /* CTRL_CORE_SMA_SW_1 */ + syscon-pol = <&scm_conf 0x534>; + }; + }; + + target-module@40000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x40000 0x4>, + <0x40010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; + clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>; + clock-names = "fck", "dss_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000 0x40000>; + + hdmi: encoder@0 { + compatible = "ti,dra7-hdmi"; + reg = <0 0x200>, + <0x200 0x80>, + <0x300 0x80>, + <0x20000 0x19000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma_xbar 76>; + dma-names = "audio_tx"; + }; + }; }; }; diff --git a/sys/gnu/dts/arm/dra72x.dtsi b/sys/gnu/dts/arm/dra72x.dtsi index 82b57a35abc0..da334489b18f 100644 --- a/sys/gnu/dts/arm/dra72x.dtsi +++ b/sys/gnu/dts/arm/dra72x.dtsi @@ -60,9 +60,9 @@ }; &dss { - reg = <0x58000000 0x80>, - <0x58004054 0x4>, - <0x58004300 0x20>; + reg = <0 0x80>, + <0x4054 0x4>, + <0x4300 0x20>; reg-names = "dss", "pll1_clkctrl", "pll1"; clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>, diff --git a/sys/gnu/dts/arm/dra74x.dtsi b/sys/gnu/dts/arm/dra74x.dtsi index c5abc436ca1f..7b1c61298253 100644 --- a/sys/gnu/dts/arm/dra74x.dtsi +++ b/sys/gnu/dts/arm/dra74x.dtsi @@ -132,11 +132,11 @@ }; &dss { - reg = <0x58000000 0x80>, - <0x58004054 0x4>, - <0x58004300 0x20>, - <0x58009054 0x4>, - <0x58009300 0x20>; + reg = <0 0x80>, + <0x4054 0x4>, + <0x4300 0x20>, + <0x9054 0x4>, + <0x9300 0x20>; reg-names = "dss", "pll1_clkctrl", "pll1", "pll2_clkctrl", "pll2"; diff --git a/sys/gnu/dts/arm/ecx-2000.dts b/sys/gnu/dts/arm/ecx-2000.dts index 5651ae6dc969..f6eb71553b95 100644 --- a/sys/gnu/dts/arm/ecx-2000.dts +++ b/sys/gnu/dts/arm/ecx-2000.dts @@ -13,7 +13,6 @@ compatible = "calxeda,ecx-2000"; #address-cells = <2>; #size-cells = <2>; - clock-ranges; cpus { #address-cells = <1>; @@ -83,8 +82,7 @@ intc: interrupt-controller@fff11000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; - #size-cells = <0>; - #address-cells = <1>; + #address-cells = <0>; interrupt-controller; interrupts = <1 9 0xf04>; reg = <0xfff11000 0x1000>, @@ -95,7 +93,7 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; + interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>; }; }; }; diff --git a/sys/gnu/dts/arm/ecx-common.dtsi b/sys/gnu/dts/arm/ecx-common.dtsi index 66ee1d34f72b..57a028a69373 100644 --- a/sys/gnu/dts/arm/ecx-common.dtsi +++ b/sys/gnu/dts/arm/ecx-common.dtsi @@ -27,10 +27,11 @@ reg = <0xffe08000 0x10000>; interrupts = <0 83 4>; dma-coherent; - calxeda,port-phys = <&combophy5 0 &combophy0 0 - &combophy0 1 &combophy0 2 - &combophy0 3>; - calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>; + calxeda,port-phys = < &combophy5 0>, <&combophy0 0>, + <&combophy0 1>, <&combophy0 2>, + <&combophy0 3>; + calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>, + <&gpioh 7 1>; calxeda,led-order = <4 0 1 2 3>; }; @@ -114,8 +115,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xfff36000 0x1000>; interrupts = <0 20 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; + clocks = <&pclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; smic@fff3a000 { @@ -202,14 +203,14 @@ ethernet@fff50000 { compatible = "calxeda,hb-xgmac"; reg = <0xfff50000 0x1000>; - interrupts = <0 77 4 0 78 4 0 79 4>; + interrupts = <0 77 4>, <0 78 4>, <0 79 4>; dma-coherent; }; ethernet@fff51000 { compatible = "calxeda,hb-xgmac"; reg = <0xfff51000 0x1000>; - interrupts = <0 80 4 0 81 4 0 82 4>; + interrupts = <0 80 4>, <0 81 4>, <0 82 4>; dma-coherent; }; diff --git a/sys/gnu/dts/arm/exynos3250-artik5.dtsi b/sys/gnu/dts/arm/exynos3250-artik5.dtsi index dee35e3a5c4b..b27a82072365 100644 --- a/sys/gnu/dts/arm/exynos3250-artik5.dtsi +++ b/sys/gnu/dts/arm/exynos3250-artik5.dtsi @@ -23,7 +23,7 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x1ff00000>; + reg = <0x40000000 0x1f800000>; }; firmware@205f000 { diff --git a/sys/gnu/dts/arm/exynos4210-universal_c210.dts b/sys/gnu/dts/arm/exynos4210-universal_c210.dts index a1bdf7830a87..9dda6bdb9253 100644 --- a/sys/gnu/dts/arm/exynos4210-universal_c210.dts +++ b/sys/gnu/dts/arm/exynos4210-universal_c210.dts @@ -115,7 +115,7 @@ gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; - cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>; lcd@0 { compatible = "samsung,ld9040"; @@ -124,8 +124,6 @@ vci-supply = <&ldo17_reg>; reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; spi-max-frequency = <1200000>; - spi-cpol; - spi-cpha; power-on-delay = <10>; reset-delay = <10>; panel-width-mm = <90>; diff --git a/sys/gnu/dts/arm/exynos4412-odroid-common.dtsi b/sys/gnu/dts/arm/exynos4412-odroid-common.dtsi index 9c39e82e4ecb..73d6a71da88d 100644 --- a/sys/gnu/dts/arm/exynos4412-odroid-common.dtsi +++ b/sys/gnu/dts/arm/exynos4412-odroid-common.dtsi @@ -165,6 +165,15 @@ cpu0-supply = <&buck2_reg>; }; +&cpu0_opp_table { + opp-1000000000 { + opp-suspend; + }; + opp-800000000 { + /delete-property/opp-suspend; + }; +}; + &pinctrl_1 { gpio_power_key: power_key { samsung,pins = "gpx1-3"; diff --git a/sys/gnu/dts/arm/exynos5250-arndale.dts b/sys/gnu/dts/arm/exynos5250-arndale.dts index f8ebc620f42d..6904091d4837 100644 --- a/sys/gnu/dts/arm/exynos5250-arndale.dts +++ b/sys/gnu/dts/arm/exynos5250-arndale.dts @@ -93,22 +93,23 @@ compatible = "regulator-fixed"; reg = <0>; regulator-name = "MAIN_DC"; + regulator-always-on; }; mmc_reg: regulator@1 { compatible = "regulator-fixed"; reg = <1>; - regulator-name = "VDD_33ON_2.8V"; + regulator-name = "VDD_MMC"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-always-on; }; reg_hdmi_en: regulator@2 { compatible = "regulator-fixed"; reg = <2>; regulator-name = "hdmi-en"; + regulator-always-on; }; vcc_1v2_reg: regulator@3 { @@ -117,6 +118,7 @@ regulator-name = "VCC_1V2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-always-on; }; vcc_1v8_reg: regulator@4 { @@ -125,6 +127,7 @@ regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; vcc_3v3_reg: regulator@5 { @@ -133,6 +136,7 @@ regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; }; diff --git a/sys/gnu/dts/arm/exynos5420-arndale-octa.dts b/sys/gnu/dts/arm/exynos5420-arndale-octa.dts index ee28d30f5476..e9a09dd0a49b 100644 --- a/sys/gnu/dts/arm/exynos5420-arndale-octa.dts +++ b/sys/gnu/dts/arm/exynos5420-arndale-octa.dts @@ -584,6 +584,7 @@ regulator-name = "PVDD_G3DS_1V0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1100000>; + regulator-always-on; regulator-state-mem { regulator-on-in-suspend; @@ -697,6 +698,7 @@ regulator-name = "PVDD_G3D_1V0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; + regulator-always-on; regulator-state-mem { regulator-off-in-suspend; diff --git a/sys/gnu/dts/arm/exynos5422-cpus.dtsi b/sys/gnu/dts/arm/exynos5422-cpus.dtsi index 1b8605cf2407..4b641b9b8179 100644 --- a/sys/gnu/dts/arm/exynos5422-cpus.dtsi +++ b/sys/gnu/dts/arm/exynos5422-cpus.dtsi @@ -31,6 +31,7 @@ operating-points-v2 = <&cluster_a7_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; + dynamic-power-coefficient = <90>; }; cpu1: cpu@101 { @@ -43,6 +44,7 @@ operating-points-v2 = <&cluster_a7_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; + dynamic-power-coefficient = <90>; }; cpu2: cpu@102 { @@ -55,6 +57,7 @@ operating-points-v2 = <&cluster_a7_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; + dynamic-power-coefficient = <90>; }; cpu3: cpu@103 { @@ -67,6 +70,7 @@ operating-points-v2 = <&cluster_a7_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; + dynamic-power-coefficient = <90>; }; cpu4: cpu@0 { @@ -79,6 +83,7 @@ operating-points-v2 = <&cluster_a15_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <310>; }; cpu5: cpu@1 { @@ -91,6 +96,7 @@ operating-points-v2 = <&cluster_a15_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <310>; }; cpu6: cpu@2 { @@ -103,6 +109,7 @@ operating-points-v2 = <&cluster_a15_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <310>; }; cpu7: cpu@3 { @@ -115,6 +122,7 @@ operating-points-v2 = <&cluster_a15_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <310>; }; }; }; diff --git a/sys/gnu/dts/arm/exynos5422-odroid-core.dtsi b/sys/gnu/dts/arm/exynos5422-odroid-core.dtsi index 5cf1aed20490..ab27ff8bc3dc 100644 --- a/sys/gnu/dts/arm/exynos5422-odroid-core.dtsi +++ b/sys/gnu/dts/arm/exynos5422-odroid-core.dtsi @@ -901,6 +901,7 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; regulator-boot-on; + regulator-always-on; regulator-state-mem { regulator-off-in-suspend; diff --git a/sys/gnu/dts/arm/exynos5422-odroidhc1.dts b/sys/gnu/dts/arm/exynos5422-odroidhc1.dts index f163206265bb..812659260278 100644 --- a/sys/gnu/dts/arm/exynos5422-odroidhc1.dts +++ b/sys/gnu/dts/arm/exynos5422-odroidhc1.dts @@ -215,6 +215,36 @@ }; }; }; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu 0>; + trips { + gpu_alert0: gpu-alert-0 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + gpu_alert1: gpu-alert-1 { + temperature = <85000>; + hysteresis = <10000>; + type = "active"; + }; + gpu_crit0: gpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu 0 2>; + }; + map1 { + trip = <&gpu_alert1>; + cooling-device = <&gpu 3 6>; + }; + }; + }; }; }; diff --git a/sys/gnu/dts/arm/exynos5422-odroidxu3-common.dtsi b/sys/gnu/dts/arm/exynos5422-odroidxu3-common.dtsi index 1865a708b49f..5da2d81e3be2 100644 --- a/sys/gnu/dts/arm/exynos5422-odroidxu3-common.dtsi +++ b/sys/gnu/dts/arm/exynos5422-odroidxu3-common.dtsi @@ -357,6 +357,65 @@ }; }; }; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + gpu_alert0: gpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + gpu_alert1: gpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + gpu_alert2: gpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + gpu_crit0: gpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + gpu_alert3: gpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + gpu_alert4: gpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&gpu_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&gpu_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&gpu_alert3>; + cooling-device = <&gpu 0 2>; + }; + map4 { + trip = <&gpu_alert4>; + cooling-device = <&gpu 3 6>; + }; + }; + }; }; }; diff --git a/sys/gnu/dts/arm/gemini-dlink-dir-685.dts b/sys/gnu/dts/arm/gemini-dlink-dir-685.dts index e2030ba16512..cc39289e99dd 100644 --- a/sys/gnu/dts/arm/gemini-dlink-dir-685.dts +++ b/sys/gnu/dts/arm/gemini-dlink-dir-685.dts @@ -119,13 +119,11 @@ /* * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM. - * Since the platform has no temperature sensor, this is controlled - * from userspace by using the hard disks S.M.A.R.T. temperature * sensor. It is turned on when the temperature exceeds 46 degrees * and turned off when the temperatures goes below 41 degrees * (celsius). */ - gpio-fan { + fan0: gpio-fan { compatible = "gpio-fan"; /* Collides with IDE */ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; @@ -133,6 +131,40 @@ #cooling-cells = <2>; }; + thermal-zones { + chassis-thermal { + /* Poll every 20 seconds */ + polling-delay = <20000>; + /* Poll every 2nd second when cooling */ + polling-delay-passive = <2000>; + /* Use the thermal sensor in the hard drive */ + thermal-sensors = <&drive0>; + + /* Tripping points from the fan.script in the rootfs */ + trips { + alert: chassis-alert { + /* At 43 degrees turn on the fan */ + temperature = <43000>; + hysteresis = <3000>; + type = "active"; + }; + crit: chassis-crit { + /* Just shut down at 60 degrees */ + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&alert>; + cooling-device = <&fan0 1 1>; + }; + }; + }; + }; + /* * The touchpad input is connected to a GPIO bit-banged * I2C bus. @@ -443,8 +475,18 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; + + /* + * This drive may have a temperature sensor with a + * thermal zone we can use for thermal control of the + * chassis temperature using the fan. + */ + drive0: ide-port@0 { + reg = <0>; + #thermal-sensor-cells = <0>; + }; }; display-controller@6a000000 { diff --git a/sys/gnu/dts/arm/gemini-dlink-dns-313.dts b/sys/gnu/dts/arm/gemini-dlink-dns-313.dts index 360642a02a48..c6f3d90e3e90 100644 --- a/sys/gnu/dts/arm/gemini-dlink-dns-313.dts +++ b/sys/gnu/dts/arm/gemini-dlink-dns-313.dts @@ -297,7 +297,7 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; }; diff --git a/sys/gnu/dts/arm/gemini-nas4220b.dts b/sys/gnu/dts/arm/gemini-nas4220b.dts index 521714f38eed..43c45f7e1e0a 100644 --- a/sys/gnu/dts/arm/gemini-nas4220b.dts +++ b/sys/gnu/dts/arm/gemini-nas4220b.dts @@ -170,11 +170,11 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; - ata@63400000 { + ide@63400000 { status = "okay"; }; diff --git a/sys/gnu/dts/arm/gemini-sl93512r.dts b/sys/gnu/dts/arm/gemini-sl93512r.dts index a98af0351906..a0916d3c1059 100644 --- a/sys/gnu/dts/arm/gemini-sl93512r.dts +++ b/sys/gnu/dts/arm/gemini-sl93512r.dts @@ -293,11 +293,11 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; - ata@63400000 { + ide@63400000 { status = "okay"; }; diff --git a/sys/gnu/dts/arm/gemini-sq201.dts b/sys/gnu/dts/arm/gemini-sq201.dts index 239dfacaae4d..0c6e6d35bfaa 100644 --- a/sys/gnu/dts/arm/gemini-sq201.dts +++ b/sys/gnu/dts/arm/gemini-sq201.dts @@ -289,7 +289,7 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; diff --git a/sys/gnu/dts/arm/gemini.dtsi b/sys/gnu/dts/arm/gemini.dtsi index 8cf67b11751f..065ed10a79fa 100644 --- a/sys/gnu/dts/arm/gemini.dtsi +++ b/sys/gnu/dts/arm/gemini.dtsi @@ -356,7 +356,7 @@ }; }; - ata@63000000 { + ide@63000000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63000000 0x1000>; interrupts = <4 IRQ_TYPE_EDGE_RISING>; @@ -365,9 +365,11 @@ clock-names = "PCLK"; sata = <&sata>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; - ata@63400000 { + ide@63400000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63400000 0x1000>; interrupts = <5 IRQ_TYPE_EDGE_RISING>; @@ -376,6 +378,8 @@ clock-names = "PCLK"; sata = <&sata>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; dma-controller@67000000 { diff --git a/sys/gnu/dts/arm/highbank.dts b/sys/gnu/dts/arm/highbank.dts index f4e4dca6f7e7..b6b0225a769e 100644 --- a/sys/gnu/dts/arm/highbank.dts +++ b/sys/gnu/dts/arm/highbank.dts @@ -13,7 +13,6 @@ compatible = "calxeda,highbank"; #address-cells = <1>; #size-cells = <1>; - clock-ranges; cpus { #address-cells = <1>; @@ -96,7 +95,7 @@ }; }; - memory { + memory@0 { name = "memory"; device_type = "memory"; reg = <0x00000000 0xff900000>; @@ -128,14 +127,12 @@ intc: interrupt-controller@fff11000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #size-cells = <0>; - #address-cells = <1>; interrupt-controller; reg = <0xfff11000 0x1000>, <0xfff10100 0x100>; }; - L2: l2-cache { + L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xfff12000 0x1000>; interrupts = <0 70 4>; @@ -145,14 +142,14 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; + interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>; }; sregs@fff3c200 { compatible = "calxeda,hb-sregs-l2-ecc"; reg = <0xfff3c200 0x100>; - interrupts = <0 71 4 0 72 4>; + interrupts = <0 71 4>, <0 72 4>; }; }; diff --git a/sys/gnu/dts/arm/imx23-olinuxino.dts b/sys/gnu/dts/arm/imx23-olinuxino.dts index 4c9aafe00b5d..0729e72f2283 100644 --- a/sys/gnu/dts/arm/imx23-olinuxino.dts +++ b/sys/gnu/dts/arm/imx23-olinuxino.dts @@ -23,7 +23,7 @@ ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; bus-width = <4>; broken-cd; status = "okay"; diff --git a/sys/gnu/dts/arm/imx23.dtsi b/sys/gnu/dts/arm/imx23.dtsi index 8257630f7a49..c5edff381213 100644 --- a/sys/gnu/dts/arm/imx23.dtsi +++ b/sys/gnu/dts/arm/imx23.dtsi @@ -267,6 +267,14 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + mmc0_sck_cfg: mmc0-sck-cfg@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_SSP1_SCK__SSP1_SCK + >; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + mmc1_4bit_pins_a: mmc1-4bit@0 { reg = <0>; fsl,pinmux-ids = < @@ -422,7 +430,7 @@ clocks = <&clks 16>; }; - dcp@80028000 { + dcp: crypto@80028000 { compatible = "fsl,imx23-dcp"; reg = <0x80028000 0x2000>; interrupts = <53 54>; diff --git a/sys/gnu/dts/arm/imx25-pinfunc.h b/sys/gnu/dts/arm/imx25-pinfunc.h index f4516ccf2c1a..111bfdcbe552 100644 --- a/sys/gnu/dts/arm/imx25-pinfunc.h +++ b/sys/gnu/dts/arm/imx25-pinfunc.h @@ -82,6 +82,7 @@ #define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x00 0x000 #define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x04 0x000 #define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x05 0x000 +#define MX25_PAD_EB0__CSPI3_SS0 0x040 0x258 0x4bc 0x06 0x000 #define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x00 0x000 #define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x04 0x000 @@ -102,11 +103,13 @@ #define MX25_PAD_CS4__NF_CE1 0x054 0x264 0x000 0x01 0x000 #define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x03 0x000 #define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x05 0x000 +#define MX25_PAD_CS4__CSPI3_MOSI 0x054 0x264 0x4b8 0x06 0x000 #define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x00 0x000 #define MX25_PAD_CS5__NF_CE2 0x058 0x268 0x000 0x01 0x000 #define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x03 0x000 #define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x05 0x000 +#define MX25_PAD_CS5__CSPI3_MISO 0x058 0x268 0x4b4 0x06 0x000 #define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x00 0x000 #define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x05 0x000 @@ -114,6 +117,7 @@ #define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x00 0x000 #define MX25_PAD_ECB__UART5_TXD 0x060 0x270 0x000 0x03 0x000 #define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x05 0x000 +#define MX25_PAD_ECB__CSPI3_SCLK 0x060 0x270 0x4ac 0x06 0x000 #define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x00 0x000 #define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x03 0x000 @@ -251,10 +255,12 @@ #define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x00 0x000 #define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000 +#define MX25_PAD_LD12__KPP_ROW6 0x0f8 0x2f0 0x544 0x04 0x000 #define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x05 0x001 #define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x00 0x000 #define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000 +#define MX25_PAD_LD13__KPP_ROW7 0x0fc 0x2f4 0x548 0x04 0x000 #define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x05 0x000 #define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x00 0x000 @@ -512,9 +518,11 @@ #define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x00 0x000 #define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x05 0x000 +#define MX25_PAD_FEC_TX_EN__KPP_ROW4 0x1d8 0x3d0 0x53c 0x06 0x000 #define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x00 0x000 #define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x05 0x000 +#define MX25_PAD_FEC_RDATA0__KPP_ROW5 0x1dc 0x3d4 0x540 0x06 0x000 #define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x00 0x000 /* diff --git a/sys/gnu/dts/arm/imx25.dtsi b/sys/gnu/dts/arm/imx25.dtsi index 40b95a290bd6..1123e683025c 100644 --- a/sys/gnu/dts/arm/imx25.dtsi +++ b/sys/gnu/dts/arm/imx25.dtsi @@ -75,7 +75,7 @@ interrupt-parent = <&asic>; ranges; - aips@43f00000 { /* AIPS1 */ + bus@43f00000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -332,7 +332,7 @@ }; }; - aips@53f00000 { /* AIPS2 */ + bus@53f00000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/sys/gnu/dts/arm/imx27-phytec-phycard-s-rdk.dts b/sys/gnu/dts/arm/imx27-phytec-phycard-s-rdk.dts index 0cd75dadf292..188639738dc3 100644 --- a/sys/gnu/dts/arm/imx27-phytec-phycard-s-rdk.dts +++ b/sys/gnu/dts/arm/imx27-phytec-phycard-s-rdk.dts @@ -75,8 +75,8 @@ imx27-phycard-s-rdk { pinctrl_i2c1: i2c1grp { fsl,pins = < - MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 - MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 + MX27_PAD_I2C_DATA__I2C_DATA 0x0 + MX27_PAD_I2C_CLK__I2C_CLK 0x0 >; }; diff --git a/sys/gnu/dts/arm/imx27.dtsi b/sys/gnu/dts/arm/imx27.dtsi index f3464cf52e49..002cd223f22d 100644 --- a/sys/gnu/dts/arm/imx27.dtsi +++ b/sys/gnu/dts/arm/imx27.dtsi @@ -525,7 +525,7 @@ reg = <0x10024600 0x200>; }; - sahara2: sahara@10025000 { + sahara2: crypto@10025000 { compatible = "fsl,imx27-sahara"; reg = <0x10025000 0x1000>; interrupts = <59>; diff --git a/sys/gnu/dts/arm/imx28-apx4devkit.dts b/sys/gnu/dts/arm/imx28-apx4devkit.dts index 3a184d13887b..c5acc19c982d 100644 --- a/sys/gnu/dts/arm/imx28-apx4devkit.dts +++ b/sys/gnu/dts/arm/imx28-apx4devkit.dts @@ -183,10 +183,20 @@ pinctrl-0 = <&auart2_2pins_a>; status = "okay"; }; + + usbphy1: usbphy@8007e000 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + status = "okay"; + }; }; }; ahb@80080000 { + usb1: usb@80090000 { + status = "okay"; + }; + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; diff --git a/sys/gnu/dts/arm/imx28.dtsi b/sys/gnu/dts/arm/imx28.dtsi index e14d8ef0158b..a1cbbeb39a4f 100644 --- a/sys/gnu/dts/arm/imx28.dtsi +++ b/sys/gnu/dts/arm/imx28.dtsi @@ -998,7 +998,7 @@ clocks = <&clks 26>; }; - dcp: dcp@80028000 { + dcp: crypto@80028000 { compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; reg = <0x80028000 0x2000>; interrupts = <52 53 54>; diff --git a/sys/gnu/dts/arm/imx31.dtsi b/sys/gnu/dts/arm/imx31.dtsi index 6b62f0745b82..18270ec648fe 100644 --- a/sys/gnu/dts/arm/imx31.dtsi +++ b/sys/gnu/dts/arm/imx31.dtsi @@ -63,7 +63,7 @@ ranges = <0 0x1fffc000 0x4000>; }; - aips@43f00000 { /* AIPS1 */ + bus@43f00000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -225,7 +225,7 @@ }; }; - aips@53f00000 { /* AIPS2 */ + bus@53f00000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/sys/gnu/dts/arm/imx35.dtsi b/sys/gnu/dts/arm/imx35.dtsi index 9cbdc1a15cda..2ebf2c1fa682 100644 --- a/sys/gnu/dts/arm/imx35.dtsi +++ b/sys/gnu/dts/arm/imx35.dtsi @@ -66,7 +66,7 @@ cache-level = <2>; }; - aips1: aips@43f00000 { + aips1: bus@43f00000 { compatible = "fsl,aips", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -199,7 +199,7 @@ }; }; - aips2: aips@53f00000 { + aips2: bus@53f00000 { compatible = "fsl,aips", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/sys/gnu/dts/arm/imx50.dtsi b/sys/gnu/dts/arm/imx50.dtsi index 0bfe7c91d0eb..d325658901c5 100644 --- a/sys/gnu/dts/arm/imx50.dtsi +++ b/sys/gnu/dts/arm/imx50.dtsi @@ -101,7 +101,7 @@ interrupt-parent = <&tzic>; ranges; - aips@50000000 { /* AIPS1 */ + bus@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -389,7 +389,7 @@ }; }; - aips@60000000 { /* AIPS2 */ + bus@60000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/sys/gnu/dts/arm/imx51-zii-rdu1.dts b/sys/gnu/dts/arm/imx51-zii-rdu1.dts index 3596060f52e7..e559ab0c3645 100644 --- a/sys/gnu/dts/arm/imx51-zii-rdu1.dts +++ b/sys/gnu/dts/arm/imx51-zii-rdu1.dts @@ -217,8 +217,8 @@ simple-audio-card,widgets = "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Headphone Jack", "HPLEFT", - "Headphone Jack", "HPRIGHT"; + "Headphone Jack", "TPA6130A2 HPLEFT", + "Headphone Jack", "TPA6130A2 HPRIGHT"; simple-audio-card,aux-devs = <&hpa1>; sound_cpu: simple-audio-card,cpu { @@ -470,6 +470,7 @@ compatible = "ti,tpa6130a2"; reg = <0x60>; Vdd-supply = <®_3p3v>; + sound-name-prefix = "TPA6130A2"; }; ds1341: rtc@68 { diff --git a/sys/gnu/dts/arm/imx51.dtsi b/sys/gnu/dts/arm/imx51.dtsi index dea86b98e9c3..92fbb90bec57 100644 --- a/sys/gnu/dts/arm/imx51.dtsi +++ b/sys/gnu/dts/arm/imx51.dtsi @@ -104,6 +104,11 @@ #phy-cells = <0>; }; + capture-subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu_csi0>, <&ipu_csi1>; + }; + display-subsystem { compatible = "fsl,imx-display-subsystem"; ports = <&ipu_di0>, <&ipu_di1>; @@ -143,6 +148,14 @@ clock-names = "bus", "di0", "di1"; resets = <&src 2>; + ipu_csi0: port@0 { + reg = <0>; + }; + + ipu_csi1: port@1 { + reg = <1>; + }; + ipu_di0: port@2 { reg = <2>; @@ -158,7 +171,7 @@ }; }; - aips@70000000 { /* AIPS1 */ + bus@70000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -440,7 +453,7 @@ }; }; - aips@80000000 { /* AIPS2 */ + bus@80000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/sys/gnu/dts/arm/imx53.dtsi b/sys/gnu/dts/arm/imx53.dtsi index ed341cfd9d09..8536f59f59e6 100644 --- a/sys/gnu/dts/arm/imx53.dtsi +++ b/sys/gnu/dts/arm/imx53.dtsi @@ -222,7 +222,7 @@ clock-names = "core_clk", "mem_iface_clk"; }; - aips@50000000 { /* AIPS1 */ + bus@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -654,7 +654,7 @@ }; }; - aips@60000000 { /* AIPS2 */ + bus@60000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/sys/gnu/dts/arm/imx6dl-colibri-eval-v3.dts b/sys/gnu/dts/arm/imx6dl-colibri-eval-v3.dts index 84fcc203a2e4..65359aece950 100644 --- a/sys/gnu/dts/arm/imx6dl-colibri-eval-v3.dts +++ b/sys/gnu/dts/arm/imx6dl-colibri-eval-v3.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2016 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/sys/gnu/dts/arm/imx6dl-pico-dwarf.dts b/sys/gnu/dts/arm/imx6dl-pico-dwarf.dts new file mode 100644 index 000000000000..659a8e8714ea --- /dev/null +++ b/sys/gnu/dts/arm/imx6dl-pico-dwarf.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 DualLite/Solo Board and Dwarf baseboard"; + compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; +}; diff --git a/sys/gnu/dts/arm/imx6dl-pico-hobbit.dts b/sys/gnu/dts/arm/imx6dl-pico-hobbit.dts new file mode 100644 index 000000000000..d7403c5c4337 --- /dev/null +++ b/sys/gnu/dts/arm/imx6dl-pico-hobbit.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-pico-hobbit.dtsi" + +/ { + model = "TechNexion PICO-IMX6 DualLite/Solo Board and Hobbit baseboard"; + compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; +}; diff --git a/sys/gnu/dts/arm/imx6dl-pico-nymph.dts b/sys/gnu/dts/arm/imx6dl-pico-nymph.dts new file mode 100644 index 000000000000..b282dbf953aa --- /dev/null +++ b/sys/gnu/dts/arm/imx6dl-pico-nymph.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 DualLite/Solo Board and Nymph baseboard"; + compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; +}; diff --git a/sys/gnu/dts/arm/imx6dl-pico-pi.dts b/sys/gnu/dts/arm/imx6dl-pico-pi.dts new file mode 100644 index 000000000000..b7b1c07f96f3 --- /dev/null +++ b/sys/gnu/dts/arm/imx6dl-pico-pi.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 DualLite/Solo Board and PI baseboard"; + compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; +}; diff --git a/sys/gnu/dts/arm/imx6dl-riotboard.dts b/sys/gnu/dts/arm/imx6dl-riotboard.dts index 829654e1835a..065d3ab0f50a 100644 --- a/sys/gnu/dts/arm/imx6dl-riotboard.dts +++ b/sys/gnu/dts/arm/imx6dl-riotboard.dts @@ -89,11 +89,25 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + phy-handle = <&rgmii_phy>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8035 PHY */ + rgmii_phy: ethernet-phy@4 { + reg = <4>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + }; + }; }; &gpio1 { diff --git a/sys/gnu/dts/arm/imx6dl-yapp4-common.dtsi b/sys/gnu/dts/arm/imx6dl-yapp4-common.dtsi index 80ed5f16a76e..2b9423d55c37 100644 --- a/sys/gnu/dts/arm/imx6dl-yapp4-common.dtsi +++ b/sys/gnu/dts/arm/imx6dl-yapp4-common.dtsi @@ -562,6 +562,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; vbus-supply = <®_usb_h1_vbus>; + over-current-active-low; status = "disabled"; }; @@ -569,6 +570,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; vbus-supply = <®_usb_otg_vbus>; + over-current-active-low; srp-disable; hnp-disable; adp-disable; diff --git a/sys/gnu/dts/arm/imx6dl-yapp4-ursa.dts b/sys/gnu/dts/arm/imx6dl-yapp4-ursa.dts index 0d594e4bd559..a1173bf5bff5 100644 --- a/sys/gnu/dts/arm/imx6dl-yapp4-ursa.dts +++ b/sys/gnu/dts/arm/imx6dl-yapp4-ursa.dts @@ -38,7 +38,7 @@ }; &switch_ports { - /delete-node/ port@2; + /delete-node/ port@3; }; &touchscreen { diff --git a/sys/gnu/dts/arm/imx6dl.dtsi b/sys/gnu/dts/arm/imx6dl.dtsi index 008312ee0c31..77b65a402e19 100644 --- a/sys/gnu/dts/arm/imx6dl.dtsi +++ b/sys/gnu/dts/arm/imx6dl.dtsi @@ -44,6 +44,8 @@ arm-supply = <®_arm>; pu-supply = <®_pu>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; cpu@1 { @@ -85,8 +87,8 @@ clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips1: aips-bus@2000000 { - iomuxc: iomuxc@20e0000 { + aips1: bus@2000000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6dl-iomuxc"; }; @@ -101,7 +103,7 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { i2c4: i2c@21f8000 { #address-cells = <1>; #size-cells = <0>; diff --git a/sys/gnu/dts/arm/imx6q-apalis-eval.dts b/sys/gnu/dts/arm/imx6q-apalis-eval.dts index 4665e15b196d..fab83abb6466 100644 --- a/sys/gnu/dts/arm/imx6q-apalis-eval.dts +++ b/sys/gnu/dts/arm/imx6q-apalis-eval.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2017 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/sys/gnu/dts/arm/imx6q-apalis-ixora-v1.1.dts b/sys/gnu/dts/arm/imx6q-apalis-ixora-v1.1.dts index a3fa04a97d81..1614b1ae501d 100644 --- a/sys/gnu/dts/arm/imx6q-apalis-ixora-v1.1.dts +++ b/sys/gnu/dts/arm/imx6q-apalis-ixora-v1.1.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2017 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/sys/gnu/dts/arm/imx6q-apalis-ixora.dts b/sys/gnu/dts/arm/imx6q-apalis-ixora.dts index 5ba49d0f4880..fa9f98dd15ac 100644 --- a/sys/gnu/dts/arm/imx6q-apalis-ixora.dts +++ b/sys/gnu/dts/arm/imx6q-apalis-ixora.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2017 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/sys/gnu/dts/arm/imx6q-b450v3.dts b/sys/gnu/dts/arm/imx6q-b450v3.dts index 95b8f2d71821..fb0980190aa0 100644 --- a/sys/gnu/dts/arm/imx6q-b450v3.dts +++ b/sys/gnu/dts/arm/imx6q-b450v3.dts @@ -65,13 +65,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; -}; - &ldb { status = "okay"; diff --git a/sys/gnu/dts/arm/imx6q-b650v3.dts b/sys/gnu/dts/arm/imx6q-b650v3.dts index 611cb7ae7e55..8f762d9c5ae9 100644 --- a/sys/gnu/dts/arm/imx6q-b650v3.dts +++ b/sys/gnu/dts/arm/imx6q-b650v3.dts @@ -65,13 +65,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; -}; - &ldb { status = "okay"; diff --git a/sys/gnu/dts/arm/imx6q-b850v3.dts b/sys/gnu/dts/arm/imx6q-b850v3.dts index e4cb118f88c6..1ea64ecf4291 100644 --- a/sys/gnu/dts/arm/imx6q-b850v3.dts +++ b/sys/gnu/dts/arm/imx6q-b850v3.dts @@ -53,17 +53,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>, - <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, - <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, - <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, - <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, - <&clks IMX6QDL_CLK_PLL2_PFD2_396M>; -}; - &ldb { fsl,dual-channel; status = "okay"; diff --git a/sys/gnu/dts/arm/imx6q-bx50v3.dtsi b/sys/gnu/dts/arm/imx6q-bx50v3.dtsi index fa27dcdf06f1..1938b04199c4 100644 --- a/sys/gnu/dts/arm/imx6q-bx50v3.dtsi +++ b/sys/gnu/dts/arm/imx6q-bx50v3.dtsi @@ -377,3 +377,18 @@ #interrupt-cells = <1>; }; }; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>; +}; diff --git a/sys/gnu/dts/arm/imx6q-marsboard.dts b/sys/gnu/dts/arm/imx6q-marsboard.dts index 84b30bd6908f..05ee28388229 100644 --- a/sys/gnu/dts/arm/imx6q-marsboard.dts +++ b/sys/gnu/dts/arm/imx6q-marsboard.dts @@ -111,8 +111,22 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + phy-handle = <&rgmii_phy>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8035 PHY */ + rgmii_phy: ethernet-phy@4 { + reg = <4>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + }; + }; }; &hdmi { diff --git a/sys/gnu/dts/arm/imx6q-novena.dts b/sys/gnu/dts/arm/imx6q-novena.dts index 61347a545d6c..69f170ff31c5 100644 --- a/sys/gnu/dts/arm/imx6q-novena.dts +++ b/sys/gnu/dts/arm/imx6q-novena.dts @@ -107,7 +107,7 @@ }; panel: panel { - compatible = "innolux,n133hse-ea1", "simple-panel"; + compatible = "innolux,n133hse-ea1"; backlight = <&backlight>; }; diff --git a/sys/gnu/dts/arm/imx6q-pico-dwarf.dts b/sys/gnu/dts/arm/imx6q-pico-dwarf.dts new file mode 100644 index 000000000000..618d2743e1e9 --- /dev/null +++ b/sys/gnu/dts/arm/imx6q-pico-dwarf.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 Quad Board and Dwarf baseboard"; + compatible = "technexion,imx6q-pico", "fsl,imx6q"; +}; diff --git a/sys/gnu/dts/arm/imx6q-pico-hobbit.dts b/sys/gnu/dts/arm/imx6q-pico-hobbit.dts new file mode 100644 index 000000000000..7a666507b456 --- /dev/null +++ b/sys/gnu/dts/arm/imx6q-pico-hobbit.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-pico-hobbit.dtsi" + +/ { + model = "TechNexion PICO-IMX6 Quad Board and Hobbit baseboard"; + compatible = "technexion,imx6q-pico", "fsl,imx6q"; +}; diff --git a/sys/gnu/dts/arm/imx6q-pico-nymph.dts b/sys/gnu/dts/arm/imx6q-pico-nymph.dts new file mode 100644 index 000000000000..fe5a7becc9e5 --- /dev/null +++ b/sys/gnu/dts/arm/imx6q-pico-nymph.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 Quad Board and Nymph baseboard"; + compatible = "technexion,imx6q-pico", "fsl,imx6q"; +}; diff --git a/sys/gnu/dts/arm/imx6q-pico-pi.dts b/sys/gnu/dts/arm/imx6q-pico-pi.dts new file mode 100644 index 000000000000..9413f0a68f54 --- /dev/null +++ b/sys/gnu/dts/arm/imx6q-pico-pi.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 Quad Board and PI baseboard"; + compatible = "technexion,imx6q-pico", "fsl,imx6q"; +}; diff --git a/sys/gnu/dts/arm/imx6q.dtsi b/sys/gnu/dts/arm/imx6q.dtsi index 9d3be1cc6b64..78a4d64929f3 100644 --- a/sys/gnu/dts/arm/imx6q.dtsi +++ b/sys/gnu/dts/arm/imx6q.dtsi @@ -49,6 +49,8 @@ arm-supply = <®_arm>; pu-supply = <®_pu>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; cpu1: cpu@1 { @@ -164,7 +166,7 @@ clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips-bus@2000000 { /* AIPS1 */ + bus@2000000 { /* AIPS1 */ spba-bus@2000000 { ecspi5: spi@2018000 { #address-cells = <1>; @@ -181,7 +183,7 @@ }; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6q-iomuxc"; }; }; diff --git a/sys/gnu/dts/arm/imx6qdl-apalis.dtsi b/sys/gnu/dts/arm/imx6qdl-apalis.dtsi index 1b5bc6b5e806..e34be8fabd93 100644 --- a/sys/gnu/dts/arm/imx6qdl-apalis.dtsi +++ b/sys/gnu/dts/arm/imx6qdl-apalis.dtsi @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2017 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -180,7 +144,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy>; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; diff --git a/sys/gnu/dts/arm/imx6qdl-colibri.dtsi b/sys/gnu/dts/arm/imx6qdl-colibri.dtsi index d03dff23863d..6e3c6b4925a7 100644 --- a/sys/gnu/dts/arm/imx6qdl-colibri.dtsi +++ b/sys/gnu/dts/arm/imx6qdl-colibri.dtsi @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2016 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/sys/gnu/dts/arm/imx6qdl-gw52xx.dtsi b/sys/gnu/dts/arm/imx6qdl-gw52xx.dtsi index 1a9a9d98f284..60563ff0b7ce 100644 --- a/sys/gnu/dts/arm/imx6qdl-gw52xx.dtsi +++ b/sys/gnu/dts/arm/imx6qdl-gw52xx.dtsi @@ -313,6 +313,11 @@ interrupts = <12 2>; wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; + + accel@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + }; }; &ldb { diff --git a/sys/gnu/dts/arm/imx6qdl-gw53xx.dtsi b/sys/gnu/dts/arm/imx6qdl-gw53xx.dtsi index 54b2beadd7a2..8942bec65c5c 100644 --- a/sys/gnu/dts/arm/imx6qdl-gw53xx.dtsi +++ b/sys/gnu/dts/arm/imx6qdl-gw53xx.dtsi @@ -304,6 +304,11 @@ interrupts = <11 2>; wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; + + accel@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + }; }; &ldb { diff --git a/sys/gnu/dts/arm/imx6qdl-gw54xx.dtsi b/sys/gnu/dts/arm/imx6qdl-gw54xx.dtsi index 1b6c1331c220..c40583dbd96d 100644 --- a/sys/gnu/dts/arm/imx6qdl-gw54xx.dtsi +++ b/sys/gnu/dts/arm/imx6qdl-gw54xx.dtsi @@ -361,6 +361,11 @@ interrupts = <12 2>; wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; + + accel@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + }; }; &ldb { diff --git a/sys/gnu/dts/arm/imx6qdl-gw553x.dtsi b/sys/gnu/dts/arm/imx6qdl-gw553x.dtsi index a1066897be18..ee85031c3916 100644 --- a/sys/gnu/dts/arm/imx6qdl-gw553x.dtsi +++ b/sys/gnu/dts/arm/imx6qdl-gw553x.dtsi @@ -173,6 +173,25 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + magn@1c { + compatible = "st,lsm9ds1-magn"; + reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mag>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + }; + + imu@6a { + compatible = "st,lsm9ds1-imu"; + reg = <0x6a>; + st,drdy-int-pin = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imu>; + interrupt-parent = <&gpio7>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + }; + ltc3676: pmic@3c { compatible = "lltc,ltc3676"; reg = <0x3c>; @@ -426,6 +445,12 @@ >; }; + pinctrl_imu: imugrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + >; + }; + pinctrl_ipu1_csi0: ipu1csi0grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 @@ -449,6 +474,12 @@ >; }; + pinctrl_mag: maggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 diff --git a/sys/gnu/dts/arm/imx6qdl-gw5910.dtsi b/sys/gnu/dts/arm/imx6qdl-gw5910.dtsi index be1af7482f89..30fe47ff64a4 100644 --- a/sys/gnu/dts/arm/imx6qdl-gw5910.dtsi +++ b/sys/gnu/dts/arm/imx6qdl-gw5910.dtsi @@ -220,6 +220,14 @@ status = "okay"; }; +/* cc1352 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + /* Sterling-LWB Bluetooth */ &uart4 { pinctrl-names = "default"; @@ -411,6 +419,23 @@ >; }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x4001b0b1 /* DIO20 */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x4001b0b1 /* DIO14 */ + MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x4001b0b1 /* DIO15 */ + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b1 /* TMS */ + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b1 /* TCK */ + MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b1 /* TDO */ + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b1 /* TDI */ + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x4001b0b1 /* RST# */ + >; + }; + pinctrl_uart4: uart4grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 diff --git a/sys/gnu/dts/arm/imx6qdl-phytec-phycore-som.dtsi b/sys/gnu/dts/arm/imx6qdl-phytec-phycore-som.dtsi index 77d871340eb7..41ebe4599e43 100644 --- a/sys/gnu/dts/arm/imx6qdl-phytec-phycore-som.dtsi +++ b/sys/gnu/dts/arm/imx6qdl-phytec-phycore-som.dtsi @@ -88,7 +88,7 @@ reg = <0x50>; }; - pmic@58 { + pmic: pmic@58 { compatible = "dlg,da9062"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; @@ -96,6 +96,8 @@ interrupt-parent = <&gpio1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + gpio-controller; + #gpio-cells = <2>; da9062_rtc: rtc { compatible = "dlg,da9062-rtc"; @@ -107,6 +109,7 @@ watchdog { compatible = "dlg,da9062-watchdog"; + dlg,use-sw-pm; }; regulators { diff --git a/sys/gnu/dts/arm/imx6qdl-pico-dwarf.dtsi b/sys/gnu/dts/arm/imx6qdl-pico-dwarf.dtsi new file mode 100644 index 000000000000..3a968782e854 --- /dev/null +++ b/sys/gnu/dts/arm/imx6qdl-pico-dwarf.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2017 NXP + +#include "imx6qdl-pico.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&i2c1 { + mpl3115@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; +}; + +&i2c2 { + io-expander@25 { + compatible = "nxp,pca9554"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 + >; + }; +}; diff --git a/sys/gnu/dts/arm/imx6qdl-pico-hobbit.dtsi b/sys/gnu/dts/arm/imx6qdl-pico-hobbit.dtsi new file mode 100644 index 000000000000..144c4727fbc7 --- /dev/null +++ b/sys/gnu/dts/arm/imx6qdl-pico-hobbit.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2017 NXP + +#include "imx6qdl-pico.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&i2c2 { + status = "okay"; + + adc081c: adc@50 { + compatible = "ti,adc081c"; + reg = <0x50>; + vref-supply = <®_3p3v>; + }; +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 + >; + }; +}; diff --git a/sys/gnu/dts/arm/imx6qdl-pico-nymph.dtsi b/sys/gnu/dts/arm/imx6qdl-pico-nymph.dtsi new file mode 100644 index 000000000000..3d56a4216448 --- /dev/null +++ b/sys/gnu/dts/arm/imx6qdl-pico-nymph.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT + +#include "imx6qdl-pico.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&i2c1 { + adc@52 { + compatible = "ti,adc081c"; + reg = <0x52>; + vref-supply = <®_2p5v>; + }; +}; + +&i2c2 { + io-expander@25 { + compatible = "nxp,pca9554"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; +}; + +&i2c3 { + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +&pcie { + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 + >; + }; +}; diff --git a/sys/gnu/dts/arm/imx6qdl-pico-pi.dtsi b/sys/gnu/dts/arm/imx6qdl-pico-pi.dtsi new file mode 100644 index 000000000000..b823dce62e63 --- /dev/null +++ b/sys/gnu/dts/arm/imx6qdl-pico-pi.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2017 NXP + +#include "imx6qdl-pico.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&hdmi { + status = "disabled"; +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 + >; + }; +}; diff --git a/sys/gnu/dts/arm/imx6qdl-pico.dtsi b/sys/gnu/dts/arm/imx6qdl-pico.dtsi new file mode 100644 index 000000000000..39dfd90c2c6b --- /dev/null +++ b/sys/gnu/dts/arm/imx6qdl-pico.dtsi @@ -0,0 +1,617 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_1p5v: regulator-1p5v { + compatible = "regulator-fixed"; + regulator-name = "1P5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reg_2p8v: regulator-2p8v { + compatible = "regulator-fixed"; + regulator-name = "2P8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; + }; + + codec_osc: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6-pico-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 50000 0>; + brightness-levels = <0 36 72 108 144 180 216 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd>; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lcd_display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel { + compatible = "vxt,vl050-8048nt-c01"; + backlight = <&backlight>; + power-supply = <®_lcd_3v3>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: audio-codec@a { + #sound-dai-cells = <0>; + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&codec_osc>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_1p8v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio5>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + wakeup-source; + }; + + camera@3c { + compatible = "ovti,ov5645"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5645>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-names = "xclk"; + clock-frequency = <24000000>; + vdddo-supply = <®_1p8v>; + vdda-supply = <®_2p8v>; + vddd-supply = <®_1p5v>; + enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + + port { + ov5645_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5645_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reset>; + reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { /* Bluetooth module */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc2 { /* Wifi/BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + keep-power-in-suspend; + non-removable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x4001b0b5 /* PICO_P24 */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x4001b0b5 /* PICO_P26 */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b5 /* PICO_P28 */ + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b0b5 /* PICO_P30 */ + MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b0b5 /* PICO_P32 */ + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x4001b0b5 /* PICO_P34 */ + MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x4001b0b5 /* PICO_P42 */ + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x4001b0b5 /* PICO_P44 */ + MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x4001b0b5 /* PICO_P48 */ + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x000f0b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x1b0b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x1b0b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x1b0b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000f0b0 + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x000f0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1f0b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_ov5645: ov5645grp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x0b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 + MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 + >; + }; + + pinctrl_pcie_reset: pciegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x130b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_lcd: reglcdgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usbotg_vbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x17071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0xb0b1 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; +}; diff --git a/sys/gnu/dts/arm/imx6qdl-sr-som-ti.dtsi b/sys/gnu/dts/arm/imx6qdl-sr-som-ti.dtsi index 44a97ba93a95..352ac585ca6b 100644 --- a/sys/gnu/dts/arm/imx6qdl-sr-som-ti.dtsi +++ b/sys/gnu/dts/arm/imx6qdl-sr-som-ti.dtsi @@ -153,6 +153,7 @@ bus-width = <4>; keep-power-in-suspend; mmc-pwrseq = <&pwrseq_ti_wifi>; + cap-power-off-card; non-removable; vmmc-supply = <&vcc_3v3>; /* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */ diff --git a/sys/gnu/dts/arm/imx6qdl-zii-rdu2.dtsi b/sys/gnu/dts/arm/imx6qdl-zii-rdu2.dtsi index 0075637f9b0b..20350e803377 100644 --- a/sys/gnu/dts/arm/imx6qdl-zii-rdu2.dtsi +++ b/sys/gnu/dts/arm/imx6qdl-zii-rdu2.dtsi @@ -216,6 +216,13 @@ }; }; +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; +}; + &cpu0 { fsl,soc-operating-points = < /* ARM kHz SOC-PU uV */ diff --git a/sys/gnu/dts/arm/imx6qdl.dtsi b/sys/gnu/dts/arm/imx6qdl.dtsi index e6b4b8525f98..98da446aa0f2 100644 --- a/sys/gnu/dts/arm/imx6qdl.dtsi +++ b/sys/gnu/dts/arm/imx6qdl.dtsi @@ -294,7 +294,7 @@ status = "disabled"; }; - aips-bus@2000000 { /* AIPS1 */ + bus@2000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -574,7 +574,7 @@ status = "disabled"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; @@ -661,7 +661,7 @@ #interrupt-cells = <2>; }; - kpp: kpp@20b8000 { + kpp: keypad@20b8000 { compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; @@ -669,14 +669,14 @@ status = "disabled"; }; - wdog1: wdog@20bc000 { + wdog1: watchdog@20bc000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_IPG>; }; - wdog2: wdog@20c0000 { + wdog2: watchdog@20c0000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; @@ -684,7 +684,7 @@ status = "disabled"; }; - clks: ccm@20c4000 { + clks: clock-controller@20c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, @@ -908,7 +908,7 @@ }; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc"; reg = <0x20e0000 0x4000>; }; @@ -935,14 +935,14 @@ }; }; - aips-bus@2100000 { /* AIPS2 */ + bus@2100000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - crypto: caam@2100000 { + crypto: crypto@2100000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; @@ -954,13 +954,13 @@ <&clks IMX6QDL_CLK_EIM_SLOW>; clock-names = "mem", "aclk", "ipg", "emi_slow"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -1039,13 +1039,13 @@ compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupt-names = "int0", "pps"; - interrupts-extended = - <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>, - <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>, + <0 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>; clock-names = "ipg", "ahb", "ptp"; + gpr = <&gpr>; status = "disabled"; }; @@ -1161,10 +1161,16 @@ status = "disabled"; }; - ocotp: ocotp@21bc000 { + ocotp: ocotp-ctrl@21bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6QDL_CLK_IIM>; + #address-cells = <1>; + #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; tzasc@21d0000 { /* TZASC1 */ diff --git a/sys/gnu/dts/arm/imx6qp.dtsi b/sys/gnu/dts/arm/imx6qp.dtsi index 5f51f8e5c1fa..b310f13a53f2 100644 --- a/sys/gnu/dts/arm/imx6qp.dtsi +++ b/sys/gnu/dts/arm/imx6qp.dtsi @@ -18,7 +18,7 @@ clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips-bus@2100000 { + bus@2100000 { pre1: pre@21c8000 { compatible = "fsl,imx6qp-pre"; reg = <0x021c8000 0x1000>; @@ -77,7 +77,6 @@ }; &fec { - /delete-property/interrupts-extended; interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>, <0 119 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/sys/gnu/dts/arm/imx6sl.dtsi b/sys/gnu/dts/arm/imx6sl.dtsi index 59c54e6ad09a..8230b45057a1 100644 --- a/sys/gnu/dts/arm/imx6sl.dtsi +++ b/sys/gnu/dts/arm/imx6sl.dtsi @@ -74,6 +74,8 @@ arm-supply = <®_arm>; pu-supply = <®_pu>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; }; @@ -143,7 +145,7 @@ arm,data-latency = <4 2 3>; }; - aips1: aips-bus@2000000 { + aips1: bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -380,7 +382,7 @@ clock-names = "ipg", "per"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6sl-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; @@ -491,7 +493,7 @@ <&iomuxc 21 161 1>; }; - kpp: kpp@20b8000 { + kpp: keypad@20b8000 { compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; @@ -499,14 +501,14 @@ status = "disabled"; }; - wdog1: wdog@20bc000 { + wdog1: watchdog@20bc000 { compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_IPG>; }; - wdog2: wdog@20c0000 { + wdog2: watchdog@20c0000 { compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; @@ -514,7 +516,7 @@ status = "disabled"; }; - clks: ccm@20c4000 { + clks: clock-controller@20c4000 { compatible = "fsl,imx6sl-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, @@ -728,7 +730,7 @@ reg = <0x020e0000 0x38>; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6sl-iomuxc"; reg = <0x020e0000 0x4000>; }; @@ -777,7 +779,7 @@ power-domains = <&pd_disp>; }; - dcp: dcp@20fc000 { + dcp: crypto@20fc000 { compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; reg = <0x020fc000 0x4000>; interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>, @@ -786,7 +788,7 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -949,10 +951,16 @@ status = "disabled"; }; - ocotp: ocotp@21bc000 { + ocotp: ocotp-ctrl@21bc000 { compatible = "fsl,imx6sl-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SL_CLK_OCOTP>; + #address-cells = <1>; + #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; audmux: audmux@21d8000 { diff --git a/sys/gnu/dts/arm/imx6sll.dtsi b/sys/gnu/dts/arm/imx6sll.dtsi index a1bc5bb31756..edd3abb9a9f1 100644 --- a/sys/gnu/dts/arm/imx6sll.dtsi +++ b/sys/gnu/dts/arm/imx6sll.dtsi @@ -72,6 +72,8 @@ <&clks IMX6SLL_CLK_PLL1_SYS>; clock-names = "arm", "pll2_pfd2_396m", "step", "pll1_sw", "pll1_sys"; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; }; @@ -144,7 +146,7 @@ arm,data-latency = <4 2 3>; }; - aips1: aips-bus@2000000 { + aips1: bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -652,7 +654,7 @@ status = "disabled"; }; - dcp: dcp@20fc000 { + dcp: crypto@20fc000 { compatible = "fsl,imx28-dcp"; reg = <0x020fc000 0x4000>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, @@ -663,7 +665,7 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -791,6 +793,10 @@ reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SLL_CLK_OCOTP>; + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; + tempmon_calib: calib@38 { reg = <0x38 4>; }; diff --git a/sys/gnu/dts/arm/imx6sx-nitrogen6sx.dts b/sys/gnu/dts/arm/imx6sx-nitrogen6sx.dts index 832b5c5d7441..d84ea6999377 100644 --- a/sys/gnu/dts/arm/imx6sx-nitrogen6sx.dts +++ b/sys/gnu/dts/arm/imx6sx-nitrogen6sx.dts @@ -484,31 +484,31 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 >; }; pinctrl_uart2: uart2grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1 >; }; pinctrl_uart3: uart3grp { fsl,pins = < - MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x1b0b1 - MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x1b0b1 + MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX 0x1b0b1 + MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX 0x1b0b1 >; }; pinctrl_uart5: uart5grp { fsl,pins = < - MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 - MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 - MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x1b0b1 - MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x1b0b1 + MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x1b0b1 + MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS 0x1b0b1 + MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS 0x1b0b1 >; }; diff --git a/sys/gnu/dts/arm/imx6sx-pinfunc.h b/sys/gnu/dts/arm/imx6sx-pinfunc.h index aa194a2fdd53..0b02c7e60c17 100644 --- a/sys/gnu/dts/arm/imx6sx-pinfunc.h +++ b/sys/gnu/dts/arm/imx6sx-pinfunc.h @@ -42,8 +42,8 @@ #define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3 0x0020 0x0368 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP 0x0020 0x0368 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO03__PHY_TCK 0x0020 0x0368 0x0000 0x7 0x0 -#define MX6SX_PAD_GPIO1_IO04__UART1_RX 0x0024 0x036C 0x0830 0x0 0x0 -#define MX6SX_PAD_GPIO1_IO04__UART1_TX 0x0024 0x036C 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x0024 0x036C 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX 0x0024 0x036C 0x0830 0x0 0x0 #define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B 0x0024 0x036C 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO04__ENET1_MDC 0x0024 0x036C 0x0000 0x2 0x0 #define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT 0x0024 0x036C 0x0000 0x3 0x0 @@ -51,8 +51,8 @@ #define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4 0x0024 0x036C 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP 0x0024 0x036C 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO04__PHY_TMS 0x0024 0x036C 0x0000 0x7 0x0 -#define MX6SX_PAD_GPIO1_IO05__UART1_RX 0x0028 0x0370 0x0830 0x0 0x1 -#define MX6SX_PAD_GPIO1_IO05__UART1_TX 0x0028 0x0370 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x0028 0x0370 0x0830 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX 0x0028 0x0370 0x0000 0x0 0x0 #define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT 0x0028 0x0370 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO 0x0028 0x0370 0x0764 0x2 0x0 #define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK 0x0028 0x0370 0x0000 0x3 0x0 @@ -60,21 +60,23 @@ #define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5 0x0028 0x0370 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK 0x0028 0x0370 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO05__PHY_TDO 0x0028 0x0370 0x0000 0x7 0x0 -#define MX6SX_PAD_GPIO1_IO06__UART2_RX 0x002C 0x0374 0x0838 0x0 0x0 -#define MX6SX_PAD_GPIO1_IO06__UART2_TX 0x002C 0x0374 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x002C 0x0374 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX 0x002C 0x0374 0x0838 0x0 0x0 #define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B 0x002C 0x0374 0x086C 0x1 0x1 #define MX6SX_PAD_GPIO1_IO06__ENET2_MDC 0x002C 0x0374 0x0000 0x2 0x0 #define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK 0x002C 0x0374 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B 0x002C 0x0374 0x082C 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS 0x002C 0x0374 0x082C 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART1_DTE_CTS 0x002C 0x0374 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6 0x002C 0x0374 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET 0x002C 0x0374 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED 0x002C 0x0374 0x0000 0x7 0x0 -#define MX6SX_PAD_GPIO1_IO07__UART2_RX 0x0030 0x0378 0x0838 0x0 0x1 -#define MX6SX_PAD_GPIO1_IO07__UART2_TX 0x0030 0x0378 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x0030 0x0378 0x0838 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX 0x0030 0x0378 0x0000 0x0 0x0 #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS 0x0030 0x0378 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO07__UART1_DTE_RTS 0x0030 0x0378 0x082C 0x4 0x1 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0 @@ -83,7 +85,8 @@ #define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0034 0x037C 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0 0x0034 0x037C 0x081C 0x2 0x0 #define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY 0x0034 0x037C 0x069C 0x3 0x1 -#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B 0x0034 0x037C 0x0834 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS 0x0034 0x037C 0x0834 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO08__UART2_DTE_CTS 0x0034 0x037C 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8 0x0034 0x037C 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET 0x0034 0x037C 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT 0x0034 0x037C 0x0000 0x7 0x0 @@ -92,7 +95,8 @@ #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS 0x0038 0x0380 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO09__UART2_DTE_RTS 0x0038 0x0380 0x0834 0x4 0x1 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0 @@ -177,8 +181,8 @@ #define MX6SX_PAD_CSI_DATA04__ESAI_TX1 0x005C 0x03A4 0x0794 0x1 0x1 #define MX6SX_PAD_CSI_DATA04__SPDIF_OUT 0x005C 0x03A4 0x0000 0x2 0x0 #define MX6SX_PAD_CSI_DATA04__KPP_COL_6 0x005C 0x03A4 0x07CC 0x3 0x0 -#define MX6SX_PAD_CSI_DATA04__UART6_RX 0x005C 0x03A4 0x0858 0x4 0x0 -#define MX6SX_PAD_CSI_DATA04__UART6_TX 0x005C 0x03A4 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA04__UART6_DCE_RX 0x005C 0x03A4 0x0858 0x4 0x0 +#define MX6SX_PAD_CSI_DATA04__UART6_DTE_TX 0x005C 0x03A4 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x005C 0x03A4 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19 0x005C 0x03A4 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA04__PWM5_OUT 0x005C 0x03A4 0x0000 0x7 0x0 @@ -188,8 +192,8 @@ #define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1 0x0060 0x03A8 0x07A0 0x1 0x1 #define MX6SX_PAD_CSI_DATA05__SPDIF_IN 0x0060 0x03A8 0x0824 0x2 0x1 #define MX6SX_PAD_CSI_DATA05__KPP_ROW_6 0x0060 0x03A8 0x07D8 0x3 0x0 -#define MX6SX_PAD_CSI_DATA05__UART6_RX 0x0060 0x03A8 0x0858 0x4 0x1 -#define MX6SX_PAD_CSI_DATA05__UART6_TX 0x0060 0x03A8 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA05__UART6_DCE_TX 0x0060 0x03A8 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA05__UART6_DTE_RX 0x0060 0x03A8 0x0858 0x4 0x1 #define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x0060 0x03A8 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18 0x0060 0x03A8 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA05__PWM6_OUT 0x0060 0x03A8 0x0000 0x7 0x0 @@ -199,7 +203,8 @@ #define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3 0x0064 0x03AC 0x0798 0x1 0x1 #define MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x0064 0x03AC 0x07C0 0x2 0x2 #define MX6SX_PAD_CSI_DATA06__KPP_COL_7 0x0064 0x03AC 0x07D0 0x3 0x0 -#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x0064 0x03AC 0x0854 0x4 0x0 +#define MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS 0x0064 0x03AC 0x0854 0x4 0x0 +#define MX6SX_PAD_CSI_DATA06__UART6_DTE_CTS 0x0064 0x03AC 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20 0x0064 0x03AC 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17 0x0064 0x03AC 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA06__DCIC2_OUT 0x0064 0x03AC 0x0000 0x7 0x0 @@ -209,7 +214,8 @@ #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0 -#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS 0x0068 0x03B0 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA07__UART6_DTE_RTS 0x0068 0x03B0 0x0854 0x4 0x1 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0 @@ -218,7 +224,8 @@ #define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC 0x006C 0x03B4 0x0700 0x0 0x0 #define MX6SX_PAD_CSI_HSYNC__ESAI_TX0 0x006C 0x03B4 0x0790 0x1 0x1 #define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x006C 0x03B4 0x0678 0x2 0x1 -#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B 0x006C 0x03B4 0x0844 0x3 0x2 +#define MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS 0x006C 0x03B4 0x0844 0x3 0x2 +#define MX6SX_PAD_CSI_HSYNC__UART4_DTE_CTS 0x006C 0x03B4 0x0000 0x3 0x0 #define MX6SX_PAD_CSI_HSYNC__MQS_LEFT 0x006C 0x03B4 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22 0x006C 0x03B4 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25 0x006C 0x03B4 0x0000 0x6 0x0 @@ -228,8 +235,8 @@ #define MX6SX_PAD_CSI_MCLK__CSI1_MCLK 0x0070 0x03B8 0x0000 0x0 0x0 #define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK 0x0070 0x03B8 0x0784 0x1 0x1 #define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT 0x0070 0x03B8 0x0000 0x2 0x0 -#define MX6SX_PAD_CSI_MCLK__UART4_RX 0x0070 0x03B8 0x0848 0x3 0x2 -#define MX6SX_PAD_CSI_MCLK__UART4_TX 0x0070 0x03B8 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_MCLK__UART4_DCE_RX 0x0070 0x03B8 0x0848 0x3 0x2 +#define MX6SX_PAD_CSI_MCLK__UART4_DTE_TX 0x0070 0x03B8 0x0000 0x3 0x0 #define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT 0x0070 0x03B8 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23 0x0070 0x03B8 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26 0x0070 0x03B8 0x0000 0x6 0x0 @@ -239,8 +246,8 @@ #define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK 0x0074 0x03BC 0x0704 0x0 0x0 #define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK 0x0074 0x03BC 0x0780 0x1 0x1 #define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x0074 0x03BC 0x0000 0x2 0x0 -#define MX6SX_PAD_CSI_PIXCLK__UART4_RX 0x0074 0x03BC 0x0848 0x3 0x3 -#define MX6SX_PAD_CSI_PIXCLK__UART4_TX 0x0074 0x03BC 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX 0x0074 0x03BC 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX 0x0074 0x03BC 0x0848 0x3 0x3 #define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT 0x0074 0x03BC 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x0074 0x03BC 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27 0x0074 0x03BC 0x0000 0x6 0x0 @@ -250,7 +257,8 @@ #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1 -#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS 0x0078 0x03C0 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_VSYNC__UART4_DTE_RTS 0x0078 0x03C0 0x0844 0x3 0x3 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0 @@ -330,8 +338,8 @@ #define MX6SX_PAD_ENET2_COL__ENET2_COL 0x0094 0x03DC 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_COL__ENET1_MDC 0x0094 0x03DC 0x0000 0x1 0x0 #define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC 0x0094 0x03DC 0x064C 0x2 0x1 -#define MX6SX_PAD_ENET2_COL__UART1_RX 0x0094 0x03DC 0x0830 0x3 0x2 -#define MX6SX_PAD_ENET2_COL__UART1_TX 0x0094 0x03DC 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_COL__UART1_DCE_RX 0x0094 0x03DC 0x0830 0x3 0x2 +#define MX6SX_PAD_ENET2_COL__UART1_DTE_TX 0x0094 0x03DC 0x0000 0x3 0x0 #define MX6SX_PAD_ENET2_COL__SPDIF_IN 0x0094 0x03DC 0x0824 0x4 0x3 #define MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x0094 0x03DC 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID 0x0094 0x03DC 0x0624 0x6 0x1 @@ -341,8 +349,8 @@ #define MX6SX_PAD_ENET2_CRS__ENET2_CRS 0x0098 0x03E0 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_CRS__ENET1_MDIO 0x0098 0x03E0 0x0764 0x1 0x2 #define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS 0x0098 0x03E0 0x0650 0x2 0x1 -#define MX6SX_PAD_ENET2_CRS__UART1_RX 0x0098 0x03E0 0x0830 0x3 0x3 -#define MX6SX_PAD_ENET2_CRS__UART1_TX 0x0098 0x03E0 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_CRS__UART1_DCE_TX 0x0098 0x03E0 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_CRS__UART1_DTE_RX 0x0098 0x03E0 0x0830 0x3 0x3 #define MX6SX_PAD_ENET2_CRS__MLB_SIG 0x0098 0x03E0 0x07F0 0x4 0x1 #define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x0098 0x03E0 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID 0x0098 0x03E0 0x0628 0x6 0x1 @@ -352,7 +360,8 @@ #define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK 0x009C 0x03E4 0x0774 0x0 0x0 #define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x009C 0x03E4 0x0000 0x1 0x0 #define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL 0x009C 0x03E4 0x07B8 0x2 0x1 -#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B 0x009C 0x03E4 0x082C 0x3 0x2 +#define MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS 0x009C 0x03E4 0x082C 0x3 0x2 +#define MX6SX_PAD_ENET2_RX_CLK__UART1_DTE_CTS 0x009C 0x03E4 0x0000 0x3 0x0 #define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA 0x009C 0x03E4 0x07EC 0x4 0x1 #define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0x009C 0x03E4 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC 0x009C 0x03E4 0x085C 0x6 0x1 @@ -362,7 +371,8 @@ #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1 -#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS 0x00A0 0x03E8 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_DTE_RTS 0x00A0 0x03E8 0x082C 0x3 0x3 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0 @@ -371,7 +381,8 @@ #define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24 0x00A0 0x03E8 0x0000 0x9 0x0 #define MX6SX_PAD_KEY_COL0__KPP_COL_0 0x00A4 0x03EC 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_COL0__USDHC3_CD_B 0x00A4 0x03EC 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_COL0__UART6_RTS_B 0x00A4 0x03EC 0x0854 0x2 0x2 +#define MX6SX_PAD_KEY_COL0__UART6_DCE_RTS 0x00A4 0x03EC 0x0854 0x2 0x2 +#define MX6SX_PAD_KEY_COL0__UART6_DTE_CTS 0x00A4 0x03EC 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x00A4 0x03EC 0x0710 0x3 0x0 #define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x00A4 0x03EC 0x066C 0x4 0x0 #define MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x00A4 0x03EC 0x0000 0x5 0x0 @@ -380,8 +391,8 @@ #define MX6SX_PAD_KEY_COL0__VADC_DATA_0 0x00A4 0x03EC 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_COL1__KPP_COL_1 0x00A8 0x03F0 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B 0x00A8 0x03F0 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_COL1__UART6_RX 0x00A8 0x03F0 0x0858 0x2 0x2 -#define MX6SX_PAD_KEY_COL1__UART6_TX 0x00A8 0x03F0 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL1__UART6_DCE_TX 0x00A8 0x03F0 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL1__UART6_DTE_RX 0x00A8 0x03F0 0x0858 0x2 0x2 #define MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x00A8 0x03F0 0x0714 0x3 0x0 #define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x00A8 0x03F0 0x0670 0x4 0x0 #define MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x00A8 0x03F0 0x0000 0x5 0x0 @@ -389,7 +400,8 @@ #define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC 0x00A8 0x03F0 0x0818 0x7 0x0 #define MX6SX_PAD_KEY_COL2__KPP_COL_2 0x00AC 0x03F4 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_COL2__USDHC4_CD_B 0x00AC 0x03F4 0x0874 0x1 0x1 -#define MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x00AC 0x03F4 0x084C 0x2 0x2 +#define MX6SX_PAD_KEY_COL2__UART5_DCE_RTS 0x00AC 0x03F4 0x084C 0x2 0x2 +#define MX6SX_PAD_KEY_COL2__UART5_DTE_CTS 0x00AC 0x03F4 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_COL2__CAN1_TX 0x00AC 0x03F4 0x0000 0x3 0x0 #define MX6SX_PAD_KEY_COL2__CANFD_TX1 0x00AC 0x03F4 0x0000 0x4 0x0 #define MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x00AC 0x03F4 0x0000 0x5 0x0 @@ -397,8 +409,8 @@ #define MX6SX_PAD_KEY_COL2__ECSPI1_RDY 0x00AC 0x03F4 0x0000 0x7 0x0 #define MX6SX_PAD_KEY_COL3__KPP_COL_3 0x00B0 0x03F8 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_COL3__USDHC4_LCTL 0x00B0 0x03F8 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_COL3__UART5_RX 0x00B0 0x03F8 0x0850 0x2 0x2 -#define MX6SX_PAD_KEY_COL3__UART5_TX 0x00B0 0x03F8 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x00B0 0x03F8 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL3__UART5_DTE_RX 0x00B0 0x03F8 0x0850 0x2 0x2 #define MX6SX_PAD_KEY_COL3__CAN2_TX 0x00B0 0x03F8 0x0000 0x3 0x0 #define MX6SX_PAD_KEY_COL3__CANFD_TX2 0x00B0 0x03F8 0x0000 0x4 0x0 #define MX6SX_PAD_KEY_COL3__GPIO2_IO_13 0x00B0 0x03F8 0x0000 0x5 0x0 @@ -414,7 +426,8 @@ #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS 0x00B8 0x0400 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW0__UART6_DTE_RTS 0x00B8 0x0400 0x0854 0x2 0x3 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0 @@ -423,8 +436,8 @@ #define MX6SX_PAD_KEY_ROW0__GPU_IDLE 0x00B8 0x0400 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_ROW1__KPP_ROW_1 0x00BC 0x0404 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT 0x00BC 0x0404 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW1__UART6_RX 0x00BC 0x0404 0x0858 0x2 0x3 -#define MX6SX_PAD_KEY_ROW1__UART6_TX 0x00BC 0x0404 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW1__UART6_DCE_RX 0x00BC 0x0404 0x0858 0x2 0x3 +#define MX6SX_PAD_KEY_ROW1__UART6_DTE_TX 0x00BC 0x0404 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0 0x00BC 0x0404 0x071C 0x3 0x0 #define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x00BC 0x0404 0x065C 0x4 0x0 #define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x00BC 0x0404 0x0000 0x5 0x0 @@ -433,7 +446,8 @@ #define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1 -#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS 0x00C0 0x0408 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW2__UART5_DTE_RTS 0x00C0 0x0408 0x084C 0x2 0x3 #define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0 @@ -441,8 +455,8 @@ #define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3 0x00C0 0x0408 0x0000 0x7 0x0 #define MX6SX_PAD_KEY_ROW3__KPP_ROW_3 0x00C4 0x040C 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL 0x00C4 0x040C 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW3__UART5_RX 0x00C4 0x040C 0x0850 0x2 0x3 -#define MX6SX_PAD_KEY_ROW3__UART5_TX 0x00C4 0x040C 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x00C4 0x040C 0x0850 0x2 0x3 +#define MX6SX_PAD_KEY_ROW3__UART5_DTE_TX 0x00C4 0x040C 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW3__CAN2_RX 0x00C4 0x040C 0x0690 0x3 0x1 #define MX6SX_PAD_KEY_ROW3__CANFD_RX2 0x00C4 0x040C 0x0698 0x4 0x1 #define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18 0x00C4 0x040C 0x0000 0x5 0x0 @@ -815,7 +829,8 @@ #define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04 0x0160 0x04A8 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4 0x0160 0x04A8 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B 0x0160 0x04A8 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B 0x0160 0x04A8 0x083C 0x3 0x0 +#define MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS 0x0160 0x04A8 0x083C 0x3 0x0 +#define MX6SX_PAD_NAND_DATA04__UART3_DTE_CTS 0x0160 0x04A8 0x0000 0x3 0x0 #define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS 0x0160 0x04A8 0x0650 0x4 0x0 #define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x0160 0x04A8 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA04__WEIM_AD_4 0x0160 0x04A8 0x0000 0x6 0x0 @@ -825,7 +840,8 @@ #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS 0x0164 0x04AC 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA05__UART3_DTE_RTS 0x0164 0x04AC 0x083C 0x3 0x1 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0 @@ -835,8 +851,8 @@ #define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06 0x0168 0x04B0 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6 0x0168 0x04B0 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B 0x0168 0x04B0 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA06__UART3_RX 0x0168 0x04B0 0x0840 0x3 0x0 -#define MX6SX_PAD_NAND_DATA06__UART3_TX 0x0168 0x04B0 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA06__UART3_DCE_RX 0x0168 0x04B0 0x0840 0x3 0x0 +#define MX6SX_PAD_NAND_DATA06__UART3_DTE_TX 0x0168 0x04B0 0x0000 0x3 0x0 #define MX6SX_PAD_NAND_DATA06__PWM3_OUT 0x0168 0x04B0 0x0000 0x4 0x0 #define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0x0168 0x04B0 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA06__WEIM_AD_6 0x0168 0x04B0 0x0000 0x6 0x0 @@ -846,8 +862,8 @@ #define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07 0x016C 0x04B4 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7 0x016C 0x04B4 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS 0x016C 0x04B4 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA07__UART3_RX 0x016C 0x04B4 0x0840 0x3 0x1 -#define MX6SX_PAD_NAND_DATA07__UART3_TX 0x016C 0x04B4 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA07__UART3_DCE_TX 0x016C 0x04B4 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA07__UART3_DTE_RX 0x016C 0x04B4 0x0840 0x3 0x1 #define MX6SX_PAD_NAND_DATA07__PWM4_OUT 0x016C 0x04B4 0x0000 0x4 0x0 #define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0x016C 0x04B4 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA07__WEIM_AD_7 0x016C 0x04B4 0x0000 0x6 0x0 @@ -967,7 +983,8 @@ #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS 0x01A0 0x04E8 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_DTE_RTS 0x01A0 0x04E8 0x083C 0x1 0x4 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1 @@ -975,7 +992,8 @@ #define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14 0x01A0 0x04E8 0x0000 0x6 0x0 #define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9 0x01A0 0x04E8 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1 0x01A4 0x04EC 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B 0x01A4 0x04EC 0x083C 0x1 0x5 +#define MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS 0x01A4 0x04EC 0x083C 0x1 0x5 +#define MX6SX_PAD_QSPI1B_DATA1__UART3_DTE_CTS 0x01A4 0x04EC 0x0000 0x1 0x0 #define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO 0x01A4 0x04EC 0x0734 0x2 0x1 #define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK 0x01A4 0x04EC 0x0788 0x3 0x2 #define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21 0x01A4 0x04EC 0x06F0 0x4 0x1 @@ -1007,8 +1025,8 @@ #define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15 0x01B0 0x04F8 0x0000 0x6 0x0 #define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15 0x01B0 0x04F8 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK 0x01B4 0x04FC 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x01B4 0x04FC 0x0840 0x1 0x4 -#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX 0x01B4 0x04FC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX 0x01B4 0x04FC 0x0840 0x1 0x4 +#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX 0x01B4 0x04FC 0x0000 0x0 0x0 #define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK 0x01B4 0x04FC 0x0730 0x2 0x1 #define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK 0x01B4 0x04FC 0x0780 0x3 0x2 #define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16 0x01B4 0x04FC 0x06DC 0x4 0x1 @@ -1016,8 +1034,8 @@ #define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8 0x01B4 0x04FC 0x0000 0x6 0x0 #define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11 0x01B4 0x04FC 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B 0x01B8 0x0500 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX 0x01B8 0x0500 0x0840 0x1 0x5 -#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x01B8 0x0500 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX 0x01B8 0x0500 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX 0x01B8 0x0500 0x0840 0x1 0x5 #define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0 0x01B8 0x0500 0x073C 0x2 0x1 #define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK 0x01B8 0x0500 0x0784 0x3 0x3 #define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17 0x01B8 0x0500 0x06E0 0x4 0x1 @@ -1224,8 +1242,8 @@ #define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x0228 0x0570 0x065C 0x1 0x1 #define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS 0x0228 0x0570 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1 0x0228 0x0570 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA0__UART2_RX 0x0228 0x0570 0x0838 0x4 0x2 -#define MX6SX_PAD_SD1_DATA0__UART2_TX 0x0228 0x0570 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA0__UART2_DCE_RX 0x0228 0x0570 0x0838 0x4 0x2 +#define MX6SX_PAD_SD1_DATA0__UART2_DTE_TX 0x0228 0x0570 0x0000 0x4 0x0 #define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x0228 0x0570 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN 0x0228 0x0570 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA0__CCM_OUT2 0x0228 0x0570 0x0000 0x7 0x0 @@ -1235,8 +1253,8 @@ #define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x022C 0x0574 0x066C 0x1 0x1 #define MX6SX_PAD_SD1_DATA1__PWM4_OUT 0x022C 0x0574 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2 0x022C 0x0574 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA1__UART2_RX 0x022C 0x0574 0x0838 0x4 0x3 -#define MX6SX_PAD_SD1_DATA1__UART2_TX 0x022C 0x0574 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA1__UART2_DCE_TX 0x022C 0x0574 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA1__UART2_DTE_RX 0x022C 0x0574 0x0838 0x4 0x3 #define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3 0x022C 0x0574 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT 0x022C 0x0574 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA1__CCM_CLKO2 0x022C 0x0574 0x0000 0x7 0x0 @@ -1246,7 +1264,8 @@ #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS 0x0230 0x0578 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA2__UART2_DTE_RTS 0x0230 0x0578 0x0834 0x4 0x2 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0 @@ -1255,7 +1274,8 @@ #define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x0234 0x057C 0x0660 0x1 0x1 #define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD 0x0234 0x057C 0x065C 0x2 0x2 #define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3 0x0234 0x057C 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B 0x0234 0x057C 0x0834 0x4 0x3 +#define MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS 0x0234 0x057C 0x0834 0x4 0x3 +#define MX6SX_PAD_SD1_DATA3__UART2_DTE_CTS 0x0234 0x057C 0x0000 0x4 0x0 #define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5 0x0234 0x057C 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1 0x0234 0x057C 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY 0x0234 0x057C 0x069C 0x7 0x2 @@ -1287,8 +1307,8 @@ #define MX6SX_PAD_SD2_DATA0__I2C4_SDA 0x0240 0x0588 0x07C4 0x4 0x3 #define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8 0x0240 0x0588 0x0000 0x5 0x0 #define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3 0x0240 0x0588 0x0000 0x6 0x0 -#define MX6SX_PAD_SD2_DATA0__UART4_RX 0x0240 0x0588 0x0848 0x7 0x4 -#define MX6SX_PAD_SD2_DATA0__UART4_TX 0x0240 0x0588 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA0__UART4_DCE_RX 0x0240 0x0588 0x0848 0x7 0x4 +#define MX6SX_PAD_SD2_DATA0__UART4_DTE_TX 0x0240 0x0588 0x0000 0x7 0x0 #define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0 0x0240 0x0588 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50 0x0240 0x0588 0x0000 0x9 0x0 #define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x0244 0x058C 0x0000 0x0 0x0 @@ -1298,8 +1318,8 @@ #define MX6SX_PAD_SD2_DATA1__I2C4_SCL 0x0244 0x058C 0x07C0 0x4 0x3 #define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9 0x0244 0x058C 0x0000 0x5 0x0 #define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2 0x0244 0x058C 0x0000 0x6 0x0 -#define MX6SX_PAD_SD2_DATA1__UART4_RX 0x0244 0x058C 0x0848 0x7 0x5 -#define MX6SX_PAD_SD2_DATA1__UART4_TX 0x0244 0x058C 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA1__UART4_DCE_TX 0x0244 0x058C 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA1__UART4_DTE_RX 0x0244 0x058C 0x0848 0x7 0x5 #define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1 0x0244 0x058C 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49 0x0244 0x058C 0x0000 0x9 0x0 #define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x0248 0x0590 0x0000 0x0 0x0 @@ -1309,8 +1329,8 @@ #define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0 0x0248 0x0590 0x081C 0x4 0x2 #define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10 0x0248 0x0590 0x0000 0x5 0x0 #define MX6SX_PAD_SD2_DATA2__SPDIF_OUT 0x0248 0x0590 0x0000 0x6 0x0 -#define MX6SX_PAD_SD2_DATA2__UART6_RX 0x0248 0x0590 0x0858 0x7 0x4 -#define MX6SX_PAD_SD2_DATA2__UART6_TX 0x0248 0x0590 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA2__UART6_DCE_RX 0x0248 0x0590 0x0858 0x7 0x4 +#define MX6SX_PAD_SD2_DATA2__UART6_DTE_TX 0x0248 0x0590 0x0000 0x7 0x0 #define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2 0x0248 0x0590 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32 0x0248 0x0590 0x0000 0x9 0x0 #define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x024C 0x0594 0x0000 0x0 0x0 @@ -1320,12 +1340,13 @@ #define MX6SX_PAD_SD2_DATA3__MLB_DATA 0x024C 0x0594 0x07EC 0x4 0x2 #define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11 0x024C 0x0594 0x0000 0x5 0x0 #define MX6SX_PAD_SD2_DATA3__SPDIF_IN 0x024C 0x0594 0x0824 0x6 0x4 -#define MX6SX_PAD_SD2_DATA3__UART6_RX 0x024C 0x0594 0x0858 0x7 0x5 -#define MX6SX_PAD_SD2_DATA3__UART6_TX 0x024C 0x0594 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA3__UART6_DCE_TX 0x024C 0x0594 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA3__UART6_DTE_RX 0x024C 0x0594 0x0858 0x7 0x5 #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_DCE_CTS 0x0250 0x0598 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_DTE_RTS 0x0250 0x0598 0x0844 0x1 0x0 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0 @@ -1334,8 +1355,8 @@ #define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29 0x0250 0x0598 0x0000 0x7 0x0 #define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5 0x0250 0x0598 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x0254 0x059C 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_CMD__UART4_RX 0x0254 0x059C 0x0848 0x1 0x0 -#define MX6SX_PAD_SD3_CMD__UART4_TX 0x0254 0x059C 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CMD__UART4_DCE_TX 0x0254 0x059C 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CMD__UART4_DTE_RX 0x0254 0x059C 0x0848 0x1 0x0 #define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI 0x0254 0x059C 0x0748 0x2 0x0 #define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC 0x0254 0x059C 0x067C 0x3 0x0 #define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC 0x0254 0x059C 0x07E4 0x4 0x1 @@ -1364,7 +1385,8 @@ #define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1 0x025C 0x05A4 0x0000 0x8 0x0 #define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1 0x025C 0x05A4 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x0260 0x05A8 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B 0x0260 0x05A8 0x0844 0x1 0x1 +#define MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS 0x0260 0x05A8 0x0844 0x1 0x1 +#define MX6SX_PAD_SD3_DATA2__UART4_DTE_CTS 0x0260 0x05A8 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0 0x0260 0x05A8 0x074C 0x2 0x0 #define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS 0x0260 0x05A8 0x0688 0x3 0x0 #define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK 0x0260 0x05A8 0x0000 0x4 0x0 @@ -1374,8 +1396,8 @@ #define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2 0x0260 0x05A8 0x0000 0x8 0x0 #define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2 0x0260 0x05A8 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x0264 0x05AC 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_DATA3__UART4_RX 0x0264 0x05AC 0x0848 0x1 0x1 -#define MX6SX_PAD_SD3_DATA3__UART4_TX 0x0264 0x05AC 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_DATA3__UART4_DCE_RX 0x0264 0x05AC 0x0848 0x1 0x1 +#define MX6SX_PAD_SD3_DATA3__UART4_DTE_TX 0x0264 0x05AC 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO 0x0264 0x05AC 0x0744 0x2 0x0 #define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD 0x0264 0x05AC 0x0678 0x3 0x0 #define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE 0x0264 0x05AC 0x0000 0x4 0x0 @@ -1387,8 +1409,8 @@ #define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x0268 0x05B0 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA4__CAN2_RX 0x0268 0x05B0 0x0690 0x1 0x0 #define MX6SX_PAD_SD3_DATA4__CANFD_RX2 0x0268 0x05B0 0x0698 0x2 0x0 -#define MX6SX_PAD_SD3_DATA4__UART3_RX 0x0268 0x05B0 0x0840 0x3 0x2 -#define MX6SX_PAD_SD3_DATA4__UART3_TX 0x0268 0x05B0 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA4__UART3_DCE_RX 0x0268 0x05B0 0x0840 0x3 0x2 +#define MX6SX_PAD_SD3_DATA4__UART3_DTE_TX 0x0268 0x05B0 0x0000 0x3 0x0 #define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3 0x0268 0x05B0 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x0268 0x05B0 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN 0x0268 0x05B0 0x0000 0x6 0x0 @@ -1398,8 +1420,8 @@ #define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x026C 0x05B4 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA5__CAN1_TX 0x026C 0x05B4 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_DATA5__CANFD_TX1 0x026C 0x05B4 0x0000 0x2 0x0 -#define MX6SX_PAD_SD3_DATA5__UART3_RX 0x026C 0x05B4 0x0840 0x3 0x3 -#define MX6SX_PAD_SD3_DATA5__UART3_TX 0x026C 0x05B4 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA5__UART3_DCE_TX 0x026C 0x05B4 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA5__UART3_DTE_RX 0x026C 0x05B4 0x0840 0x3 0x3 #define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2 0x026C 0x05B4 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x026C 0x05B4 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT 0x026C 0x05B4 0x0000 0x6 0x0 @@ -1409,7 +1431,8 @@ #define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x0270 0x05B8 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA6__CAN2_TX 0x0270 0x05B8 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_DATA6__CANFD_TX2 0x0270 0x05B8 0x0000 0x2 0x0 -#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x0270 0x05B8 0x083C 0x3 0x2 +#define MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS 0x0270 0x05B8 0x083C 0x3 0x2 +#define MX6SX_PAD_SD3_DATA6__UART3_DTE_CTS 0x0270 0x05B8 0x0000 0x3 0x0 #define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4 0x0270 0x05B8 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8 0x0270 0x05B8 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT 0x0270 0x05B8 0x0000 0x6 0x0 @@ -1419,7 +1442,8 @@ #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0 -#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS 0x0274 0x05BC 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA7__UART3_DTE_RTS 0x0274 0x05BC 0x083C 0x3 0x3 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0 @@ -1488,8 +1512,8 @@ #define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS 0x028C 0x05D4 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x0290 0x05D8 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09 0x0290 0x05D8 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA4__UART5_RX 0x0290 0x05D8 0x0850 0x2 0x0 -#define MX6SX_PAD_SD4_DATA4__UART5_TX 0x0290 0x05D8 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA4__UART5_DCE_RX 0x0290 0x05D8 0x0850 0x2 0x0 +#define MX6SX_PAD_SD4_DATA4__UART5_DTE_TX 0x0290 0x05D8 0x0000 0x2 0x0 #define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK 0x0290 0x05D8 0x0730 0x3 0x0 #define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8 0x0290 0x05D8 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18 0x0290 0x05D8 0x0000 0x5 0x0 @@ -1499,8 +1523,8 @@ #define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE 0x0290 0x05D8 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x0294 0x05DC 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B 0x0294 0x05DC 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA5__UART5_RX 0x0294 0x05DC 0x0850 0x2 0x1 -#define MX6SX_PAD_SD4_DATA5__UART5_TX 0x0294 0x05DC 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA5__UART5_DCE_TX 0x0294 0x05DC 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA5__UART5_DTE_RX 0x0294 0x05DC 0x0850 0x2 0x1 #define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI 0x0294 0x05DC 0x0738 0x3 0x0 #define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7 0x0294 0x05DC 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19 0x0294 0x05DC 0x0000 0x5 0x0 @@ -1510,7 +1534,8 @@ #define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0 0x0294 0x05DC 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x0298 0x05E0 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B 0x0298 0x05E0 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B 0x0298 0x05E0 0x084C 0x2 0x0 +#define MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS 0x0298 0x05E0 0x084C 0x2 0x0 +#define MX6SX_PAD_SD4_DATA6__UART5_DTE_CTS 0x0298 0x05E0 0x0000 0x2 0x0 #define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO 0x0298 0x05E0 0x0734 0x3 0x0 #define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6 0x0298 0x05E0 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x0298 0x05E0 0x0000 0x5 0x0 @@ -1520,7 +1545,8 @@ #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS 0x029C 0x05E4 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA7__UART5_DTE_RTS 0x029C 0x05E4 0x084C 0x2 0x1 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0 @@ -1551,4 +1577,92 @@ #define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB 0x02A8 0x05F0 0x0000 0x4 0x0 #define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11 0x02A8 0x05F0 0x0000 0x5 0x0 +/* these are not supposed to be used any more and remove them after some time */ +#define MX6SX_PAD_GPIO1_IO04__UART1_RX MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX +#define MX6SX_PAD_GPIO1_IO04__UART1_TX MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX +#define MX6SX_PAD_GPIO1_IO05__UART1_RX MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX +#define MX6SX_PAD_GPIO1_IO05__UART1_TX MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX +#define MX6SX_PAD_GPIO1_IO06__UART2_RX MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX +#define MX6SX_PAD_GPIO1_IO06__UART2_TX MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX +#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS +#define MX6SX_PAD_GPIO1_IO07__UART2_RX MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX +#define MX6SX_PAD_GPIO1_IO07__UART2_TX MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX +#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS +#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS +#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS +#define MX6SX_PAD_CSI_DATA04__UART6_RX MX6SX_PAD_CSI_DATA04__UART6_DCE_RX +#define MX6SX_PAD_CSI_DATA04__UART6_TX MX6SX_PAD_CSI_DATA04__UART6_DTE_TX +#define MX6SX_PAD_CSI_DATA05__UART6_RX MX6SX_PAD_CSI_DATA05__UART6_DTE_RX +#define MX6SX_PAD_CSI_DATA05__UART6_TX MX6SX_PAD_CSI_DATA05__UART6_DCE_TX +#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS +#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS +#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS +#define MX6SX_PAD_CSI_MCLK__UART4_RX MX6SX_PAD_CSI_MCLK__UART4_DCE_RX +#define MX6SX_PAD_CSI_MCLK__UART4_TX MX6SX_PAD_CSI_MCLK__UART4_DTE_TX +#define MX6SX_PAD_CSI_PIXCLK__UART4_RX MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX +#define MX6SX_PAD_CSI_PIXCLK__UART4_TX MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX +#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS +#define MX6SX_PAD_ENET2_COL__UART1_RX MX6SX_PAD_ENET2_COL__UART1_DCE_RX +#define MX6SX_PAD_ENET2_COL__UART1_TX MX6SX_PAD_ENET2_COL__UART1_DTE_TX +#define MX6SX_PAD_ENET2_CRS__UART1_RX MX6SX_PAD_ENET2_CRS__UART1_DTE_RX +#define MX6SX_PAD_ENET2_CRS__UART1_TX MX6SX_PAD_ENET2_CRS__UART1_DCE_TX +#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS +#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS +#define MX6SX_PAD_KEY_COL0__UART6_RTS_B MX6SX_PAD_KEY_COL0__UART6_DCE_RTS +#define MX6SX_PAD_KEY_COL1__UART6_RX MX6SX_PAD_KEY_COL1__UART6_DTE_RX +#define MX6SX_PAD_KEY_COL1__UART6_TX MX6SX_PAD_KEY_COL1__UART6_DCE_TX +#define MX6SX_PAD_KEY_COL2__UART5_RTS_B MX6SX_PAD_KEY_COL2__UART5_DCE_RTS +#define MX6SX_PAD_KEY_COL3__UART5_RX MX6SX_PAD_KEY_COL3__UART5_DTE_RX +#define MX6SX_PAD_KEY_COL3__UART5_TX MX6SX_PAD_KEY_COL3__UART5_DCE_TX +#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS +#define MX6SX_PAD_KEY_ROW1__UART6_RX MX6SX_PAD_KEY_ROW1__UART6_DCE_RX +#define MX6SX_PAD_KEY_ROW1__UART6_TX MX6SX_PAD_KEY_ROW1__UART6_DTE_TX +#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS +#define MX6SX_PAD_KEY_ROW3__UART5_RX MX6SX_PAD_KEY_ROW3__UART5_DCE_RX +#define MX6SX_PAD_KEY_ROW3__UART5_TX MX6SX_PAD_KEY_ROW3__UART5_DTE_TX +#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS +#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS +#define MX6SX_PAD_NAND_DATA06__UART3_RX MX6SX_PAD_NAND_DATA06__UART3_DCE_RX +#define MX6SX_PAD_NAND_DATA06__UART3_TX MX6SX_PAD_NAND_DATA06__UART3_DTE_TX +#define MX6SX_PAD_NAND_DATA07__UART3_RX MX6SX_PAD_NAND_DATA07__UART3_DTE_RX +#define MX6SX_PAD_NAND_DATA07__UART3_TX MX6SX_PAD_NAND_DATA07__UART3_DCE_TX +#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS +#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS +#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX +#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX +#define MX6SX_PAD_SD1_DATA0__UART2_RX MX6SX_PAD_SD1_DATA0__UART2_DCE_RX +#define MX6SX_PAD_SD1_DATA0__UART2_TX MX6SX_PAD_SD1_DATA0__UART2_DTE_TX +#define MX6SX_PAD_SD1_DATA1__UART2_RX MX6SX_PAD_SD1_DATA1__UART2_DTE_RX +#define MX6SX_PAD_SD1_DATA1__UART2_TX MX6SX_PAD_SD1_DATA1__UART2_DCE_TX +#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS +#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS +#define MX6SX_PAD_SD2_DATA0__UART4_RX MX6SX_PAD_SD2_DATA0__UART4_DCE_RX +#define MX6SX_PAD_SD2_DATA0__UART4_TX MX6SX_PAD_SD2_DATA0__UART4_DTE_TX +#define MX6SX_PAD_SD2_DATA1__UART4_RX MX6SX_PAD_SD2_DATA1__UART4_DTE_RX +#define MX6SX_PAD_SD2_DATA1__UART4_TX MX6SX_PAD_SD2_DATA1__UART4_DCE_TX +#define MX6SX_PAD_SD2_DATA2__UART6_RX MX6SX_PAD_SD2_DATA2__UART6_DCE_RX +#define MX6SX_PAD_SD2_DATA2__UART6_TX MX6SX_PAD_SD2_DATA2__UART6_DTE_TX +#define MX6SX_PAD_SD2_DATA3__UART6_RX MX6SX_PAD_SD2_DATA3__UART6_DTE_RX +#define MX6SX_PAD_SD2_DATA3__UART6_TX MX6SX_PAD_SD2_DATA3__UART6_DCE_TX +#define MX6SX_PAD_SD3_CLK__UART4_CTS_B MX6SX_PAD_SD3_CLK__UART4_DCE_CTS +#define MX6SX_PAD_SD3_CMD__UART4_RX MX6SX_PAD_SD3_CMD__UART4_DTE_RX +#define MX6SX_PAD_SD3_CMD__UART4_TX MX6SX_PAD_SD3_CMD__UART4_DCE_TX +#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS +#define MX6SX_PAD_SD3_DATA3__UART4_RX MX6SX_PAD_SD3_DATA3__UART4_DCE_RX +#define MX6SX_PAD_SD3_DATA3__UART4_TX MX6SX_PAD_SD3_DATA3__UART4_DTE_TX +#define MX6SX_PAD_SD3_DATA4__UART3_RX MX6SX_PAD_SD3_DATA4__UART3_DCE_RX +#define MX6SX_PAD_SD3_DATA4__UART3_TX MX6SX_PAD_SD3_DATA4__UART3_DTE_TX +#define MX6SX_PAD_SD3_DATA5__UART3_RX MX6SX_PAD_SD3_DATA5__UART3_DTE_RX +#define MX6SX_PAD_SD3_DATA5__UART3_TX MX6SX_PAD_SD3_DATA5__UART3_DCE_TX +#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS +#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS +#define MX6SX_PAD_SD4_DATA4__UART5_RX MX6SX_PAD_SD4_DATA4__UART5_DCE_RX +#define MX6SX_PAD_SD4_DATA4__UART5_TX MX6SX_PAD_SD4_DATA4__UART5_DTE_TX +#define MX6SX_PAD_SD4_DATA5__UART5_RX MX6SX_PAD_SD4_DATA5__UART5_DTE_RX +#define MX6SX_PAD_SD4_DATA5__UART5_TX MX6SX_PAD_SD4_DATA5__UART5_DCE_TX +#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS +#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS + #endif /* __DTS_IMX6SX_PINFUNC_H */ diff --git a/sys/gnu/dts/arm/imx6sx-sabreauto.dts b/sys/gnu/dts/arm/imx6sx-sabreauto.dts index 315044ccd65f..825924448ab4 100644 --- a/sys/gnu/dts/arm/imx6sx-sabreauto.dts +++ b/sys/gnu/dts/arm/imx6sx-sabreauto.dts @@ -229,8 +229,8 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 >; }; diff --git a/sys/gnu/dts/arm/imx6sx-sdb.dtsi b/sys/gnu/dts/arm/imx6sx-sdb.dtsi index f6972deb5e39..3e5fb72f21fc 100644 --- a/sys/gnu/dts/arm/imx6sx-sdb.dtsi +++ b/sys/gnu/dts/arm/imx6sx-sdb.dtsi @@ -564,17 +564,17 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 >; }; pinctrl_uart5: uart5grp { fsl,pins = < - MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 - MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 - MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 - MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 + MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x1b0b1 + MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS 0x1b0b1 + MX6SX_PAD_KEY_COL2__UART5_DCE_RTS 0x1b0b1 >; }; diff --git a/sys/gnu/dts/arm/imx6sx-softing-vining-2000.dts b/sys/gnu/dts/arm/imx6sx-softing-vining-2000.dts index 28563f21024e..6b728b03f1f2 100644 --- a/sys/gnu/dts/arm/imx6sx-softing-vining-2000.dts +++ b/sys/gnu/dts/arm/imx6sx-softing-vining-2000.dts @@ -352,6 +352,12 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6SX_PAD_NAND_DATA02__GPIO4_IO_6 0x10b0 + >; + }; + pinctrl_pwm1: pwm1grp-1 { fsl,pins = < /* blue LED */ @@ -384,15 +390,15 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 >; }; pinctrl_uart2: uart2grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1 >; }; @@ -490,6 +496,14 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; + reset-gpio-active-high; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; diff --git a/sys/gnu/dts/arm/imx6sx-udoo-neo.dtsi b/sys/gnu/dts/arm/imx6sx-udoo-neo.dtsi index 25d4aa985a69..ee645655090d 100644 --- a/sys/gnu/dts/arm/imx6sx-udoo-neo.dtsi +++ b/sys/gnu/dts/arm/imx6sx-udoo-neo.dtsi @@ -235,28 +235,28 @@ pinctrl_uart1: uart1grp { fsl,pins = - <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>, - <MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1>; + <MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1>, + <MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1>; }; pinctrl_uart2: uart2grp { fsl,pins = - <MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1>, - <MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>; + <MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1>, + <MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1>; }; pinctrl_uart3: uart3grp { fsl,pins = - <MX6SX_PAD_SD3_DATA4__UART3_RX 0x13059>, - <MX6SX_PAD_SD3_DATA5__UART3_TX 0x13059>, - <MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x13059>, - <MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x13059>; + <MX6SX_PAD_SD3_DATA4__UART3_DCE_RX 0x13059>, + <MX6SX_PAD_SD3_DATA5__UART3_DCE_TX 0x13059>, + <MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS 0x13059>, + <MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS 0x13059>; }; pinctrl_uart5: uart5grp { fsl,pins = - <MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>, - <MX6SX_PAD_SD4_DATA5__UART5_TX 0x1b0b1>; + <MX6SX_PAD_SD4_DATA4__UART5_DCE_RX 0x1b0b1>, + <MX6SX_PAD_SD4_DATA5__UART5_DCE_TX 0x1b0b1>; }; pinctrl_uart6: uart6grp { @@ -265,10 +265,10 @@ <MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x1b0b1>, <MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x1b0b1>, <MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x1b0b1>, - <MX6SX_PAD_CSI_DATA04__UART6_RX 0x1b0b1>, - <MX6SX_PAD_CSI_DATA05__UART6_TX 0x1b0b1>, - <MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x1b0b1>, - <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>; + <MX6SX_PAD_CSI_DATA04__UART6_DCE_RX 0x1b0b1>, + <MX6SX_PAD_CSI_DATA05__UART6_DCE_TX 0x1b0b1>, + <MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS 0x1b0b1>, + <MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS 0x1b0b1>; }; pinctrl_otg1_reg: otg1grp { diff --git a/sys/gnu/dts/arm/imx6sx.dtsi b/sys/gnu/dts/arm/imx6sx.dtsi index 59bad60a47dc..d6f831731460 100644 --- a/sys/gnu/dts/arm/imx6sx.dtsi +++ b/sys/gnu/dts/arm/imx6sx.dtsi @@ -87,6 +87,8 @@ "pll1_sw", "pll1_sys"; arm-supply = <®_arm>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; }; @@ -235,7 +237,7 @@ status = "disabled"; }; - aips1: aips-bus@2000000 { + aips1: bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -466,7 +468,7 @@ status = "disabled"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt"; reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -559,7 +561,7 @@ gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>; }; - kpp: kpp@20b8000 { + kpp: keypad@20b8000 { compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -567,14 +569,14 @@ status = "disabled"; }; - wdog1: wdog@20bc000 { + wdog1: watchdog@20bc000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_IPG>; }; - wdog2: wdog@20c0000 { + wdog2: watchdog@20c0000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -582,7 +584,7 @@ status = "disabled"; }; - clks: ccm@20c4000 { + clks: clock-controller@20c4000 { compatible = "fsl,imx6sx-ccm"; reg = <0x020c4000 0x4000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, @@ -806,7 +808,7 @@ }; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6sx-iomuxc"; reg = <0x020e0000 0x4000>; }; @@ -830,14 +832,14 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - crypto: caam@2100000 { + crypto: crypto@2100000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; @@ -850,13 +852,13 @@ <&clks IMX6SX_CLK_EIM_SLOW>; clock-names = "mem", "aclk", "ipg", "emi_slow"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -1051,13 +1053,17 @@ status = "disabled"; }; - ocotp: ocotp@21bc000 { + ocotp: ocotp-ctrl@21bc000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx6sx-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SX_CLK_OCOTP>; + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; + tempmon_calib: calib@38 { reg = <0x38 4>; }; @@ -1188,7 +1194,7 @@ }; }; - aips3: aips-bus@2200000 { + aips3: bus@2200000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -1289,7 +1295,7 @@ status = "disabled"; }; - wdog3: wdog@2288000 { + wdog3: watchdog@2288000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x02288000 0x4000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; diff --git a/sys/gnu/dts/arm/imx6ul-ccimx6ulsbcpro.dts b/sys/gnu/dts/arm/imx6ul-ccimx6ulsbcpro.dts index 3749fdda3611..5d3805b07032 100644 --- a/sys/gnu/dts/arm/imx6ul-ccimx6ulsbcpro.dts +++ b/sys/gnu/dts/arm/imx6ul-ccimx6ulsbcpro.dts @@ -25,7 +25,7 @@ }; panel { - compatible = "auo,g101evn010", "simple-panel"; + compatible = "auo,g101evn010"; power-supply = <&ldo4_ext>; backlight = <&lcd_backlight>; diff --git a/sys/gnu/dts/arm/imx6ul-pico-dwarf.dts b/sys/gnu/dts/arm/imx6ul-pico-dwarf.dts new file mode 100644 index 000000000000..162dc259edc8 --- /dev/null +++ b/sys/gnu/dts/arm/imx6ul-pico-dwarf.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> +/dts-v1/; + +#include "imx6ul-pico.dtsi" +/ { + model = "TechNexion PICO-IMX6UL and DWARF baseboard"; + compatible = "technexion,imx6ul-pico-dwarf", "fsl,imx6ul"; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6ul-sgtl5000"; + audio-cpu = <&sai1>; + audio-codec = <&sgtl5000>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; + + sys_mclk: clock-sys-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: audio-codec@a { + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&sys_mclk>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; +}; diff --git a/sys/gnu/dts/arm/imx6ul-pico.dtsi b/sys/gnu/dts/arm/imx6ul-pico.dtsi index de9f83189ba8..df1da98ab10f 100644 --- a/sys/gnu/dts/arm/imx6ul-pico.dtsi +++ b/sys/gnu/dts/arm/imx6ul-pico.dtsi @@ -20,7 +20,7 @@ stdout-path = &uart6; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm3 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -72,6 +72,17 @@ regulator-max-microvolt = <3300000>; startup-delay-us = <200000>; }; + + panel { + compatible = "vxt,vl050-8048nt-c01"; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; }; &can1 { @@ -154,31 +165,11 @@ &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; - display = <&display0>; status = "okay"; - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - - timing0: timing0 { - clock-frequency = <33200000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <210>; - hback-porch = <46>; - hsync-len = <1>; - vback-porch = <22>; - vfront-porch = <23>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/sys/gnu/dts/arm/imx6ul.dtsi b/sys/gnu/dts/arm/imx6ul.dtsi index d9fdca12819b..2ccf67c4ac1a 100644 --- a/sys/gnu/dts/arm/imx6ul.dtsi +++ b/sys/gnu/dts/arm/imx6ul.dtsi @@ -204,7 +204,7 @@ status = "disabled"; }; - aips1: aips-bus@2000000 { + aips1: bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -430,7 +430,7 @@ status = "disabled"; }; - gpt1: gpt@2098000 { + gpt1: timer@2098000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -523,7 +523,7 @@ status = "disabled"; }; - kpp: kpp@20b8000 { + kpp: keypad@20b8000 { compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -531,14 +531,14 @@ status = "disabled"; }; - wdog1: wdog@20bc000 { + wdog1: watchdog@20bc000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_WDOG1>; }; - wdog2: wdog@20c0000 { + wdog2: watchdog@20c0000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -546,7 +546,7 @@ status = "disabled"; }; - clks: ccm@20c4000 { + clks: clock-controller@20c4000 { compatible = "fsl,imx6ul-ccm"; reg = <0x020c4000 0x4000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, @@ -693,7 +693,7 @@ interrupt-parent = <&intc>; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6ul-iomuxc"; reg = <0x020e0000 0x4000>; }; @@ -704,7 +704,7 @@ reg = <0x020e4000 0x4000>; }; - gpt2: gpt@20e8000 { + gpt2: timer@20e8000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x020e8000 0x4000>; interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; @@ -771,14 +771,14 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - crypto: caam@2140000 { + crypto: crypto@2140000 { compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; @@ -789,19 +789,19 @@ <&clks IMX6UL_CLK_CAAM_MEM>; clock-names = "ipg", "aclk", "mem"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr2: jr2@3000 { + sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; @@ -1007,7 +1007,7 @@ status = "disabled"; }; - wdog3: wdog@21e4000 { + wdog3: watchdog@21e4000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x021e4000 0x4000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; diff --git a/sys/gnu/dts/arm/imx6ull.dtsi b/sys/gnu/dts/arm/imx6ull.dtsi index b7e67d121322..fcde7f77ae42 100644 --- a/sys/gnu/dts/arm/imx6ull.dtsi +++ b/sys/gnu/dts/arm/imx6ull.dtsi @@ -51,7 +51,7 @@ / { soc { - aips3: aips-bus@2200000 { + aips3: bus@2200000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/sys/gnu/dts/arm/imx7-colibri-aster.dtsi b/sys/gnu/dts/arm/imx7-colibri-aster.dtsi new file mode 100644 index 000000000000..9fa701bec2ec --- /dev/null +++ b/sys/gnu/dts/arm/imx7-colibri-aster.dtsi @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2020 Toradex AG + * + */ + + +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + panel: panel { + compatible = "edt,et057090dhu"; + backlight = <&bl>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&adc1 { + status = "okay"; +}; + +/* + * ADC2 is not available on the Aster board and + * conflicts with AD7879 resistive touchscreen. + */ +&adc2 { + status = "disabled"; +}; + +&bl { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <®_3v3>; + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + /* Microchip/Atmel maxtouch controller */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiotouch>; + reg = <0x4a>; + interrupt-parent = <&gpio2>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 */ + reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* SODIMM 106 */ + }; + + /* M41T0M6 real time clock on carrier board */ + rtc: m41t0m6@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl_gpiotouch: touchgpios { + fsl,pins = < + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 + >; + }; +}; + +&lcdif { + status = "okay"; + + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usdhc1 { + keep-power-in-suspend; + no-1-8-v; + wakeup-source; + vmmc-supply = <®_3v3>; + status = "okay"; +}; diff --git a/sys/gnu/dts/arm/imx7-colibri-eval-v3.dtsi b/sys/gnu/dts/arm/imx7-colibri-eval-v3.dtsi index 6aa123cbdadb..97601375f264 100644 --- a/sys/gnu/dts/arm/imx7-colibri-eval-v3.dtsi +++ b/sys/gnu/dts/arm/imx7-colibri-eval-v3.dtsi @@ -1,46 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ / { + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + chosen { stdout-path = "serial0:115200n8"; }; diff --git a/sys/gnu/dts/arm/imx7-colibri.dtsi b/sys/gnu/dts/arm/imx7-colibri.dtsi index 04717cf69db0..e18e89dec879 100644 --- a/sys/gnu/dts/arm/imx7-colibri.dtsi +++ b/sys/gnu/dts/arm/imx7-colibri.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ / { @@ -130,6 +93,184 @@ status = "disabled"; }; +&gpio1 { + gpio-line-names = "SODIMM_43", + "SODIMM_45", + "SODIMM_135", + "SODIMM_22", + "", + "", + "SODIMM_37", + "SODIMM_29", + "SODIMM_59", + "SODIMM_28", + "SODIMM_30", + "SODIMM_67", + "", + "", + "SODIMM_188", + "SODIMM_178"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_111", + "SODIMM_113", + "SODIMM_115", + "SODIMM_117", + "SODIMM_119", + "SODIMM_121", + "SODIMM_123", + "SODIMM_125", + "SODIMM_91", + "SODIMM_89", + "SODIMM_105", + "SODIMM_152", + "SODIMM_150", + "SODIMM_95", + "SODIMM_126", + "SODIMM_107", + "SODIMM_114", + "SODIMM_116", + "SODIMM_118", + "SODIMM_120", + "SODIMM_122", + "SODIMM_124", + "SODIMM_127", + "SODIMM_130", + "SODIMM_132", + "SODIMM_134", + "SODIMM_133", + "SODIMM_104", + "SODIMM_106", + "SODIMM_110", + "SODIMM_112", + "SODIMM_128"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "SODIMM_93", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_136", + "SODIMM_138", + "SODIMM_140", + "SODIMM_142", + "SODIMM_144", + "SODIMM_146"; +}; + +&gpio4 { + gpio-line-names = "SODIMM_35", + "SODIMM_33", + "SODIMM_38", + "SODIMM_36", + "SODIMM_21", + "SODIMM_19", + "SODIMM_131", + "SODIMM_129", + "SODIMM_90", + "SODIMM_92", + "SODIMM_88", + "SODIMM_86", + "SODIMM_81", + "SODIMM_94", + "SODIMM_96", + "SODIMM_75", + "SODIMM_101", + "SODIMM_103", + "SODIMM_79", + "SODIMM_97", + "SODIMM_67", + "SODIMM_59", + "SODIMM_85", + "SODIMM_65"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_69", + "SODIMM_71", + "SODIMM_73", + "SODIMM_47", + "SODIMM_190", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53", + "", + "", + "SODIMM_98", + "SODIMM_184", + "SODIMM_186", + "SODIMM_23", + "SODIMM_31", + "SODIMM_100", + "SODIMM_102"; +}; + +&gpio6 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_169", + "", + "", + "", + "SODIMM_77", + "SODIMM_24", + "", + "SODIMM_25", + "SODIMM_27", + "SODIMM_32", + "SODIMM_34"; +}; + +&gpio7 { + gpio-line-names = "", + "", + "SODIMM_63", + "SODIMM_55", + "", + "", + "", + "", + "SODIMM_196", + "SODIMM_194", + "", + "SODIMM_99", + "", + "", + "SODIMM_137"; +}; + &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; @@ -345,7 +486,7 @@ &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4 - &pinctrl_gpio7>; + &pinctrl_gpio7 &pinctrl_usbc_det>; pinctrl_gpio1: gpio1-grp { fsl,pins = < @@ -356,7 +497,6 @@ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */ MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x74 /* SODIMM 105 */ - MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 /* SODIMM 107 */ MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */ MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */ @@ -373,7 +513,6 @@ MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */ MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */ MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */ - MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x74 /* SODIMM 106 */ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */ MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */ @@ -450,7 +589,6 @@ pinctrl_enet1: enet1grp { fsl,pins = < - MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73 MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x73 MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x73 @@ -648,6 +786,12 @@ >; }; + pinctrl_usbc_det: gpio-usbc-det { + fsl,pins = < + MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 + >; + }; + pinctrl_usbh_reg: gpio-usbh-vbus { fsl,pins = < MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */ diff --git a/sys/gnu/dts/arm/imx7d-cl-som-imx7.dts b/sys/gnu/dts/arm/imx7d-cl-som-imx7.dts index 7646284e13a7..89267cd59037 100644 --- a/sys/gnu/dts/arm/imx7d-cl-som-imx7.dts +++ b/sys/gnu/dts/arm/imx7d-cl-som-imx7.dts @@ -85,12 +85,12 @@ pmic: pmic@8 { compatible = "fsl,pfuze3000"; - reg = <0x08>; + reg = <0x8>; regulators { sw1a_reg: sw1a { regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1475000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; diff --git a/sys/gnu/dts/arm/imx7d-colibri-aster.dts b/sys/gnu/dts/arm/imx7d-colibri-aster.dts new file mode 100644 index 000000000000..f3f0537d5a37 --- /dev/null +++ b/sys/gnu/dts/arm/imx7d-colibri-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2020 Toradex AG + * + */ + +/dts-v1/; +#include "imx7d-colibri.dtsi" +#include "imx7-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX7D on Aster Carrier Board"; + compatible = "toradex,colibri-imx7d-aster", "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; diff --git a/sys/gnu/dts/arm/imx7d-colibri-emmc-aster.dts b/sys/gnu/dts/arm/imx7d-colibri-emmc-aster.dts new file mode 100644 index 000000000000..20480276cb0e --- /dev/null +++ b/sys/gnu/dts/arm/imx7d-colibri-emmc-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2020 Toradex AG + * + */ + +/dts-v1/; +#include "imx7d-colibri-emmc.dtsi" +#include "imx7-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board"; + compatible = "toradex,colibri-imx7d-emmc-aster", + "toradex,colibri-imx7d-emmc", "fsl,imx7d"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; diff --git a/sys/gnu/dts/arm/imx7d-colibri-emmc.dtsi b/sys/gnu/dts/arm/imx7d-colibri-emmc.dtsi index 898f4b8d7421..af39e5370fa1 100644 --- a/sys/gnu/dts/arm/imx7d-colibri-emmc.dtsi +++ b/sys/gnu/dts/arm/imx7d-colibri-emmc.dtsi @@ -13,6 +13,32 @@ }; }; +&gpio6 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_169", + "SODIMM_157", + "", + "SODIMM_163", + "SODIMM_77", + "SODIMM_24", + "", + "SODIMM_25", + "SODIMM_27", + "SODIMM_32", + "SODIMM_34"; +}; + &usbotg2 { dr_mode = "host"; }; diff --git a/sys/gnu/dts/arm/imx7d-colibri-eval-v3.dts b/sys/gnu/dts/arm/imx7d-colibri-eval-v3.dts index 136e11ab4893..87b132bcd272 100644 --- a/sys/gnu/dts/arm/imx7d-colibri-eval-v3.dts +++ b/sys/gnu/dts/arm/imx7d-colibri-eval-v3.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ /dts-v1/; diff --git a/sys/gnu/dts/arm/imx7d-colibri.dtsi b/sys/gnu/dts/arm/imx7d-colibri.dtsi index e2e327f437e3..c59d72e50920 100644 --- a/sys/gnu/dts/arm/imx7d-colibri.dtsi +++ b/sys/gnu/dts/arm/imx7d-colibri.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ #include "imx7d.dtsi" diff --git a/sys/gnu/dts/arm/imx7d-pico-dwarf.dts b/sys/gnu/dts/arm/imx7d-pico-dwarf.dts new file mode 100644 index 000000000000..5162fe227d1e --- /dev/null +++ b/sys/gnu/dts/arm/imx7d-pico-dwarf.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> +/dts-v1/; + +#include "imx7d-pico.dtsi" +/ { + model = "TechNexion PICO-IMX7D and DWARF baseboard"; + compatible = "technexion,imx7d-pico-dwarf", "fsl,imx7d"; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx7d-sgtl5000"; + audio-cpu = <&sai1>; + audio-codec = <&sgtl5000>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; + + sys_mclk: clock-sys-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&i2c1 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: audio-codec@a { + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&sys_mclk>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; +}; + +&i2c4 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9554: io-expander@25 { + compatible = "nxp,pca9554"; + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + reg = <0x25>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio2>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pca9554 4 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; +}; + +&iomuxc { + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 + >; + }; +}; diff --git a/sys/gnu/dts/arm/imx7d-pico-nymph.dts b/sys/gnu/dts/arm/imx7d-pico-nymph.dts new file mode 100644 index 000000000000..104a85254adb --- /dev/null +++ b/sys/gnu/dts/arm/imx7d-pico-nymph.dts @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> +/dts-v1/; + +#include "imx7d-pico.dtsi" +/ { + model = "TechNexion PICO-IMX7 and NYMPH baseboard"; + compatible = "technexion,imx7d-pico-nymph", "fsl,imx7d"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx7d-sgtl5000"; + audio-cpu = <&sai1>; + audio-codec = <&sgtl5000>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; + + sys_mclk: clock-sys-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&i2c1 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: audio-codec@a { + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&sys_mclk>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + adc@52 { + compatible = "ti,adc081c"; + reg = <0x52>; + vref-supply = <®_2p5v>; + }; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 + >; + }; +}; diff --git a/sys/gnu/dts/arm/imx7s-colibri-aster.dts b/sys/gnu/dts/arm/imx7s-colibri-aster.dts new file mode 100644 index 000000000000..fca4e0a95c1b --- /dev/null +++ b/sys/gnu/dts/arm/imx7s-colibri-aster.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2020 Toradex AG + * + */ + +/dts-v1/; +#include "imx7s-colibri.dtsi" +#include "imx7-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX7S on Aster Carrier Board"; + compatible = "toradex,colibri-imx7s-aster", "toradex,colibri-imx7s", + "fsl,imx7s"; +}; diff --git a/sys/gnu/dts/arm/imx7s-colibri-eval-v3.dts b/sys/gnu/dts/arm/imx7s-colibri-eval-v3.dts index bd2a49c1ade6..aa70d3f2e2e2 100644 --- a/sys/gnu/dts/arm/imx7s-colibri-eval-v3.dts +++ b/sys/gnu/dts/arm/imx7s-colibri-eval-v3.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ /dts-v1/; diff --git a/sys/gnu/dts/arm/imx7s-colibri.dtsi b/sys/gnu/dts/arm/imx7s-colibri.dtsi index 6d16e32aed89..94de220a5965 100644 --- a/sys/gnu/dts/arm/imx7s-colibri.dtsi +++ b/sys/gnu/dts/arm/imx7s-colibri.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ #include "imx7s.dtsi" diff --git a/sys/gnu/dts/arm/imx7s.dtsi b/sys/gnu/dts/arm/imx7s.dtsi index 568d7a984aa6..76e3ffbbbfbf 100644 --- a/sys/gnu/dts/arm/imx7s.dtsi +++ b/sys/gnu/dts/arm/imx7s.dtsi @@ -315,7 +315,7 @@ <0x31006000 0x2000>; }; - aips1: aips-bus@30000000 { + aips1: bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -406,14 +406,14 @@ gpio-ranges = <&iomuxc 0 139 16>; }; - wdog1: wdog@30280000 { + wdog1: watchdog@30280000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; }; - wdog2: wdog@30290000 { + wdog2: watchdog@30290000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x30290000 0x10000>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; @@ -421,7 +421,7 @@ status = "disabled"; }; - wdog3: wdog@302a0000 { + wdog3: watchdog@302a0000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x302a0000 0x10000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -429,7 +429,7 @@ status = "disabled"; }; - wdog4: wdog@302b0000 { + wdog4: watchdog@302b0000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x302b0000 0x10000>; interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; @@ -443,7 +443,7 @@ fsl,input-sel = <&iomuxc>; }; - gpt1: gpt@302d0000 { + gpt1: timer@302d0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302d0000 0x10000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -452,7 +452,7 @@ clock-names = "ipg", "per"; }; - gpt2: gpt@302e0000 { + gpt2: timer@302e0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302e0000 0x10000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; @@ -462,7 +462,7 @@ status = "disabled"; }; - gpt3: gpt@302f0000 { + gpt3: timer@302f0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302f0000 0x10000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; @@ -472,7 +472,7 @@ status = "disabled"; }; - gpt4: gpt@30300000 { + gpt4: timer@30300000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x30300000 0x10000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; @@ -482,7 +482,7 @@ status = "disabled"; }; - kpp: kpp@30320000 { + kpp: keypad@30320000 { compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp"; reg = <0x30320000 0x10000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; @@ -490,7 +490,7 @@ status = "disabled"; }; - iomuxc: iomuxc@30330000 { + iomuxc: pinctrl@30330000 { compatible = "fsl,imx7d-iomuxc"; reg = <0x30330000 0x10000>; }; @@ -606,13 +606,15 @@ compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_SNVS_CLK>; + clock-names = "snvs-pwrkey"; linux,keycode = <KEY_POWER>; wakeup-source; status = "disabled"; }; }; - clks: ccm@30380000 { + clks: clock-controller@30380000 { compatible = "fsl,imx7d-ccm"; reg = <0x30380000 0x10000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, @@ -663,7 +665,7 @@ }; }; - aips2: aips-bus@30400000 { + aips2: bus@30400000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -803,7 +805,7 @@ }; }; - aips3: aips-bus@30800000 { + aips3: bus@30800000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -932,7 +934,7 @@ }; }; - crypto: caam@30900000 { + crypto: crypto@30900000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; @@ -943,19 +945,19 @@ <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; clock-names = "ipg", "aclk"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr2: jr1@3000 { + sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; diff --git a/sys/gnu/dts/arm/imx7ulp-evk.dts b/sys/gnu/dts/arm/imx7ulp-evk.dts index a863a2b337d6..eff51e113db4 100644 --- a/sys/gnu/dts/arm/imx7ulp-evk.dts +++ b/sys/gnu/dts/arm/imx7ulp-evk.dts @@ -72,7 +72,7 @@ srp-disable; hnp-disable; adp-disable; - over-current-active-low; + disable-over-current; status = "okay"; }; @@ -110,7 +110,6 @@ pinctrl_usbotg1_id: otg1idgrp { fsl,pins = < IMX7ULP_PAD_PTC13__USB0_ID 0x10003 - IMX7ULP_PAD_PTC16__USB1_OC2 0x10003 >; }; diff --git a/sys/gnu/dts/arm/imx7ulp.dtsi b/sys/gnu/dts/arm/imx7ulp.dtsi index ab91c98f2124..f7c4878534c8 100644 --- a/sys/gnu/dts/arm/imx7ulp.dtsi +++ b/sys/gnu/dts/arm/imx7ulp.dtsi @@ -132,13 +132,13 @@ <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; clock-names = "aclk", "ipg"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; diff --git a/sys/gnu/dts/arm/integratorap.dts b/sys/gnu/dts/arm/integratorap.dts index 94d2ff9836d0..198d66181c50 100644 --- a/sys/gnu/dts/arm/integratorap.dts +++ b/sys/gnu/dts/arm/integratorap.dts @@ -9,7 +9,6 @@ / { model = "ARM Integrator/AP"; compatible = "arm,integrator-ap"; - dma-ranges = <0x80000000 0x0 0x80000000>; cpus { #address-cells = <1>; diff --git a/sys/gnu/dts/arm/iwg20d-q7-dbcm-ca.dtsi b/sys/gnu/dts/arm/iwg20d-q7-dbcm-ca.dtsi index ede2e0c999b1..e10f99278c77 100644 --- a/sys/gnu/dts/arm/iwg20d-q7-dbcm-ca.dtsi +++ b/sys/gnu/dts/arm/iwg20d-q7-dbcm-ca.dtsi @@ -72,8 +72,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/sys/gnu/dts/arm/mmp2-brownstone.dts b/sys/gnu/dts/arm/mmp2-brownstone.dts index aaedc4c742ea..04f1ae1382e7 100644 --- a/sys/gnu/dts/arm/mmp2-brownstone.dts +++ b/sys/gnu/dts/arm/mmp2-brownstone.dts @@ -19,176 +19,174 @@ device_type = "memory"; reg = <0x00000000 0x08000000>; }; +}; + +&uart3 { + status = "okay"; +}; - soc { - apb@d4000000 { - uart3: uart@d4018000 { - status = "okay"; - }; - twsi1: i2c@d4011000 { - status = "okay"; - pmic: max8925@3c { - compatible = "maxium,max8925"; - reg = <0x3c>; - interrupts = <1>; - interrupt-parent = <&intcmux4>; - interrupt-controller; - #interrupt-cells = <1>; - maxim,tsc-irq = <0>; +&twsi1 { + status = "okay"; + pmic: max8925@3c { + compatible = "maxium,max8925"; + reg = <0x3c>; + interrupts = <1>; + interrupt-parent = <&intcmux4>; + interrupt-controller; + #interrupt-cells = <1>; + maxim,tsc-irq = <0>; - regulators { - SDV1 { - regulator-min-microvolt = <637500>; - regulator-max-microvolt = <1425000>; - regulator-boot-on; - regulator-always-on; - }; - SDV2 { - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <2225000>; - regulator-boot-on; - regulator-always-on; - }; - SDV3 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO1 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO2 { - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <2250000>; - regulator-boot-on; - regulator-always-on; - }; - LDO3 { - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <2250000>; - regulator-boot-on; - regulator-always-on; - }; - LDO4 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO5 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO6 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO7 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO8 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO9 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO10 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - }; - LDO11 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO12 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO13 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO14 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO15 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO16 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO17 { - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <2250000>; - regulator-boot-on; - regulator-always-on; - }; - LDO18 { - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <2250000>; - regulator-boot-on; - regulator-always-on; - }; - LDO19 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO20 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - }; - backlight { - maxim,max8925-dual-string = <0>; - }; - charger { - batt-detect = <0>; - topoff-threshold = <1>; - fast-charge = <7>; - no-temp-support = <0>; - no-insert-detect = <0>; - }; - }; - }; - rtc: rtc@d4010000 { - status = "okay"; + regulators { + SDV1 { + regulator-min-microvolt = <637500>; + regulator-max-microvolt = <1425000>; + regulator-boot-on; + regulator-always-on; + }; + SDV2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2225000>; + regulator-boot-on; + regulator-always-on; + }; + SDV3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO3 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO4 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO5 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO6 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO7 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO8 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO9 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO10 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; }; + LDO11 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO12 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO13 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO14 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO15 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO16 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO17 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO18 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO19 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO20 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + }; + backlight { + maxim,max8925-dual-string = <0>; + }; + charger { + batt-detect = <0>; + topoff-threshold = <1>; + fast-charge = <7>; + no-temp-support = <0>; + no-insert-detect = <0>; }; }; }; + +&rtc { + status = "okay"; +}; diff --git a/sys/gnu/dts/arm/mmp2.dtsi b/sys/gnu/dts/arm/mmp2.dtsi index 6a2f072c1d0a..da10567b5aca 100644 --- a/sys/gnu/dts/arm/mmp2.dtsi +++ b/sys/gnu/dts/arm/mmp2.dtsi @@ -208,8 +208,8 @@ clocks = <&soc_clocks MMP2_CLK_TIMER>; }; - uart1: uart@d4030000 { - compatible = "mrvl,mmp-uart"; + uart1: serial@d4030000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4030000 0x1000>; interrupts = <27>; clocks = <&soc_clocks MMP2_CLK_UART0>; @@ -218,8 +218,8 @@ status = "disabled"; }; - uart2: uart@d4017000 { - compatible = "mrvl,mmp-uart"; + uart2: serial@d4017000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4017000 0x1000>; interrupts = <28>; clocks = <&soc_clocks MMP2_CLK_UART1>; @@ -228,8 +228,8 @@ status = "disabled"; }; - uart3: uart@d4018000 { - compatible = "mrvl,mmp-uart"; + uart3: serial@d4018000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4018000 0x1000>; interrupts = <24>; clocks = <&soc_clocks MMP2_CLK_UART2>; @@ -238,8 +238,8 @@ status = "disabled"; }; - uart4: uart@d4016000 { - compatible = "mrvl,mmp-uart"; + uart4: serial@d4016000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4016000 0x1000>; interrupts = <46>; clocks = <&soc_clocks MMP2_CLK_UART3>; diff --git a/sys/gnu/dts/arm/mmp3-dell-ariel.dts b/sys/gnu/dts/arm/mmp3-dell-ariel.dts index 15449c72c042..b0ec14c42164 100644 --- a/sys/gnu/dts/arm/mmp3-dell-ariel.dts +++ b/sys/gnu/dts/arm/mmp3-dell-ariel.dts @@ -98,19 +98,19 @@ status = "okay"; }; -&ssp3 { +&ssp1 { status = "okay"; - cs-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; firmware-flash@0 { - compatible = "st,m25p80", "jedec,spi-nor"; + compatible = "winbond,w25q32", "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <40000000>; + spi-max-frequency = <104000000>; m25p,fast-read; }; }; -&ssp4 { - cs-gpios = <&gpio 56 GPIO_ACTIVE_HIGH>; +&ssp2 { + cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/sys/gnu/dts/arm/mmp3.dtsi b/sys/gnu/dts/arm/mmp3.dtsi index 59a108e49b41..826f0a577859 100644 --- a/sys/gnu/dts/arm/mmp3.dtsi +++ b/sys/gnu/dts/arm/mmp3.dtsi @@ -202,8 +202,7 @@ }; hsic_phy0: hsic-phy@f0001800 { - compatible = "marvell,mmp3-hsic-phy", - "usb-nop-xceiv"; + compatible = "marvell,mmp3-hsic-phy"; reg = <0xf0001800 0x40>; #phy-cells = <0>; status = "disabled"; @@ -224,8 +223,7 @@ }; hsic_phy1: hsic-phy@f0002800 { - compatible = "marvell,mmp3-hsic-phy", - "usb-nop-xceiv"; + compatible = "marvell,mmp3-hsic-phy"; reg = <0xf0002800 0x40>; #phy-cells = <0>; status = "disabled"; @@ -318,8 +316,8 @@ clocks = <&soc_clocks MMP2_CLK_TIMER>; }; - uart1: uart@d4030000 { - compatible = "mrvl,mmp-uart"; + uart1: serial@d4030000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4030000 0x1000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_UART0>; @@ -328,8 +326,8 @@ status = "disabled"; }; - uart2: uart@d4017000 { - compatible = "mrvl,mmp-uart"; + uart2: serial@d4017000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4017000 0x1000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_UART1>; @@ -338,8 +336,8 @@ status = "disabled"; }; - uart3: uart@d4018000 { - compatible = "mrvl,mmp-uart"; + uart3: serial@d4018000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4018000 0x1000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_UART2>; @@ -348,8 +346,8 @@ status = "disabled"; }; - uart4: uart@d4016000 { - compatible = "mrvl,mmp-uart"; + uart4: serial@d4016000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4016000 0x1000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_UART3>; @@ -531,7 +529,7 @@ }; soc_clocks: clocks@d4050000 { - compatible = "marvell,mmp2-clock"; + compatible = "marvell,mmp3-clock"; reg = <0xd4050000 0x1000>, <0xd4282800 0x400>, <0xd4015000 0x1000>; diff --git a/sys/gnu/dts/arm/motorola-mapphone-common.dtsi b/sys/gnu/dts/arm/motorola-mapphone-common.dtsi index 9067e0ef4240..06fbffa81636 100644 --- a/sys/gnu/dts/arm/motorola-mapphone-common.dtsi +++ b/sys/gnu/dts/arm/motorola-mapphone-common.dtsi @@ -367,6 +367,8 @@ }; &mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; vmmc-supply = <&wl12xx_vmmc>; /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH @@ -472,6 +474,37 @@ >; }; + /* + * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3 + * for gpio_100, but the internal pull makes wlan flakey on some + * devices. Off mode value should be tested if we have off mode working + * later on. + */ + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + /* 0x4a10008e gpmc_wait2.gpio_100 d23 */ + OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3) + + /* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */ + OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */ + OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */ + OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1) + + /* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */ + OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */ + OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; + /* gpmc_ncs0.gpio_50 */ poweroff_gpio: pinmux_poweroff_pins { pinctrl-single,pins = < @@ -690,14 +723,18 @@ }; /* - * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for - * uart1 wakeirq. + * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149 + * for wake-up events for both the USB PHY and the UART. We can use gpio_149 + * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we + * have gpio_149 trigger before the UART transfer starts. */ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core 0xfc>; + &omap4_pmx_core 0x110>; + uart-has-rtscts; + current-speed = <115200>; }; &uart3 { diff --git a/sys/gnu/dts/arm/mt2701.dtsi b/sys/gnu/dts/arm/mt2701.dtsi index 51e1305c6471..2093b38d6e6d 100644 --- a/sys/gnu/dts/arm/mt2701.dtsi +++ b/sys/gnu/dts/arm/mt2701.dtsi @@ -148,7 +148,7 @@ reg = <0 0x10005000 0 0x1000>; }; - scpsys: scpsys@10006000 { + scpsys: power-controller@10006000 { compatible = "mediatek,mt2701-scpsys", "syscon"; #power-domain-cells = <1>; reg = <0 0x10006000 0 0x1000>; diff --git a/sys/gnu/dts/arm/mt7623.dtsi b/sys/gnu/dts/arm/mt7623.dtsi index a79f0b6c3429..f76b4a3c34b9 100644 --- a/sys/gnu/dts/arm/mt7623.dtsi +++ b/sys/gnu/dts/arm/mt7623.dtsi @@ -268,7 +268,7 @@ reg = <0 0x10005000 0 0x1000>; }; - scpsys: scpsys@10006000 { + scpsys: power-controller@10006000 { compatible = "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys", "syscon"; diff --git a/sys/gnu/dts/arm/mt7629.dtsi b/sys/gnu/dts/arm/mt7629.dtsi index 867b88103b9d..5cbb3d244c75 100644 --- a/sys/gnu/dts/arm/mt7629.dtsi +++ b/sys/gnu/dts/arm/mt7629.dtsi @@ -90,7 +90,7 @@ #clock-cells = <1>; }; - scpsys: scpsys@10006000 { + scpsys: power-controller@10006000 { compatible = "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys"; #power-domain-cells = <1>; @@ -241,6 +241,20 @@ status = "disabled"; }; + pwm: pwm@11006000 { + compatible = "mediatek,mt7629-pwm"; + reg = <0x11006000 0x1000>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&pericfg CLK_PERI_PWM_PD>, + <&pericfg CLK_PERI_PWM1_PD>; + clock-names = "top", "main", "pwm1"; + assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>; + assigned-clock-parents = + <&topckgen CLK_TOP_UNIVPLL2_D4>; + status = "disabled"; + }; + i2c: i2c@11007000 { compatible = "mediatek,mt7629-i2c", "mediatek,mt2712-i2c"; diff --git a/sys/gnu/dts/arm/omap3-n950-n9.dtsi b/sys/gnu/dts/arm/omap3-n950-n9.dtsi index a075b63f3087..11d41e86f814 100644 --- a/sys/gnu/dts/arm/omap3-n950-n9.dtsi +++ b/sys/gnu/dts/arm/omap3-n950-n9.dtsi @@ -341,6 +341,11 @@ status = "disabled"; }; +/* RNG not directly accessible on N950/N9. */ +&rng_target { + status = "disabled"; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; diff --git a/sys/gnu/dts/arm/omap4-l4.dtsi b/sys/gnu/dts/arm/omap4-l4.dtsi index 459fd7027591..ef59e4e97d7c 100644 --- a/sys/gnu/dts/arm/omap4-l4.dtsi +++ b/sys/gnu/dts/arm/omap4-l4.dtsi @@ -1529,6 +1529,7 @@ }; }; + /* Unused DSS L4 access, see L3 instead */ target-module@40000 { /* 0x48040000, ap 13 0a.0 */ compatible = "ti,sysc"; status = "disabled"; diff --git a/sys/gnu/dts/arm/omap4.dtsi b/sys/gnu/dts/arm/omap4.dtsi index 9a87440d0b9d..763bdea8c829 100644 --- a/sys/gnu/dts/arm/omap4.dtsi +++ b/sys/gnu/dts/arm/omap4.dtsi @@ -108,7 +108,6 @@ dsp { compatible = "ti,omap3-c64"; - ti,hwmods = "dsp"; }; iva { @@ -415,87 +414,213 @@ */ }; - dss: dss@58000000 { - compatible = "ti,omap4-dss"; - reg = <0x58000000 0x80>; - status = "disabled"; - ti,hwmods = "dss_core"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; + /* + * DSS is only using l3 mapping without l4 as noted in the TRM + * "10.1.3 DSS Register Manual" for omap4460. + */ + target-module@58000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58000000 4>, + <0x58000014 4>; + reg-names = "rev", "syss"; + ti,syss-mask = <1>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 0>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>; + clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; #address-cells = <1>; #size-cells = <1>; - ranges; - - dispc@58001000 { - compatible = "ti,omap4-dispc"; - reg = <0x58001000 0x1000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; - }; - - rfbi: encoder@58002000 { - compatible = "ti,omap4-rfbi"; - reg = <0x58002000 0x1000>; - status = "disabled"; - ti,hwmods = "dss_rfbi"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>; - clock-names = "fck", "ick"; - }; + ranges = <0 0x58000000 0x1000000>; - venc: encoder@58003000 { - compatible = "ti,omap4-venc"; - reg = <0x58003000 0x1000>; + dss: dss@0 { + compatible = "ti,omap4-dss"; + reg = <0 0x80>; status = "disabled"; - ti,hwmods = "dss_venc"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; - }; - - dsi1: encoder@58004000 { - compatible = "ti,omap4-dsi"; - reg = <0x58004000 0x200>, - <0x58004200 0x40>, - <0x58004300 0x20>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi1"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, - <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - dsi2: encoder@58005000 { - compatible = "ti,omap4-dsi"; - reg = <0x58005000 0x200>, - <0x58005200 0x40>, - <0x58005300 0x20>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi2"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, - <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - hdmi: encoder@58006000 { - compatible = "ti,omap4-hdmi"; - reg = <0x58006000 0x200>, - <0x58006200 0x100>, - <0x58006300 0x100>, - <0x58006400 0x1000>; - reg-names = "wp", "pll", "phy", "core"; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_hdmi"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, - <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - dmas = <&sdma 76>; - dma-names = "audio_tx"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000000>; + + target-module@1000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x1000 0x4>, + <0x1010 0x4>, + <0x1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x1000>; + + dispc@0 { + compatible = "ti,omap4-dispc"; + reg = <0 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@2000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2000 0x4>, + <0x2010 0x4>, + <0x2014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + rfbi: encoder@0 { + reg = <0 0x1000>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>; + clock-names = "fck", "ick"; + }; + }; + + target-module@3000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x3000 0x4>; + reg-names = "rev"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "sys_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x3000 0x1000>; + + venc: encoder@0 { + compatible = "ti,omap4-venc"; + reg = <0 0x1000>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>; + clock-names = "fck"; + }; + }; + + target-module@4000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4000 0x1000>; + + dsi1: encoder@0 { + compatible = "ti,omap4-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x20>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + }; + }; + + target-module@5000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5000 0x4>, + <0x5010 0x4>, + <0x5014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5000 0x1000>; + + dsi2: encoder@0 { + compatible = "ti,omap4-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x20>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + }; + }; + + target-module@6000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x6000 0x4>, + <0x6010 0x4>; + reg-names = "rev", "sysc"; + /* + * Has SYSC_IDLE_SMART and SYSC_IDLE_SMART_WKUP + * but HDMI audio will fail with them. + */ + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; + clock-names = "fck", "dss_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x6000 0x2000>; + + hdmi: encoder@0 { + compatible = "ti,omap4-hdmi"; + reg = <0 0x200>, + <0x200 0x100>, + <0x300 0x100>, + <0x400 0x1000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; + }; + }; }; }; }; diff --git a/sys/gnu/dts/arm/omap5-l4-abe.dtsi b/sys/gnu/dts/arm/omap5-l4-abe.dtsi index 4ec7909df78b..bafd6adf9f45 100644 --- a/sys/gnu/dts/arm/omap5-l4-abe.dtsi +++ b/sys/gnu/dts/arm/omap5-l4-abe.dtsi @@ -426,8 +426,20 @@ }; target-module@f1000 { /* 0x401f1000, ap 32 20.0 */ - compatible = "ti,sysc"; - status = "disabled"; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xf1000 0x4>, + <0xf1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_AESS_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf1000 0x1000>, diff --git a/sys/gnu/dts/arm/omap5.dtsi b/sys/gnu/dts/arm/omap5.dtsi index a7562d3deb1a..2ac7f021c284 100644 --- a/sys/gnu/dts/arm/omap5.dtsi +++ b/sys/gnu/dts/arm/omap5.dtsi @@ -293,78 +293,185 @@ */ }; - dss: dss@58000000 { - compatible = "ti,omap5-dss"; - reg = <0x58000000 0x80>; - status = "disabled"; - ti,hwmods = "dss_core"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; + target-module@58000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58000000 4>, + <0x58000014 4>; + reg-names = "rev", "syss"; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 0>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>; + clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0 0x58000000 0x1000000>; - dispc@58001000 { - compatible = "ti,omap5-dispc"; - reg = <0x58001000 0x1000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; + dss: dss@0 { + compatible = "ti,omap5-dss"; + reg = <0 0x80>; + status = "disabled"; clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; - }; - - rfbi: encoder@58002000 { - compatible = "ti,omap5-rfbi"; - reg = <0x58002000 0x100>; - status = "disabled"; - ti,hwmods = "dss_rfbi"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>; - clock-names = "fck", "ick"; - }; - - dsi1: encoder@58004000 { - compatible = "ti,omap5-dsi"; - reg = <0x58004000 0x200>, - <0x58004200 0x40>, - <0x58004300 0x40>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi1"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, - <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - dsi2: encoder@58005000 { - compatible = "ti,omap5-dsi"; - reg = <0x58009000 0x200>, - <0x58009200 0x40>, - <0x58009300 0x40>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi2"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, - <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - hdmi: encoder@58060000 { - compatible = "ti,omap5-hdmi"; - reg = <0x58040000 0x200>, - <0x58040200 0x80>, - <0x58040300 0x80>, - <0x58060000 0x19000>; - reg-names = "wp", "pll", "phy", "core"; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_hdmi"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, - <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - dmas = <&sdma 76>; - dma-names = "audio_tx"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000000>; + + target-module@1000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x1000 0x4>, + <0x1010 0x4>, + <0x1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x1000>; + + dispc@0 { + compatible = "ti,omap5-dispc"; + reg = <0 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@2000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2000 0x4>, + <0x2010 0x4>, + <0x2014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + rfbi: encoder@0 { + compatible = "ti,omap5-rfbi"; + reg = <0 0x100>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>; + clock-names = "fck", "ick"; + }; + }; + + target-module@5000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5000 0x4>, + <0x5010 0x4>, + <0x5014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5000 0x1000>; + + dsi1: encoder@0 { + compatible = "ti,omap5-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@9000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x9000 0x4>, + <0x9010 0x4>, + <0x9014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x9000 0x1000>; + + dsi2: encoder@0 { + compatible = "ti,omap5-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@40000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x40000 0x4>, + <0x40010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck", "dss_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000 0x40000>; + + hdmi: encoder@0 { + compatible = "ti,omap5-hdmi"; + reg = <0 0x200>, + <0x200 0x80>, + <0x300 0x80>, + <0x20000 0x19000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; + }; + }; }; }; diff --git a/sys/gnu/dts/arm/pxa168-aspenite.dts b/sys/gnu/dts/arm/pxa168-aspenite.dts index 2ad40e373194..8bade6bf395b 100644 --- a/sys/gnu/dts/arm/pxa168-aspenite.dts +++ b/sys/gnu/dts/arm/pxa168-aspenite.dts @@ -18,18 +18,16 @@ memory { reg = <0x00000000 0x04000000>; }; +}; - soc { - apb@d4000000 { - uart1: uart@d4017000 { - status = "okay"; - }; - twsi1: i2c@d4011000 { - status = "okay"; - }; - rtc: rtc@d4010000 { - status = "okay"; - }; - }; - }; +&uart1 { + status = "okay"; +}; + +&twsi1 { + status = "okay"; +}; + +&rtc { + status = "okay"; }; diff --git a/sys/gnu/dts/arm/pxa168.dtsi b/sys/gnu/dts/arm/pxa168.dtsi index 72f8cb60cb53..9a9e38245e88 100644 --- a/sys/gnu/dts/arm/pxa168.dtsi +++ b/sys/gnu/dts/arm/pxa168.dtsi @@ -55,27 +55,30 @@ interrupts = <13>; }; - uart1: uart@d4017000 { - compatible = "mrvl,mmp-uart"; + uart1: serial@d4017000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4017000 0x1000>; + reg-shift = <2>; interrupts = <27>; clocks = <&soc_clocks PXA168_CLK_UART0>; resets = <&soc_clocks PXA168_CLK_UART0>; status = "disabled"; }; - uart2: uart@d4018000 { - compatible = "mrvl,mmp-uart"; + uart2: serial@d4018000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4018000 0x1000>; + reg-shift = <2>; interrupts = <28>; clocks = <&soc_clocks PXA168_CLK_UART1>; resets = <&soc_clocks PXA168_CLK_UART1>; status = "disabled"; }; - uart3: uart@d4026000 { - compatible = "mrvl,mmp-uart"; + uart3: serial@d4026000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4026000 0x1000>; + reg-shift = <2>; interrupts = <29>; clocks = <&soc_clocks PXA168_CLK_UART2>; resets = <&soc_clocks PXA168_CLK_UART2>; diff --git a/sys/gnu/dts/arm/pxa910-dkb.dts b/sys/gnu/dts/arm/pxa910-dkb.dts index 0f899e672e82..ce76158867c7 100644 --- a/sys/gnu/dts/arm/pxa910-dkb.dts +++ b/sys/gnu/dts/arm/pxa910-dkb.dts @@ -18,155 +18,153 @@ memory { reg = <0x00000000 0x10000000>; }; +}; - soc { - apb@d4000000 { - uart1: uart@d4017000 { - status = "okay"; - }; - twsi1: i2c@d4011000 { - status = "okay"; +&uart1 { + status = "okay"; +}; + +&twsi1 { + status = "okay"; - pmic: 88pm860x@34 { - compatible = "marvell,88pm860x"; - reg = <0x34>; - interrupts = <4>; - interrupt-parent = <&intc>; - interrupt-controller; - #interrupt-cells = <1>; + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + interrupts = <4>; + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <1>; - marvell,88pm860x-irq-read-clr; - marvell,88pm860x-slave-addr = <0x11>; + marvell,88pm860x-irq-read-clr; + marvell,88pm860x-slave-addr = <0x11>; - regulators { - BUCK1 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - BUCK2 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - BUCK3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - LDO1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <2800000>; - regulator-boot-on; - regulator-always-on; - }; - LDO2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - LDO3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - LDO4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - LDO5 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - LDO6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - LDO7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-boot-on; - regulator-always-on; - }; - LDO9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - LDO10 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - LDO12 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - LDO13 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - LDO14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - rtc { - marvell,88pm860x-vrtc = <1>; - }; - touch { - marvell,88pm860x-gpadc-prebias = <1>; - marvell,88pm860x-gpadc-slot-cycle = <1>; - marvell,88pm860x-tsi-prebias = <6>; - marvell,88pm860x-pen-prebias = <16>; - marvell,88pm860x-pen-prechg = <2>; - marvell,88pm860x-resistor-X = <300>; - }; - backlights { - backlight-0 { - marvell,88pm860x-iset = <4>; - marvell,88pm860x-pwm = <3>; - }; - backlight-2 { - }; - }; - leds { - led0-red { - marvell,88pm860x-iset = <12>; - }; - led0-green { - marvell,88pm860x-iset = <12>; - }; - led0-blue { - marvell,88pm860x-iset = <12>; - }; - }; - }; - }; - rtc: rtc@d4010000 { - status = "okay"; + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + regulator-always-on; + }; + LDO2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO5 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO13 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + rtc { + marvell,88pm860x-vrtc = <1>; + }; + touch { + marvell,88pm860x-gpadc-prebias = <1>; + marvell,88pm860x-gpadc-slot-cycle = <1>; + marvell,88pm860x-tsi-prebias = <6>; + marvell,88pm860x-pen-prebias = <16>; + marvell,88pm860x-pen-prechg = <2>; + marvell,88pm860x-resistor-X = <300>; + }; + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; + }; + leds { + led0-red { + marvell,88pm860x-iset = <12>; + }; + led0-green { + marvell,88pm860x-iset = <12>; + }; + led0-blue { + marvell,88pm860x-iset = <12>; }; }; }; }; + +&rtc { + status = "okay"; +}; diff --git a/sys/gnu/dts/arm/pxa910.dtsi b/sys/gnu/dts/arm/pxa910.dtsi index b3d6182d4de4..587a5e7f0702 100644 --- a/sys/gnu/dts/arm/pxa910.dtsi +++ b/sys/gnu/dts/arm/pxa910.dtsi @@ -67,27 +67,30 @@ status = "disabled"; }; - uart1: uart@d4017000 { - compatible = "mrvl,mmp-uart"; + uart1: serial@d4017000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4017000 0x1000>; + reg-shift = <2>; interrupts = <27>; clocks = <&soc_clocks PXA910_CLK_UART0>; resets = <&soc_clocks PXA910_CLK_UART0>; status = "disabled"; }; - uart2: uart@d4018000 { - compatible = "mrvl,mmp-uart"; + uart2: serial@d4018000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4018000 0x1000>; + reg-shift = <2>; interrupts = <28>; clocks = <&soc_clocks PXA910_CLK_UART1>; resets = <&soc_clocks PXA910_CLK_UART1>; status = "disabled"; }; - uart3: uart@d4036000 { - compatible = "mrvl,mmp-uart"; + uart3: serial@d4036000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; reg = <0xd4036000 0x1000>; + reg-shift = <2>; interrupts = <59>; clocks = <&soc_clocks PXA910_CLK_UART2>; resets = <&soc_clocks PXA910_CLK_UART2>; diff --git a/sys/gnu/dts/arm/qcom-apq8064.dtsi b/sys/gnu/dts/arm/qcom-apq8064.dtsi index 8b79b4112ee1..2687c4e890ba 100644 --- a/sys/gnu/dts/arm/qcom-apq8064.dtsi +++ b/sys/gnu/dts/arm/qcom-apq8064.dtsi @@ -350,6 +350,7 @@ reg = <0x800000 0x4000>; gpio-controller; + gpio-ranges = <&tlmm_pinmux 0 0 90>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/sys/gnu/dts/arm/qcom-apq8084.dtsi b/sys/gnu/dts/arm/qcom-apq8084.dtsi index fa1852eed37b..bf6a03506b45 100644 --- a/sys/gnu/dts/arm/qcom-apq8084.dtsi +++ b/sys/gnu/dts/arm/qcom-apq8084.dtsi @@ -403,6 +403,7 @@ compatible = "qcom,apq8084-pinctrl"; reg = <0xfd510000 0x4000>; gpio-controller; + gpio-ranges = <&tlmm 0 0 147>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/sys/gnu/dts/arm/qcom-ipq4019.dtsi b/sys/gnu/dts/arm/qcom-ipq4019.dtsi index 71bb25a8afc0..bfa9ce4c6e69 100644 --- a/sys/gnu/dts/arm/qcom-ipq4019.dtsi +++ b/sys/gnu/dts/arm/qcom-ipq4019.dtsi @@ -201,6 +201,7 @@ compatible = "qcom,ipq4019-pinctrl"; reg = <0x01000000 0x300000>; gpio-controller; + gpio-ranges = <&tlmm 0 0 100>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/sys/gnu/dts/arm/qcom-ipq8064.dtsi b/sys/gnu/dts/arm/qcom-ipq8064.dtsi index 16c0da97932c..4021f661cd11 100644 --- a/sys/gnu/dts/arm/qcom-ipq8064.dtsi +++ b/sys/gnu/dts/arm/qcom-ipq8064.dtsi @@ -119,6 +119,7 @@ reg = <0x800000 0x4000>; gpio-controller; + gpio-ranges = <&qcom_pinmux 0 0 69>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/sys/gnu/dts/arm/qcom-mdm9615.dtsi b/sys/gnu/dts/arm/qcom-mdm9615.dtsi index 356e9535f7a6..347b4f7d7889 100644 --- a/sys/gnu/dts/arm/qcom-mdm9615.dtsi +++ b/sys/gnu/dts/arm/qcom-mdm9615.dtsi @@ -128,6 +128,7 @@ msmgpio: pinctrl@800000 { compatible = "qcom,mdm9615-pinctrl"; gpio-controller; + gpio-ranges = <&msmgpio 0 0 88>; #gpio-cells = <2>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; diff --git a/sys/gnu/dts/arm/qcom-msm8660.dtsi b/sys/gnu/dts/arm/qcom-msm8660.dtsi index ec5cbc468bd3..480fc08cbe8e 100644 --- a/sys/gnu/dts/arm/qcom-msm8660.dtsi +++ b/sys/gnu/dts/arm/qcom-msm8660.dtsi @@ -115,6 +115,7 @@ reg = <0x800000 0x4000>; gpio-controller; + gpio-ranges = <&tlmm 0 0 173>; #gpio-cells = <2>; interrupts = <0 16 0x4>; interrupt-controller; diff --git a/sys/gnu/dts/arm/qcom-msm8960.dtsi b/sys/gnu/dts/arm/qcom-msm8960.dtsi index f2aeaccdc1ad..172ea3c70eac 100644 --- a/sys/gnu/dts/arm/qcom-msm8960.dtsi +++ b/sys/gnu/dts/arm/qcom-msm8960.dtsi @@ -107,6 +107,7 @@ msmgpio: pinctrl@800000 { compatible = "qcom,msm8960-pinctrl"; gpio-controller; + gpio-ranges = <&msmgpio 0 0 152>; #gpio-cells = <2>; interrupts = <0 16 0x4>; interrupt-controller; diff --git a/sys/gnu/dts/arm/qcom-msm8974-lge-nexus5-hammerhead.dts b/sys/gnu/dts/arm/qcom-msm8974-lge-nexus5-hammerhead.dts index 3487daf98e81..32b474bfeec3 100644 --- a/sys/gnu/dts/arm/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/sys/gnu/dts/arm/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -12,6 +12,7 @@ aliases { serial0 = &blsp1_uart1; + serial1 = &blsp2_uart10; }; chosen { @@ -355,6 +356,57 @@ bias-disable; }; }; + + bt_pin: bt { + hostwake { + pins = "gpio42"; + function = "gpio"; + }; + + devwake { + pins = "gpio62"; + function = "gpio"; + }; + + shutdown { + pins = "gpio41"; + function = "gpio"; + }; + }; + + blsp2_uart10_pin_a: blsp2-uart10-pin-active { + tx { + pins = "gpio53"; + function = "blsp_uart10"; + + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio54"; + function = "blsp_uart10"; + + drive-strength = <2>; + bias-pull-up; + }; + + cts { + pins = "gpio55"; + function = "blsp_uart10"; + + drive-strength = <2>; + bias-pull-up; + }; + + rts { + pins = "gpio56"; + function = "blsp_uart10"; + + drive-strength = <2>; + bias-disable; + }; + }; }; sdhci@f9824900 { @@ -418,6 +470,25 @@ }; }; + serial@f9960000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_uart10_pin_a>; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_pin>; + + host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>; + }; + }; + i2c@f9967000 { status = "ok"; pinctrl-names = "default"; diff --git a/sys/gnu/dts/arm/qcom-msm8974-sony-xperia-honami.dts b/sys/gnu/dts/arm/qcom-msm8974-sony-xperia-honami.dts index 450b8321e0a6..611bae9fe66b 100644 --- a/sys/gnu/dts/arm/qcom-msm8974-sony-xperia-honami.dts +++ b/sys/gnu/dts/arm/qcom-msm8974-sony-xperia-honami.dts @@ -260,6 +260,31 @@ }; &soc { + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; + sdhci@f9824900 { status = "ok"; diff --git a/sys/gnu/dts/arm/qcom-msm8974.dtsi b/sys/gnu/dts/arm/qcom-msm8974.dtsi index 4b161b809dd5..2ea2308d91b3 100644 --- a/sys/gnu/dts/arm/qcom-msm8974.dtsi +++ b/sys/gnu/dts/arm/qcom-msm8974.dtsi @@ -715,6 +715,15 @@ status = "disabled"; }; + blsp2_uart10: serial@f9960000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf9960000 0x1000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + sdhci@f9824900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; @@ -925,6 +934,7 @@ compatible = "qcom,msm8974-pinctrl"; reg = <0xfd510000 0x4000>; gpio-controller; + gpio-ranges = <&msmgpio 0 0 146>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/sys/gnu/dts/arm/r7s72100-gr-peach.dts b/sys/gnu/dts/arm/r7s72100-gr-peach.dts index fe1a4aa4d7cb..2562cc9b5356 100644 --- a/sys/gnu/dts/arm/r7s72100-gr-peach.dts +++ b/sys/gnu/dts/arm/r7s72100-gr-peach.dts @@ -41,6 +41,9 @@ bank-width = <4>; device-width = <1>; + clocks = <&mstp9_clks R7S72100_CLK_SPIBSC0>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; #size-cells = <1>; diff --git a/sys/gnu/dts/arm/r7s72100.dtsi b/sys/gnu/dts/arm/r7s72100.dtsi index 75b2796ebfca..0a567d8ebc66 100644 --- a/sys/gnu/dts/arm/r7s72100.dtsi +++ b/sys/gnu/dts/arm/r7s72100.dtsi @@ -467,11 +467,12 @@ #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xfcfe0438 4>; - clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>; + clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>, <&b_clk>, <&b_clk>; clock-indices = < R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3 + R7S72100_CLK_SPIBSC0 R7S72100_CLK_SPIBSC1 >; - clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3"; + clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3", "spibsc0", "spibsc1"; }; mstp10_clks: mstp10_clks@fcfe043c { diff --git a/sys/gnu/dts/arm/r7s9210.dtsi b/sys/gnu/dts/arm/r7s9210.dtsi index 72b79770e336..cace43807497 100644 --- a/sys/gnu/dts/arm/r7s9210.dtsi +++ b/sys/gnu/dts/arm/r7s9210.dtsi @@ -304,7 +304,6 @@ reg = <0xe803b000 0x30>; interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>; clocks = <&cpg CPG_MOD 36>; - clock-names = "ostm0"; power-domains = <&cpg>; status = "disabled"; }; @@ -314,7 +313,6 @@ reg = <0xe803c000 0x30>; interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; clocks = <&cpg CPG_MOD 35>; - clock-names = "ostm1"; power-domains = <&cpg>; status = "disabled"; }; @@ -324,7 +322,6 @@ reg = <0xe803d000 0x30>; interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>; clocks = <&cpg CPG_MOD 34>; - clock-names = "ostm2"; power-domains = <&cpg>; status = "disabled"; }; diff --git a/sys/gnu/dts/arm/r8a73a4-ape6evm.dts b/sys/gnu/dts/arm/r8a73a4-ape6evm.dts index a5351ddbf506..b088e8e351d5 100644 --- a/sys/gnu/dts/arm/r8a73a4-ape6evm.dts +++ b/sys/gnu/dts/arm/r8a73a4-ape6evm.dts @@ -157,11 +157,8 @@ &cpu0 { cpu0-supply = <&vdd_dvfs>; - operating-points = < - /* kHz uV */ - 1950000 1115000 - 1462500 995000 - >; + operating-points = <1950000 1115000>, /* kHz uV */ + <1462500 995000>; voltage-tolerance = <1>; /* 1% */ }; diff --git a/sys/gnu/dts/arm/r8a73a4.dtsi b/sys/gnu/dts/arm/r8a73a4.dtsi index a5cd31229fbd..a3ba722a9d7f 100644 --- a/sys/gnu/dts/arm/r8a73a4.dtsi +++ b/sys/gnu/dts/arm/r8a73a4.dtsi @@ -131,7 +131,14 @@ cmt1: timer@e6130000 { compatible = "renesas,r8a73a4-cmt1", "renesas,rcar-gen2-cmt1"; reg = <0 0xe6130000 0 0x1004>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A73A4_CLK_CMT1>; clock-names = "fck"; power-domains = <&pd_c5>; diff --git a/sys/gnu/dts/arm/r8a7740.dtsi b/sys/gnu/dts/arm/r8a7740.dtsi index ebc1ff64f530..90feb2cf9960 100644 --- a/sys/gnu/dts/arm/r8a7740.dtsi +++ b/sys/gnu/dts/arm/r8a7740.dtsi @@ -479,7 +479,7 @@ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7740-cpg-clocks"; reg = <0xe6150000 0x10000>; - clocks = <&extal1_clk>, <&extalr_clk>; + clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>; #clock-cells = <1>; clock-output-names = "system", "pllc0", "pllc1", "pllc2", "r", diff --git a/sys/gnu/dts/arm/r8a7743.dtsi b/sys/gnu/dts/arm/r8a7743.dtsi index 1cd19a569bd0..e8b340bb99bc 100644 --- a/sys/gnu/dts/arm/r8a7743.dtsi +++ b/sys/gnu/dts/arm/r8a7743.dtsi @@ -1669,9 +1669,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/sys/gnu/dts/arm/r8a7744.dtsi b/sys/gnu/dts/arm/r8a7744.dtsi index 1c82dd0abd76..def840b8b2d3 100644 --- a/sys/gnu/dts/arm/r8a7744.dtsi +++ b/sys/gnu/dts/arm/r8a7744.dtsi @@ -1655,9 +1655,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/sys/gnu/dts/arm/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/sys/gnu/dts/arm/r8a7745-iwg22d-sodimm-dbhd-ca.dts index 2aeebfc9e4f1..b1f679da36b2 100644 --- a/sys/gnu/dts/arm/r8a7745-iwg22d-sodimm-dbhd-ca.dts +++ b/sys/gnu/dts/arm/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -84,8 +84,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; @@ -108,6 +106,12 @@ }; }; +&lcd_panel { + status = "disabled"; + + /delete-node/ port; +}; + &pfc { can1_pins: can1 { groups = "can1_data_b"; diff --git a/sys/gnu/dts/arm/r8a7745-iwg22d-sodimm.dts b/sys/gnu/dts/arm/r8a7745-iwg22d-sodimm.dts index 58d369ad8279..b15b1b088a32 100644 --- a/sys/gnu/dts/arm/r8a7745-iwg22d-sodimm.dts +++ b/sys/gnu/dts/arm/r8a7745-iwg22d-sodimm.dts @@ -30,6 +30,7 @@ /dts-v1/; #include "r8a7745-iwg22m.dtsi" +#include <dt-bindings/pwm/pwm.h> / { model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E"; @@ -78,6 +79,49 @@ gpios-states = <1>; states = <3300000 1>, <1800000 0>; }; + + vccq_panel: regulator-vccq-panel { + compatible = "regulator-fixed"; + regulator-name = "Panel VccQ"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + enable-active-high; + }; + + backlight_lcd: backlight { + compatible = "pwm-backlight"; + pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + + lcd_panel: lcd { + compatible = "edt,etm043080dh6gp"; + power-supply = <&vccq_panel>; + backlight = <&backlight_lcd>; + + port { + lcd_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&lcd_in>; + }; + }; + }; }; &avb { @@ -127,6 +171,39 @@ status = "okay"; clock-frequency = <400000>; + stmpe811@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + interrupt-parent = <&gpio4>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; #sound-dai-cells = <0>; @@ -149,11 +226,21 @@ function = "avb"; }; + backlight_pins: backlight { + groups = "tpu_to3_c"; + function = "tpu"; + }; + can0_pins: can0 { groups = "can0_data"; function = "can0"; }; + du0_pins: du0 { + groups = "du0_rgb666", "du0_sync", "du0_disp", "du0_clk0_out"; + function = "du0"; + }; + hscif1_pins: hscif1 { groups = "hscif1_data", "hscif1_ctrl"; function = "hscif1"; @@ -229,6 +316,12 @@ shared-pin; }; +&tpu { + pinctrl-0 = <&backlight_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &usbphy { status = "okay"; }; diff --git a/sys/gnu/dts/arm/r8a7745.dtsi b/sys/gnu/dts/arm/r8a7745.dtsi index 3f88a7e34af2..7ab58d8bb740 100644 --- a/sys/gnu/dts/arm/r8a7745.dtsi +++ b/sys/gnu/dts/arm/r8a7745.dtsi @@ -1506,11 +1506,12 @@ du: display@feb00000 { compatible = "renesas,du-r8a7745"; reg = <0 0xfeb00000 0 0x40000>; - reg-names = "du"; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/sys/gnu/dts/arm/r8a77470.dtsi b/sys/gnu/dts/arm/r8a77470.dtsi index 6efcef1670e1..f55153192276 100644 --- a/sys/gnu/dts/arm/r8a77470.dtsi +++ b/sys/gnu/dts/arm/r8a77470.dtsi @@ -942,9 +942,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/sys/gnu/dts/arm/r8a7790-lager.dts b/sys/gnu/dts/arm/r8a7790-lager.dts index 097fd9317c6e..bfe778c4c47b 100644 --- a/sys/gnu/dts/arm/r8a7790-lager.dts +++ b/sys/gnu/dts/arm/r8a7790-lager.dts @@ -364,8 +364,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; @@ -674,6 +672,7 @@ interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; }; }; diff --git a/sys/gnu/dts/arm/r8a7790-stout.dts b/sys/gnu/dts/arm/r8a7790-stout.dts index a315ba749aa4..6a457bc9280a 100644 --- a/sys/gnu/dts/arm/r8a7790-stout.dts +++ b/sys/gnu/dts/arm/r8a7790-stout.dts @@ -203,6 +203,7 @@ interrupt-parent = <&irqc0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; }; }; @@ -296,8 +297,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/sys/gnu/dts/arm/r8a7790.dtsi b/sys/gnu/dts/arm/r8a7790.dtsi index 334ba19769b9..e5ef9fd4284a 100644 --- a/sys/gnu/dts/arm/r8a7790.dtsi +++ b/sys/gnu/dts/arm/r8a7790.dtsi @@ -1719,6 +1719,8 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>; clock-names = "du.0", "du.1", "du.2"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/sys/gnu/dts/arm/r8a7791-koelsch.dts b/sys/gnu/dts/arm/r8a7791-koelsch.dts index 2b096d5e06fb..fc74c6cd6def 100644 --- a/sys/gnu/dts/arm/r8a7791-koelsch.dts +++ b/sys/gnu/dts/arm/r8a7791-koelsch.dts @@ -387,8 +387,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; @@ -633,6 +631,7 @@ interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/sys/gnu/dts/arm/r8a7791-porter.dts b/sys/gnu/dts/arm/r8a7791-porter.dts index f9ece7ab2010..114bf1c4199b 100644 --- a/sys/gnu/dts/arm/r8a7791-porter.dts +++ b/sys/gnu/dts/arm/r8a7791-porter.dts @@ -181,8 +181,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; @@ -307,6 +305,7 @@ interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/sys/gnu/dts/arm/r8a7791.dtsi b/sys/gnu/dts/arm/r8a7791.dtsi index 59a55e87fcc6..6e5bd86731cd 100644 --- a/sys/gnu/dts/arm/r8a7791.dtsi +++ b/sys/gnu/dts/arm/r8a7791.dtsi @@ -1681,9 +1681,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/sys/gnu/dts/arm/r8a7792-blanche.dts b/sys/gnu/dts/arm/r8a7792-blanche.dts index 248eb717eb35..9368ac2cf508 100644 --- a/sys/gnu/dts/arm/r8a7792-blanche.dts +++ b/sys/gnu/dts/arm/r8a7792-blanche.dts @@ -289,8 +289,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/sys/gnu/dts/arm/r8a7792-wheat.dts b/sys/gnu/dts/arm/r8a7792-wheat.dts index bd2a63bdab3d..ba2d2a589012 100644 --- a/sys/gnu/dts/arm/r8a7792-wheat.dts +++ b/sys/gnu/dts/arm/r8a7792-wheat.dts @@ -249,14 +249,12 @@ */ hdmi@3d { compatible = "adi,adv7513"; - reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>; + reg-names = "main", "edid", "cec", "packet"; adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; @@ -280,14 +278,12 @@ hdmi@39 { compatible = "adi,adv7513"; - reg = <0x39>, <0x29>, <0x49>, <0x59>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x39>, <0x49>, <0x29>, <0x59>; + reg-names = "main", "edid", "cec", "packet"; adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/sys/gnu/dts/arm/r8a7792.dtsi b/sys/gnu/dts/arm/r8a7792.dtsi index 39af16caa2ae..4627eefa502b 100644 --- a/sys/gnu/dts/arm/r8a7792.dtsi +++ b/sys/gnu/dts/arm/r8a7792.dtsi @@ -852,9 +852,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/sys/gnu/dts/arm/r8a7793-gose.dts b/sys/gnu/dts/arm/r8a7793-gose.dts index 22ca7cd1e7d2..79baf06019f5 100644 --- a/sys/gnu/dts/arm/r8a7793-gose.dts +++ b/sys/gnu/dts/arm/r8a7793-gose.dts @@ -366,8 +366,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; @@ -591,6 +589,7 @@ interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/sys/gnu/dts/arm/r8a7793.dtsi b/sys/gnu/dts/arm/r8a7793.dtsi index eef035c4d983..dadbda16161b 100644 --- a/sys/gnu/dts/arm/r8a7793.dtsi +++ b/sys/gnu/dts/arm/r8a7793.dtsi @@ -1341,9 +1341,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/sys/gnu/dts/arm/r8a7794-alt.dts b/sys/gnu/dts/arm/r8a7794-alt.dts index f79fce74cd9c..935935c1dbac 100644 --- a/sys/gnu/dts/arm/r8a7794-alt.dts +++ b/sys/gnu/dts/arm/r8a7794-alt.dts @@ -343,6 +343,7 @@ interrupt-parent = <&irqc0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; }; diff --git a/sys/gnu/dts/arm/r8a7794-silk.dts b/sys/gnu/dts/arm/r8a7794-silk.dts index 2c16ad854300..b8b0941f677c 100644 --- a/sys/gnu/dts/arm/r8a7794-silk.dts +++ b/sys/gnu/dts/arm/r8a7794-silk.dts @@ -255,8 +255,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; @@ -394,6 +392,7 @@ interrupt-parent = <&irqc0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; }; diff --git a/sys/gnu/dts/arm/r8a7794.dtsi b/sys/gnu/dts/arm/r8a7794.dtsi index 05ef79c6ed7f..2c9e7a1ebfec 100644 --- a/sys/gnu/dts/arm/r8a7794.dtsi +++ b/sys/gnu/dts/arm/r8a7794.dtsi @@ -1356,6 +1356,8 @@ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/sys/gnu/dts/arm/rk3036-kylin.dts b/sys/gnu/dts/arm/rk3036-kylin.dts index fb3cf005cc90..2ff9f152d29b 100644 --- a/sys/gnu/dts/arm/rk3036-kylin.dts +++ b/sys/gnu/dts/arm/rk3036-kylin.dts @@ -319,7 +319,7 @@ bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; - default-sample-phase = <90>; + rockchip,default-sample-phase = <90>; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; diff --git a/sys/gnu/dts/arm/rk3036.dtsi b/sys/gnu/dts/arm/rk3036.dtsi index cf36e25195b4..d9a0c9a29b68 100644 --- a/sys/gnu/dts/arm/rk3036.dtsi +++ b/sys/gnu/dts/arm/rk3036.dtsi @@ -54,7 +54,7 @@ }; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -101,7 +101,7 @@ #clock-cells = <0>; }; - bus_intmem@10080000 { + bus_intmem: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x2000>; #address-cells = <1>; @@ -128,7 +128,7 @@ assigned-clocks = <&cru SCLK_GPU>; assigned-clock-rates = <100000000>; clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>; - clock-names = "core", "bus"; + clock-names = "bus", "core"; resets = <&cru SRST_GPU>; status = "disabled"; }; @@ -263,7 +263,7 @@ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - default-sample-phase = <158>; + rockchip,default-sample-phase = <158>; disable-wp; dmas = <&pdma 12>; dma-names = "rx-tx"; @@ -281,8 +281,6 @@ compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s"; reg = <0x10220000 0x4000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>; dmas = <&pdma 0>, <&pdma 1>; diff --git a/sys/gnu/dts/arm/rk3066a.dtsi b/sys/gnu/dts/arm/rk3066a.dtsi index 3d1b02f45ffd..b599394d149d 100644 --- a/sys/gnu/dts/arm/rk3066a.dtsi +++ b/sys/gnu/dts/arm/rk3066a.dtsi @@ -156,14 +156,12 @@ compatible = "rockchip,rk3066-i2s"; reg = <0x10118000 0x2000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac1_s 4>, <&dmac1_s 5>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; rockchip,playback-channels = <8>; rockchip,capture-channels = <2>; #sound-dai-cells = <0>; @@ -174,14 +172,12 @@ compatible = "rockchip,rk3066-i2s"; reg = <0x1011a000 0x2000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2s1_bus>; + clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac1_s 6>, <&dmac1_s 7>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; #sound-dai-cells = <0>; @@ -192,14 +188,12 @@ compatible = "rockchip,rk3066-i2s"; reg = <0x1011c000 0x2000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2s2_bus>; + clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac1_s 9>, <&dmac1_s 10>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; #sound-dai-cells = <0>; diff --git a/sys/gnu/dts/arm/rk3188-bqedison2qc.dts b/sys/gnu/dts/arm/rk3188-bqedison2qc.dts index ad1afd403052..66a0ff196eb1 100644 --- a/sys/gnu/dts/arm/rk3188-bqedison2qc.dts +++ b/sys/gnu/dts/arm/rk3188-bqedison2qc.dts @@ -58,20 +58,25 @@ lvds-encoder { compatible = "ti,sn75lvds83", "lvds-encoder"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - lvds_in_vop0: endpoint { - remote-endpoint = <&vop0_out_lvds>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_in_vop0: endpoint { + remote-endpoint = <&vop0_out_lvds>; + }; }; - }; - port@1 { - reg = <1>; - lvds_out_panel: endpoint { - remote-endpoint = <&panel_in_lvds>; + port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; }; }; }; @@ -465,7 +470,7 @@ non-removable; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; - vmmcq-supply = <&vccio_wl>; + vqmmc-supply = <&vccio_wl>; #address-cells = <1>; #size-cells = <0>; status = "okay"; diff --git a/sys/gnu/dts/arm/rk3188.dtsi b/sys/gnu/dts/arm/rk3188.dtsi index 10ede65d90f3..2298a8d840ba 100644 --- a/sys/gnu/dts/arm/rk3188.dtsi +++ b/sys/gnu/dts/arm/rk3188.dtsi @@ -166,14 +166,12 @@ compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s"; reg = <0x1011a000 0x2000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac1_s 6>, <&dmac1_s 7>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; #sound-dai-cells = <0>; @@ -184,8 +182,8 @@ compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; reg = <0x1011e000 0x2000>; #sound-dai-cells = <0>; - clock-names = "hclk", "mclk"; - clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; + clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>; + clock-names = "mclk", "hclk"; dmas = <&dmac1_s 8>; dma-names = "tx"; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; diff --git a/sys/gnu/dts/arm/rk3228-evb.dts b/sys/gnu/dts/arm/rk3228-evb.dts index 5670b33fd1bd..aed879db6c15 100644 --- a/sys/gnu/dts/arm/rk3228-evb.dts +++ b/sys/gnu/dts/arm/rk3228-evb.dts @@ -46,7 +46,7 @@ #address-cells = <1>; #size-cells = <0>; - phy: phy@0 { + phy: ethernet-phy@0 { compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"; reg = <0>; clocks = <&cru SCLK_MAC_PHY>; diff --git a/sys/gnu/dts/arm/rk3229-xms6.dts b/sys/gnu/dts/arm/rk3229-xms6.dts index 679fc2b00e5a..933ef69da32a 100644 --- a/sys/gnu/dts/arm/rk3229-xms6.dts +++ b/sys/gnu/dts/arm/rk3229-xms6.dts @@ -150,7 +150,7 @@ #address-cells = <1>; #size-cells = <0>; - phy: phy@0 { + phy: ethernet-phy@0 { compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/sys/gnu/dts/arm/rk322x.dtsi b/sys/gnu/dts/arm/rk322x.dtsi index 4e90efdc9630..5485a9918da6 100644 --- a/sys/gnu/dts/arm/rk322x.dtsi +++ b/sys/gnu/dts/arm/rk322x.dtsi @@ -95,7 +95,7 @@ }; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -152,8 +152,6 @@ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; reg = <0x100b0000 0x4000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>; dmas = <&pdma 14>, <&pdma 15>; @@ -167,8 +165,6 @@ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; reg = <0x100c0000 0x4000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>; dmas = <&pdma 11>, <&pdma 12>; @@ -193,8 +189,6 @@ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; reg = <0x100e0000 0x4000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>; dmas = <&pdma 0>, <&pdma 1>; @@ -561,7 +555,7 @@ "pp1", "ppmmu1"; clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; - clock-names = "core", "bus"; + clock-names = "bus", "core"; resets = <&cru SRST_GPU_A>; status = "disabled"; }; @@ -698,7 +692,7 @@ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; bus-width = <8>; - default-sample-phase = <158>; + rockchip,default-sample-phase = <158>; fifo-depth = <0x100>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; @@ -718,7 +712,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy0_otg>; phy-names = "usb2-phy"; status = "disabled"; @@ -729,7 +722,6 @@ reg = <0x30080000 0x20000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy0>; - clock-names = "usbhost", "utmi"; phys = <&u2phy0_host>; phy-names = "usb"; status = "disabled"; @@ -740,7 +732,6 @@ reg = <0x300a0000 0x20000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy0>; - clock-names = "usbhost", "utmi"; phys = <&u2phy0_host>; phy-names = "usb"; status = "disabled"; @@ -751,7 +742,6 @@ reg = <0x300c0000 0x20000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST1>, <&u2phy1>; - clock-names = "usbhost", "utmi"; phys = <&u2phy1_otg>; phy-names = "usb"; status = "disabled"; @@ -762,7 +752,6 @@ reg = <0x300e0000 0x20000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST1>, <&u2phy1>; - clock-names = "usbhost", "utmi"; phys = <&u2phy1_otg>; phy-names = "usb"; status = "disabled"; @@ -775,7 +764,6 @@ clocks = <&cru HCLK_HOST2>, <&u2phy1>; phys = <&u2phy1_host>; phy-names = "usb"; - clock-names = "usbhost", "utmi"; status = "disabled"; }; @@ -784,7 +772,6 @@ reg = <0x30120000 0x20000>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST2>, <&u2phy1>; - clock-names = "usbhost", "utmi"; phys = <&u2phy1_host>; phy-names = "usb"; status = "disabled"; @@ -1033,7 +1020,7 @@ }; }; - spi-0 { + spi0 { spi0_clk: spi0-clk { rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>; }; @@ -1051,7 +1038,7 @@ }; }; - spi-1 { + spi1 { spi1_clk: spi1-clk { rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>; }; diff --git a/sys/gnu/dts/arm/rk3288-evb-act8846.dts b/sys/gnu/dts/arm/rk3288-evb-act8846.dts index 80080767c365..be695b8c1f67 100644 --- a/sys/gnu/dts/arm/rk3288-evb-act8846.dts +++ b/sys/gnu/dts/arm/rk3288-evb-act8846.dts @@ -4,6 +4,7 @@ #include "rk3288-evb.dtsi" / { + model = "Rockchip RK3288 EVB ACT8846"; compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288"; vcc_lcd: vcc-lcd { diff --git a/sys/gnu/dts/arm/rk3288-evb-rk808.dts b/sys/gnu/dts/arm/rk3288-evb-rk808.dts index 16788209625b..42384ea4ca21 100644 --- a/sys/gnu/dts/arm/rk3288-evb-rk808.dts +++ b/sys/gnu/dts/arm/rk3288-evb-rk808.dts @@ -4,6 +4,7 @@ #include "rk3288-evb.dtsi" / { + model = "Rockchip RK3288 EVB RK808"; compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; }; diff --git a/sys/gnu/dts/arm/rk3288-firefly-reload.dts b/sys/gnu/dts/arm/rk3288-firefly-reload.dts index 1574383fd2dc..8c38bda21a7c 100644 --- a/sys/gnu/dts/arm/rk3288-firefly-reload.dts +++ b/sys/gnu/dts/arm/rk3288-firefly-reload.dts @@ -234,6 +234,7 @@ }; &saradc { + vref-supply = <&vcc_18>; status = "okay"; }; diff --git a/sys/gnu/dts/arm/rk3288-r89.dts b/sys/gnu/dts/arm/rk3288-r89.dts index a6ffc381abaa..a258c7ae5329 100644 --- a/sys/gnu/dts/arm/rk3288-r89.dts +++ b/sys/gnu/dts/arm/rk3288-r89.dts @@ -9,6 +9,7 @@ #include "rk3288.dtsi" / { + model = "Netxeon R89"; compatible = "netxeon,r89", "rockchip,rk3288"; memory@0 { diff --git a/sys/gnu/dts/arm/rk3288-tinker.dtsi b/sys/gnu/dts/arm/rk3288-tinker.dtsi index 312582c1bd37..acfaa12ec239 100644 --- a/sys/gnu/dts/arm/rk3288-tinker.dtsi +++ b/sys/gnu/dts/arm/rk3288-tinker.dtsi @@ -276,6 +276,7 @@ }; vccio_sd: LDO_REG5 { + regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; diff --git a/sys/gnu/dts/arm/rk3288-vyasa.dts b/sys/gnu/dts/arm/rk3288-vyasa.dts index ba06e9f97ddc..385dd59393e1 100644 --- a/sys/gnu/dts/arm/rk3288-vyasa.dts +++ b/sys/gnu/dts/arm/rk3288-vyasa.dts @@ -78,6 +78,18 @@ vin-supply = <&vcc_io>; }; + vcc50_hdmi: vcc50-hdmi { + compatible = "regulator-fixed"; + regulator-name = "vcc50_hdmi"; + enable-active-high; + gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */ + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsus_5v>; + }; + vusb1_5v: vusb1-5v { compatible = "regulator-fixed"; regulator-name = "vusb1_5v"; @@ -150,7 +162,7 @@ }; &hdmi { - ddc-i2c-bus = <&i2c2>; + ddc-i2c-bus = <&i2c5>; status = "okay"; }; @@ -286,15 +298,15 @@ }; }; - vcc10_lcd: LDO_REG6 { - regulator-name = "vcc10_lcd"; + vdd10_lcd: LDO_REG6 { + regulator-name = "vdd10_lcd"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; + regulator-suspend-microvolt = <1000000>; }; }; @@ -347,7 +359,7 @@ }; }; -&i2c2 { +&i2c5 { status = "okay"; }; @@ -446,6 +458,12 @@ }; }; + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/sys/gnu/dts/arm/rk3288.dtsi b/sys/gnu/dts/arm/rk3288.dtsi index 9beb662166aa..0cd88774db95 100644 --- a/sys/gnu/dts/arm/rk3288.dtsi +++ b/sys/gnu/dts/arm/rk3288.dtsi @@ -155,7 +155,7 @@ }; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -420,6 +420,8 @@ reg-io-width = <4>; clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac_peri 1>, <&dmac_peri 2>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; status = "disabled"; @@ -433,6 +435,8 @@ reg-io-width = <4>; clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac_peri 3>, <&dmac_peri 4>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; status = "disabled"; @@ -459,6 +463,8 @@ reg-io-width = <4>; clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac_peri 7>, <&dmac_peri 8>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart3_xfer>; status = "disabled"; @@ -472,6 +478,8 @@ reg-io-width = <4>; clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac_peri 9>, <&dmac_peri 10>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart4_xfer>; status = "disabled"; @@ -601,7 +609,6 @@ reg = <0x0 0xff500000 0x0 0x100>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_USBHOST0>; - clock-names = "usbhost"; phys = <&usbphy1>; phy-names = "usb"; status = "disabled"; @@ -644,7 +651,6 @@ reg = <0x0 0xff5c0000 0x0 0x100>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HSIC>; - clock-names = "usbhost"; status = "disabled"; }; @@ -718,7 +724,7 @@ status = "disabled"; }; - bus_intmem@ff700000 { + bus_intmem: sram@ff700000 { compatible = "mmio-sram"; reg = <0x0 0xff700000 0x0 0x18000>; #address-cells = <1>; @@ -730,7 +736,7 @@ }; }; - sram@ff720000 { + pmu_sram: sram@ff720000 { compatible = "rockchip,rk3288-pmu-sram", "mmio-sram"; reg = <0x0 0xff720000 0x0 0x1000>; }; @@ -946,8 +952,8 @@ compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif"; reg = <0x0 0xff8b0000 0x0 0x10000>; #sound-dai-cells = <0>; - clock-names = "hclk", "mclk"; - clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>; + clocks = <&cru SCLK_SPDIF8CH>, <&cru HCLK_SPDIF8CH>; + clock-names = "mclk", "hclk"; dmas = <&dmac_bus_s 3>; dma-names = "tx"; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; @@ -962,12 +968,10 @@ reg = <0x0 0xff890000 0x0 0x10000>; #sound-dai-cells = <0>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; rockchip,playback-channels = <8>; diff --git a/sys/gnu/dts/arm/rk3xxx.dtsi b/sys/gnu/dts/arm/rk3xxx.dtsi index 241f43e29c77..d929b60517ab 100644 --- a/sys/gnu/dts/arm/rk3xxx.dtsi +++ b/sys/gnu/dts/arm/rk3xxx.dtsi @@ -32,7 +32,7 @@ spi1 = &spi1; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -84,14 +84,14 @@ compatible = "arm,mali-400"; reg = <0x10090000 0x10000>; clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; - clock-names = "core", "bus"; + clock-names = "bus", "core"; assigned-clocks = <&cru ACLK_GPU>; assigned-clock-rates = <100000000>; resets = <&cru SRST_GPU>; status = "disabled"; }; - L2: l2-cache-controller@10138000 { + L2: cache-controller@10138000 { compatible = "arm,pl310-cache"; reg = <0x10138000 0x1000>; cache-unified; diff --git a/sys/gnu/dts/arm/rv1108.dtsi b/sys/gnu/dts/arm/rv1108.dtsi index 1fd06e7cb983..f9cfe2c80791 100644 --- a/sys/gnu/dts/arm/rv1108.dtsi +++ b/sys/gnu/dts/arm/rv1108.dtsi @@ -85,7 +85,7 @@ #clock-cells = <0>; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -102,7 +102,7 @@ }; }; - bus_intmem@10080000 { + bus_intmem: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x2000>; #address-cells = <1>; @@ -120,7 +120,6 @@ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; clock-names = "baudclk", "apb_pclk"; dmas = <&pdma 6>, <&pdma 7>; - #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart2m0_xfer>; status = "disabled"; @@ -136,7 +135,6 @@ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; dmas = <&pdma 4>, <&pdma 5>; - #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; status = "disabled"; @@ -152,7 +150,6 @@ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; dmas = <&pdma 2>, <&pdma 3>; - #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "disabled"; @@ -208,7 +205,6 @@ clock-names = "spiclk", "apb_pclk"; dmas = <&pdma 8>, <&pdma 9>; dma-names = "tx", "rx"; - #dma-cells = <2>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -370,7 +366,6 @@ reg = <0x1038c000 0x100>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #io-channel-cells = <1>; - clock-frequency = <1000000>; clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; clock-names = "saradc", "apb_pclk"; status = "disabled"; @@ -499,7 +494,6 @@ reg = <0x30140000 0x20000>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy>; - clock-names = "usbhost", "utmi"; phys = <&u2phy_host>; phy-names = "usb"; status = "disabled"; @@ -510,7 +504,6 @@ reg = <0x30160000 0x20000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy>; - clock-names = "usbhost", "utmi"; phys = <&u2phy_host>; phy-names = "usb"; status = "disabled"; @@ -527,7 +520,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy_otg>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/sys/gnu/dts/arm/sam9x60.dtsi b/sys/gnu/dts/arm/sam9x60.dtsi index 326b39328b58..6763423d64b8 100644 --- a/sys/gnu/dts/arm/sam9x60.dtsi +++ b/sys/gnu/dts/arm/sam9x60.dtsi @@ -686,6 +686,14 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k 0>; }; + + watchdog: watchdog@ffffff80 { + compatible = "microchip,sam9x60-wdt"; + reg = <0xffffff80 0x24>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + status = "disabled"; + }; }; }; }; diff --git a/sys/gnu/dts/arm/sama5d2.dtsi b/sys/gnu/dts/arm/sama5d2.dtsi index 2012b7407c60..ab550d69db91 100644 --- a/sys/gnu/dts/arm/sama5d2.dtsi +++ b/sys/gnu/dts/arm/sama5d2.dtsi @@ -695,7 +695,7 @@ }; rtc: rtc@f80480b0 { - compatible = "atmel,at91rm9200-rtc"; + compatible = "atmel,sama5d2-rtc"; reg = <0xf80480b0 0x30>; interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; diff --git a/sys/gnu/dts/arm/sama5d3.dtsi b/sys/gnu/dts/arm/sama5d3.dtsi index 203d40be70a5..f11b018e9173 100644 --- a/sys/gnu/dts/arm/sama5d3.dtsi +++ b/sys/gnu/dts/arm/sama5d3.dtsi @@ -159,8 +159,11 @@ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>, <&dma0 2 AT91_DMA_CFG_PER_ID(8)>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&twi0_clk>; @@ -174,8 +177,11 @@ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>, <&dma0 2 AT91_DMA_CFG_PER_ID(10)>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioC 27 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&twi1_clk>; @@ -357,8 +363,11 @@ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>, <&dma1 2 AT91_DMA_CFG_PER_ID(12)>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 19 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&twi2_clk>; @@ -639,6 +648,12 @@ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ }; + + pinctrl_i2c0_gpio: i2c0-gpio { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; i2c1 { @@ -647,6 +662,12 @@ <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ }; + + pinctrl_i2c1_gpio: i2c1-gpio { + atmel,pins = + <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; i2c2 { @@ -655,6 +676,12 @@ <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */ AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */ }; + + pinctrl_i2c2_gpio: i2c2-gpio { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; isi { diff --git a/sys/gnu/dts/arm/sama5d4.dtsi b/sys/gnu/dts/arm/sama5d4.dtsi index 6ab27a7b388d..c9c0316b5b0e 100644 --- a/sys/gnu/dts/arm/sama5d4.dtsi +++ b/sys/gnu/dts/arm/sama5d4.dtsi @@ -458,8 +458,11 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(3))>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; @@ -477,8 +480,11 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(5))>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioE 30 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; @@ -519,8 +525,11 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(7))>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; @@ -884,7 +893,7 @@ }; rtc@fc0686b0 { - compatible = "atmel,at91rm9200-rtc"; + compatible = "atmel,sama5d4-rtc"; reg = <0xfc0686b0 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; @@ -1122,6 +1131,12 @@ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; + + pinctrl_i2c0_gpio: i2c0-gpio { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; i2c1 { @@ -1130,6 +1145,12 @@ <AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* TWD1, conflicts with UART0 RX and DIBP */ AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */ }; + + pinctrl_i2c1_gpio: i2c1-gpio { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; i2c2 { @@ -1138,6 +1159,12 @@ <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* TWD2, conflicts with RD0 and PWML1 */ AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */ }; + + pinctrl_i2c2_gpio: i2c2-gpio { + atmel,pins = + <AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; isi { diff --git a/sys/gnu/dts/arm/sh73a0-kzm9g.dts b/sys/gnu/dts/arm/sh73a0-kzm9g.dts index 1916f31a30ff..5a8d92a061df 100644 --- a/sys/gnu/dts/arm/sh73a0-kzm9g.dts +++ b/sys/gnu/dts/arm/sh73a0-kzm9g.dts @@ -25,12 +25,9 @@ cpus { cpu@0 { cpu0-supply = <&vdd_dvfs>; - operating-points = < - /* kHz uV */ - 1196000 1315000 - 598000 1175000 - 398667 1065000 - >; + operating-points = <1196000 1315000>, /* kHz uV */ + < 598000 1175000>, + < 398667 1065000>; voltage-tolerance = <1>; /* 1% */ }; }; diff --git a/sys/gnu/dts/arm/socfpga_arria10.dtsi b/sys/gnu/dts/arm/socfpga_arria10.dtsi index 2a86e72d9791..3b8571b8b412 100644 --- a/sys/gnu/dts/arm/socfpga_arria10.dtsi +++ b/sys/gnu/dts/arm/socfpga_arria10.dtsi @@ -431,8 +431,8 @@ snps,perfect-filter-entries = <128>; tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; - clocks = <&l4_mp_clk>; - clock-names = "stmmaceth"; + clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; + clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; @@ -451,8 +451,8 @@ snps,perfect-filter-entries = <128>; tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; - clocks = <&l4_mp_clk>; - clock-names = "stmmaceth"; + clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; + clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; @@ -471,8 +471,8 @@ snps,perfect-filter-entries = <128>; tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; - clocks = <&l4_mp_clk>; - clock-names = "stmmaceth"; + clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; + clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; diff --git a/sys/gnu/dts/arm/socfpga_arria10_socdk_nand.dts b/sys/gnu/dts/arm/socfpga_arria10_socdk_nand.dts index 9bd9e04c7361..9aa897b79544 100644 --- a/sys/gnu/dts/arm/socfpga_arria10_socdk_nand.dts +++ b/sys/gnu/dts/arm/socfpga_arria10_socdk_nand.dts @@ -16,11 +16,11 @@ partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x1C00000>; + reg = <0x0 0x02000000>; }; partition@1c00000 { label = "Root Filesystem - JFFS2"; - reg = <0x1C00000 0x6400000>; + reg = <0x02000000 0x06000000>; }; }; }; diff --git a/sys/gnu/dts/arm/ste-ab8500.dtsi b/sys/gnu/dts/arm/ste-ab8500.dtsi index 14d4d8617d75..3cd6ee6d50e0 100644 --- a/sys/gnu/dts/arm/ste-ab8500.dtsi +++ b/sys/gnu/dts/arm/ste-ab8500.dtsi @@ -314,13 +314,13 @@ mcde@a0350000 { vana-supply = <&ab8500_ldo_ana_reg>; - dsi@a0351000 { + dsi-controller@a0351000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi@a0352000 { + dsi-controller@a0352000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi@a0353000 { + dsi-controller@a0353000 { vana-supply = <&ab8500_ldo_ana_reg>; }; }; diff --git a/sys/gnu/dts/arm/ste-ab8505.dtsi b/sys/gnu/dts/arm/ste-ab8505.dtsi index c72aa250bf6f..67bc69e67b33 100644 --- a/sys/gnu/dts/arm/ste-ab8505.dtsi +++ b/sys/gnu/dts/arm/ste-ab8505.dtsi @@ -261,13 +261,13 @@ mcde@a0350000 { vana-supply = <&ab8500_ldo_ana_reg>; - dsi@a0351000 { + dsi-controller@a0351000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi@a0352000 { + dsi-controller@a0352000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi@a0353000 { + dsi-controller@a0353000 { vana-supply = <&ab8500_ldo_ana_reg>; }; }; diff --git a/sys/gnu/dts/arm/ste-dbx5x0.dtsi b/sys/gnu/dts/arm/ste-dbx5x0.dtsi index 6671f74c9f03..3e10da3f8fd3 100644 --- a/sys/gnu/dts/arm/ste-dbx5x0.dtsi +++ b/sys/gnu/dts/arm/ste-dbx5x0.dtsi @@ -1097,7 +1097,7 @@ ranges; status = "disabled"; - dsi0: dsi@a0351000 { + dsi0: dsi-controller@a0351000 { compatible = "ste,mcde-dsi"; reg = <0xa0351000 0x1000>; clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>; @@ -1105,7 +1105,7 @@ #address-cells = <1>; #size-cells = <0>; }; - dsi1: dsi@a0352000 { + dsi1: dsi-controller@a0352000 { compatible = "ste,mcde-dsi"; reg = <0xa0352000 0x1000>; clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>; @@ -1113,7 +1113,7 @@ #address-cells = <1>; #size-cells = <0>; }; - dsi2: dsi@a0353000 { + dsi2: dsi-controller@a0353000 { compatible = "ste,mcde-dsi"; reg = <0xa0353000 0x1000>; /* This DSI port only has the Low Power / Energy Save clock */ diff --git a/sys/gnu/dts/arm/ste-href-stuib.dtsi b/sys/gnu/dts/arm/ste-href-stuib.dtsi index e32d0c36feb8..b8fd8f18ba16 100644 --- a/sys/gnu/dts/arm/ste-href-stuib.dtsi +++ b/sys/gnu/dts/arm/ste-href-stuib.dtsi @@ -199,7 +199,7 @@ mcde@a0350000 { status = "okay"; - dsi@a0351000 { + dsi-controller@a0351000 { panel { compatible = "samsung,s6d16d0"; reg = <0>; diff --git a/sys/gnu/dts/arm/ste-href-tvk1281618-r2.dtsi b/sys/gnu/dts/arm/ste-href-tvk1281618-r2.dtsi index e024520f4d47..de82b9db956f 100644 --- a/sys/gnu/dts/arm/ste-href-tvk1281618-r2.dtsi +++ b/sys/gnu/dts/arm/ste-href-tvk1281618-r2.dtsi @@ -66,7 +66,7 @@ mcde@a0350000 { status = "okay"; - dsi@a0351000 { + dsi-controller@a0351000 { panel { compatible = "samsung,s6d16d0"; reg = <0>; diff --git a/sys/gnu/dts/arm/ste-href-tvk1281618-r3.dtsi b/sys/gnu/dts/arm/ste-href-tvk1281618-r3.dtsi index cb3677f0a1cb..9f285c7cf914 100644 --- a/sys/gnu/dts/arm/ste-href-tvk1281618-r3.dtsi +++ b/sys/gnu/dts/arm/ste-href-tvk1281618-r3.dtsi @@ -45,7 +45,7 @@ mcde@a0350000 { status = "okay"; - dsi@a0351000 { + dsi-controller@a0351000 { panel { compatible = "sony,acx424akp"; reg = <0>; diff --git a/sys/gnu/dts/arm/ste-ux500-samsung-skomer.dts b/sys/gnu/dts/arm/ste-ux500-samsung-skomer.dts new file mode 100644 index 000000000000..292ed5286652 --- /dev/null +++ b/sys/gnu/dts/arm/ste-ux500-samsung-skomer.dts @@ -0,0 +1,581 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Devicetree for the Samsung XCover 2 GT-S7710 also known as Skomer. + */ + +/dts-v1/; +#include "ste-db8500.dtsi" +#include "ste-ab8505.dtsi" +#include "ste-dbx5x0-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Samsung XCover 2 (GT-S7710)"; + compatible = "samsung,skomer", "st-ericsson,u8500"; + + chosen { + stdout-path = &serial2; + }; + + /* TI TXS0206 level translator for 2.9 V */ + sd_level_translator: regulator-gpio { + compatible = "regulator-fixed"; + + /* GPIO87 EN */ + gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-name = "sd-level-translator"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; + + startup-delay-us = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_level_translator_default>; + }; + + /* External LDO MIC5366-3.3YMT for eMMC */ + ldo_3v3_reg: regulator-gpio-ldo-3v3 { + compatible = "regulator-fixed"; + regulator-name = "en-3v3-fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <5000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_ldo_en_default_mode>; + }; + + wlan_en: regulator-gpio-wlan-en { + compatible = "regulator-fixed"; + regulator-name = "wl-reg-on"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + startup-delay-us = <200000>; + /* GPIO215 WLAN_EN */ + gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_default_mode>; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_default>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default_mode>; + + button-home { + linux,code = <KEY_HOME>; + label = "HOME"; + /* GPIO91 */ + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + button-volup { + linux,code = <KEY_VOLUMEUP>; + label = "VOL+"; + /* GPIO67 */ + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + button-voldown { + linux,code = <KEY_VOLUMEDOWN>; + label = "VOL-"; + /* GPIO92 */ + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + button-menu { + linux,code = <KEY_MENU>; + label = "MENU"; + /* GPIO204 */ + gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + }; + button-back { + linux,code = <KEY_BACK>; + label = "BACK"; + /* GPIO205 */ + gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; + }; + }; + + /* + * FIXME: this is not quite GPIO backlight. This is a + * KTD253 one-wire GPIO-controlled backlight. It can + * work as a GPIO backlight. + */ + gpio_bl: backlight { + compatible = "gpio-backlight"; + /* GPIO 69 */ + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_backlight_default_mode>; + }; + + i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + /* TODO: this should be used by the NCP6914 Camera power management unit */ + }; + + i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_1_default>; + #address-cells = <1>; + #size-cells = <0>; + /* TODO: this should be used by the ALPS HSCDTD008A compass sensor */ + }; + + soc { + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + /* All direction control is used */ + st,sig-dir-cmd; + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-dat31; + st,sig-pin-fbclk; + full-pwr-cycle; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + vqmmc-supply = <&sd_level_translator>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc0_a_1_default>; + pinctrl-1 = <&mc0_a_1_sleep>; + status = "okay"; + }; + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + non-removable; + cap-sd-highspeed; + vmmc-supply = <&wlan_en>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc1_a_2_default>; + pinctrl-1 = <&mc1_a_2_sleep>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + /* GPIO216 WL_HOST_WAKE */ + interrupt-parent = <&gpio6>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_mode>; + }; + }; + + // eMMC + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + non-removable; + cap-mmc-highspeed; + mmc-ddr-1_8v; + vmmc-supply = <&ldo_3v3_reg>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc2_a_1_default>; + pinctrl-1 = <&mc2_a_1_sleep>; + + status = "okay"; + }; + + /* GBF (Bluetooth) UART */ + uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; + status = "okay"; + + /* FIXME: not quite working yet, probably needs regulators */ + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_mode>; + }; + }; + + /* GPF UART */ + uart@80121000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>; + }; + + /* Debugging console UART connected to AB8505 USB */ + uart@80007000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; + }; + + prcmu@80157000 { + ab8505 { + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + ab8505-regulators { + ab8500_ldo_aux1 { + /* Used for VDD for sensors */ + regulator-name = "AUX1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux2 { + /* Supplies the Cypress TMA140 touchscreen only with 3.3V */ + regulator-name = "AUX2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux3 { + /* Used for voltage for external MMC/SD card */ + regulator-name = "AUX3"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux4 { + regulator-name = "AUX4"; + /* Hammer to 3.0V for the display */ + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ab8500_ldo_aux5 { + regulator-name = "AUX5"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <2790000>; + regulator-always-on; + }; + + ab8500_ldo_aux6 { + regulator-name = "AUX6"; + /* Hammer to 1.8V for the display */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ab8500_ldo_aux8 { + /* Mostly VIO for sensors */ + regulator-name = "AUX8"; + }; + }; + }; + }; + + /* I2C0 */ + i2c@80004000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + + proximity@44 { + compatible = "sharp,gp2ap002s00f"; + clock-frequency = <400000>; + reg = <0x44>; + + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vio-supply = <&ab8500_ldo_aux8_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gp2ap002_skomer_default>; + sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>; + }; + }; + + + /* I2C2 */ + i2c@80128000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; + + accel@18 { + compatible = "bosch,bma254"; + clock-frequency = <400000>; + reg = <0x18>; + + /* GPIO224 used as "smart alert" interrupt */ + interrupt-parent = <&gpio7>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&ab8500_ldo_aux8_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&bma254_skomer_default>; + }; + }; + + /* I2C3 */ + i2c@80110000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; + + /* TODO: this should be used by the Cypress TMA140 touchscreen */ + }; + + mcde@a0350000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dsi_default_mode>; + + dsi-controller@a0351000 { + panel { + /* NT35510-based Hydis HVA40WV1 */ + compatible = "hydis,hva40wv1", "novatek,nt35510"; + reg = <0>; + /* v_lcd_3v0 2.3-4.8V */ + vdd-supply = <&ab8500_ldo_aux4_reg>; + /* v_lcd_1v8 1.65-3.3V */ + vddi-supply = <&ab8500_ldo_aux6_reg>; + /* GPIO 139 */ + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&display_default_mode>; + backlight = <&gpio_bl>; + }; + }; + }; + }; +}; + +&pinctrl { + /* + * This extends the MC0 default config to include DAT32DIR + * which is used by this machine. If we don't do this the + * SD card does not work. + */ + sdi0 { + mc0_a_1_default { + default_mux { + function = "mc0"; + /* This machine uses the DAT31 pin */ + groups = "mc0_a_1", "mc0dat31dir_a_1"; + }; + default_cfg5 { + pins = "GPIO21_AB3"; /* DAT31DIR */ + ste,config = <&out_hi>; + }; + }; + }; + + mcde { + dsi_default_mode: dsi_default { + default_mux1 { + /* Mux in VSI0 used for DSI TE */ + function = "lcd"; + groups = "lcdvsi0_a_1"; /* VSI0 for LCD */ + }; + default_cfg1 { + pins = "GPIO68_E1"; /* VSI0 */ + ste,config = <&in_nopull>; + }; + }; + }; + + /* Two GPIO lines used by the display */ + display { + display_default_mode: display_default { + skomer_cfg1 { + /* + * OLED DETECT or check_pba, this appears to be high + * on "PBA" which I guess is "prototype board A". + */ + pins = "GPIO93_B7"; + ste,config = <&gpio_in_nopull>; + }; + skomer_cfg2 { + pins = "GPIO139_C9"; + /* + * MIPI_DSI0_RESET_N resets the display, leave high + * (de-asserted) so we only assert reset explicitly + * from the display driver. + */ + ste,config = <&gpio_out_hi>; + }; + }; + }; + backlight { + gpio_backlight_default_mode: backlight_default { + skomer_cfg1 { + pins = "GPIO69_E2"; /* LCD_BL_CTRL */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* GPIO that enables the 2.9V SD card level translator */ + sd-level-translator { + sd_level_translator_default: sd_level_translator_default { + /* level shifter on GPIO87 */ + skomer_cfg1 { + pins = "GPIO87_B3"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the eMMC */ + emmc-ldo { + emmc_ldo_en_default_mode: emmc_ldo_default { + /* LDO enable on GPIO223 */ + skomer_cfg1 { + pins = "GPIO223_AH9"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO keys */ + gpio-keys { + gpio_keys_default_mode: gpio_keys_default { + skomer_cfg1 { + pins = "GPIO67_G2", /* VOL UP */ + "GPIO91_B6", /* HOME */ + "GPIO92_D6", /* VOL DOWN */ + "GPIO204_AF23", /* MENU */ + "GPIO205_AG23"; /* BACK */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + /* Interrupt line for BMA254 */ + bma254 { + bma254_skomer_default: bma254_skomer { + skomer_cfg1 { + pins = "GPIO224_AG9"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + /* Interrupt line for light/proximity sensor GP2AP002 */ + gp2ap002 { + gp2ap002_skomer_default: gp2ap002_skomer { + skomer_cfg1 { + pins = "GPIO146_D13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for NCP6914 */ + i2c-gpio-0 { + i2c_gpio_0_default: i2c_gpio_0 { + skomer_cfg1 { + pins = "GPIO143_D12", "GPIO144_B13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for ALPS HSCD compass */ + i2c-gpio-1 { + i2c_gpio_1_default: i2c_gpio_1 { + skomer_cfg1 { + pins = "GPIO151_B17", "GPIO152_D16"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + wlan { + wlan_default_mode: wlan_default { + skomer_cfg1 { + pins = "GPIO216_AG12"; + ste,config = <&gpio_in_pd>; + }; + }; + wlan_en_default_mode: wlan_en_default { + skomer_cfg2 { + pins = "GPIO215_AH13"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + bluetooth { + bluetooth_default_mode: bluetooth_default { + skomer_cfg1 { + pins = "GPIO199_AH23", "GPIO222_AJ9"; + ste,config = <&gpio_out_lo>; + }; + skomer_cfg2 { + pins = "GPIO97_D9"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + vibrator { + vibrator_default: vibrator_default { + skomer_cfg1 { + pins = "GPIO195_AG28"; /* MOT_EN */ + ste,config = <&gpio_out_lo>; + }; + }; + }; +}; + +&ab8505_gpio { + /* Hog a few default settings */ + pinctrl-names = "default"; + pinctrl-0 = <&gpio_default>; + + gpio { + gpio_default: gpio_default { + skomer_mux { + /* Change unused pins to GPIO mode */ + function = "gpio"; + groups = "gpio3_a_1", /* default: SysClkReq4 */ + "gpio14_a_1"; /* default: PWMOut1 */ + }; + skomer_cfg1 { + pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4"; + bias-disable; + }; + }; + }; +}; diff --git a/sys/gnu/dts/arm/stm32746g-eval.dts b/sys/gnu/dts/arm/stm32746g-eval.dts index fcc804e3c158..4ea3f98dd275 100644 --- a/sys/gnu/dts/arm/stm32746g-eval.dts +++ b/sys/gnu/dts/arm/stm32746g-eval.dts @@ -165,7 +165,7 @@ interrupts = <8 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gpioi>; - stmfx_pinctrl: stmfx-pin-controller { + stmfx_pinctrl: pinctrl { compatible = "st,stmfx-0300-pinctrl"; gpio-controller; #gpio-cells = <2>; diff --git a/sys/gnu/dts/arm/stm32mp15-pinctrl.dtsi b/sys/gnu/dts/arm/stm32mp15-pinctrl.dtsi index 0237d4ddaa92..73c07f0dfad2 100644 --- a/sys/gnu/dts/arm/stm32mp15-pinctrl.dtsi +++ b/sys/gnu/dts/arm/stm32mp15-pinctrl.dtsi @@ -162,6 +162,40 @@ }; }; + ethernet0_rmii_pins_a: rmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF0)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + bias-disable; + }; + }; + + ethernet0_rmii_pins_sleep_a: rmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; + }; + fmc_pins_a: fmc-0 { pins1 { pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ @@ -685,6 +719,26 @@ }; }; + + sai2a_pins_b: sai2a-2 { + pins1 { + pinmux = <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ + <STM32_PINMUX('D', 13, AF10)>; /* SAI2_SCK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_b: sai2a-sleep-3 { + pins { + pinmux = <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ + <STM32_PINMUX('D', 13, ANALOG)>; /* SAI2_SCK_A */ + }; + }; + sai2b_pins_a: sai2b-0 { pins1 { pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ @@ -1000,6 +1054,19 @@ }; }; + usart3_pins_a: usart3-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */ + bias-disable; + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ @@ -1040,6 +1107,32 @@ bias-disable; }; }; + + uart8_pins_a: uart8-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */ + bias-disable; + }; + }; + + usbotg_hs_pins_a: usbotg-hs-0 { + pins { + pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */ + }; + }; + + usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */ + <STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */ + }; + }; }; &pinctrl_z { diff --git a/sys/gnu/dts/arm/stm32mp151.dtsi b/sys/gnu/dts/arm/stm32mp151.dtsi index fb41d0778b00..3ea05ba48215 100644 --- a/sys/gnu/dts/arm/stm32mp151.dtsi +++ b/sys/gnu/dts/arm/stm32mp151.dtsi @@ -17,6 +17,7 @@ cpu0: cpu@0 { compatible = "arm,cortex-a7"; + clock-frequency = <650000000>; device_type = "cpu"; reg = <0>; }; @@ -483,6 +484,7 @@ resets = <&rcc I2C1_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -496,6 +498,7 @@ resets = <&rcc I2C2_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -509,6 +512,7 @@ resets = <&rcc I2C3_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -522,6 +526,7 @@ resets = <&rcc I2C5_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -959,6 +964,7 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc DMA1>; + resets = <&rcc DMA1_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -976,6 +982,7 @@ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc DMA2>; + resets = <&rcc DMA2_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -989,6 +996,7 @@ dma-masters = <&dma1 &dma2>; dma-channels = <16>; clocks = <&rcc DMAMUX>; + resets = <&rcc DMAMUX_R>; }; adc: adc@48003000 { @@ -1044,7 +1052,7 @@ }; usbotg_hs: usb-otg@49000000 { - compatible = "snps,dwc2"; + compatible = "st,stm32mp15-hsotg", "snps,dwc2"; reg = <0x49000000 0x10000>; clocks = <&rcc USBO_K>; clock-names = "otg"; @@ -1055,6 +1063,7 @@ g-np-tx-fifo-size = <32>; g-tx-fifo-size = <128 128 64 64 64 64 32 32>; dr_mode = "otg"; + usb33d-supply = <&usb33>; status = "disabled"; }; @@ -1280,6 +1289,7 @@ reg = <0x58000000 0x1000>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc MDMA>; + resets = <&rcc MDMA_R>; #dma-cells = <5>; dma-channels = <32>; dma-requests = <48>; @@ -1369,10 +1379,12 @@ clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx", + "eth-ck", "ethstp"; clocks = <&rcc ETHMAC>, <&rcc ETHTX>, <&rcc ETHRX>, + <&rcc ETHCK_K>, <&rcc ETHSTP>; st,syscon = <&syscfg 0x4>; snps,mixed-burst; @@ -1473,6 +1485,7 @@ resets = <&rcc I2C4_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -1508,6 +1521,7 @@ resets = <&rcc I2C6_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; diff --git a/sys/gnu/dts/arm/stm32mp153.dtsi b/sys/gnu/dts/arm/stm32mp153.dtsi index 2d759fc6015c..6d9ab08667fc 100644 --- a/sys/gnu/dts/arm/stm32mp153.dtsi +++ b/sys/gnu/dts/arm/stm32mp153.dtsi @@ -10,6 +10,7 @@ cpus { cpu1: cpu@1 { compatible = "arm,cortex-a7"; + clock-frequency = <650000000>; device_type = "cpu"; reg = <1>; }; diff --git a/sys/gnu/dts/arm/stm32mp157a-avenger96.dts b/sys/gnu/dts/arm/stm32mp157a-avenger96.dts index cbfa4075907e..425175f7d83c 100644 --- a/sys/gnu/dts/arm/stm32mp157a-avenger96.dts +++ b/sys/gnu/dts/arm/stm32mp157a-avenger96.dts @@ -135,10 +135,6 @@ #interrupt-cells = <2>; status = "okay"; - st,main-control-register = <0x04>; - st,vin-control-register = <0xc0>; - st,usb-control-register = <0x30>; - regulators { compatible = "st,stpmic1-regulators"; @@ -173,7 +169,6 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; - st,mask_reset; regulator-initial-mode = <0>; regulator-over-current-protection; }; @@ -213,8 +208,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; interrupt-parent = <&pmic>; }; @@ -240,7 +233,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -300,7 +292,8 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; diff --git a/sys/gnu/dts/arm/stm32mp157c-dhcom-pdk2.dts b/sys/gnu/dts/arm/stm32mp157c-dhcom-pdk2.dts new file mode 100644 index 000000000000..af99e132e1b1 --- /dev/null +++ b/sys/gnu/dts/arm/stm32mp157c-dhcom-pdk2.dts @@ -0,0 +1,265 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2019 Marek Vasut <marex@denx.de> + */ + +#include "stm32mp157c-dhcom-som.dtsi" +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "STMicroelectronics STM32MP157C DHCOM Premium Developer Kit (2)"; + compatible = "dh,stm32mp157c-dhcom-pdk2", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart8; + ethernet0 = ðernet0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clk_ext_audio_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + display_bl: display-bl { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; + default-brightness-level = <8>; + enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + ethernet_vio: vioregulator { + compatible = "regulator-fixed"; + regulator-name = "vio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + }; + + panel { + compatible = "edt,etm0700g0edh6"; + backlight = <&display_bl>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + sound { + compatible = "audio-graph-card"; + routing = + "MIC_IN", "Capture", + "Capture", "Mic Bias", + "Playback", "HP_OUT"; + dais = <&sai2a_port &sai2b_port>; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default"; + pinctrl-0 = <&cec_pins_a>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + phy-handle = <&phy0>; + st,eth-ref-clk-sel; + phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + VDDA-supply = <&v3v3>; + VDDIO-supply = <&vdd>; + + sgtl5000_port: port { + #address-cells = <1>; + #size-cells = <0>; + + sgtl5000_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + + sgtl5000_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + }; + + }; + + polytouch@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpiog>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ + linux,wakeup; + }; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_b>; + pinctrl-1 = <<dc_pins_sleep_b>; + status = "okay"; + + port { + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_a>; + pinctrl-1 = <&m_can1_sleep_pins_a>; + status = "okay"; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&sgtl5000_tx_endpoint>; + format = "i2s"; + mclk-fs = <512>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; + }; + + sai2b: audio-controller@4400b024 { + dma-names = "rx"; + st,sync = <&sai2a 2>; + clocks = <&rcc SAI2_K>, <&sai2a>; + clock-names = "sai_ck", "MCLK"; + status = "okay"; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&sgtl5000_rx_endpoint>; + format = "i2s"; + mclk-fs = <512>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; + }; +}; + +&timers2 { + /* spare dmas for other usage (un-delete to enable pwm capture) */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + pwm2: pwm { + pinctrl-0 = <&pwm2_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + timer@1 { + status = "okay"; + }; +}; + +&usart3 { + pinctrl-names = "default"; + pinctrl-0 = <&usart3_pins_a>; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/sys/gnu/dts/arm/stm32mp157c-dhcom-som.dtsi b/sys/gnu/dts/arm/stm32mp157c-dhcom-som.dtsi new file mode 100644 index 000000000000..f81dc3134135 --- /dev/null +++ b/sys/gnu/dts/arm/stm32mp157c-dhcom-som.dtsi @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2019 Marek Vasut <marex@denx.de> + */ +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + memory@c0000000 { + device_type = "memory"; + reg = <0xC0000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; +}; + +&adc { + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "okay"; + + adc1: adc@0 { + st,min-sample-time-nsecs = <5000>; + st,adc-channels = <0>; + status = "okay"; + }; + + adc2: adc@100 { + st,adc-channels = <1>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +&dac { + pinctrl-names = "default"; + pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; + vref-supply = <&vdda>; + status = "okay"; + + dac1: dac@1 { + status = "okay"; + }; + dac2: dac@2 { + status = "okay"; + }; +}; + +&dts { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + rtc@32 { + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v2v8: ldo2 { + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; + + touchscreen@49 { + compatible = "ti,tsc2004"; + reg = <0x49>; + vio-supply = <&v3v3>; + interrupts-extended = <&gpioh 3 IRQ_TYPE_EDGE_FALLING>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: mx66l51235l@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; + broken-cd; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/sys/gnu/dts/arm/stm32mp157c-ed1.dts b/sys/gnu/dts/arm/stm32mp157c-ed1.dts index 1fc43251d697..9d2592db630c 100644 --- a/sys/gnu/dts/arm/stm32mp157c-ed1.dts +++ b/sys/gnu/dts/arm/stm32mp157c-ed1.dts @@ -130,10 +130,12 @@ }; &i2c4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; + clock-frequency = <400000>; status = "okay"; /* spare dmas for other usage */ /delete-property/dmas; @@ -218,8 +220,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; }; @@ -241,7 +241,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -313,7 +312,8 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; @@ -334,7 +334,7 @@ st,neg-edge; bus-width = <8>; vmmc-supply = <&v3v3>; - vqmmc-supply = <&v3v3>; + vqmmc-supply = <&vdd>; mmc-ddr-3_3v; status = "okay"; }; @@ -355,6 +355,10 @@ status = "okay"; }; +&usbotg_hs { + vbus-supply = <&vbus_otg>; +}; + &usbphyc_port0 { phy-supply = <&vdd_usb>; vdda1v1-supply = <®11>; diff --git a/sys/gnu/dts/arm/stm32mp157c-ev1.dts b/sys/gnu/dts/arm/stm32mp157c-ev1.dts index 228e35e16884..8a4c7ff31a92 100644 --- a/sys/gnu/dts/arm/stm32mp157c-ev1.dts +++ b/sys/gnu/dts/arm/stm32mp157c-ev1.dts @@ -174,8 +174,9 @@ }; &i2c2 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_pins_a>; + pinctrl-1 = <&i2c2_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -210,7 +211,7 @@ interrupt-parent = <&gpioi>; vdd-supply = <&v3v3>; - stmfx_pinctrl: stmfx-pin-controller { + stmfx_pinctrl: pinctrl { compatible = "st,stmfx-0300-pinctrl"; gpio-controller; #gpio-cells = <2>; @@ -218,7 +219,7 @@ #interrupt-cells = <2>; gpio-ranges = <&stmfx_pinctrl 0 0 24>; - joystick_pins: joystick { + joystick_pins: joystick-pins { pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; bias-pull-down; }; @@ -227,8 +228,9 @@ }; &i2c5 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c5_pins_a>; + pinctrl-1 = <&i2c5_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -353,7 +355,8 @@ }; &usbotg_hs { - dr_mode = "peripheral"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; status = "okay"; diff --git a/sys/gnu/dts/arm/stm32mp15xx-dkx.dtsi b/sys/gnu/dts/arm/stm32mp15xx-dkx.dtsi index f6672e87aef3..d946e0a02f5c 100644 --- a/sys/gnu/dts/arm/stm32mp15xx-dkx.dtsi +++ b/sys/gnu/dts/arm/stm32mp15xx-dkx.dtsi @@ -216,10 +216,12 @@ }; &i2c4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; + clock-frequency = <400000>; status = "okay"; /* spare dmas for other usage */ /delete-property/dmas; @@ -304,8 +306,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; }; @@ -328,7 +328,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -479,7 +478,8 @@ pinctrl-0 = <&sdmmc1_b4_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,neg-edge; bus-width = <4>; vmmc-supply = <&v3v3>; diff --git a/sys/gnu/dts/arm/sun5i-a13-pocketbook-touch-lux-3.dts b/sys/gnu/dts/arm/sun5i-a13-pocketbook-touch-lux-3.dts new file mode 100644 index 000000000000..e9ef97c9c893 --- /dev/null +++ b/sys/gnu/dts/arm/sun5i-a13-pocketbook-touch-lux-3.dts @@ -0,0 +1,257 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright 2019 Ondrej Jirman <megous@megous.com> + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "PocketBook Touch Lux 3"; + compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + power { + gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */ + default-state = "on"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + label = "GPIO Keys"; + + key-right { + label = "Right"; + linux,code = <KEY_RIGHT>; + gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */ + }; + + key-left { + label = "Left"; + linux,code = <KEY_LEFT>; + gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */ + }; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vdd-1v8-nor-ctp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_1v8_nor: regulator-nor { + compatible = "regulator-fixed"; + regulator-name = "vdd-nor"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_1v8>; + regulator-always-on; + }; + + reg_1v8_ctp: regulator-ctp { + compatible = "regulator-fixed"; + regulator-name = "vdd-ctp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_1v8>; + }; + + reg_3v3_mmc0: regulator-mmc0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-mmc0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */ + vin-supply = <®_vcc3v3>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + status = "okay"; + + /* Touchpanel is connected here. */ +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-200 { + label = "Home"; + linux,code = <KEY_HOME>; + channel = <0>; + voltage = <200000>; + }; + + button-400 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + vmmc-supply = <®_3v3_mmc0>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pc_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + /* We need this otherwise the LDO3 would overload */ + regulator-soft-start; + regulator-ramp-delay = <1600>; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>; + status = "okay"; + + epd_flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "macronix,mx25u4033", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <4000000>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pg_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/sys/gnu/dts/arm/sun5i.dtsi b/sys/gnu/dts/arm/sun5i.dtsi index 0b526e6e5a95..e6b036734a64 100644 --- a/sys/gnu/dts/arm/sun5i.dtsi +++ b/sys/gnu/dts/arm/sun5i.dtsi @@ -186,6 +186,8 @@ compatible = "allwinner,sun5i-a13-mbus"; reg = <0x01c01000 0x1000>; clocks = <&ccu CLK_MBUS>; + #address-cells = <1>; + #size-cells = <1>; dma-ranges = <0x00000000 0x40000000 0x20000000>; #interconnect-cells = <1>; }; @@ -771,9 +773,6 @@ interconnect-names = "dma-mem"; status = "disabled"; - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/sys/gnu/dts/arm/sun6i-a31.dtsi b/sys/gnu/dts/arm/sun6i-a31.dtsi index 7762fbd9a133..f3425a66fc0a 100644 --- a/sys/gnu/dts/arm/sun6i-a31.dtsi +++ b/sys/gnu/dts/arm/sun6i-a31.dtsi @@ -1139,9 +1139,6 @@ "ram"; resets = <&ccu RST_AHB1_BE1>; - assigned-clocks = <&ccu CLK_BE1>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -1185,9 +1182,6 @@ "ram"; resets = <&ccu RST_AHB1_DRC1>; - assigned-clocks = <&ccu CLK_IEP_DRC1>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -1231,9 +1225,6 @@ "ram"; resets = <&ccu RST_AHB1_BE0>; - assigned-clocks = <&ccu CLK_BE0>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -1274,9 +1265,6 @@ "ram"; resets = <&ccu RST_AHB1_DRC0>; - assigned-clocks = <&ccu CLK_IEP_DRC0>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/sys/gnu/dts/arm/sun7i-a20-linutronix-testbox-v2.dts b/sys/gnu/dts/arm/sun7i-a20-linutronix-testbox-v2.dts new file mode 100644 index 000000000000..da5a2eea4ce3 --- /dev/null +++ b/sys/gnu/dts/arm/sun7i-a20-linutronix-testbox-v2.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2020 Linutronix GmbH + * Author: Benedikt Spranger <b.spranger@linutronix.de> + */ + +/dts-v1/; +#include "sun7i-a20-lamobo-r1.dts" + +/ { + model = "Lamobo R1"; + compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20"; + + leds { + led-opto1 { + label = "lamobo_r1:opto:powerswitch"; + gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>; + }; + + led-opto2 { + label = "lamobo_r1:opto:relay"; + gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + status = "okay"; + }; + + atecc508a@60 { + compatible = "atmel,atecc508a"; + reg = <0x60>; + }; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can_ph_pins>; + status = "okay"; +}; diff --git a/sys/gnu/dts/arm/sun7i-a20.dtsi b/sys/gnu/dts/arm/sun7i-a20.dtsi index 92b5be97085d..ffe1d10a1a84 100644 --- a/sys/gnu/dts/arm/sun7i-a20.dtsi +++ b/sys/gnu/dts/arm/sun7i-a20.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/clock/sun7i-a20-ccu.h> #include <dt-bindings/reset/sun4i-a10-ccu.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&gic>; @@ -404,11 +405,12 @@ }; tcon0: lcd-controller@1c0c000 { - compatible = "allwinner,sun7i-a20-tcon"; + compatible = "allwinner,sun7i-a20-tcon0", + "allwinner,sun7i-a20-tcon"; reg = <0x01c0c000 0x1000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - resets = <&ccu RST_TCON0>; - reset-names = "lcd"; + resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>; + reset-names = "lcd", "lvds"; clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_TCON0_CH0>, <&ccu CLK_TCON0_CH1>; @@ -454,7 +456,8 @@ }; tcon1: lcd-controller@1c0d000 { - compatible = "allwinner,sun7i-a20-tcon"; + compatible = "allwinner,sun7i-a20-tcon1", + "allwinner,sun7i-a20-tcon"; reg = <0x01c0d000 0x1000>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; resets = <&ccu RST_TCON1>; @@ -932,6 +935,20 @@ }; /omit-if-no-ref/ + lcd_lvds0_pins: lcd-lvds0-pins { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD6", "PD7", "PD8", "PD9"; + function = "lvds0"; + }; + + /omit-if-no-ref/ + lcd_lvds1_pins: lcd-lvds1-pins { + pins = "PD10", "PD11", "PD12", "PD13", "PD14", + "PD15", "PD16", "PD17", "PD18", "PD19"; + function = "lvds1"; + }; + + /omit-if-no-ref/ mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; diff --git a/sys/gnu/dts/arm/sun8i-a23-a33.dtsi b/sys/gnu/dts/arm/sun8i-a23-a33.dtsi index 48487f6d4ab9..c1362d0f0ff8 100644 --- a/sys/gnu/dts/arm/sun8i-a23-a33.dtsi +++ b/sys/gnu/dts/arm/sun8i-a23-a33.dtsi @@ -684,9 +684,6 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_BUS_DRC>; - assigned-clocks = <&ccu CLK_DRC>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/sys/gnu/dts/arm/sun8i-a33.dtsi b/sys/gnu/dts/arm/sun8i-a33.dtsi index a2c37adacf77..cfd3858afb3e 100644 --- a/sys/gnu/dts/arm/sun8i-a33.dtsi +++ b/sys/gnu/dts/arm/sun8i-a33.dtsi @@ -372,8 +372,6 @@ "ram", "sat"; resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; reset-names = "be", "sat"; - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; }; &ccu { diff --git a/sys/gnu/dts/arm/sun8i-a83t-tbs-a711.dts b/sys/gnu/dts/arm/sun8i-a83t-tbs-a711.dts index e8b3669e0e5d..bfc9bb277a49 100644 --- a/sys/gnu/dts/arm/sun8i-a83t-tbs-a711.dts +++ b/sys/gnu/dts/arm/sun8i-a83t-tbs-a711.dts @@ -493,7 +493,6 @@ }; &usb_otg { - dr_mode = "otg"; status = "okay"; }; diff --git a/sys/gnu/dts/arm/sun8i-a83t.dtsi b/sys/gnu/dts/arm/sun8i-a83t.dtsi index e7b9bef1be6b..655404d6d3a3 100644 --- a/sys/gnu/dts/arm/sun8i-a83t.dtsi +++ b/sys/gnu/dts/arm/sun8i-a83t.dtsi @@ -72,7 +72,7 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C0CPUX>; @@ -83,7 +83,7 @@ #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C0CPUX>; @@ -94,7 +94,7 @@ #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C0CPUX>; @@ -116,7 +116,7 @@ #cooling-cells = <2>; }; - cpu@101 { + cpu101: cpu@101 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C1CPUX>; @@ -127,7 +127,7 @@ #cooling-cells = <2>; }; - cpu@102 { + cpu102: cpu@102 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C1CPUX>; @@ -138,7 +138,7 @@ #cooling-cells = <2>; }; - cpu@103 { + cpu103: cpu@103 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C1CPUX>; @@ -314,7 +314,7 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-a83t-de2-clk"; - reg = <0x01000000 0x100000>; + reg = <0x01000000 0x10000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_PLL_DE>; clock-names = "bus", @@ -324,6 +324,17 @@ #reset-cells = <1>; }; + rotate: rotate@1020000 { + compatible = "allwinner,sun8i-a83t-de2-rotate"; + reg = <0x1020000 0x10000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&display_clocks CLK_BUS_ROT>, + <&display_clocks CLK_ROT>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_ROT>; + }; + mixer0: mixer@1100000 { compatible = "allwinner,sun8i-a83t-de2-mixer-0"; reg = <0x01100000 0x100000>; @@ -1188,12 +1199,60 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; + + trips { + cpu0_hot: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_very_hot: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu1_thermal: cpu1-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 1>; + + trips { + cpu1_hot: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_very_hot: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu1_hot>; + cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpu_thermal: gpu-thermal { diff --git a/sys/gnu/dts/arm/sun8i-h3.dtsi b/sys/gnu/dts/arm/sun8i-h3.dtsi index 20217e2ca4d3..e83aa6866e7e 100644 --- a/sys/gnu/dts/arm/sun8i-h3.dtsi +++ b/sys/gnu/dts/arm/sun8i-h3.dtsi @@ -41,6 +41,7 @@ */ #include "sunxi-h3-h5.dtsi" +#include <dt-bindings/thermal/thermal.h> / { cpu0_opp_table: opp_table0 { @@ -227,6 +228,30 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; + + trips { + cpu_hot_trip: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_very_hot_trip: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu_hot_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; }; diff --git a/sys/gnu/dts/arm/sun8i-r40.dtsi b/sys/gnu/dts/arm/sun8i-r40.dtsi index a9d5d6ddbd71..b782041e0e04 100644 --- a/sys/gnu/dts/arm/sun8i-r40.dtsi +++ b/sys/gnu/dts/arm/sun8i-r40.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/clock/sun8i-tcon-top.h> #include <dt-bindings/reset/sun8i-r40-ccu.h> #include <dt-bindings/reset/sun8i-de2.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <1>; @@ -110,6 +111,22 @@ status = "disabled"; }; + thermal-zones { + cpu_thermal: cpu0-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + gpu_thermal: gpu-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -119,7 +136,7 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-r40-de2-clk", "allwinner,sun8i-h3-de2-clk"; - reg = <0x01000000 0x100000>; + reg = <0x01000000 0x10000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; clock-names = "bus", @@ -562,6 +579,17 @@ clocks = <&osc24M>; }; + ths: thermal-sensor@1c24c00 { + compatible = "allwinner,sun8i-r40-ths"; + reg = <0x01c24c00 0x100>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_THS>; + /* TODO: add nvmem-cells for calibration */ + #thermal-sensor-cells = <1>; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -738,6 +766,8 @@ compatible = "allwinner,sun8i-r40-mbus"; reg = <0x01c62000 0x1000>; clocks = <&ccu 155>; + #address-cells = <1>; + #size-cells = <1>; dma-ranges = <0x00000000 0x40000000 0x80000000>; #interconnect-cells = <1>; }; diff --git a/sys/gnu/dts/arm/sun8i-v3s.dtsi b/sys/gnu/dts/arm/sun8i-v3s.dtsi index 81ea50838cd5..e5312869c0d2 100644 --- a/sys/gnu/dts/arm/sun8i-v3s.dtsi +++ b/sys/gnu/dts/arm/sun8i-v3s.dtsi @@ -105,7 +105,7 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-v3s-de2-clk"; - reg = <0x01000000 0x100000>; + reg = <0x01000000 0x10000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; clock-names = "bus", diff --git a/sys/gnu/dts/arm/sunxi-h3-h5.dtsi b/sys/gnu/dts/arm/sunxi-h3-h5.dtsi index 5e9c3060aa08..01a5df9aa71b 100644 --- a/sys/gnu/dts/arm/sunxi-h3-h5.dtsi +++ b/sys/gnu/dts/arm/sunxi-h3-h5.dtsi @@ -114,7 +114,7 @@ display_clocks: clock@1000000 { /* compatible is in per SoC .dtsi file */ - reg = <0x01000000 0x100000>; + reg = <0x01000000 0x10000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; clock-names = "bus", @@ -560,6 +560,8 @@ compatible = "allwinner,sun8i-h3-mbus"; reg = <0x01c62000 0x1000>; clocks = <&ccu CLK_MBUS>; + #address-cells = <1>; + #size-cells = <1>; dma-ranges = <0x00000000 0x40000000 0xc0000000>; #interconnect-cells = <1>; }; @@ -892,6 +894,21 @@ pins = "PL0", "PL1"; function = "s_i2c"; }; + + r_pwm_pin: r-pwm-pin { + pins = "PL10"; + function = "s_pwm"; + }; + }; + + r_pwm: pwm@1f03800 { + compatible = "allwinner,sun8i-h3-pwm"; + reg = <0x01f03800 0x8>; + pinctrl-names = "default"; + pinctrl-0 = <&r_pwm_pin>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; }; }; }; diff --git a/sys/gnu/dts/arm/tango4-common.dtsi b/sys/gnu/dts/arm/tango4-common.dtsi index ff72a8efb73d..54fd522badfc 100644 --- a/sys/gnu/dts/arm/tango4-common.dtsi +++ b/sys/gnu/dts/arm/tango4-common.dtsi @@ -85,7 +85,7 @@ }; uart: serial@10700 { - compatible = "ralink,rt2880-uart"; + compatible = "ralink,rt2880-uart", "ns16550a"; reg = <0x10700 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <7372800>; diff --git a/sys/gnu/dts/arm/tegra114-dalmore.dts b/sys/gnu/dts/arm/tegra114-dalmore.dts index 97a5c3504bbe..d3e032e7d21a 100644 --- a/sys/gnu/dts/arm/tegra114-dalmore.dts +++ b/sys/gnu/dts/arm/tegra114-dalmore.dts @@ -1296,7 +1296,13 @@ clocks = <&tegra_car TEGRA114_CLK_PLL_A>, <&tegra_car TEGRA114_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA114_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA114_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA114_CLK_EXTERN1>; }; }; diff --git a/sys/gnu/dts/arm/tegra114.dtsi b/sys/gnu/dts/arm/tegra114.dtsi index 0d7a6327e404..450a1f1b12a0 100644 --- a/sys/gnu/dts/arm/tegra114.dtsi +++ b/sys/gnu/dts/arm/tegra114.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/memory/tegra114-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra114"; @@ -514,11 +515,12 @@ status = "disabled"; }; - pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra114-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; }; fuse@7000f800 { diff --git a/sys/gnu/dts/arm/tegra124-apalis-v1.2.dtsi b/sys/gnu/dts/arm/tegra124-apalis-v1.2.dtsi index 0462ed2dd8b8..de499f736bda 100644 --- a/sys/gnu/dts/arm/tegra124-apalis-v1.2.dtsi +++ b/sys/gnu/dts/arm/tegra124-apalis-v1.2.dtsi @@ -2009,8 +2009,14 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; }; thermal-zones { diff --git a/sys/gnu/dts/arm/tegra124-apalis.dtsi b/sys/gnu/dts/arm/tegra124-apalis.dtsi index d1e8593ef0d9..d70a86da4ee4 100644 --- a/sys/gnu/dts/arm/tegra124-apalis.dtsi +++ b/sys/gnu/dts/arm/tegra124-apalis.dtsi @@ -2001,8 +2001,14 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; }; thermal-zones { diff --git a/sys/gnu/dts/arm/tegra124-jetson-tk1.dts b/sys/gnu/dts/arm/tegra124-jetson-tk1.dts index d5fd642f8b77..1b567e2d5ce0 100644 --- a/sys/gnu/dts/arm/tegra124-jetson-tk1.dts +++ b/sys/gnu/dts/arm/tegra124-jetson-tk1.dts @@ -1782,12 +1782,6 @@ }; ports { - /* Micro A/B */ - usb2-0 { - status = "okay"; - mode = "otg"; - }; - /* Mini PCIe */ usb2-1 { status = "okay"; @@ -2058,8 +2052,14 @@ clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; }; thermal-zones { diff --git a/sys/gnu/dts/arm/tegra124-nyan.dtsi b/sys/gnu/dts/arm/tegra124-nyan.dtsi index 3b10f475037f..9b1af50cd4b8 100644 --- a/sys/gnu/dts/arm/tegra124-nyan.dtsi +++ b/sys/gnu/dts/arm/tegra124-nyan.dtsi @@ -788,9 +788,15 @@ clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; diff --git a/sys/gnu/dts/arm/tegra124-venice2.dts b/sys/gnu/dts/arm/tegra124-venice2.dts index 7309393bfced..8c2ee6e7d6f1 100644 --- a/sys/gnu/dts/arm/tegra124-venice2.dts +++ b/sys/gnu/dts/arm/tegra124-venice2.dts @@ -1266,8 +1266,14 @@ clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; }; }; diff --git a/sys/gnu/dts/arm/tegra124.dtsi b/sys/gnu/dts/arm/tegra124.dtsi index 7f330b1f150f..94cac13d3e50 100644 --- a/sys/gnu/dts/arm/tegra124.dtsi +++ b/sys/gnu/dts/arm/tegra124.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/tegra124-car.h> #include <dt-bindings/thermal/tegra124-soctherm.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra124"; @@ -595,11 +596,12 @@ clocks = <&tegra_car TEGRA124_CLK_RTC>; }; - pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra124-pmc"; reg = <0x0 0x7000e400 0x0 0x400>; clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; }; fuse@7000f800 { diff --git a/sys/gnu/dts/arm/tegra20.dtsi b/sys/gnu/dts/arm/tegra20.dtsi index 9c58e7fcf5c0..c3b8ad53b967 100644 --- a/sys/gnu/dts/arm/tegra20.dtsi +++ b/sys/gnu/dts/arm/tegra20.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/memory/tegra20-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra20"; @@ -608,11 +609,12 @@ status = "disabled"; }; - pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; }; mc: memory-controller@7000f000 { diff --git a/sys/gnu/dts/arm/tegra30-apalis-v1.1.dtsi b/sys/gnu/dts/arm/tegra30-apalis-v1.1.dtsi index 8b7a827d604d..387b17458e22 100644 --- a/sys/gnu/dts/arm/tegra30-apalis-v1.1.dtsi +++ b/sys/gnu/dts/arm/tegra30-apalis-v1.1.dtsi @@ -1189,7 +1189,13 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; }; diff --git a/sys/gnu/dts/arm/tegra30-apalis.dtsi b/sys/gnu/dts/arm/tegra30-apalis.dtsi index c18f6f61d764..6648506f3aa4 100644 --- a/sys/gnu/dts/arm/tegra30-apalis.dtsi +++ b/sys/gnu/dts/arm/tegra30-apalis.dtsi @@ -1171,7 +1171,13 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; }; diff --git a/sys/gnu/dts/arm/tegra30-beaver.dts b/sys/gnu/dts/arm/tegra30-beaver.dts index a3b0f3555cd2..45ef6002b225 100644 --- a/sys/gnu/dts/arm/tegra30-beaver.dts +++ b/sys/gnu/dts/arm/tegra30-beaver.dts @@ -2111,7 +2111,13 @@ clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; }; diff --git a/sys/gnu/dts/arm/tegra30-cardhu.dtsi b/sys/gnu/dts/arm/tegra30-cardhu.dtsi index 7ce61edd52f5..4b4f49a49394 100644 --- a/sys/gnu/dts/arm/tegra30-cardhu.dtsi +++ b/sys/gnu/dts/arm/tegra30-cardhu.dtsi @@ -619,8 +619,14 @@ clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; gpio-keys { diff --git a/sys/gnu/dts/arm/tegra30-colibri.dtsi b/sys/gnu/dts/arm/tegra30-colibri.dtsi index 1f9198bb24ff..adba554381c7 100644 --- a/sys/gnu/dts/arm/tegra30-colibri.dtsi +++ b/sys/gnu/dts/arm/tegra30-colibri.dtsi @@ -1030,8 +1030,14 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; }; diff --git a/sys/gnu/dts/arm/tegra30.dtsi b/sys/gnu/dts/arm/tegra30.dtsi index 55ae050042ce..d2d05f1da274 100644 --- a/sys/gnu/dts/arm/tegra30.dtsi +++ b/sys/gnu/dts/arm/tegra30.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/memory/tegra30-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra30"; @@ -714,11 +715,12 @@ status = "disabled"; }; - pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; }; mc: memory-controller@7000f000 { diff --git a/sys/gnu/dts/arm/uniphier-ld4.dtsi b/sys/gnu/dts/arm/uniphier-ld4.dtsi index 64ec46c72a4c..06e7400d2940 100644 --- a/sys/gnu/dts/arm/uniphier-ld4.dtsi +++ b/sys/gnu/dts/arm/uniphier-ld4.dtsi @@ -51,7 +51,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; @@ -245,7 +245,7 @@ #dma-cells = <1>; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; @@ -265,7 +265,7 @@ sd-uhs-sdr50; }; - emmc: sdhc@5a500000 { + emmc: mmc@5a500000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; @@ -375,7 +375,7 @@ interrupt-controller; }; - aidet: aidet@61830000 { + aidet: interrupt-controller@61830000 { compatible = "socionext,uniphier-ld4-aidet"; reg = <0x61830000 0x200>; interrupt-controller; @@ -398,7 +398,7 @@ }; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5a"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/sys/gnu/dts/arm/uniphier-pro4.dtsi b/sys/gnu/dts/arm/uniphier-pro4.dtsi index 2ec04d7972ef..1c866f0306fc 100644 --- a/sys/gnu/dts/arm/uniphier-pro4.dtsi +++ b/sys/gnu/dts/arm/uniphier-pro4.dtsi @@ -59,7 +59,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; @@ -279,7 +279,7 @@ #dma-cells = <1>; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; @@ -299,7 +299,7 @@ sd-uhs-sdr50; }; - emmc: sdhc@5a500000 { + emmc: mmc@5a500000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; @@ -317,7 +317,7 @@ non-removable; }; - sd1: sdhc@5a600000 { + sd1: mmc@5a600000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a600000 0x200>; @@ -426,7 +426,7 @@ }; }; - aidet: aidet@5fc20000 { + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pro4-aidet"; reg = <0x5fc20000 0x200>; interrupt-controller; @@ -588,7 +588,7 @@ }; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5a"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/sys/gnu/dts/arm/uniphier-pro5.dtsi b/sys/gnu/dts/arm/uniphier-pro5.dtsi index ea3961f920a0..8f1ae0957f5f 100644 --- a/sys/gnu/dts/arm/uniphier-pro5.dtsi +++ b/sys/gnu/dts/arm/uniphier-pro5.dtsi @@ -131,7 +131,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; @@ -144,7 +144,7 @@ next-level-cache = <&l3>; }; - l3: l3-cache@500c8000 { + l3: cache-controller@500c8000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>; @@ -174,8 +174,8 @@ interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 11>; /* common with spi0 */ + resets = <&peri_rst 12>; }; serial0: serial@54006800 { @@ -408,7 +408,7 @@ }; }; - aidet: aidet@5fc20000 { + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pro5-aidet"; reg = <0x5fc20000 0x200>; interrupt-controller; @@ -453,7 +453,155 @@ }; }; - nand: nand@68000000 { + usb0: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host"; + interrupts = <0 134 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb0_rst 15>; + phys = <&usb0_hsphy0>, <&usb0_ssphy0>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-pro5-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb0_rst: reset@0 { + compatible = "socionext,uniphier-pro5-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + }; + + usb0_vbus0: regulator@100 { + compatible = "socionext,uniphier-pro5-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + }; + + usb0_hsphy0: hs-phy@280 { + compatible = "socionext,uniphier-pro5-usb3-hsphy"; + reg = <0x280 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + vbus-supply = <&usb0_vbus0>; + }; + + usb0_ssphy0: ss-phy@380 { + compatible = "socionext,uniphier-pro5-usb3-ssphy"; + reg = <0x380 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + vbus-supply = <&usb0_vbus0>; + }; + }; + + usb1: usb@65c00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65c00000 0xcd00>; + interrupt-names = "host"; + interrupts = <0 137 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb1_rst 15>; + phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>; + dr_mode = "host"; + }; + + usb-glue@65d00000 { + compatible = "socionext,uniphier-pro5-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65d00000 0x400>; + + usb1_rst: reset@0 { + compatible = "socionext,uniphier-pro5-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + + usb1_vbus0: regulator@100 { + compatible = "socionext,uniphier-pro5-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + + usb1_vbus1: regulator@110 { + compatible = "socionext,uniphier-pro5-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + + usb1_hsphy0: hs-phy@280 { + compatible = "socionext,uniphier-pro5-usb3-hsphy"; + reg = <0x280 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + vbus-supply = <&usb1_vbus0>; + }; + + usb1_hsphy1: hs-phy@290 { + compatible = "socionext,uniphier-pro5-usb3-hsphy"; + reg = <0x290 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + vbus-supply = <&usb1_vbus1>; + }; + + usb1_ssphy0: ss-phy@380 { + compatible = "socionext,uniphier-pro5-usb3-ssphy"; + reg = <0x380 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + vbus-supply = <&usb1_vbus0>; + }; + }; + + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; reg-names = "nand_data", "denali_reg"; @@ -469,7 +617,7 @@ resets = <&sys_rst 2>, <&sys_rst 2>; }; - emmc: sdhc@68400000 { + emmc: mmc@68400000 { compatible = "socionext,uniphier-sd-v3.1"; status = "disabled"; reg = <0x68400000 0x800>; @@ -485,7 +633,7 @@ non-removable; }; - sd: sdhc@68800000 { + sd: mmc@68800000 { compatible = "socionext,uniphier-sd-v3.1"; status = "disabled"; reg = <0x68800000 0x800>; diff --git a/sys/gnu/dts/arm/uniphier-pxs2.dtsi b/sys/gnu/dts/arm/uniphier-pxs2.dtsi index 13b0d4a7741f..2f2a24994c69 100644 --- a/sys/gnu/dts/arm/uniphier-pxs2.dtsi +++ b/sys/gnu/dts/arm/uniphier-pxs2.dtsi @@ -157,7 +157,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; @@ -187,8 +187,8 @@ interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 12>; + resets = <&peri_rst 12>; }; serial0: serial@54006800 { @@ -446,7 +446,7 @@ }; }; - emmc: sdhc@5a000000 { + emmc: mmc@5a000000 { compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a000000 0x800>; @@ -462,7 +462,7 @@ non-removable; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a400000 0x800>; @@ -508,7 +508,7 @@ }; }; - aidet: aidet@5fc20000 { + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pxs2-aidet"; reg = <0x5fc20000 0x200>; interrupt-controller; @@ -761,7 +761,7 @@ }; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/sys/gnu/dts/arm/uniphier-ref-daughter.dtsi b/sys/gnu/dts/arm/uniphier-ref-daughter.dtsi index 04e60c295319..a11897669c26 100644 --- a/sys/gnu/dts/arm/uniphier-ref-daughter.dtsi +++ b/sys/gnu/dts/arm/uniphier-ref-daughter.dtsi @@ -7,7 +7,7 @@ &i2c0 { eeprom@50 { - compatible = "microchip,24lc128"; + compatible = "microchip,24lc128", "atmel,24c128"; reg = <0x50>; pagesize = <64>; }; diff --git a/sys/gnu/dts/arm/uniphier-sld8.dtsi b/sys/gnu/dts/arm/uniphier-sld8.dtsi index 4fc6676f5486..09992163e1f4 100644 --- a/sys/gnu/dts/arm/uniphier-sld8.dtsi +++ b/sys/gnu/dts/arm/uniphier-sld8.dtsi @@ -51,7 +51,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; @@ -249,7 +249,7 @@ #dma-cells = <1>; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; @@ -269,7 +269,7 @@ sd-uhs-sdr50; }; - emmc: sdhc@5a500000 { + emmc: mmc@5a500000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; @@ -379,7 +379,7 @@ interrupt-controller; }; - aidet: aidet@61830000 { + aidet: interrupt-controller@61830000 { compatible = "socionext,uniphier-sld8-aidet"; reg = <0x61830000 0x200>; interrupt-controller; @@ -402,7 +402,7 @@ }; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5a"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/sys/gnu/dts/arm/versatile-ab-ib2.dts b/sys/gnu/dts/arm/versatile-ab-ib2.dts index 5890cb974f78..c577ff4bb4be 100644 --- a/sys/gnu/dts/arm/versatile-ab-ib2.dts +++ b/sys/gnu/dts/arm/versatile-ab-ib2.dts @@ -10,7 +10,7 @@ model = "ARM Versatile AB + IB2 board"; /* Special IB2 control register */ - ib2_syscon@27000000 { + syscon@27000000 { compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd"; reg = <0x27000000 0x4>; diff --git a/sys/gnu/dts/arm/vexpress-v2m-rs1.dtsi b/sys/gnu/dts/arm/vexpress-v2m-rs1.dtsi index dfae90adbb7c..5c183483ec3b 100644 --- a/sys/gnu/dts/arm/vexpress-v2m-rs1.dtsi +++ b/sys/gnu/dts/arm/vexpress-v2m-rs1.dtsi @@ -19,7 +19,7 @@ */ / { - smb@8000000 { + bus@8000000 { motherboard { model = "V2M-P1"; arm,hbi = <0x190>; diff --git a/sys/gnu/dts/arm/vexpress-v2m.dtsi b/sys/gnu/dts/arm/vexpress-v2m.dtsi index 2e29d7790497..5e48b641068a 100644 --- a/sys/gnu/dts/arm/vexpress-v2m.dtsi +++ b/sys/gnu/dts/arm/vexpress-v2m.dtsi @@ -19,7 +19,7 @@ */ / { - smb@4000000 { + bus@4000000 { motherboard { model = "V2M-P1"; arm,hbi = <0x190>; diff --git a/sys/gnu/dts/arm/vexpress-v2p-ca15-tc1.dts b/sys/gnu/dts/arm/vexpress-v2p-ca15-tc1.dts index 0dc4277d5f8b..f82fa34c90be 100644 --- a/sys/gnu/dts/arm/vexpress-v2p-ca15-tc1.dts +++ b/sys/gnu/dts/arm/vexpress-v2p-ca15-tc1.dts @@ -236,7 +236,7 @@ }; }; - smb@8000000 { + bus@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/sys/gnu/dts/arm/vexpress-v2p-ca15_a7.dts b/sys/gnu/dts/arm/vexpress-v2p-ca15_a7.dts index 1de0a658adf1..3ac95a179452 100644 --- a/sys/gnu/dts/arm/vexpress-v2p-ca15_a7.dts +++ b/sys/gnu/dts/arm/vexpress-v2p-ca15_a7.dts @@ -608,7 +608,7 @@ }; }; - smb: smb@8000000 { + smb: bus@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/sys/gnu/dts/arm/vexpress-v2p-ca5s.dts b/sys/gnu/dts/arm/vexpress-v2p-ca5s.dts index d5b47d526f9e..7aa64ae25779 100644 --- a/sys/gnu/dts/arm/vexpress-v2p-ca5s.dts +++ b/sys/gnu/dts/arm/vexpress-v2p-ca5s.dts @@ -206,7 +206,7 @@ }; }; - smb: smb@8000000 { + smb: bus@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/sys/gnu/dts/arm/vexpress-v2p-ca9.dts b/sys/gnu/dts/arm/vexpress-v2p-ca9.dts index d796efaadbe3..623246f37448 100644 --- a/sys/gnu/dts/arm/vexpress-v2p-ca9.dts +++ b/sys/gnu/dts/arm/vexpress-v2p-ca9.dts @@ -295,7 +295,7 @@ }; }; - smb: smb@4000000 { + smb: bus@4000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/sys/gnu/dts/arm/vf-colibri-eval-v3.dtsi b/sys/gnu/dts/arm/vf-colibri-eval-v3.dtsi index e2da122a63f4..c12a1b8bc086 100644 --- a/sys/gnu/dts/arm/vf-colibri-eval-v3.dtsi +++ b/sys/gnu/dts/arm/vf-colibri-eval-v3.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ / { diff --git a/sys/gnu/dts/arm/vf-colibri.dtsi b/sys/gnu/dts/arm/vf-colibri.dtsi index fba37b8756f7..cc1e069c44e6 100644 --- a/sys/gnu/dts/arm/vf-colibri.dtsi +++ b/sys/gnu/dts/arm/vf-colibri.dtsi @@ -1,42 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG + * Copyright 2014-2020 Toradex * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/sys/gnu/dts/arm/vf500-colibri-eval-v3.dts b/sys/gnu/dts/arm/vf500-colibri-eval-v3.dts index 076998968fb5..088964f8dc4b 100644 --- a/sys/gnu/dts/arm/vf500-colibri-eval-v3.dts +++ b/sys/gnu/dts/arm/vf500-colibri-eval-v3.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ /dts-v1/; diff --git a/sys/gnu/dts/arm/vf500-colibri.dtsi b/sys/gnu/dts/arm/vf500-colibri.dtsi index 92255f8893ce..8af7ed56e653 100644 --- a/sys/gnu/dts/arm/vf500-colibri.dtsi +++ b/sys/gnu/dts/arm/vf500-colibri.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ #include "vf500.dtsi" diff --git a/sys/gnu/dts/arm/vf500.dtsi b/sys/gnu/dts/arm/vf500.dtsi index b0ec475017ad..0c0dd442300a 100644 --- a/sys/gnu/dts/arm/vf500.dtsi +++ b/sys/gnu/dts/arm/vf500.dtsi @@ -23,7 +23,7 @@ }; soc { - aips-bus@40000000 { + bus@40000000 { intc: interrupt-controller@40003000 { compatible = "arm,cortex-a9-gic"; @@ -43,7 +43,7 @@ }; }; - aips-bus@40080000 { + bus@40080000 { pmu@40089000 { compatible = "arm,cortex-a5-pmu"; interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; diff --git a/sys/gnu/dts/arm/vf610-colibri-eval-v3.dts b/sys/gnu/dts/arm/vf610-colibri-eval-v3.dts index ef9b4d6209f6..fb661e8a2dc6 100644 --- a/sys/gnu/dts/arm/vf610-colibri-eval-v3.dts +++ b/sys/gnu/dts/arm/vf610-colibri-eval-v3.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ /dts-v1/; diff --git a/sys/gnu/dts/arm/vf610-colibri.dtsi b/sys/gnu/dts/arm/vf610-colibri.dtsi index 05c9a39509b8..607cec2df861 100644 --- a/sys/gnu/dts/arm/vf610-colibri.dtsi +++ b/sys/gnu/dts/arm/vf610-colibri.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ #include "vf610.dtsi" diff --git a/sys/gnu/dts/arm/vf610-zii-cfu1.dts b/sys/gnu/dts/arm/vf610-zii-cfu1.dts index 28732249cfc0..ce1920c052fc 100644 --- a/sys/gnu/dts/arm/vf610-zii-cfu1.dts +++ b/sys/gnu/dts/arm/vf610-zii-cfu1.dts @@ -71,6 +71,14 @@ los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* 28VDC_IN */ + <&adc0 9>, /* +3.3V */ + <&adc1 8>, /* VCC_1V5 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/sys/gnu/dts/arm/vf610-zii-dev.dtsi b/sys/gnu/dts/arm/vf610-zii-dev.dtsi index a1b4ccee2a10..95d0060fb56c 100644 --- a/sys/gnu/dts/arm/vf610-zii-dev.dtsi +++ b/sys/gnu/dts/arm/vf610-zii-dev.dtsi @@ -84,6 +84,14 @@ regulator-boot-on; gpio = <&gpio0 6 0>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* VCC_1V5 */ + <&adc0 9>, /* VCC_1V8 */ + <&adc1 8>, /* VCC_1V0 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/sys/gnu/dts/arm/vf610-zii-spb4.dts b/sys/gnu/dts/arm/vf610-zii-spb4.dts index 77e1484211e4..55b4201e27f6 100644 --- a/sys/gnu/dts/arm/vf610-zii-spb4.dts +++ b/sys/gnu/dts/arm/vf610-zii-spb4.dts @@ -42,6 +42,14 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* 28V_SW */ + <&adc0 9>, /* +3.3V */ + <&adc1 8>, /* VCC_1V5 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/sys/gnu/dts/arm/vf610-zii-ssmb-dtu.dts b/sys/gnu/dts/arm/vf610-zii-ssmb-dtu.dts index 847c5858fea1..a6c22a79779e 100644 --- a/sys/gnu/dts/arm/vf610-zii-ssmb-dtu.dts +++ b/sys/gnu/dts/arm/vf610-zii-ssmb-dtu.dts @@ -46,6 +46,14 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* 12V_MAIN */ + <&adc0 9>, /* +3.3V */ + <&adc1 8>, /* VCC_1V5 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/sys/gnu/dts/arm/vf610-zii-ssmb-spu3.dts b/sys/gnu/dts/arm/vf610-zii-ssmb-spu3.dts index 453fce80f858..3d05c894bdc0 100644 --- a/sys/gnu/dts/arm/vf610-zii-ssmb-spu3.dts +++ b/sys/gnu/dts/arm/vf610-zii-ssmb-spu3.dts @@ -46,6 +46,14 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* 12V_MAIN */ + <&adc0 9>, /* +3.3V */ + <&adc1 8>, /* VCC_1V5 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/sys/gnu/dts/arm/vf610m4-colibri.dts b/sys/gnu/dts/arm/vf610m4-colibri.dts index d4bc0e3f2f11..2c2db47af441 100644 --- a/sys/gnu/dts/arm/vf610m4-colibri.dts +++ b/sys/gnu/dts/arm/vf610m4-colibri.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* * Device tree for Colibri VF61 Cortex-M4 support * * Copyright (C) 2015 Stefan Agner - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/sys/gnu/dts/arm/vfxxx.dtsi b/sys/gnu/dts/arm/vfxxx.dtsi index 028e0ec30e0c..2d547e7b21ad 100644 --- a/sys/gnu/dts/arm/vfxxx.dtsi +++ b/sys/gnu/dts/arm/vfxxx.dtsi @@ -59,7 +59,7 @@ interrupt-parent = <&mscm_ir>; ranges; - aips0: aips-bus@40000000 { + aips0: bus@40000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -471,7 +471,7 @@ }; }; - aips1: aips-bus@40080000 { + aips1: bus@40080000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-a64-olinuxino.dts b/sys/gnu/dts/arm64/allwinner/sun50i-a64-olinuxino.dts index 6dfafa1c879b..5fa9ca0191a8 100644 --- a/sys/gnu/dts/arm64/allwinner/sun50i-a64-olinuxino.dts +++ b/sys/gnu/dts/arm64/allwinner/sun50i-a64-olinuxino.dts @@ -158,6 +158,17 @@ */ }; +&pio { + vcc-pa-supply = <®_dcdc1>; + vcc-pb-supply = <®_dcdc1>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_aldo1>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo4>; + vcc-ph-supply = <®_dcdc1>; +}; + &r_rsb { status = "okay"; @@ -170,6 +181,12 @@ }; }; +/* VCC-PL is powered by aldo2 but we cannot add it as the RSB */ +/* interface used to talk to the PMIC in on the PL pins */ +/* &r_pio { */ +/* vcc-pl-supply = <®_aldo2>; */ +/* }; */ + #include "axp803.dtsi" &ac_power_supply { diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinebook.dts b/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinebook.dts index 3d894b208901..64b1c54f87c0 100644 --- a/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinebook.dts +++ b/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinebook.dts @@ -21,32 +21,17 @@ ethernet0 = &rtl8723cs; }; - vdd_bl: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "bl-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - enable-active-high; - }; - backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 50000 0>; brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>; default-brightness-level = <2>; enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ - power-supply = <&vdd_bl>; + power-supply = <®_vbklt>; }; chosen { stdout-path = "serial0:115200n8"; - - framebuffer-lcd { - panel-supply = <®_dc1sw>; - dvdd25-supply = <®_dldo2>; - dvdd12-supply = <®_fldo1>; - }; }; gpio_keys { @@ -63,11 +48,34 @@ }; }; - reg_vcc3v3: vcc3v3 { + panel_edp: panel-edp { + compatible = "neweast,wjfh116008a"; + backlight = <&backlight>; + power-supply = <®_dc1sw>; + + port { + panel_edp_in: endpoint { + remote-endpoint = <&anx6345_out_edp>; + }; + }; + }; + + reg_vbklt: vbklt { + compatible = "regulator-fixed"; + regulator-name = "vbklt"; + regulator-min-microvolt = <18000000>; + regulator-max-microvolt = <18000000>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + enable-active-high; + }; + + reg_vcc5v0: vcc5v0 { compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; + enable-active-high; }; wifi_pwrseq: wifi_pwrseq { @@ -77,12 +85,7 @@ speaker_amp: audio-amplifier { compatible = "simple-audio-amplifier"; - /* - * TODO This is actually a fixed regulator controlled by - * the GPIO line on the PMIC. This should be corrected - * once GPIO support is added for this PMIC. - */ - VCC-supply = <®_ldo_io0>; + VCC-supply = <®_vcc5v0>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ sound-name-prefix = "Speaker Amp"; }; @@ -118,6 +121,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { phys = <&usbphy 0>; phy-names = "usb"; @@ -128,11 +135,15 @@ status = "okay"; }; +&mixer0 { + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ disable-wp; bus-width = <4>; status = "okay"; @@ -175,10 +186,61 @@ status = "okay"; }; +&pio { + vcc-pc-supply = <®_eldo1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_aldo1>; + vcc-pg-supply = <®_eldo1>; +}; + &pwm { status = "okay"; }; +&r_i2c { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pl89_pins>; + status = "okay"; + + anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_fldo1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + anx6345_in: port@0 { + reg = <0>; + anx6345_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + + anx6345_out: port@1 { + reg = <1>; + anx6345_out_edp: endpoint { + remote-endpoint = <&panel_edp_in>; + }; + }; + }; + }; +}; + +&r_pio { + /* + * FIXME: We can't add that supply for now since it would + * create a circular dependency between pinctrl, the regulator + * and the RSB Bus. + * + * vcc-pl-supply = <®_aldo2>; + */ +}; + &r_rsb { status = "okay"; @@ -190,14 +252,6 @@ }; }; -/* The ANX6345 eDP-bridge is on r_i2c */ -&r_i2c { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&r_i2c_pl89_pins>; - status = "okay"; -}; - #include "axp803.dtsi" &ac_power_supply { @@ -209,9 +263,7 @@ }; ®_aldo1 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-name = "vcc-csi"; + regulator-name = "vcc-pe"; }; ®_aldo2 { @@ -274,12 +326,6 @@ regulator-name = "vcc-edp"; }; -®_dldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "avdd-csi"; -}; - ®_dldo4 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -293,12 +339,6 @@ regulator-name = "cpvdd"; }; -®_eldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vdd-1v8-csi"; -}; - ®_fldo1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -312,17 +352,16 @@ regulator-name = "vdd-cpus"; }; -®_ldo_io0 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-usb"; - status = "okay"; -}; - ®_rtc_ldo { regulator-name = "vcc-rtc"; }; +&simplefb_lcd { + panel-supply = <®_dc1sw>; + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_fldo1>; +}; + &simplefb_hdmi { vcc-hdmi-supply = <®_dldo1>; }; @@ -350,6 +389,19 @@ "MIC2", "Internal Microphone Right"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + + status = "okay"; +}; + +&tcon0_out { + tcon0_out_anx6345: endpoint { + remote-endpoint = <&anx6345_in_tcon0>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; @@ -361,7 +413,7 @@ }; &usbphy { - usb0_vbus-supply = <®_ldo_io0>; - usb1_vbus-supply = <®_ldo_io0>; + usb0_vbus-supply = <®_vcc5v0>; + usb1_vbus-supply = <®_vcc5v0>; status = "okay"; }; diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinephone-1.0.dts b/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinephone-1.0.dts new file mode 100644 index 000000000000..0c42272106af --- /dev/null +++ b/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinephone-1.0.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Ondrej Jirman <megous@megous.com> + +/dts-v1/; + +#include "sun50i-a64-pinephone.dtsi" + +/ { + model = "Pine64 PinePhone Developer Batch (1.0)"; + compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64"; +}; diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinephone-1.1.dts b/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinephone-1.1.dts new file mode 100644 index 000000000000..06a775c41664 --- /dev/null +++ b/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinephone-1.1.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Ondrej Jirman <megous@megous.com> + +/dts-v1/; + +#include "sun50i-a64-pinephone.dtsi" + +/ { + model = "Pine64 PinePhone Braveheart (1.1)"; + compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64"; +}; diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinephone.dtsi b/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinephone.dtsi new file mode 100644 index 000000000000..cefda145c3c9 --- /dev/null +++ b/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinephone.dtsi @@ -0,0 +1,379 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz> +// Copyright (C) 2020 Martijn Braam <martijn@brixit.nl> +// Copyright (C) 2020 Ondrej Jirman <megous@megous.com> + +#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + blue { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */ + }; + + green { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */ + }; + + red { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */ + }; + }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */ + sound-name-prefix = "Speaker Amp"; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ + vcc-supply = <®_dcdc1>; + }; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + +&dai { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + /* Magnetometer */ + lis3mdl@1e { + compatible = "st,lis3mdl-magn"; + reg = <0x1e>; + vdd-supply = <®_dldo1>; + vddio-supply = <®_dldo1>; + }; + + /* Accelerometer/gyroscope */ + mpu6050@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&pio>; + interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */ + vdd-supply = <®_dldo1>; + vddio-supply = <®_dldo1>; + }; +}; + +/* Connected to pogo pins (external spring based pinheader for user addons) */ +&i2c2 { + status = "okay"; +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button-200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button-400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <®_dcdc1>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_aldo1>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo4>; + vcc-ph-supply = <®_dcdc1>; +}; + +&r_pio { + /* + * FIXME: We can't add that supply for now since it would + * create a circular dependency between pinctrl, the regulator + * and the RSB Bus. + * + * vcc-pl-supply = <®_aldo2>; + */ +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp803.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +®_aldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dovdd-csi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-dsi-sensor"; +}; + +®_dldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-mipi-io"; +}; + +®_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_eldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-lpddr"; +}; + +®_eldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-1v8-csi"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_ldo_io0 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-lcd-ctp-stk"; + status = "okay"; +}; + +®_ldo_io1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8-typec"; + status = "okay"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&sound { + status = "okay"; + simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; + simple-audio-card,widgets = "Microphone", "Headset Microphone", + "Microphone", "Internal Microphone", + "Headphone", "Headphone Jack", + "Speaker", "Internal Earpiece", + "Speaker", "Internal Speaker"; + simple-audio-card,routing = + "Headphone Jack", "HP", + "Internal Earpiece", "EARPIECE", + "Internal Speaker", "Speaker Amp OUTL", + "Internal Speaker", "Speaker Amp OUTR", + "Speaker Amp INL", "LINEOUT", + "Speaker Amp INR", "LINEOUT", + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Internal Microphone", "MBIAS", + "MIC1", "Internal Microphone", + "Headset Microphone", "HBIAS", + "MIC2", "Headset Microphone"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +/* Connected to the modem (hardware flow control can't be used) */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinetab.dts b/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinetab.dts new file mode 100644 index 000000000000..dc4ab6b434f9 --- /dev/null +++ b/sys/gnu/dts/arm64/allwinner/sun50i-a64-pinetab.dts @@ -0,0 +1,460 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz> + * + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "PineTab"; + compatible = "pine64,pinetab", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + ethernet0 = &rtl8723cs; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>; + default-brightness-level = <15>; + enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ + power-supply = <&vdd_bl>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + i2c-csi { + compatible = "i2c-gpio"; + sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */ + scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */ + i2c-gpio,delay-us = <5>; + #address-cells = <1>; + #size-cells = <0>; + + /* Rear camera */ + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_mclk_pin>; + clocks = <&ccu CLK_CSI_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <®_dldo3>; + DOVDD-supply = <®_aldo1>; + DVDD-supply = <®_eldo3>; + reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */ + powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */ + + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; + }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + sound-name-prefix = "Speaker Amp"; + }; + + vdd_bl: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "bl-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + enable-active-high; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + post-power-on-delay-ms = <200>; + }; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + +&csi { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + csi_ep: endpoint { + remote-endpoint = <&ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; + +&dai { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&dphy { + status = "okay"; +}; + +&dsi { + vcc-dsi-supply = <®_dldo1>; + status = "okay"; + + panel@0 { + compatible = "feixin,k101-im2ba02"; + reg = <0>; + avdd-supply = <®_dc1sw>; + dvdd-supply = <®_dc1sw>; + cvdd-supply = <®_ldo_io1>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + backlight = <&backlight>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt9271"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */ + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + AVDD28-supply = <®_ldo_io1>; + }; +}; + +&i2c0_pins { + bias-pull-up; +}; + +&i2c1 { + status = "okay"; + + /* TODO: add Bochs BMA223 accelerometer here */ +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button-200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button-400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mixer1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_dcdc1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dldo4>; + vqmmc-supply = <®_eldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723cs: wifi@1 { + reg = <1>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pwm { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp803.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +®_aldo1 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "dovdd-csi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi-dsi-sensor"; +}; + +®_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_eldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca-1v8"; +}; + +®_eldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-1v8-csi"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_ldo_io0 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb"; + status = "okay"; +}; + +®_ldo_io1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <3500000>; + regulator-name = "vcc-touchscreen"; + status = "okay"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&sound { + status = "okay"; + simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; + simple-audio-card,widgets = "Microphone", "Internal Microphone Left", + "Microphone", "Internal Microphone Right", + "Headphone", "Headphone Jack", + "Speaker", "Internal Speaker"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "Speaker Amp INL", "LINEOUT", + "Speaker Amp INR", "LINEOUT", + "Internal Speaker", "Speaker Amp OUTL", + "Internal Speaker", "Speaker Amp OUTR", + "Headphone Jack", "HP", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Internal Microphone Left", "MBIAS", + "MIC1", "Internal Microphone Left", + "Internal Microphone Right", "HBIAS", + "MIC2", "Internal Microphone Right"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_ldo_io0>; + status = "okay"; +}; diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-a64.dtsi b/sys/gnu/dts/arm64/allwinner/sun50i-a64.dtsi index 862b47dc9dc9..c26cc1fcaffd 100644 --- a/sys/gnu/dts/arm64/allwinner/sun50i-a64.dtsi +++ b/sys/gnu/dts/arm64/allwinner/sun50i-a64.dtsi @@ -154,24 +154,6 @@ }; }; - sound_spdif { - compatible = "simple-audio-card"; - simple-audio-card,name = "On-board SPDIF"; - - simple-audio-card,cpu { - sound-dai = <&spdif>; - }; - - simple-audio-card,codec { - sound-dai = <&spdif_out>; - }; - }; - - spdif_out: spdif-out { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - }; - timer { compatible = "arm,armv8-timer"; allwinner,erratum-unknown1; @@ -264,7 +246,7 @@ display_clocks: clock@0 { compatible = "allwinner,sun50i-a64-de2-clk"; - reg = <0x0 0x100000>; + reg = <0x0 0x10000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; clock-names = "bus", @@ -274,6 +256,18 @@ #reset-cells = <1>; }; + rotate: rotate@20000 { + compatible = "allwinner,sun50i-a64-de2-rotate", + "allwinner,sun8i-a83t-de2-rotate"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&display_clocks CLK_BUS_ROT>, + <&display_clocks CLK_ROT>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_ROT>; + }; + mixer0: mixer@100000 { compatible = "allwinner,sun50i-a64-de2-mixer-0"; reg = <0x100000 0x100000>; @@ -671,6 +665,11 @@ function = "i2c1"; }; + i2c2_pins: i2c2-pins { + pins = "PE14", "PE15"; + function = "i2c2"; + }; + /omit-if-no-ref/ lcd_rgb666_pins: lcd-rgb666-pins { pins = "PD0", "PD1", "PD2", "PD3", "PD4", @@ -958,12 +957,13 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; @@ -1061,6 +1061,14 @@ status = "disabled"; }; + mbus: dram-controller@1c62000 { + compatible = "allwinner,sun50i-a64-mbus"; + reg = <0x01c62000 0x1000>; + clocks = <&ccu 112>; + dma-ranges = <0x00000000 0x40000000 0xc0000000>; + #interconnect-cells = <1>; + }; + csi: csi@1cb0000 { compatible = "allwinner,sun50i-a64-csi"; reg = <0x01cb0000 0x1000>; @@ -1106,6 +1114,20 @@ #phy-cells = <0>; }; + deinterlace: deinterlace@1e00000 { + compatible = "allwinner,sun50i-a64-deinterlace", + "allwinner,sun8i-h3-deinterlace"; + reg = <0x01e00000 0x20000>; + clocks = <&ccu CLK_BUS_DEINTERLACE>, + <&ccu CLK_DEINTERLACE>, + <&ccu CLK_DRAM_DEINTERLACE>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_DEINTERLACE>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mbus 9>; + interconnect-names = "dma-mem"; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"; diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-h5-orangepi-pc2.dts b/sys/gnu/dts/arm64/allwinner/sun50i-h5-orangepi-pc2.dts index 70b5f0998421..7d7aad18f078 100644 --- a/sys/gnu/dts/arm64/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/sys/gnu/dts/arm64/allwinner/sun50i-h5-orangepi-pc2.dts @@ -61,6 +61,7 @@ label = "sw4"; linux,code = <BTN_0>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + wakeup-source; }; }; @@ -93,6 +94,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &de { status = "okay"; }; @@ -168,6 +173,22 @@ status = "okay"; }; +&r_i2c { + status = "okay"; + + reg_vdd_cpux: regulator@65 { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "vdd-cpux"; + silergy,fixed-microvolt = <1100000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <200>; + regulator-boot-on; + regulator-always-on; + }; +}; + &spi0 { status = "okay"; diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-h5.dtsi b/sys/gnu/dts/arm64/allwinner/sun50i-h5.dtsi index 9893aa64dd0b..4462a68c0681 100644 --- a/sys/gnu/dts/arm64/allwinner/sun50i-h5.dtsi +++ b/sys/gnu/dts/arm64/allwinner/sun50i-h5.dtsi @@ -38,8 +38,7 @@ }; pmu { - compatible = "arm,cortex-a53-pmu", - "arm,armv8-pmuv3"; + compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-h6-beelink-gs1.dts b/sys/gnu/dts/arm64/allwinner/sun50i-h6-beelink-gs1.dts index df6d872c34e2..8f09d209359b 100644 --- a/sys/gnu/dts/arm64/allwinner/sun50i-h6-beelink-gs1.dts +++ b/sys/gnu/dts/arm64/allwinner/sun50i-h6-beelink-gs1.dts @@ -32,6 +32,13 @@ }; }; + ext_osc32k: ext_osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + leds { compatible = "gpio-leds"; @@ -275,6 +282,10 @@ vcc-pm-supply = <®_aldo1>; }; +&rtc { + clocks = <&ext_osc32k>; +}; + &spdif { status = "okay"; }; diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-h6-orangepi-3.dts b/sys/gnu/dts/arm64/allwinner/sun50i-h6-orangepi-3.dts index c311eee52a35..47f579610dcc 100644 --- a/sys/gnu/dts/arm64/allwinner/sun50i-h6-orangepi-3.dts +++ b/sys/gnu/dts/arm64/allwinner/sun50i-h6-orangepi-3.dts @@ -32,6 +32,13 @@ }; }; + ext_osc32k: ext_osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + leds { compatible = "gpio-leds"; @@ -144,6 +151,15 @@ }; }; +&mmc2 { + vmmc-supply = <®_cldo1>; + vqmmc-supply = <®_bldo2>; + cap-mmc-hw-reset; + non-removable; + bus-width = <8>; + status = "okay"; +}; + &ohci0 { status = "okay"; }; @@ -276,6 +292,10 @@ status = "okay"; }; +&rtc { + clocks = <&ext_osc32k>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts b/sys/gnu/dts/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts index 83aab7368889..fceb298bfd53 100644 --- a/sys/gnu/dts/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts +++ b/sys/gnu/dts/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts @@ -7,4 +7,37 @@ / { model = "OrangePi One Plus"; compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6"; + + aliases { + ethernet0 = &emac; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + vin-supply = <®_aldo2>; + }; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&ext_rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_gmac_3v3>; + allwinner,rx-delay-ps = <200>; + allwinner,tx-delay-ps = <200>; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; }; diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-h6-orangepi.dtsi b/sys/gnu/dts/arm64/allwinner/sun50i-h6-orangepi.dtsi index 37f4c57597d4..9287976c4a50 100644 --- a/sys/gnu/dts/arm64/allwinner/sun50i-h6-orangepi.dtsi +++ b/sys/gnu/dts/arm64/allwinner/sun50i-h6-orangepi.dtsi @@ -20,6 +20,25 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + ext_osc32k: ext_osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + leds { compatible = "gpio-leds"; @@ -45,6 +64,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -58,6 +81,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; @@ -197,6 +230,10 @@ status = "okay"; }; +&rtc { + clocks = <&ext_osc32k>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-h6-pine-h64.dts b/sys/gnu/dts/arm64/allwinner/sun50i-h6-pine-h64.dts index d1c2aa5b3a20..b0642d841933 100644 --- a/sys/gnu/dts/arm64/allwinner/sun50i-h6-pine-h64.dts +++ b/sys/gnu/dts/arm64/allwinner/sun50i-h6-pine-h64.dts @@ -14,12 +14,20 @@ aliases { ethernet0 = &emac; serial0 = &uart0; + spi0 = &spi0; }; chosen { stdout-path = "serial0:115200n8"; }; + ext_osc32k: ext_osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + hdmi_connector: connector { compatible = "hdmi-connector"; type = "a"; @@ -278,6 +286,28 @@ vcc-pm-supply = <®_aldo1>; }; +&rtc { + clocks = <&ext_osc32k>; +}; + +/* + * The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI + * flash and eMMC at the same time, as one of them would fail probing. + * Disable SPI0 in here, to prefer the more useful eMMC. U-Boot can + * fix this up in no eMMC is connected. + */ +&spi0 { + pinctrl-0 = <&spi0_pins>, <&spi0_cs_pin>; + pinctrl-names = "default"; + status = "disabled"; + + flash@0 { + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <4000000>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/sys/gnu/dts/arm64/allwinner/sun50i-h6.dtsi b/sys/gnu/dts/arm64/allwinner/sun50i-h6.dtsi index 3329283e38ab..b9ab7d8fa8af 100644 --- a/sys/gnu/dts/arm64/allwinner/sun50i-h6.dtsi +++ b/sys/gnu/dts/arm64/allwinner/sun50i-h6.dtsi @@ -62,16 +62,8 @@ clock-output-names = "osc24M"; }; - ext_osc32k: ext_osc32k_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "ext_osc32k"; - }; - pmu { - compatible = "arm,cortex-a53-pmu", - "arm,armv8-pmuv3"; + compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, @@ -338,6 +330,31 @@ bias-pull-up; }; + /omit-if-no-ref/ + spi0_pins: spi0-pins { + pins = "PC0", "PC2", "PC3"; + function = "spi0"; + }; + + /* pin shared with MMC2-CMD (eMMC) */ + /omit-if-no-ref/ + spi0_cs_pin: spi0-cs-pin { + pins = "PC5"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi1_pins: spi1-pins { + pins = "PH4", "PH5", "PH6"; + function = "spi1"; + }; + + /omit-if-no-ref/ + spi1_cs_pin: spi1-cs-pin { + pins = "PH3"; + function = "spi1"; + }; + spdif_tx_pin: spdif-tx-pin { pins = "PH7"; function = "spdif"; @@ -504,6 +521,36 @@ #size-cells = <0>; }; + spi0: spi@5010000 { + compatible = "allwinner,sun50i-h6-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x05010000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + dmas = <&dma 22>, <&dma 22>; + dma-names = "rx", "tx"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@5011000 { + compatible = "allwinner,sun50i-h6-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x05011000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + emac: ethernet@5020000 { compatible = "allwinner,sun50i-h6-emac", "allwinner,sun50i-a64-emac"; @@ -800,7 +847,6 @@ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clock-output-names = "osc32k", "osc32k-out", "iosc"; - clocks = <&ext_osc32k>; #clock-cells = <1>; }; diff --git a/sys/gnu/dts/arm64/altera/socfpga_stratix10_socdk.dts b/sys/gnu/dts/arm64/altera/socfpga_stratix10_socdk.dts index fb11ef05d556..f6c4a15079d3 100644 --- a/sys/gnu/dts/arm64/altera/socfpga_stratix10_socdk.dts +++ b/sys/gnu/dts/arm64/altera/socfpga_stratix10_socdk.dts @@ -178,12 +178,12 @@ qspi_boot: partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x034B0000>; + reg = <0x0 0x03FE0000>; }; - qspi_rootfs: partition@4000000 { + qspi_rootfs: partition@3FE0000 { label = "Root Filesystem - JFFS2"; - reg = <0x034B0000 0x0EB50000>; + reg = <0x03FE0000 0x0C020000>; }; }; }; diff --git a/sys/gnu/dts/arm64/amlogic/meson-a1.dtsi b/sys/gnu/dts/arm64/amlogic/meson-a1.dtsi index 4dec518c4dde..755b4ad15184 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-a1.dtsi +++ b/sys/gnu/dts/arm64/amlogic/meson-a1.dtsi @@ -60,6 +60,12 @@ sm: secure-monitor { compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,meson-a1-pwrc"; + #power-domain-cells = <1>; + status = "okay"; + }; }; soc { diff --git a/sys/gnu/dts/arm64/amlogic/meson-axg-s400.dts b/sys/gnu/dts/arm64/amlogic/meson-axg-s400.dts index 4cd2d5951822..cb1360ae1211 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-axg-s400.dts +++ b/sys/gnu/dts/arm64/amlogic/meson-axg-s400.dts @@ -313,15 +313,15 @@ dai-tdm-slot-rx-mask-1 = <1 1>; mclk-fs = <256>; - codec@0 { + codec-0 { sound-dai = <&lineout>; }; - codec@1 { + codec-1 { sound-dai = <&speaker_amp1>; }; - codec@2 { + codec-2 { sound-dai = <&linein>; }; diff --git a/sys/gnu/dts/arm64/amlogic/meson-g12-common.dtsi b/sys/gnu/dts/arm64/amlogic/meson-g12-common.dtsi index abe04f4ad7d8..c0aef7d69117 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-g12-common.dtsi +++ b/sys/gnu/dts/arm64/amlogic/meson-g12-common.dtsi @@ -295,17 +295,9 @@ }; }; - emmc_pins: emmc { + emmc_ctrl_pins: emmc-ctrl { mux-0 { - groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3", - "emmc_nand_d4", - "emmc_nand_d5", - "emmc_nand_d6", - "emmc_nand_d7", - "emmc_cmd"; + groups = "emmc_cmd"; function = "emmc"; bias-pull-up; drive-strength-microamp = <4000>; @@ -319,6 +311,34 @@ }; }; + emmc_data_4b_pins: emmc-data-4b { + mux-0 { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3"; + function = "emmc"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + + emmc_data_8b_pins: emmc-data-8b { + mux-0 { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7"; + function = "emmc"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + emmc_ds_pins: emmc-ds { mux { groups = "emmc_nand_ds"; @@ -573,6 +593,17 @@ }; }; + nor_pins: nor { + mux { + groups = "nor_d", + "nor_q", + "nor_c", + "nor_cs"; + function = "nor"; + bias-disable; + }; + }; + pdm_din0_a_pins: pdm-din0-a { mux { groups = "pdm_din0_a"; @@ -957,6 +988,57 @@ }; }; + spicc0_x_pins: spicc0-x { + mux { + groups = "spi0_mosi_x", + "spi0_miso_x", + "spi0_clk_x"; + function = "spi0"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + spicc0_ss0_x_pins: spicc0-ss0-x { + mux { + groups = "spi0_ss0_x"; + function = "spi0"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + spicc0_c_pins: spicc0-c { + mux { + groups = "spi0_mosi_c", + "spi0_miso_c", + "spi0_ss0_c", + "spi0_clk_c"; + function = "spi0"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + spicc1_pins: spicc1 { + mux { + groups = "spi1_mosi", + "spi1_miso", + "spi1_clk"; + function = "spi1"; + drive-strength-microamp = <4000>; + }; + }; + + spicc1_ss0_pins: spicc1-ss0 { + mux { + groups = "spi1_ss0"; + function = "spi1"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + tdm_a_din0_pins: tdm-a-din0 { mux { groups = "tdm_a_din0"; @@ -2051,6 +2133,39 @@ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; }; + spicc0: spi@13000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x13000 0x0 0x44>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC0>, + <&clkc CLKID_SPICC0_SCLK>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spicc1: spi@15000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x15000 0x0 0x44>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC1>, + <&clkc CLKID_SPICC1_SCLK>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spifc: spi@14000 { + compatible = "amlogic,meson-gxbb-spifc"; + status = "disabled"; + reg = <0x0 0x14000 0x0 0x80>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_CLK81>; + }; + pwm_ef: pwm@19000 { compatible = "amlogic,meson-g12a-ee-pwm"; reg = <0x0 0x19000 0x0 0x20>; @@ -2204,7 +2319,7 @@ reg = <0x0 0xff400000 0x0 0x40000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "ddr"; + clock-names = "otg"; phys = <&usb2_phy1>; phy-names = "usb2-phy"; dr_mode = "peripheral"; @@ -2220,6 +2335,7 @@ dr_mode = "host"; snps,dis_u2_susphy_quirk; snps,quirk-frame-length-adjustment; + snps,parkmode-disable-ss-quirk; }; }; diff --git a/sys/gnu/dts/arm64/amlogic/meson-g12.dtsi b/sys/gnu/dts/arm64/amlogic/meson-g12.dtsi index 03054c478896..55d39020ec72 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-g12.dtsi +++ b/sys/gnu/dts/arm64/amlogic/meson-g12.dtsi @@ -56,6 +56,7 @@ <&clkc_audio AUD_CLKID_PDM_DCLK>, <&clkc_audio AUD_CLKID_PDM_SYSCLK>; clock-names = "pclk", "dclk", "sysclk"; + resets = <&clkc_audio AUD_RESET_PDM>; status = "disabled"; }; diff --git a/sys/gnu/dts/arm64/amlogic/meson-g12a-sei510.dts b/sys/gnu/dts/arm64/amlogic/meson-g12a-sei510.dts index 2ac9e3a43b96..b00d0468c753 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-g12a-sei510.dts +++ b/sys/gnu/dts/arm64/amlogic/meson-g12a-sei510.dts @@ -269,7 +269,7 @@ dai-tdm-slot-tx-mask-3 = <1 1>; mclk-fs = <256>; - codec@0 { + codec { sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; }; }; @@ -472,7 +472,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/sys/gnu/dts/arm64/amlogic/meson-g12a-u200.dts b/sys/gnu/dts/arm64/amlogic/meson-g12a-u200.dts index 2a324f0136e3..a26bfe72550f 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-g12a-u200.dts +++ b/sys/gnu/dts/arm64/amlogic/meson-g12a-u200.dts @@ -271,7 +271,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/sys/gnu/dts/arm64/amlogic/meson-g12a-x96-max.dts b/sys/gnu/dts/arm64/amlogic/meson-g12a-x96-max.dts index 4f2596d82989..1b07c8c06eac 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-g12a-x96-max.dts +++ b/sys/gnu/dts/arm64/amlogic/meson-g12a-x96-max.dts @@ -443,7 +443,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/sys/gnu/dts/arm64/amlogic/meson-g12b-khadas-vim3.dtsi b/sys/gnu/dts/arm64/amlogic/meson-g12b-khadas-vim3.dtsi index 554863429aa6..c6c8caed8327 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-g12b-khadas-vim3.dtsi +++ b/sys/gnu/dts/arm64/amlogic/meson-g12b-khadas-vim3.dtsi @@ -8,6 +8,8 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { + model = "Khadas VIM3"; + vddcpu_a: regulator-vddcpu-a { /* * MP8756GD Regulator. @@ -48,7 +50,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12A-KHADAS-VIM3"; + model = "G12B-KHADAS-VIM3"; audio-aux-devs = <&tdmout_b>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", @@ -152,6 +154,10 @@ clock-latency = <50000>; }; +&frddr_a { + status = "okay"; +}; + &frddr_b { status = "okay"; }; diff --git a/sys/gnu/dts/arm64/amlogic/meson-g12b-odroid-n2.dts b/sys/gnu/dts/arm64/amlogic/meson-g12b-odroid-n2.dts index 0e54c1dc2842..169ea283d4ee 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-g12b-odroid-n2.dts +++ b/sys/gnu/dts/arm64/amlogic/meson-g12b-odroid-n2.dts @@ -208,7 +208,7 @@ sound { compatible = "amlogic,axg-sound-card"; - model = "G12A-ODROIDN2"; + model = "G12B-ODROID-N2"; audio-aux-devs = <&tdmout_b>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", @@ -435,7 +435,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; @@ -451,6 +451,27 @@ vqmmc-supply = <&flash_1v8>; }; +/* + * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins + * and eMMC Data 4 to 7 pins. + * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0, + * and change bus-width to 4 then spifc can be enabled. + * The SW1 slide should also be set to the correct position. + */ +&spifc { + status = "disabled"; + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + + mx25u64: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25u6435f", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + }; +}; + &tdmif_b { status = "okay"; }; diff --git a/sys/gnu/dts/arm64/amlogic/meson-g12b-ugoos-am6.dts b/sys/gnu/dts/arm64/amlogic/meson-g12b-ugoos-am6.dts index ccd0bced01e8..06c5430eb92d 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-g12b-ugoos-am6.dts +++ b/sys/gnu/dts/arm64/amlogic/meson-g12b-ugoos-am6.dts @@ -485,7 +485,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; @@ -545,7 +545,7 @@ &usb { status = "okay"; dr_mode = "host"; - vbus-regulator = <&usb_pwr_en>; + vbus-supply = <&usb_pwr_en>; }; &usb2_phy0 { diff --git a/sys/gnu/dts/arm64/amlogic/meson-gx.dtsi b/sys/gnu/dts/arm64/amlogic/meson-gx.dtsi index 40db06e28b66..03f79fe045b7 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-gx.dtsi +++ b/sys/gnu/dts/arm64/amlogic/meson-gx.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -83,6 +84,7 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 0>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -92,6 +94,7 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 0>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -101,6 +104,7 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 0>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -110,6 +114,7 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 0>; + #cooling-cells = <2>; }; l2: l2-cache0 { @@ -117,6 +122,53 @@ }; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&scpi_sensors 0>; + + trips { + cpu_passive: cpu-passive { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cpu_cooling_maps: cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + arm-pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, diff --git a/sys/gnu/dts/arm64/amlogic/meson-gxbb-kii-pro.dts b/sys/gnu/dts/arm64/amlogic/meson-gxbb-kii-pro.dts index 2f1f829450a2..6c9cc45fb417 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-gxbb-kii-pro.dts +++ b/sys/gnu/dts/arm64/amlogic/meson-gxbb-kii-pro.dts @@ -76,3 +76,7 @@ }; }; }; + +&ir { + linux,rc-map-name = "rc-videostrong-kii-pro"; +}; diff --git a/sys/gnu/dts/arm64/amlogic/meson-gxbb-odroidc2.dts b/sys/gnu/dts/arm64/amlogic/meson-gxbb-odroidc2.dts index 6ded279c40c8..b46ef985bb44 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-gxbb-odroidc2.dts +++ b/sys/gnu/dts/arm64/amlogic/meson-gxbb-odroidc2.dts @@ -248,6 +248,7 @@ status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; + linux,rc-map-name = "rc-odroid"; }; &gpio_ao { diff --git a/sys/gnu/dts/arm64/amlogic/meson-gxbb-vega-s95.dtsi b/sys/gnu/dts/arm64/amlogic/meson-gxbb-vega-s95.dtsi index 5eab3dfdbd55..45cb83625951 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-gxbb-vega-s95.dtsi +++ b/sys/gnu/dts/arm64/amlogic/meson-gxbb-vega-s95.dtsi @@ -245,6 +245,9 @@ bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; }; }; diff --git a/sys/gnu/dts/arm64/amlogic/meson-gxl-s905x-p212.dtsi b/sys/gnu/dts/arm64/amlogic/meson-gxl-s905x-p212.dtsi index 43eb7d149e36..6ac678f88bd8 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-gxl-s905x-p212.dtsi +++ b/sys/gnu/dts/arm64/amlogic/meson-gxl-s905x-p212.dtsi @@ -15,7 +15,6 @@ / { aliases { serial0 = &uart_AO; - serial1 = &uart_A; ethernet0 = ðmac; }; @@ -180,6 +179,14 @@ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; pinctrl-names = "default"; uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; }; &uart_AO { diff --git a/sys/gnu/dts/arm64/amlogic/meson-gxm-khadas-vim2.dts b/sys/gnu/dts/arm64/amlogic/meson-gxm-khadas-vim2.dts index d5dc12878dfe..27eeab71ec77 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-gxm-khadas-vim2.dts +++ b/sys/gnu/dts/arm64/amlogic/meson-gxm-khadas-vim2.dts @@ -8,7 +8,6 @@ /dts-v1/; #include <dt-bindings/input/input.h> -#include <dt-bindings/thermal/thermal.h> #include "meson-gxm.dtsi" @@ -100,49 +99,6 @@ clock-names = "ext_clock"; }; - thermal-zones { - cpu-thermal { - polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ - - thermal-sensors = <&scpi_sensors 0>; - - trips { - cpu_alert0: cpu-alert0 { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - - cpu_alert1: cpu-alert1 { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>; - }; - - map1 { - trip = <&cpu_alert1>; - cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>, - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - hdmi_5v: regulator-hdmi-5v { compatible = "regulator-fixed"; @@ -198,36 +154,23 @@ hdmi-phandle = <&hdmi_tx>; }; -&cpu0 { - #cooling-cells = <2>; -}; - -&cpu1 { - #cooling-cells = <2>; -}; - -&cpu2 { - #cooling-cells = <2>; -}; - -&cpu3 { - #cooling-cells = <2>; -}; - -&cpu4 { - #cooling-cells = <2>; -}; -&cpu5 { - #cooling-cells = <2>; -}; - -&cpu6 { - #cooling-cells = <2>; -}; +&cpu_cooling_maps { + map0 { + cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>; + }; -&cpu7 { - #cooling-cells = <2>; + map1 { + cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>, + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; }; ðmac { diff --git a/sys/gnu/dts/arm64/amlogic/meson-gxm.dtsi b/sys/gnu/dts/arm64/amlogic/meson-gxm.dtsi index 5ff64a0d2dcf..b6f89f108e28 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-gxm.dtsi +++ b/sys/gnu/dts/arm64/amlogic/meson-gxm.dtsi @@ -49,6 +49,7 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 1>; + #cooling-cells = <2>; }; cpu5: cpu@101 { @@ -58,6 +59,7 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 1>; + #cooling-cells = <2>; }; cpu6: cpu@102 { @@ -67,6 +69,7 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 1>; + #cooling-cells = <2>; }; cpu7: cpu@103 { @@ -76,6 +79,7 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 1>; + #cooling-cells = <2>; }; }; }; @@ -124,6 +128,30 @@ compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc"; }; +&cpu_cooling_maps { + map0 { + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; +}; + &saradc { compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc"; }; diff --git a/sys/gnu/dts/arm64/amlogic/meson-khadas-vim3.dtsi b/sys/gnu/dts/arm64/amlogic/meson-khadas-vim3.dtsi index 90815fa25ec6..094ecf2222bb 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-khadas-vim3.dtsi +++ b/sys/gnu/dts/arm64/amlogic/meson-khadas-vim3.dtsi @@ -9,8 +9,6 @@ #include <dt-bindings/gpio/meson-g12a-gpio.h> / { - model = "Khadas VIM3"; - aliases { serial0 = &uart_AO; ethernet0 = ðmac; @@ -312,7 +310,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; @@ -328,6 +326,26 @@ vqmmc-supply = <&emmc_1v8>; }; +/* + * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS + * and eMMC Data 4 to 7 pins. + * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0, + * and change bus-width to 4 then spifc can be enabled. + */ +&spifc { + status = "disabled"; + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + + w25q32: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128fw", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + }; +}; + &uart_A { status = "okay"; pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; diff --git a/sys/gnu/dts/arm64/amlogic/meson-sm1-sei610.dts b/sys/gnu/dts/arm64/amlogic/meson-sm1-sei610.dts index cb1b48f5b8b1..dfb2438851c0 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-sm1-sei610.dts +++ b/sys/gnu/dts/arm64/amlogic/meson-sm1-sei610.dts @@ -518,7 +518,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/sys/gnu/dts/arm64/amlogic/meson-sm1.dtsi b/sys/gnu/dts/arm64/amlogic/meson-sm1.dtsi index d847a3fcbc85..d4ec735fb1a5 100644 --- a/sys/gnu/dts/arm64/amlogic/meson-sm1.dtsi +++ b/sys/gnu/dts/arm64/amlogic/meson-sm1.dtsi @@ -448,6 +448,7 @@ <&clkc_audio AUD_CLKID_PDM_DCLK>, <&clkc_audio AUD_CLKID_PDM_SYSCLK>; clock-names = "pclk", "dclk", "sysclk"; + resets = <&clkc_audio AUD_RESET_PDM>; status = "disabled"; }; }; diff --git a/sys/gnu/dts/arm64/arm/foundation-v8.dtsi b/sys/gnu/dts/arm64/arm/foundation-v8.dtsi index 3f78373f708a..12f039fa3dad 100644 --- a/sys/gnu/dts/arm64/arm/foundation-v8.dtsi +++ b/sys/gnu/dts/arm64/arm/foundation-v8.dtsi @@ -92,7 +92,7 @@ timeout-sec = <30>; }; - smb@8000000 { + bus@8000000 { compatible = "arm,vexpress,v2m-p1", "simple-bus"; arm,v2m-memory-map = "rs1"; #address-cells = <2>; /* SMB chipselect number and offset */ diff --git a/sys/gnu/dts/arm64/arm/fvp-base-revc.dts b/sys/gnu/dts/arm64/arm/fvp-base-revc.dts index 335fff762451..66381d89c1ce 100644 --- a/sys/gnu/dts/arm64/arm/fvp-base-revc.dts +++ b/sys/gnu/dts/arm64/arm/fvp-base-revc.dts @@ -206,7 +206,7 @@ }; }; - smb@8000000 { + bus@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/sys/gnu/dts/arm64/arm/juno-base.dtsi b/sys/gnu/dts/arm64/arm/juno-base.dtsi index 1f3c80aafbd7..f5889281545f 100644 --- a/sys/gnu/dts/arm64/arm/juno-base.dtsi +++ b/sys/gnu/dts/arm64/arm/juno-base.dtsi @@ -800,7 +800,7 @@ <0x00000008 0x80000000 0x1 0x80000000>; }; - smb@8000000 { + bus@8000000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <1>; diff --git a/sys/gnu/dts/arm64/arm/juno-motherboard.dtsi b/sys/gnu/dts/arm64/arm/juno-motherboard.dtsi index 9f60dacb4f80..e3983ded3c3c 100644 --- a/sys/gnu/dts/arm64/arm/juno-motherboard.dtsi +++ b/sys/gnu/dts/arm64/arm/juno-motherboard.dtsi @@ -8,7 +8,7 @@ */ / { - smb@8000000 { + bus@8000000 { mb_clk24mhz: clk24mhz { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/sys/gnu/dts/arm64/arm/rtsm_ve-aemv8a.dts b/sys/gnu/dts/arm64/arm/rtsm_ve-aemv8a.dts index 6e685d883303..c5d15cbd8cf6 100644 --- a/sys/gnu/dts/arm64/arm/rtsm_ve-aemv8a.dts +++ b/sys/gnu/dts/arm64/arm/rtsm_ve-aemv8a.dts @@ -132,7 +132,7 @@ }; }; - smb@8000000 { + bus@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/sys/gnu/dts/arm64/arm/rtsm_ve-motherboard-rs2.dtsi b/sys/gnu/dts/arm64/arm/rtsm_ve-motherboard-rs2.dtsi index 57b0b9d7f3fa..60703b5763c6 100644 --- a/sys/gnu/dts/arm64/arm/rtsm_ve-motherboard-rs2.dtsi +++ b/sys/gnu/dts/arm64/arm/rtsm_ve-motherboard-rs2.dtsi @@ -5,7 +5,7 @@ * "rs2" extension for the v2m motherboard */ / { - smb@8000000 { + bus@8000000 { motherboard { arm,v2m-memory-map = "rs2"; diff --git a/sys/gnu/dts/arm64/arm/rtsm_ve-motherboard.dtsi b/sys/gnu/dts/arm64/arm/rtsm_ve-motherboard.dtsi index 03a7bf079c8f..e333c8d2d0e4 100644 --- a/sys/gnu/dts/arm64/arm/rtsm_ve-motherboard.dtsi +++ b/sys/gnu/dts/arm64/arm/rtsm_ve-motherboard.dtsi @@ -8,7 +8,7 @@ * VEMotherBoard.lisa */ / { - smb@8000000 { + bus@8000000 { motherboard { arm,v2m-memory-map = "rs1"; compatible = "arm,vexpress,v2m-p1", "simple-bus"; diff --git a/sys/gnu/dts/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts b/sys/gnu/dts/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts index 22383c26bb03..d859914500a7 100644 --- a/sys/gnu/dts/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/sys/gnu/dts/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -144,7 +144,7 @@ }; }; - smb: smb@8000000 { + smb: bus@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/sys/gnu/dts/arm64/arm/vexpress-v2m-rs1.dtsi b/sys/gnu/dts/arm64/arm/vexpress-v2m-rs1.dtsi index dfae90adbb7c..5c183483ec3b 100644 --- a/sys/gnu/dts/arm64/arm/vexpress-v2m-rs1.dtsi +++ b/sys/gnu/dts/arm64/arm/vexpress-v2m-rs1.dtsi @@ -19,7 +19,7 @@ */ / { - smb@8000000 { + bus@8000000 { motherboard { model = "V2M-P1"; arm,hbi = <0x190>; diff --git a/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts new file mode 100644 index 000000000000..4b4cc6a1573d --- /dev/null +++ b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree File for the Kontron KBox A-230-LS. + * + * This consists of a Kontron SMARC-sAL28 (Dual PHY) and a special + * carrier (s1914). + * + * Copyright (C) 2019 Michael Walle <michael@walle.cc> + * + */ + +/dts-v1/; +#include "fsl-ls1028a-kontron-sl28-var4.dts" + +/ { + model = "Kontron KBox A-230-LS"; + compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4", + "kontron,sl28", "fsl,ls1028a"; +}; + +&enetc_mdio_pf3 { + /* BCM54140 QSGMII quad PHY */ + qsgmii_phy0: ethernet-phy@7 { + reg = <7>; + }; + + qsgmii_phy1: ethernet-phy@8 { + reg = <8>; + }; + + qsgmii_phy2: ethernet-phy@9 { + reg = <9>; + }; + + qsgmii_phy3: ethernet-phy@10 { + reg = <10>; + }; +}; + +&enetc_port2 { + status = "okay"; +}; + +&i2c3 { + eeprom@57 { + compatible = "atmel,24c32"; + reg = <0x57>; + pagesize = <32>; + }; +}; + +&mscc_felix { + status = "okay"; +}; + +&mscc_felix_port0 { + label = "swp0"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy0>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port1 { + label = "swp1"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy1>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port2 { + label = "swp2"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy2>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port3 { + label = "swp3"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy3>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port4 { + ethernet = <&enetc_port2>; + status = "okay"; +}; diff --git a/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-sl28-var2.dts new file mode 100644 index 000000000000..901b5b161def --- /dev/null +++ b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-sl28-var2.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for the Kontron SMARC-sAL28 board. + * + * This is for the network variant 2 which has two ethernet ports. These + * ports are connected to the internal switch. + * + * Copyright (C) 2020 Michael Walle <michael@walle.cc> + * + */ + +/dts-v1/; +#include "fsl-ls1028a-kontron-sl28.dts" + +/ { + model = "Kontron SMARC-sAL28 (TSN-on-module)"; + compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a"; +}; + +&enetc_mdio_pf3 { + phy0: ethernet-phy@5 { + reg = <0x5>; + eee-broken-1000t; + eee-broken-100tx; + }; + + phy1: ethernet-phy@4 { + reg = <0x4>; + eee-broken-1000t; + eee-broken-100tx; + }; +}; + +&enetc_port0 { + status = "disabled"; + /* + * In the base device tree the PHY was registered in the mdio + * subnode as it is PHY for this port. On this module this PHY + * is connected to a switch port instead and registered above. + * Therefore, delete the mdio subnode as well as the phy-handle + * property here. + */ + /delete-property/ phy-handle; + /delete-node/ mdio; +}; + +&enetc_port2 { + status = "okay"; +}; + +&mscc_felix { + status = "okay"; +}; + +&mscc_felix_port0 { + label = "gbe0"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&mscc_felix_port1 { + label = "gbe1"; + phy-handle = <&phy1>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&mscc_felix_port4 { + ethernet = <&enetc_port2>; + status = "okay"; +}; diff --git a/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts new file mode 100644 index 000000000000..0973a6a45217 --- /dev/null +++ b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for the Kontron SMARC-sAL28 board on a SMARC Eval 2.0 + * carrier (ADS2). + * + * Copyright (C) 2019 Michael Walle <michael@walle.cc> + * + */ + +/dts-v1/; +#include "fsl-ls1028a-kontron-sl28.dts" + +/ { + model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier"; + compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3", + "kontron,sl28", "fsl,ls1028a"; + + sound { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-audio-card"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out Jack", + "Microphone", "Microphone Jack", + "Line", "Line In Jack"; + simple-audio-card,routing = + "Line Out Jack", "LINEOUTR", + "Line Out Jack", "LINEOUTL", + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "IN1L", "Line In Jack", + "IN1R", "Line In Jack", + "Microphone Jack", "MICBIAS", + "IN2L", "Microphone Jack", + "IN2R", "Microphone Jack"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,dai-link@0 { + reg = <0>; + bitclock-master = <&dailink0_master>; + frame-master = <&dailink0_master>; + format = "i2s"; + + cpu { + sound-dai = <&sai6>; + }; + + dailink0_master: codec { + sound-dai = <&wm8904>; + }; + }; + + simple-audio-card,dai-link@1 { + reg = <1>; + bitclock-master = <&dailink1_master>; + frame-master = <&dailink1_master>; + format = "i2s"; + + cpu { + sound-dai = <&sai5>; + }; + + dailink1_master: codec { + sound-dai = <&wm8904>; + }; + }; + }; +}; + +&dspi2 { + flash@0 { + compatible = "jedec,spi-nor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + reg = <0>; + }; +}; + +&i2c3 { + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; +}; + +&i2c4 { + status = "okay"; + + wm8904: audio-codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&mclk>; + clock-names = "mclk"; + assigned-clocks = <&mclk>; + assigned-clock-rates = <1250000>; + }; +}; + +&sai5 { + status = "okay"; +}; + +&sai6 { + status = "okay"; +}; + +&soc { + mclk: clock-mclk@f130080 { + compatible = "fsl,vf610-sai-clock"; + reg = <0x0 0xf130080 0x0 0x80>; + clocks = <&clockgen 4 1>; + #clock-cells = <0>; + }; +}; diff --git a/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-sl28-var4.dts new file mode 100644 index 000000000000..df212ed5bb94 --- /dev/null +++ b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-sl28-var4.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for the Kontron SMARC-sAL28 board. + * + * This is for the network variant 4 which has two ethernet ports. It + * extends the base and provides one more port connected via RGMII. + * + * Copyright (C) 2019 Michael Walle <michael@walle.cc> + * + */ + +/dts-v1/; +#include "fsl-ls1028a-kontron-sl28.dts" +#include <dt-bindings/net/qca-ar803x.h> + +/ { + model = "Kontron SMARC-sAL28 (Dual PHY)"; + compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a"; +}; + +&enetc_port1 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@4 { + reg = <0x4>; + eee-broken-1000t; + eee-broken-100tx; + + qca,clk-out-frequency = <125000000>; + qca,clk-out-strength = <AR803X_STRENGTH_FULL>; + + vddio-supply = <&vddh>; + + vddio: vddio-regulator { + regulator-name = "VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddh: vddh-regulator { + regulator-name = "VDDH"; + }; + }; + }; +}; diff --git a/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-sl28.dts b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-sl28.dts new file mode 100644 index 000000000000..1648a04ea79f --- /dev/null +++ b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-kontron-sl28.dts @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for the Kontron SMARC-sAL28 board. + * + * Copyright (C) 2019 Michael Walle <michael@walle.cc> + * + */ + +/dts-v1/; +#include "fsl-ls1028a.dtsi" + +/ { + model = "Kontron SMARC-sAL28"; + compatible = "kontron,sl28", "fsl,ls1028a"; + + aliases { + crypto = &crypto; + serial0 = &duart0; + serial1 = &duart1; + spi0 = &fspi; + spi1 = &dspi2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&dspi2 { + status = "okay"; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&enetc_port0 { + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@5 { + reg = <0x5>; + eee-broken-1000t; + eee-broken-100tx; + }; + }; +}; + +&esdhc { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&fspi { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + m25p,fast-read; + spi-max-frequency = <133000000>; + reg = <0>; + /* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <2>; /* 2 SPI Rx lines */ + spi-tx-bus-width = <1>; /* 1 SPI Tx line */ + + partition@0 { + reg = <0x000000 0x010000>; + label = "rcw"; + read-only; + }; + + partition@10000 { + reg = <0x010000 0x0f0000>; + label = "failsafe bootloader"; + read-only; + }; + + partition@100000 { + reg = <0x100000 0x040000>; + label = "failsafe DP firmware"; + read-only; + }; + + partition@140000 { + reg = <0x140000 0x0a0000>; + label = "failsafe trusted firmware"; + read-only; + }; + + partition@1e0000 { + reg = <0x1e0000 0x020000>; + label = "reserved"; + read-only; + }; + + partition@200000 { + reg = <0x200000 0x010000>; + label = "configuration store"; + }; + + partition@210000 { + reg = <0x210000 0x0f0000>; + label = "bootloader"; + }; + + partition@300000 { + reg = <0x300000 0x040000>; + label = "DP firmware"; + }; + + partition@340000 { + reg = <0x340000 0x0a0000>; + label = "trusted firmware"; + }; + + partition@3e0000 { + reg = <0x3e0000 0x020000>; + label = "bootloader environment"; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "TDO", "TCK", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "TMS", "TDI", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c0 { + status = "okay"; + + rtc@32 { + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; +}; diff --git a/sys/gnu/dts/arm64/freescale/fsl-ls1028a-qds.dts b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-qds.dts index ca409d907b36..dd69c5b821e9 100644 --- a/sys/gnu/dts/arm64/freescale/fsl-ls1028a-qds.dts +++ b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-qds.dts @@ -225,6 +225,7 @@ &enetc_port1 { phy-handle = <&qds_phy1>; phy-connection-type = "rgmii-id"; + status = "okay"; }; &sai1 { diff --git a/sys/gnu/dts/arm64/freescale/fsl-ls1028a-rdb.dts b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-rdb.dts index afb55653850d..c2dc1232f93f 100644 --- a/sys/gnu/dts/arm64/freescale/fsl-ls1028a-rdb.dts +++ b/sys/gnu/dts/arm64/freescale/fsl-ls1028a-rdb.dts @@ -177,9 +177,29 @@ status = "okay"; }; +&enetc_mdio_pf3 { + /* VSC8514 QSGMII quad PHY */ + qsgmii_phy0: ethernet-phy@10 { + reg = <0x10>; + }; + + qsgmii_phy1: ethernet-phy@11 { + reg = <0x11>; + }; + + qsgmii_phy2: ethernet-phy@12 { + reg = <0x12>; + }; + + qsgmii_phy3: ethernet-phy@13 { + reg = <0x13>; + }; +}; + &enetc_port0 { phy-handle = <&sgmii_phy0>; phy-connection-type = "sgmii"; + status = "okay"; mdio { #address-cells = <1>; @@ -190,8 +210,49 @@ }; }; -&enetc_port1 { - status = "disabled"; +&enetc_port2 { + status = "okay"; +}; + +&mscc_felix { + status = "okay"; +}; + +&mscc_felix_port0 { + label = "swp0"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy0>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port1 { + label = "swp1"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy1>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port2 { + label = "swp2"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy2>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port3 { + label = "swp3"; + managed = "in-band-status"; + phy-handle = <&qsgmii_phy3>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port4 { + ethernet = <&enetc_port2>; + status = "okay"; }; &sai4 { diff --git a/sys/gnu/dts/arm64/freescale/fsl-ls1028a.dtsi b/sys/gnu/dts/arm64/freescale/fsl-ls1028a.dtsi index 55b71bb4baf8..13d0570c7ed6 100644 --- a/sys/gnu/dts/arm64/freescale/fsl-ls1028a.dtsi +++ b/sys/gnu/dts/arm64/freescale/fsl-ls1028a.dtsi @@ -290,6 +290,45 @@ status = "disabled"; }; + dspi0: spi@2100000 { + compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen 4 1>; + spi-num-chipselects = <4>; + little-endian; + status = "disabled"; + }; + + dspi1: spi@2110000 { + compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2110000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen 4 1>; + spi-num-chipselects = <4>; + little-endian; + status = "disabled"; + }; + + dspi2: spi@2120000 { + compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2120000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen 4 1>; + spi-num-chipselects = <3>; + little-endian; + status = "disabled"; + }; + esdhc: mmc@2140000 { compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; @@ -333,9 +372,82 @@ status = "disabled"; }; + + lpuart0: serial@2260000 { + compatible = "fsl,ls1028a-lpuart"; + reg = <0x0 0x2260000 0x0 0x1000>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 32>, + <&edma0 1 33>; + status = "disabled"; + }; + + lpuart1: serial@2270000 { + compatible = "fsl,ls1028a-lpuart"; + reg = <0x0 0x2270000 0x0 0x1000>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 30>, + <&edma0 1 31>; + status = "disabled"; + }; + + lpuart2: serial@2280000 { + compatible = "fsl,ls1028a-lpuart"; + reg = <0x0 0x2280000 0x0 0x1000>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 28>, + <&edma0 1 29>; + status = "disabled"; + }; + + lpuart3: serial@2290000 { + compatible = "fsl,ls1028a-lpuart"; + reg = <0x0 0x2290000 0x0 0x1000>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 26>, + <&edma0 1 27>; + status = "disabled"; + }; + + lpuart4: serial@22a0000 { + compatible = "fsl,ls1028a-lpuart"; + reg = <0x0 0x22a0000 0x0 0x1000>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 24>, + <&edma0 1 25>; + status = "disabled"; + }; + + lpuart5: serial@22b0000 { + compatible = "fsl,ls1028a-lpuart"; + reg = <0x0 0x22b0000 0x0 0x1000>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 22>, + <&edma0 1 23>; + status = "disabled"; + }; + edma0: dma-controller@22c0000 { #dma-cells = <2>; - compatible = "fsl,ls1028a-edma"; + compatible = "fsl,ls1028a-edma", "fsl,vf610-edma"; reg = <0x0 0x22c0000 0x0 0x10000>, <0x0 0x22d0000 0x0 0x10000>, <0x0 0x22e0000 0x0 0x10000>; @@ -411,6 +523,60 @@ status = "disabled"; }; + pcie@3400000 { + compatible = "fsl,ls1028a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x80 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "pme", "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-viewport = <8>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + status = "disabled"; + }; + + pcie@3500000 { + compatible = "fsl,ls1028a-pcie"; + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ + 0x88 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme", "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-viewport = <8>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + status = "disabled"; + }; + smmu: iommu@5000000 { compatible = "arm,mmu-500"; reg = <0 0x5000000 0 0x800000>; @@ -683,7 +849,6 @@ reg = <0x01 0xf0000000 0x0 0x100000>; #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; msi-parent = <&its>; device_type = "pci"; bus-range = <0x0 0x0>; @@ -701,27 +866,115 @@ /* PF1: VF0-1 BAR0 - non-prefetchable memory */ 0x82000000 0x0 0x00000000 0x1 0xf8210000 0x0 0x020000 /* PF1: VF0-1 BAR2 - prefetchable memory */ - 0xc2000000 0x0 0x00000000 0x1 0xf8230000 0x0 0x020000>; + 0xc2000000 0x0 0x00000000 0x1 0xf8230000 0x0 0x020000 + /* BAR4 (PF5) - non-prefetchable memory */ + 0x82000000 0x0 0x00000000 0x1 0xfc000000 0x0 0x400000>; enetc_port0: ethernet@0,0 { compatible = "fsl,enetc"; reg = <0x000000 0 0 0 0>; + status = "disabled"; }; + enetc_port1: ethernet@0,1 { compatible = "fsl,enetc"; reg = <0x000100 0 0 0 0>; + status = "disabled"; + }; + + enetc_port2: ethernet@0,2 { + compatible = "fsl,enetc"; + reg = <0x000200 0 0 0 0>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; }; + enetc_mdio_pf3: mdio@0,3 { compatible = "fsl,enetc-mdio"; reg = <0x000300 0 0 0 0>; #address-cells = <1>; #size-cells = <0>; }; + ethernet@0,4 { compatible = "fsl,enetc-ptp"; reg = <0x000400 0 0 0 0>; clocks = <&clockgen 4 0>; little-endian; + fsl,extts-fifo; + }; + + mscc_felix: ethernet-switch@0,5 { + reg = <0x000500 0 0 0 0>; + /* IEP INT_B */ + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* External ports */ + mscc_felix_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + mscc_felix_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + mscc_felix_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + mscc_felix_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + /* Internal ports */ + mscc_felix_port4: port@4 { + reg = <4>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + mscc_felix_port5: port@5 { + reg = <5>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + enetc_port3: ethernet@0,6 { + compatible = "fsl,enetc"; + reg = <0x000600 0 0 0 0>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; }; }; }; diff --git a/sys/gnu/dts/arm64/freescale/fsl-ls1088a-rdb.dts b/sys/gnu/dts/arm64/freescale/fsl-ls1088a-rdb.dts index 4d77b345cebd..5633e59febc3 100644 --- a/sys/gnu/dts/arm64/freescale/fsl-ls1088a-rdb.dts +++ b/sys/gnu/dts/arm64/freescale/fsl-ls1088a-rdb.dts @@ -83,6 +83,7 @@ }; &esdhc { + mmc-hs200-1_8v; status = "okay"; }; diff --git a/sys/gnu/dts/arm64/freescale/fsl-ls1088a.dtsi b/sys/gnu/dts/arm64/freescale/fsl-ls1088a.dtsi index 594566265e3d..36a799554620 100644 --- a/sys/gnu/dts/arm64/freescale/fsl-ls1088a.dtsi +++ b/sys/gnu/dts/arm64/freescale/fsl-ls1088a.dtsi @@ -393,6 +393,7 @@ reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ clock-frequency = <0>; + clocks = <&clockgen 2 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; little-endian; @@ -493,6 +494,7 @@ <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ status = "disabled"; }; @@ -518,6 +520,7 @@ <0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ status = "disabled"; }; @@ -543,6 +546,7 @@ <0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ status = "disabled"; }; diff --git a/sys/gnu/dts/arm64/freescale/fsl-ls208xa.dtsi b/sys/gnu/dts/arm64/freescale/fsl-ls208xa.dtsi index f96d06da96be..3944ef16ec60 100644 --- a/sys/gnu/dts/arm64/freescale/fsl-ls208xa.dtsi +++ b/sys/gnu/dts/arm64/freescale/fsl-ls208xa.dtsi @@ -648,6 +648,7 @@ <0000 0 0 2 &gic 0 0 0 110 4>, <0000 0 0 3 &gic 0 0 0 111 4>, <0000 0 0 4 &gic 0 0 0 112 4>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ status = "disabled"; }; @@ -669,6 +670,7 @@ <0000 0 0 2 &gic 0 0 0 115 4>, <0000 0 0 3 &gic 0 0 0 116 4>, <0000 0 0 4 &gic 0 0 0 117 4>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ status = "disabled"; }; @@ -690,6 +692,7 @@ <0000 0 0 2 &gic 0 0 0 120 4>, <0000 0 0 3 &gic 0 0 0 121 4>, <0000 0 0 4 &gic 0 0 0 122 4>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ status = "disabled"; }; @@ -711,6 +714,7 @@ <0000 0 0 2 &gic 0 0 0 125 4>, <0000 0 0 3 &gic 0 0 0 126 4>, <0000 0 0 4 &gic 0 0 0 127 4>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ status = "disabled"; }; diff --git a/sys/gnu/dts/arm64/freescale/fsl-lx2160a-cex7.dtsi b/sys/gnu/dts/arm64/freescale/fsl-lx2160a-cex7.dtsi index 071e21678f77..d87d16460875 100644 --- a/sys/gnu/dts/arm64/freescale/fsl-lx2160a-cex7.dtsi +++ b/sys/gnu/dts/arm64/freescale/fsl-lx2160a-cex7.dtsi @@ -59,6 +59,32 @@ #size-cells = <0>; reg = <0x77>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,spd"; + reg = <0x51>; + }; + + eeprom@53 { + compatible = "atmel,spd"; + reg = <0x53>; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; + }; + i2c@1 { #address-cells = <1>; #size-cells = <0>; @@ -73,6 +99,17 @@ }; }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + regulator@5c { + compatible = "lltc,ltc3882"; + reg = <0x5c>; + }; + }; + i2c@3 { #address-cells = <1>; #size-cells = <0>; diff --git a/sys/gnu/dts/arm64/freescale/fsl-lx2160a-qds.dts b/sys/gnu/dts/arm64/freescale/fsl-lx2160a-qds.dts index 1a5acf62f23c..3b88e1efe4db 100644 --- a/sys/gnu/dts/arm64/freescale/fsl-lx2160a-qds.dts +++ b/sys/gnu/dts/arm64/freescale/fsl-lx2160a-qds.dts @@ -43,6 +43,21 @@ status = "okay"; }; +&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; +}; + &i2c0 { status = "okay"; diff --git a/sys/gnu/dts/arm64/freescale/fsl-lx2160a-rdb.dts b/sys/gnu/dts/arm64/freescale/fsl-lx2160a-rdb.dts index 51615de102fe..22d0308eb13b 100644 --- a/sys/gnu/dts/arm64/freescale/fsl-lx2160a-rdb.dts +++ b/sys/gnu/dts/arm64/freescale/fsl-lx2160a-rdb.dts @@ -84,7 +84,7 @@ mt35xu512aba0: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,m25p80"; + compatible = "jedec,spi-nor"; m25p,fast-read; spi-max-frequency = <50000000>; reg = <0>; @@ -95,7 +95,7 @@ mt35xu512aba1: flash@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,m25p80"; + compatible = "jedec,spi-nor"; m25p,fast-read; spi-max-frequency = <50000000>; reg = <1>; diff --git a/sys/gnu/dts/arm64/freescale/fsl-lx2160a.dtsi b/sys/gnu/dts/arm64/freescale/fsl-lx2160a.dtsi index e5ee5591e52b..ae1b113ab162 100644 --- a/sys/gnu/dts/arm64/freescale/fsl-lx2160a.dtsi +++ b/sys/gnu/dts/arm64/freescale/fsl-lx2160a.dtsi @@ -834,6 +834,174 @@ status = "disabled"; }; + pcie@3400000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x80 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + apio-wins = <8>; + ppio-wins = <8>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + status = "disabled"; + }; + + pcie@3500000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ + 0x88 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + apio-wins = <8>; + ppio-wins = <8>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + status = "disabled"; + }; + + pcie@3600000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ + 0x90 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + apio-wins = <256>; + ppio-wins = <24>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + status = "disabled"; + }; + + pcie@3700000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ + 0x98 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + apio-wins = <8>; + ppio-wins = <8>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + status = "disabled"; + }; + + pcie@3800000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */ + 0xa0 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + apio-wins = <256>; + ppio-wins = <24>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + status = "disabled"; + }; + + pcie@3900000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */ + 0xa8 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + apio-wins = <8>; + ppio-wins = <8>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + status = "disabled"; + }; + smmu: iommu@5000000 { compatible = "arm,mmu-500"; reg = <0 0x5000000 0 0x800000>; diff --git a/sys/gnu/dts/arm64/freescale/imx8mm-evk.dts b/sys/gnu/dts/arm64/freescale/imx8mm-evk.dts index 9e54747cf4e6..951e14a3de0e 100644 --- a/sys/gnu/dts/arm64/freescale/imx8mm-evk.dts +++ b/sys/gnu/dts/arm64/freescale/imx8mm-evk.dts @@ -107,6 +107,8 @@ pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; + phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; fsl,magic-packet; status = "okay"; diff --git a/sys/gnu/dts/arm64/freescale/imx8mm.dtsi b/sys/gnu/dts/arm64/freescale/imx8mm.dtsi index 1e5e11592f7b..8829628f757a 100644 --- a/sys/gnu/dts/arm64/freescale/imx8mm.dtsi +++ b/sys/gnu/dts/arm64/freescale/imx8mm.dtsi @@ -68,6 +68,7 @@ nvmem-cells = <&cpu_speed_grade>; nvmem-cell-names = "speed_grade"; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_1: cpu@1 { @@ -80,6 +81,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_2: cpu@2 { @@ -92,6 +94,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_3: cpu@3 { @@ -104,6 +107,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_L2: l2-cache0 { @@ -204,6 +208,38 @@ arm,no-tick-in-suspend; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu>; + trips { + cpu_alert0: trip0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + usbphynop1: usbphynop1 { compatible = "usb-nop-xceiv"; clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; @@ -227,7 +263,8 @@ ranges = <0x0 0x0 0x0 0x3e000000>; aips1: bus@30000000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30000000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; @@ -363,6 +400,13 @@ gpio-ranges = <&iomuxc 0 119 30>; }; + tmu: tmu@30260000 { + compatible = "fsl,imx8mm-tmu"; + reg = <0x30260000 0x10000>; + clocks = <&clk IMX8MM_CLK_TMU_ROOT>; + #thermal-sensor-cells = <0>; + }; + wdog1: watchdog@30280000 { compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; @@ -455,6 +499,8 @@ compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; + clock-names = "snvs-pwrkey"; linux,keycode = <KEY_POWER>; wakeup-source; status = "disabled"; @@ -496,7 +542,8 @@ }; aips2: bus@30400000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30400000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x30400000 0x30400000 0x400000>; @@ -555,10 +602,12 @@ }; aips3: bus@30800000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30800000 0x400000>; #address-cells = <1>; #size-cells = <1>; - ranges = <0x30800000 0x30800000 0x400000>; + ranges = <0x30800000 0x30800000 0x400000>, + <0x8000000 0x8000000 0x10000000>; ecspi1: spi@30820000 { compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; @@ -760,6 +809,19 @@ status = "disabled"; }; + flexspi: spi@30bb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,imx8mm-fspi"; + reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_QSPI_ROOT>, + <&clk IMX8MM_CLK_QSPI_ROOT>; + clock-names = "fspi", "fspi_en"; + status = "disabled"; + }; + sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; reg = <0x30bd0000 0x10000>; @@ -800,7 +862,8 @@ }; aips4: bus@32c00000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x32c00000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; @@ -896,7 +959,6 @@ ddr-pmu@3d800000 { compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu"; reg = <0x3d800000 0x400000>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/sys/gnu/dts/arm64/freescale/imx8mn-evk.dtsi b/sys/gnu/dts/arm64/freescale/imx8mn-evk.dtsi index 0d2ec4a2c7f2..85fc0aa38c4f 100644 --- a/sys/gnu/dts/arm64/freescale/imx8mn-evk.dtsi +++ b/sys/gnu/dts/arm64/freescale/imx8mn-evk.dtsi @@ -102,6 +102,20 @@ }; }; +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &snvs_pwrkey { status = "okay"; }; @@ -202,6 +216,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { fsl,pins = < MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 diff --git a/sys/gnu/dts/arm64/freescale/imx8mn.dtsi b/sys/gnu/dts/arm64/freescale/imx8mn.dtsi index a44b5438e842..43971abe218b 100644 --- a/sys/gnu/dts/arm64/freescale/imx8mn.dtsi +++ b/sys/gnu/dts/arm64/freescale/imx8mn.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> #include "imx8mn-pinfunc.h" @@ -67,6 +68,7 @@ nvmem-cells = <&cpu_speed_grade>; nvmem-cell-names = "speed_grade"; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_1: cpu@1 { @@ -79,6 +81,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_2: cpu@2 { @@ -91,6 +94,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_3: cpu@3 { @@ -103,6 +107,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_L2: l2-cache0 { @@ -116,7 +121,7 @@ opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <850000>; + opp-microvolt = <950000>; opp-supported-hw = <0xb00>, <0x7>; clock-latency-ns = <150000>; opp-suspend; @@ -186,6 +191,38 @@ method = "smc"; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu>; + trips { + cpu_alert0: trip0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, @@ -203,7 +240,7 @@ ranges = <0x0 0x0 0x0 0x3e000000>; aips1: bus@30000000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30000000 0x400000>; #address-cells = <1>; #size-cells = <1>; @@ -274,6 +311,13 @@ gpio-ranges = <&iomuxc 0 119 30>; }; + tmu: tmu@30260000 { + compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu"; + reg = <0x30260000 0x10000>; + clocks = <&clk IMX8MN_CLK_TMU_ROOT>; + #thermal-sensor-cells = <0>; + }; + wdog1: watchdog@30280000 { compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; @@ -358,6 +402,7 @@ offset = <0x34>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SNVS_ROOT>; clock-names = "snvs-rtc"; }; @@ -365,6 +410,8 @@ compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SNVS_ROOT>; + clock-names = "snvs-pwrkey"; linux,keycode = <KEY_POWER>; wakeup-source; status = "disabled"; @@ -379,6 +426,16 @@ <&clk_ext3>, <&clk_ext4>; clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", "clk_ext3", "clk_ext4"; + assigned-clocks = <&clk IMX8MN_CLK_NOC>, + <&clk IMX8MN_CLK_AUDIO_AHB>, + <&clk IMX8MN_CLK_IPG_AUDIO_ROOT>, + <&clk IMX8MN_SYS_PLL3>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL3_OUT>, + <&clk IMX8MN_SYS_PLL1_800M>; + assigned-clock-rates = <0>, + <400000000>, + <400000000>, + <600000000>; }; src: reset-controller@30390000 { @@ -390,7 +447,7 @@ }; aips2: bus@30400000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30400000 0x400000>; #address-cells = <1>; #size-cells = <1>; @@ -450,7 +507,7 @@ }; aips3: bus@30800000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30800000 0x400000>; #address-cells = <1>; #size-cells = <1>; @@ -543,19 +600,19 @@ <&clk IMX8MN_CLK_IPG_ROOT>; clock-names = "aclk", "ipg"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr2: jr2@3000 { + sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; @@ -661,7 +718,7 @@ reg = <0x30bd0000 0x10000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>, - <&clk IMX8MN_CLK_SDMA1_ROOT>; + <&clk IMX8MN_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; @@ -696,7 +753,7 @@ }; aips4: bus@32c00000 { - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; #address-cells = <1>; #size-cells = <1>; diff --git a/sys/gnu/dts/arm64/freescale/imx8mp-evk.dts b/sys/gnu/dts/arm64/freescale/imx8mp-evk.dts new file mode 100644 index 000000000000..3da1fff3d6fd --- /dev/null +++ b/sys/gnu/dts/arm64/freescale/imx8mp-evk.dts @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "imx8mp.dtsi" + +/ { + model = "NXP i.MX8MPlus EVK board"; + compatible = "fsl,imx8mp-evk", "fsl,imx8mp"; + + chosen { + stdout-path = &uart2; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + status { + label = "yellow:status"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0xc0000000>, + <0x1 0x00000000 0 0xc0000000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + eee-broken-1000t; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x19 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grp-gpio { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/sys/gnu/dts/arm64/freescale/imx8mp-pinfunc.h b/sys/gnu/dts/arm64/freescale/imx8mp-pinfunc.h new file mode 100644 index 000000000000..319ab34cab3e --- /dev/null +++ b/sys/gnu/dts/arm64/freescale/imx8mp-pinfunc.h @@ -0,0 +1,931 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 NXP + */ + +#ifndef __DTS_IMX8MP_PINFUNC_H +#define __DTS_IMX8MP_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x014 0x274 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO00__CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x014 0x274 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO00__MEDIAMIX_ISP_FL_TRIG_0 0x014 0x274 0x5D4 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO00__ANAMIX_REF_CLK_32K 0x014 0x274 0x000 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO00__CCMSRCGPCMIX_EXT_CLK1 0x014 0x274 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO00__SJC_FAIL 0x014 0x274 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x018 0x278 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x018 0x278 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO01__MEDIAMIX_ISP_SHUTTER_TRIG_0 0x018 0x278 0x5DC 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO01__ANAMIX_REF_CLK_24M 0x018 0x278 0x000 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO01__CCMSRCGPCMIX_EXT_CLK2 0x018 0x278 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO01__SJC_ACTIVE 0x018 0x278 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO02__GPIO1_IO02 0x01C 0x27C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x01C 0x27C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO02__MEDIAMIX_ISP_FLASH_TRIG_0 0x01C 0x27C 0x000 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_ANY 0x01C 0x27C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO02__SJC_DE_B 0x01C 0x27C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x020 0x280 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO03__USDHC1_VSELECT 0x020 0x280 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO03__MEDIAMIX_ISP_PRELIGHT_TRIG_0 0x020 0x280 0x000 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO03__SDMA1_EXT_EVENT00 0x020 0x280 0x000 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO03__ANAMIX_XTAL_OK 0x020 0x280 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO03__SJC_DONE 0x020 0x280 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 0x024 0x284 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x024 0x284 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO04__MEDIAMIX_ISP_SHUTTER_OPEN_0 0x024 0x284 0x000 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO04__SDMA1_EXT_EVENT01 0x024 0x284 0x000 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO04__ANAMIX_XTAL_OK_LV 0x024 0x284 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO04__USDHC1_TEST_TRIG 0x024 0x284 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x028 0x288 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO05__M7_NMI 0x028 0x288 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO05__MEDIAMIX_ISP_FL_TRIG_1 0x028 0x288 0x5D8 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO05__CCMSRCGPCMIX_PMIC_READY 0x028 0x288 0x554 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO05__CCMSRCGPCMIX_INT_BOOT 0x028 0x288 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO05__USDHC2_TEST_TRIG 0x028 0x288 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x02C 0x28C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO06__ENET_QOS_MDC 0x02C 0x28C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO06__MEDIAMIX_ISP_SHUTTER_TRIG_1 0x02C 0x28C 0x5E0 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO06__USDHC1_CD_B 0x02C 0x28C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO06__CCMSRCGPCMIX_EXT_CLK3 0x02C 0x28C 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO06__ECSPI1_TEST_TRIG 0x02C 0x28C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x030 0x290 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO07__ENET_QOS_MDIO 0x030 0x290 0x590 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO07__MEDIAMIX_ISP_FLASH_TRIG_1 0x030 0x290 0x000 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO07__USDHC1_WP 0x030 0x290 0x000 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO07__CCMSRCGPCMIX_EXT_CLK4 0x030 0x290 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO07__ECSPI2_TEST_TRIG 0x030 0x290 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x034 0x294 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_IN 0x034 0x294 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO08__PWM1_OUT 0x034 0x294 0x000 0x2 0x0 +#define MX8MP_IOMUXC_GPIO1_IO08__MEDIAMIX_ISP_PRELIGHT_TRIG_1 0x034 0x294 0x000 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_AUX_IN 0x034 0x294 0x000 0x4 0x0 +#define MX8MP_IOMUXC_GPIO1_IO08__USDHC2_RESET_B 0x034 0x294 0x000 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO08__CCMSRCGPCMIX_WAIT 0x034 0x294 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO08__FLEXSPI_TEST_TRIG 0x034 0x294 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x038 0x298 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO09__ENET_QOS_1588_EVENT0_OUT 0x038 0x298 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT 0x038 0x298 0x000 0x2 0x0 +#define MX8MP_IOMUXC_GPIO1_IO09__MEDIAMIX_ISP_SHUTTER_OPEN_1 0x038 0x298 0x000 0x3 0x0 +#define MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B 0x038 0x298 0x000 0x4 0x0 +#define MX8MP_IOMUXC_GPIO1_IO09__AUDIOMIX_EXT_EVENT00 0x038 0x298 0x000 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO09__CCMSRCGPCMIX_STOP 0x038 0x298 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO09__RAWNAND_TEST_TRIG 0x038 0x298 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x03C 0x29C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO10__HSIOMIX_usb1_OTG_ID 0x03C 0x29C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT 0x03C 0x29C 0x000 0x2 0x0 +#define MX8MP_IOMUXC_GPIO1_IO10__OCOTP_FUSE_LATCHED 0x03C 0x29C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x040 0x2A0 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO11__HSIOMIX_usb2_OTG_ID 0x040 0x2A0 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT 0x040 0x2A0 0x000 0x2 0x0 +#define MX8MP_IOMUXC_GPIO1_IO11__USDHC3_VSELECT 0x040 0x2A0 0x000 0x4 0x0 +#define MX8MP_IOMUXC_GPIO1_IO11__CCMSRCGPCMIX_PMIC_READY 0x040 0x2A0 0x554 0x5 0x1 +#define MX8MP_IOMUXC_GPIO1_IO11__CCMSRCGPCMIX_OUT0 0x040 0x2A0 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO11__CAAM_RNG_OSC_OBS 0x040 0x2A0 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x044 0x2A4 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO12__HSIOMIX_usb1_OTG_PWR 0x044 0x2A4 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO12__AUDIOMIX_EXT_EVENT01 0x044 0x2A4 0x000 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO12__CCMSRCGPCMIX_OUT1 0x044 0x2A4 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO12__CSU_CSU_ALARM_AUT00 0x044 0x2A4 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x048 0x2A8 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO13__HSIOMIX_usb1_OTG_OC 0x048 0x2A8 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO13__PWM2_OUT 0x048 0x2A8 0x000 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO13__CCMSRCGPCMIX_OUT2 0x048 0x2A8 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO13__CSU_CSU_ALARM_AUT01 0x048 0x2A8 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x04C 0x2AC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO14__HSIOMIX_usb2_OTG_PWR 0x04C 0x2AC 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO14__USDHC3_CD_B 0x04C 0x2AC 0x608 0x4 0x0 +#define MX8MP_IOMUXC_GPIO1_IO14__PWM3_OUT 0x04C 0x2AC 0x000 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO14__CCMSRCGPCMIX_CLKO1 0x04C 0x2AC 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO14__CSU_CSU_ALARM_AUT02 0x04C 0x2AC 0x000 0x7 0x0 +#define MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x050 0x2B0 0x000 0x0 0x0 +#define MX8MP_IOMUXC_GPIO1_IO15__HSIOMIX_usb2_OTG_OC 0x050 0x2B0 0x000 0x1 0x0 +#define MX8MP_IOMUXC_GPIO1_IO15__USDHC3_WP 0x050 0x2B0 0x634 0x4 0x0 +#define MX8MP_IOMUXC_GPIO1_IO15__PWM4_OUT 0x050 0x2B0 0x000 0x5 0x0 +#define MX8MP_IOMUXC_GPIO1_IO15__CCMSRCGPCMIX_CLKO2 0x050 0x2B0 0x000 0x6 0x0 +#define MX8MP_IOMUXC_GPIO1_IO15__CSU_CSU_INT_DEB 0x050 0x2B0 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x054 0x2B4 0x000 0x0 0x0 +#define MX8MP_IOMUXC_ENET_MDC__AUDIOMIX_SAI6_TX_DATA00 0x054 0x2B4 0x000 0x2 0x0 +#define MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16 0x054 0x2B4 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_MDC__USDHC3_STROBE 0x054 0x2B4 0x630 0x6 0x0 +#define MX8MP_IOMUXC_ENET_MDC__SIM_M_HADDR15 0x054 0x2B4 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x058 0x2B8 0x590 0x0 0x1 +#define MX8MP_IOMUXC_ENET_MDIO__AUDIOMIX_SAI6_TX_SYNC 0x058 0x2B8 0x528 0x2 0x0 +#define MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17 0x058 0x2B8 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_MDIO__USDHC3_DATA5 0x058 0x2B8 0x624 0x6 0x0 +#define MX8MP_IOMUXC_ENET_MDIO__SIM_M_HADDR16 0x058 0x2B8 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x05C 0x2BC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_ENET_TD3__AUDIOMIX_SAI6_TX_BCLK 0x05C 0x2BC 0x524 0x2 0x0 +#define MX8MP_IOMUXC_ENET_TD3__GPIO1_IO18 0x05C 0x2BC 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_TD3__USDHC3_DATA6 0x05C 0x2BC 0x628 0x6 0x0 +#define MX8MP_IOMUXC_ENET_TD3__SIM_M_HADDR17 0x05C 0x2BC 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x060 0x2C0 0x000 0x0 0x0 +#define MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x060 0x2C0 0x000 0x1 0x0 +#define MX8MP_IOMUXC_ENET_TD2__AUDIOMIX_SAI6_RX_DATA00 0x060 0x2C0 0x51C 0x2 0x0 +#define MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19 0x060 0x2C0 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_TD2__USDHC3_DATA7 0x060 0x2C0 0x62C 0x6 0x0 +#define MX8MP_IOMUXC_ENET_TD2__SIM_M_HADDR18 0x060 0x2C0 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x064 0x2C4 0x000 0x0 0x0 +#define MX8MP_IOMUXC_ENET_TD1__AUDIOMIX_SAI6_RX_SYNC 0x064 0x2C4 0x520 0x2 0x0 +#define MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20 0x064 0x2C4 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_TD1__USDHC3_CD_B 0x064 0x2C4 0x608 0x6 0x1 +#define MX8MP_IOMUXC_ENET_TD1__SIM_M_HADDR19 0x064 0x2C4 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x068 0x2C8 0x000 0x0 0x0 +#define MX8MP_IOMUXC_ENET_TD0__AUDIOMIX_SAI6_RX_BCLK 0x068 0x2C8 0x518 0x2 0x0 +#define MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21 0x068 0x2C8 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_TD0__USDHC3_WP 0x068 0x2C8 0x634 0x6 0x1 +#define MX8MP_IOMUXC_ENET_TD0__SIM_M_HADDR20 0x068 0x2C8 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x06C 0x2CC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SAI6_MCLK 0x06C 0x2CC 0x514 0x2 0x0 +#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SPDIF_OUT 0x06C 0x2CC 0x000 0x3 0x0 +#define MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22 0x06C 0x2CC 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_TX_CTL__USDHC3_DATA0 0x06C 0x2CC 0x610 0x6 0x0 +#define MX8MP_IOMUXC_ENET_TX_CTL__SIM_M_HADDR21 0x06C 0x2CC 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x070 0x2D0 0x000 0x0 0x0 +#define MX8MP_IOMUXC_ENET_TXC__ENET_QOS_TX_ER 0x070 0x2D0 0x000 0x1 0x0 +#define MX8MP_IOMUXC_ENET_TXC__AUDIOMIX_SAI7_TX_DATA00 0x070 0x2D0 0x000 0x2 0x0 +#define MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23 0x070 0x2D0 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_TXC__USDHC3_DATA1 0x070 0x2D0 0x614 0x6 0x0 +#define MX8MP_IOMUXC_ENET_TXC__SIM_M_HADDR22 0x070 0x2D0 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x074 0x2D4 0x000 0x0 0x0 +#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC 0x074 0x2D4 0x540 0x2 0x0 +#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_BIT_STREAM03 0x074 0x2D4 0x4CC 0x3 0x1 +#define MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24 0x074 0x2D4 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_RX_CTL__USDHC3_DATA2 0x074 0x2D4 0x618 0x6 0x0 +#define MX8MP_IOMUXC_ENET_RX_CTL__SIM_M_HADDR23 0x074 0x2D4 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x078 0x2D8 0x000 0x0 0x0 +#define MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER 0x078 0x2D8 0x000 0x1 0x0 +#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK 0x078 0x2D8 0x53C 0x2 0x0 +#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_BIT_STREAM02 0x078 0x2D8 0x4C8 0x3 0x1 +#define MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25 0x078 0x2D8 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_RXC__USDHC3_DATA3 0x078 0x2D8 0x61C 0x6 0x0 +#define MX8MP_IOMUXC_ENET_RXC__SIM_M_HADDR24 0x078 0x2D8 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x07C 0x2DC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00 0x07C 0x2DC 0x534 0x2 0x0 +#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_BIT_STREAM01 0x07C 0x2DC 0x4C4 0x3 0x1 +#define MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26 0x07C 0x2DC 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_RD0__USDHC3_DATA4 0x07C 0x2DC 0x620 0x6 0x0 +#define MX8MP_IOMUXC_ENET_RD0__SIM_M_HADDR25 0x07C 0x2DC 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x080 0x2E0 0x000 0x0 0x0 +#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC 0x080 0x2E0 0x538 0x2 0x0 +#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_BIT_STREAM00 0x080 0x2E0 0x4C0 0x3 0x1 +#define MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27 0x080 0x2E0 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_RD1__USDHC3_RESET_B 0x080 0x2E0 0x000 0x6 0x0 +#define MX8MP_IOMUXC_ENET_RD1__SIM_M_HADDR26 0x080 0x2E0 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x084 0x2E4 0x000 0x0 0x0 +#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_SAI7_RX_BCLK 0x084 0x2E4 0x530 0x2 0x0 +#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_CLK 0x084 0x2E4 0x000 0x3 0x0 +#define MX8MP_IOMUXC_ENET_RD2__GPIO1_IO28 0x084 0x2E4 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_RD2__USDHC3_CLK 0x084 0x2E4 0x604 0x6 0x0 +#define MX8MP_IOMUXC_ENET_RD2__SIM_M_HADDR27 0x084 0x2E4 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x088 0x2E8 0x000 0x0 0x0 +#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SAI7_MCLK 0x088 0x2E8 0x52C 0x2 0x0 +#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SPDIF_IN 0x088 0x2E8 0x544 0x3 0x0 +#define MX8MP_IOMUXC_ENET_RD3__GPIO1_IO29 0x088 0x2E8 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ENET_RD3__USDHC3_CMD 0x088 0x2E8 0x60C 0x6 0x0 +#define MX8MP_IOMUXC_ENET_RD3__SIM_M_HADDR28 0x088 0x2E8 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x08C 0x2EC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD1_CLK__ENET1_MDC 0x08C 0x2EC 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SD1_CLK__I2C5_SCL 0x08C 0x2EC 0x5C4 0x3 0x0 +#define MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x08C 0x2EC 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD1_CLK__UART1_DTE_RX 0x08C 0x2EC 0x5E8 0x4 0x0 +#define MX8MP_IOMUXC_SD1_CLK__GPIO2_IO00 0x08C 0x2EC 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD1_CLK__SIM_M_HADDR29 0x08C 0x2EC 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x090 0x2F0 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD1_CMD__ENET1_MDIO 0x090 0x2F0 0x57C 0x1 0x0 +#define MX8MP_IOMUXC_SD1_CMD__I2C5_SDA 0x090 0x2F0 0x5C8 0x3 0x0 +#define MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x090 0x2F0 0x5E8 0x4 0x1 +#define MX8MP_IOMUXC_SD1_CMD__UART1_DTE_TX 0x090 0x2F0 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD1_CMD__GPIO2_IO01 0x090 0x2F0 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD1_CMD__SIM_M_HADDR30 0x090 0x2F0 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x094 0x2F4 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD1_DATA0__ENET1_RGMII_TD1 0x094 0x2F4 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL 0x094 0x2F4 0x5CC 0x3 0x0 +#define MX8MP_IOMUXC_SD1_DATA0__UART1_DCE_RTS 0x094 0x2F4 0x5E4 0x4 0x0 +#define MX8MP_IOMUXC_SD1_DATA0__UART1_DTE_CTS 0x094 0x2F4 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x094 0x2F4 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD1_DATA0__SIM_M_HADDR31 0x094 0x2F4 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x098 0x2F8 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD1_DATA1__ENET1_RGMII_TD0 0x098 0x2F8 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA 0x098 0x2F8 0x5D0 0x3 0x0 +#define MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS 0x098 0x2F8 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD1_DATA1__UART1_DTE_RTS 0x098 0x2F8 0x5E4 0x4 0x1 +#define MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03 0x098 0x2F8 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD1_DATA1__SIM_M_HBURST00 0x098 0x2F8 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x09C 0x2FC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD1_DATA2__ENET1_RGMII_RD0 0x09C 0x2FC 0x580 0x1 0x0 +#define MX8MP_IOMUXC_SD1_DATA2__I2C4_SCL 0x09C 0x2FC 0x5BC 0x3 0x0 +#define MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x09C 0x2FC 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD1_DATA2__UART2_DTE_RX 0x09C 0x2FC 0x5F0 0x4 0x0 +#define MX8MP_IOMUXC_SD1_DATA2__GPIO2_IO04 0x09C 0x2FC 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD1_DATA2__SIM_M_HBURST01 0x09C 0x2FC 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x0A0 0x300 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD1_DATA3__ENET1_RGMII_RD1 0x0A0 0x300 0x584 0x1 0x0 +#define MX8MP_IOMUXC_SD1_DATA3__I2C4_SDA 0x0A0 0x300 0x5C0 0x3 0x0 +#define MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x0A0 0x300 0x5F0 0x4 0x1 +#define MX8MP_IOMUXC_SD1_DATA3__UART2_DTE_TX 0x0A0 0x300 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD1_DATA3__GPIO2_IO05 0x0A0 0x300 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD1_DATA3__SIM_M_HBURST02 0x0A0 0x300 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4 0x0A4 0x304 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD1_DATA4__ENET1_RGMII_TX_CTL 0x0A4 0x304 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL 0x0A4 0x304 0x5A4 0x3 0x0 +#define MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x0A4 0x304 0x5EC 0x4 0x0 +#define MX8MP_IOMUXC_SD1_DATA4__UART2_DTE_CTS 0x0A4 0x304 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x0A4 0x304 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD1_DATA4__SIM_M_HRESP 0x0A4 0x304 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5 0x0A8 0x308 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD1_DATA5__ENET1_TX_ER 0x0A8 0x308 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA 0x0A8 0x308 0x5A8 0x3 0x0 +#define MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x0A8 0x308 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD1_DATA5__UART2_DTE_RTS 0x0A8 0x308 0x5EC 0x4 0x1 +#define MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x0A8 0x308 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD1_DATA5__TPSMP_HDATA05 0x0A8 0x308 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6 0x0AC 0x30C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD1_DATA6__ENET1_RGMII_RX_CTL 0x0AC 0x30C 0x588 0x1 0x0 +#define MX8MP_IOMUXC_SD1_DATA6__I2C2_SCL 0x0AC 0x30C 0x5AC 0x3 0x0 +#define MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX 0x0AC 0x30C 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD1_DATA6__UART3_DTE_RX 0x0AC 0x30C 0x5F8 0x4 0x0 +#define MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x0AC 0x30C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD1_DATA6__TPSMP_HDATA06 0x0AC 0x30C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7 0x0B0 0x310 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD1_DATA7__ENET1_RX_ER 0x0B0 0x310 0x58C 0x1 0x0 +#define MX8MP_IOMUXC_SD1_DATA7__I2C2_SDA 0x0B0 0x310 0x5B0 0x3 0x0 +#define MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX 0x0B0 0x310 0x5F8 0x4 0x1 +#define MX8MP_IOMUXC_SD1_DATA7__UART3_DTE_TX 0x0B0 0x310 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x0B0 0x310 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD1_DATA7__TPSMP_HDATA07 0x0B0 0x310 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B 0x0B4 0x314 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD1_RESET_B__ENET1_TX_CLK 0x0B4 0x314 0x578 0x1 0x0 +#define MX8MP_IOMUXC_SD1_RESET_B__I2C3_SCL 0x0B4 0x314 0x5B4 0x3 0x0 +#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS 0x0B4 0x314 0x5F4 0x4 0x0 +#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DTE_CTS 0x0B4 0x314 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x0B4 0x314 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD1_RESET_B__ECSPI3_TEST_TRIG 0x0B4 0x314 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE 0x0B8 0x318 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD1_STROBE__I2C3_SDA 0x0B8 0x318 0x5B8 0x3 0x0 +#define MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS 0x0B8 0x318 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD1_STROBE__UART3_DTE_RTS 0x0B8 0x318 0x5F4 0x4 0x1 +#define MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x0B8 0x318 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD1_STROBE__USDHC3_TEST_TRIG 0x0B8 0x318 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B 0x0BC 0x31C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x0BC 0x31C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD2_CD_B__CCMSRCGPCMIX_TESTER_ACK 0x0BC 0x31C 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x0C0 0x320 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD2_CLK__ECSPI2_SCLK 0x0C0 0x320 0x568 0x2 0x0 +#define MX8MP_IOMUXC_SD2_CLK__UART4_DCE_RX 0x0C0 0x320 0x600 0x3 0x0 +#define MX8MP_IOMUXC_SD2_CLK__UART4_DTE_TX 0x0C0 0x320 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13 0x0C0 0x320 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD2_CLK__CCMSRCGPCMIX_OBSERVE0 0x0C0 0x320 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SD2_CLK__OBSERVE_MUX_OUT00 0x0C0 0x320 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x0C4 0x324 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD2_CMD__ECSPI2_MOSI 0x0C4 0x324 0x570 0x2 0x0 +#define MX8MP_IOMUXC_SD2_CMD__UART4_DCE_TX 0x0C4 0x324 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SD2_CMD__UART4_DTE_RX 0x0C4 0x324 0x600 0x3 0x1 +#define MX8MP_IOMUXC_SD2_CMD__AUDIOMIX_CLK 0x0C4 0x324 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x0C4 0x324 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD2_CMD__CCMSRCGPCMIX_OBSERVE1 0x0C4 0x324 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SD2_CMD__OBSERVE_MUX_OUT01 0x0C4 0x324 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x0C8 0x328 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD2_DATA0__I2C4_SDA 0x0C8 0x328 0x5C0 0x2 0x1 +#define MX8MP_IOMUXC_SD2_DATA0__UART2_DCE_RX 0x0C8 0x328 0x5F0 0x3 0x2 +#define MX8MP_IOMUXC_SD2_DATA0__UART2_DTE_TX 0x0C8 0x328 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_BIT_STREAM00 0x0C8 0x328 0x4C0 0x4 0x2 +#define MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x0C8 0x328 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 0x0C8 0x328 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SD2_DATA0__OBSERVE_MUX_OUT02 0x0C8 0x328 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x0CC 0x32C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD2_DATA1__I2C4_SCL 0x0CC 0x32C 0x5BC 0x2 0x1 +#define MX8MP_IOMUXC_SD2_DATA1__UART2_DCE_TX 0x0CC 0x32C 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SD2_DATA1__UART2_DTE_RX 0x0CC 0x32C 0x5F0 0x3 0x3 +#define MX8MP_IOMUXC_SD2_DATA1__AUDIOMIX_BIT_STREAM01 0x0CC 0x32C 0x4C4 0x4 0x1 +#define MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x0CC 0x32C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD2_DATA1__CCMSRCGPCMIX_WAIT 0x0CC 0x32C 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SD2_DATA1__OBSERVE_MUX_OUT03 0x0CC 0x32C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x0D0 0x330 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD2_DATA2__ECSPI2_SS0 0x0D0 0x330 0x574 0x2 0x0 +#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_SPDIF_OUT 0x0D0 0x330 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_BIT_STREAM02 0x0D0 0x330 0x4C8 0x4 0x1 +#define MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x0D0 0x330 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD2_DATA2__CCMSRCGPCMIX_STOP 0x0D0 0x330 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SD2_DATA2__OBSERVE_MUX_OUT04 0x0D0 0x330 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x0D4 0x334 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD2_DATA3__ECSPI2_MISO 0x0D4 0x334 0x56C 0x2 0x0 +#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF_IN 0x0D4 0x334 0x544 0x3 0x1 +#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_BIT_STREAM03 0x0D4 0x334 0x4CC 0x4 0x2 +#define MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x0D4 0x334 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET 0x0D4 0x334 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B 0x0D8 0x338 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x0D8 0x338 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET 0x0D8 0x338 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SD2_WP__USDHC2_WP 0x0DC 0x33C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x0DC 0x33C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SD2_WP__CORESIGHT_EVENTI 0x0DC 0x33C 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SD2_WP__SIM_M_HMASTLOCK 0x0DC 0x33C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_ALE__RAWNAND_ALE 0x0E0 0x340 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x0E0 0x340 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_ALE__AUDIOMIX_SAI3_TX_BCLK 0x0E0 0x340 0x4E8 0x2 0x0 +#define MX8MP_IOMUXC_NAND_ALE__MEDIAMIX_ISP_FL_TRIG_0 0x0E0 0x340 0x5D4 0x3 0x1 +#define MX8MP_IOMUXC_NAND_ALE__UART3_DCE_RX 0x0E0 0x340 0x5F8 0x4 0x2 +#define MX8MP_IOMUXC_NAND_ALE__UART3_DTE_TX 0x0E0 0x340 0x000 0x4 0x0 +#define MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x0E0 0x340 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_ALE__CORESIGHT_TRACE_CLK 0x0E0 0x340 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_ALE__SIM_M_HPROT00 0x0E0 0x340 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_CE0_B__RAWNAND_CE0_B 0x0E4 0x344 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x0E4 0x344 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_CE0_B__AUDIOMIX_SAI3_TX_DATA00 0x0E4 0x344 0x000 0x2 0x0 +#define MX8MP_IOMUXC_NAND_CE0_B__MEDIAMIX_ISP_SHUTTER_TRIG_0 0x0E4 0x344 0x5DC 0x3 0x1 +#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DCE_TX 0x0E4 0x344 0x000 0x4 0x0 +#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DTE_RX 0x0E4 0x344 0x5F8 0x4 0x3 +#define MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x0E4 0x344 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_CE0_B__CORESIGHT_TRACE_CTL 0x0E4 0x344 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_CE0_B__SIM_M_HPROT01 0x0E4 0x344 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_CE1_B__RAWNAND_CE1_B 0x0E8 0x348 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_CE1_B__FLEXSPI_A_SS1_B 0x0E8 0x348 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x0E8 0x348 0x630 0x2 0x1 +#define MX8MP_IOMUXC_NAND_CE1_B__I2C4_SCL 0x0E8 0x348 0x5BC 0x4 0x2 +#define MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02 0x0E8 0x348 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_CE1_B__CORESIGHT_TRACE00 0x0E8 0x348 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_CE1_B__SIM_M_HPROT02 0x0E8 0x348 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_CE2_B__RAWNAND_CE2_B 0x0EC 0x34C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_CE2_B__FLEXSPI_B_SS0_B 0x0EC 0x34C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x0EC 0x34C 0x624 0x2 0x1 +#define MX8MP_IOMUXC_NAND_CE2_B__I2C4_SDA 0x0EC 0x34C 0x5C0 0x4 0x2 +#define MX8MP_IOMUXC_NAND_CE2_B__GPIO3_IO03 0x0EC 0x34C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_CE2_B__CORESIGHT_TRACE01 0x0EC 0x34C 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_CE2_B__SIM_M_HPROT03 0x0EC 0x34C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_CE3_B__RAWNAND_CE3_B 0x0F0 0x350 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_CE3_B__FLEXSPI_B_SS1_B 0x0F0 0x350 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x0F0 0x350 0x628 0x2 0x1 +#define MX8MP_IOMUXC_NAND_CE3_B__I2C3_SDA 0x0F0 0x350 0x5B8 0x4 0x1 +#define MX8MP_IOMUXC_NAND_CE3_B__GPIO3_IO04 0x0F0 0x350 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_CE3_B__CORESIGHT_TRACE02 0x0F0 0x350 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_CE3_B__SIM_M_HADDR00 0x0F0 0x350 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_CLE__RAWNAND_CLE 0x0F4 0x354 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_CLE__FLEXSPI_B_SCLK 0x0F4 0x354 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x0F4 0x354 0x62C 0x2 0x1 +#define MX8MP_IOMUXC_NAND_CLE__UART4_DCE_RX 0x0F4 0x354 0x600 0x4 0x2 +#define MX8MP_IOMUXC_NAND_CLE__UART4_DTE_TX 0x0F4 0x354 0x000 0x4 0x0 +#define MX8MP_IOMUXC_NAND_CLE__GPIO3_IO05 0x0F4 0x354 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_CLE__CORESIGHT_TRACE03 0x0F4 0x354 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_CLE__SIM_M_HADDR01 0x0F4 0x354 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_DATA00__RAWNAND_DATA00 0x0F8 0x358 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x0F8 0x358 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_DATA00__AUDIOMIX_SAI3_RX_DATA00 0x0F8 0x358 0x4E4 0x2 0x0 +#define MX8MP_IOMUXC_NAND_DATA00__MEDIAMIX_ISP_FLASH_TRIG_0 0x0F8 0x358 0x000 0x3 0x0 +#define MX8MP_IOMUXC_NAND_DATA00__UART4_DCE_RX 0x0F8 0x358 0x600 0x4 0x3 +#define MX8MP_IOMUXC_NAND_DATA00__UART4_DTE_TX 0x0F8 0x358 0x000 0x4 0x0 +#define MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x0F8 0x358 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_DATA00__CORESIGHT_TRACE04 0x0F8 0x358 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_DATA00__SIM_M_HADDR02 0x0F8 0x358 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_DATA01__RAWNAND_DATA01 0x0FC 0x35C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x0FC 0x35C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_DATA01__AUDIOMIX_SAI3_TX_SYNC 0x0FC 0x35C 0x4EC 0x2 0x0 +#define MX8MP_IOMUXC_NAND_DATA01__MEDIAMIX_ISP_PRELIGHT_TRIG_0 0x0FC 0x35C 0x000 0x3 0x0 +#define MX8MP_IOMUXC_NAND_DATA01__UART4_DCE_TX 0x0FC 0x35C 0x000 0x4 0x0 +#define MX8MP_IOMUXC_NAND_DATA01__UART4_DTE_RX 0x0FC 0x35C 0x600 0x4 0x4 +#define MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x0FC 0x35C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_DATA01__CORESIGHT_TRACE05 0x0FC 0x35C 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_DATA01__SIM_M_HADDR03 0x0FC 0x35C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_DATA02__RAWNAND_DATA02 0x100 0x360 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x100 0x360 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_DATA02__USDHC3_CD_B 0x100 0x360 0x608 0x2 0x2 +#define MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS 0x100 0x360 0x000 0x3 0x0 +#define MX8MP_IOMUXC_NAND_DATA02__UART4_DTE_RTS 0x100 0x360 0x5FC 0x3 0x0 +#define MX8MP_IOMUXC_NAND_DATA02__I2C4_SDA 0x100 0x360 0x5C0 0x4 0x3 +#define MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x100 0x360 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_DATA02__CORESIGHT_TRACE06 0x100 0x360 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_DATA02__SIM_M_HADDR04 0x100 0x360 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_DATA03__RAWNAND_DATA03 0x104 0x364 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x104 0x364 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_DATA03__USDHC3_WP 0x104 0x364 0x634 0x2 0x2 +#define MX8MP_IOMUXC_NAND_DATA03__UART4_DCE_RTS 0x104 0x364 0x5FC 0x3 0x1 +#define MX8MP_IOMUXC_NAND_DATA03__UART4_DTE_CTS 0x104 0x364 0x000 0x3 0x0 +#define MX8MP_IOMUXC_NAND_DATA03__MEDIAMIX_ISP_FL_TRIG_1 0x104 0x364 0x5D8 0x4 0x1 +#define MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x104 0x364 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_DATA03__CORESIGHT_TRACE07 0x104 0x364 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_DATA03__SIM_M_HADDR05 0x104 0x364 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_DATA04__RAWNAND_DATA04 0x108 0x368 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_B_DATA00 0x108 0x368 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x108 0x368 0x610 0x2 0x1 +#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_A_DATA04 0x108 0x368 0x000 0x3 0x0 +#define MX8MP_IOMUXC_NAND_DATA04__MEDIAMIX_ISP_SHUTTER_TRIG_1 0x108 0x368 0x5E0 0x4 0x1 +#define MX8MP_IOMUXC_NAND_DATA04__GPIO3_IO10 0x108 0x368 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_DATA04__CORESIGHT_TRACE08 0x108 0x368 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_DATA04__SIM_M_HADDR06 0x108 0x368 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_DATA05__RAWNAND_DATA05 0x10C 0x36C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_B_DATA01 0x10C 0x36C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x10C 0x36C 0x614 0x2 0x1 +#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_A_DATA05 0x10C 0x36C 0x000 0x3 0x0 +#define MX8MP_IOMUXC_NAND_DATA05__MEDIAMIX_ISP_FLASH_TRIG_1 0x10C 0x36C 0x000 0x4 0x0 +#define MX8MP_IOMUXC_NAND_DATA05__GPIO3_IO11 0x10C 0x36C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_DATA05__CORESIGHT_TRACE09 0x10C 0x36C 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_DATA05__SIM_M_HADDR07 0x10C 0x36C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_DATA06__RAWNAND_DATA06 0x110 0x370 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_B_DATA02 0x110 0x370 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x110 0x370 0x618 0x2 0x1 +#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_A_DATA06 0x110 0x370 0x000 0x3 0x0 +#define MX8MP_IOMUXC_NAND_DATA06__MEDIAMIX_ISP_PRELIGHT_TRIG_1 0x110 0x370 0x000 0x4 0x0 +#define MX8MP_IOMUXC_NAND_DATA06__GPIO3_IO12 0x110 0x370 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_DATA06__CORESIGHT_TRACE10 0x110 0x370 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_DATA06__SIM_M_HADDR08 0x110 0x370 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_DATA07__RAWNAND_DATA07 0x114 0x374 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_B_DATA03 0x114 0x374 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x114 0x374 0x61C 0x2 0x1 +#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_A_DATA07 0x114 0x374 0x000 0x3 0x0 +#define MX8MP_IOMUXC_NAND_DATA07__MEDIAMIX_ISP_SHUTTER_OPEN_1 0x114 0x374 0x000 0x4 0x0 +#define MX8MP_IOMUXC_NAND_DATA07__GPIO3_IO13 0x114 0x374 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_DATA07__CORESIGHT_TRACE11 0x114 0x374 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_DATA07__SIM_M_HADDR09 0x114 0x374 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_DQS__RAWNAND_DQS 0x118 0x378 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS 0x118 0x378 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_DQS__AUDIOMIX_SAI3_MCLK 0x118 0x378 0x4E0 0x2 0x0 +#define MX8MP_IOMUXC_NAND_DQS__MEDIAMIX_ISP_SHUTTER_OPEN_0 0x118 0x378 0x000 0x3 0x0 +#define MX8MP_IOMUXC_NAND_DQS__I2C3_SCL 0x118 0x378 0x5B4 0x4 0x1 +#define MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x118 0x378 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_DQS__CORESIGHT_TRACE12 0x118 0x378 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_DQS__SIM_M_HADDR10 0x118 0x378 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_RE_B__RAWNAND_RE_B 0x11C 0x37C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_RE_B__FLEXSPI_B_DQS 0x11C 0x37C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x11C 0x37C 0x620 0x2 0x1 +#define MX8MP_IOMUXC_NAND_RE_B__UART4_DCE_TX 0x11C 0x37C 0x000 0x4 0x0 +#define MX8MP_IOMUXC_NAND_RE_B__UART4_DTE_RX 0x11C 0x37C 0x600 0x4 0x5 +#define MX8MP_IOMUXC_NAND_RE_B__GPIO3_IO15 0x11C 0x37C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_RE_B__CORESIGHT_TRACE13 0x11C 0x37C 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_RE_B__SIM_M_HADDR11 0x11C 0x37C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_READY_B__RAWNAND_READY_B 0x120 0x380 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x120 0x380 0x000 0x2 0x0 +#define MX8MP_IOMUXC_NAND_READY_B__I2C3_SCL 0x120 0x380 0x5B4 0x4 0x2 +#define MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x120 0x380 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_READY_B__CORESIGHT_TRACE14 0x120 0x380 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_READY_B__SIM_M_HADDR12 0x120 0x380 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_WE_B__RAWNAND_WE_B 0x124 0x384 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x124 0x384 0x604 0x2 0x1 +#define MX8MP_IOMUXC_NAND_WE_B__I2C3_SDA 0x124 0x384 0x5B8 0x4 0x2 +#define MX8MP_IOMUXC_NAND_WE_B__GPIO3_IO17 0x124 0x384 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_WE_B__CORESIGHT_TRACE15 0x124 0x384 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_WE_B__SIM_M_HADDR13 0x124 0x384 0x000 0x7 0x0 +#define MX8MP_IOMUXC_NAND_WP_B__RAWNAND_WP_B 0x128 0x388 0x000 0x0 0x0 +#define MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x128 0x388 0x60C 0x2 0x1 +#define MX8MP_IOMUXC_NAND_WP_B__I2C4_SCL 0x128 0x388 0x5BC 0x4 0x3 +#define MX8MP_IOMUXC_NAND_WP_B__GPIO3_IO18 0x128 0x388 0x000 0x5 0x0 +#define MX8MP_IOMUXC_NAND_WP_B__CORESIGHT_EVENTO 0x128 0x388 0x000 0x6 0x0 +#define MX8MP_IOMUXC_NAND_WP_B__SIM_M_HADDR14 0x128 0x388 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI5_RX_SYNC 0x12C 0x38C 0x508 0x0 0x0 +#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00 0x12C 0x38C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT 0x12C 0x38C 0x000 0x2 0x0 +#define MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL 0x12C 0x38C 0x5CC 0x3 0x1 +#define MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x12C 0x38C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI5_RX_BCLK 0x130 0x390 0x4F4 0x0 0x0 +#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI1_TX_DATA01 0x130 0x390 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT 0x130 0x390 0x000 0x2 0x0 +#define MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x130 0x390 0x5D0 0x3 0x1 +#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_CLK 0x130 0x390 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x130 0x390 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI5_RX_DATA00 0x134 0x394 0x4F8 0x0 0x0 +#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02 0x134 0x394 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x134 0x394 0x000 0x2 0x0 +#define MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL 0x134 0x394 0x5C4 0x3 0x1 +#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_BIT_STREAM00 0x134 0x394 0x4C0 0x4 0x3 +#define MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x134 0x394 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01 0x138 0x398 0x4FC 0x0 0x0 +#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03 0x138 0x398 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC 0x138 0x398 0x4D8 0x2 0x0 +#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC 0x138 0x398 0x510 0x3 0x0 +#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_BIT_STREAM01 0x138 0x398 0x4C4 0x4 0x3 +#define MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x138 0x398 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x138 0x398 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02 0x13C 0x39C 0x500 0x0 0x0 +#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04 0x13C 0x39C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC 0x13C 0x39C 0x4D8 0x2 0x1 +#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK 0x13C 0x39C 0x50C 0x3 0x0 +#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_BIT_STREAM02 0x13C 0x39C 0x4C8 0x4 0x3 +#define MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x13C 0x39C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x13C 0x39C 0x54C 0x6 0x0 +#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03 0x140 0x3A0 0x504 0x0 0x0 +#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05 0x140 0x3A0 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC 0x140 0x3A0 0x4D8 0x2 0x2 +#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00 0x140 0x3A0 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_BIT_STREAM03 0x140 0x3A0 0x4CC 0x4 0x3 +#define MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x140 0x3A0 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x140 0x3A0 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK 0x144 0x3A4 0x4F0 0x0 0x0 +#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK 0x144 0x3A4 0x4D4 0x1 0x0 +#define MX8MP_IOMUXC_SAI5_MCLK__PWM1_OUT 0x144 0x3A4 0x000 0x2 0x0 +#define MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA 0x144 0x3A4 0x5C8 0x3 0x1 +#define MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 0x144 0x3A4 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x144 0x3A4 0x550 0x6 0x0 +#define MX8MP_IOMUXC_SAI1_RXFS__AUDIOMIX_SAI1_RX_SYNC 0x148 0x3A8 0x4D0 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_RXFS__AUDIOMIX_SAI5_RX_SYNC 0x148 0x3A8 0x508 0x1 0x1 +#define MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x148 0x3A8 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x148 0x3A8 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_SAI1_RX_BCLK 0x14C 0x3AC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_SAI5_RX_BCLK 0x14C 0x3AC 0x4F4 0x1 0x1 +#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_CLK 0x14C 0x3AC 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x14C 0x3AC 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x14C 0x3AC 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00 0x150 0x3B0 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI5_RX_DATA00 0x150 0x3B0 0x4F8 0x1 0x1 +#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01 0x150 0x3B0 0x000 0x2 0x0 +#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_BIT_STREAM00 0x150 0x3B0 0x4C0 0x3 0x4 +#define MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x150 0x3B0 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x150 0x3B0 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01 0x154 0x3B4 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI5_RX_DATA01 0x154 0x3B4 0x4FC 0x1 0x1 +#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_BIT_STREAM01 0x154 0x3B4 0x4C4 0x3 0x4 +#define MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT 0x154 0x3B4 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x154 0x3B4 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02 0x158 0x3B8 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI5_RX_DATA02 0x158 0x3B8 0x500 0x1 0x1 +#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_BIT_STREAM02 0x158 0x3B8 0x4C8 0x3 0x4 +#define MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x158 0x3B8 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04 0x158 0x3B8 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03 0x15C 0x3BC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI5_RX_DATA03 0x15C 0x3BC 0x504 0x1 0x1 +#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_BIT_STREAM03 0x15C 0x3BC 0x4CC 0x3 0x4 +#define MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x15C 0x3BC 0x57C 0x4 0x1 +#define MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x15C 0x3BC 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04 0x160 0x3C0 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK 0x160 0x3C0 0x524 0x1 0x1 +#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_RX_BCLK 0x160 0x3C0 0x518 0x2 0x1 +#define MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x160 0x3C0 0x580 0x4 0x1 +#define MX8MP_IOMUXC_SAI1_RXD4__GPIO4_IO06 0x160 0x3C0 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI1_RX_DATA05 0x164 0x3C4 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_TX_DATA00 0x164 0x3C4 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00 0x164 0x3C4 0x51C 0x2 0x1 +#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI1_RX_SYNC 0x164 0x3C4 0x4D0 0x3 0x1 +#define MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x164 0x3C4 0x584 0x4 0x1 +#define MX8MP_IOMUXC_SAI1_RXD5__GPIO4_IO07 0x164 0x3C4 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI1_RX_DATA06 0x168 0x3C8 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI6_TX_SYNC 0x168 0x3C8 0x528 0x1 0x1 +#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI6_RX_SYNC 0x168 0x3C8 0x520 0x2 0x1 +#define MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x168 0x3C8 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08 0x168 0x3C8 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_RX_DATA07 0x16C 0x3CC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI6_MCLK 0x16C 0x3CC 0x514 0x1 0x1 +#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_TX_SYNC 0x16C 0x3CC 0x4D8 0x2 0x3 +#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_TX_DATA04 0x16C 0x3CC 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x16C 0x3CC 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09 0x16C 0x3CC 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_TXFS__AUDIOMIX_SAI1_TX_SYNC 0x170 0x3D0 0x4D8 0x0 0x4 +#define MX8MP_IOMUXC_SAI1_TXFS__AUDIOMIX_SAI5_TX_SYNC 0x170 0x3D0 0x510 0x1 0x1 +#define MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x170 0x3D0 0x588 0x4 0x1 +#define MX8MP_IOMUXC_SAI1_TXFS__GPIO4_IO10 0x170 0x3D0 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_TXC__AUDIOMIX_SAI1_TX_BCLK 0x174 0x3D4 0x4D4 0x0 0x1 +#define MX8MP_IOMUXC_SAI1_TXC__AUDIOMIX_SAI5_TX_BCLK 0x174 0x3D4 0x50C 0x1 0x1 +#define MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x174 0x3D4 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11 0x174 0x3D4 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_TXD0__AUDIOMIX_SAI1_TX_DATA00 0x178 0x3D8 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_TXD0__AUDIOMIX_SAI5_TX_DATA00 0x178 0x3D8 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x178 0x3D8 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x178 0x3D8 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_TXD1__AUDIOMIX_SAI1_TX_DATA01 0x17C 0x3DC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_TXD1__AUDIOMIX_SAI5_TX_DATA01 0x17C 0x3DC 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x17C 0x3DC 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_TXD1__GPIO4_IO13 0x17C 0x3DC 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_TXD2__AUDIOMIX_SAI1_TX_DATA02 0x180 0x3E0 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_TXD2__AUDIOMIX_SAI5_TX_DATA02 0x180 0x3E0 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x180 0x3E0 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 0x180 0x3E0 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_TXD3__AUDIOMIX_SAI1_TX_DATA03 0x184 0x3E4 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_TXD3__AUDIOMIX_SAI5_TX_DATA03 0x184 0x3E4 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x184 0x3E4 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_TXD3__GPIO4_IO15 0x184 0x3E4 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI1_TX_DATA04 0x188 0x3E8 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI6_RX_BCLK 0x188 0x3E8 0x518 0x1 0x2 +#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI6_TX_BCLK 0x188 0x3E8 0x524 0x2 0x2 +#define MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x188 0x3E8 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16 0x188 0x3E8 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI1_TX_DATA05 0x18C 0x3EC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_RX_DATA00 0x18C 0x3EC 0x51C 0x1 0x2 +#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00 0x18C 0x3EC 0x000 0x2 0x0 +#define MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x18C 0x3EC 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17 0x18C 0x3EC 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI1_TX_DATA06 0x190 0x3F0 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_RX_SYNC 0x190 0x3F0 0x520 0x1 0x2 +#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC 0x190 0x3F0 0x528 0x2 0x2 +#define MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER 0x190 0x3F0 0x58C 0x4 0x1 +#define MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x190 0x3F0 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI1_TX_DATA07 0x194 0x3F4 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK 0x194 0x3F4 0x514 0x1 0x2 +#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_CLK 0x194 0x3F4 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SAI1_TXD7__ENET1_TX_ER 0x194 0x3F4 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x194 0x3F4 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK 0x198 0x3F8 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI5_MCLK 0x198 0x3F8 0x4F0 0x1 0x1 +#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_TX_BCLK 0x198 0x3F8 0x4D4 0x2 0x2 +#define MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x198 0x3F8 0x578 0x4 0x1 +#define MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x198 0x3F8 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_SYNC 0x19C 0x3FC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI5_TX_SYNC 0x19C 0x3FC 0x510 0x1 0x2 +#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI5_TX_DATA01 0x19C 0x3FC 0x000 0x2 0x0 +#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_DATA01 0x19C 0x3FC 0x4DC 0x3 0x0 +#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x19C 0x3FC 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DTE_RX 0x19C 0x3FC 0x5E8 0x4 0x2 +#define MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x19C 0x3FC 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_BIT_STREAM02 0x19C 0x3FC 0x4C8 0x6 0x5 +#define MX8MP_IOMUXC_SAI2_RXFS__SIM_M_HSIZE00 0x19C 0x3FC 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK 0x1A0 0x400 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK 0x1A0 0x400 0x50C 0x1 0x2 +#define MX8MP_IOMUXC_SAI2_RXC__CAN1_TX 0x1A0 0x400 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x1A0 0x400 0x5E8 0x4 0x3 +#define MX8MP_IOMUXC_SAI2_RXC__UART1_DTE_TX 0x1A0 0x400 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x1A0 0x400 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_BIT_STREAM01 0x1A0 0x400 0x4C4 0x6 0x5 +#define MX8MP_IOMUXC_SAI2_RXC__SIM_M_HSIZE01 0x1A0 0x400 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0x1A4 0x404 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00 0x1A4 0x404 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT 0x1A4 0x404 0x000 0x2 0x0 +#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_TX_DATA01 0x1A4 0x404 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x1A4 0x404 0x5E4 0x4 0x2 +#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS 0x1A4 0x404 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x1A4 0x404 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_BIT_STREAM03 0x1A4 0x404 0x4CC 0x6 0x5 +#define MX8MP_IOMUXC_SAI2_RXD0__SIM_M_HSIZE02 0x1A4 0x404 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0x1A8 0x408 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01 0x1A8 0x408 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI2_TXFS__ENET_QOS_1588_EVENT3_OUT 0x1A8 0x408 0x000 0x2 0x0 +#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_DATA01 0x1A8 0x408 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x1A8 0x408 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS 0x1A8 0x408 0x5E4 0x4 0x3 +#define MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x1A8 0x408 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_BIT_STREAM02 0x1A8 0x408 0x4C8 0x6 0x6 +#define MX8MP_IOMUXC_SAI2_TXFS__SIM_M_HWRITE 0x1A8 0x408 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0x1AC 0x40C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02 0x1AC 0x40C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI2_TXC__CAN1_RX 0x1AC 0x40C 0x54C 0x3 0x1 +#define MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x1AC 0x40C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_BIT_STREAM01 0x1AC 0x40C 0x4C4 0x6 0x6 +#define MX8MP_IOMUXC_SAI2_TXC__SIM_M_HREADYOUT 0x1AC 0x40C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0x1B0 0x410 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03 0x1B0 0x410 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN 0x1B0 0x410 0x000 0x2 0x0 +#define MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX 0x1B0 0x410 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_AUX_IN 0x1B0 0x410 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x1B0 0x410 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI2_TXD0__CCMSRCGPCMIX_BOOT_MODE04 0x1B0 0x410 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SAI2_TXD0__TPSMP_CLK 0x1B0 0x410 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0x1B4 0x414 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI5_MCLK 0x1B4 0x414 0x4F0 0x1 0x2 +#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_IN 0x1B4 0x414 0x000 0x2 0x0 +#define MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX 0x1B4 0x414 0x550 0x3 0x1 +#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_AUX_IN 0x1B4 0x414 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x1B4 0x414 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI3_MCLK 0x1B4 0x414 0x4E0 0x6 0x1 +#define MX8MP_IOMUXC_SAI2_MCLK__TPSMP_HDATA_DIR 0x1B4 0x414 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_SYNC 0x1B8 0x418 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI2_RX_DATA01 0x1B8 0x418 0x4DC 0x1 0x1 +#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI5_RX_SYNC 0x1B8 0x418 0x508 0x2 0x2 +#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01 0x1B8 0x418 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF_IN 0x1B8 0x418 0x544 0x4 0x2 +#define MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x1B8 0x418 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_BIT_STREAM00 0x1B8 0x418 0x4C0 0x6 0x5 +#define MX8MP_IOMUXC_SAI3_RXFS__TPSMP_HTRANS00 0x1B8 0x418 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK 0x1BC 0x41C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02 0x1BC 0x41C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI5_RX_BCLK 0x1BC 0x41C 0x4F4 0x2 0x2 +#define MX8MP_IOMUXC_SAI3_RXC__GPT1_CLK 0x1BC 0x41C 0x59C 0x3 0x0 +#define MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS 0x1BC 0x41C 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI3_RXC__UART2_DTE_RTS 0x1BC 0x41C 0x5EC 0x4 0x2 +#define MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x1BC 0x41C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_CLK 0x1BC 0x41C 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SAI3_RXC__TPSMP_HTRANS01 0x1BC 0x41C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0x1C0 0x420 0x4E4 0x0 0x1 +#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI2_RX_DATA03 0x1C0 0x420 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI5_RX_DATA00 0x1C0 0x420 0x4F8 0x2 0x2 +#define MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS 0x1C0 0x420 0x5EC 0x4 0x3 +#define MX8MP_IOMUXC_SAI3_RXD__UART2_DTE_CTS 0x1C0 0x420 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x1C0 0x420 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_BIT_STREAM01 0x1C0 0x420 0x4C4 0x6 0x7 +#define MX8MP_IOMUXC_SAI3_RXD__TPSMP_HDATA00 0x1C0 0x420 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0x1C4 0x424 0x4EC 0x0 0x1 +#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01 0x1C4 0x424 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI5_RX_DATA01 0x1C4 0x424 0x4FC 0x2 0x2 +#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_DATA01 0x1C4 0x424 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX 0x1C4 0x424 0x5F0 0x4 0x4 +#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX 0x1C4 0x424 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x1C4 0x424 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_BIT_STREAM03 0x1C4 0x424 0x4CC 0x6 0x6 +#define MX8MP_IOMUXC_SAI3_TXFS__TPSMP_HDATA01 0x1C4 0x424 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0x1C8 0x428 0x4E8 0x0 0x1 +#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02 0x1C8 0x428 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI5_RX_DATA02 0x1C8 0x428 0x500 0x2 0x2 +#define MX8MP_IOMUXC_SAI3_TXC__GPT1_CAPTURE1 0x1C8 0x428 0x594 0x3 0x0 +#define MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX 0x1C8 0x428 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX 0x1C8 0x428 0x5F0 0x4 0x5 +#define MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x1C8 0x428 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_BIT_STREAM02 0x1C8 0x428 0x4C8 0x6 0x7 +#define MX8MP_IOMUXC_SAI3_TXC__TPSMP_HDATA02 0x1C8 0x428 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0x1CC 0x42C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03 0x1CC 0x42C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI5_RX_DATA03 0x1CC 0x42C 0x504 0x2 0x2 +#define MX8MP_IOMUXC_SAI3_TXD__GPT1_CAPTURE2 0x1CC 0x42C 0x598 0x3 0x0 +#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SPDIF_EXT_CLK 0x1CC 0x42C 0x548 0x4 0x0 +#define MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x1CC 0x42C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI3_TXD__CCMSRCGPCMIX_BOOT_MODE05 0x1CC 0x42C 0x000 0x6 0x0 +#define MX8MP_IOMUXC_SAI3_TXD__TPSMP_HDATA03 0x1CC 0x42C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0x1D0 0x430 0x4E0 0x0 0x2 +#define MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT 0x1D0 0x430 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI5_MCLK 0x1D0 0x430 0x4F0 0x2 0x3 +#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF_OUT 0x1D0 0x430 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x1D0 0x430 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF_IN 0x1D0 0x430 0x544 0x6 0x3 +#define MX8MP_IOMUXC_SAI3_MCLK__TPSMP_HDATA04 0x1D0 0x430 0x000 0x7 0x0 +#define MX8MP_IOMUXC_SPDIF_TX__AUDIOMIX_SPDIF_OUT 0x1D4 0x434 0x000 0x0 0x0 +#define MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT 0x1D4 0x434 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x1D4 0x434 0x5C4 0x2 0x2 +#define MX8MP_IOMUXC_SPDIF_TX__GPT1_COMPARE1 0x1D4 0x434 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x1D4 0x434 0x000 0x4 0x0 +#define MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03 0x1D4 0x434 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SPDIF_RX__AUDIOMIX_SPDIF_IN 0x1D8 0x438 0x544 0x0 0x4 +#define MX8MP_IOMUXC_SPDIF_RX__PWM2_OUT 0x1D8 0x438 0x000 0x1 0x0 +#define MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x1D8 0x438 0x5C8 0x2 0x2 +#define MX8MP_IOMUXC_SPDIF_RX__GPT1_COMPARE2 0x1D8 0x438 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x1D8 0x438 0x54C 0x4 0x2 +#define MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x1D8 0x438 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPT1_COMPARE3 0x1DC 0x43C 0x000 0x3 0x0 +#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x1DC 0x43C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_SPDIF_EXT_CLK__AUDIOMIX_SPDIF_EXT_CLK 0x1DC 0x43C 0x548 0x0 0x1 +#define MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x1DC 0x43C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x1E0 0x440 0x558 0x0 0x0 +#define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x1E0 0x440 0x5F8 0x1 0x4 +#define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DTE_TX 0x1E0 0x440 0x000 0x1 0x0 +#define MX8MP_IOMUXC_ECSPI1_SCLK__I2C1_SCL 0x1E0 0x440 0x5A4 0x2 0x1 +#define MX8MP_IOMUXC_ECSPI1_SCLK__AUDIOMIX_SAI7_RX_SYNC 0x1E0 0x440 0x538 0x3 0x1 +#define MX8MP_IOMUXC_ECSPI1_SCLK__GPIO5_IO06 0x1E0 0x440 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ECSPI1_SCLK__TPSMP_HDATA08 0x1E0 0x440 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x1E4 0x444 0x560 0x0 0x0 +#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x1E4 0x444 0x000 0x1 0x0 +#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DTE_RX 0x1E4 0x444 0x5F8 0x1 0x5 +#define MX8MP_IOMUXC_ECSPI1_MOSI__I2C1_SDA 0x1E4 0x444 0x5A8 0x2 0x1 +#define MX8MP_IOMUXC_ECSPI1_MOSI__AUDIOMIX_SAI7_RX_BCLK 0x1E4 0x444 0x530 0x3 0x1 +#define MX8MP_IOMUXC_ECSPI1_MOSI__GPIO5_IO07 0x1E4 0x444 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ECSPI1_MOSI__TPSMP_HDATA09 0x1E4 0x444 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x1E8 0x448 0x55C 0x0 0x0 +#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS 0x1E8 0x448 0x000 0x1 0x0 +#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DTE_RTS 0x1E8 0x448 0x5F4 0x1 0x2 +#define MX8MP_IOMUXC_ECSPI1_MISO__I2C2_SCL 0x1E8 0x448 0x5AC 0x2 0x1 +#define MX8MP_IOMUXC_ECSPI1_MISO__AUDIOMIX_SAI7_RX_DATA00 0x1E8 0x448 0x534 0x3 0x1 +#define MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08 0x1E8 0x448 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ECSPI1_MISO__TPSMP_HDATA10 0x1E8 0x448 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0 0x1EC 0x44C 0x564 0x0 0x0 +#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS 0x1EC 0x44C 0x5F4 0x1 0x3 +#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DTE_CTS 0x1EC 0x44C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_ECSPI1_SS0__I2C2_SDA 0x1EC 0x44C 0x5B0 0x2 0x1 +#define MX8MP_IOMUXC_ECSPI1_SS0__AUDIOMIX_SAI7_TX_SYNC 0x1EC 0x44C 0x540 0x3 0x1 +#define MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x1EC 0x44C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ECSPI1_SS0__TPSMP_HDATA11 0x1EC 0x44C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x1F0 0x450 0x568 0x0 0x1 +#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX 0x1F0 0x450 0x600 0x1 0x6 +#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DTE_TX 0x1F0 0x450 0x000 0x1 0x0 +#define MX8MP_IOMUXC_ECSPI2_SCLK__I2C3_SCL 0x1F0 0x450 0x5B4 0x2 0x3 +#define MX8MP_IOMUXC_ECSPI2_SCLK__AUDIOMIX_SAI7_TX_BCLK 0x1F0 0x450 0x53C 0x3 0x1 +#define MX8MP_IOMUXC_ECSPI2_SCLK__GPIO5_IO10 0x1F0 0x450 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ECSPI2_SCLK__TPSMP_HDATA12 0x1F0 0x450 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x1F4 0x454 0x570 0x0 0x1 +#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX 0x1F4 0x454 0x000 0x1 0x0 +#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DTE_RX 0x1F4 0x454 0x600 0x1 0x7 +#define MX8MP_IOMUXC_ECSPI2_MOSI__I2C3_SDA 0x1F4 0x454 0x5B8 0x2 0x3 +#define MX8MP_IOMUXC_ECSPI2_MOSI__AUDIOMIX_SAI7_TX_DATA00 0x1F4 0x454 0x000 0x3 0x0 +#define MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11 0x1F4 0x454 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ECSPI2_MOSI__TPSMP_HDATA13 0x1F4 0x454 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12 0x1F8 0x458 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ECSPI2_MISO__TPSMP_HDATA14 0x1F8 0x458 0x000 0x7 0x0 +#define MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x1F8 0x458 0x56C 0x0 0x1 +#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS 0x1F8 0x458 0x000 0x1 0x0 +#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DTE_RTS 0x1F8 0x458 0x5FC 0x1 0x2 +#define MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL 0x1F8 0x458 0x5BC 0x2 0x4 +#define MX8MP_IOMUXC_ECSPI2_MISO__AUDIOMIX_SAI7_MCLK 0x1F8 0x458 0x52C 0x3 0x1 +#define MX8MP_IOMUXC_ECSPI2_MISO__CCMSRCGPCMIX_CLKO1 0x1F8 0x458 0x000 0x4 0x0 +#define MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0 0x1FC 0x45C 0x574 0x0 0x1 +#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS 0x1FC 0x45C 0x5FC 0x1 0x3 +#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DTE_CTS 0x1FC 0x45C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA 0x1FC 0x45C 0x5C0 0x2 0x4 +#define MX8MP_IOMUXC_ECSPI2_SS0__CCMSRCGPCMIX_CLKO2 0x1FC 0x45C 0x000 0x4 0x0 +#define MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x1FC 0x45C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_ECSPI2_SS0__TPSMP_HDATA15 0x1FC 0x45C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x200 0x460 0x5A4 0x0 0x2 +#define MX8MP_IOMUXC_I2C1_SCL__ENET_QOS_MDC 0x200 0x460 0x000 0x1 0x0 +#define MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK 0x200 0x460 0x558 0x3 0x1 +#define MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x200 0x460 0x000 0x5 0x0 +#define MX8MP_IOMUXC_I2C1_SCL__TPSMP_HDATA16 0x200 0x460 0x000 0x7 0x0 +#define MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x204 0x464 0x5A8 0x0 0x2 +#define MX8MP_IOMUXC_I2C1_SDA__ENET_QOS_MDIO 0x204 0x464 0x590 0x1 0x2 +#define MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI 0x204 0x464 0x560 0x3 0x1 +#define MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x204 0x464 0x000 0x5 0x0 +#define MX8MP_IOMUXC_I2C1_SDA__TPSMP_HDATA17 0x204 0x464 0x000 0x7 0x0 +#define MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x208 0x468 0x5AC 0x0 0x2 +#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_IN 0x208 0x468 0x000 0x1 0x0 +#define MX8MP_IOMUXC_I2C2_SCL__USDHC3_CD_B 0x208 0x468 0x608 0x2 0x3 +#define MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO 0x208 0x468 0x55C 0x3 0x1 +#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_AUX_IN 0x208 0x468 0x000 0x4 0x0 +#define MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x208 0x468 0x000 0x5 0x0 +#define MX8MP_IOMUXC_I2C2_SCL__TPSMP_HDATA18 0x208 0x468 0x000 0x7 0x0 +#define MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x20C 0x46C 0x5B0 0x0 0x2 +#define MX8MP_IOMUXC_I2C2_SDA__ENET_QOS_1588_EVENT1_OUT 0x20C 0x46C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_I2C2_SDA__USDHC3_WP 0x20C 0x46C 0x634 0x2 0x3 +#define MX8MP_IOMUXC_I2C2_SDA__ECSPI1_SS0 0x20C 0x46C 0x564 0x3 0x1 +#define MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x20C 0x46C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_I2C2_SDA__TPSMP_HDATA19 0x20C 0x46C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x210 0x470 0x5B4 0x0 0x4 +#define MX8MP_IOMUXC_I2C3_SCL__PWM4_OUT 0x210 0x470 0x000 0x1 0x0 +#define MX8MP_IOMUXC_I2C3_SCL__GPT2_CLK 0x210 0x470 0x000 0x2 0x0 +#define MX8MP_IOMUXC_I2C3_SCL__ECSPI2_SCLK 0x210 0x470 0x568 0x3 0x2 +#define MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x210 0x470 0x000 0x5 0x0 +#define MX8MP_IOMUXC_I2C3_SCL__TPSMP_HDATA20 0x210 0x470 0x000 0x7 0x0 +#define MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x214 0x474 0x5B8 0x0 0x4 +#define MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT 0x214 0x474 0x000 0x1 0x0 +#define MX8MP_IOMUXC_I2C3_SDA__GPT3_CLK 0x214 0x474 0x000 0x2 0x0 +#define MX8MP_IOMUXC_I2C3_SDA__ECSPI2_MOSI 0x214 0x474 0x570 0x3 0x2 +#define MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x214 0x474 0x000 0x5 0x0 +#define MX8MP_IOMUXC_I2C3_SDA__TPSMP_HDATA21 0x214 0x474 0x000 0x7 0x0 +#define MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x218 0x478 0x5BC 0x0 0x5 +#define MX8MP_IOMUXC_I2C4_SCL__PWM2_OUT 0x218 0x478 0x000 0x1 0x0 +#define MX8MP_IOMUXC_I2C4_SCL__HSIOMIX_PCIE_CLKREQ_B 0x218 0x478 0x5A0 0x2 0x0 +#define MX8MP_IOMUXC_I2C4_SCL__ECSPI2_MISO 0x218 0x478 0x56C 0x3 0x2 +#define MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x218 0x478 0x000 0x5 0x0 +#define MX8MP_IOMUXC_I2C4_SCL__TPSMP_HDATA22 0x218 0x478 0x000 0x7 0x0 +#define MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x21C 0x47C 0x5C0 0x0 0x5 +#define MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT 0x21C 0x47C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_I2C4_SDA__ECSPI2_SS0 0x21C 0x47C 0x574 0x3 0x2 +#define MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x21C 0x47C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_I2C4_SDA__TPSMP_HDATA23 0x21C 0x47C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x220 0x480 0x5E8 0x0 0x4 +#define MX8MP_IOMUXC_UART1_RXD__UART1_DTE_TX 0x220 0x480 0x000 0x0 0x0 +#define MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x220 0x480 0x000 0x1 0x0 +#define MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22 0x220 0x480 0x000 0x5 0x0 +#define MX8MP_IOMUXC_UART1_RXD__TPSMP_HDATA24 0x220 0x480 0x000 0x7 0x0 +#define MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x224 0x484 0x000 0x0 0x0 +#define MX8MP_IOMUXC_UART1_TXD__UART1_DTE_RX 0x224 0x484 0x5E8 0x0 0x5 +#define MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x224 0x484 0x000 0x1 0x0 +#define MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0x224 0x484 0x000 0x5 0x0 +#define MX8MP_IOMUXC_UART1_TXD__TPSMP_HDATA25 0x224 0x484 0x000 0x7 0x0 +#define MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x228 0x488 0x5F0 0x0 0x6 +#define MX8MP_IOMUXC_UART2_RXD__UART2_DTE_TX 0x228 0x488 0x000 0x0 0x0 +#define MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x228 0x488 0x000 0x1 0x0 +#define MX8MP_IOMUXC_UART2_RXD__GPT1_COMPARE3 0x228 0x488 0x000 0x3 0x0 +#define MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24 0x228 0x488 0x000 0x5 0x0 +#define MX8MP_IOMUXC_UART2_RXD__TPSMP_HDATA26 0x228 0x488 0x000 0x7 0x0 +#define MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x22C 0x48C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_UART2_TXD__UART2_DTE_RX 0x22C 0x48C 0x5F0 0x0 0x7 +#define MX8MP_IOMUXC_UART2_TXD__ECSPI3_SS0 0x22C 0x48C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_UART2_TXD__GPT1_COMPARE2 0x22C 0x48C 0x000 0x3 0x0 +#define MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x22C 0x48C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_UART2_TXD__TPSMP_HDATA27 0x22C 0x48C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x230 0x490 0x5F8 0x0 0x6 +#define MX8MP_IOMUXC_UART3_RXD__UART3_DTE_TX 0x230 0x490 0x000 0x0 0x0 +#define MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS 0x230 0x490 0x000 0x1 0x0 +#define MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS 0x230 0x490 0x5E4 0x1 0x4 +#define MX8MP_IOMUXC_UART3_RXD__USDHC3_RESET_B 0x230 0x490 0x000 0x2 0x0 +#define MX8MP_IOMUXC_UART3_RXD__GPT1_CAPTURE2 0x230 0x490 0x598 0x3 0x1 +#define MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x230 0x490 0x000 0x4 0x0 +#define MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26 0x230 0x490 0x000 0x5 0x0 +#define MX8MP_IOMUXC_UART3_RXD__TPSMP_HDATA28 0x230 0x490 0x000 0x7 0x0 +#define MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x234 0x494 0x000 0x0 0x0 +#define MX8MP_IOMUXC_UART3_TXD__UART3_DTE_RX 0x234 0x494 0x5F8 0x0 0x7 +#define MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS 0x234 0x494 0x5E4 0x1 0x5 +#define MX8MP_IOMUXC_UART3_TXD__UART1_DTE_CTS 0x234 0x494 0x000 0x1 0x0 +#define MX8MP_IOMUXC_UART3_TXD__USDHC3_VSELECT 0x234 0x494 0x000 0x2 0x0 +#define MX8MP_IOMUXC_UART3_TXD__GPT1_CLK 0x234 0x494 0x59C 0x3 0x1 +#define MX8MP_IOMUXC_UART3_TXD__CAN2_RX 0x234 0x494 0x550 0x4 0x2 +#define MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27 0x234 0x494 0x000 0x5 0x0 +#define MX8MP_IOMUXC_UART3_TXD__TPSMP_HDATA29 0x234 0x494 0x000 0x7 0x0 +#define MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x238 0x498 0x600 0x0 0x8 +#define MX8MP_IOMUXC_UART4_RXD__UART4_DTE_TX 0x238 0x498 0x000 0x0 0x0 +#define MX8MP_IOMUXC_UART4_RXD__UART2_DCE_CTS 0x238 0x498 0x000 0x1 0x0 +#define MX8MP_IOMUXC_UART4_RXD__UART2_DTE_RTS 0x238 0x498 0x5EC 0x1 0x4 +#define MX8MP_IOMUXC_UART4_RXD__HSIOMIX_PCIE_CLKREQ_B 0x238 0x498 0x5A0 0x2 0x1 +#define MX8MP_IOMUXC_UART4_RXD__GPT1_COMPARE1 0x238 0x498 0x000 0x3 0x0 +#define MX8MP_IOMUXC_UART4_RXD__I2C6_SCL 0x238 0x498 0x5CC 0x4 0x2 +#define MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28 0x238 0x498 0x000 0x5 0x0 +#define MX8MP_IOMUXC_UART4_RXD__TPSMP_HDATA30 0x238 0x498 0x000 0x7 0x0 +#define MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x23C 0x49C 0x000 0x0 0x0 +#define MX8MP_IOMUXC_UART4_TXD__UART4_DTE_RX 0x23C 0x49C 0x600 0x0 0x9 +#define MX8MP_IOMUXC_UART4_TXD__UART2_DCE_RTS 0x23C 0x49C 0x5EC 0x1 0x5 +#define MX8MP_IOMUXC_UART4_TXD__UART2_DTE_CTS 0x23C 0x49C 0x000 0x1 0x0 +#define MX8MP_IOMUXC_UART4_TXD__GPT1_CAPTURE1 0x23C 0x49C 0x594 0x3 0x1 +#define MX8MP_IOMUXC_UART4_TXD__I2C6_SDA 0x23C 0x49C 0x5D0 0x4 0x2 +#define MX8MP_IOMUXC_UART4_TXD__GPIO5_IO29 0x23C 0x49C 0x000 0x5 0x0 +#define MX8MP_IOMUXC_UART4_TXD__TPSMP_HDATA31 0x23C 0x49C 0x000 0x7 0x0 +#define MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_EARC_SCL 0x240 0x4A0 0x000 0x0 0x0 +#define MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x240 0x4A0 0x5C4 0x3 0x3 +#define MX8MP_IOMUXC_HDMI_DDC_SCL__CAN1_TX 0x240 0x4A0 0x000 0x4 0x0 +#define MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x240 0x4A0 0x000 0x5 0x0 +#define MX8MP_IOMUXC_HDMI_DDC_SCL__AUDIOMIX_test_out00 0x240 0x4A0 0x000 0x6 0x0 +#define MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_EARC_SDA 0x244 0x4A4 0x000 0x0 0x0 +#define MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x244 0x4A4 0x5C8 0x3 0x3 +#define MX8MP_IOMUXC_HDMI_DDC_SDA__CAN1_RX 0x244 0x4A4 0x54C 0x4 0x3 +#define MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x244 0x4A4 0x000 0x5 0x0 +#define MX8MP_IOMUXC_HDMI_DDC_SDA__AUDIOMIX_test_out01 0x244 0x4A4 0x000 0x6 0x0 +#define MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_EARC_CEC 0x248 0x4A8 0x000 0x0 0x0 +#define MX8MP_IOMUXC_HDMI_CEC__I2C6_SCL 0x248 0x4A8 0x5CC 0x3 0x3 +#define MX8MP_IOMUXC_HDMI_CEC__CAN2_TX 0x248 0x4A8 0x000 0x4 0x0 +#define MX8MP_IOMUXC_HDMI_CEC__GPIO3_IO28 0x248 0x4A8 0x000 0x5 0x0 +#define MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_EARC_DC_HPD 0x24C 0x4AC 0x000 0x0 0x0 +#define MX8MP_IOMUXC_HDMI_HPD__AUDIOMIX_EARC_HDMI_HPD_O 0x24C 0x4AC 0x000 0x1 0x0 +#define MX8MP_IOMUXC_HDMI_HPD__I2C6_SDA 0x24C 0x4AC 0x5D0 0x3 0x3 +#define MX8MP_IOMUXC_HDMI_HPD__CAN2_RX 0x24C 0x4AC 0x550 0x4 0x3 +#define MX8MP_IOMUXC_HDMI_HPD__GPIO3_IO29 0x24C 0x4AC 0x000 0x5 0x0 + +#endif /* __DTS_IMX8MP_PINFUNC_H */ diff --git a/sys/gnu/dts/arm64/freescale/imx8mp.dtsi b/sys/gnu/dts/arm64/freescale/imx8mp.dtsi new file mode 100644 index 000000000000..9f6ba763238d --- /dev/null +++ b/sys/gnu/dts/arm64/freescale/imx8mp.dtsi @@ -0,0 +1,654 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +#include <dt-bindings/clock/imx8mp-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "imx8mp-pinfunc.h" + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &fec; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + clock-latency = <61036>; + clocks = <&clk IMX8MP_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + clock-latency = <61036>; + clocks = <&clk IMX8MP_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + clock-latency = <61036>; + clocks = <&clk IMX8MP_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + clock-latency = <61036>; + clocks = <&clk IMX8MP_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + osc_32k: clock-osc-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock-ext2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock-ext3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock-ext4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <8000000>; + arm,no-tick-in-suspend; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x3e000000>; + + aips1: bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30000000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPIO1_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 5 30>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPIO2_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 35 21>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPIO3_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 0 144 4>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPIO4_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 82 32>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPIO5_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 114 30>; + }; + + wdog1: watchdog@30280000 { + compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_WDOG1_ROOT>; + status = "disabled"; + }; + + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mp-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + gpr: iomuxc-gpr@30340000 { + compatible = "fsl,imx8mp-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + ocotp: ocotp-ctrl@30350000 { + compatible = "fsl,imx8mp-ocotp", "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>; + /* For nvmem subnodes */ + #address-cells = <1>; + #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; + }; + + anatop: anatop@30360000 { + compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop", + "syscon"; + reg = <0x30360000 0x10000>; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap =<&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_SNVS_ROOT>; + clock-names = "snvs-rtc"; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_SNVS_ROOT>; + clock-names = "snvs-pwrkey"; + linux,keycode = <KEY_POWER>; + wakeup-source; + status = "disabled"; + }; + }; + + clk: clock-controller@30380000 { + compatible = "fsl,imx8mp-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + assigned-clocks = <&clk IMX8MP_CLK_NOC>, + <&clk IMX8MP_CLK_NOC_IO>, + <&clk IMX8MP_CLK_GIC>, + <&clk IMX8MP_CLK_AUDIO_AHB>, + <&clk IMX8MP_CLK_AUDIO_AXI_SRC>, + <&clk IMX8MP_CLK_IPG_AUDIO_ROOT>, + <&clk IMX8MP_AUDIO_PLL1>, + <&clk IMX8MP_AUDIO_PLL2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, + <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL2_500M>, + <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <1000000000>, + <800000000>, + <500000000>, + <400000000>, + <800000000>, + <400000000>, + <393216000>, + <361267200>; + }; + + src: reset-controller@30390000 { + compatible = "fsl,imx8mp-src", "syscon"; + reg = <0x30390000 0x10000>; + #reset-cells = <1>; + }; + }; + + aips2: bus@30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30400000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pwm1: pwm@30660000 { + compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_PWM1_ROOT>, + <&clk IMX8MP_CLK_PWM1_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_PWM2_ROOT>, + <&clk IMX8MP_CLK_PWM2_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_PWM3_ROOT>, + <&clk IMX8MP_CLK_PWM3_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_PWM4_ROOT>, + <&clk IMX8MP_CLK_PWM4_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + system_counter: timer@306a0000 { + compatible = "nxp,sysctr-timer"; + reg = <0x306a0000 0x20000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc_24m>; + clock-names = "per"; + }; + }; + + aips3: bus@30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30800000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ecspi1: spi@30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi"; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>, + <&clk IMX8MP_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi2: spi@30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi"; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>, + <&clk IMX8MP_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi3: spi@30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi"; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>, + <&clk IMX8MP_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@30860000 { + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_UART1_ROOT>, + <&clk IMX8MP_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_UART3_ROOT>, + <&clk IMX8MP_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_UART2_ROOT>, + <&clk IMX8MP_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + crypto: crypto@30900000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30900000 0x40000>; + ranges = <0 0x30900000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_AHB>, + <&clk IMX8MP_CLK_IPG_ROOT>; + clock-names = "aclk", "ipg"; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + i2c1: i2c@30a20000 { + compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a20000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_I2C1_ROOT>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a30000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_I2C2_ROOT>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a40000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_I2C3_ROOT>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a50000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_I2C4_ROOT>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_UART4_ROOT>, + <&clk IMX8MP_CLK_UART4_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c5: i2c@30ad0000 { + compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30ad0000 0x10000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_I2C5_ROOT>; + status = "disabled"; + }; + + i2c6: i2c@30ae0000 { + compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30ae0000 0x10000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_I2C6_ROOT>; + status = "disabled"; + }; + + usdhc1: mmc@30b40000 { + compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_DUMMY>, + <&clk IMX8MP_CLK_NAND_USDHC_BUS>, + <&clk IMX8MP_CLK_USDHC1_ROOT>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc@30b50000 { + compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_DUMMY>, + <&clk IMX8MP_CLK_NAND_USDHC_BUS>, + <&clk IMX8MP_CLK_USDHC2_ROOT>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: mmc@30b60000 { + compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b60000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_DUMMY>, + <&clk IMX8MP_CLK_NAND_USDHC_BUS>, + <&clk IMX8MP_CLK_USDHC3_ROOT>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + sdma1: dma-controller@30bd0000 { + compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; + reg = <0x30bd0000 0x10000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>, + <&clk IMX8MP_CLK_SDMA1_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + fec: ethernet@30be0000 { + compatible = "fsl,imx8mp-fec", "fsl,imx8mq-fec"; + reg = <0x30be0000 0x10000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_ENET1_ROOT>, + <&clk IMX8MP_CLK_SIM_ENET_ROOT>, + <&clk IMX8MP_CLK_ENET_TIMER>, + <&clk IMX8MP_CLK_ENET_REF>, + <&clk IMX8MP_CLK_ENET_PHY_REF>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>, + <&clk IMX8MP_CLK_ENET_TIMER>, + <&clk IMX8MP_CLK_ENET_REF>, + <&clk IMX8MP_CLK_ENET_TIMER>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, + <&clk IMX8MP_SYS_PLL2_100M>, + <&clk IMX8MP_SYS_PLL2_125M>; + assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + status = "disabled"; + }; + }; + + gic: interrupt-controller@38800000 { + compatible = "arm,gic-v3"; + reg = <0x38800000 0x10000>, + <0x38880000 0xc0000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + }; + }; +}; diff --git a/sys/gnu/dts/arm64/freescale/imx8mq-evk.dts b/sys/gnu/dts/arm64/freescale/imx8mq-evk.dts index 94066d49d6ed..c9241abf0df3 100644 --- a/sys/gnu/dts/arm64/freescale/imx8mq-evk.dts +++ b/sys/gnu/dts/arm64/freescale/imx8mq-evk.dts @@ -137,6 +137,8 @@ pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; + phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; fsl,magic-packet; status = "okay"; diff --git a/sys/gnu/dts/arm64/freescale/imx8mq-librem5-devkit.dts b/sys/gnu/dts/arm64/freescale/imx8mq-librem5-devkit.dts index 764a4cb4e125..10eca94194be 100644 --- a/sys/gnu/dts/arm64/freescale/imx8mq-librem5-devkit.dts +++ b/sys/gnu/dts/arm64/freescale/imx8mq-librem5-devkit.dts @@ -55,6 +55,15 @@ wakeup-source; linux,code = <KEY_HP>; }; + + wwan-wake { + label = "WWAN_WAKE"; + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <8 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_PHONE>; + }; }; leds { @@ -148,6 +157,55 @@ regulator-always-on; }; + wwan_codec: sound-wwan-codec { + compatible = "option,gtm601"; + #sound-dai-cells = <0>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + frame-master; + bitclock-master; + }; + }; + + sound-wwan { + compatible = "simple-audio-card"; + simple-audio-card,name = "SIMCom SIM7100"; + simple-audio-card,format = "dsp_a"; + + simple-audio-card,cpu { + sound-dai = <&sai6>; + }; + + telephony_link_master: simple-audio-card,codec { + sound-dai = <&wwan_codec>; + frame-master; + bitclock-master; + }; + }; + vibrator { compatible = "gpio-vibrator"; pinctrl-names = "default"; @@ -169,6 +227,22 @@ }; }; +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + &clk { assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>; assigned-clock-rates = <786432000>, <722534400>; @@ -354,10 +428,10 @@ PDO_FIXED_USB_COMM | PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP )>; - sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM | + sink-pdos = <PDO_FIXED(5000, 3500, PDO_FIXED_USB_COMM | PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP ) - PDO_VAR(5000, 3000, 3000)>; + PDO_VAR(5000, 5000, 3500)>; op-sink-microwatt = <10000000>; ports { @@ -426,6 +500,19 @@ vddio-supply = <®_3v3_p>; }; + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + #sound-dai-cells = <0>; + reg = <0x0a>; + VDDD-supply = <®_1v8_p>; + VDDIO-supply = <®_3v3_p>; + VDDA-supply = <®_3v3_p>; + }; + touchscreen@5d { compatible = "goodix,gt5688"; reg = <0x5d>; @@ -441,11 +528,20 @@ VDDIO-supply = <®_1v8_p>; }; + proximity-sensor@60 { + compatible = "vishay,vcnl4040"; + reg = <0x60>; + pinctrl-0 = <&pinctrl_prox>; + }; + accel-gyro@6a { compatible = "st,lsm9ds1-imu"; reg = <0x6a>; vdd-supply = <®_3v3_p>; vddio-supply = <®_3v3_p>; + mount-matrix = "1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; }; }; @@ -508,6 +604,7 @@ MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16 MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16 MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */ + MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */ >; }; @@ -543,6 +640,12 @@ >; }; + pinctrl_prox: proxgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x80 /* prox intr */ + >; + }; + pinctrl_pwr_en: pwrengrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x06 @@ -555,6 +658,25 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 + >; + }; + + pinctrl_sai6: sai6grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0xd6 + >; + }; + pinctrl_typec: typecgrp { fsl,pins = < MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16 @@ -730,6 +852,25 @@ status = "okay"; }; +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&sai6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai6>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI6>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + fsl,sai-synchronous-rx; + status = "okay"; +}; + &uart1 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -750,6 +891,7 @@ }; &usb3_phy0 { + vbus-supply = <®_5v_p>; status = "okay"; }; @@ -808,7 +950,7 @@ bus-width = <4>; vmmc-supply = <®_usdhc2_vmmc>; power-supply = <&wifi_pwr_en>; - non-removable; + broken-cd; disable-wp; cap-sdio-irq; keep-power-in-suspend; diff --git a/sys/gnu/dts/arm64/freescale/imx8mq-phanbell.dts b/sys/gnu/dts/arm64/freescale/imx8mq-phanbell.dts index 3f2a489a4ad8..77ab568fae67 100644 --- a/sys/gnu/dts/arm64/freescale/imx8mq-phanbell.dts +++ b/sys/gnu/dts/arm64/freescale/imx8mq-phanbell.dts @@ -35,6 +35,16 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + fan: gpio-fan { + compatible = "gpio-fan"; + gpio-fan,speed-map = <0 0 8600 1>; + gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; + #cooling-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_fan>; + status = "okay"; + }; }; &A53_0 { @@ -53,6 +63,53 @@ cpu-supply = <&buck2>; }; +&cpu_thermal { + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_alert1: trip1 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip3 { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + + fan_toggle0: trip4 { + temperature = <65000>; + hysteresis = <10000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&A53_0 0 1>; /* Exclude highest OPP */ + }; + + map1 { + trip = <&cpu_alert1>; + cooling-device = + <&A53_0 0 2>; /* Exclude two highest OPPs */ + }; + + map4 { + trip = <&fan_toggle0>; + cooling-device = <&fan 0 1>; + }; + }; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -201,6 +258,27 @@ }; }; +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; + phy-reset-post-delay = <50>; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -254,6 +332,32 @@ }; &iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_gpio_fan: gpiofangrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x16 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f diff --git a/sys/gnu/dts/arm64/freescale/imx8mq.dtsi b/sys/gnu/dts/arm64/freescale/imx8mq.dtsi index 6a1e83922c71..bab88369be1b 100644 --- a/sys/gnu/dts/arm64/freescale/imx8mq.dtsi +++ b/sys/gnu/dts/arm64/freescale/imx8mq.dtsi @@ -198,7 +198,7 @@ }; thermal-zones { - cpu-thermal { + cpu_thermal: cpu-thermal { polling-delay-passive = <250>; polling-delay = <2000>; thermal-sensors = <&tmu 0>; @@ -290,7 +290,8 @@ dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; bus@30000000 { /* AIPS1 */ - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30000000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; @@ -521,7 +522,7 @@ status = "disabled"; }; - iomuxc: iomuxc@30330000 { + iomuxc: pinctrl@30330000 { compatible = "fsl,imx8mq-iomuxc"; reg = <0x30330000 0x10000>; }; @@ -574,6 +575,8 @@ compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>; + clock-names = "snvs-pwrkey"; linux,keycode = <KEY_POWER>; wakeup-source; status = "disabled"; @@ -692,7 +695,8 @@ }; bus@30400000 { /* AIPS2 */ - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30400000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x30400000 0x30400000 0x400000>; @@ -751,7 +755,8 @@ }; bus@30800000 { /* AIPS3 */ - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30800000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x30800000 0x30800000 0x400000>, @@ -1023,7 +1028,8 @@ }; bus@32c00000 { /* AIPS4 */ - compatible = "simple-bus"; + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x32c00000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; diff --git a/sys/gnu/dts/arm64/freescale/imx8qxp.dtsi b/sys/gnu/dts/arm64/freescale/imx8qxp.dtsi index fb5f752b15fe..e8ffb7590656 100644 --- a/sys/gnu/dts/arm64/freescale/imx8qxp.dtsi +++ b/sys/gnu/dts/arm64/freescale/imx8qxp.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/pads-imx8qxp.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -189,6 +190,11 @@ compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; timeout-sec = <60>; }; + + tsens: thermal-sensor { + compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal"; + #thermal-sensor-cells = <1>; + }; }; timer { @@ -586,4 +592,37 @@ #clock-cells = <1>; }; }; + + thermal_zones: thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_SYSTEM>; + + trips { + cpu_alert0: trip0 { + temperature = <107000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <127000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; diff --git a/sys/gnu/dts/arm64/freescale/s32v234.dtsi b/sys/gnu/dts/arm64/freescale/s32v234.dtsi index e746b9c48f7a..ba0b5305d481 100644 --- a/sys/gnu/dts/arm64/freescale/s32v234.dtsi +++ b/sys/gnu/dts/arm64/freescale/s32v234.dtsi @@ -104,7 +104,7 @@ interrupt-parent = <&gic>; ranges; - aips0: aips-bus@40000000 { + aips0: bus@40000000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -120,7 +120,7 @@ }; }; - aips1: aips-bus@40080000 { + aips1: bus@40080000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; diff --git a/sys/gnu/dts/arm64/intel/socfpga_agilex_socdk.dts b/sys/gnu/dts/arm64/intel/socfpga_agilex_socdk.dts index e794a12ba7c5..51d948323bfd 100644 --- a/sys/gnu/dts/arm64/intel/socfpga_agilex_socdk.dts +++ b/sys/gnu/dts/arm64/intel/socfpga_agilex_socdk.dts @@ -121,12 +121,12 @@ qspi_boot: partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x034B0000>; + reg = <0x0 0x03FE0000>; }; - qspi_rootfs: partition@34B0000 { + qspi_rootfs: partition@3FE0000 { label = "Root Filesystem - JFFS2"; - reg = <0x034B0000 0x0EB50000>; + reg = <0x03FE0000 0x0C020000>; }; }; }; diff --git a/sys/gnu/dts/arm64/marvell/armada-3720-espressobin-emmc.dts b/sys/gnu/dts/arm64/marvell/armada-3720-espressobin-emmc.dts index bd9ed9dc9c3e..ec72a11ed80f 100644 --- a/sys/gnu/dts/arm64/marvell/armada-3720-espressobin-emmc.dts +++ b/sys/gnu/dts/arm64/marvell/armada-3720-espressobin-emmc.dts @@ -11,6 +11,8 @@ * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf */ +/dts-v1/; + #include "armada-3720-espressobin.dtsi" / { diff --git a/sys/gnu/dts/arm64/marvell/armada-3720-espressobin-v7-emmc.dts b/sys/gnu/dts/arm64/marvell/armada-3720-espressobin-v7-emmc.dts index 6e876a6d9532..03733fd92732 100644 --- a/sys/gnu/dts/arm64/marvell/armada-3720-espressobin-v7-emmc.dts +++ b/sys/gnu/dts/arm64/marvell/armada-3720-espressobin-v7-emmc.dts @@ -11,6 +11,8 @@ * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 */ +/dts-v1/; + #include "armada-3720-espressobin.dtsi" / { diff --git a/sys/gnu/dts/arm64/marvell/armada-3720-espressobin-v7.dts b/sys/gnu/dts/arm64/marvell/armada-3720-espressobin-v7.dts index 0f8405d085fd..8570c5f47d7d 100644 --- a/sys/gnu/dts/arm64/marvell/armada-3720-espressobin-v7.dts +++ b/sys/gnu/dts/arm64/marvell/armada-3720-espressobin-v7.dts @@ -11,6 +11,8 @@ * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 */ +/dts-v1/; + #include "armada-3720-espressobin.dtsi" / { diff --git a/sys/gnu/dts/arm64/marvell/armada-3720-espressobin.dtsi b/sys/gnu/dts/arm64/marvell/armada-3720-espressobin.dtsi index 53b8ac55a7f3..42e992f9c8a5 100644 --- a/sys/gnu/dts/arm64/marvell/armada-3720-espressobin.dtsi +++ b/sys/gnu/dts/arm64/marvell/armada-3720-espressobin.dtsi @@ -7,12 +7,16 @@ * */ -/dts-v1/; - #include <dt-bindings/gpio/gpio.h> #include "armada-372x.dtsi" / { + aliases { + ethernet0 = ð0; + serial0 = &uart0; + serial1 = &uart1; + }; + chosen { stdout-path = "serial0:115200n8"; }; diff --git a/sys/gnu/dts/arm64/marvell/armada-8040-clearfog-gt-8k.dts b/sys/gnu/dts/arm64/marvell/armada-8040-clearfog-gt-8k.dts index a211a046b2f2..b90d78a5724b 100644 --- a/sys/gnu/dts/arm64/marvell/armada-8040-clearfog-gt-8k.dts +++ b/sys/gnu/dts/arm64/marvell/armada-8040-clearfog-gt-8k.dts @@ -367,6 +367,7 @@ pinctrl-0 = <&cp0_copper_eth_phy_reset>; reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; + reset-deassert-us = <10000>; }; switch0: switch0@4 { diff --git a/sys/gnu/dts/arm64/marvell/armada-8040-mcbin.dtsi b/sys/gnu/dts/arm64/marvell/armada-8040-mcbin.dtsi index 572e2610e0a3..cbcb210cb6d8 100644 --- a/sys/gnu/dts/arm64/marvell/armada-8040-mcbin.dtsi +++ b/sys/gnu/dts/arm64/marvell/armada-8040-mcbin.dtsi @@ -71,6 +71,7 @@ tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp1_sfpp0_pins>; + maximum-power-milliwatt = <2000>; }; sfp_eth1: sfp-eth1 { @@ -83,6 +84,7 @@ tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; + maximum-power-milliwatt = <2000>; }; sfp_eth3: sfp-eth3 { @@ -95,6 +97,7 @@ tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>; + maximum-power-milliwatt = <2000>; }; }; diff --git a/sys/gnu/dts/arm64/marvell/armada-ap806-dual.dtsi b/sys/gnu/dts/arm64/marvell/armada-ap806-dual.dtsi index 09849558a776..fcab5173fe67 100644 --- a/sys/gnu/dts/arm64/marvell/armada-ap806-dual.dtsi +++ b/sys/gnu/dts/arm64/marvell/armada-ap806-dual.dtsi @@ -53,4 +53,9 @@ cache-sets = <512>; }; }; + + thermal-zones { + /delete-node/ ap-thermal-cpu2; + /delete-node/ ap-thermal-cpu3; + }; }; diff --git a/sys/gnu/dts/arm64/marvell/armada-ap807-quad.dtsi b/sys/gnu/dts/arm64/marvell/armada-ap807-quad.dtsi index 840466e143b4..68782f161f12 100644 --- a/sys/gnu/dts/arm64/marvell/armada-ap807-quad.dtsi +++ b/sys/gnu/dts/arm64/marvell/armada-ap807-quad.dtsi @@ -17,7 +17,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; #cooling-cells = <2>; @@ -32,7 +32,7 @@ }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; #cooling-cells = <2>; @@ -47,7 +47,7 @@ }; cpu2: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x100>; enable-method = "psci"; #cooling-cells = <2>; @@ -62,7 +62,7 @@ }; cpu3: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x101>; enable-method = "psci"; #cooling-cells = <2>; diff --git a/sys/gnu/dts/arm64/mediatek/mt2712e.dtsi b/sys/gnu/dts/arm64/mediatek/mt2712e.dtsi index 43307bad3f0d..2cd8b33886e5 100644 --- a/sys/gnu/dts/arm64/mediatek/mt2712e.dtsi +++ b/sys/gnu/dts/arm64/mediatek/mt2712e.dtsi @@ -278,7 +278,7 @@ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; }; - scpsys: scpsys@10006000 { + scpsys: power-controller@10006000 { compatible = "mediatek,mt2712-scpsys", "syscon"; #power-domain-cells = <1>; reg = <0 0x10006000 0 0x1000>; @@ -303,6 +303,12 @@ status = "disabled"; }; + rtc: rtc@10011000 { + compatible = "mediatek,mt2712-rtc"; + reg = <0 0x10011000 0 0x1000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>; + }; + spis1: spi@10013000 { compatible = "mediatek,mt2712-spi-slave"; reg = <0 0x10013000 0 0x100>; diff --git a/sys/gnu/dts/arm64/mediatek/mt6797.dtsi b/sys/gnu/dts/arm64/mediatek/mt6797.dtsi index 2b2a69c7567f..136ef9527a0d 100644 --- a/sys/gnu/dts/arm64/mediatek/mt6797.dtsi +++ b/sys/gnu/dts/arm64/mediatek/mt6797.dtsi @@ -157,7 +157,7 @@ }; }; - scpsys: scpsys@10006000 { + scpsys: power-controller@10006000 { compatible = "mediatek,mt6797-scpsys"; #power-domain-cells = <1>; reg = <0 0x10006000 0 0x1000>; diff --git a/sys/gnu/dts/arm64/mediatek/mt7622.dtsi b/sys/gnu/dts/arm64/mediatek/mt7622.dtsi index dac51e98204c..339dc9f88f43 100644 --- a/sys/gnu/dts/arm64/mediatek/mt7622.dtsi +++ b/sys/gnu/dts/arm64/mediatek/mt7622.dtsi @@ -230,7 +230,7 @@ #reset-cells = <1>; }; - scpsys: scpsys@10006000 { + scpsys: power-controller@10006000 { compatible = "mediatek,mt7622-scpsys", "syscon"; #power-domain-cells = <1>; diff --git a/sys/gnu/dts/arm64/mediatek/mt8173.dtsi b/sys/gnu/dts/arm64/mediatek/mt8173.dtsi index 8b4e806d5119..d819e44d94a8 100644 --- a/sys/gnu/dts/arm64/mediatek/mt8173.dtsi +++ b/sys/gnu/dts/arm64/mediatek/mt8173.dtsi @@ -331,6 +331,7 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,no-tick-in-suspend; }; soc { @@ -436,7 +437,7 @@ }; }; - scpsys: scpsys@10006000 { + scpsys: power-controller@10006000 { compatible = "mediatek,mt8173-scpsys"; #power-domain-cells = <1>; reg = <0 0x10006000 0 0x1000>; @@ -1401,8 +1402,8 @@ "venc_lt_sel"; assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>, <&topckgen CLK_TOP_VENC_LT_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>, - <&topckgen CLK_TOP_UNIVPLL1_D2>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>, + <&topckgen CLK_TOP_VCODECPLL_370P5>; }; jpegdec: jpegdec@18004000 { diff --git a/sys/gnu/dts/arm64/mediatek/mt8183.dtsi b/sys/gnu/dts/arm64/mediatek/mt8183.dtsi index 124f9d3e09f5..97863adb7bc0 100644 --- a/sys/gnu/dts/arm64/mediatek/mt8183.dtsi +++ b/sys/gnu/dts/arm64/mediatek/mt8183.dtsi @@ -74,6 +74,9 @@ reg = <0x000>; enable-method = "psci"; capacity-dmips-mhz = <741>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <84>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -82,6 +85,9 @@ reg = <0x001>; enable-method = "psci"; capacity-dmips-mhz = <741>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <84>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -90,6 +96,9 @@ reg = <0x002>; enable-method = "psci"; capacity-dmips-mhz = <741>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <84>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -98,6 +107,9 @@ reg = <0x003>; enable-method = "psci"; capacity-dmips-mhz = <741>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <84>; + #cooling-cells = <2>; }; cpu4: cpu@100 { @@ -106,6 +118,9 @@ reg = <0x100>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <211>; + #cooling-cells = <2>; }; cpu5: cpu@101 { @@ -114,6 +129,9 @@ reg = <0x101>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <211>; + #cooling-cells = <2>; }; cpu6: cpu@102 { @@ -122,6 +140,9 @@ reg = <0x102>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <211>; + #cooling-cells = <2>; }; cpu7: cpu@103 { @@ -130,6 +151,31 @@ reg = <0x103>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <211>; + #cooling-cells = <2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x00010001>; + entry-latency-us = <200>; + exit-latency-us = <200>; + min-residency-us = <800>; + }; + + CLUSTER_SLEEP: cluster-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x01010001>; + entry-latency-us = <250>; + exit-latency-us = <400>; + min-residency-us = <1300>; + }; }; }; @@ -255,6 +301,13 @@ #interrupt-cells = <2>; }; + watchdog: watchdog@10007000 { + compatible = "mediatek,mt8183-wdt", + "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x100>; + #reset-cells = <1>; + }; + apmixedsys: syscon@1000c000 { compatible = "mediatek,mt8183-apmixedsys", "syscon"; reg = <0 0x1000c000 0 0x1000>; diff --git a/sys/gnu/dts/arm64/mediatek/mt8516-pinfunc.h b/sys/gnu/dts/arm64/mediatek/mt8516-pinfunc.h new file mode 100644 index 000000000000..73339bb48f0d --- /dev/null +++ b/sys/gnu/dts/arm64/mediatek/mt8516-pinfunc.h @@ -0,0 +1,663 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 MediaTek Inc. + */ +#ifndef __DTS_MT8516_PINFUNC_H +#define __DTS_MT8516_PINFUNC_H + +#include <dt-bindings/pinctrl/mt65xx.h> + +#define MT8516_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define MT8516_PIN_0_EINT0__FUNC_PWM_B (MTK_PIN_NO(0) | 1) +#define MT8516_PIN_0_EINT0__FUNC_I2S2_BCK (MTK_PIN_NO(0) | 3) +#define MT8516_PIN_0_EINT0__FUNC_EXT_TXD0 (MTK_PIN_NO(0) | 4) +#define MT8516_PIN_0_EINT0__FUNC_SQICS (MTK_PIN_NO(0) | 6) +#define MT8516_PIN_0_EINT0__FUNC_DBG_MON_A_6 (MTK_PIN_NO(0) | 7) + +#define MT8516_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define MT8516_PIN_1_EINT1__FUNC_PWM_C (MTK_PIN_NO(1) | 1) +#define MT8516_PIN_1_EINT1__FUNC_I2S2_DI (MTK_PIN_NO(1) | 3) +#define MT8516_PIN_1_EINT1__FUNC_EXT_TXD1 (MTK_PIN_NO(1) | 4) +#define MT8516_PIN_1_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(1) | 5) +#define MT8516_PIN_1_EINT1__FUNC_SQISO (MTK_PIN_NO(1) | 6) +#define MT8516_PIN_1_EINT1__FUNC_DBG_MON_A_7 (MTK_PIN_NO(1) | 7) + +#define MT8516_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define MT8516_PIN_2_EINT2__FUNC_CLKM0 (MTK_PIN_NO(2) | 1) +#define MT8516_PIN_2_EINT2__FUNC_I2S2_LRCK (MTK_PIN_NO(2) | 3) +#define MT8516_PIN_2_EINT2__FUNC_EXT_TXD2 (MTK_PIN_NO(2) | 4) +#define MT8516_PIN_2_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(2) | 5) +#define MT8516_PIN_2_EINT2__FUNC_SQISI (MTK_PIN_NO(2) | 6) +#define MT8516_PIN_2_EINT2__FUNC_DBG_MON_A_8 (MTK_PIN_NO(2) | 7) + +#define MT8516_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define MT8516_PIN_3_EINT3__FUNC_CLKM1 (MTK_PIN_NO(3) | 1) +#define MT8516_PIN_3_EINT3__FUNC_SPI_MI (MTK_PIN_NO(3) | 3) +#define MT8516_PIN_3_EINT3__FUNC_EXT_TXD3 (MTK_PIN_NO(3) | 4) +#define MT8516_PIN_3_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(3) | 5) +#define MT8516_PIN_3_EINT3__FUNC_SQIWP (MTK_PIN_NO(3) | 6) +#define MT8516_PIN_3_EINT3__FUNC_DBG_MON_A_9 (MTK_PIN_NO(3) | 7) + +#define MT8516_PIN_4_EINT4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define MT8516_PIN_4_EINT4__FUNC_CLKM2 (MTK_PIN_NO(4) | 1) +#define MT8516_PIN_4_EINT4__FUNC_SPI_MO (MTK_PIN_NO(4) | 3) +#define MT8516_PIN_4_EINT4__FUNC_EXT_TXC (MTK_PIN_NO(4) | 4) +#define MT8516_PIN_4_EINT4__FUNC_CONN_MCU_TCK (MTK_PIN_NO(4) | 5) +#define MT8516_PIN_4_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(4) | 6) +#define MT8516_PIN_4_EINT4__FUNC_DBG_MON_A_10 (MTK_PIN_NO(4) | 7) + +#define MT8516_PIN_5_EINT5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define MT8516_PIN_5_EINT5__FUNC_UCTS2 (MTK_PIN_NO(5) | 1) +#define MT8516_PIN_5_EINT5__FUNC_SPI_CSB (MTK_PIN_NO(5) | 3) +#define MT8516_PIN_5_EINT5__FUNC_EXT_RXER (MTK_PIN_NO(5) | 4) +#define MT8516_PIN_5_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(5) | 5) +#define MT8516_PIN_5_EINT5__FUNC_CONN_TEST_CK (MTK_PIN_NO(5) | 6) +#define MT8516_PIN_5_EINT5__FUNC_DBG_MON_A_11 (MTK_PIN_NO(5) | 7) + +#define MT8516_PIN_6_EINT6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define MT8516_PIN_6_EINT6__FUNC_URTS2 (MTK_PIN_NO(6) | 1) +#define MT8516_PIN_6_EINT6__FUNC_SPI_CLK (MTK_PIN_NO(6) | 3) +#define MT8516_PIN_6_EINT6__FUNC_EXT_RXC (MTK_PIN_NO(6) | 4) +#define MT8516_PIN_6_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(6) | 5) +#define MT8516_PIN_6_EINT6__FUNC_DBG_MON_A_12 (MTK_PIN_NO(6) | 7) + +#define MT8516_PIN_7_EINT7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define MT8516_PIN_7_EINT7__FUNC_SQIRST (MTK_PIN_NO(7) | 1) +#define MT8516_PIN_7_EINT7__FUNC_SDA1_0 (MTK_PIN_NO(7) | 3) +#define MT8516_PIN_7_EINT7__FUNC_EXT_RXDV (MTK_PIN_NO(7) | 4) +#define MT8516_PIN_7_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(7) | 5) +#define MT8516_PIN_7_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(7) | 6) +#define MT8516_PIN_7_EINT7__FUNC_DBG_MON_A_13 (MTK_PIN_NO(7) | 7) + +#define MT8516_PIN_8_EINT8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define MT8516_PIN_8_EINT8__FUNC_SQICK (MTK_PIN_NO(8) | 1) +#define MT8516_PIN_8_EINT8__FUNC_CLKM3 (MTK_PIN_NO(8) | 2) +#define MT8516_PIN_8_EINT8__FUNC_SCL1_0 (MTK_PIN_NO(8) | 3) +#define MT8516_PIN_8_EINT8__FUNC_EXT_RXD0 (MTK_PIN_NO(8) | 4) +#define MT8516_PIN_8_EINT8__FUNC_ANT_SEL0 (MTK_PIN_NO(8) | 5) +#define MT8516_PIN_8_EINT8__FUNC_DBG_MON_A_14 (MTK_PIN_NO(8) | 7) + +#define MT8516_PIN_9_EINT9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define MT8516_PIN_9_EINT9__FUNC_CLKM4 (MTK_PIN_NO(9) | 1) +#define MT8516_PIN_9_EINT9__FUNC_SDA2_0 (MTK_PIN_NO(9) | 2) +#define MT8516_PIN_9_EINT9__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3) +#define MT8516_PIN_9_EINT9__FUNC_EXT_RXD1 (MTK_PIN_NO(9) | 4) +#define MT8516_PIN_9_EINT9__FUNC_ANT_SEL1 (MTK_PIN_NO(9) | 5) +#define MT8516_PIN_9_EINT9__FUNC_DBG_MON_A_15 (MTK_PIN_NO(9) | 7) + +#define MT8516_PIN_10_EINT10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define MT8516_PIN_10_EINT10__FUNC_CLKM5 (MTK_PIN_NO(10) | 1) +#define MT8516_PIN_10_EINT10__FUNC_SCL2_0 (MTK_PIN_NO(10) | 2) +#define MT8516_PIN_10_EINT10__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(10) | 3) +#define MT8516_PIN_10_EINT10__FUNC_EXT_RXD2 (MTK_PIN_NO(10) | 4) +#define MT8516_PIN_10_EINT10__FUNC_ANT_SEL2 (MTK_PIN_NO(10) | 5) +#define MT8516_PIN_10_EINT10__FUNC_DBG_MON_A_16 (MTK_PIN_NO(10) | 7) + +#define MT8516_PIN_11_EINT11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define MT8516_PIN_11_EINT11__FUNC_CLKM4 (MTK_PIN_NO(11) | 1) +#define MT8516_PIN_11_EINT11__FUNC_PWM_C (MTK_PIN_NO(11) | 2) +#define MT8516_PIN_11_EINT11__FUNC_CONN_TEST_CK (MTK_PIN_NO(11) | 3) +#define MT8516_PIN_11_EINT11__FUNC_ANT_SEL3 (MTK_PIN_NO(11) | 4) +#define MT8516_PIN_11_EINT11__FUNC_EXT_RXD3 (MTK_PIN_NO(11) | 6) +#define MT8516_PIN_11_EINT11__FUNC_DBG_MON_A_17 (MTK_PIN_NO(11) | 7) + +#define MT8516_PIN_12_EINT12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define MT8516_PIN_12_EINT12__FUNC_CLKM5 (MTK_PIN_NO(12) | 1) +#define MT8516_PIN_12_EINT12__FUNC_PWM_A (MTK_PIN_NO(12) | 2) +#define MT8516_PIN_12_EINT12__FUNC_SPDIF_OUT (MTK_PIN_NO(12) | 3) +#define MT8516_PIN_12_EINT12__FUNC_ANT_SEL4 (MTK_PIN_NO(12) | 4) +#define MT8516_PIN_12_EINT12__FUNC_EXT_TXEN (MTK_PIN_NO(12) | 6) +#define MT8516_PIN_12_EINT12__FUNC_DBG_MON_A_18 (MTK_PIN_NO(12) | 7) + +#define MT8516_PIN_13_EINT13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define MT8516_PIN_13_EINT13__FUNC_TSF_IN (MTK_PIN_NO(13) | 3) +#define MT8516_PIN_13_EINT13__FUNC_ANT_SEL5 (MTK_PIN_NO(13) | 4) +#define MT8516_PIN_13_EINT13__FUNC_SPDIF_IN (MTK_PIN_NO(13) | 6) +#define MT8516_PIN_13_EINT13__FUNC_DBG_MON_A_19 (MTK_PIN_NO(13) | 7) + +#define MT8516_PIN_14_EINT14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define MT8516_PIN_14_EINT14__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(14) | 2) +#define MT8516_PIN_14_EINT14__FUNC_TDM_RX_MCK (MTK_PIN_NO(14) | 3) +#define MT8516_PIN_14_EINT14__FUNC_ANT_SEL1 (MTK_PIN_NO(14) | 4) +#define MT8516_PIN_14_EINT14__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(14) | 5) +#define MT8516_PIN_14_EINT14__FUNC_NCLE (MTK_PIN_NO(14) | 6) +#define MT8516_PIN_14_EINT14__FUNC_DBG_MON_B_8 (MTK_PIN_NO(14) | 7) + +#define MT8516_PIN_15_EINT15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define MT8516_PIN_15_EINT15__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(15) | 2) +#define MT8516_PIN_15_EINT15__FUNC_TDM_RX_BCK (MTK_PIN_NO(15) | 3) +#define MT8516_PIN_15_EINT15__FUNC_ANT_SEL2 (MTK_PIN_NO(15) | 4) +#define MT8516_PIN_15_EINT15__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(15) | 5) +#define MT8516_PIN_15_EINT15__FUNC_NCEB1 (MTK_PIN_NO(15) | 6) +#define MT8516_PIN_15_EINT15__FUNC_DBG_MON_B_9 (MTK_PIN_NO(15) | 7) + +#define MT8516_PIN_16_EINT16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) +#define MT8516_PIN_16_EINT16__FUNC_I2S_8CH_BCK (MTK_PIN_NO(16) | 2) +#define MT8516_PIN_16_EINT16__FUNC_TDM_RX_LRCK (MTK_PIN_NO(16) | 3) +#define MT8516_PIN_16_EINT16__FUNC_ANT_SEL3 (MTK_PIN_NO(16) | 4) +#define MT8516_PIN_16_EINT16__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(16) | 5) +#define MT8516_PIN_16_EINT16__FUNC_NCEB0 (MTK_PIN_NO(16) | 6) +#define MT8516_PIN_16_EINT16__FUNC_DBG_MON_B_10 (MTK_PIN_NO(16) | 7) + +#define MT8516_PIN_17_EINT17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) +#define MT8516_PIN_17_EINT17__FUNC_I2S_8CH_MCK (MTK_PIN_NO(17) | 2) +#define MT8516_PIN_17_EINT17__FUNC_TDM_RX_DI (MTK_PIN_NO(17) | 3) +#define MT8516_PIN_17_EINT17__FUNC_IDDIG (MTK_PIN_NO(17) | 4) +#define MT8516_PIN_17_EINT17__FUNC_ANT_SEL4 (MTK_PIN_NO(17) | 5) +#define MT8516_PIN_17_EINT17__FUNC_NREB (MTK_PIN_NO(17) | 6) +#define MT8516_PIN_17_EINT17__FUNC_DBG_MON_B_11 (MTK_PIN_NO(17) | 7) + +#define MT8516_PIN_18_EINT18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define MT8516_PIN_18_EINT18__FUNC_USB_DRVVBUS (MTK_PIN_NO(18) | 2) +#define MT8516_PIN_18_EINT18__FUNC_I2S3_LRCK (MTK_PIN_NO(18) | 3) +#define MT8516_PIN_18_EINT18__FUNC_CLKM1 (MTK_PIN_NO(18) | 4) +#define MT8516_PIN_18_EINT18__FUNC_ANT_SEL3 (MTK_PIN_NO(18) | 5) +#define MT8516_PIN_18_EINT18__FUNC_I2S2_BCK (MTK_PIN_NO(18) | 6) +#define MT8516_PIN_18_EINT18__FUNC_DBG_MON_A_20 (MTK_PIN_NO(18) | 7) + +#define MT8516_PIN_19_EINT19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define MT8516_PIN_19_EINT19__FUNC_UCTS1 (MTK_PIN_NO(19) | 1) +#define MT8516_PIN_19_EINT19__FUNC_IDDIG (MTK_PIN_NO(19) | 2) +#define MT8516_PIN_19_EINT19__FUNC_I2S3_BCK (MTK_PIN_NO(19) | 3) +#define MT8516_PIN_19_EINT19__FUNC_CLKM2 (MTK_PIN_NO(19) | 4) +#define MT8516_PIN_19_EINT19__FUNC_ANT_SEL4 (MTK_PIN_NO(19) | 5) +#define MT8516_PIN_19_EINT19__FUNC_I2S2_DI (MTK_PIN_NO(19) | 6) +#define MT8516_PIN_19_EINT19__FUNC_DBG_MON_A_21 (MTK_PIN_NO(19) | 7) + +#define MT8516_PIN_20_EINT20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define MT8516_PIN_20_EINT20__FUNC_URTS1 (MTK_PIN_NO(20) | 1) +#define MT8516_PIN_20_EINT20__FUNC_I2S3_DO (MTK_PIN_NO(20) | 3) +#define MT8516_PIN_20_EINT20__FUNC_CLKM3 (MTK_PIN_NO(20) | 4) +#define MT8516_PIN_20_EINT20__FUNC_ANT_SEL5 (MTK_PIN_NO(20) | 5) +#define MT8516_PIN_20_EINT20__FUNC_I2S2_LRCK (MTK_PIN_NO(20) | 6) +#define MT8516_PIN_20_EINT20__FUNC_DBG_MON_A_22 (MTK_PIN_NO(20) | 7) + +#define MT8516_PIN_21_EINT21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define MT8516_PIN_21_EINT21__FUNC_NRNB (MTK_PIN_NO(21) | 1) +#define MT8516_PIN_21_EINT21__FUNC_ANT_SEL0 (MTK_PIN_NO(21) | 2) +#define MT8516_PIN_21_EINT21__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(21) | 3) +#define MT8516_PIN_21_EINT21__FUNC_DBG_MON_B_31 (MTK_PIN_NO(21) | 7) + +#define MT8516_PIN_22_EINT22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define MT8516_PIN_22_EINT22__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(22) | 2) +#define MT8516_PIN_22_EINT22__FUNC_TSF_IN (MTK_PIN_NO(22) | 3) +#define MT8516_PIN_22_EINT22__FUNC_USB_DRVVBUS (MTK_PIN_NO(22) | 4) +#define MT8516_PIN_22_EINT22__FUNC_SPDIF_OUT (MTK_PIN_NO(22) | 5) +#define MT8516_PIN_22_EINT22__FUNC_NRE_C (MTK_PIN_NO(22) | 6) +#define MT8516_PIN_22_EINT22__FUNC_DBG_MON_B_12 (MTK_PIN_NO(22) | 7) + +#define MT8516_PIN_23_EINT23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define MT8516_PIN_23_EINT23__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(23) | 2) +#define MT8516_PIN_23_EINT23__FUNC_CLKM0 (MTK_PIN_NO(23) | 3) +#define MT8516_PIN_23_EINT23__FUNC_IR (MTK_PIN_NO(23) | 4) +#define MT8516_PIN_23_EINT23__FUNC_SPDIF_IN (MTK_PIN_NO(23) | 5) +#define MT8516_PIN_23_EINT23__FUNC_NDQS_C (MTK_PIN_NO(23) | 6) +#define MT8516_PIN_23_EINT23__FUNC_DBG_MON_B_13 (MTK_PIN_NO(23) | 7) + +#define MT8516_PIN_24_EINT24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define MT8516_PIN_24_EINT24__FUNC_ANT_SEL1 (MTK_PIN_NO(24) | 3) +#define MT8516_PIN_24_EINT24__FUNC_UCTS2 (MTK_PIN_NO(24) | 4) +#define MT8516_PIN_24_EINT24__FUNC_PWM_A (MTK_PIN_NO(24) | 5) +#define MT8516_PIN_24_EINT24__FUNC_I2S0_MCK (MTK_PIN_NO(24) | 6) +#define MT8516_PIN_24_EINT24__FUNC_DBG_MON_A_0 (MTK_PIN_NO(24) | 7) + +#define MT8516_PIN_25_EINT25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define MT8516_PIN_25_EINT25__FUNC_ANT_SEL0 (MTK_PIN_NO(25) | 3) +#define MT8516_PIN_25_EINT25__FUNC_URTS2 (MTK_PIN_NO(25) | 4) +#define MT8516_PIN_25_EINT25__FUNC_PWM_B (MTK_PIN_NO(25) | 5) +#define MT8516_PIN_25_EINT25__FUNC_I2S_8CH_MCK (MTK_PIN_NO(25) | 6) +#define MT8516_PIN_25_EINT25__FUNC_DBG_MON_A_1 (MTK_PIN_NO(25) | 7) + +#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(26) | 1) +#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(26) | 2) + +#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(27) | 1) +#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(27) | 2) + +#define MT8516_PIN_28_PWRAP_INT__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S0_MCK (MTK_PIN_NO(28) | 1) +#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S_8CH_MCK (MTK_PIN_NO(28) | 4) +#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S2_MCK (MTK_PIN_NO(28) | 5) +#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S3_MCK (MTK_PIN_NO(28) | 6) + +#define MT8516_PIN_29_PWRAP_SPI0_CK__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define MT8516_PIN_29_PWRAP_SPI0_CK__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(29) | 1) + +#define MT8516_PIN_30_PWRAP_SPI0_CSN__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) +#define MT8516_PIN_30_PWRAP_SPI0_CSN__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(30) | 1) + +#define MT8516_PIN_31_RTC32K_CK__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) +#define MT8516_PIN_31_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(31) | 1) + +#define MT8516_PIN_32_WATCHDOG__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) +#define MT8516_PIN_32_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(32) | 1) + +#define MT8516_PIN_33_SRCLKENA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define MT8516_PIN_33_SRCLKENA__FUNC_SRCLKENA0 (MTK_PIN_NO(33) | 1) + +#define MT8516_PIN_34_URXD2__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define MT8516_PIN_34_URXD2__FUNC_URXD2 (MTK_PIN_NO(34) | 1) +#define MT8516_PIN_34_URXD2__FUNC_UTXD2 (MTK_PIN_NO(34) | 3) +#define MT8516_PIN_34_URXD2__FUNC_DBG_SCL (MTK_PIN_NO(34) | 4) +#define MT8516_PIN_34_URXD2__FUNC_I2S2_MCK (MTK_PIN_NO(34) | 6) +#define MT8516_PIN_34_URXD2__FUNC_DBG_MON_B_0 (MTK_PIN_NO(34) | 7) + +#define MT8516_PIN_35_UTXD2__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define MT8516_PIN_35_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(35) | 1) +#define MT8516_PIN_35_UTXD2__FUNC_URXD2 (MTK_PIN_NO(35) | 3) +#define MT8516_PIN_35_UTXD2__FUNC_DBG_SDA (MTK_PIN_NO(35) | 4) +#define MT8516_PIN_35_UTXD2__FUNC_I2S3_MCK (MTK_PIN_NO(35) | 6) +#define MT8516_PIN_35_UTXD2__FUNC_DBG_MON_B_1 (MTK_PIN_NO(35) | 7) + +#define MT8516_PIN_36_MRG_CLK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define MT8516_PIN_36_MRG_CLK__FUNC_MRG_CLK (MTK_PIN_NO(36) | 1) +#define MT8516_PIN_36_MRG_CLK__FUNC_I2S0_BCK (MTK_PIN_NO(36) | 3) +#define MT8516_PIN_36_MRG_CLK__FUNC_I2S3_BCK (MTK_PIN_NO(36) | 4) +#define MT8516_PIN_36_MRG_CLK__FUNC_PCM0_CLK (MTK_PIN_NO(36) | 5) +#define MT8516_PIN_36_MRG_CLK__FUNC_IR (MTK_PIN_NO(36) | 6) +#define MT8516_PIN_36_MRG_CLK__FUNC_DBG_MON_A_2 (MTK_PIN_NO(36) | 7) + +#define MT8516_PIN_37_MRG_SYNC__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define MT8516_PIN_37_MRG_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(37) | 1) +#define MT8516_PIN_37_MRG_SYNC__FUNC_I2S0_LRCK (MTK_PIN_NO(37) | 3) +#define MT8516_PIN_37_MRG_SYNC__FUNC_I2S3_LRCK (MTK_PIN_NO(37) | 4) +#define MT8516_PIN_37_MRG_SYNC__FUNC_PCM0_SYNC (MTK_PIN_NO(37) | 5) +#define MT8516_PIN_37_MRG_SYNC__FUNC_EXT_COL (MTK_PIN_NO(37) | 6) +#define MT8516_PIN_37_MRG_SYNC__FUNC_DBG_MON_A_3 (MTK_PIN_NO(37) | 7) + +#define MT8516_PIN_38_MRG_DI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) +#define MT8516_PIN_38_MRG_DI__FUNC_MRG_DI (MTK_PIN_NO(38) | 1) +#define MT8516_PIN_38_MRG_DI__FUNC_I2S0_DI (MTK_PIN_NO(38) | 3) +#define MT8516_PIN_38_MRG_DI__FUNC_I2S3_DO (MTK_PIN_NO(38) | 4) +#define MT8516_PIN_38_MRG_DI__FUNC_PCM0_DI (MTK_PIN_NO(38) | 5) +#define MT8516_PIN_38_MRG_DI__FUNC_EXT_MDIO (MTK_PIN_NO(38) | 6) +#define MT8516_PIN_38_MRG_DI__FUNC_DBG_MON_A_4 (MTK_PIN_NO(38) | 7) + +#define MT8516_PIN_39_MRG_DO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define MT8516_PIN_39_MRG_DO__FUNC_MRG_DO (MTK_PIN_NO(39) | 1) +#define MT8516_PIN_39_MRG_DO__FUNC_I2S0_MCK (MTK_PIN_NO(39) | 3) +#define MT8516_PIN_39_MRG_DO__FUNC_I2S3_MCK (MTK_PIN_NO(39) | 4) +#define MT8516_PIN_39_MRG_DO__FUNC_PCM0_DO (MTK_PIN_NO(39) | 5) +#define MT8516_PIN_39_MRG_DO__FUNC_EXT_MDC (MTK_PIN_NO(39) | 6) +#define MT8516_PIN_39_MRG_DO__FUNC_DBG_MON_A_5 (MTK_PIN_NO(39) | 7) + +#define MT8516_PIN_40_KPROW0__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define MT8516_PIN_40_KPROW0__FUNC_KPROW0 (MTK_PIN_NO(40) | 1) +#define MT8516_PIN_40_KPROW0__FUNC_DBG_MON_B_4 (MTK_PIN_NO(40) | 7) + +#define MT8516_PIN_41_KPROW1__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define MT8516_PIN_41_KPROW1__FUNC_KPROW1 (MTK_PIN_NO(41) | 1) +#define MT8516_PIN_41_KPROW1__FUNC_IDDIG (MTK_PIN_NO(41) | 2) +#define MT8516_PIN_41_KPROW1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(41) | 3) +#define MT8516_PIN_41_KPROW1__FUNC_DBG_MON_B_5 (MTK_PIN_NO(41) | 7) + +#define MT8516_PIN_42_KPCOL0__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define MT8516_PIN_42_KPCOL0__FUNC_KPCOL0 (MTK_PIN_NO(42) | 1) +#define MT8516_PIN_42_KPCOL0__FUNC_DBG_MON_B_6 (MTK_PIN_NO(42) | 7) + +#define MT8516_PIN_43_KPCOL1__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define MT8516_PIN_43_KPCOL1__FUNC_KPCOL1 (MTK_PIN_NO(43) | 1) +#define MT8516_PIN_43_KPCOL1__FUNC_USB_DRVVBUS (MTK_PIN_NO(43) | 2) +#define MT8516_PIN_43_KPCOL1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(43) | 3) +#define MT8516_PIN_43_KPCOL1__FUNC_TSF_IN (MTK_PIN_NO(43) | 4) +#define MT8516_PIN_43_KPCOL1__FUNC_DBG_MON_B_7 (MTK_PIN_NO(43) | 7) + +#define MT8516_PIN_44_JTMS__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define MT8516_PIN_44_JTMS__FUNC_JTMS (MTK_PIN_NO(44) | 1) +#define MT8516_PIN_44_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(44) | 2) +#define MT8516_PIN_44_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(44) | 3) +#define MT8516_PIN_44_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(44) | 5) +#define MT8516_PIN_44_JTMS__FUNC_UDI_TMS_XI (MTK_PIN_NO(44) | 6) + +#define MT8516_PIN_45_JTCK__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define MT8516_PIN_45_JTCK__FUNC_JTCK (MTK_PIN_NO(45) | 1) +#define MT8516_PIN_45_JTCK__FUNC_CONN_MCU_TCK (MTK_PIN_NO(45) | 2) +#define MT8516_PIN_45_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(45) | 3) + +#define MT8516_PIN_46_JTDI__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define MT8516_PIN_46_JTDI__FUNC_JTDI (MTK_PIN_NO(46) | 1) +#define MT8516_PIN_46_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(46) | 2) + +#define MT8516_PIN_47_JTDO__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define MT8516_PIN_47_JTDO__FUNC_JTDO (MTK_PIN_NO(47) | 1) +#define MT8516_PIN_47_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(47) | 2) + +#define MT8516_PIN_48_SPI_CS__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define MT8516_PIN_48_SPI_CS__FUNC_SPI_CSB (MTK_PIN_NO(48) | 1) +#define MT8516_PIN_48_SPI_CS__FUNC_I2S0_DI (MTK_PIN_NO(48) | 3) +#define MT8516_PIN_48_SPI_CS__FUNC_I2S2_BCK (MTK_PIN_NO(48) | 4) +#define MT8516_PIN_48_SPI_CS__FUNC_DBG_MON_A_23 (MTK_PIN_NO(48) | 7) + +#define MT8516_PIN_49_SPI_CK__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define MT8516_PIN_49_SPI_CK__FUNC_SPI_CLK (MTK_PIN_NO(49) | 1) +#define MT8516_PIN_49_SPI_CK__FUNC_I2S0_LRCK (MTK_PIN_NO(49) | 3) +#define MT8516_PIN_49_SPI_CK__FUNC_I2S2_DI (MTK_PIN_NO(49) | 4) +#define MT8516_PIN_49_SPI_CK__FUNC_DBG_MON_A_24 (MTK_PIN_NO(49) | 7) + +#define MT8516_PIN_50_SPI_MI__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) +#define MT8516_PIN_50_SPI_MI__FUNC_SPI_MI (MTK_PIN_NO(50) | 1) +#define MT8516_PIN_50_SPI_MI__FUNC_SPI_MO (MTK_PIN_NO(50) | 2) +#define MT8516_PIN_50_SPI_MI__FUNC_I2S0_BCK (MTK_PIN_NO(50) | 3) +#define MT8516_PIN_50_SPI_MI__FUNC_I2S2_LRCK (MTK_PIN_NO(50) | 4) +#define MT8516_PIN_50_SPI_MI__FUNC_DBG_MON_A_25 (MTK_PIN_NO(50) | 7) + +#define MT8516_PIN_51_SPI_MO__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) +#define MT8516_PIN_51_SPI_MO__FUNC_SPI_MO (MTK_PIN_NO(51) | 1) +#define MT8516_PIN_51_SPI_MO__FUNC_SPI_MI (MTK_PIN_NO(51) | 2) +#define MT8516_PIN_51_SPI_MO__FUNC_I2S0_MCK (MTK_PIN_NO(51) | 3) +#define MT8516_PIN_51_SPI_MO__FUNC_I2S2_MCK (MTK_PIN_NO(51) | 4) +#define MT8516_PIN_51_SPI_MO__FUNC_DBG_MON_A_26 (MTK_PIN_NO(51) | 7) + +#define MT8516_PIN_52_SDA1__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) +#define MT8516_PIN_52_SDA1__FUNC_SDA1_0 (MTK_PIN_NO(52) | 1) + +#define MT8516_PIN_53_SCL1__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define MT8516_PIN_53_SCL1__FUNC_SCL1_0 (MTK_PIN_NO(53) | 1) + +#define MT8516_PIN_54_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define MT8516_PIN_54_GPIO54__FUNC_PWM_B (MTK_PIN_NO(54) | 2) +#define MT8516_PIN_54_GPIO54__FUNC_DBG_MON_B_2 (MTK_PIN_NO(54) | 7) + +#define MT8516_PIN_55_I2S_DATA_IN__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S0_DI (MTK_PIN_NO(55) | 1) +#define MT8516_PIN_55_I2S_DATA_IN__FUNC_UCTS0 (MTK_PIN_NO(55) | 2) +#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S3_DO (MTK_PIN_NO(55) | 3) +#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(55) | 4) +#define MT8516_PIN_55_I2S_DATA_IN__FUNC_PWM_A (MTK_PIN_NO(55) | 5) +#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S2_BCK (MTK_PIN_NO(55) | 6) +#define MT8516_PIN_55_I2S_DATA_IN__FUNC_DBG_MON_A_28 (MTK_PIN_NO(55) | 7) + +#define MT8516_PIN_56_I2S_LRCK__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(56) | 1) +#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S3_LRCK (MTK_PIN_NO(56) | 3) +#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(56) | 4) +#define MT8516_PIN_56_I2S_LRCK__FUNC_PWM_B (MTK_PIN_NO(56) | 5) +#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S2_DI (MTK_PIN_NO(56) | 6) +#define MT8516_PIN_56_I2S_LRCK__FUNC_DBG_MON_A_29 (MTK_PIN_NO(56) | 7) + +#define MT8516_PIN_57_I2S_BCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT8516_PIN_57_I2S_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(57) | 1) +#define MT8516_PIN_57_I2S_BCK__FUNC_URTS0 (MTK_PIN_NO(57) | 2) +#define MT8516_PIN_57_I2S_BCK__FUNC_I2S3_BCK (MTK_PIN_NO(57) | 3) +#define MT8516_PIN_57_I2S_BCK__FUNC_I2S_8CH_BCK (MTK_PIN_NO(57) | 4) +#define MT8516_PIN_57_I2S_BCK__FUNC_PWM_C (MTK_PIN_NO(57) | 5) +#define MT8516_PIN_57_I2S_BCK__FUNC_I2S2_LRCK (MTK_PIN_NO(57) | 6) +#define MT8516_PIN_57_I2S_BCK__FUNC_DBG_MON_A_30 (MTK_PIN_NO(57) | 7) + +#define MT8516_PIN_58_SDA0__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT8516_PIN_58_SDA0__FUNC_SDA0_0 (MTK_PIN_NO(58) | 1) + +#define MT8516_PIN_59_SCL0__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) +#define MT8516_PIN_59_SCL0__FUNC_SCL0_0 (MTK_PIN_NO(59) | 1) + +#define MT8516_PIN_60_SDA2__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) +#define MT8516_PIN_60_SDA2__FUNC_SDA2_0 (MTK_PIN_NO(60) | 1) +#define MT8516_PIN_60_SDA2__FUNC_PWM_B (MTK_PIN_NO(60) | 2) + +#define MT8516_PIN_61_SCL2__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) +#define MT8516_PIN_61_SCL2__FUNC_SCL2_0 (MTK_PIN_NO(61) | 1) +#define MT8516_PIN_61_SCL2__FUNC_PWM_C (MTK_PIN_NO(61) | 2) + +#define MT8516_PIN_62_URXD0__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) +#define MT8516_PIN_62_URXD0__FUNC_URXD0 (MTK_PIN_NO(62) | 1) +#define MT8516_PIN_62_URXD0__FUNC_UTXD0 (MTK_PIN_NO(62) | 2) + +#define MT8516_PIN_63_UTXD0__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) +#define MT8516_PIN_63_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(63) | 1) +#define MT8516_PIN_63_UTXD0__FUNC_URXD0 (MTK_PIN_NO(63) | 2) + +#define MT8516_PIN_64_URXD1__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) +#define MT8516_PIN_64_URXD1__FUNC_URXD1 (MTK_PIN_NO(64) | 1) +#define MT8516_PIN_64_URXD1__FUNC_UTXD1 (MTK_PIN_NO(64) | 2) +#define MT8516_PIN_64_URXD1__FUNC_DBG_MON_A_27 (MTK_PIN_NO(64) | 7) + +#define MT8516_PIN_65_UTXD1__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) +#define MT8516_PIN_65_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(65) | 1) +#define MT8516_PIN_65_UTXD1__FUNC_URXD1 (MTK_PIN_NO(65) | 2) +#define MT8516_PIN_65_UTXD1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(65) | 7) + +#define MT8516_PIN_68_MSDC2_CMD__FUNC_GPIO68 (MTK_PIN_NO(68) | 0) +#define MT8516_PIN_68_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(68) | 1) +#define MT8516_PIN_68_MSDC2_CMD__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(68) | 2) +#define MT8516_PIN_68_MSDC2_CMD__FUNC_SDA1_0 (MTK_PIN_NO(68) | 3) +#define MT8516_PIN_68_MSDC2_CMD__FUNC_USB_SDA (MTK_PIN_NO(68) | 5) +#define MT8516_PIN_68_MSDC2_CMD__FUNC_I2S3_BCK (MTK_PIN_NO(68) | 6) +#define MT8516_PIN_68_MSDC2_CMD__FUNC_DBG_MON_B_15 (MTK_PIN_NO(68) | 7) + +#define MT8516_PIN_69_MSDC2_CLK__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) +#define MT8516_PIN_69_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(69) | 1) +#define MT8516_PIN_69_MSDC2_CLK__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(69) | 2) +#define MT8516_PIN_69_MSDC2_CLK__FUNC_SCL1_0 (MTK_PIN_NO(69) | 3) +#define MT8516_PIN_69_MSDC2_CLK__FUNC_USB_SCL (MTK_PIN_NO(69) | 5) +#define MT8516_PIN_69_MSDC2_CLK__FUNC_I2S3_LRCK (MTK_PIN_NO(69) | 6) +#define MT8516_PIN_69_MSDC2_CLK__FUNC_DBG_MON_B_16 (MTK_PIN_NO(69) | 7) + +#define MT8516_PIN_70_MSDC2_DAT0__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) +#define MT8516_PIN_70_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(70) | 1) +#define MT8516_PIN_70_MSDC2_DAT0__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(70) | 2) +#define MT8516_PIN_70_MSDC2_DAT0__FUNC_UTXD0 (MTK_PIN_NO(70) | 5) +#define MT8516_PIN_70_MSDC2_DAT0__FUNC_I2S3_DO (MTK_PIN_NO(70) | 6) +#define MT8516_PIN_70_MSDC2_DAT0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(70) | 7) + +#define MT8516_PIN_71_MSDC2_DAT1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) +#define MT8516_PIN_71_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(71) | 1) +#define MT8516_PIN_71_MSDC2_DAT1__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(71) | 2) +#define MT8516_PIN_71_MSDC2_DAT1__FUNC_PWM_A (MTK_PIN_NO(71) | 3) +#define MT8516_PIN_71_MSDC2_DAT1__FUNC_I2S3_MCK (MTK_PIN_NO(71) | 4) +#define MT8516_PIN_71_MSDC2_DAT1__FUNC_URXD0 (MTK_PIN_NO(71) | 5) +#define MT8516_PIN_71_MSDC2_DAT1__FUNC_PWM_B (MTK_PIN_NO(71) | 6) +#define MT8516_PIN_71_MSDC2_DAT1__FUNC_DBG_MON_B_18 (MTK_PIN_NO(71) | 7) + +#define MT8516_PIN_72_MSDC2_DAT2__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define MT8516_PIN_72_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(72) | 1) +#define MT8516_PIN_72_MSDC2_DAT2__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(72) | 2) +#define MT8516_PIN_72_MSDC2_DAT2__FUNC_SDA2_0 (MTK_PIN_NO(72) | 3) +#define MT8516_PIN_72_MSDC2_DAT2__FUNC_UTXD1 (MTK_PIN_NO(72) | 5) +#define MT8516_PIN_72_MSDC2_DAT2__FUNC_PWM_C (MTK_PIN_NO(72) | 6) +#define MT8516_PIN_72_MSDC2_DAT2__FUNC_DBG_MON_B_19 (MTK_PIN_NO(72) | 7) + +#define MT8516_PIN_73_MSDC2_DAT3__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define MT8516_PIN_73_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(73) | 1) +#define MT8516_PIN_73_MSDC2_DAT3__FUNC_I2S_8CH_BCK (MTK_PIN_NO(73) | 2) +#define MT8516_PIN_73_MSDC2_DAT3__FUNC_SCL2_0 (MTK_PIN_NO(73) | 3) +#define MT8516_PIN_73_MSDC2_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(73) | 4) +#define MT8516_PIN_73_MSDC2_DAT3__FUNC_URXD1 (MTK_PIN_NO(73) | 5) +#define MT8516_PIN_73_MSDC2_DAT3__FUNC_PWM_A (MTK_PIN_NO(73) | 6) +#define MT8516_PIN_73_MSDC2_DAT3__FUNC_DBG_MON_B_20 (MTK_PIN_NO(73) | 7) + +#define MT8516_PIN_74_TDN3__FUNC_GPI74 (MTK_PIN_NO(74) | 0) +#define MT8516_PIN_74_TDN3__FUNC_TDN3 (MTK_PIN_NO(74) | 1) + +#define MT8516_PIN_75_TDP3__FUNC_GPI75 (MTK_PIN_NO(75) | 0) +#define MT8516_PIN_75_TDP3__FUNC_TDP3 (MTK_PIN_NO(75) | 1) + +#define MT8516_PIN_76_TDN2__FUNC_GPI76 (MTK_PIN_NO(76) | 0) +#define MT8516_PIN_76_TDN2__FUNC_TDN2 (MTK_PIN_NO(76) | 1) + +#define MT8516_PIN_77_TDP2__FUNC_GPI77 (MTK_PIN_NO(77) | 0) +#define MT8516_PIN_77_TDP2__FUNC_TDP2 (MTK_PIN_NO(77) | 1) + +#define MT8516_PIN_78_TCN__FUNC_GPI78 (MTK_PIN_NO(78) | 0) +#define MT8516_PIN_78_TCN__FUNC_TCN (MTK_PIN_NO(78) | 1) + +#define MT8516_PIN_79_TCP__FUNC_GPI79 (MTK_PIN_NO(79) | 0) +#define MT8516_PIN_79_TCP__FUNC_TCP (MTK_PIN_NO(79) | 1) + +#define MT8516_PIN_80_TDN1__FUNC_GPI80 (MTK_PIN_NO(80) | 0) +#define MT8516_PIN_80_TDN1__FUNC_TDN1 (MTK_PIN_NO(80) | 1) + +#define MT8516_PIN_81_TDP1__FUNC_GPI81 (MTK_PIN_NO(81) | 0) +#define MT8516_PIN_81_TDP1__FUNC_TDP1 (MTK_PIN_NO(81) | 1) + +#define MT8516_PIN_82_TDN0__FUNC_GPI82 (MTK_PIN_NO(82) | 0) +#define MT8516_PIN_82_TDN0__FUNC_TDN0 (MTK_PIN_NO(82) | 1) + +#define MT8516_PIN_83_TDP0__FUNC_GPI83 (MTK_PIN_NO(83) | 0) +#define MT8516_PIN_83_TDP0__FUNC_TDP0 (MTK_PIN_NO(83) | 1) + +#define MT8516_PIN_84_RDN0__FUNC_GPI84 (MTK_PIN_NO(84) | 0) +#define MT8516_PIN_84_RDN0__FUNC_RDN0 (MTK_PIN_NO(84) | 1) + +#define MT8516_PIN_85_RDP0__FUNC_GPI85 (MTK_PIN_NO(85) | 0) +#define MT8516_PIN_85_RDP0__FUNC_RDP0 (MTK_PIN_NO(85) | 1) + +#define MT8516_PIN_86_RDN1__FUNC_GPI86 (MTK_PIN_NO(86) | 0) +#define MT8516_PIN_86_RDN1__FUNC_RDN1 (MTK_PIN_NO(86) | 1) + +#define MT8516_PIN_87_RDP1__FUNC_GPI87 (MTK_PIN_NO(87) | 0) +#define MT8516_PIN_87_RDP1__FUNC_RDP1 (MTK_PIN_NO(87) | 1) + +#define MT8516_PIN_88_RCN__FUNC_GPI88 (MTK_PIN_NO(88) | 0) +#define MT8516_PIN_88_RCN__FUNC_RCN (MTK_PIN_NO(88) | 1) + +#define MT8516_PIN_89_RCP__FUNC_GPI89 (MTK_PIN_NO(89) | 0) +#define MT8516_PIN_89_RCP__FUNC_RCP (MTK_PIN_NO(89) | 1) + +#define MT8516_PIN_90_RDN2__FUNC_GPI90 (MTK_PIN_NO(90) | 0) +#define MT8516_PIN_90_RDN2__FUNC_RDN2 (MTK_PIN_NO(90) | 1) +#define MT8516_PIN_90_RDN2__FUNC_CMDAT8 (MTK_PIN_NO(90) | 2) + +#define MT8516_PIN_91_RDP2__FUNC_GPI91 (MTK_PIN_NO(91) | 0) +#define MT8516_PIN_91_RDP2__FUNC_RDP2 (MTK_PIN_NO(91) | 1) +#define MT8516_PIN_91_RDP2__FUNC_CMDAT9 (MTK_PIN_NO(91) | 2) + +#define MT8516_PIN_92_RDN3__FUNC_GPI92 (MTK_PIN_NO(92) | 0) +#define MT8516_PIN_92_RDN3__FUNC_RDN3 (MTK_PIN_NO(92) | 1) +#define MT8516_PIN_92_RDN3__FUNC_CMDAT4 (MTK_PIN_NO(92) | 2) + +#define MT8516_PIN_93_RDP3__FUNC_GPI93 (MTK_PIN_NO(93) | 0) +#define MT8516_PIN_93_RDP3__FUNC_RDP3 (MTK_PIN_NO(93) | 1) +#define MT8516_PIN_93_RDP3__FUNC_CMDAT5 (MTK_PIN_NO(93) | 2) + +#define MT8516_PIN_94_RCN_A__FUNC_GPI94 (MTK_PIN_NO(94) | 0) +#define MT8516_PIN_94_RCN_A__FUNC_RCN_A (MTK_PIN_NO(94) | 1) +#define MT8516_PIN_94_RCN_A__FUNC_CMDAT6 (MTK_PIN_NO(94) | 2) + +#define MT8516_PIN_95_RCP_A__FUNC_GPI95 (MTK_PIN_NO(95) | 0) +#define MT8516_PIN_95_RCP_A__FUNC_RCP_A (MTK_PIN_NO(95) | 1) +#define MT8516_PIN_95_RCP_A__FUNC_CMDAT7 (MTK_PIN_NO(95) | 2) + +#define MT8516_PIN_96_RDN1_A__FUNC_GPI96 (MTK_PIN_NO(96) | 0) +#define MT8516_PIN_96_RDN1_A__FUNC_RDN1_A (MTK_PIN_NO(96) | 1) +#define MT8516_PIN_96_RDN1_A__FUNC_CMDAT2 (MTK_PIN_NO(96) | 2) +#define MT8516_PIN_96_RDN1_A__FUNC_CMCSD2 (MTK_PIN_NO(96) | 3) + +#define MT8516_PIN_97_RDP1_A__FUNC_GPI97 (MTK_PIN_NO(97) | 0) +#define MT8516_PIN_97_RDP1_A__FUNC_RDP1_A (MTK_PIN_NO(97) | 1) +#define MT8516_PIN_97_RDP1_A__FUNC_CMDAT3 (MTK_PIN_NO(97) | 2) +#define MT8516_PIN_97_RDP1_A__FUNC_CMCSD3 (MTK_PIN_NO(97) | 3) + +#define MT8516_PIN_98_RDN0_A__FUNC_GPI98 (MTK_PIN_NO(98) | 0) +#define MT8516_PIN_98_RDN0_A__FUNC_RDN0_A (MTK_PIN_NO(98) | 1) +#define MT8516_PIN_98_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(98) | 2) + +#define MT8516_PIN_99_RDP0_A__FUNC_GPI99 (MTK_PIN_NO(99) | 0) +#define MT8516_PIN_99_RDP0_A__FUNC_RDP0_A (MTK_PIN_NO(99) | 1) +#define MT8516_PIN_99_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(99) | 2) + +#define MT8516_PIN_100_CMDAT0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) +#define MT8516_PIN_100_CMDAT0__FUNC_CMDAT0 (MTK_PIN_NO(100) | 1) +#define MT8516_PIN_100_CMDAT0__FUNC_CMCSD0 (MTK_PIN_NO(100) | 2) +#define MT8516_PIN_100_CMDAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(100) | 3) +#define MT8516_PIN_100_CMDAT0__FUNC_TDM_RX_MCK (MTK_PIN_NO(100) | 5) +#define MT8516_PIN_100_CMDAT0__FUNC_DBG_MON_B_21 (MTK_PIN_NO(100) | 7) + +#define MT8516_PIN_101_CMDAT1__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define MT8516_PIN_101_CMDAT1__FUNC_CMDAT1 (MTK_PIN_NO(101) | 1) +#define MT8516_PIN_101_CMDAT1__FUNC_CMCSD1 (MTK_PIN_NO(101) | 2) +#define MT8516_PIN_101_CMDAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(101) | 3) +#define MT8516_PIN_101_CMDAT1__FUNC_CMFLASH (MTK_PIN_NO(101) | 4) +#define MT8516_PIN_101_CMDAT1__FUNC_TDM_RX_BCK (MTK_PIN_NO(101) | 5) +#define MT8516_PIN_101_CMDAT1__FUNC_DBG_MON_B_22 (MTK_PIN_NO(101) | 7) + +#define MT8516_PIN_102_CMMCLK__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define MT8516_PIN_102_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(102) | 1) +#define MT8516_PIN_102_CMMCLK__FUNC_ANT_SEL4 (MTK_PIN_NO(102) | 3) +#define MT8516_PIN_102_CMMCLK__FUNC_TDM_RX_LRCK (MTK_PIN_NO(102) | 5) +#define MT8516_PIN_102_CMMCLK__FUNC_DBG_MON_B_23 (MTK_PIN_NO(102) | 7) + +#define MT8516_PIN_103_CMPCLK__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define MT8516_PIN_103_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(103) | 1) +#define MT8516_PIN_103_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(103) | 2) +#define MT8516_PIN_103_CMPCLK__FUNC_ANT_SEL5 (MTK_PIN_NO(103) | 3) +#define MT8516_PIN_103_CMPCLK__FUNC_TDM_RX_DI (MTK_PIN_NO(103) | 5) +#define MT8516_PIN_103_CMPCLK__FUNC_DBG_MON_B_24 (MTK_PIN_NO(103) | 7) + +#define MT8516_PIN_104_MSDC1_CMD__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define MT8516_PIN_104_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(104) | 1) +#define MT8516_PIN_104_MSDC1_CMD__FUNC_SQICS (MTK_PIN_NO(104) | 4) +#define MT8516_PIN_104_MSDC1_CMD__FUNC_DBG_MON_B_25 (MTK_PIN_NO(104) | 7) + +#define MT8516_PIN_105_MSDC1_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define MT8516_PIN_105_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(105) | 1) +#define MT8516_PIN_105_MSDC1_CLK__FUNC_SQISO (MTK_PIN_NO(105) | 4) +#define MT8516_PIN_105_MSDC1_CLK__FUNC_DBG_MON_B_26 (MTK_PIN_NO(105) | 7) + +#define MT8516_PIN_106_MSDC1_DAT0__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define MT8516_PIN_106_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(106) | 1) +#define MT8516_PIN_106_MSDC1_DAT0__FUNC_SQISI (MTK_PIN_NO(106) | 4) +#define MT8516_PIN_106_MSDC1_DAT0__FUNC_DBG_MON_B_27 (MTK_PIN_NO(106) | 7) + +#define MT8516_PIN_107_MSDC1_DAT1__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define MT8516_PIN_107_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(107) | 1) +#define MT8516_PIN_107_MSDC1_DAT1__FUNC_SQIWP (MTK_PIN_NO(107) | 4) +#define MT8516_PIN_107_MSDC1_DAT1__FUNC_DBG_MON_B_28 (MTK_PIN_NO(107) | 7) + +#define MT8516_PIN_108_MSDC1_DAT2__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define MT8516_PIN_108_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(108) | 1) +#define MT8516_PIN_108_MSDC1_DAT2__FUNC_SQIRST (MTK_PIN_NO(108) | 4) +#define MT8516_PIN_108_MSDC1_DAT2__FUNC_DBG_MON_B_29 (MTK_PIN_NO(108) | 7) + +#define MT8516_PIN_109_MSDC1_DAT3__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define MT8516_PIN_109_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(109) | 1) +#define MT8516_PIN_109_MSDC1_DAT3__FUNC_SQICK (MTK_PIN_NO(109) | 4) +#define MT8516_PIN_109_MSDC1_DAT3__FUNC_DBG_MON_B_30 (MTK_PIN_NO(109) | 7) + +#define MT8516_PIN_110_MSDC0_DAT7__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define MT8516_PIN_110_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(110) | 1) +#define MT8516_PIN_110_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(110) | 4) + +#define MT8516_PIN_111_MSDC0_DAT6__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define MT8516_PIN_111_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(111) | 1) +#define MT8516_PIN_111_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(111) | 4) + +#define MT8516_PIN_112_MSDC0_DAT5__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define MT8516_PIN_112_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(112) | 1) +#define MT8516_PIN_112_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(112) | 4) + +#define MT8516_PIN_113_MSDC0_DAT4__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define MT8516_PIN_113_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(113) | 1) +#define MT8516_PIN_113_MSDC0_DAT4__FUNC_NLD3 (MTK_PIN_NO(113) | 4) + +#define MT8516_PIN_114_MSDC0_RSTB__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define MT8516_PIN_114_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(114) | 1) +#define MT8516_PIN_114_MSDC0_RSTB__FUNC_NLD0 (MTK_PIN_NO(114) | 4) + +#define MT8516_PIN_115_MSDC0_CMD__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define MT8516_PIN_115_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(115) | 1) +#define MT8516_PIN_115_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(115) | 4) + +#define MT8516_PIN_116_MSDC0_CLK__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define MT8516_PIN_116_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(116) | 1) +#define MT8516_PIN_116_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(116) | 4) + +#define MT8516_PIN_117_MSDC0_DAT3__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define MT8516_PIN_117_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(117) | 1) +#define MT8516_PIN_117_MSDC0_DAT3__FUNC_NLD1 (MTK_PIN_NO(117) | 4) + +#define MT8516_PIN_118_MSDC0_DAT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define MT8516_PIN_118_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(118) | 1) +#define MT8516_PIN_118_MSDC0_DAT2__FUNC_NLD5 (MTK_PIN_NO(118) | 4) + +#define MT8516_PIN_119_MSDC0_DAT1__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define MT8516_PIN_119_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(119) | 1) +#define MT8516_PIN_119_MSDC0_DAT1__FUNC_NLD8 (MTK_PIN_NO(119) | 4) + +#define MT8516_PIN_120_MSDC0_DAT0__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define MT8516_PIN_120_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(120) | 1) +#define MT8516_PIN_120_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(120) | 4) +#define MT8516_PIN_120_MSDC0_DAT0__FUNC_NLD2 (MTK_PIN_NO(120) | 5) + +#endif /* __DTS_MT8516_PINFUNC_H */ diff --git a/sys/gnu/dts/arm64/mediatek/mt8516-pumpkin.dts b/sys/gnu/dts/arm64/mediatek/mt8516-pumpkin.dts new file mode 100644 index 000000000000..cce642c53812 --- /dev/null +++ b/sys/gnu/dts/arm64/mediatek/mt8516-pumpkin.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 BayLibre, SAS. + * Author: Fabien Parent <fparent@baylibre.com> + */ + +/dts-v1/; + +#include "mt8516.dtsi" +#include "pumpkin-common.dtsi" + +/ { + model = "Pumpkin MT8516"; + compatible = "mediatek,mt8516"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; +}; diff --git a/sys/gnu/dts/arm64/mediatek/mt8516.dtsi b/sys/gnu/dts/arm64/mediatek/mt8516.dtsi new file mode 100644 index 000000000000..2f8adf042195 --- /dev/null +++ b/sys/gnu/dts/arm64/mediatek/mt8516.dtsi @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 MediaTek Inc. + * Copyright (c) 2019 BayLibre, SAS. + * Author: Fabien Parent <fparent@baylibre.com> + */ + +#include <dt-bindings/clock/mt8516-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy.h> + +#include "mt8516-pinfunc.h" + +/ { + compatible = "mediatek,mt8516"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + opp-598000000 { + opp-hz = /bits/ 64 <598000000>; + opp-microvolt = <1150000>; + }; + opp-747500000 { + opp-hz = /bits/ 64 <747500000>; + opp-microvolt = <1150000>; + }; + opp-1040000000 { + opp-hz = /bits/ 64 <1040000000>; + opp-microvolt = <1200000>; + }; + opp-1196000000 { + opp-hz = /bits/ 64 <1196000000>; + opp-microvolt = <1250000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1300000>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0>; + enable-method = "psci"; + cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>, + <&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>; + clocks = <&infracfg CLK_IFR_MUX1_SEL>, + <&topckgen CLK_TOP_MAINPLL_D2>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x1>; + enable-method = "psci"; + cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>, + <&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>; + clocks = <&infracfg CLK_IFR_MUX1_SEL>, + <&topckgen CLK_TOP_MAINPLL_D2>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x2>; + enable-method = "psci"; + cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>, + <&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>; + clocks = <&infracfg CLK_IFR_MUX1_SEL>, + <&topckgen CLK_TOP_MAINPLL_D2>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x3>; + enable-method = "psci"; + cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>, + <&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>; + clocks = <&infracfg CLK_IFR_MUX1_SEL>, + <&topckgen CLK_TOP_MAINPLL_D2>; + clock-names = "cpu", "intermediate", "armpll"; + operating-points-v2 = <&cluster0_opp>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + entry-latency-us = <600>; + exit-latency-us = <600>; + min-residency-us = <1200>; + arm,psci-suspend-param = <0x0010000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + entry-latency-us = <800>; + exit-latency-us = <1000>; + min-residency-us = <2000>; + arm,psci-suspend-param = <0x2010000>; + }; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + clk26m: clk26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: clk32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "clk32k"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 128 KiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_reserved: secmon@43000000 { + no-map; + reg = <0 0x43000000 0 0x20000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + topckgen: topckgen@10000000 { + compatible = "mediatek,mt8516-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: infracfg@10001000 { + compatible = "mediatek,mt8516-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + apmixedsys: apmixedsys@10018000 { + compatible = "mediatek,mt8516-apmixedsys", "syscon"; + reg = <0 0x10018000 0 0x710>; + #clock-cells = <1>; + }; + + toprgu: toprgu@10007000 { + compatible = "mediatek,mt8516-wdt", + "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>; + #reset-cells = <1>; + }; + + timer: timer@10008000 { + compatible = "mediatek,mt8516-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10008000 0 0x1000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_CLK26M_D2>, + <&topckgen CLK_TOP_APXGPT>; + clock-names = "clk13m", "bus"; + }; + + syscfg_pctl: syscfg-pctl@10005000 { + compatible = "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + + pio: pinctrl@1000b000 { + compatible = "mediatek,mt8516-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + }; + + pwrap: pwrap@1000f000 { + compatible = "mediatek,mt8516-pwrap"; + reg = <0 0x1000f000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_PMICWRAP_26M>, + <&topckgen CLK_TOP_PMICWRAP_AP>; + clock-names = "spi", "wrap"; + }; + + sysirq: interrupt-controller@10200620 { + compatible = "mediatek,mt8516-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200620 0 0x20>; + }; + + gic: interrupt-controller@10310000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x10310000 0 0x1000>, + <0 0x10320000 0 0x1000>, + <0 0x10340000 0 0x2000>, + <0 0x10360000 0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + uart0: serial@11005000 { + compatible = "mediatek,mt8516-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UART0_SEL>, + <&topckgen CLK_TOP_UART0>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11006000 { + compatible = "mediatek,mt8516-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11006000 0 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UART1_SEL>, + <&topckgen CLK_TOP_UART1>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11007000 { + compatible = "mediatek,mt8516-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11007000 0 0x1000>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UART2_SEL>, + <&topckgen CLK_TOP_UART2>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + i2c0: i2c@11009000 { + compatible = "mediatek,mt8516-i2c", + "mediatek,mt2712-i2c"; + reg = <0 0x11009000 0 0x90>, + <0 0x11000180 0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>, + <&infracfg CLK_IFR_I2C0_SEL>, + <&topckgen CLK_TOP_I2C0>, + <&topckgen CLK_TOP_APDMA>; + clock-names = "main-source", + "main-sel", + "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@1100a000 { + compatible = "mediatek,mt8516-i2c", + "mediatek,mt2712-i2c"; + reg = <0 0x1100a000 0 0x90>, + <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>, + <&infracfg CLK_IFR_I2C1_SEL>, + <&topckgen CLK_TOP_I2C1>, + <&topckgen CLK_TOP_APDMA>; + clock-names = "main-source", + "main-sel", + "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@1100b000 { + compatible = "mediatek,mt8516-i2c", + "mediatek,mt2712-i2c"; + reg = <0 0x1100b000 0 0x90>, + <0 0x11000280 0 0x80>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_AHB_INFRA_D2>, + <&infracfg CLK_IFR_I2C2_SEL>, + <&topckgen CLK_TOP_I2C2>, + <&topckgen CLK_TOP_APDMA>; + clock-names = "main-source", + "main-sel", + "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi: spi@1100c000 { + compatible = "mediatek,mt8516-spi", + "mediatek,mt2712-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100c000 0 0x1000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D12>, + <&topckgen CLK_TOP_SPI_SEL>, + <&topckgen CLK_TOP_SPI>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + mmc0: mmc@11120000 { + compatible = "mediatek,mt8516-mmc"; + reg = <0 0x11120000 0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_MSDC0>, + <&topckgen CLK_TOP_AHB_INFRA_SEL>, + <&topckgen CLK_TOP_MSDC0_INFRA>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc1: mmc@11130000 { + compatible = "mediatek,mt8516-mmc"; + reg = <0 0x11130000 0 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_MSDC1>, + <&topckgen CLK_TOP_AHB_INFRA_SEL>, + <&topckgen CLK_TOP_MSDC1_INFRA>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc2: mmc@11170000 { + compatible = "mediatek,mt8516-mmc"; + reg = <0 0x11170000 0 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_MSDC2>, + <&topckgen CLK_TOP_RG_MSDC2>, + <&topckgen CLK_TOP_MSDC2_INFRA>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + rng: rng@1020c000 { + compatible = "mediatek,mt8516-rng", + "mediatek,mt7623-rng"; + reg = <0 0x1020c000 0 0x100>; + clocks = <&topckgen CLK_TOP_TRNG>; + clock-names = "rng"; + }; + + pwm: pwm@11008000 { + compatible = "mediatek,mt8516-pwm"; + reg = <0 0x11008000 0 0x1000>; + #pwm-cells = <2>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_PWM>, + <&topckgen CLK_TOP_PWM_B>, + <&topckgen CLK_TOP_PWM1_FB>, + <&topckgen CLK_TOP_PWM2_FB>, + <&topckgen CLK_TOP_PWM3_FB>, + <&topckgen CLK_TOP_PWM4_FB>, + <&topckgen CLK_TOP_PWM5_FB>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3", + "pwm4", "pwm5"; + }; + + usb0: usb@11100000 { + compatible = "mediatek,mtk-musb"; + reg = <0 0x11100000 0 0x1000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "mc"; + phys = <&usb0_port PHY_TYPE_USB2>; + clocks = <&topckgen CLK_TOP_USB>, + <&topckgen CLK_TOP_USBIF>, + <&topckgen CLK_TOP_USB_1P>; + clock-names = "main","mcu","univpll"; + status = "disabled"; + }; + + usb0_phy: usb@11110000 { + compatible = "mediatek,generic-tphy-v1"; + reg = <0 0x11110000 0 0x800>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb0_port: usb-phy@11110800 { + reg = <0 0x11110800 0 0x100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + }; +}; diff --git a/sys/gnu/dts/arm64/mediatek/pumpkin-common.dtsi b/sys/gnu/dts/arm64/mediatek/pumpkin-common.dtsi new file mode 100644 index 000000000000..a31093d7142b --- /dev/null +++ b/sys/gnu/dts/arm64/mediatek/pumpkin-common.dtsi @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 BayLibre, SAS. + * Author: Fabien Parent <fparent@baylibre.com> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee: optee@4fd00000 { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + volume-up { + gpios = <&pio 42 GPIO_ACTIVE_LOW>; + label = "volume_up"; + linux,code = <115>; + wakeup-source; + debounce-interval = <15>; + }; + + volume-down { + gpios = <&pio 43 GPIO_ACTIVE_LOW>; + label = "volume_down"; + linux,code = <114>; + wakeup-source; + debounce-interval = <15>; + }; + }; +}; + +&i2c0 { + clock-div = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + tca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + rst-gpio = <&pio 65 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&tca6416_pins>; + + gpio-controller; + #gpio-cells = <2>; + + eint20_mux_sel0 { + gpio-hog; + gpios = <0 0>; + input; + line-name = "eint20_mux_sel0"; + }; + + expcon_mux_sel1 { + gpio-hog; + gpios = <1 0>; + input; + line-name = "expcon_mux_sel1"; + }; + + mrg_di_mux_sel2 { + gpio-hog; + gpios = <2 0>; + input; + line-name = "mrg_di_mux_sel2"; + }; + + sd_sdio_mux_sel3 { + gpio-hog; + gpios = <3 0>; + input; + line-name = "sd_sdio_mux_sel3"; + }; + + sd_sdio_mux_ctrl7 { + gpio-hog; + gpios = <7 0>; + output-low; + line-name = "sd_sdio_mux_ctrl7"; + }; + + hw_id0 { + gpio-hog; + gpios = <8 0>; + input; + line-name = "hw_id0"; + }; + + hw_id1 { + gpio-hog; + gpios = <9 0>; + input; + line-name = "hw_id1"; + }; + + hw_id2 { + gpio-hog; + gpios = <10 0>; + input; + line-name = "hw_id2"; + }; + + fg_int_n { + gpio-hog; + gpios = <11 0>; + input; + line-name = "fg_int_n"; + }; + + usba_pwr_en { + gpio-hog; + gpios = <12 0>; + output-high; + line-name = "usba_pwr_en"; + }; + + wifi_3v3_pg { + gpio-hog; + gpios = <13 0>; + input; + line-name = "wifi_3v3_pg"; + }; + + cam_rst { + gpio-hog; + gpios = <14 0>; + output-low; + line-name = "cam_rst"; + }; + + cam_pwdn { + gpio-hog; + gpios = <15 0>; + output-low; + line-name = "cam_pwdn"; + }; + }; +}; + +&i2c2 { + clock-div = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + }; +}; + +&usb0_phy { + status = "okay"; +}; + +&pio { + gpio_keys_default: gpiodefault { + pins_cmd_dat { + pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>, + <MT8516_PIN_43_KPCOL1__FUNC_GPIO43>; + bias-pull-up; + input-enable; + }; + }; + + i2c0_pins_a: i2c0@0 { + pins1 { + pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>, + <MT8516_PIN_59_SCL0__FUNC_SCL0_0>; + bias-disable; + }; + }; + + i2c2_pins_a: i2c2@0 { + pins1 { + pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>, + <MT8516_PIN_61_SCL2__FUNC_SCL2_0>; + bias-disable; + }; + }; + + tca6416_pins: pinmux_tca6416_pins { + gpio_mux_rst_n_pin { + pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>; + output-high; + }; + + gpio_mux_int_n_pin { + pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>; + input-enable; + bias-pull-up; + }; + }; +}; diff --git a/sys/gnu/dts/arm64/nvidia/tegra132.dtsi b/sys/gnu/dts/arm64/nvidia/tegra132.dtsi index 6238e6e274b4..11a1bb428595 100644 --- a/sys/gnu/dts/arm64/nvidia/tegra132.dtsi +++ b/sys/gnu/dts/arm64/nvidia/tegra132.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/tegra124-soctherm.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra132", "nvidia,tegra124"; @@ -577,11 +578,12 @@ clock-names = "rtc"; }; - pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra124-pmc"; reg = <0x0 0x7000e400 0x0 0x400>; clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; }; fuse@7000f800 { diff --git a/sys/gnu/dts/arm64/nvidia/tegra186-p2771-0000.dts b/sys/gnu/dts/arm64/nvidia/tegra186-p2771-0000.dts index f1de4ff6230a..1af7f9ffb7b6 100644 --- a/sys/gnu/dts/arm64/nvidia/tegra186-p2771-0000.dts +++ b/sys/gnu/dts/arm64/nvidia/tegra186-p2771-0000.dts @@ -131,7 +131,7 @@ status = "okay"; lanes { - usb2-0 { + micro_b: usb2-0 { nvidia,function = "xusb"; status = "okay"; }; @@ -174,8 +174,20 @@ usb2-0 { status = "okay"; mode = "otg"; - vbus-supply = <&vdd_usb0>; + + usb-role-switch; + connector { + compatible = "usb-b-connector", + "gpio-usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-gpio = <&gpio + TEGRA186_MAIN_GPIO(X, 7) + GPIO_ACTIVE_LOW>; + id-gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + }; + }; usb2-1 { @@ -201,12 +213,20 @@ phy-names = "usb2-0", "usb2-1", "usb3-0"; }; + usb@3550000 { + status = "okay"; + + phys = <µ_b>; + phy-names = "usb2-0"; + }; + i2c@c250000 { /* carrier board ID EEPROM */ eeprom@57 { compatible = "atmel,24c02"; reg = <0x57>; + vcc-supply = <&vdd_1v8>; address-bits = <8>; page-size = <8>; size = <256>; @@ -258,7 +278,7 @@ status = "okay"; avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>; - vdd-hdmi-dp-pll = <&vdd_1v8_ap>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>; nvidia,dpaux = <&dpaux>; }; diff --git a/sys/gnu/dts/arm64/nvidia/tegra186-p3310.dtsi b/sys/gnu/dts/arm64/nvidia/tegra186-p3310.dtsi index 947744d0f04c..da96de04d003 100644 --- a/sys/gnu/dts/arm64/nvidia/tegra186-p3310.dtsi +++ b/sys/gnu/dts/arm64/nvidia/tegra186-p3310.dtsi @@ -171,6 +171,7 @@ compatible = "atmel,24c02"; reg = <0x50>; + vcc-supply = <&vdd_1v8>; address-bits = <8>; page-size = <8>; size = <256>; diff --git a/sys/gnu/dts/arm64/nvidia/tegra186.dtsi b/sys/gnu/dts/arm64/nvidia/tegra186.dtsi index c905527c26ef..58100fb9cd8b 100644 --- a/sys/gnu/dts/arm64/nvidia/tegra186.dtsi +++ b/sys/gnu/dts/arm64/nvidia/tegra186.dtsi @@ -572,6 +572,25 @@ nvidia,xusb-padctl = <&padctl>; }; + usb@3550000 { + compatible = "nvidia,tegra186-xudc"; + reg = <0x0 0x03550000 0x0 0x8000>, + <0x0 0x03558000 0x0 0x1000>; + reg-names = "base", "fpci"; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_XUSB_CORE_DEV>, + <&bpmp TEGRA186_CLK_XUSB_SS>, + <&bpmp TEGRA186_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA186_CLK_XUSB_FS>; + clock-names = "dev", "ss", "ss_src", "fs_src"; + iommus = <&smmu TEGRA186_SID_XUSB_DEV>; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBB>, + <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>; + power-domain-names = "dev", "ss"; + nvidia,xusb-padctl = <&padctl>; + status = "disabled"; + }; + fuse@3820000 { compatible = "nvidia,tegra186-efuse"; reg = <0x0 0x03820000 0x0 0x10000>; diff --git a/sys/gnu/dts/arm64/nvidia/tegra194-p2888.dtsi b/sys/gnu/dts/arm64/nvidia/tegra194-p2888.dtsi index bdd33ff4e324..623f7d7d216b 100644 --- a/sys/gnu/dts/arm64/nvidia/tegra194-p2888.dtsi +++ b/sys/gnu/dts/arm64/nvidia/tegra194-p2888.dtsi @@ -71,6 +71,29 @@ vmmc-supply = <&vdd_emmc_3v3>; }; + padctl@3520000 { + avdd-usb-supply = <&vdd_usb_3v3>; + vclamp-usb-supply = <&vdd_1v8ao>; + + ports { + usb2-1 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-3 { + vbus-supply = <&vdd_5v_sata>; + }; + + usb3-0 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb3-3 { + vbus-supply = <&vdd_5v0_sys>; + }; + }; + }; + rtc@c2a0000 { status = "okay"; }; @@ -234,7 +257,7 @@ regulator-max-microvolt = <3300000>; }; - ldo5 { + vdd_usb_3v3: ldo5 { regulator-name = "VDD_USB_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -317,5 +340,16 @@ gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>; regulator-boot-on; }; + + vdd_5v_sata: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + + regulator-name = "VDD_5V_SATA"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; }; diff --git a/sys/gnu/dts/arm64/nvidia/tegra194-p2972-0000.dts b/sys/gnu/dts/arm64/nvidia/tegra194-p2972-0000.dts index 985e7d84f161..e15d1eac05f5 100644 --- a/sys/gnu/dts/arm64/nvidia/tegra194-p2972-0000.dts +++ b/sys/gnu/dts/arm64/nvidia/tegra194-p2972-0000.dts @@ -37,6 +37,69 @@ status = "okay"; }; + padctl@3520000 { + status = "okay"; + + pads { + usb2 { + lanes { + usb2-1 { + status = "okay"; + }; + + usb2-3 { + status = "okay"; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + status = "okay"; + }; + + usb3-3 { + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-1 { + mode = "host"; + status = "okay"; + }; + + usb2-3 { + mode = "host"; + status = "okay"; + }; + + usb3-0 { + nvidia,usb2-companion = <1>; + status = "okay"; + }; + + usb3-3 { + nvidia,usb2-companion = <3>; + maximum-speed = "super-speed"; + status = "okay"; + }; + }; + }; + + usb@3610000 { + status = "okay"; + + phys = <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, + <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-3}>; + phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3"; + }; + pwm@c340000 { status = "okay"; }; @@ -136,6 +199,24 @@ "p2u-5", "p2u-6", "p2u-7"; }; + pcie_ep@141a0000 { + status = "disabled"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) + GPIO_ACTIVE_HIGH>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + fan: fan { compatible = "pwm-fan"; pwms = <&pwm4 0 45334>; diff --git a/sys/gnu/dts/arm64/nvidia/tegra194.dtsi b/sys/gnu/dts/arm64/nvidia/tegra194.dtsi index ccac43be12ac..f4ede86e32b4 100644 --- a/sys/gnu/dts/arm64/nvidia/tegra194.dtsi +++ b/sys/gnu/dts/arm64/nvidia/tegra194.dtsi @@ -537,6 +537,145 @@ status = "disabled"; }; + xusb_padctl: padctl@3520000 { + compatible = "nvidia,tegra194-xusb-padctl"; + reg = <0x03520000 0x1000>, + <0x03540000 0x1000>; + reg-names = "padctl", "ao"; + + resets = <&bpmp TEGRA194_RESET_XUSB_PADCTL>; + reset-names = "padctl"; + + status = "disabled"; + + pads { + usb2 { + clocks = <&bpmp TEGRA194_CLK_USB2_TRK>; + clock-names = "trk"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-3 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-1 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-2 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-3 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "disabled"; + }; + + usb2-1 { + status = "disabled"; + }; + + usb2-2 { + status = "disabled"; + }; + + usb2-3 { + status = "disabled"; + }; + + usb3-0 { + status = "disabled"; + }; + + usb3-1 { + status = "disabled"; + }; + + usb3-2 { + status = "disabled"; + }; + + usb3-3 { + status = "disabled"; + }; + }; + }; + + usb@3610000 { + compatible = "nvidia,tegra194-xusb"; + reg = <0x03610000 0x40000>, + <0x03600000 0x10000>; + reg-names = "hcd", "fpci"; + + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>, + <&bpmp TEGRA194_CLK_XUSB_FALCON>, + <&bpmp TEGRA194_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA194_CLK_XUSB_SS>, + <&bpmp TEGRA194_CLK_CLK_M>, + <&bpmp TEGRA194_CLK_XUSB_FS>, + <&bpmp TEGRA194_CLK_UTMIPLL>, + <&bpmp TEGRA194_CLK_CLK_M>, + <&bpmp TEGRA194_CLK_PLLE>; + clock-names = "xusb_host", "xusb_falcon_src", + "xusb_ss", "xusb_ss_src", "xusb_hs_src", + "xusb_fs_src", "pll_u_480m", "clk_m", + "pll_e"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>, + <&bpmp TEGRA194_POWER_DOMAIN_XUSBA>; + power-domain-names = "xusb_host", "xusb_ss"; + + nvidia,xusb-padctl = <&xusb_padctl>; + status = "disabled"; + }; + fuse@3820000 { compatible = "nvidia,tegra194-efuse"; reg = <0x03820000 0x10000>; @@ -1208,7 +1347,7 @@ }; pcie@14100000 { - compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; reg = <0x00 0x14100000 0x0 0x00020000 /* appl registers (128K) */ 0x00 0x30000000 0x0 0x00040000 /* configuration space (256K) */ @@ -1253,7 +1392,7 @@ }; pcie@14120000 { - compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; reg = <0x00 0x14120000 0x0 0x00020000 /* appl registers (128K) */ 0x00 0x32000000 0x0 0x00040000 /* configuration space (256K) */ @@ -1298,7 +1437,7 @@ }; pcie@14140000 { - compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; reg = <0x00 0x14140000 0x0 0x00020000 /* appl registers (128K) */ 0x00 0x34000000 0x0 0x00040000 /* configuration space (256K) */ @@ -1343,7 +1482,7 @@ }; pcie@14160000 { - compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; reg = <0x00 0x14160000 0x0 0x00020000 /* appl registers (128K) */ 0x00 0x36000000 0x0 0x00040000 /* configuration space (256K) */ @@ -1388,7 +1527,7 @@ }; pcie@14180000 { - compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */ @@ -1433,7 +1572,7 @@ }; pcie@141a0000 { - compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ 0x00 0x3a000000 0x0 0x00040000 /* configuration space (256K) */ @@ -1481,6 +1620,105 @@ 0x82000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ }; + pcie_ep@14160000 { + compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; + reg = <0x00 0x14160000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x36040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x36080000 0x0 0x00040000 /* DBI reg space (256K) */ + 0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + status = "disabled"; + + num-lanes = <4>; + num-ib-windows = <2>; + num-ob-windows = <8>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_4>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + nvidia,bpmp = <&bpmp 4>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + }; + + pcie_ep@14180000 { + compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x38040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x38080000 0x0 0x00040000 /* DBI reg space (256K) */ + 0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + status = "disabled"; + + num-lanes = <8>; + num-ib-windows = <2>; + num-ob-windows = <8>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + nvidia,bpmp = <&bpmp 0>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + }; + + pcie_ep@141a0000 { + compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x3a080000 0x0 0x00040000 /* DBI reg space (256K) */ + 0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + status = "disabled"; + + num-lanes = <8>; + num-ib-windows = <2>; + num-ob-windows = <8>; + + pinctrl-names = "default"; + pinctrl-0 = <&clkreq_c5_bi_dir_state>; + + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA194_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + }; + sysram@40000000 { compatible = "nvidia,tegra194-sysram", "mmio-sram"; reg = <0x0 0x40000000 0x0 0x50000>; diff --git a/sys/gnu/dts/arm64/nvidia/tegra210-p2180.dtsi b/sys/gnu/dts/arm64/nvidia/tegra210-p2180.dtsi index cb58f79deb48..f87d2437d11c 100644 --- a/sys/gnu/dts/arm64/nvidia/tegra210-p2180.dtsi +++ b/sys/gnu/dts/arm64/nvidia/tegra210-p2180.dtsi @@ -265,11 +265,14 @@ }; i2c@7000c500 { + status = "okay"; + /* module ID EEPROM */ eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; + vcc-supply = <&vdd_1v8>; address-bits = <8>; page-size = <8>; size = <256>; diff --git a/sys/gnu/dts/arm64/nvidia/tegra210-p2371-2180.dts b/sys/gnu/dts/arm64/nvidia/tegra210-p2371-2180.dts index a3cafe39ba4c..ea0e1efa6973 100644 --- a/sys/gnu/dts/arm64/nvidia/tegra210-p2371-2180.dts +++ b/sys/gnu/dts/arm64/nvidia/tegra210-p2371-2180.dts @@ -56,6 +56,7 @@ backlight: backlight@2c { compatible = "ti,lp8557"; reg = <0x2c>; + power-supply = <&vdd_3v3_sys>; dev-ctrl = /bits/ 8 <0x80>; init-brt = /bits/ 8 <0xff>; @@ -85,6 +86,7 @@ compatible = "atmel,24c02"; reg = <0x57>; + vcc-supply = <&vdd_1v8>; address-bits = <8>; page-size = <8>; size = <256>; diff --git a/sys/gnu/dts/arm64/nvidia/tegra210-p2597.dtsi b/sys/gnu/dts/arm64/nvidia/tegra210-p2597.dtsi index b0095072bc28..313a4c29d37a 100644 --- a/sys/gnu/dts/arm64/nvidia/tegra210-p2597.dtsi +++ b/sys/gnu/dts/arm64/nvidia/tegra210-p2597.dtsi @@ -5,6 +5,10 @@ model = "NVIDIA Tegra210 P2597 I/O board"; compatible = "nvidia,p2597", "nvidia,tegra210"; + aliases { + ethernet = "/usb@70090000/ethernet@1"; + }; + host1x@50000000 { dpaux@54040000 { status = "okay"; @@ -1336,7 +1340,6 @@ <&{/padctl@7009f000/pads/pcie/lanes/pcie-5}>; phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0", "usb3-1"; - dvddio-pex-supply = <&vdd_pex_1v05>; hvddio-pex-supply = <&vdd_1v8>; avdd-usb-supply = <&vdd_3v3_sys>; @@ -1347,6 +1350,13 @@ hvdd-usb-ss-pll-e-supply = <&vdd_1v8>; status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + reg = <1>; + }; }; padctl@7009f000 { @@ -1362,7 +1372,7 @@ status = "okay"; lanes { - usb2-0 { + micro_b: usb2-0 { nvidia,function = "xusb"; status = "okay"; }; @@ -1440,7 +1450,19 @@ ports { usb2-0 { status = "okay"; + vbus-supply = <&vdd_usb_vbus_otg>; mode = "otg"; + + usb-role-switch; + connector { + compatible = "usb-b-connector", + "gpio-usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) + GPIO_ACTIVE_LOW>; + id-gpio = <&pmic 0 0>; + }; }; usb2-1 { @@ -1483,6 +1505,14 @@ vmmc-supply = <&vdd_3v3_sd>; }; + usb@700d0000 { + status = "okay"; + phys = <µ_b>; + phy-names = "usb2-0"; + avddio-usb-supply = <&vdd_3v3_sys>; + hvdd-usb-supply = <&vdd_1v8>; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -1606,6 +1636,17 @@ vin-supply = <&vdd_5v0_sys>; }; + vdd_usb_vbus_otg: regulator@11 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "USB_VBUS_EN0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + vdd_hdmi: regulator@10 { compatible = "regulator-fixed"; reg = <10>; diff --git a/sys/gnu/dts/arm64/nvidia/tegra210-p3450-0000.dts b/sys/gnu/dts/arm64/nvidia/tegra210-p3450-0000.dts index 9101d3a39cd2..21ed1756b889 100644 --- a/sys/gnu/dts/arm64/nvidia/tegra210-p3450-0000.dts +++ b/sys/gnu/dts/arm64/nvidia/tegra210-p3450-0000.dts @@ -114,6 +114,7 @@ compatible = "atmel,24c02"; reg = <0x50>; + vcc-supply = <&vdd_1v8>; address-bits = <8>; page-size = <8>; size = <256>; @@ -124,6 +125,7 @@ compatible = "atmel,24c02"; reg = <0x57>; + vcc-supply = <&vdd_1v8>; address-bits = <8>; page-size = <8>; size = <256>; @@ -443,7 +445,7 @@ status = "okay"; lanes { - usb2-0 { + micro_b: usb2-0 { nvidia,function = "xusb"; status = "okay"; }; @@ -505,7 +507,17 @@ ports { usb2-0 { status = "okay"; - mode = "otg"; + mode = "peripheral"; + + usb-role-switch; + connector { + compatible = "usb-b-connector", + "gpio-usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-gpio = <&gpio TEGRA_GPIO(CC, 4) + GPIO_ACTIVE_LOW>; + }; }; usb2-1 { @@ -536,6 +548,14 @@ vmmc-supply = <&vdd_3v3_sd>; }; + usb@700d0000 { + status = "okay"; + phys = <µ_b>; + phy-names = "usb2-0"; + avddio-usb-supply = <&vdd_3v3_sys>; + hvdd-usb-supply = <&vdd_1v8>; + }; + sdhci@700b0400 { status = "okay"; bus-width = <4>; diff --git a/sys/gnu/dts/arm64/nvidia/tegra210-smaug.dts b/sys/gnu/dts/arm64/nvidia/tegra210-smaug.dts index 72c7a04ac1df..2faab6390552 100644 --- a/sys/gnu/dts/arm64/nvidia/tegra210-smaug.dts +++ b/sys/gnu/dts/arm64/nvidia/tegra210-smaug.dts @@ -1592,7 +1592,7 @@ reg = <0x1a>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>; - clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>; + clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_2>; clock-names = "mclk"; nuvoton,jkdet-enable; diff --git a/sys/gnu/dts/arm64/nvidia/tegra210.dtsi b/sys/gnu/dts/arm64/nvidia/tegra210.dtsi index 48c63256ba7f..64c46ce3849d 100644 --- a/sys/gnu/dts/arm64/nvidia/tegra210.dtsi +++ b/sys/gnu/dts/arm64/nvidia/tegra210.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/reset/tegra210-car.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/tegra124-soctherm.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra210"; @@ -770,16 +771,17 @@ compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc"; reg = <0x0 0x7000e000 0x0 0x100>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&pmc>; + interrupt-parent = <&tegra_pmc>; clocks = <&tegra_car TEGRA210_CLK_RTC>; clock-names = "rtc"; }; - pmc: pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra210-pmc"; reg = <0x0 0x7000e400 0x0 0x400>; clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; #interrupt-cells = <2>; interrupt-controller; @@ -1207,6 +1209,25 @@ status = "disabled"; }; + usb@700d0000 { + compatible = "nvidia,tegra210-xudc"; + reg = <0x0 0x700d0000 0x0 0x8000>, + <0x0 0x700d8000 0x0 0x1000>, + <0x0 0x700d9000 0x0 0x1000>; + reg-names = "base", "fpci", "ipfs"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>, + <&tegra_car TEGRA210_CLK_XUSB_SS>, + <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>; + clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src"; + power-domains = <&pd_xusbdev>, <&pd_xusbss>; + power-domain-names = "dev", "ss"; + nvidia,xusb-padctl = <&padctl>; + status = "disabled"; + }; + mipi: mipi@700e3000 { compatible = "nvidia,tegra210-mipi"; reg = <0x0 0x700e3000 0x0 0x100>; diff --git a/sys/gnu/dts/arm64/qcom/apq8016-sbc.dtsi b/sys/gnu/dts/arm64/qcom/apq8016-sbc.dtsi index 037e26b3f8d5..06aab44d798c 100644 --- a/sys/gnu/dts/arm64/qcom/apq8016-sbc.dtsi +++ b/sys/gnu/dts/arm64/qcom/apq8016-sbc.dtsi @@ -562,7 +562,6 @@ &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l5-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; vdd_l7-supply = <&pm8916_s4>; diff --git a/sys/gnu/dts/arm64/qcom/apq8096-db820c.dtsi b/sys/gnu/dts/arm64/qcom/apq8096-db820c.dtsi index fff6115f2670..c4abbccf2bed 100644 --- a/sys/gnu/dts/arm64/qcom/apq8096-db820c.dtsi +++ b/sys/gnu/dts/arm64/qcom/apq8096-db820c.dtsi @@ -658,8 +658,8 @@ s11 { qcom,saw-leader; regulator-always-on; - regulator-min-microvolt = <1230000>; - regulator-max-microvolt = <1230000>; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; }; }; @@ -908,10 +908,27 @@ status = "okay"; }; +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "DB820c"; - audio-routing = "RX_BIAS", "MCLK"; + audio-routing = "RX_BIAS", "MCLK", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; mm1-dai-link { link-name = "MultiMedia1"; @@ -999,13 +1016,7 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - - vdda-phy-max-microamp = <18380>; - vdda-pll-max-microamp = <9440>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; }; &ufshc { diff --git a/sys/gnu/dts/arm64/qcom/ipq6018-cp01-c1.dts b/sys/gnu/dts/arm64/qcom/ipq6018-cp01-c1.dts new file mode 100644 index 000000000000..b31117a93995 --- /dev/null +++ b/sys/gnu/dts/arm64/qcom/ipq6018-cp01-c1.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ6018 CP01 board device tree source + * + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "ipq6018.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1"; + compatible = "qcom,ipq6018-cp01", "qcom,ipq6018"; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs-append = " swiotlb=1"; + }; +}; + +&blsp1_uart3 { + pinctrl-0 = <&serial_3_pins>; + pinctrl-names = "default"; + status = "ok"; +}; + +&i2c_1 { + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "ok"; +}; + +&spi_0 { + cs-select = <0>; + status = "ok"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "n25q128a11"; + spi-max-frequency = <50000000>; + }; +}; + +&tlmm { + i2c_1_pins: i2c-1-pins { + pins = "gpio42", "gpio43"; + function = "blsp2_i2c"; + drive-strength = <8>; + }; + + spi_0_pins: spi-0-pins { + pins = "gpio38", "gpio39", "gpio40", "gpio41"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-pull-down; + }; +}; diff --git a/sys/gnu/dts/arm64/qcom/ipq6018.dtsi b/sys/gnu/dts/arm64/qcom/ipq6018.dtsi new file mode 100644 index 000000000000..1aa8d8579463 --- /dev/null +++ b/sys/gnu/dts/arm64/qcom/ipq6018.dtsi @@ -0,0 +1,443 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ6018 SoC device tree source + * + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-ipq6018.h> +#include <dt-bindings/reset/qcom,gcc-ipq6018.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&intc>; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + xo: xo { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x1>; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x2>; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x3>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <0x2>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm"; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x80>; + #hwlock-cells = <1>; + }; + + pmuv8: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz: tz@48500000 { + reg = <0x0 0x48500000 0x0 0x00200000>; + no-map; + }; + + smem_region: memory@4aa00000 { + reg = <0x0 0x4aa00000 0x0 0x00100000>; + no-map; + }; + + q6_region: memory@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x02800000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_region>; + hwlocks = <&tcsr_mutex 0>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + dma-ranges; + compatible = "simple-bus"; + + prng: qrng@e1000 { + compatible = "qcom,prng-ee"; + reg = <0xe3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + cryptobam: dma@704000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,controlled-remotely = <1>; + qcom,config-pipe-trust-reg = <0>; + }; + + crypto: crypto@73a000 { + compatible = "qcom,crypto-v5.1"; + reg = <0x0073a000 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq6018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 80>; + interrupt-controller; + #interrupt-cells = <2>; + + serial_3_pins: serial3-pinmux { + pins = "gpio44", "gpio45"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + }; + + gcc: gcc@1800000 { + compatible = "qcom,gcc-ipq6018"; + reg = <0x01800000 0x80000>; + clocks = <&xo>, <&sleep_clk>; + clock-names = "xo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + tcsr_mutex_regs: syscon@1905000 { + compatible = "syscon"; + reg = <0x01905000 0x8000>; + }; + + tcsr_q6: syscon@1945000 { + compatible = "syscon"; + reg = <0x01945000 0xe000>; + }; + + blsp_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x2b000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart3: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + spi_0: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi_1: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c_0: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + dmas = <&blsp_dma 15>, <&blsp_dma 14>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c_1: i2c@78b7000 { /* BLSP1 QUP2 */ + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + dmas = <&blsp_dma 17>, <&blsp_dma 16>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <0x3>; + reg = <0x0b000000 0x1000>, /*GICD*/ + <0x0b002000 0x1000>, /*GICC*/ + <0x0b001000 0x1000>, /*GICH*/ + <0x0b004000 0x1000>; /*GICV*/ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + watchdog@b017000 { + compatible = "qcom,kpss-wdt"; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + reg = <0x0b017000 0x40>; + clocks = <&sleep_clk>; + timeout-sec = <10>; + }; + + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq8074-apcs-apps-global"; + reg = <0x0b111000 0xc>; + + #mbox-cells = <1>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + timer@b120000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + clock-frequency = <19200000>; + + frame@b120000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b128000 0x1000>; + status = "disabled"; + }; + }; + + q6v5_wcss: remoteproc@cd00000 { + compatible = "qcom,ipq8074-wcss-pil"; + reg = <0x0cd00000 0x4040>, + <0x004ab000 0x20>; + reg-names = "qdsp6", + "rmb"; + interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 0 0>, + <&wcss_smp2p_in 1 0>, + <&wcss_smp2p_in 2 0>, + <&wcss_smp2p_in 3 0>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + resets = <&gcc GCC_WCSSAON_RESET>, + <&gcc GCC_WCSS_BCR>, + <&gcc GCC_WCSS_Q6_BCR>; + + reset-names = "wcss_aon_reset", + "wcss_reset", + "wcss_q6_reset"; + + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "prng"; + + qcom,halt-regs = <&tcsr_q6 0xa000 0xd000 0x0>; + + qcom,smem-states = <&wcss_smp2p_out 0>, + <&wcss_smp2p_out 1>; + qcom,smem-state-names = "shutdown", + "stop"; + + memory-region = <&q6_region>; + + glink-edge { + interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 8>; + + qrtr_requests { + qcom,glink-channels = "IPCRTR"; + }; + }; + }; + + }; + + wcss: wcss-smp2p { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 322 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 9>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + wcss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wcss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/sys/gnu/dts/arm64/qcom/ipq8074.dtsi b/sys/gnu/dts/arm64/qcom/ipq8074.dtsi index 67ee5f560104..2b31823d3ccd 100644 --- a/sys/gnu/dts/arm64/qcom/ipq8074.dtsi +++ b/sys/gnu/dts/arm64/qcom/ipq8074.dtsi @@ -21,6 +21,7 @@ reg = <0x1000000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&tlmm 0 0 70>; #gpio-cells = <0x2>; interrupt-controller; #interrupt-cells = <0x2>; diff --git a/sys/gnu/dts/arm64/qcom/msm8916-samsung-a2015-common.dtsi b/sys/gnu/dts/arm64/qcom/msm8916-samsung-a2015-common.dtsi index bd1eb3eeca53..43c5e0f882f1 100644 --- a/sys/gnu/dts/arm64/qcom/msm8916-samsung-a2015-common.dtsi +++ b/sys/gnu/dts/arm64/qcom/msm8916-samsung-a2015-common.dtsi @@ -15,6 +15,14 @@ stdout-path = "serial0"; }; + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + soc { sdhci@7824000 { status = "okay"; diff --git a/sys/gnu/dts/arm64/qcom/msm8916.dtsi b/sys/gnu/dts/arm64/qcom/msm8916.dtsi index 9f31064f2374..a88a15f2352b 100644 --- a/sys/gnu/dts/arm64/qcom/msm8916.dtsi +++ b/sys/gnu/dts/arm64/qcom/msm8916.dtsi @@ -423,6 +423,7 @@ reg = <0x1000000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&msmgpio 0 0 122>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -860,7 +861,7 @@ }; tsens: thermal-sensor@4a9000 { - compatible = "qcom,msm8916-tsens"; + compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; reg = <0x4a9000 0x1000>, /* TM */ <0x4a8000 0x1000>; /* SROT */ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; @@ -1129,6 +1130,20 @@ qcom,remote-pid = <1>; label = "hexagon"; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,smd-channels = "fastrpcsmd-apps-dsp"; + label = "adsp"; + + #address-cells = <1>; + #size-cells = <0>; + + cb@1{ + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + }; + }; }; }; @@ -1415,6 +1430,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; + arm,coresight-loses-context-with-cpu; cpu = <&CPU0>; @@ -1433,6 +1449,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; + arm,coresight-loses-context-with-cpu; cpu = <&CPU1>; @@ -1451,6 +1468,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; + arm,coresight-loses-context-with-cpu; cpu = <&CPU2>; @@ -1469,6 +1487,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; + arm,coresight-loses-context-with-cpu; cpu = <&CPU3>; diff --git a/sys/gnu/dts/arm64/qcom/msm8992.dtsi b/sys/gnu/dts/arm64/qcom/msm8992.dtsi index 8be60c08a9ab..2021795c99ad 100644 --- a/sys/gnu/dts/arm64/qcom/msm8992.dtsi +++ b/sys/gnu/dts/arm64/qcom/msm8992.dtsi @@ -171,6 +171,7 @@ reg = <0xfd510000 0x4000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&msmgpio 0 0 146>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/sys/gnu/dts/arm64/qcom/msm8994.dtsi b/sys/gnu/dts/arm64/qcom/msm8994.dtsi index 3932757f78b7..b1c2d7d6a0f2 100644 --- a/sys/gnu/dts/arm64/qcom/msm8994.dtsi +++ b/sys/gnu/dts/arm64/qcom/msm8994.dtsi @@ -133,6 +133,7 @@ reg = <0xfd510000 0x4000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&msmgpio 0 0 146>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/sys/gnu/dts/arm64/qcom/msm8996.dtsi b/sys/gnu/dts/arm64/qcom/msm8996.dtsi index 7ae082ea14ea..98634d5c4440 100644 --- a/sys/gnu/dts/arm64/qcom/msm8996.dtsi +++ b/sys/gnu/dts/arm64/qcom/msm8996.dtsi @@ -443,10 +443,13 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x00300000 0x90000>; + + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>; + clock-names = "cxo2"; }; tsens0: thermal-sensor@4a9000 { - compatible = "qcom,msm8996-tsens"; + compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; reg = <0x004a9000 0x1000>, /* TM */ <0x004a8000 0x1000>; /* SROT */ #qcom,sensors = <13>; @@ -457,7 +460,7 @@ }; tsens1: thermal-sensor@4ad000 { - compatible = "qcom,msm8996-tsens"; + compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; reg = <0x004ad000 0x1000>, /* TM */ <0x004ac000 0x1000>; /* SROT */ #qcom,sensors = <8>; @@ -695,6 +698,7 @@ reg = <0x01010000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; + gpio-ranges = <&msmgpio 0 0 150>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -882,7 +886,7 @@ reg = <0x00624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufsphy>; + phys = <&ufsphy_lane>; phy-names = "ufsphy"; power-domains = <&gcc UFS_GDSC>; @@ -934,16 +938,25 @@ }; ufsphy: phy@627000 { - compatible = "qcom,msm8996-ufs-phy-qmp-14nm"; - reg = <0x00627000 0xda8>; - reg-names = "phy_mem"; - #phy-cells = <0>; + compatible = "qcom,msm8996-qmp-ufs-phy"; + reg = <0x00627000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_UFS_CLKREF_CLK>; + clock-names = "ref"; - clock-names = "ref_clk_src", "ref_clk"; - clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, - <&gcc GCC_UFS_CLKREF_CLK>; resets = <&ufshc 0>; + reset-names = "ufsphy"; status = "disabled"; + + ufsphy_lane: lanes@627400 { + reg = <0x627400 0x12c>, + <0x627600 0x200>, + <0x627c00 0x1b4>; + #phy-cells = <0>; + }; }; camss: camss@a00000 { @@ -2053,6 +2066,8 @@ reg = <APR_SVC_ASM>; q6asmdai: dais { compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; #sound-dai-cells = <1>; iommus = <&lpass_q6_smmu 1>; }; diff --git a/sys/gnu/dts/arm64/qcom/msm8998-mtp.dtsi b/sys/gnu/dts/arm64/qcom/msm8998-mtp.dtsi index 0e0b9bc12945..8a14b2bf7bca 100644 --- a/sys/gnu/dts/arm64/qcom/msm8998-mtp.dtsi +++ b/sys/gnu/dts/arm64/qcom/msm8998-mtp.dtsi @@ -95,11 +95,15 @@ }; &funnel4 { - status = "okay"; + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; }; &funnel5 { - status = "okay"; + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; }; &pm8005_lsid1 { diff --git a/sys/gnu/dts/arm64/qcom/msm8998.dtsi b/sys/gnu/dts/arm64/qcom/msm8998.dtsi index 91f7f2d07597..c07fee6fd7eb 100644 --- a/sys/gnu/dts/arm64/qcom/msm8998.dtsi +++ b/sys/gnu/dts/arm64/qcom/msm8998.dtsi @@ -130,7 +130,7 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "arm,armv8"; + compatible = "qcom,kryo280"; reg = <0x0 0x0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; @@ -149,7 +149,7 @@ CPU1: cpu@1 { device_type = "cpu"; - compatible = "arm,armv8"; + compatible = "qcom,kryo280"; reg = <0x0 0x1>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; @@ -164,7 +164,7 @@ CPU2: cpu@2 { device_type = "cpu"; - compatible = "arm,armv8"; + compatible = "qcom,kryo280"; reg = <0x0 0x2>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; @@ -179,7 +179,7 @@ CPU3: cpu@3 { device_type = "cpu"; - compatible = "arm,armv8"; + compatible = "qcom,kryo280"; reg = <0x0 0x3>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; @@ -194,7 +194,7 @@ CPU4: cpu@100 { device_type = "cpu"; - compatible = "arm,armv8"; + compatible = "qcom,kryo280"; reg = <0x0 0x100>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; @@ -213,7 +213,7 @@ CPU5: cpu@101 { device_type = "cpu"; - compatible = "arm,armv8"; + compatible = "qcom,kryo280"; reg = <0x0 0x101>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; @@ -228,7 +228,7 @@ CPU6: cpu@102 { device_type = "cpu"; - compatible = "arm,armv8"; + compatible = "qcom,kryo280"; reg = <0x0 0x102>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; @@ -243,7 +243,7 @@ CPU7: cpu@103 { device_type = "cpu"; - compatible = "arm,armv8"; + compatible = "qcom,kryo280"; reg = <0x0 0x103>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; diff --git a/sys/gnu/dts/arm64/qcom/pm6150.dtsi b/sys/gnu/dts/arm64/qcom/pm6150.dtsi index 23534639f455..57af0b4a384d 100644 --- a/sys/gnu/dts/arm64/qcom/pm6150.dtsi +++ b/sys/gnu/dts/arm64/qcom/pm6150.dtsi @@ -20,7 +20,7 @@ mode-bootloader = <0x2>; mode-recovery = <0x1>; - pwrkey { + pm6150_pwrkey: pwrkey { compatible = "qcom,pm8941-pwrkey"; interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; diff --git a/sys/gnu/dts/arm64/qcom/pm8998.dtsi b/sys/gnu/dts/arm64/qcom/pm8998.dtsi index dc2ce23cde05..67283d60e2ac 100644 --- a/sys/gnu/dts/arm64/qcom/pm8998.dtsi +++ b/sys/gnu/dts/arm64/qcom/pm8998.dtsi @@ -45,7 +45,7 @@ mode-bootloader = <0x2>; mode-recovery = <0x1>; - pwrkey { + pm8998_pwrkey: pwrkey { compatible = "qcom,pm8941-pwrkey"; interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; diff --git a/sys/gnu/dts/arm64/qcom/qcs404-evb.dtsi b/sys/gnu/dts/arm64/qcom/qcs404-evb.dtsi index 522d3ef72df5..afe69e8f3114 100644 --- a/sys/gnu/dts/arm64/qcom/qcs404-evb.dtsi +++ b/sys/gnu/dts/arm64/qcom/qcs404-evb.dtsi @@ -200,6 +200,7 @@ &sdcc1 { status = "ok"; + supports-cqe; mmc-ddr-1_8v; mmc-hs400-1_8v; bus-width = <8>; diff --git a/sys/gnu/dts/arm64/qcom/qcs404.dtsi b/sys/gnu/dts/arm64/qcom/qcs404.dtsi index 4ee1e3d5f123..f149a538c1cc 100644 --- a/sys/gnu/dts/arm64/qcom/qcs404.dtsi +++ b/sys/gnu/dts/arm64/qcom/qcs404.dtsi @@ -685,9 +685,9 @@ }; sdcc1: sdcc@7804000 { - compatible = "qcom,sdhci-msm-v5"; + compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"; reg = <0x07804000 0x1000>, <0x7805000 0x1000>; - reg-names = "hc_mem", "cmdq_mem"; + reg-names = "hc", "cqhci"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; diff --git a/sys/gnu/dts/arm64/qcom/sc7180-idp.dts b/sys/gnu/dts/arm64/qcom/sc7180-idp.dts index 388f50ad4fde..043c9b9b5024 100644 --- a/sys/gnu/dts/arm64/qcom/sc7180-idp.dts +++ b/sys/gnu/dts/arm64/qcom/sc7180-idp.dts @@ -7,6 +7,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sc7180.dtsi" #include "pm6150.dtsi" @@ -17,6 +18,7 @@ compatible = "qcom,sc7180-idp", "qcom,sc7180"; aliases { + bluetooth0 = &bluetooth; hsuart0 = &uart3; serial0 = &uart8; }; @@ -101,9 +103,9 @@ }; vreg_l12a_1p8: ldo12 { - regulator-min-microvolt = <1696000>; - regulator-max-microvolt = <1952000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13a_1p8: ldo13 { @@ -143,9 +145,9 @@ }; vreg_l19a_2p9: ldo19 { - regulator-min-microvolt = <2696000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; @@ -189,9 +191,9 @@ }; vreg_l6c_2p9: ldo6 { - regulator-min-microvolt = <2696000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_3p0: ldo7 { @@ -207,9 +209,9 @@ }; vreg_l9c_2p9: ldo9 { - regulator-min-microvolt = <2952000>; - regulator-max-microvolt = <3304000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_3p3: ldo10 { @@ -254,8 +256,40 @@ status = "okay"; }; +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + vmmc-supply = <&vreg_l19a_2p9>; + vqmmc-supply = <&vreg_l12a_1p8>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default","sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + + cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; +}; + &uart3 { status = "okay"; + + bluetooth: wcn3990-bt { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&vreg_l10a_1p8>; + vddxo-supply = <&vreg_l1c_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l10c_3p3>; + max-speed = <3200000>; + clocks = <&rpmhcc RPMH_RF_CLK2>; + }; }; &uart8 { @@ -287,6 +321,12 @@ vdda-pll-supply = <&vreg_l4a_0p8>; }; +&venus { + video-firmware { + iommus = <&apps_smmu 0x0c42 0x0>; + }; +}; + /* PINCTRL - additions to nodes defined in sc7180.dtsi */ &qspi_clk { diff --git a/sys/gnu/dts/arm64/qcom/sc7180.dtsi b/sys/gnu/dts/arm64/qcom/sc7180.dtsi index 8011c5fe2a31..998f101ad623 100644 --- a/sys/gnu/dts/arm64/qcom/sc7180.dtsi +++ b/sys/gnu/dts/arm64/qcom/sc7180.dtsi @@ -5,8 +5,11 @@ * Copyright (c) 2019, The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,dispcc-sc7180.h> #include <dt-bindings/clock/qcom,gcc-sc7180.h> +#include <dt-bindings/clock/qcom,gpucc-sc7180.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,videocc-sc7180.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> #include <dt-bindings/power/qcom-aoss-qmp.h> @@ -75,6 +78,11 @@ reg = <0x0 0x80900000 0x0 0x200000>; no-map; }; + + venus_mem: memory@8f600000 { + reg = <0 0x8f600000 0 0x500000>; + no-map; + }; }; cpus { @@ -86,6 +94,8 @@ compatible = "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; next-level-cache = <&L2_0>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -103,6 +113,8 @@ compatible = "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; next-level-cache = <&L2_100>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -117,6 +129,8 @@ compatible = "arm,armv8"; reg = <0x0 0x200>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; next-level-cache = <&L2_200>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -131,6 +145,8 @@ compatible = "arm,armv8"; reg = <0x0 0x300>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; next-level-cache = <&L2_300>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -145,6 +161,8 @@ compatible = "arm,armv8"; reg = <0x0 0x400>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; next-level-cache = <&L2_400>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -159,6 +177,8 @@ compatible = "arm,armv8"; reg = <0x0 0x500>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; next-level-cache = <&L2_500>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -173,6 +193,8 @@ compatible = "arm,armv8"; reg = <0x0 0x600>; enable-method = "psci"; + capacity-dmips-mhz = <1740>; + dynamic-power-coefficient = <405>; next-level-cache = <&L2_600>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -187,6 +209,8 @@ compatible = "arm,armv8"; reg = <0x0 0x700>; enable-method = "psci"; + capacity-dmips-mhz = <1740>; + dynamic-power-coefficient = <405>; next-level-cache = <&L2_700>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -195,6 +219,42 @@ next-level-cache = <&L3_0>; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; }; memory@80000000 { @@ -299,7 +359,7 @@ method = "smc"; }; - soc: soc { + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; ranges = <0 0 0 0 0x10 0>; @@ -310,8 +370,9 @@ compatible = "qcom,gcc-sc7180"; reg = <0 0x00100000 0 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&rpmhcc RPMH_CXO_CLK_A>; - clock-names = "bi_tcxo", "bi_tcxo_ao"; + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -329,6 +390,33 @@ }; }; + sdhc_1: sdhci@7c4000 { + compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x7c4000 0 0x1000>, + <0 0x07c5000 0 0x1000>; + reg-names = "hc", "cqhci"; + + iommus = <&apps_smmu 0x60 0x0>; + interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + + bus-width = <8>; + non-removable; + supports-cqe; + + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + status = "disabled"; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x008c0000 0 0x6000>; @@ -338,6 +426,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + iommus = <&apps_smmu 0x43 0x0>; status = "disabled"; i2c0: i2c@880000 { @@ -546,6 +635,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + iommus = <&apps_smmu 0x4c3 0x0>; status = "disabled"; i2c6: i2c@a80000 { @@ -745,6 +835,69 @@ }; }; + config_noc: interconnect@1500000 { + compatible = "qcom,sc7180-config-noc"; + reg = <0 0x01500000 0 0x28000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sc7180-system-noc"; + reg = <0 0x01620000 0 0x17080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@1638000 { + compatible = "qcom,sc7180-mc-virt"; + reg = <0 0x01638000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + qup_virt: interconnect@1650000 { + compatible = "qcom,sc7180-qup-virt"; + reg = <0 0x01650000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sc7180-aggre1-noc"; + reg = <0 0x016e0000 0 0x15080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1705000 { + compatible = "qcom,sc7180-aggre2-noc"; + reg = <0 0x01705000 0 0x9000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + compute_noc: interconnect@170e000 { + compatible = "qcom,sc7180-compute-noc"; + reg = <0 0x0170e000 0 0x6000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sc7180-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + ipa_virt: interconnect@1e00000 { + compatible = "qcom,sc7180-ipa-virt"; + reg = <0 0x01e00000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; reg = <0 0x01f40000 0 0x40000>; @@ -1037,6 +1190,140 @@ function = "qup15"; }; }; + + sdc1_on: sdc1-on { + pinconf-clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + pinconf-cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_off: sdc1-off { + pinconf-clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + pinconf-cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-rclk { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_on: sdc2-on { + pinconf-clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + pinconf-cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + pinconf-sd-cd { + pins = "gpio69"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off { + pinconf-clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + pinconf-cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf-sd-cd { + pins = "gpio69"; + bias-disable; + drive-strength = <2>; + }; + }; + }; + + sdhc_2: sdhci@8804000 { + compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + iommus = <&apps_smmu 0x80 0>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + + bus-width = <4>; + + status = "disabled"; + }; + + gpucc: clock-controller@5090000 { + compatible = "qcom,sc7180-gpucc"; + reg = <0 0x05090000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; }; qspi: spi@88dc000 { @@ -1081,8 +1368,8 @@ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, - <&gcc GCC_USB3_PHY_PRIM_BCR>; + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; usb_1_ssphy: phy@88e9200 { @@ -1100,6 +1387,13 @@ }; }; + dc_noc: interconnect@9160000 { + compatible = "qcom,sc7180-dc-noc"; + reg = <0 0x09160000 0 0x03200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + system-cache-controller@9200000 { compatible = "qcom,sc7180-llcc"; reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>; @@ -1107,6 +1401,20 @@ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + gem_noc: interconnect@9680000 { + compatible = "qcom,sc7180-gem-noc"; + reg = <0 0x09680000 0 0x3e200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + npu_noc: interconnect@9990000 { + compatible = "qcom,sc7180-npu-noc"; + reg = <0 0x09990000 0 0x1600>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sc7180-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -1151,6 +1459,201 @@ }; }; + venus: video-codec@aa00000 { + compatible = "qcom,sc7180-venus"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>; + power-domain-names = "venus", "vcodec0"; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus"; + iommus = <&apps_smmu 0x0c00 0x60>; + memory-region = <&venus_mem>; + + video-decoder { + compatible = "venus-decoder"; + }; + + video-encoder { + compatible = "venus-encoder"; + }; + }; + + videocc: clock-controller@ab00000 { + compatible = "qcom,sc7180-videocc"; + reg = <0 0x0ab00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + camnoc_virt: interconnect@ac00000 { + compatible = "qcom,sc7180-camnoc-virt"; + reg = <0 0x0ac00000 0 0x1000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mdss: mdss@ae00000 { + compatible = "qcom,sc7180-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "ahb", "core"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; + assigned-clock-rates = <300000000>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x2>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdp: mdp@ae01000 { + compatible = "qcom,sc7180-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "rot", "lut", "core", + "vsync"; + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <300000000>, + <19200000>; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + phys = <&dsi_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi_phy: dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94a00 0 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sc7180-dispcc"; + reg = <0 0x0af00000 0 0x200000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&dsi_phy 0>, + <&dsi_phy 1>, + <0>, + <0>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sc7180-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>; @@ -1478,6 +1981,20 @@ }; }; }; + + apps_bcm_voter: bcm_voter { + compatible = "qcom,bcm-voter"; + }; + }; + + osm_l3: interconnect@18321000 { + compatible = "qcom,sc7180-osm-l3"; + reg = <0 0x18321000 0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; }; cpufreq_hw: cpufreq@18323000 { @@ -1953,6 +2470,12 @@ hysteresis = <2000>; type = "hot"; }; + + aoss0_crit: aoss0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; @@ -2008,6 +2531,12 @@ hysteresis = <2000>; type = "hot"; }; + + gpuss0_crit: gpuss0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; @@ -2023,6 +2552,12 @@ hysteresis = <2000>; type = "hot"; }; + + gpuss1_crit: gpuss1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; @@ -2038,6 +2573,12 @@ hysteresis = <2000>; type = "hot"; }; + + aoss1_crit: aoss1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; @@ -2053,6 +2594,12 @@ hysteresis = <2000>; type = "hot"; }; + + cwlan_crit: cwlan_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; @@ -2068,6 +2615,12 @@ hysteresis = <2000>; type = "hot"; }; + + audio_crit: audio_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; @@ -2083,6 +2636,12 @@ hysteresis = <2000>; type = "hot"; }; + + ddr_crit: ddr_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; @@ -2098,6 +2657,12 @@ hysteresis = <2000>; type = "hot"; }; + + q6_hvx_crit: q6_hvx_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; @@ -2113,6 +2678,12 @@ hysteresis = <2000>; type = "hot"; }; + + camera_crit: camera_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; @@ -2128,6 +2699,12 @@ hysteresis = <2000>; type = "hot"; }; + + mdm_crit: mdm_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; @@ -2143,6 +2720,12 @@ hysteresis = <2000>; type = "hot"; }; + + mdm_dsp_crit: mdm_dsp_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; @@ -2158,6 +2741,12 @@ hysteresis = <2000>; type = "hot"; }; + + npu_crit: npu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; @@ -2173,6 +2762,12 @@ hysteresis = <2000>; type = "hot"; }; + + video_crit: video_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; }; diff --git a/sys/gnu/dts/arm64/qcom/sdm845-cheza.dtsi b/sys/gnu/dts/arm64/qcom/sdm845-cheza.dtsi index 7b53b3c7ffe6..9070be43a309 100644 --- a/sys/gnu/dts/arm64/qcom/sdm845-cheza.dtsi +++ b/sys/gnu/dts/arm64/qcom/sdm845-cheza.dtsi @@ -614,6 +614,11 @@ ap_ts_i2c: &i2c14 { }; }; +&ipa { + status = "okay"; + modem-init; +}; + &lpasscc { status = "okay"; }; @@ -626,6 +631,10 @@ ap_ts_i2c: &i2c14 { status = "okay"; }; +&pm8998_pwrkey { + status = "disabled"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -1292,3 +1301,9 @@ ap_ts_i2c: &i2c14 { }; }; }; + +&venus { + video-firmware { + iommus = <&apps_smmu 0x10b2 0x0>; + }; +}; diff --git a/sys/gnu/dts/arm64/qcom/sdm845-db845c.dts b/sys/gnu/dts/arm64/qcom/sdm845-db845c.dts index eb77aaa6a819..21fd6f8d5799 100644 --- a/sys/gnu/dts/arm64/qcom/sdm845-db845c.dts +++ b/sys/gnu/dts/arm64/qcom/sdm845-db845c.dts @@ -8,6 +8,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include "sdm845.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" @@ -359,11 +361,56 @@ }; }; +&i2c11 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&i2c14 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; }; +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; + + vddpe-3v3-supply = <&pcie0_3p3v_dual>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; +}; + +&pcie0_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&pcie1 { + status = "okay"; + perst-gpio = <&tlmm 102 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; +}; + +&pcie1_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + &pm8998_gpio { vol_up_pin_a: vol-up-active { pins = "gpio6"; @@ -384,6 +431,34 @@ }; }; +/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ +&q6afedai { + qi2s@22 { + reg = <22>; + qcom,sd-lines = <0 1 2 3>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; + + dai@3 { + reg = <3>; + direction = <2>; + is-compress-dai; + }; +}; + &qupv3_id_0 { status = "okay"; }; @@ -405,7 +480,121 @@ cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; }; +&sound { + compatible = "qcom,db845c-sndcard"; + pinctrl-0 = <&quat_mi2s_active + &quat_mi2s_sd0_active + &quat_mi2s_sd1_active + &quat_mi2s_sd2_active + &quat_mi2s_sd3_active>; + pinctrl-names = "default"; + model = "DB845c"; + audio-routing = + "RX_BIAS", "MCLK", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "DMIC0", "MIC BIAS1", + "DMIC1", "MIC BIAS1", + "DMIC2", "MIC BIAS3", + "DMIC3", "MIC BIAS3", + "SpkrLeft IN", "SPK1 OUT", + "SpkrRight IN", "SPK2 OUT", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MM_DL4", "MultiMedia4 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + mm4-dai-link { + link-name = "MultiMedia4"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; + }; + }; +}; + +&spi2 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + &tlmm { + pcie0_default_state: pcie0-default { + clkreq { + pins = "gpio36"; + function = "pci_e0"; + bias-pull-up; + }; + + reset-n { + pins = "gpio35"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n { + pins = "gpio37"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + pcie0_pwren_state: pcie0-pwren { pins = "gpio90"; function = "gpio"; @@ -414,6 +603,39 @@ bias-disable; }; + pcie1_default_state: pcie1-default { + perst-n { + pins = "gpio102"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + clkreq { + pins = "gpio103"; + function = "pci_e1"; + bias-pull-up; + }; + + wake-n { + pins = "gpio11"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + reset-n { + pins = "gpio75"; + function = "gpio"; + + drive-strength = <16>; + bias-pull-up; + output-high; + }; + }; + sdc2_default_state: sdc2-default { clk { pins = "sdc2_clk"; @@ -444,6 +666,20 @@ function = "gpio"; bias-pull-up; }; + + wcd_intr_default: wcd_intr_default { + pins = <54>; + function = "gpio"; + + input-enable; + bias-pull-down; + drive-strength = <2>; + }; +}; + +&uart3 { + label = "LS-UART0"; + status = "disabled"; }; &uart6 { @@ -461,6 +697,7 @@ }; &uart9 { + label = "LS-UART1"; status = "okay"; }; @@ -534,6 +771,39 @@ vdda-pll-supply = <&vreg_l26a_1p2>; }; +&wcd9340{ + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + reset-gpios = <&tlmm 64 0>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + + swm: swm@c85 { + left_spkr: wsa8810-left{ + compatible = "sdw10217201000"; + reg = <0 1>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: wsa8810-right{ + compatible = "sdw10217201000"; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + reg = <0 2>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; + }; +}; + &wifi { status = "okay"; @@ -546,6 +816,16 @@ }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ +&qup_spi2_default { + drive-strength = <16>; +}; + +&qup_uart3_default{ + pinmux { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "qup3"; + }; +}; &qup_uart6_default { pinmux { diff --git a/sys/gnu/dts/arm64/qcom/sdm845-mtp.dts b/sys/gnu/dts/arm64/qcom/sdm845-mtp.dts index 09ad37b0dd71..023e8b04c7f6 100644 --- a/sys/gnu/dts/arm64/qcom/sdm845-mtp.dts +++ b/sys/gnu/dts/arm64/qcom/sdm845-mtp.dts @@ -50,6 +50,7 @@ &adsp_pas { status = "okay"; + firmware-name = "qcom/sdm845/adsp.mdt"; }; &apps_rsc { @@ -350,6 +351,81 @@ &cdsp_pas { status = "okay"; + firmware-name = "qcom/sdm845/cdsp.mdt"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + qcom,dual-dsi-mode; + qcom,master-dsi; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&truly_in_0>; + data-lanes = <0 1 2 3>; + }; + }; + }; + + panel@0 { + compatible = "truly,nt35597-2K-display"; + reg = <0>; + vdda-supply = <&vreg_l14a_1p88>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + truly_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + truly_in_1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +&dsi1 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi1_1p2>; + + qcom,dual-dsi-mode; + + ports { + port@1 { + endpoint { + remote-endpoint = <&truly_in_1>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi1_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi1_pll>; }; &gcc { @@ -372,6 +448,19 @@ clock-frequency = <400000>; }; +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; +}; + &qupv3_id_1 { status = "okay"; }; diff --git a/sys/gnu/dts/arm64/qcom/sdm845.dtsi b/sys/gnu/dts/arm64/qcom/sdm845.dtsi index d42302b8889b..8f926b5234d4 100644 --- a/sys/gnu/dts/arm64/qcom/sdm845.dtsi +++ b/sys/gnu/dts/arm64/qcom/sdm845.dtsi @@ -17,6 +17,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/reset/qcom,sdm845-pdc.h> +#include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/thermal/thermal.h> @@ -491,6 +492,57 @@ label = "lpass"; qcom,remote-pid = <2>; mboxes = <&apss_shared 8>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + qcom,intents = <512 20>; + + apr-service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: apr-service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6asm: apr-service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1821 0x0>; + }; + }; + + q6adm: apr-service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; @@ -675,6 +727,17 @@ interrupt-controller; #interrupt-cells = <2>; }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; }; smp2p-slpi { @@ -1364,6 +1427,267 @@ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sdm845", "snps,dw-pcie"; + reg = <0 0x01c00000 0 0x2000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0xd00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + iommus = <&apps_smmu 0x1c10 0xf>; + iommu-map = <0x0 &apps_smmu 0x1c10 0x1>, + <0x100 &apps_smmu 0x1c11 0x1>, + <0x200 &apps_smmu 0x1c12 0x1>, + <0x300 &apps_smmu 0x1c13 0x1>, + <0x400 &apps_smmu 0x1c14 0x1>, + <0x500 &apps_smmu 0x1c15 0x1>, + <0x600 &apps_smmu 0x1c16 0x1>, + <0x700 &apps_smmu 0x1c17 0x1>, + <0x800 &apps_smmu 0x1c18 0x1>, + <0x900 &apps_smmu 0x1c19 0x1>, + <0xa00 &apps_smmu 0x1c1a 0x1>, + <0xb00 &apps_smmu 0x1c1b 0x1>, + <0xc00 &apps_smmu 0x1c1c 0x1>, + <0xd00 &apps_smmu 0x1c1d 0x1>, + <0xe00 &apps_smmu 0x1c1e 0x1>, + <0xf00 &apps_smmu 0x1c1f 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sdm845-qmp-pcie-phy"; + reg = <0 0x01c06000 0 0x18c>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: lanes@1c06200 { + reg = <0 0x01c06200 0 0x128>, + <0 0x01c06400 0 0x1fc>, + <0 0x01c06800 0 0x218>, + <0 0x01c06600 0 0x70>; + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sdm845", "snps,dw-pcie"; + reg = <0 0x01c08000 0 0x2000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ref", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1c00 0xf>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>, + <0x200 &apps_smmu 0x1c02 0x1>, + <0x300 &apps_smmu 0x1c03 0x1>, + <0x400 &apps_smmu 0x1c04 0x1>, + <0x500 &apps_smmu 0x1c05 0x1>, + <0x600 &apps_smmu 0x1c06 0x1>, + <0x700 &apps_smmu 0x1c07 0x1>, + <0x800 &apps_smmu 0x1c08 0x1>, + <0x900 &apps_smmu 0x1c09 0x1>, + <0xa00 &apps_smmu 0x1c0a 0x1>, + <0xb00 &apps_smmu 0x1c0b 0x1>, + <0xc00 &apps_smmu 0x1c0c 0x1>, + <0xd00 &apps_smmu 0x1c0d 0x1>, + <0xe00 &apps_smmu 0x1c0e 0x1>, + <0xf00 &apps_smmu 0x1c0f 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0a000 { + compatible = "qcom,sdm845-qhp-pcie-phy"; + reg = <0 0x01c0a000 0 0x800>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_CLK>, + <&gcc GCC_PCIE_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: lanes@1c06200 { + reg = <0 0x01c0a800 0 0x800>, + <0 0x01c0a800 0 0x800>, + <0 0x01c0b800 0 0x400>; + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + + mem_noc: interconnect@1380000 { + compatible = "qcom,sdm845-mem-noc"; + reg = <0 0x01380000 0 0x27200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect@14e0000 { + compatible = "qcom,sdm845-dc-noc"; + reg = <0 0x014e0000 0 0x400>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect@1500000 { + compatible = "qcom,sdm845-config-noc"; + reg = <0 0x01500000 0 0x5080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sdm845-system-noc"; + reg = <0 0x01620000 0 0x18080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sdm845-aggre1-noc"; + reg = <0 0x016e0000 0 0x15080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sdm845-aggre2-noc"; + reg = <0 0x01700000 0 0x1f300>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sdm845-mmss-noc"; + reg = <0 0x01740000 0 0x1c100>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -1435,6 +1759,44 @@ }; }; + ipa: ipa@1e40000 { + compatible = "qcom,sdm845-ipa"; + reg = <0 0x1e40000 0 0x7000>, + <0 0x1e47000 0 0x2000>, + <0 0x1e04000 0 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>, + <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA &mem_noc SLAVE_EBI1>, + <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>, + <&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; + interconnect-names = "memory", + "imem", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + modem-remoteproc = <&mss_pil>; + + status = "disabled"; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; reg = <0 0x01f40000 0 0x40000>; @@ -1837,6 +2199,142 @@ function = "qup15"; }; }; + + quat_mi2s_sleep: quat_mi2s_sleep { + mux { + pins = "gpio58", "gpio59"; + function = "gpio"; + }; + + config { + pins = "gpio58", "gpio59"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + quat_mi2s_active: quat_mi2s_active { + mux { + pins = "gpio58", "gpio59"; + function = "qua_mi2s"; + }; + + config { + pins = "gpio58", "gpio59"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; + + quat_mi2s_sd0_sleep: quat_mi2s_sd0_sleep { + mux { + pins = "gpio60"; + function = "gpio"; + }; + + config { + pins = "gpio60"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + quat_mi2s_sd0_active: quat_mi2s_sd0_active { + mux { + pins = "gpio60"; + function = "qua_mi2s"; + }; + + config { + pins = "gpio60"; + drive-strength = <8>; + bias-disable; + }; + }; + + quat_mi2s_sd1_sleep: quat_mi2s_sd1_sleep { + mux { + pins = "gpio61"; + function = "gpio"; + }; + + config { + pins = "gpio61"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + quat_mi2s_sd1_active: quat_mi2s_sd1_active { + mux { + pins = "gpio61"; + function = "qua_mi2s"; + }; + + config { + pins = "gpio61"; + drive-strength = <8>; + bias-disable; + }; + }; + + quat_mi2s_sd2_sleep: quat_mi2s_sd2_sleep { + mux { + pins = "gpio62"; + function = "gpio"; + }; + + config { + pins = "gpio62"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + quat_mi2s_sd2_active: quat_mi2s_sd2_active { + mux { + pins = "gpio62"; + function = "qua_mi2s"; + }; + + config { + pins = "gpio62"; + drive-strength = <8>; + bias-disable; + }; + }; + + quat_mi2s_sd3_sleep: quat_mi2s_sd3_sleep { + mux { + pins = "gpio63"; + function = "gpio"; + }; + + config { + pins = "gpio63"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; + + quat_mi2s_sd3_active: quat_mi2s_sd3_active { + mux { + pins = "gpio63"; + function = "qua_mi2s"; + }; + + config { + pins = "gpio63"; + drive-strength = <8>; + bias-disable; + }; + }; }; mss_pil: remoteproc@4080000 { @@ -1903,8 +2401,12 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; }; stm@6002000 { @@ -2386,6 +2888,87 @@ status = "disabled"; }; + slim: slim@171c0000 { + compatible = "qcom,slim-ngd-v2.1.0"; + reg = <0 0x171c0000 0 0x2c000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + + qcom,apps-ch-pipes = <0x780000>; + qcom,ea-pc = <0x270>; + status = "okay"; + dmas = <&slimbam 3>, <&slimbam 4>, + <&slimbam 5>, <&slimbam 6>; + dma-names = "rx", "tx", "tx2", "rx2"; + + iommus = <&apps_smmu 0x1806 0x0>; + #address-cells = <1>; + #size-cells = <0>; + + ngd@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + wcd9340_ifd: ifd@0{ + compatible = "slim217,250"; + reg = <0 0>; + }; + + wcd9340: codec@1{ + compatible = "slim217,250"; + reg = <1 0>; + slim-ifc-dev = <&wcd9340_ifd>; + + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + qcom,micbias1-millivolt = <1800>; + qcom,micbias2-millivolt = <1800>; + qcom,micbias3-millivolt = <1800>; + qcom,micbias4-millivolt = <1800>; + + #address-cells = <1>; + #size-cells = <1>; + + wcdgpio: gpio-controller@42 { + compatible = "qcom,wcd9340-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x42 0x2>; + }; + + swm: swm@c85 { + compatible = "qcom,soundwire-v1.3.0"; + reg = <0xc85 0x40>; + interrupts-extended = <&wcd9340 20>; + + qcom,dout-ports = <6>; + qcom,din-ports = <2>; + qcom,ports-sinterval-low =/bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>; + + #sound-dai-cells = <1>; + clocks = <&wcd9340>; + clock-names = "iface"; + #address-cells = <2>; + #size-cells = <0>; + + + }; + }; + }; + }; + + sound: sound { + }; + usb_1_hsphy: phy@88e2000 { compatible = "qcom,sdm845-qusb2-phy"; reg = <0 0x088e2000 0 0x400>; @@ -2570,39 +3153,42 @@ }; }; - video-codec@aa00000 { - compatible = "qcom,sdm845-venus"; + venus: video-codec@aa00000 { + compatible = "qcom,sdm845-venus-v2"; reg = <0 0x0aa00000 0 0xff000>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&videocc VENUS_GDSC>; + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>, + <&videocc VCODEC1_GDSC>; + power-domain-names = "venus", "vcodec0", "vcodec1"; clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, <&videocc VIDEO_CC_VENUS_AHB_CLK>, - <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>; - clock-names = "core", "iface", "bus"; + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "iface", "bus", + "vcodec0_core", "vcodec0_bus", + "vcodec1_core", "vcodec1_bus"; iommus = <&apps_smmu 0x10a0 0x8>, <&apps_smmu 0x10b0 0x0>; memory-region = <&venus_mem>; video-core0 { compatible = "venus-decoder"; - clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; - clock-names = "core", "bus"; - power-domains = <&videocc VCODEC0_GDSC>; }; video-core1 { compatible = "venus-encoder"; - clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; - clock-names = "core", "bus"; - power-domains = <&videocc VCODEC1_GDSC>; }; }; videocc: clock-controller@ab00000 { compatible = "qcom,sdm845-videocc"; reg = <0 0x0ab00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>; @@ -2933,6 +3519,24 @@ dispcc: clock-controller@af00000 { compatible = "qcom,sdm845-dispcc"; reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi1_phy 0>, + <&dsi1_phy 1>, + <0>, + <0>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk_src", + "gcc_disp_gpll0_div_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_link_clk_divsel_ten", + "dp_vco_divided_clk_src_mux"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -3098,6 +3702,13 @@ status = "disabled"; }; + gladiator_noc: interconnect@17900000 { + compatible = "qcom,sdm845-gladiator-noc"; + reg = <0 0x17900000 0 0xd080>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + watchdog@17980000 { compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt"; reg = <0 0x17980000 0 0x1000>; @@ -3127,6 +3738,10 @@ <WAKE_TCS 3>, <CONTROL_TCS 1>; + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + rpmhcc: clock-controller { compatible = "qcom,sdm845-rpmh-clk"; #clock-cells = <1>; @@ -3183,11 +3798,6 @@ }; }; }; - - rsc_hlos: interconnect { - compatible = "qcom,sdm845-rsc-hlos"; - #interconnect-cells = <1>; - }; }; intc: interrupt-controller@17a00000 { @@ -3210,6 +3820,18 @@ }; }; + slimbam: dma@17184000 { + compatible = "qcom,bam-v1.7.0"; + qcom,controlled-remotely; + reg = <0 0x17184000 0 0x2a000>; + num-channels = <31>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x1806 0x0>; + }; + timer@17c90000 { #address-cells = <2>; #size-cells = <2>; @@ -3268,6 +3890,16 @@ }; }; + osm_l3: interconnect@17d41000 { + compatible = "qcom,sdm845-osm-l3"; + reg = <0 0x17d41000 0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + cpufreq_hw: cpufreq@17d43000 { compatible = "qcom,cpufreq-hw"; reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; diff --git a/sys/gnu/dts/arm64/qcom/sdm850-lenovo-yoga-c630.dts b/sys/gnu/dts/arm64/qcom/sdm850-lenovo-yoga-c630.dts index b255be3a4a0a..51a670ad15b2 100644 --- a/sys/gnu/dts/arm64/qcom/sdm850-lenovo-yoga-c630.dts +++ b/sys/gnu/dts/arm64/qcom/sdm850-lenovo-yoga-c630.dts @@ -7,7 +7,10 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include "sdm845.dtsi" #include "pm8998.dtsi" @@ -353,6 +356,73 @@ status = "okay"; }; +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; +}; + +&sound { + compatible = "qcom,db845c-sndcard"; + model = "Lenovo-YOGA-C630-13Q50"; + + audio-routing = + "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "SpkrLeft IN", "SPK1 OUT", + "SpkrRight IN", "SPK2 OUT", + "MM_DL1", "MultiMedia1 Playback", + "MultiMedia2 Capture", "MM_UL2"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; + }; + }; +}; + &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; @@ -382,6 +452,15 @@ bias-pull-up; drive-strength = <2>; }; + + wcd_intr_default: wcd_intr_default { + pins = <54>; + function = "gpio"; + + input-enable; + bias-pull-down; + drive-strength = <2>; + }; }; &uart6 { @@ -465,3 +544,36 @@ vdda-phy-supply = <&vdda_usb2_ss_1p2>; vdda-pll-supply = <&vdda_usb2_ss_core>; }; + +&wcd9340{ + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + reset-gpios = <&tlmm 64 0>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + + swm: swm@c85 { + left_spkr: wsa8810-left{ + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: wsa8810-right{ + compatible = "sdw10217211000"; + powerdown-gpios = <&wcdgpio 3 GPIO_ACTIVE_HIGH>; + reg = <0 4>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; + }; +}; diff --git a/sys/gnu/dts/arm64/qcom/sm8250-mtp.dts b/sys/gnu/dts/arm64/qcom/sm8250-mtp.dts new file mode 100644 index 000000000000..224d0f1ea6f9 --- /dev/null +++ b/sys/gnu/dts/arm64/qcom/sm8250-mtp.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sm8250.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8250 MTP"; + compatible = "qcom,sm8250-mtp"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/sys/gnu/dts/arm64/qcom/sm8250.dtsi b/sys/gnu/dts/arm64/qcom/sm8250.dtsi new file mode 100644 index 000000000000..891d83b2afea --- /dev/null +++ b/sys/gnu/dts/arm64/qcom/sm8250.dtsi @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm"; + #reset-cells = <1>; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@80700000 { + reg = <0x0 0x80700000 0x0 0x160000>; + no-map; + }; + + cmd_db: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + + removed_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x5300000>; + no-map; + }; + + camera_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x500000>; + no-map; + }; + + wlan_mem: memory@86700000 { + reg = <0x0 0x86700000 0x0 0x100000>; + no-map; + }; + + ipa_fw_mem: memory@86800000 { + reg = <0x0 0x86800000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@86810000 { + reg = <0x0 0x86810000 0x0 0xa000>; + no-map; + }; + + gpu_mem: memory@8681a000 { + reg = <0x0 0x8681a000 0x0 0x2000>; + no-map; + }; + + npu_mem: memory@86900000 { + reg = <0x0 0x86900000 0x0 0x500000>; + no-map; + }; + + video_mem: memory@86e00000 { + reg = <0x0 0x86e00000 0x0 0x500000>; + no-map; + }; + + cvp_mem: memory@87300000 { + reg = <0x0 0x87300000 0x0 0x500000>; + no-map; + }; + + cdsp_mem: memory@87800000 { + reg = <0x0 0x87800000 0x0 0x1400000>; + no-map; + }; + + slpi_mem: memory@88c00000 { + reg = <0x0 0x88c00000 0x0 0x1500000>; + no-map; + }; + + adsp_mem: memory@8a100000 { + reg = <0x0 0x8a100000 0x0 0x1d00000>; + no-map; + }; + + spss_mem: memory@8be00000 { + reg = <0x0 0x8be00000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@8bf00000 { + reg = <0x0 0x8bf00000 0x0 0x4600000>; + no-map; + }; + }; + + smem: qcom,smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8250"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc 133>, <&gcc 134>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart2: serial@a90000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc 113>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8250-pdc"; + reg = <0x0b220000 0x30000>, <0x17c000f0 0x60>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>, <126 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + spmi: qcom,spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x0001100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x0100000>, + <0x0 0x0e700000 0x0 0x00a0000>, + <0x0 0x0c40a000 0x0 0x0026000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + apps_rsc: rsc@18200000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sm8250-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0x0 0x01f40000 0x0 0x40000>; + }; + + timer@17c20000 { + #address-cells = <2>; + #size-cells = <2>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c21000 0x0 0x1000>, + <0x0 0x17c22000 0x0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c23000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c25000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c27000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c29000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/sys/gnu/dts/arm64/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts b/sys/gnu/dts/arm64/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts new file mode 100644 index 000000000000..2ab5edd84e9b --- /dev/null +++ b/sys/gnu/dts/arm64/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M sub board connected to an + * Advantech IDK-1110WR 10.1" LVDS panel + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a774a1-hihope-rzg2m-ex.dts" +#include "rzg2-advantech-idk-1110wr-panel.dtsi" + +/ { + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 50000>; + + brightness-levels = <0 2 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + +}; + +&gpio1 { + /* + * When GP1_20 is LOW LVDS0 is connected to the LVDS connector + * When GP1_20 is HIGH LVDS0 is connected to the LT8918L + */ + lvds-connector-en-gpio { + gpio-hog; + gpios = <20 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "lvds-connector-en-gpio"; + }; +}; + +&lvds0 { + status = "okay"; +}; + +&pfc { + pwm0_pins: pwm0 { + groups = "pwm0"; + function = "pwm0"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/sys/gnu/dts/arm64/renesas/r8a774a1.dtsi b/sys/gnu/dts/arm64/renesas/r8a774a1.dtsi index 8f950dabca54..79023433a740 100644 --- a/sys/gnu/dts/arm64/renesas/r8a774a1.dtsi +++ b/sys/gnu/dts/arm64/renesas/r8a774a1.dtsi @@ -2634,13 +2634,14 @@ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>; clock-names = "du.0", "du.1", "du.2"; + resets = <&cpg 724>, <&cpg 722>; + reset-names = "du.0", "du.2"; status = "disabled"; - vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; + renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; ports { #address-cells = <1>; diff --git a/sys/gnu/dts/arm64/renesas/r8a774b1.dtsi b/sys/gnu/dts/arm64/renesas/r8a774b1.dtsi index c40ea300968e..3137f735974b 100644 --- a/sys/gnu/dts/arm64/renesas/r8a774b1.dtsi +++ b/sys/gnu/dts/arm64/renesas/r8a774b1.dtsi @@ -2480,13 +2480,14 @@ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.3"; + resets = <&cpg 724>, <&cpg 722>; + reset-names = "du.0", "du.3"; status = "disabled"; - vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; + renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; ports { #address-cells = <1>; diff --git a/sys/gnu/dts/arm64/renesas/r8a774c0.dtsi b/sys/gnu/dts/arm64/renesas/r8a774c0.dtsi index a53cd5fcc401..22785cbddff5 100644 --- a/sys/gnu/dts/arm64/renesas/r8a774c0.dtsi +++ b/sys/gnu/dts/arm64/renesas/r8a774c0.dtsi @@ -1810,10 +1810,12 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; - vsps = <&vspd0 0>, <&vspd1 0>; + resets = <&cpg 724>; + reset-names = "du.0"; + renesas,vsps = <&vspd0 0>, <&vspd1 0>; + status = "disabled"; ports { diff --git a/sys/gnu/dts/arm64/renesas/r8a77950.dtsi b/sys/gnu/dts/arm64/renesas/r8a77950.dtsi index 15216495e1c8..3975eecd50c4 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77950.dtsi +++ b/sys/gnu/dts/arm64/renesas/r8a77950.dtsi @@ -30,7 +30,7 @@ }; &du { - vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>; + renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>; }; &fcpvb1 { diff --git a/sys/gnu/dts/arm64/renesas/r8a77951.dtsi b/sys/gnu/dts/arm64/renesas/r8a77951.dtsi index a8729eb744db..52229546454c 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77951.dtsi +++ b/sys/gnu/dts/arm64/renesas/r8a77951.dtsi @@ -3177,14 +3177,15 @@ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 721>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.2", "du.3"; + resets = <&cpg 724>, <&cpg 722>; + reset-names = "du.0", "du.2"; renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>; - vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; + renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, + <&vspd0 1>; status = "disabled"; diff --git a/sys/gnu/dts/arm64/renesas/r8a77960.dtsi b/sys/gnu/dts/arm64/renesas/r8a77960.dtsi index 60f156cfd2d6..31282367d3ac 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77960.dtsi +++ b/sys/gnu/dts/arm64/renesas/r8a77960.dtsi @@ -862,6 +862,15 @@ status = "disabled"; }; + arm_cc630p: crypto@e6601000 { + compatible = "arm,cryptocell-630p-ree"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0xe6601000 0 0x1000>; + clocks = <&cpg CPG_MOD 229>; + resets = <&cpg 229>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; @@ -2818,13 +2827,14 @@ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>; clock-names = "du.0", "du.1", "du.2"; + resets = <&cpg 724>, <&cpg 722>; + reset-names = "du.0", "du.2"; renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>; - vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; + renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; status = "disabled"; diff --git a/sys/gnu/dts/arm64/renesas/r8a77961-salvator-xs.dts b/sys/gnu/dts/arm64/renesas/r8a77961-salvator-xs.dts index 4abd78ac1cd5..2ffc7e31dd58 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77961-salvator-xs.dts +++ b/sys/gnu/dts/arm64/renesas/r8a77961-salvator-xs.dts @@ -19,7 +19,7 @@ reg = <0x0 0x48000000 0x0 0x78000000>; }; - memory@400000000 { + memory@480000000 { device_type = "memory"; reg = <0x4 0x80000000 0x0 0x80000000>; }; diff --git a/sys/gnu/dts/arm64/renesas/r8a77961-ulcb.dts b/sys/gnu/dts/arm64/renesas/r8a77961-ulcb.dts new file mode 100644 index 000000000000..7c6e60f6f32d --- /dev/null +++ b/sys/gnu/dts/arm64/renesas/r8a77961-ulcb.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car + * M3-W+ + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a77961.dtsi" +#include "ulcb.dtsi" + +/ { + model = "Renesas M3ULCB board based on r8a77961"; + compatible = "renesas,m3ulcb", "renesas,r8a77961"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; +}; diff --git a/sys/gnu/dts/arm64/renesas/r8a77961.dtsi b/sys/gnu/dts/arm64/renesas/r8a77961.dtsi index be3824bda632..0d96f2d3492b 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77961.dtsi +++ b/sys/gnu/dts/arm64/renesas/r8a77961.dtsi @@ -474,6 +474,20 @@ #power-domain-cells = <1>; }; + tsc: thermal@e6198000 { + compatible = "renesas,r8a77961-thermal"; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + }; + intc_ex: interrupt-controller@e61c0000 { #interrupt-cells = <2>; interrupt-controller; @@ -629,6 +643,15 @@ /* placeholder */ }; + arm_cc630p: crypto@e6601000 { + compatible = "arm,cryptocell-630p-ree"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0xe6601000 0 0x1000>; + clocks = <&cpg CPG_MOD 229>; + resets = <&cpg 229>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a77961", "renesas,rcar-dmac"; @@ -861,6 +884,7 @@ rcar_sound,ssi { ssi0: ssi-0 { }; ssi1: ssi-1 { }; + ssi2: ssi-2 { }; }; }; @@ -1064,6 +1088,71 @@ }; }; + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + sustainable-power = <3874>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + sustainable-power = <3874>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + sustainable-power = <3874>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 2 4>; + contribution = <1024>; + }; + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; + trips { + target: trip-point1 { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/sys/gnu/dts/arm64/renesas/r8a77965.dtsi b/sys/gnu/dts/arm64/renesas/r8a77965.dtsi index c17d90bd160e..d82dd4e67b62 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77965.dtsi +++ b/sys/gnu/dts/arm64/renesas/r8a77965.dtsi @@ -111,6 +111,7 @@ power-domains = <&sysc R8A77965_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A77965_CLK_Z>; @@ -124,6 +125,7 @@ power-domains = <&sysc R8A77965_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A77965_CLK_Z>; operating-points-v2 = <&cluster0_opp>; }; @@ -134,6 +136,19 @@ cache-unified; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + }; }; extal_clk: extal { @@ -717,6 +732,15 @@ status = "disabled"; }; + arm_cc630p: crypto@e6601000 { + compatible = "arm,cryptocell-630p-ree"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0xe6601000 0 0x1000>; + clocks = <&cpg CPG_MOD 229>; + resets = <&cpg 229>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a77965", "renesas,rcar-dmac"; @@ -2494,13 +2518,14 @@ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.3"; + resets = <&cpg 724>, <&cpg 722>; + reset-names = "du.0", "du.3"; renesas,cmms = <&cmm0>, <&cmm1>, <&cmm3>; - vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; + renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; status = "disabled"; diff --git a/sys/gnu/dts/arm64/renesas/r8a77970-eagle.dts b/sys/gnu/dts/arm64/renesas/r8a77970-eagle.dts index 2afb91ec9c8d..ac2156ab3e62 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77970-eagle.dts +++ b/sys/gnu/dts/arm64/renesas/r8a77970-eagle.dts @@ -137,8 +137,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/sys/gnu/dts/arm64/renesas/r8a77970-v3msk.dts b/sys/gnu/dts/arm64/renesas/r8a77970-v3msk.dts index d7c7b9156e08..01c4ba0f7be1 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77970-v3msk.dts +++ b/sys/gnu/dts/arm64/renesas/r8a77970-v3msk.dts @@ -150,8 +150,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/sys/gnu/dts/arm64/renesas/r8a77970.dtsi b/sys/gnu/dts/arm64/renesas/r8a77970.dtsi index 664a73a2cc69..a009c0ebc8b4 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77970.dtsi +++ b/sys/gnu/dts/arm64/renesas/r8a77970.dtsi @@ -1121,7 +1121,9 @@ clock-names = "du.0"; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 724>; - vsps = <&vspd0 0>; + reset-names = "du.0"; + renesas,vsps = <&vspd0 0>; + status = "disabled"; ports { diff --git a/sys/gnu/dts/arm64/renesas/r8a77980-condor.dts b/sys/gnu/dts/arm64/renesas/r8a77980-condor.dts index 3dde028e22a6..ef8350a062af 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77980-condor.dts +++ b/sys/gnu/dts/arm64/renesas/r8a77980-condor.dts @@ -174,8 +174,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/sys/gnu/dts/arm64/renesas/r8a77980-v3hsk.dts b/sys/gnu/dts/arm64/renesas/r8a77980-v3hsk.dts index adbfd8f07d06..6dff04693223 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77980-v3hsk.dts +++ b/sys/gnu/dts/arm64/renesas/r8a77980-v3hsk.dts @@ -141,8 +141,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/sys/gnu/dts/arm64/renesas/r8a77980.dtsi b/sys/gnu/dts/arm64/renesas/r8a77980.dtsi index b340fb469999..d672b320bc14 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77980.dtsi +++ b/sys/gnu/dts/arm64/renesas/r8a77980.dtsi @@ -1318,6 +1318,7 @@ ipmmu_vip0: mmu@e7b00000 { compatible = "renesas,ipmmu-r8a77980"; reg = <0 0xe7b00000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -1325,6 +1326,7 @@ ipmmu_vip1: mmu@e7960000 { compatible = "renesas,ipmmu-r8a77980"; reg = <0 0xe7960000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 11>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -1484,15 +1486,16 @@ }; du: display@feb00000 { - compatible = "renesas,du-r8a77980", - "renesas,du-r8a77970"; + compatible = "renesas,du-r8a77980"; reg = <0 0xfeb00000 0 0x80000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>; clock-names = "du.0"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 724>; - vsps = <&vspd0 0>; + reset-names = "du.0"; + renesas,vsps = <&vspd0 0>; + status = "disabled"; ports { diff --git a/sys/gnu/dts/arm64/renesas/r8a77990-ebisu.dts b/sys/gnu/dts/arm64/renesas/r8a77990-ebisu.dts index 4fd2b14fbb8b..dc24cec46ae1 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77990-ebisu.dts +++ b/sys/gnu/dts/arm64/renesas/r8a77990-ebisu.dts @@ -360,8 +360,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/sys/gnu/dts/arm64/renesas/r8a77990.dtsi b/sys/gnu/dts/arm64/renesas/r8a77990.dtsi index 32d91f210246..1543f18e834f 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77990.dtsi +++ b/sys/gnu/dts/arm64/renesas/r8a77990.dtsi @@ -88,6 +88,7 @@ power-domains = <&sysc R8A77990_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; dynamic-power-coefficient = <277>; clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; @@ -100,6 +101,7 @@ power-domains = <&sysc R8A77990_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -110,6 +112,19 @@ cache-unified; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; }; extal_clk: extal { @@ -667,6 +682,15 @@ dma-channels = <2>; }; + arm_cc630p: crypto@e6601000 { + compatible = "arm,cryptocell-630p-ree"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0xe6601000 0 0x1000>; + clocks = <&cpg CPG_MOD 229>; + resets = <&cpg 229>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a77990", "renesas,rcar-dmac"; @@ -1784,14 +1808,13 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; resets = <&cpg 724>; reset-names = "du.0"; renesas,cmms = <&cmm0>, <&cmm1>; - vsps = <&vspd0 0>, <&vspd1 0>; + renesas,vsps = <&vspd0 0>, <&vspd1 0>; status = "disabled"; diff --git a/sys/gnu/dts/arm64/renesas/r8a77995-draak.dts b/sys/gnu/dts/arm64/renesas/r8a77995-draak.dts index 67634cb01d6b..79c73a99d2fe 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77995-draak.dts +++ b/sys/gnu/dts/arm64/renesas/r8a77995-draak.dts @@ -272,8 +272,8 @@ hdmi-encoder@39 { compatible = "adi,adv7511w"; - reg = <0x39>, <0x3f>, <0x38>, <0x3c>; - reg-names = "main", "edid", "packet", "cec"; + reg = <0x39>, <0x3f>, <0x3c>, <0x38>; + reg-names = "main", "edid", "cec", "packet"; interrupt-parent = <&gpio1>; interrupts = <28 IRQ_TYPE_LEVEL_LOW>; @@ -284,8 +284,6 @@ adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>; diff --git a/sys/gnu/dts/arm64/renesas/r8a77995.dtsi b/sys/gnu/dts/arm64/renesas/r8a77995.dtsi index 9503007c34c0..e8d2290fe79d 100644 --- a/sys/gnu/dts/arm64/renesas/r8a77995.dtsi +++ b/sys/gnu/dts/arm64/renesas/r8a77995.dtsi @@ -389,6 +389,15 @@ dma-channels = <2>; }; + arm_cc630p: crypto@e6601000 { + compatible = "arm,cryptocell-630p-ree"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0xe6601000 0 0x1000>; + clocks = <&cpg CPG_MOD 229>; + resets = <&cpg 229>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + }; + canfd: can@e66c0000 { compatible = "renesas,r8a77995-canfd", "renesas,rcar-gen3-canfd"; @@ -1017,14 +1026,13 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; resets = <&cpg 724>; reset-names = "du.0"; renesas,cmms = <&cmm0>, <&cmm1>; - vsps = <&vspd0 0>, <&vspd1 0>; + renesas,vsps = <&vspd0 0>, <&vspd1 0>; status = "disabled"; diff --git a/sys/gnu/dts/arm64/rockchip/px30.dtsi b/sys/gnu/dts/arm64/rockchip/px30.dtsi index 75908c587511..adc9b8bf5eaa 100644 --- a/sys/gnu/dts/arm64/rockchip/px30.dtsi +++ b/sys/gnu/dts/arm64/rockchip/px30.dtsi @@ -143,7 +143,7 @@ }; arm-pmu { - compatible = "arm,cortex-a53-pmu"; + compatible = "arm,cortex-a35-pmu"; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, @@ -413,27 +413,30 @@ lvds: lvds { compatible = "rockchip,px30-lvds"; - #address-cells = <1>; - #size-cells = <0>; phys = <&dsi_dphy>; phy-names = "dphy"; rockchip,grf = <&grf>; rockchip,output = "lvds"; status = "disabled"; - port@0 { - reg = <0>; + ports { #address-cells = <1>; #size-cells = <0>; - lvds_vopb_in: endpoint@0 { + port@0 { reg = <0>; - remote-endpoint = <&vopb_out_lvds>; - }; - - lvds_vopl_in: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_lvds>; + #address-cells = <1>; + #size-cells = <0>; + + lvds_vopb_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_lvds>; + }; + + lvds_vopl_in: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_lvds>; + }; }; }; }; @@ -700,7 +703,7 @@ clock-names = "pclk", "timer"; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -870,7 +873,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy_otg>; phy-names = "usb2-phy"; power-domains = <&power PX30_PD_USB>; @@ -882,7 +884,6 @@ reg = <0x0 0xff340000 0x0 0x10000>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST>; - clock-names = "usbhost"; phys = <&u2phy_host>; phy-names = "usb"; power-domains = <&power PX30_PD_USB>; @@ -894,7 +895,6 @@ reg = <0x0 0xff350000 0x0 0x10000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST>; - clock-names = "usbhost"; phys = <&u2phy_host>; phy-names = "usb"; power-domains = <&power PX30_PD_USB>; @@ -1031,7 +1031,6 @@ reset-names = "axi", "ahb", "dclk"; iommus = <&vopb_mmu>; power-domains = <&power PX30_PD_VO>; - rockchip,grf = <&grf>; status = "disabled"; vopb_out: port { @@ -1073,7 +1072,6 @@ reset-names = "axi", "ahb", "dclk"; iommus = <&vopl_mmu>; power-domains = <&power PX30_PD_VO>; - rockchip,grf = <&grf>; status = "disabled"; vopl_out: port { diff --git a/sys/gnu/dts/arm64/rockchip/rk3308.dtsi b/sys/gnu/dts/arm64/rockchip/rk3308.dtsi index 116f1900effb..ac7f694079d0 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3308.dtsi +++ b/sys/gnu/dts/arm64/rockchip/rk3308.dtsi @@ -40,7 +40,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a35", "arm,armv8"; + compatible = "arm,cortex-a35"; reg = <0x0 0x0>; enable-method = "psci"; clocks = <&cru ARMCLK>; @@ -53,7 +53,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a35", "arm,armv8"; + compatible = "arm,cortex-a35"; reg = <0x0 0x1>; enable-method = "psci"; operating-points-v2 = <&cpu0_opp_table>; @@ -63,7 +63,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a35", "arm,armv8"; + compatible = "arm,cortex-a35"; reg = <0x0 0x2>; enable-method = "psci"; operating-points-v2 = <&cpu0_opp_table>; @@ -73,7 +73,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a35", "arm,armv8"; + compatible = "arm,cortex-a35"; reg = <0x0 0x3>; enable-method = "psci"; operating-points-v2 = <&cpu0_opp_table>; @@ -127,7 +127,7 @@ }; arm-pmu { - compatible = "arm,cortex-a53-pmu"; + compatible = "arm,cortex-a35-pmu"; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, @@ -513,7 +513,7 @@ status = "disabled"; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; diff --git a/sys/gnu/dts/arm64/rockchip/rk3328-a1.dts b/sys/gnu/dts/arm64/rockchip/rk3328-a1.dts index 16f1656d5203..797e90a3ac92 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3328-a1.dts +++ b/sys/gnu/dts/arm64/rockchip/rk3328-a1.dts @@ -60,6 +60,7 @@ }; &codec { + mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/sys/gnu/dts/arm64/rockchip/rk3328-evb.dts b/sys/gnu/dts/arm64/rockchip/rk3328-evb.dts index 49c4b96da3d4..ac29c2744d08 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3328-evb.dts +++ b/sys/gnu/dts/arm64/rockchip/rk3328-evb.dts @@ -82,17 +82,16 @@ &gmac2phy { phy-supply = <&vcc_phy>; clock_in_out = "output"; - assigned-clocks = <&cru SCLK_MAC2PHY_SRC>; assigned-clock-rate = <50000000>; assigned-clocks = <&cru SCLK_MAC2PHY>; assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>; - + status = "okay"; }; &i2c1 { status = "okay"; - rk805: rk805@18 { + rk805: pmic@18 { compatible = "rockchip,rk805"; reg = <0x18>; interrupt-parent = <&gpio2>; diff --git a/sys/gnu/dts/arm64/rockchip/rk3328-rock64.dts b/sys/gnu/dts/arm64/rockchip/rk3328-rock64.dts index 62936b432f9a..ebf3eb222e1f 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3328-rock64.dts +++ b/sys/gnu/dts/arm64/rockchip/rk3328-rock64.dts @@ -104,6 +104,7 @@ }; &codec { + mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; status = "okay"; port@0 { @@ -169,7 +170,7 @@ &i2c1 { status = "okay"; - rk805: rk805@18 { + rk805: pmic@18 { compatible = "rockchip,rk805"; reg = <0x18>; interrupt-parent = <&gpio2>; diff --git a/sys/gnu/dts/arm64/rockchip/rk3328.dtsi b/sys/gnu/dts/arm64/rockchip/rk3328.dtsi index 1f53ead52c7f..a4d591d91533 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3328.dtsi +++ b/sys/gnu/dts/arm64/rockchip/rk3328.dtsi @@ -142,7 +142,7 @@ }; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -299,8 +299,6 @@ grf: syscon@ff100000 { compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd"; reg = <0x0 0xff100000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; io_domains: io-domains { compatible = "rockchip,rk3328-io-voltage-domain"; @@ -906,6 +904,7 @@ resets = <&cru SRST_GMAC2IO_A>; reset-names = "stmmaceth"; rockchip,grf = <&grf>; + snps,txpbl = <0x4>; status = "disabled"; }; @@ -927,6 +926,7 @@ reset-names = "stmmaceth", "mac-phy"; phy-mode = "rmii"; phy-handle = <&phy>; + snps,txpbl = <0x4>; status = "disabled"; mdio { @@ -957,7 +957,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy_otg>; phy-names = "usb2-phy"; status = "disabled"; @@ -968,7 +967,6 @@ reg = <0x0 0xff5c0000 0x0 0x10000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy>; - clock-names = "usbhost", "utmi"; phys = <&u2phy_host>; phy-names = "usb"; status = "disabled"; @@ -979,7 +977,6 @@ reg = <0x0 0xff5d0000 0x0 0x10000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy>; - clock-names = "usbhost", "utmi"; phys = <&u2phy_host>; phy-names = "usb"; status = "disabled"; @@ -1795,10 +1792,6 @@ }; gmac2phy { - fephyled_speed100: fephyled-speed100 { - rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>; - }; - fephyled_speed10: fephyled-speed10 { rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>; }; @@ -1807,18 +1800,6 @@ rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>; }; - fephyled_rxm0: fephyled-rxm0 { - rockchip,pins = <0 RK_PD5 1 &pcfg_pull_none>; - }; - - fephyled_txm0: fephyled-txm0 { - rockchip,pins = <0 RK_PD5 2 &pcfg_pull_none>; - }; - - fephyled_linkm0: fephyled-linkm0 { - rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>; - }; - fephyled_rxm1: fephyled-rxm1 { rockchip,pins = <2 RK_PD1 2 &pcfg_pull_none>; }; diff --git a/sys/gnu/dts/arm64/rockchip/rk3368-px5-evb.dts b/sys/gnu/dts/arm64/rockchip/rk3368-px5-evb.dts index 231db0305a03..5ffd7b4d3036 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3368-px5-evb.dts +++ b/sys/gnu/dts/arm64/rockchip/rk3368-px5-evb.dts @@ -239,7 +239,6 @@ cap-mmc-highspeed; cap-sd-highspeed; card-detect-delay = <200>; - no-emmc; no-sdio; sd-uhs-sdr12; sd-uhs-sdr25; diff --git a/sys/gnu/dts/arm64/rockchip/rk3368.dtsi b/sys/gnu/dts/arm64/rockchip/rk3368.dtsi index a0df61c61925..1ebb0eef42da 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3368.dtsi +++ b/sys/gnu/dts/arm64/rockchip/rk3368.dtsi @@ -136,7 +136,7 @@ }; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -513,7 +513,6 @@ reg = <0x0 0xff500000 0x0 0x100>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>; - clock-names = "usbhost"; status = "disabled"; }; diff --git a/sys/gnu/dts/arm64/rockchip/rk3399-evb.dts b/sys/gnu/dts/arm64/rockchip/rk3399-evb.dts index 77008dca45bc..694b0d08d644 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3399-evb.dts +++ b/sys/gnu/dts/arm64/rockchip/rk3399-evb.dts @@ -9,8 +9,7 @@ / { model = "Rockchip RK3399 Evaluation Board"; - compatible = "rockchip,rk3399-evb", "rockchip,rk3399", - "google,rk3399evb-rev2"; + compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; backlight: backlight { compatible = "pwm-backlight"; @@ -48,10 +47,22 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; default-brightness-level = <200>; - enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; pwms = <&pwm0 0 25000 0>; }; + edp_panel: edp-panel { + compatible ="lg,lp079qx1-sp0v"; + backlight = <&backlight>; + enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + power-supply = <&vcc3v3_s0>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -114,6 +125,24 @@ }; +&edp { + status = "okay"; + force-hpd; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + &emmc_phy { status = "okay"; }; @@ -134,6 +163,228 @@ status = "okay"; }; +&i2c0 { + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc1v8_pmu>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_tp: LDO_REG2 { + regulator-name = "vcc3v0_tp"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + &pwm0 { status = "okay"; }; @@ -210,11 +461,6 @@ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - - pmic_dvs2: pmic-dvs2 { - rockchip,pins = - <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; - }; }; usb2 { @@ -224,3 +470,11 @@ }; }; }; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; diff --git a/sys/gnu/dts/arm64/rockchip/rk3399-gru-chromebook.dtsi b/sys/gnu/dts/arm64/rockchip/rk3399-gru-chromebook.dtsi index 7cd6d470c1cb..1384dabbdf40 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3399-gru-chromebook.dtsi +++ b/sys/gnu/dts/arm64/rockchip/rk3399-gru-chromebook.dtsi @@ -291,11 +291,9 @@ ap_i2c_tp: &i2c5 { #pwm-cells = <1>; }; - usbc_extcon1: extcon@1 { + usbc_extcon1: extcon1 { compatible = "google,extcon-usbc-cros-ec"; google,usb-port-id = <1>; - - #extcon-cells = <0>; }; }; diff --git a/sys/gnu/dts/arm64/rockchip/rk3399-gru.dtsi b/sys/gnu/dts/arm64/rockchip/rk3399-gru.dtsi index dd5624975c9b..2f3997740068 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3399-gru.dtsi +++ b/sys/gnu/dts/arm64/rockchip/rk3399-gru.dtsi @@ -570,11 +570,9 @@ ap_i2c_audio: &i2c8 { #size-cells = <0>; }; - usbc_extcon0: extcon@0 { + usbc_extcon0: extcon0 { compatible = "google,extcon-usbc-cros-ec"; google,usb-port-id = <0>; - - #extcon-cells = <0>; }; }; }; diff --git a/sys/gnu/dts/arm64/rockchip/rk3399-hugsun-x99.dts b/sys/gnu/dts/arm64/rockchip/rk3399-hugsun-x99.dts index d69a613fb65a..aee484a05181 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3399-hugsun-x99.dts +++ b/sys/gnu/dts/arm64/rockchip/rk3399-hugsun-x99.dts @@ -29,6 +29,26 @@ regulator-max-microvolt = <5000000>; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_rx>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&power_led_gpio>; + + led-0 { + label = "blue:power"; + gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "default-on"; + }; + }; + vcc_sys: vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -483,6 +503,18 @@ }; }; + ir { + ir_rx: ir-rx { + rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>; + }; + }; + + leds { + power_led_gpio: power-led-gpio { + rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = @@ -539,10 +571,6 @@ }; }; -&pwm0 { - status = "okay"; -}; - &pwm2 { status = "okay"; pinctrl-0 = <&pwm2_pin_pull_down>; @@ -555,7 +583,7 @@ &sdmmc { clock-frequency = <150000000>; - clock-freq-min-max = <200000 150000000>; + max-frequency = <150000000>; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; @@ -610,7 +638,6 @@ &spi1 { status = "okay"; - max-freq = <10000000>; flash@0 { compatible = "jedec,spi-nor"; diff --git a/sys/gnu/dts/arm64/rockchip/rk3399-orangepi.dts b/sys/gnu/dts/arm64/rockchip/rk3399-orangepi.dts index 9c659f3115c8..f9f7246d4d2f 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3399-orangepi.dts +++ b/sys/gnu/dts/arm64/rockchip/rk3399-orangepi.dts @@ -202,14 +202,27 @@ clock_in_out = "input"; phy-supply = <&vcc3v3_s3>; phy-mode = "rgmii"; + phy-handle = <&rtl8211e>; pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; + pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211e: phy@1 { + reg = <1>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; + }; }; &gpu { @@ -419,6 +432,8 @@ compatible = "silergy,syr827"; reg = <0x40>; fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&cpu_b_sleep>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -436,6 +451,8 @@ compatible = "silergy,syr828"; reg = <0x41>; fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpu_sleep>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -537,7 +554,25 @@ }; }; + phy { + phy_intb: phy-intb { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rstb: phy-rstb { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { + cpu_b_sleep: cpu-b-sleep { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + gpu_sleep: gpu-sleep { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/sys/gnu/dts/arm64/rockchip/rk3399-pinebook-pro.dts b/sys/gnu/dts/arm64/rockchip/rk3399-pinebook-pro.dts new file mode 100644 index 000000000000..c49982dfd8fc --- /dev/null +++ b/sys/gnu/dts/arm64/rockchip/rk3399-pinebook-pro.dts @@ -0,0 +1,1097 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org> + */ + +/dts-v1/; +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/usb/pd.h> +#include <dt-bindings/leds/common.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Pine64 Pinebook Pro"; + compatible = "pine64,pinebook-pro", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + backlight: edp-backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_12v>; + pwms = <&pwm0 0 740740 0>; + }; + + edp_panel: edp-panel { + compatible = "boe,nv140fhmn49"; + backlight = <&backlight>; + enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_en_gpio>; + power-supply = <&vcc3v3_panel>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + panel_in_edp: endpoint@0 { + reg = <0>; + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + }; + + /* + * Use separate nodes for gpio-keys to allow for selective deactivation + * of wakeup sources via sysfs without disabling the whole key + */ + gpio-key-lid { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&lidbtn_gpio>; + + lid { + debounce-interval = <20>; + gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>; + label = "Lid"; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + }; + }; + + gpio-key-power { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn_gpio>; + + power { + debounce-interval = <20>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwrled_gpio &slpled_gpio>; + + green-led { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + label = "green:power"; + }; + + red-led { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_STANDBY; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + label = "red:standby"; + panic-indicator; + retain-state-suspended; + }; + }; + + /* Power sequence for SDIO WiFi module */ + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h_gpio>; + post-power-on-delay-ms = <100>; + power-off-delay-us = <500000>; + + /* WL_REG_ON on module */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + /* Audio components */ + es8316-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det_gpio>; + simple-audio-card,name = "rockchip,es8316-codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Speaker"; + simple-audio-card,routing = + "MIC1", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Speaker Amplifier INL", "HPOL", + "Speaker Amplifier INR", "HPOR", + "Speaker", "Speaker Amplifier OUTL", + "Speaker", "Speaker Amplifier OUTR"; + + simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; + simple-audio-card,aux-devs = <&speaker_amp>; + simple-audio-card,pin-switches = "Speaker"; + + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + + simple-audio-card,codec { + sound-dai = <&es8316>; + }; + }; + + speaker_amp: speaker-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Speaker Amplifier"; + VCC-supply = <&pa_5v>; + }; + + /* Power tree */ + /* Root power source */ + vcc_sysin: vcc-sysin { + compatible = "regulator-fixed"; + regulator-name = "vcc_sysin"; + regulator-always-on; + regulator-boot-on; + }; + + /* Regulators supplied by vcc_sysin */ + /* LCD backlight supply */ + vcc_12v: vcc-12v { + compatible = "regulator-fixed"; + regulator-name = "vcc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&vcc_sysin>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Main 3.3 V supply */ + vcc3v3_sys: wifi_bat: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sysin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + /* 5 V USB power supply */ + vcc5v0_usb: pa_5v: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_5v_gpio>; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_sysin>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* RK3399 logic supply */ + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc_sysin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + /* Regulators supplied by vcc3v3_sys */ + /* 0.9 V supply, always on */ + vcc_0v9: vcc-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vcc_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + /* S3 1.8 V supply, switched by vcc1v8_s3 */ + vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcca1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + /* micro SD card power */ + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h_gpio>; + regulator-name = "vcc3v0_sd"; + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* LCD panel power, called VCC3V3_S0 in schematic */ + vcc3v3_panel: vcc3v3-panel { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcdvcc_en_gpio>; + regulator-name = "vcc3v3_panel"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <100000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* M.2 adapter power, switched by vcc1v8_s3 */ + vcc3v3_ssd: vcc3v3-ssd { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_ssd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + /* Regulators supplied by vcc5v0_usb */ + /* USB 3 port power supply regulator */ + vcc5v0_otg: vcc5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en_gpio>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Regulators supplied by vcc5v0_usb */ + /* Type C port power supply regulator */ + vbus_5vout: vbus_typec: vbus-5vout { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec0_en_gpio>; + regulator-name = "vbus_5vout"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Regulators supplied by vcc_1v8 */ + /* Primary 0.9 V LDO */ + vcca0v9_s3: vcca0v9-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc0v9_s3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_1v8>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + mains_charger: dc-charger { + compatible = "gpio-charger"; + charger-type = "mains"; + gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>; + + /* Also triggered by USB charger */ + pinctrl-names = "default"; + pinctrl-0 = <&dc_det_gpio>; + }; +}; + +&cdn_dp { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&edp { + force-hpd; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + status = "okay"; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +&emmc_phy { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <4>; + i2c-scl-rising-time-ns = <168>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio3>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l_gpio>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sysin>; + vcc2-supply = <&vcc_sysin>; + vcc3-supply = <&vcc_sysin>; + vcc4-supply = <&vcc_sysin>; + vcc6-supply = <&vcc_sysin>; + vcc7-supply = <&vcc_sysin>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sysin>; + vcc10-supply = <&vcc_sysin>; + vcc11-supply = <&vcc_sysin>; + vcc12-supply = <&vcc3v3_sys>; + vcc13-supply = <&vcc_sysin>; + vcc14-supply = <&vcc_sysin>; + + regulators { + /* rk3399 center logic supply */ + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: vcc_wl: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + /* not used */ + LDO_REG1 { + }; + + /* not used */ + LDO_REG2 { + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-name = "vcc1v8_pmupll"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + vin-supply = <&vcc_1v8>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + vin-supply = <&vcc_1v8>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + i2c-scl-falling-time-ns = <4>; + i2c-scl-rising-time-ns = <168>; + status = "okay"; + + es8316: es8316@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&i2c3 { + i2c-scl-falling-time-ns = <15>; + i2c-scl-rising-time-ns = <450>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-falling-time-ns = <20>; + i2c-scl-rising-time-ns = <600>; + status = "okay"; + + fusb0: fusb30x@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int_gpio>; + vbus-supply = <&vbus_typec>; + + connector { + compatible = "usb-c-connector"; + data-role = "host"; + label = "USB-C"; + op-sink-microwatt = <1000000>; + power-role = "dual"; + sink-pdos = + <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>; + source-pdos = + <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc_hs: endpoint { + remote-endpoint = + <&u2phy0_typec_hs>; + }; + }; + + port@1 { + reg = <1>; + + usbc_ss: endpoint { + remote-endpoint = + <&tcphy0_typec_ss>; + }; + }; + + port@2 { + reg = <2>; + + usbc_dp: endpoint { + remote-endpoint = + <&tcphy0_typec_dp>; + }; + }; + }; + }; + }; +}; + +&i2s1 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>; + rockchip,capture-channels = <8>; + rockchip,playback-channels = <8>; + status = "okay"; +}; + +&io_domains { + audio-supply = <&vcc_3v0>; + gpio1830-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + bus-scan-delay-ms = <1000>; + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; + max-link-speed = <2>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + vpcie0v9-supply = <&vcca0v9_s3>; + vpcie1v8-supply = <&vcca1v8_s3>; + vpcie3v3-supply = <&vcc3v3_ssd>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwrbtn_gpio: pwrbtn-gpio { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + lidbtn_gpio: lidbtn-gpio { + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + dc-charger { + dc_det_gpio: dc-det-gpio { + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + es8316 { + hp_det_gpio: hp-det-gpio { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + fusb302x { + fusb0_int_gpio: fusb0-int-gpio { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + i2s1 { + i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio { + rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; + }; + }; + + lcd-panel { + lcdvcc_en_gpio: lcdvcc-en-gpio { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + panel_en_gpio: panel-en-gpio { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lcd_panel_reset_gpio: lcd-panel-reset-gpio { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + pwrled_gpio: pwrled_gpio { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + slpled_gpio: slpled_gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l_gpio: pmic-int-l-gpio { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdcard { + sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio { + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + }; + + sdio-pwrseq { + wifi_enable_h_gpio: wifi-enable-h-gpio { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + pwr_5v_gpio: pwr-5v-gpio { + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_host_en_gpio: vcc5v0-host-en-gpio { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wireless-bluetooth { + bt_wake_gpio: bt-wake-gpio { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_gpio: bt-host-wake-gpio { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reset_gpio: bt-reset-gpio { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v0_sd>; + vqmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&spi1 { + max-freq = <10000000>; + status = "okay"; + + spiflash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <10000000>; + }; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy0_dp { + port { + tcphy0_typec_dp: endpoint { + remote-endpoint = <&usbc_dp>; + }; + }; +}; + +&tcphy0_usb3 { + port { + tcphy0_typec_ss: endpoint { + remote-endpoint = <&usbc_ss>; + }; + }; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_otg>; + status = "okay"; + }; + + port { + u2phy0_typec_hs: endpoint { + remote-endpoint = <&usbc_hs>; + }; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_otg>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + vbat-supply = <&wifi_bat>; + vddio-supply = <&vcc_wl>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/sys/gnu/dts/arm64/rockchip/rk3399-puma.dtsi b/sys/gnu/dts/arm64/rockchip/rk3399-puma.dtsi index c1edca3872c7..07694b196fdb 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3399-puma.dtsi +++ b/sys/gnu/dts/arm64/rockchip/rk3399-puma.dtsi @@ -480,7 +480,7 @@ }; &sdmmc { - vqmmc = <&vcc_sd>; + vqmmc-supply = <&vcc_sd>; }; &spi1 { diff --git a/sys/gnu/dts/arm64/rockchip/rk3399-rock960.dtsi b/sys/gnu/dts/arm64/rockchip/rk3399-rock960.dtsi index b69f0f2cbd67..ba7c75c9f2a1 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3399-rock960.dtsi +++ b/sys/gnu/dts/arm64/rockchip/rk3399-rock960.dtsi @@ -542,7 +542,7 @@ cap-mmc-highspeed; cap-sd-highspeed; clock-frequency = <100000000>; - clock-freq-min-max = <100000 100000000>; + max-frequency = <100000000>; cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; disable-wp; sd-uhs-sdr104; diff --git a/sys/gnu/dts/arm64/rockchip/rk3399-sapphire-excavator.dts b/sys/gnu/dts/arm64/rockchip/rk3399-sapphire-excavator.dts index b4d8f60b7e44..73e269a8ae0c 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3399-sapphire-excavator.dts +++ b/sys/gnu/dts/arm64/rockchip/rk3399-sapphire-excavator.dts @@ -230,7 +230,5 @@ }; &spdif { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; status = "okay"; }; diff --git a/sys/gnu/dts/arm64/rockchip/rk3399.dtsi b/sys/gnu/dts/arm64/rockchip/rk3399.dtsi index 33cc21fcf4c1..1448f358ed0a 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3399.dtsi +++ b/sys/gnu/dts/arm64/rockchip/rk3399.dtsi @@ -197,7 +197,7 @@ #clock-cells = <0>; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -288,6 +288,7 @@ resets = <&cru SRST_A_GMAC>; reset-names = "stmmaceth"; rockchip,grf = <&grf>; + snps,txpbl = <0x4>; status = "disabled"; }; @@ -349,8 +350,6 @@ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, <&u2phy0>; - clock-names = "usbhost", "arbiter", - "utmi"; phys = <&u2phy0_host>; phy-names = "usb"; status = "disabled"; @@ -362,8 +361,6 @@ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, <&u2phy0>; - clock-names = "usbhost", "arbiter", - "utmi"; phys = <&u2phy0_host>; phy-names = "usb"; status = "disabled"; @@ -375,8 +372,6 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, <&u2phy1>; - clock-names = "usbhost", "arbiter", - "utmi"; phys = <&u2phy1_host>; phy-names = "usb"; status = "disabled"; @@ -388,8 +383,6 @@ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, <&u2phy1>; - clock-names = "usbhost", "arbiter", - "utmi"; phys = <&u2phy1_host>; phy-names = "usb"; status = "disabled"; @@ -410,7 +403,7 @@ reset-names = "usb3-otg"; status = "disabled"; - usbdrd_dwc3_0: dwc3 { + usbdrd_dwc3_0: usb@fe800000 { compatible = "snps,dwc3"; reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; @@ -446,7 +439,7 @@ reset-names = "usb3-otg"; status = "disabled"; - usbdrd_dwc3_1: dwc3 { + usbdrd_dwc3_1: usb@fe900000 { compatible = "snps,dwc3"; reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; @@ -1131,8 +1124,6 @@ pmugrf: syscon@ff320000 { compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xff320000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; pmu_io_domains: io-domains { compatible = "rockchip,rk3399-pmu-io-voltage-domain"; @@ -1890,10 +1881,10 @@ gpu: gpu@ff9a0000 { compatible = "rockchip,rk3399-mali", "arm,mali-t860"; reg = <0x0 0xff9a0000 0x0 0x10000>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "gpu", "job", "mmu"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; clocks = <&cru ACLK_GPU>; #cooling-cells = <2>; power-domains = <&power RK3399_PD_GPU>; diff --git a/sys/gnu/dts/arm64/rockchip/rk3399pro-rock-pi-n10.dts b/sys/gnu/dts/arm64/rockchip/rk3399pro-rock-pi-n10.dts index b42f94179538..a1783e7f769a 100644 --- a/sys/gnu/dts/arm64/rockchip/rk3399pro-rock-pi-n10.dts +++ b/sys/gnu/dts/arm64/rockchip/rk3399pro-rock-pi-n10.dts @@ -13,5 +13,6 @@ / { model = "Radxa ROCK Pi N10"; - compatible = "radxa,rockpi-n10", "rockchip,rk3399pro"; + compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som", + "rockchip,rk3399pro"; }; diff --git a/sys/gnu/dts/arm64/socionext/uniphier-ld11.dtsi b/sys/gnu/dts/arm64/socionext/uniphier-ld11.dtsi index 5b18bda9c5a6..2ca2d3dc8d6c 100644 --- a/sys/gnu/dts/arm64/socionext/uniphier-ld11.dtsi +++ b/sys/gnu/dts/arm64/socionext/uniphier-ld11.dtsi @@ -143,8 +143,8 @@ interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 12>; + resets = <&peri_rst 12>; }; serial0: serial@54006800 { @@ -433,7 +433,7 @@ }; }; - emmc: sdhc@5a000000 { + emmc: mmc@5a000000 { compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; reg = <0x5a000000 0x400>; interrupts = <0 78 4>; @@ -566,7 +566,7 @@ }; }; - aidet: aidet@5fc20000 { + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-ld11-aidet"; reg = <0x5fc20000 0x200>; interrupt-controller; @@ -621,7 +621,7 @@ }; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/sys/gnu/dts/arm64/socionext/uniphier-ld20.dtsi b/sys/gnu/dts/arm64/socionext/uniphier-ld20.dtsi index f2dc5f695020..a93148c2088f 100644 --- a/sys/gnu/dts/arm64/socionext/uniphier-ld20.dtsi +++ b/sys/gnu/dts/arm64/socionext/uniphier-ld20.dtsi @@ -248,8 +248,8 @@ interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 12>; + resets = <&peri_rst 12>; }; spi2: spi@54006200 { @@ -259,8 +259,8 @@ interrupts = <0 229 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 13>; + resets = <&peri_rst 13>; }; spi3: spi@54006300 { @@ -270,8 +270,8 @@ interrupts = <0 230 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi3>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 14>; + resets = <&peri_rst 14>; }; serial0: serial@54006800 { @@ -559,7 +559,7 @@ }; }; - emmc: sdhc@5a000000 { + emmc: mmc@5a000000 { compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; reg = <0x5a000000 0x400>; interrupts = <0 78 4>; @@ -578,7 +578,7 @@ cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a400000 0x800>; @@ -664,7 +664,7 @@ }; }; - aidet: aidet@5fc20000 { + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-ld20-aidet"; reg = <0x5fc20000 0x200>; interrupt-controller; @@ -925,7 +925,7 @@ socionext,syscon = <&soc_glue>; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/sys/gnu/dts/arm64/socionext/uniphier-pxs3-ref.dts b/sys/gnu/dts/arm64/socionext/uniphier-pxs3-ref.dts index 754315bbd1c8..4d00ff9548e1 100644 --- a/sys/gnu/dts/arm64/socionext/uniphier-pxs3-ref.dts +++ b/sys/gnu/dts/arm64/socionext/uniphier-pxs3-ref.dts @@ -27,6 +27,8 @@ i2c2 = &i2c2; i2c3 = &i2c3; i2c6 = &i2c6; + spi0 = &spi0; + spi1 = &spi1; }; memory@80000000 { @@ -39,6 +41,14 @@ interrupts = <4 8>; }; +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + &serial0 { status = "okay"; }; diff --git a/sys/gnu/dts/arm64/socionext/uniphier-pxs3.dtsi b/sys/gnu/dts/arm64/socionext/uniphier-pxs3.dtsi index 73e7e1203b09..616835b38106 100644 --- a/sys/gnu/dts/arm64/socionext/uniphier-pxs3.dtsi +++ b/sys/gnu/dts/arm64/socionext/uniphier-pxs3.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "socionext,uniphier-pxs3"; @@ -42,6 +43,7 @@ clocks = <&sys_clk 33>; enable-method = "psci"; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -51,6 +53,7 @@ clocks = <&sys_clk 33>; enable-method = "psci"; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -60,6 +63,7 @@ clocks = <&sys_clk 33>; enable-method = "psci"; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -69,6 +73,7 @@ clocks = <&sys_clk 33>; enable-method = "psci"; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; }; @@ -136,6 +141,37 @@ <1 10 4>; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; /* 250ms */ + polling-delay = <1000>; /* 1000ms */ + thermal-sensors = <&pvtctl>; + + trips { + cpu_crit: cpu-crit { + temperature = <110000>; /* 110C */ + hysteresis = <2000>; + type = "critical"; + }; + cpu_alert: cpu-alert { + temperature = <100000>; /* 100C */ + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -171,8 +207,8 @@ interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 12>; + resets = <&peri_rst 12>; }; serial0: serial@54006800 { @@ -353,7 +389,7 @@ }; }; - emmc: sdhc@5a000000 { + emmc: mmc@5a000000 { compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; reg = <0x5a000000 0x400>; interrupts = <0 78 4>; @@ -372,7 +408,7 @@ cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a400000 0x800>; @@ -462,7 +498,7 @@ }; }; - aidet: aidet@5fc20000 { + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pxs3-aidet"; reg = <0x5fc20000 0x200>; interrupt-controller; @@ -496,6 +532,13 @@ watchdog { compatible = "socionext,uniphier-wdt"; }; + + pvtctl: pvtctl { + compatible = "socionext,uniphier-pxs3-thermal"; + interrupts = <0 3 4>; + #thermal-sensor-cells = <0>; + socionext,tmod-calibration = <0x0f22 0x68ee>; + }; }; eth0: ethernet@65000000 { @@ -783,7 +826,7 @@ socionext,syscon = <&soc_glue>; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/sys/gnu/dts/arm64/ti/k3-am65-main.dtsi b/sys/gnu/dts/arm64/ti/k3-am65-main.dtsi index e5df20a2d2f9..11887c72f23a 100644 --- a/sys/gnu/dts/arm64/ti/k3-am65-main.dtsi +++ b/sys/gnu/dts/arm64/ti/k3-am65-main.dtsi @@ -189,6 +189,8 @@ power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; + dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>; + dma-names = "tx0", "rx0"; }; main_spi1: spi@2110000 { @@ -296,6 +298,7 @@ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; dma-coherent; power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 151 2>, <&k3_clks 151 7>; assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>; assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ <&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */ @@ -335,6 +338,7 @@ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; dma-coherent; power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 152 2>; assigned-clocks = <&k3_clks 152 2>; assigned-clock-parents = <&k3_clks 152 4>; /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ diff --git a/sys/gnu/dts/arm64/ti/k3-am65-mcu.dtsi b/sys/gnu/dts/arm64/ti/k3-am65-mcu.dtsi index 92629cbdc184..353d1e2532a7 100644 --- a/sys/gnu/dts/arm64/ti/k3-am65-mcu.dtsi +++ b/sys/gnu/dts/arm64/ti/k3-am65-mcu.dtsi @@ -12,6 +12,12 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x40f00000 0x20000>; + + phy_gmii_sel: phy@4040 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4040 0x4>; + #phy-cells = <1>; + }; }; mcu_uart0: serial@40a00000 { @@ -82,6 +88,9 @@ assigned-clocks = <&k3_clks 0 2>; assigned-clock-rates = <60000000>; clock-names = "adc_tsc_fck"; + dmas = <&mcu_udmap 0x7100>, + <&mcu_udmap 0x7101 >; + dma-names = "fifo0", "fifo1"; adc { #io-channel-cells = <1>; @@ -97,6 +106,9 @@ assigned-clocks = <&k3_clks 1 2>; assigned-clock-rates = <60000000>; clock-names = "adc_tsc_fck"; + dmas = <&mcu_udmap 0x7102>, + <&mcu_udmap 0x7103>; + dma-names = "fifo0", "fifo1"; adc { #io-channel-cells = <1>; @@ -187,4 +199,53 @@ #size-cells = <0>; }; }; + + mcu_cpsw: ethernet@46000000 { + compatible = "ti,am654-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x46000000 0x0 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>; + dma-coherent; + clocks = <&k3_clks 5 10>; + clock-names = "fck"; + power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&mcu_udmap 0xf000>, + <&mcu_udmap 0xf001>, + <&mcu_udmap 0xf002>, + <&mcu_udmap 0xf003>, + <&mcu_udmap 0xf004>, + <&mcu_udmap 0xf005>, + <&mcu_udmap 0xf006>, + <&mcu_udmap 0xf007>, + <&mcu_udmap 0x7000>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + ti,syscon-efuse = <&mcu_conf 0x200>; + phys = <&phy_gmii_sel 1>; + }; + }; + + davinci_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x0 0xf00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 5 10>; + clock-names = "fck"; + bus_freq = <1000000>; + }; + }; }; diff --git a/sys/gnu/dts/arm64/ti/k3-am65.dtsi b/sys/gnu/dts/arm64/ti/k3-am65.dtsi index aea36e29dd32..5be75e430965 100644 --- a/sys/gnu/dts/arm64/ti/k3-am65.dtsi +++ b/sys/gnu/dts/arm64/ti/k3-am65.dtsi @@ -30,6 +30,7 @@ i2c3 = &main_i2c1; i2c4 = &main_i2c2; i2c5 = &main_i2c3; + ethernet0 = &cpsw_port1; }; chosen { }; diff --git a/sys/gnu/dts/arm64/ti/k3-am654-base-board.dts b/sys/gnu/dts/arm64/ti/k3-am654-base-board.dts index 1700996800eb..2f3d3316a1cf 100644 --- a/sys/gnu/dts/arm64/ti/k3-am654-base-board.dts +++ b/sys/gnu/dts/arm64/ti/k3-am654-base-board.dts @@ -7,6 +7,7 @@ #include "k3-am654.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/net/ti-dp83867.h> / { compatible = "ti,am654-evm", "ti,am654"; @@ -95,7 +96,30 @@ wkup_pca554_default: wkup_pca554_default { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ + >; + }; + + mcu_cpsw_pins_default: mcu_cpsw_pins_default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */ + AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */ + AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */ + AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */ + AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */ + AM65X_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */ + AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */ + AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */ + AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */ + >; + }; + mcu_mdio_pins_default: mcu_mdio1_pins_default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ + AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ >; }; }; @@ -419,3 +443,21 @@ data-lanes = <1 2>; }; }; + +&mcu_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; +}; diff --git a/sys/gnu/dts/arm64/ti/k3-j721e-common-proc-board.dts b/sys/gnu/dts/arm64/ti/k3-j721e-common-proc-board.dts index 7a5c3d4adadd..98e5e17e3ff7 100644 --- a/sys/gnu/dts/arm64/ti/k3-j721e-common-proc-board.dts +++ b/sys/gnu/dts/arm64/ti/k3-j721e-common-proc-board.dts @@ -8,6 +8,7 @@ #include "k3-j721e-som-p0.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/net/ti-dp83867.h> / { chosen { @@ -128,6 +129,30 @@ J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */ >; }; + + mcu_cpsw_pins_default: mcu_cpsw_pins_default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ + J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */ + J721E_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */ + J721E_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */ + J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */ + J721E_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */ + J721E_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */ + J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ + J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ + J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ + J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* MCU_RGMII1_TXC */ + J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ + >; + }; + + mcu_mdio_pins_default: mcu_mdio1_pins_default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */ + J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */ + >; + }; }; &wkup_uart0 { @@ -429,3 +454,21 @@ #gpio-cells = <2>; }; }; + +&mcu_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; +}; diff --git a/sys/gnu/dts/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/sys/gnu/dts/arm64/ti/k3-j721e-mcu-wakeup.dtsi index 16c874bfd49a..3d6064125b40 100644 --- a/sys/gnu/dts/arm64/ti/k3-j721e-mcu-wakeup.dtsi +++ b/sys/gnu/dts/arm64/ti/k3-j721e-mcu-wakeup.dtsi @@ -34,6 +34,20 @@ }; }; + mcu_conf: syscon@40f00000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x40f00000 0x0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40f00000 0x20000>; + + phy_gmii_sel: phy@4040 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4040 0x4>; + #phy-cells = <1>; + }; + }; + wkup_pmx0: pinmux@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ @@ -203,6 +217,9 @@ assigned-clocks = <&k3_clks 0 3>; assigned-clock-rates = <60000000>; clock-names = "adc_tsc_fck"; + dmas = <&main_udmap 0x7400>, + <&main_udmap 0x7401>; + dma-names = "fifo0", "fifo1"; adc { #io-channel-cells = <1>; @@ -219,6 +236,9 @@ assigned-clocks = <&k3_clks 1 3>; assigned-clock-rates = <60000000>; clock-names = "adc_tsc_fck"; + dmas = <&main_udmap 0x7402>, + <&main_udmap 0x7403>; + dma-names = "fifo0", "fifo1"; adc { #io-channel-cells = <1>; @@ -270,4 +290,53 @@ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ }; }; + + mcu_cpsw: ethernet@46000000 { + compatible = "ti,j721e-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x46000000 0x0 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>; + dma-coherent; + clocks = <&k3_clks 18 22>; + clock-names = "fck"; + power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&mcu_udmap 0xf000>, + <&mcu_udmap 0xf001>, + <&mcu_udmap 0xf002>, + <&mcu_udmap 0xf003>, + <&mcu_udmap 0xf004>, + <&mcu_udmap 0xf005>, + <&mcu_udmap 0xf006>, + <&mcu_udmap 0xf007>, + <&mcu_udmap 0x7000>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + ti,syscon-efuse = <&mcu_conf 0x200>; + phys = <&phy_gmii_sel 1>; + }; + }; + + davinci_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x0 0xf00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 18 22>; + clock-names = "fck"; + bus_freq = <1000000>; + }; + }; }; diff --git a/sys/gnu/dts/arm64/ti/k3-j721e.dtsi b/sys/gnu/dts/arm64/ti/k3-j721e.dtsi index 027bd1febafa..2f9a56d9b114 100644 --- a/sys/gnu/dts/arm64/ti/k3-j721e.dtsi +++ b/sys/gnu/dts/arm64/ti/k3-j721e.dtsi @@ -30,6 +30,7 @@ serial9 = &main_uart7; serial10 = &main_uart8; serial11 = &main_uart9; + ethernet0 = &cpsw_port1; }; chosen { }; diff --git a/sys/gnu/dts/include/dt-bindings/arm/coresight-cti-dt.h b/sys/gnu/dts/include/dt-bindings/arm/coresight-cti-dt.h new file mode 100644 index 000000000000..61e7bdf8ea6e --- /dev/null +++ b/sys/gnu/dts/include/dt-bindings/arm/coresight-cti-dt.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for the defined trigger signal + * types on CoreSight CTI. + */ + +#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H +#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H + +#define GEN_IO 0 +#define GEN_INTREQ 1 +#define GEN_INTACK 2 +#define GEN_HALTREQ 3 +#define GEN_RESTARTREQ 4 +#define PE_EDBGREQ 5 +#define PE_DBGRESTART 6 +#define PE_CTIIRQ 7 +#define PE_PMUIRQ 8 +#define PE_DBGTRIGGER 9 +#define ETM_EXTOUT 10 +#define ETM_EXTIN 11 +#define SNK_FULL 12 +#define SNK_ACQCOMP 13 +#define SNK_FLUSHCOMP 14 +#define SNK_FLUSHIN 15 +#define SNK_TRIGIN 16 +#define STM_ASYNCOUT 17 +#define STM_TOUT_SPTE 18 +#define STM_TOUT_SW 19 +#define STM_TOUT_HETE 20 +#define STM_HWEVENT 21 +#define ELA_TSTART 22 +#define ELA_TSTOP 23 +#define ELA_DBGREQ 24 +#define CTI_TRIG_MAX 25 + +#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */ diff --git a/sys/gnu/dts/include/dt-bindings/bus/ti-sysc.h b/sys/gnu/dts/include/dt-bindings/bus/ti-sysc.h index babd08a1d226..76b07826ed05 100644 --- a/sys/gnu/dts/include/dt-bindings/bus/ti-sysc.h +++ b/sys/gnu/dts/include/dt-bindings/bus/ti-sysc.h @@ -18,6 +18,10 @@ #define SYSC_DRA7_MCAN_ENAWAKEUP (1 << 4) +/* PRUSS sysc found on AM33xx/AM43xx/AM57xx */ +#define SYSC_PRUSS_SUB_MWAIT (1 << 5) +#define SYSC_PRUSS_STANDBY_INIT (1 << 4) + /* SYSCONFIG STANDBYMODE/MIDLEMODE/SIDLEMODE supported by hardware */ #define SYSC_IDLE_FORCE 0 #define SYSC_IDLE_NO 1 diff --git a/sys/gnu/dts/include/dt-bindings/clock/dm814.h b/sys/gnu/dts/include/dt-bindings/clock/dm814.h index f0f04e0a249e..33b8826d936b 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/dm814.h +++ b/sys/gnu/dts/include/dt-bindings/clock/dm814.h @@ -34,4 +34,9 @@ #define DM814_MMC2_CLKCTRL DM814_CLKCTRL_INDEX(0x220) #define DM814_MMC3_CLKCTRL DM814_CLKCTRL_INDEX(0x224) +/* alwon_ethernet clocks */ +#define DM814_ETHERNET_CLKCTRL_OFFSET 0x1d4 +#define DM814_ETHERNET_CLKCTRL_INDEX(offset) ((offset) - DM814_ETHERNET_CLKCTRL_OFFSET) +#define DM814_ETHERNET_CPGMAC0_CLKCTRL DM814_ETHERNET_CLKCTRL_INDEX(0x1d4) + #endif diff --git a/sys/gnu/dts/include/dt-bindings/clock/g12a-clkc.h b/sys/gnu/dts/include/dt-bindings/clock/g12a-clkc.h index 0837c1a7ae49..b0d65d73db96 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/g12a-clkc.h +++ b/sys/gnu/dts/include/dt-bindings/clock/g12a-clkc.h @@ -143,5 +143,7 @@ #define CLKID_CPU1_CLK 253 #define CLKID_CPU2_CLK 254 #define CLKID_CPU3_CLK 255 +#define CLKID_SPICC0_SCLK 258 +#define CLKID_SPICC1_SCLK 261 #endif /* __G12A_CLKC_H */ diff --git a/sys/gnu/dts/include/dt-bindings/clock/gxbb-clkc.h b/sys/gnu/dts/include/dt-bindings/clock/gxbb-clkc.h index db0763e96173..4073eb7a9da1 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/gxbb-clkc.h +++ b/sys/gnu/dts/include/dt-bindings/clock/gxbb-clkc.h @@ -146,5 +146,6 @@ #define CLKID_CTS_VDAC 201 #define CLKID_HDMI_TX 202 #define CLKID_HDMI 205 +#define CLKID_ACODEC 206 #endif /* __GXBB_CLKC_H */ diff --git a/sys/gnu/dts/include/dt-bindings/clock/imx7d-clock.h b/sys/gnu/dts/include/dt-bindings/clock/imx7d-clock.h index e6a670e1a3f8..1d4c0dfe0202 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/imx7d-clock.h +++ b/sys/gnu/dts/include/dt-bindings/clock/imx7d-clock.h @@ -451,5 +451,6 @@ #define IMX7D_SNVS_CLK 442 #define IMX7D_CAAM_CLK 443 #define IMX7D_KPP_ROOT_CLK 444 -#define IMX7D_CLK_END 445 +#define IMX7D_PXP_CLK 445 +#define IMX7D_CLK_END 446 #endif /* __DT_BINDINGS_CLOCK_IMX7D_H */ diff --git a/sys/gnu/dts/include/dt-bindings/clock/imx8mm-clock.h b/sys/gnu/dts/include/dt-bindings/clock/imx8mm-clock.h index edeece2289f0..e63a5530aed7 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/imx8mm-clock.h +++ b/sys/gnu/dts/include/dt-bindings/clock/imx8mm-clock.h @@ -265,6 +265,15 @@ #define IMX8MM_SYS_PLL2_333M_CG 244 #define IMX8MM_SYS_PLL2_500M_CG 245 -#define IMX8MM_CLK_END 246 +#define IMX8MM_CLK_M4_CORE 246 +#define IMX8MM_CLK_VPU_CORE 247 +#define IMX8MM_CLK_GPU3D_CORE 248 +#define IMX8MM_CLK_GPU2D_CORE 249 + +#define IMX8MM_CLK_CLKO2 250 + +#define IMX8MM_CLK_A53_CORE 251 + +#define IMX8MM_CLK_END 252 #endif diff --git a/sys/gnu/dts/include/dt-bindings/clock/imx8mn-clock.h b/sys/gnu/dts/include/dt-bindings/clock/imx8mn-clock.h index 65ac6eb6c733..621ea0e87c67 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/imx8mn-clock.h +++ b/sys/gnu/dts/include/dt-bindings/clock/imx8mn-clock.h @@ -228,6 +228,12 @@ #define IMX8MN_SYS_PLL2_333M_CG 209 #define IMX8MN_SYS_PLL2_500M_CG 210 -#define IMX8MN_CLK_END 211 +#define IMX8MN_CLK_SNVS_ROOT 211 +#define IMX8MN_CLK_GPU_CORE 212 +#define IMX8MN_CLK_GPU_SHADER 213 + +#define IMX8MN_CLK_A53_CORE 214 + +#define IMX8MN_CLK_END 215 #endif diff --git a/sys/gnu/dts/include/dt-bindings/clock/imx8mp-clock.h b/sys/gnu/dts/include/dt-bindings/clock/imx8mp-clock.h index 2fab63186bca..47ab082238b4 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/imx8mp-clock.h +++ b/sys/gnu/dts/include/dt-bindings/clock/imx8mp-clock.h @@ -173,7 +173,7 @@ #define IMX8MP_CLK_IPP_DO_CLKO1 164 #define IMX8MP_CLK_IPP_DO_CLKO2 165 #define IMX8MP_CLK_HDMI_FDCC_TST 166 -#define IMX8MP_CLK_HDMI_27M 167 +#define IMX8MP_CLK_HDMI_24M 167 #define IMX8MP_CLK_HDMI_REF_266M 168 #define IMX8MP_CLK_USDHC3 169 #define IMX8MP_CLK_MEDIA_CAM1_PIX 170 @@ -294,7 +294,8 @@ #define IMX8MP_CLK_DRAM_ALT_ROOT 285 #define IMX8MP_CLK_DRAM_CORE 286 #define IMX8MP_CLK_ARM 287 +#define IMX8MP_CLK_A53_CORE 288 -#define IMX8MP_CLK_END 288 +#define IMX8MP_CLK_END 289 #endif diff --git a/sys/gnu/dts/include/dt-bindings/clock/imx8mq-clock.h b/sys/gnu/dts/include/dt-bindings/clock/imx8mq-clock.h index 3bab9b21c8d7..9b8045d75b8b 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/imx8mq-clock.h +++ b/sys/gnu/dts/include/dt-bindings/clock/imx8mq-clock.h @@ -424,6 +424,13 @@ #define IMX8MQ_SYS2_PLL_500M_CG 283 #define IMX8MQ_SYS2_PLL_1000M_CG 284 -#define IMX8MQ_CLK_END 285 +#define IMX8MQ_CLK_GPU_CORE 285 +#define IMX8MQ_CLK_GPU_SHADER 286 +#define IMX8MQ_CLK_M4_CORE 287 +#define IMX8MQ_CLK_VPU_CORE 288 + +#define IMX8MQ_CLK_A53_CORE 289 + +#define IMX8MQ_CLK_END 290 #endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */ diff --git a/sys/gnu/dts/include/dt-bindings/clock/k210-clk.h b/sys/gnu/dts/include/dt-bindings/clock/k210-clk.h new file mode 100644 index 000000000000..5a2fd64d1a49 --- /dev/null +++ b/sys/gnu/dts/include/dt-bindings/clock/k210-clk.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com> + * Copyright (c) 2020 Western Digital Corporation or its affiliates. + */ +#ifndef K210_CLK_H +#define K210_CLK_H + +/* + * Arbitrary identifiers for clocks. + * The structure is: in0 -> pll0 -> aclk -> cpu + * + * Since we use the hardware defaults for now, set all these to the same clock. + */ +#define K210_CLK_PLL0 0 +#define K210_CLK_PLL1 0 +#define K210_CLK_ACLK 0 +#define K210_CLK_CPU 0 + +#endif /* K210_CLK_H */ diff --git a/sys/gnu/dts/include/dt-bindings/clock/marvell,mmp2.h b/sys/gnu/dts/include/dt-bindings/clock/marvell,mmp2.h index 4b1a7724f20d..06bb7fe4c62f 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/marvell,mmp2.h +++ b/sys/gnu/dts/include/dt-bindings/clock/marvell,mmp2.h @@ -26,6 +26,9 @@ #define MMP2_CLK_VCTCXO_4 25 #define MMP2_CLK_UART_PLL 26 #define MMP2_CLK_USB_PLL 27 +#define MMP3_CLK_PLL1_P 28 +#define MMP3_CLK_PLL2_P 29 +#define MMP3_CLK_PLL3 30 /* apb periphrals */ #define MMP2_CLK_TWSI0 60 @@ -50,6 +53,10 @@ #define MMP2_CLK_SSP2 79 #define MMP2_CLK_SSP3 80 #define MMP2_CLK_TIMER 81 +#define MMP2_CLK_THERMAL0 82 +#define MMP3_CLK_THERMAL1 83 +#define MMP3_CLK_THERMAL2 84 +#define MMP3_CLK_THERMAL3 85 /* axi periphrals */ #define MMP2_CLK_SDH0 101 @@ -74,6 +81,12 @@ #define MMP2_CLK_DISP0_LCDC 120 #define MMP2_CLK_USBHSIC0 121 #define MMP2_CLK_USBHSIC1 122 +#define MMP2_CLK_GPU_BUS 123 +#define MMP3_CLK_GPU_BUS MMP2_CLK_GPU_BUS +#define MMP2_CLK_GPU_3D 124 +#define MMP3_CLK_GPU_3D MMP2_CLK_GPU_3D +#define MMP3_CLK_GPU_2D 125 +#define MMP3_CLK_SDH4 126 #define MMP2_NR_CLKS 200 #endif diff --git a/sys/gnu/dts/include/dt-bindings/clock/qcom,gcc-sc7180.h b/sys/gnu/dts/include/dt-bindings/clock/qcom,gcc-sc7180.h index e8029b2e92d7..1258fd05db68 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/qcom,gcc-sc7180.h +++ b/sys/gnu/dts/include/dt-bindings/clock/qcom,gcc-sc7180.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * Copyright (c) 2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. */ #ifndef _DT_BINDINGS_CLK_QCOM_GCC_SC7180_H @@ -132,6 +132,11 @@ #define GCC_VIDEO_GPLL0_DIV_CLK_SRC 122 #define GCC_VIDEO_THROTTLE_AXI_CLK 123 #define GCC_VIDEO_XO_CLK 124 +#define GCC_MSS_CFG_AHB_CLK 125 +#define GCC_MSS_MFAB_AXIS_CLK 126 +#define GCC_MSS_NAV_AXI_CLK 127 +#define GCC_MSS_Q6_MEMNOC_AXI_CLK 128 +#define GCC_MSS_SNOC_AXI_CLK 129 /* GCC resets */ #define GCC_QUSB2PHY_PRIM_BCR 0 diff --git a/sys/gnu/dts/include/dt-bindings/clock/qcom,gcc-sm8150.h b/sys/gnu/dts/include/dt-bindings/clock/qcom,gcc-sm8150.h index 90d60ef94c64..3e1a91876610 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/qcom,gcc-sm8150.h +++ b/sys/gnu/dts/include/dt-bindings/clock/qcom,gcc-sm8150.h @@ -240,4 +240,8 @@ #define GCC_USB30_SEC_BCR 27 #define GCC_USB_PHY_CFG_AHB2PHY_BCR 28 +/* GCC GDSCRs */ +#define USB30_PRIM_GDSC 4 +#define USB30_SEC_GDSC 5 + #endif diff --git a/sys/gnu/dts/include/dt-bindings/clock/qcom,gcc-sm8250.h b/sys/gnu/dts/include/dt-bindings/clock/qcom,gcc-sm8250.h new file mode 100644 index 000000000000..7b7abe327e37 --- /dev/null +++ b/sys/gnu/dts/include/dt-bindings/clock/qcom,gcc-sm8250.h @@ -0,0 +1,271 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8250_H +#define _DT_BINDINGS_CLK_QCOM_GCC_SM8250_H + +/* GCC clocks */ +#define GPLL0 0 +#define GPLL0_OUT_EVEN 1 +#define GPLL4 2 +#define GPLL9 3 +#define GCC_AGGRE_NOC_PCIE_TBU_CLK 4 +#define GCC_AGGRE_UFS_CARD_AXI_CLK 5 +#define GCC_AGGRE_UFS_PHY_AXI_CLK 6 +#define GCC_AGGRE_USB3_PRIM_AXI_CLK 7 +#define GCC_AGGRE_USB3_SEC_AXI_CLK 8 +#define GCC_BOOT_ROM_AHB_CLK 9 +#define GCC_CAMERA_AHB_CLK 10 +#define GCC_CAMERA_HF_AXI_CLK 11 +#define GCC_CAMERA_SF_AXI_CLK 12 +#define GCC_CAMERA_XO_CLK 13 +#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 14 +#define GCC_CFG_NOC_USB3_SEC_AXI_CLK 15 +#define GCC_CPUSS_AHB_CLK 16 +#define GCC_CPUSS_AHB_CLK_SRC 17 +#define GCC_CPUSS_AHB_POSTDIV_CLK_SRC 18 +#define GCC_CPUSS_DVM_BUS_CLK 19 +#define GCC_CPUSS_RBCPR_CLK 20 +#define GCC_DDRSS_GPU_AXI_CLK 21 +#define GCC_DDRSS_PCIE_SF_TBU_CLK 22 +#define GCC_DISP_AHB_CLK 23 +#define GCC_DISP_HF_AXI_CLK 24 +#define GCC_DISP_SF_AXI_CLK 25 +#define GCC_DISP_XO_CLK 26 +#define GCC_GP1_CLK 27 +#define GCC_GP1_CLK_SRC 28 +#define GCC_GP2_CLK 29 +#define GCC_GP2_CLK_SRC 30 +#define GCC_GP3_CLK 31 +#define GCC_GP3_CLK_SRC 32 +#define GCC_GPU_CFG_AHB_CLK 33 +#define GCC_GPU_GPLL0_CLK_SRC 34 +#define GCC_GPU_GPLL0_DIV_CLK_SRC 35 +#define GCC_GPU_IREF_EN 36 +#define GCC_GPU_MEMNOC_GFX_CLK 37 +#define GCC_GPU_SNOC_DVM_GFX_CLK 38 +#define GCC_NPU_AXI_CLK 39 +#define GCC_NPU_BWMON_AXI_CLK 40 +#define GCC_NPU_BWMON_CFG_AHB_CLK 41 +#define GCC_NPU_CFG_AHB_CLK 42 +#define GCC_NPU_DMA_CLK 43 +#define GCC_NPU_GPLL0_CLK_SRC 44 +#define GCC_NPU_GPLL0_DIV_CLK_SRC 45 +#define GCC_PCIE0_PHY_REFGEN_CLK 46 +#define GCC_PCIE1_PHY_REFGEN_CLK 47 +#define GCC_PCIE2_PHY_REFGEN_CLK 48 +#define GCC_PCIE_0_AUX_CLK 49 +#define GCC_PCIE_0_AUX_CLK_SRC 50 +#define GCC_PCIE_0_CFG_AHB_CLK 51 +#define GCC_PCIE_0_MSTR_AXI_CLK 52 +#define GCC_PCIE_0_PIPE_CLK 53 +#define GCC_PCIE_0_SLV_AXI_CLK 54 +#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 55 +#define GCC_PCIE_1_AUX_CLK 56 +#define GCC_PCIE_1_AUX_CLK_SRC 57 +#define GCC_PCIE_1_CFG_AHB_CLK 58 +#define GCC_PCIE_1_MSTR_AXI_CLK 59 +#define GCC_PCIE_1_PIPE_CLK 60 +#define GCC_PCIE_1_SLV_AXI_CLK 61 +#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 62 +#define GCC_PCIE_2_AUX_CLK 63 +#define GCC_PCIE_2_AUX_CLK_SRC 64 +#define GCC_PCIE_2_CFG_AHB_CLK 65 +#define GCC_PCIE_2_MSTR_AXI_CLK 66 +#define GCC_PCIE_2_PIPE_CLK 67 +#define GCC_PCIE_2_SLV_AXI_CLK 68 +#define GCC_PCIE_2_SLV_Q2A_AXI_CLK 69 +#define GCC_PCIE_MDM_CLKREF_EN 70 +#define GCC_PCIE_PHY_AUX_CLK 71 +#define GCC_PCIE_PHY_REFGEN_CLK_SRC 72 +#define GCC_PCIE_WIFI_CLKREF_EN 73 +#define GCC_PCIE_WIGIG_CLKREF_EN 74 +#define GCC_PDM2_CLK 75 +#define GCC_PDM2_CLK_SRC 76 +#define GCC_PDM_AHB_CLK 77 +#define GCC_PDM_XO4_CLK 78 +#define GCC_PRNG_AHB_CLK 79 +#define GCC_QMIP_CAMERA_NRT_AHB_CLK 80 +#define GCC_QMIP_CAMERA_RT_AHB_CLK 81 +#define GCC_QMIP_DISP_AHB_CLK 82 +#define GCC_QMIP_VIDEO_CVP_AHB_CLK 83 +#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 84 +#define GCC_QUPV3_WRAP0_CORE_2X_CLK 85 +#define GCC_QUPV3_WRAP0_CORE_CLK 86 +#define GCC_QUPV3_WRAP0_S0_CLK 87 +#define GCC_QUPV3_WRAP0_S0_CLK_SRC 88 +#define GCC_QUPV3_WRAP0_S1_CLK 89 +#define GCC_QUPV3_WRAP0_S1_CLK_SRC 90 +#define GCC_QUPV3_WRAP0_S2_CLK 91 +#define GCC_QUPV3_WRAP0_S2_CLK_SRC 92 +#define GCC_QUPV3_WRAP0_S3_CLK 93 +#define GCC_QUPV3_WRAP0_S3_CLK_SRC 94 +#define GCC_QUPV3_WRAP0_S4_CLK 95 +#define GCC_QUPV3_WRAP0_S4_CLK_SRC 96 +#define GCC_QUPV3_WRAP0_S5_CLK 97 +#define GCC_QUPV3_WRAP0_S5_CLK_SRC 98 +#define GCC_QUPV3_WRAP0_S6_CLK 99 +#define GCC_QUPV3_WRAP0_S6_CLK_SRC 100 +#define GCC_QUPV3_WRAP0_S7_CLK 101 +#define GCC_QUPV3_WRAP0_S7_CLK_SRC 102 +#define GCC_QUPV3_WRAP1_CORE_2X_CLK 103 +#define GCC_QUPV3_WRAP1_CORE_CLK 104 +#define GCC_QUPV3_WRAP1_S0_CLK 105 +#define GCC_QUPV3_WRAP1_S0_CLK_SRC 106 +#define GCC_QUPV3_WRAP1_S1_CLK 107 +#define GCC_QUPV3_WRAP1_S1_CLK_SRC 108 +#define GCC_QUPV3_WRAP1_S2_CLK 109 +#define GCC_QUPV3_WRAP1_S2_CLK_SRC 110 +#define GCC_QUPV3_WRAP1_S3_CLK 111 +#define GCC_QUPV3_WRAP1_S3_CLK_SRC 112 +#define GCC_QUPV3_WRAP1_S4_CLK 113 +#define GCC_QUPV3_WRAP1_S4_CLK_SRC 114 +#define GCC_QUPV3_WRAP1_S5_CLK 115 +#define GCC_QUPV3_WRAP1_S5_CLK_SRC 116 +#define GCC_QUPV3_WRAP2_CORE_2X_CLK 117 +#define GCC_QUPV3_WRAP2_CORE_CLK 118 +#define GCC_QUPV3_WRAP2_S0_CLK 119 +#define GCC_QUPV3_WRAP2_S0_CLK_SRC 120 +#define GCC_QUPV3_WRAP2_S1_CLK 121 +#define GCC_QUPV3_WRAP2_S1_CLK_SRC 122 +#define GCC_QUPV3_WRAP2_S2_CLK 123 +#define GCC_QUPV3_WRAP2_S2_CLK_SRC 124 +#define GCC_QUPV3_WRAP2_S3_CLK 125 +#define GCC_QUPV3_WRAP2_S3_CLK_SRC 126 +#define GCC_QUPV3_WRAP2_S4_CLK 127 +#define GCC_QUPV3_WRAP2_S4_CLK_SRC 128 +#define GCC_QUPV3_WRAP2_S5_CLK 129 +#define GCC_QUPV3_WRAP2_S5_CLK_SRC 130 +#define GCC_QUPV3_WRAP_0_M_AHB_CLK 131 +#define GCC_QUPV3_WRAP_0_S_AHB_CLK 132 +#define GCC_QUPV3_WRAP_1_M_AHB_CLK 133 +#define GCC_QUPV3_WRAP_1_S_AHB_CLK 134 +#define GCC_QUPV3_WRAP_2_M_AHB_CLK 135 +#define GCC_QUPV3_WRAP_2_S_AHB_CLK 136 +#define GCC_SDCC2_AHB_CLK 137 +#define GCC_SDCC2_APPS_CLK 138 +#define GCC_SDCC2_APPS_CLK_SRC 139 +#define GCC_SDCC4_AHB_CLK 140 +#define GCC_SDCC4_APPS_CLK 141 +#define GCC_SDCC4_APPS_CLK_SRC 142 +#define GCC_SYS_NOC_CPUSS_AHB_CLK 143 +#define GCC_TSIF_AHB_CLK 144 +#define GCC_TSIF_INACTIVITY_TIMERS_CLK 145 +#define GCC_TSIF_REF_CLK 146 +#define GCC_TSIF_REF_CLK_SRC 147 +#define GCC_UFS_1X_CLKREF_EN 148 +#define GCC_UFS_CARD_AHB_CLK 149 +#define GCC_UFS_CARD_AXI_CLK 150 +#define GCC_UFS_CARD_AXI_CLK_SRC 151 +#define GCC_UFS_CARD_ICE_CORE_CLK 152 +#define GCC_UFS_CARD_ICE_CORE_CLK_SRC 153 +#define GCC_UFS_CARD_PHY_AUX_CLK 154 +#define GCC_UFS_CARD_PHY_AUX_CLK_SRC 155 +#define GCC_UFS_CARD_RX_SYMBOL_0_CLK 156 +#define GCC_UFS_CARD_RX_SYMBOL_1_CLK 157 +#define GCC_UFS_CARD_TX_SYMBOL_0_CLK 158 +#define GCC_UFS_CARD_UNIPRO_CORE_CLK 159 +#define GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC 160 +#define GCC_UFS_PHY_AHB_CLK 161 +#define GCC_UFS_PHY_AXI_CLK 162 +#define GCC_UFS_PHY_AXI_CLK_SRC 163 +#define GCC_UFS_PHY_ICE_CORE_CLK 164 +#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 165 +#define GCC_UFS_PHY_PHY_AUX_CLK 166 +#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 167 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 168 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 169 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 170 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK 171 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 172 +#define GCC_USB30_PRIM_MASTER_CLK 173 +#define GCC_USB30_PRIM_MASTER_CLK_SRC 174 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK 175 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 176 +#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC 177 +#define GCC_USB30_PRIM_SLEEP_CLK 178 +#define GCC_USB30_SEC_MASTER_CLK 179 +#define GCC_USB30_SEC_MASTER_CLK_SRC 180 +#define GCC_USB30_SEC_MOCK_UTMI_CLK 181 +#define GCC_USB30_SEC_MOCK_UTMI_CLK_SRC 182 +#define GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC 183 +#define GCC_USB30_SEC_SLEEP_CLK 184 +#define GCC_USB3_PRIM_PHY_AUX_CLK 185 +#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 186 +#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 187 +#define GCC_USB3_PRIM_PHY_PIPE_CLK 188 +#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC 189 +#define GCC_USB3_SEC_CLKREF_EN 190 +#define GCC_USB3_SEC_PHY_AUX_CLK 191 +#define GCC_USB3_SEC_PHY_AUX_CLK_SRC 192 +#define GCC_USB3_SEC_PHY_COM_AUX_CLK 193 +#define GCC_USB3_SEC_PHY_PIPE_CLK 194 +#define GCC_USB3_SEC_PHY_PIPE_CLK_SRC 195 +#define GCC_VIDEO_AHB_CLK 196 +#define GCC_VIDEO_AXI0_CLK 197 +#define GCC_VIDEO_AXI1_CLK 198 +#define GCC_VIDEO_XO_CLK 199 + +/* GCC resets */ +#define GCC_GPU_BCR 0 +#define GCC_MMSS_BCR 1 +#define GCC_NPU_BWMON_BCR 2 +#define GCC_NPU_BCR 3 +#define GCC_PCIE_0_BCR 4 +#define GCC_PCIE_0_LINK_DOWN_BCR 5 +#define GCC_PCIE_0_NOCSR_COM_PHY_BCR 6 +#define GCC_PCIE_0_PHY_BCR 7 +#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR 8 +#define GCC_PCIE_1_BCR 9 +#define GCC_PCIE_1_LINK_DOWN_BCR 10 +#define GCC_PCIE_1_NOCSR_COM_PHY_BCR 11 +#define GCC_PCIE_1_PHY_BCR 12 +#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR 13 +#define GCC_PCIE_2_BCR 14 +#define GCC_PCIE_2_LINK_DOWN_BCR 15 +#define GCC_PCIE_2_NOCSR_COM_PHY_BCR 16 +#define GCC_PCIE_2_PHY_BCR 17 +#define GCC_PCIE_2_PHY_NOCSR_COM_PHY_BCR 18 +#define GCC_PCIE_PHY_BCR 19 +#define GCC_PCIE_PHY_CFG_AHB_BCR 20 +#define GCC_PCIE_PHY_COM_BCR 21 +#define GCC_PDM_BCR 22 +#define GCC_PRNG_BCR 23 +#define GCC_QUPV3_WRAPPER_0_BCR 24 +#define GCC_QUPV3_WRAPPER_1_BCR 25 +#define GCC_QUPV3_WRAPPER_2_BCR 26 +#define GCC_QUSB2PHY_PRIM_BCR 27 +#define GCC_QUSB2PHY_SEC_BCR 28 +#define GCC_SDCC2_BCR 29 +#define GCC_SDCC4_BCR 30 +#define GCC_TSIF_BCR 31 +#define GCC_UFS_CARD_BCR 32 +#define GCC_UFS_PHY_BCR 33 +#define GCC_USB30_PRIM_BCR 34 +#define GCC_USB30_SEC_BCR 35 +#define GCC_USB3_DP_PHY_PRIM_BCR 36 +#define GCC_USB3_DP_PHY_SEC_BCR 37 +#define GCC_USB3_PHY_PRIM_BCR 38 +#define GCC_USB3_PHY_SEC_BCR 39 +#define GCC_USB3PHY_PHY_PRIM_BCR 40 +#define GCC_USB3PHY_PHY_SEC_BCR 41 +#define GCC_USB_PHY_CFG_AHB2PHY_BCR 42 +#define GCC_VIDEO_AXI0_CLK_ARES 43 +#define GCC_VIDEO_AXI1_CLK_ARES 44 + +/* GCC power domains */ +#define PCIE_0_GDSC 0 +#define PCIE_1_GDSC 1 +#define PCIE_2_GDSC 2 +#define UFS_CARD_GDSC 3 +#define UFS_PHY_GDSC 4 +#define USB30_PRIM_GDSC 5 +#define USB30_SEC_GDSC 6 +#define HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC 7 +#define HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC 8 +#define HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC 9 +#define HLOS1_VOTE_MMNOC_MMU_TBU_SF1_GDSC 10 + +#endif diff --git a/sys/gnu/dts/include/dt-bindings/clock/qcom,gpucc-sc7180.h b/sys/gnu/dts/include/dt-bindings/clock/qcom,gpucc-sc7180.h index 0e4643b08b49..65e706d7d9c6 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/qcom,gpucc-sc7180.h +++ b/sys/gnu/dts/include/dt-bindings/clock/qcom,gpucc-sc7180.h @@ -15,7 +15,8 @@ #define GPU_CC_CXO_CLK 6 #define GPU_CC_GMU_CLK_SRC 7 -/* CAM_CC GDSCRs */ +/* GPU_CC GDSCRs */ #define CX_GDSC 0 +#define GX_GDSC 1 #endif diff --git a/sys/gnu/dts/include/dt-bindings/clock/qcom,mss-sc7180.h b/sys/gnu/dts/include/dt-bindings/clock/qcom,mss-sc7180.h new file mode 100644 index 000000000000..f15a9ded2961 --- /dev/null +++ b/sys/gnu/dts/include/dt-bindings/clock/qcom,mss-sc7180.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_MSS_SC7180_H +#define _DT_BINDINGS_CLK_QCOM_MSS_SC7180_H + +#define MSS_AXI_CRYPTO_CLK 0 +#define MSS_AXI_NAV_CLK 1 + +#endif diff --git a/sys/gnu/dts/include/dt-bindings/clock/qcom,rpmcc.h b/sys/gnu/dts/include/dt-bindings/clock/qcom,rpmcc.h index 8e3095720552..ae74c43c485d 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/qcom,rpmcc.h +++ b/sys/gnu/dts/include/dt-bindings/clock/qcom,rpmcc.h @@ -37,6 +37,10 @@ #define RPM_XO_A0 27 #define RPM_XO_A1 28 #define RPM_XO_A2 29 +#define RPM_NSS_FABRIC_0_CLK 30 +#define RPM_NSS_FABRIC_0_A_CLK 31 +#define RPM_NSS_FABRIC_1_CLK 32 +#define RPM_NSS_FABRIC_1_A_CLK 33 /* SMD RPM clocks */ #define RPM_SMD_XO_CLK_SRC 0 diff --git a/sys/gnu/dts/include/dt-bindings/clock/qcom,rpmh.h b/sys/gnu/dts/include/dt-bindings/clock/qcom,rpmh.h index edcab3f7b7d3..2e6c54e65455 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/qcom,rpmh.h +++ b/sys/gnu/dts/include/dt-bindings/clock/qcom,rpmh.h @@ -1,5 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */ +/* Copyright (c) 2018, 2020, The Linux Foundation. All rights reserved. */ #ifndef _DT_BINDINGS_CLK_MSM_RPMH_H @@ -19,5 +19,7 @@ #define RPMH_RF_CLK3 10 #define RPMH_RF_CLK3_A 11 #define RPMH_IPA_CLK 12 +#define RPMH_LN_BB_CLK1 13 +#define RPMH_LN_BB_CLK1_A 14 #endif diff --git a/sys/gnu/dts/include/dt-bindings/clock/sprd,sc9863a-clk.h b/sys/gnu/dts/include/dt-bindings/clock/sprd,sc9863a-clk.h new file mode 100644 index 000000000000..901ba59676c2 --- /dev/null +++ b/sys/gnu/dts/include/dt-bindings/clock/sprd,sc9863a-clk.h @@ -0,0 +1,334 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Unisoc SC9863A platform clocks + * + * Copyright (C) 2019, Unisoc Communications Inc. + */ + +#ifndef _DT_BINDINGS_CLK_SC9863A_H_ +#define _DT_BINDINGS_CLK_SC9863A_H_ + +#define CLK_MPLL0_GATE 0 +#define CLK_DPLL0_GATE 1 +#define CLK_LPLL_GATE 2 +#define CLK_GPLL_GATE 3 +#define CLK_DPLL1_GATE 4 +#define CLK_MPLL1_GATE 5 +#define CLK_MPLL2_GATE 6 +#define CLK_ISPPLL_GATE 7 +#define CLK_PMU_APB_NUM (CLK_ISPPLL_GATE + 1) + +#define CLK_AUDIO_GATE 0 +#define CLK_RPLL 1 +#define CLK_RPLL_390M 2 +#define CLK_RPLL_260M 3 +#define CLK_RPLL_195M 4 +#define CLK_RPLL_26M 5 +#define CLK_ANLG_PHY_G5_NUM (CLK_RPLL_26M + 1) + +#define CLK_TWPLL 0 +#define CLK_TWPLL_768M 1 +#define CLK_TWPLL_384M 2 +#define CLK_TWPLL_192M 3 +#define CLK_TWPLL_96M 4 +#define CLK_TWPLL_48M 5 +#define CLK_TWPLL_24M 6 +#define CLK_TWPLL_12M 7 +#define CLK_TWPLL_512M 8 +#define CLK_TWPLL_256M 9 +#define CLK_TWPLL_128M 10 +#define CLK_TWPLL_64M 11 +#define CLK_TWPLL_307M2 12 +#define CLK_TWPLL_219M4 13 +#define CLK_TWPLL_170M6 14 +#define CLK_TWPLL_153M6 15 +#define CLK_TWPLL_76M8 16 +#define CLK_TWPLL_51M2 17 +#define CLK_TWPLL_38M4 18 +#define CLK_TWPLL_19M2 19 +#define CLK_LPLL 20 +#define CLK_LPLL_409M6 21 +#define CLK_LPLL_245M76 22 +#define CLK_GPLL 23 +#define CLK_ISPPLL 24 +#define CLK_ISPPLL_468M 25 +#define CLK_ANLG_PHY_G1_NUM (CLK_ISPPLL_468M + 1) + +#define CLK_DPLL0 0 +#define CLK_DPLL1 1 +#define CLK_DPLL0_933M 2 +#define CLK_DPLL0_622M3 3 +#define CLK_DPLL0_400M 4 +#define CLK_DPLL0_266M7 5 +#define CLK_DPLL0_123M1 6 +#define CLK_DPLL0_50M 7 +#define CLK_ANLG_PHY_G7_NUM (CLK_DPLL0_50M + 1) + +#define CLK_MPLL0 0 +#define CLK_MPLL1 1 +#define CLK_MPLL2 2 +#define CLK_MPLL2_675M 3 +#define CLK_ANLG_PHY_G4_NUM (CLK_MPLL2_675M + 1) + +#define CLK_AP_APB 0 +#define CLK_AP_CE 1 +#define CLK_NANDC_ECC 2 +#define CLK_NANDC_26M 3 +#define CLK_EMMC_32K 4 +#define CLK_SDIO0_32K 5 +#define CLK_SDIO1_32K 6 +#define CLK_SDIO2_32K 7 +#define CLK_OTG_UTMI 8 +#define CLK_AP_UART0 9 +#define CLK_AP_UART1 10 +#define CLK_AP_UART2 11 +#define CLK_AP_UART3 12 +#define CLK_AP_UART4 13 +#define CLK_AP_I2C0 14 +#define CLK_AP_I2C1 15 +#define CLK_AP_I2C2 16 +#define CLK_AP_I2C3 17 +#define CLK_AP_I2C4 18 +#define CLK_AP_I2C5 19 +#define CLK_AP_I2C6 20 +#define CLK_AP_SPI0 21 +#define CLK_AP_SPI1 22 +#define CLK_AP_SPI2 23 +#define CLK_AP_SPI3 24 +#define CLK_AP_IIS0 25 +#define CLK_AP_IIS1 26 +#define CLK_AP_IIS2 27 +#define CLK_SIM0 28 +#define CLK_SIM0_32K 29 +#define CLK_AP_CLK_NUM (CLK_SIM0_32K + 1) + +#define CLK_13M 0 +#define CLK_6M5 1 +#define CLK_4M3 2 +#define CLK_2M 3 +#define CLK_250K 4 +#define CLK_RCO_25M 5 +#define CLK_RCO_4M 6 +#define CLK_RCO_2M 7 +#define CLK_EMC 8 +#define CLK_AON_APB 9 +#define CLK_ADI 10 +#define CLK_AUX0 11 +#define CLK_AUX1 12 +#define CLK_AUX2 13 +#define CLK_PROBE 14 +#define CLK_PWM0 15 +#define CLK_PWM1 16 +#define CLK_PWM2 17 +#define CLK_AON_THM 18 +#define CLK_AUDIF 19 +#define CLK_CPU_DAP 20 +#define CLK_CPU_TS 21 +#define CLK_DJTAG_TCK 22 +#define CLK_EMC_REF 23 +#define CLK_CSSYS 24 +#define CLK_AON_PMU 25 +#define CLK_PMU_26M 26 +#define CLK_AON_TMR 27 +#define CLK_POWER_CPU 28 +#define CLK_AP_AXI 29 +#define CLK_SDIO0_2X 30 +#define CLK_SDIO1_2X 31 +#define CLK_SDIO2_2X 32 +#define CLK_EMMC_2X 33 +#define CLK_DPU 34 +#define CLK_DPU_DPI 35 +#define CLK_OTG_REF 36 +#define CLK_SDPHY_APB 37 +#define CLK_ALG_IO_APB 38 +#define CLK_GPU_CORE 39 +#define CLK_GPU_SOC 40 +#define CLK_MM_EMC 41 +#define CLK_MM_AHB 42 +#define CLK_BPC 43 +#define CLK_DCAM_IF 44 +#define CLK_ISP 45 +#define CLK_JPG 46 +#define CLK_CPP 47 +#define CLK_SENSOR0 48 +#define CLK_SENSOR1 49 +#define CLK_SENSOR2 50 +#define CLK_MM_VEMC 51 +#define CLK_MM_VAHB 52 +#define CLK_VSP 53 +#define CLK_CORE0 54 +#define CLK_CORE1 55 +#define CLK_CORE2 56 +#define CLK_CORE3 57 +#define CLK_CORE4 58 +#define CLK_CORE5 59 +#define CLK_CORE6 60 +#define CLK_CORE7 61 +#define CLK_SCU 62 +#define CLK_ACE 63 +#define CLK_AXI_PERIPH 64 +#define CLK_AXI_ACP 65 +#define CLK_ATB 66 +#define CLK_DEBUG_APB 67 +#define CLK_GIC 68 +#define CLK_PERIPH 69 +#define CLK_AON_CLK_NUM (CLK_VSP + 1) + +#define CLK_OTG_EB 0 +#define CLK_DMA_EB 1 +#define CLK_CE_EB 2 +#define CLK_NANDC_EB 3 +#define CLK_SDIO0_EB 4 +#define CLK_SDIO1_EB 5 +#define CLK_SDIO2_EB 6 +#define CLK_EMMC_EB 7 +#define CLK_EMMC_32K_EB 8 +#define CLK_SDIO0_32K_EB 9 +#define CLK_SDIO1_32K_EB 10 +#define CLK_SDIO2_32K_EB 11 +#define CLK_NANDC_26M_EB 12 +#define CLK_DMA_EB2 13 +#define CLK_CE_EB2 14 +#define CLK_AP_AHB_GATE_NUM (CLK_CE_EB2 + 1) + +#define CLK_GPIO_EB 0 +#define CLK_PWM0_EB 1 +#define CLK_PWM1_EB 2 +#define CLK_PWM2_EB 3 +#define CLK_PWM3_EB 4 +#define CLK_KPD_EB 5 +#define CLK_AON_SYST_EB 6 +#define CLK_AP_SYST_EB 7 +#define CLK_AON_TMR_EB 8 +#define CLK_EFUSE_EB 9 +#define CLK_EIC_EB 10 +#define CLK_INTC_EB 11 +#define CLK_ADI_EB 12 +#define CLK_AUDIF_EB 13 +#define CLK_AUD_EB 14 +#define CLK_VBC_EB 15 +#define CLK_PIN_EB 16 +#define CLK_AP_WDG_EB 17 +#define CLK_MM_EB 18 +#define CLK_AON_APB_CKG_EB 19 +#define CLK_CA53_TS0_EB 20 +#define CLK_CA53_TS1_EB 21 +#define CLK_CS53_DAP_EB 22 +#define CLK_PMU_EB 23 +#define CLK_THM_EB 24 +#define CLK_AUX0_EB 25 +#define CLK_AUX1_EB 26 +#define CLK_AUX2_EB 27 +#define CLK_PROBE_EB 28 +#define CLK_EMC_REF_EB 29 +#define CLK_CA53_WDG_EB 30 +#define CLK_AP_TMR1_EB 31 +#define CLK_AP_TMR2_EB 32 +#define CLK_DISP_EMC_EB 33 +#define CLK_ZIP_EMC_EB 34 +#define CLK_GSP_EMC_EB 35 +#define CLK_MM_VSP_EB 36 +#define CLK_MDAR_EB 37 +#define CLK_RTC4M0_CAL_EB 38 +#define CLK_RTC4M1_CAL_EB 39 +#define CLK_DJTAG_EB 40 +#define CLK_MBOX_EB 41 +#define CLK_AON_DMA_EB 42 +#define CLK_AON_APB_DEF_EB 43 +#define CLK_CA5_TS0_EB 44 +#define CLK_DBG_EB 45 +#define CLK_DBG_EMC_EB 46 +#define CLK_CROSS_TRIG_EB 47 +#define CLK_SERDES_DPHY_EB 48 +#define CLK_ARCH_RTC_EB 49 +#define CLK_KPD_RTC_EB 50 +#define CLK_AON_SYST_RTC_EB 51 +#define CLK_AP_SYST_RTC_EB 52 +#define CLK_AON_TMR_RTC_EB 53 +#define CLK_AP_TMR0_RTC_EB 54 +#define CLK_EIC_RTC_EB 55 +#define CLK_EIC_RTCDV5_EB 56 +#define CLK_AP_WDG_RTC_EB 57 +#define CLK_CA53_WDG_RTC_EB 58 +#define CLK_THM_RTC_EB 59 +#define CLK_ATHMA_RTC_EB 60 +#define CLK_GTHMA_RTC_EB 61 +#define CLK_ATHMA_RTC_A_EB 62 +#define CLK_GTHMA_RTC_A_EB 63 +#define CLK_AP_TMR1_RTC_EB 64 +#define CLK_AP_TMR2_RTC_EB 65 +#define CLK_DXCO_LC_RTC_EB 66 +#define CLK_BB_CAL_RTC_EB 67 +#define CLK_GNU_EB 68 +#define CLK_DISP_EB 69 +#define CLK_MM_EMC_EB 70 +#define CLK_POWER_CPU_EB 71 +#define CLK_HW_I2C_EB 72 +#define CLK_MM_VSP_EMC_EB 73 +#define CLK_VSP_EB 74 +#define CLK_CSSYS_EB 75 +#define CLK_DMC_EB 76 +#define CLK_ROSC_EB 77 +#define CLK_S_D_CFG_EB 78 +#define CLK_S_D_REF_EB 79 +#define CLK_B_DMA_EB 80 +#define CLK_ANLG_EB 81 +#define CLK_ANLG_APB_EB 82 +#define CLK_BSMTMR_EB 83 +#define CLK_AP_AXI_EB 84 +#define CLK_AP_INTC0_EB 85 +#define CLK_AP_INTC1_EB 86 +#define CLK_AP_INTC2_EB 87 +#define CLK_AP_INTC3_EB 88 +#define CLK_AP_INTC4_EB 89 +#define CLK_AP_INTC5_EB 90 +#define CLK_SCC_EB 91 +#define CLK_DPHY_CFG_EB 92 +#define CLK_DPHY_REF_EB 93 +#define CLK_CPHY_CFG_EB 94 +#define CLK_OTG_REF_EB 95 +#define CLK_SERDES_EB 96 +#define CLK_AON_AP_EMC_EB 97 +#define CLK_AON_APB_GATE_NUM (CLK_AON_AP_EMC_EB + 1) + +#define CLK_MAHB_CKG_EB 0 +#define CLK_MDCAM_EB 1 +#define CLK_MISP_EB 2 +#define CLK_MAHBCSI_EB 3 +#define CLK_MCSI_S_EB 4 +#define CLK_MCSI_T_EB 5 +#define CLK_DCAM_AXI_EB 6 +#define CLK_ISP_AXI_EB 7 +#define CLK_MCSI_EB 8 +#define CLK_MCSI_S_CKG_EB 9 +#define CLK_MCSI_T_CKG_EB 10 +#define CLK_SENSOR0_EB 11 +#define CLK_SENSOR1_EB 12 +#define CLK_SENSOR2_EB 13 +#define CLK_MCPHY_CFG_EB 14 +#define CLK_MM_GATE_NUM (CLK_MCPHY_CFG_EB + 1) + +#define CLK_SIM0_EB 0 +#define CLK_IIS0_EB 1 +#define CLK_IIS1_EB 2 +#define CLK_IIS2_EB 3 +#define CLK_SPI0_EB 4 +#define CLK_SPI1_EB 5 +#define CLK_SPI2_EB 6 +#define CLK_I2C0_EB 7 +#define CLK_I2C1_EB 8 +#define CLK_I2C2_EB 9 +#define CLK_I2C3_EB 10 +#define CLK_I2C4_EB 11 +#define CLK_UART0_EB 12 +#define CLK_UART1_EB 13 +#define CLK_UART2_EB 14 +#define CLK_UART3_EB 15 +#define CLK_UART4_EB 16 +#define CLK_SIM0_32K_EB 17 +#define CLK_SPI3_EB 18 +#define CLK_I2C5_EB 19 +#define CLK_I2C6_EB 20 +#define CLK_AP_APB_GATE_NUM (CLK_I2C6_EB + 1) + +#endif /* _DT_BINDINGS_CLK_SC9863A_H_ */ diff --git a/sys/gnu/dts/include/dt-bindings/clock/sun50i-a64-ccu.h b/sys/gnu/dts/include/dt-bindings/clock/sun50i-a64-ccu.h index e512a1c9b0fc..318eb15c414c 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/sun50i-a64-ccu.h +++ b/sys/gnu/dts/include/dt-bindings/clock/sun50i-a64-ccu.h @@ -131,7 +131,7 @@ #define CLK_AVS 109 #define CLK_HDMI 110 #define CLK_HDMI_DDC 111 - +#define CLK_MBUS 112 #define CLK_DSI_DPHY 113 #define CLK_GPU 114 diff --git a/sys/gnu/dts/include/dt-bindings/clock/tegra114-car.h b/sys/gnu/dts/include/dt-bindings/clock/tegra114-car.h index bb5c2c999c05..df59aaf5bf34 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/tegra114-car.h +++ b/sys/gnu/dts/include/dt-bindings/clock/tegra114-car.h @@ -228,6 +228,8 @@ #define TEGRA114_CLK_CLK_M 201 #define TEGRA114_CLK_CLK_M_DIV2 202 #define TEGRA114_CLK_CLK_M_DIV4 203 +#define TEGRA114_CLK_OSC_DIV2 202 +#define TEGRA114_CLK_OSC_DIV4 203 #define TEGRA114_CLK_PLL_REF 204 #define TEGRA114_CLK_PLL_C 205 #define TEGRA114_CLK_PLL_C_OUT1 206 @@ -274,7 +276,7 @@ #define TEGRA114_CLK_CLK_OUT_2 246 #define TEGRA114_CLK_CLK_OUT_3 247 #define TEGRA114_CLK_BLINK 248 -/* 249 */ +#define TEGRA114_CLK_OSC 249 /* 250 */ /* 251 */ #define TEGRA114_CLK_XUSB_HOST_SRC 252 diff --git a/sys/gnu/dts/include/dt-bindings/clock/tegra124-car-common.h b/sys/gnu/dts/include/dt-bindings/clock/tegra124-car-common.h index 0c4f5be0a742..2a9acd592bff 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/tegra124-car-common.h +++ b/sys/gnu/dts/include/dt-bindings/clock/tegra124-car-common.h @@ -227,6 +227,8 @@ #define TEGRA124_CLK_CLK_M 201 #define TEGRA124_CLK_CLK_M_DIV2 202 #define TEGRA124_CLK_CLK_M_DIV4 203 +#define TEGRA124_CLK_OSC_DIV2 202 +#define TEGRA124_CLK_OSC_DIV4 203 #define TEGRA124_CLK_PLL_REF 204 #define TEGRA124_CLK_PLL_C 205 #define TEGRA124_CLK_PLL_C_OUT1 206 @@ -273,7 +275,7 @@ #define TEGRA124_CLK_CLK_OUT_2 246 #define TEGRA124_CLK_CLK_OUT_3 247 #define TEGRA124_CLK_BLINK 248 -/* 249 */ +#define TEGRA124_CLK_OSC 249 /* 250 */ /* 251 */ #define TEGRA124_CLK_XUSB_HOST_SRC 252 diff --git a/sys/gnu/dts/include/dt-bindings/clock/tegra210-car.h b/sys/gnu/dts/include/dt-bindings/clock/tegra210-car.h index 44f60623f99b..7a8f10b9a66d 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/tegra210-car.h +++ b/sys/gnu/dts/include/dt-bindings/clock/tegra210-car.h @@ -262,6 +262,8 @@ #define TEGRA210_CLK_CLK_M 233 #define TEGRA210_CLK_CLK_M_DIV2 234 #define TEGRA210_CLK_CLK_M_DIV4 235 +#define TEGRA210_CLK_OSC_DIV2 234 +#define TEGRA210_CLK_OSC_DIV4 235 #define TEGRA210_CLK_PLL_REF 236 #define TEGRA210_CLK_PLL_C 237 #define TEGRA210_CLK_PLL_C_OUT1 238 @@ -355,7 +357,7 @@ #define TEGRA210_CLK_PLL_A_OUT_ADSP 323 #define TEGRA210_CLK_PLL_A_OUT0_OUT_ADSP 324 /* 325 */ -/* 326 */ +#define TEGRA210_CLK_OSC 326 /* 327 */ /* 328 */ /* 329 */ diff --git a/sys/gnu/dts/include/dt-bindings/clock/tegra30-car.h b/sys/gnu/dts/include/dt-bindings/clock/tegra30-car.h index 3c90f1535551..7b542c10fc27 100644 --- a/sys/gnu/dts/include/dt-bindings/clock/tegra30-car.h +++ b/sys/gnu/dts/include/dt-bindings/clock/tegra30-car.h @@ -196,6 +196,8 @@ #define TEGRA30_CLK_CLK_M 171 #define TEGRA30_CLK_CLK_M_DIV2 172 #define TEGRA30_CLK_CLK_M_DIV4 173 +#define TEGRA30_CLK_OSC_DIV2 172 +#define TEGRA30_CLK_OSC_DIV4 173 #define TEGRA30_CLK_PLL_REF 174 #define TEGRA30_CLK_PLL_C 175 #define TEGRA30_CLK_PLL_C_OUT1 176 @@ -243,7 +245,7 @@ #define TEGRA30_CLK_HCLK 217 #define TEGRA30_CLK_PCLK 218 /* 219 */ -/* 220 */ +#define TEGRA30_CLK_OSC 220 /* 221 */ /* 222 */ /* 223 */ diff --git a/sys/gnu/dts/include/dt-bindings/display/sdtv-standards.h b/sys/gnu/dts/include/dt-bindings/display/sdtv-standards.h new file mode 100644 index 000000000000..fbc1a3db2ea7 --- /dev/null +++ b/sys/gnu/dts/include/dt-bindings/display/sdtv-standards.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0-only or X11 */ +/* + * Copyright 2019 Pengutronix, Marco Felsch <kernel@pengutronix.de> + */ + +#ifndef _DT_BINDINGS_DISPLAY_SDTV_STDS_H +#define _DT_BINDINGS_DISPLAY_SDTV_STDS_H + +/* + * Attention: Keep the SDTV_STD_* bit definitions in sync with + * include/uapi/linux/videodev2.h V4L2_STD_* bit definitions. + */ +/* One bit for each standard */ +#define SDTV_STD_PAL_B 0x00000001 +#define SDTV_STD_PAL_B1 0x00000002 +#define SDTV_STD_PAL_G 0x00000004 +#define SDTV_STD_PAL_H 0x00000008 +#define SDTV_STD_PAL_I 0x00000010 +#define SDTV_STD_PAL_D 0x00000020 +#define SDTV_STD_PAL_D1 0x00000040 +#define SDTV_STD_PAL_K 0x00000080 + +#define SDTV_STD_PAL (SDTV_STD_PAL_B | \ + SDTV_STD_PAL_B1 | \ + SDTV_STD_PAL_G | \ + SDTV_STD_PAL_H | \ + SDTV_STD_PAL_I | \ + SDTV_STD_PAL_D | \ + SDTV_STD_PAL_D1 | \ + SDTV_STD_PAL_K) + +#define SDTV_STD_PAL_M 0x00000100 +#define SDTV_STD_PAL_N 0x00000200 +#define SDTV_STD_PAL_Nc 0x00000400 +#define SDTV_STD_PAL_60 0x00000800 + +#define SDTV_STD_NTSC_M 0x00001000 /* BTSC */ +#define SDTV_STD_NTSC_M_JP 0x00002000 /* EIA-J */ +#define SDTV_STD_NTSC_443 0x00004000 +#define SDTV_STD_NTSC_M_KR 0x00008000 /* FM A2 */ + +#define SDTV_STD_NTSC (SDTV_STD_NTSC_M | \ + SDTV_STD_NTSC_M_JP | \ + SDTV_STD_NTSC_M_KR) + +#define SDTV_STD_SECAM_B 0x00010000 +#define SDTV_STD_SECAM_D 0x00020000 +#define SDTV_STD_SECAM_G 0x00040000 +#define SDTV_STD_SECAM_H 0x00080000 +#define SDTV_STD_SECAM_K 0x00100000 +#define SDTV_STD_SECAM_K1 0x00200000 +#define SDTV_STD_SECAM_L 0x00400000 +#define SDTV_STD_SECAM_LC 0x00800000 + +#define SDTV_STD_SECAM (SDTV_STD_SECAM_B | \ + SDTV_STD_SECAM_D | \ + SDTV_STD_SECAM_G | \ + SDTV_STD_SECAM_H | \ + SDTV_STD_SECAM_K | \ + SDTV_STD_SECAM_K1 | \ + SDTV_STD_SECAM_L | \ + SDTV_STD_SECAM_LC) + +/* Standards for Countries with 60Hz Line frequency */ +#define SDTV_STD_525_60 (SDTV_STD_PAL_M | \ + SDTV_STD_PAL_60 | \ + SDTV_STD_NTSC | \ + SDTV_STD_NTSC_443) + +/* Standards for Countries with 50Hz Line frequency */ +#define SDTV_STD_625_50 (SDTV_STD_PAL | \ + SDTV_STD_PAL_N | \ + SDTV_STD_PAL_Nc | \ + SDTV_STD_SECAM) + +#endif /* _DT_BINDINGS_DISPLAY_SDTV_STDS_H */ diff --git a/sys/gnu/dts/include/dt-bindings/input/linux-event-codes.h b/sys/gnu/dts/include/dt-bindings/input/linux-event-codes.h index 6923dc7e0298..b6a835d37826 100644 --- a/sys/gnu/dts/include/dt-bindings/input/linux-event-codes.h +++ b/sys/gnu/dts/include/dt-bindings/input/linux-event-codes.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * Input event codes * diff --git a/sys/gnu/dts/include/dt-bindings/interconnect/qcom,osm-l3.h b/sys/gnu/dts/include/dt-bindings/interconnect/qcom,osm-l3.h new file mode 100644 index 000000000000..54858ff7674d --- /dev/null +++ b/sys/gnu/dts/include/dt-bindings/interconnect/qcom,osm-l3.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 The Linux Foundation. All rights reserved. + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_OSM_L3_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_OSM_L3_H + +#define MASTER_OSM_L3_APPS 0 +#define SLAVE_OSM_L3 1 + +#endif diff --git a/sys/gnu/dts/include/dt-bindings/interconnect/qcom,sc7180.h b/sys/gnu/dts/include/dt-bindings/interconnect/qcom,sc7180.h new file mode 100644 index 000000000000..f9970f6032eb --- /dev/null +++ b/sys/gnu/dts/include/dt-bindings/interconnect/qcom,sc7180.h @@ -0,0 +1,161 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Qualcomm SC7180 interconnect IDs + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SC7180_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_SC7180_H + +#define MASTER_A1NOC_CFG 0 +#define MASTER_QSPI 1 +#define MASTER_QUP_0 2 +#define MASTER_SDCC_2 3 +#define MASTER_EMMC 4 +#define MASTER_UFS_MEM 5 +#define SLAVE_A1NOC_SNOC 6 +#define SLAVE_SERVICE_A1NOC 7 + +#define MASTER_A2NOC_CFG 0 +#define MASTER_QDSS_BAM 1 +#define MASTER_QUP_1 2 +#define MASTER_USB3 3 +#define MASTER_CRYPTO 4 +#define MASTER_IPA 5 +#define MASTER_QDSS_ETR 6 +#define SLAVE_A2NOC_SNOC 7 +#define SLAVE_SERVICE_A2NOC 8 + +#define MASTER_CAMNOC_HF0_UNCOMP 0 +#define MASTER_CAMNOC_HF1_UNCOMP 1 +#define MASTER_CAMNOC_SF_UNCOMP 2 +#define SLAVE_CAMNOC_UNCOMP 3 + +#define MASTER_NPU 0 +#define MASTER_NPU_PROC 1 +#define SLAVE_CDSP_GEM_NOC 2 + +#define MASTER_SNOC_CNOC 0 +#define MASTER_QDSS_DAP 1 +#define SLAVE_A1NOC_CFG 2 +#define SLAVE_A2NOC_CFG 3 +#define SLAVE_AHB2PHY_SOUTH 4 +#define SLAVE_AHB2PHY_CENTER 5 +#define SLAVE_AOP 6 +#define SLAVE_AOSS 7 +#define SLAVE_BOOT_ROM 8 +#define SLAVE_CAMERA_CFG 9 +#define SLAVE_CAMERA_NRT_THROTTLE_CFG 10 +#define SLAVE_CAMERA_RT_THROTTLE_CFG 11 +#define SLAVE_CLK_CTL 12 +#define SLAVE_RBCPR_CX_CFG 13 +#define SLAVE_RBCPR_MX_CFG 14 +#define SLAVE_CRYPTO_0_CFG 15 +#define SLAVE_DCC_CFG 16 +#define SLAVE_CNOC_DDRSS 17 +#define SLAVE_DISPLAY_CFG 18 +#define SLAVE_DISPLAY_RT_THROTTLE_CFG 19 +#define SLAVE_DISPLAY_THROTTLE_CFG 20 +#define SLAVE_EMMC_CFG 21 +#define SLAVE_GLM 22 +#define SLAVE_GFX3D_CFG 23 +#define SLAVE_IMEM_CFG 24 +#define SLAVE_IPA_CFG 25 +#define SLAVE_CNOC_MNOC_CFG 26 +#define SLAVE_CNOC_MSS 27 +#define SLAVE_NPU_CFG 28 +#define SLAVE_NPU_DMA_BWMON_CFG 29 +#define SLAVE_NPU_PROC_BWMON_CFG 30 +#define SLAVE_PDM 31 +#define SLAVE_PIMEM_CFG 32 +#define SLAVE_PRNG 33 +#define SLAVE_QDSS_CFG 34 +#define SLAVE_QM_CFG 35 +#define SLAVE_QM_MPU_CFG 36 +#define SLAVE_QSPI_0 37 +#define SLAVE_QUP_0 38 +#define SLAVE_QUP_1 39 +#define SLAVE_SDCC_2 40 +#define SLAVE_SECURITY 41 +#define SLAVE_SNOC_CFG 42 +#define SLAVE_TCSR 43 +#define SLAVE_TLMM_WEST 44 +#define SLAVE_TLMM_NORTH 45 +#define SLAVE_TLMM_SOUTH 46 +#define SLAVE_UFS_MEM_CFG 47 +#define SLAVE_USB3 48 +#define SLAVE_VENUS_CFG 49 +#define SLAVE_VENUS_THROTTLE_CFG 50 +#define SLAVE_VSENSE_CTRL_CFG 51 +#define SLAVE_SERVICE_CNOC 52 + +#define MASTER_CNOC_DC_NOC 0 +#define SLAVE_GEM_NOC_CFG 1 +#define SLAVE_LLCC_CFG 2 + +#define MASTER_APPSS_PROC 0 +#define MASTER_SYS_TCU 1 +#define MASTER_GEM_NOC_CFG 2 +#define MASTER_COMPUTE_NOC 3 +#define MASTER_MNOC_HF_MEM_NOC 4 +#define MASTER_MNOC_SF_MEM_NOC 5 +#define MASTER_SNOC_GC_MEM_NOC 6 +#define MASTER_SNOC_SF_MEM_NOC 7 +#define MASTER_GFX3D 8 +#define SLAVE_MSS_PROC_MS_MPU_CFG 9 +#define SLAVE_GEM_NOC_SNOC 10 +#define SLAVE_LLCC 11 +#define SLAVE_SERVICE_GEM_NOC 12 + +#define MASTER_IPA_CORE 0 +#define SLAVE_IPA_CORE 1 + +#define MASTER_LLCC 0 +#define SLAVE_EBI1 1 + +#define MASTER_CNOC_MNOC_CFG 0 +#define MASTER_CAMNOC_HF0 1 +#define MASTER_CAMNOC_HF1 2 +#define MASTER_CAMNOC_SF 3 +#define MASTER_MDP0 4 +#define MASTER_ROTATOR 5 +#define MASTER_VIDEO_P0 6 +#define MASTER_VIDEO_PROC 7 +#define SLAVE_MNOC_HF_MEM_NOC 8 +#define SLAVE_MNOC_SF_MEM_NOC 9 +#define SLAVE_SERVICE_MNOC 10 + +#define MASTER_NPU_SYS 0 +#define MASTER_NPU_NOC_CFG 1 +#define SLAVE_NPU_CAL_DP0 2 +#define SLAVE_NPU_CP 3 +#define SLAVE_NPU_INT_DMA_BWMON_CFG 4 +#define SLAVE_NPU_DPM 5 +#define SLAVE_ISENSE_CFG 6 +#define SLAVE_NPU_LLM_CFG 7 +#define SLAVE_NPU_TCM 8 +#define SLAVE_NPU_COMPUTE_NOC 9 +#define SLAVE_SERVICE_NPU_NOC 10 + +#define MASTER_QUP_CORE_0 0 +#define MASTER_QUP_CORE_1 1 +#define SLAVE_QUP_CORE_0 2 +#define SLAVE_QUP_CORE_1 3 + +#define MASTER_SNOC_CFG 0 +#define MASTER_A1NOC_SNOC 1 +#define MASTER_A2NOC_SNOC 2 +#define MASTER_GEM_NOC_SNOC 3 +#define MASTER_PIMEM 4 +#define SLAVE_APPSS 5 +#define SLAVE_SNOC_CNOC 6 +#define SLAVE_SNOC_GEM_NOC_GC 7 +#define SLAVE_SNOC_GEM_NOC_SF 8 +#define SLAVE_IMEM 9 +#define SLAVE_PIMEM 10 +#define SLAVE_SERVICE_SNOC 11 +#define SLAVE_QDSS_STM 12 +#define SLAVE_TCU 13 + +#endif diff --git a/sys/gnu/dts/include/dt-bindings/interconnect/qcom,sdm845.h b/sys/gnu/dts/include/dt-bindings/interconnect/qcom,sdm845.h index 7b2393be7361..290be38f40e6 100644 --- a/sys/gnu/dts/include/dt-bindings/interconnect/qcom,sdm845.h +++ b/sys/gnu/dts/include/dt-bindings/interconnect/qcom,sdm845.h @@ -10,134 +10,139 @@ #define __DT_BINDINGS_INTERCONNECT_QCOM_SDM845_H #define MASTER_A1NOC_CFG 0 -#define MASTER_BLSP_1 1 -#define MASTER_TSIF 2 -#define MASTER_SDCC_2 3 -#define MASTER_SDCC_4 4 -#define MASTER_UFS_CARD 5 -#define MASTER_UFS_MEM 6 -#define MASTER_PCIE_0 7 -#define MASTER_A2NOC_CFG 8 -#define MASTER_QDSS_BAM 9 -#define MASTER_BLSP_2 10 -#define MASTER_CNOC_A2NOC 11 -#define MASTER_CRYPTO 12 -#define MASTER_IPA 13 -#define MASTER_PCIE_1 14 -#define MASTER_QDSS_ETR 15 -#define MASTER_USB3_0 16 -#define MASTER_USB3_1 17 -#define MASTER_CAMNOC_HF0_UNCOMP 18 -#define MASTER_CAMNOC_HF1_UNCOMP 19 -#define MASTER_CAMNOC_SF_UNCOMP 20 -#define MASTER_SPDM 21 -#define MASTER_TIC 22 -#define MASTER_SNOC_CNOC 23 -#define MASTER_QDSS_DAP 24 -#define MASTER_CNOC_DC_NOC 25 -#define MASTER_APPSS_PROC 26 -#define MASTER_GNOC_CFG 27 -#define MASTER_LLCC 28 -#define MASTER_TCU_0 29 -#define MASTER_MEM_NOC_CFG 30 -#define MASTER_GNOC_MEM_NOC 31 -#define MASTER_MNOC_HF_MEM_NOC 32 -#define MASTER_MNOC_SF_MEM_NOC 33 -#define MASTER_SNOC_GC_MEM_NOC 34 -#define MASTER_SNOC_SF_MEM_NOC 35 -#define MASTER_GFX3D 36 -#define MASTER_CNOC_MNOC_CFG 37 -#define MASTER_CAMNOC_HF0 38 -#define MASTER_CAMNOC_HF1 39 -#define MASTER_CAMNOC_SF 40 -#define MASTER_MDP0 41 -#define MASTER_MDP1 42 -#define MASTER_ROTATOR 43 -#define MASTER_VIDEO_P0 44 -#define MASTER_VIDEO_P1 45 -#define MASTER_VIDEO_PROC 46 -#define MASTER_SNOC_CFG 47 -#define MASTER_A1NOC_SNOC 48 -#define MASTER_A2NOC_SNOC 49 -#define MASTER_GNOC_SNOC 50 -#define MASTER_MEM_NOC_SNOC 51 -#define MASTER_ANOC_PCIE_SNOC 52 -#define MASTER_PIMEM 53 -#define MASTER_GIC 54 -#define SLAVE_A1NOC_SNOC 55 -#define SLAVE_SERVICE_A1NOC 56 -#define SLAVE_ANOC_PCIE_A1NOC_SNOC 57 -#define SLAVE_A2NOC_SNOC 58 -#define SLAVE_ANOC_PCIE_SNOC 59 -#define SLAVE_SERVICE_A2NOC 60 -#define SLAVE_CAMNOC_UNCOMP 61 -#define SLAVE_A1NOC_CFG 62 -#define SLAVE_A2NOC_CFG 63 -#define SLAVE_AOP 64 -#define SLAVE_AOSS 65 -#define SLAVE_CAMERA_CFG 66 -#define SLAVE_CLK_CTL 67 -#define SLAVE_CDSP_CFG 68 -#define SLAVE_RBCPR_CX_CFG 69 -#define SLAVE_CRYPTO_0_CFG 70 -#define SLAVE_DCC_CFG 71 -#define SLAVE_CNOC_DDRSS 72 -#define SLAVE_DISPLAY_CFG 73 -#define SLAVE_GLM 74 -#define SLAVE_GFX3D_CFG 75 -#define SLAVE_IMEM_CFG 76 -#define SLAVE_IPA_CFG 77 -#define SLAVE_CNOC_MNOC_CFG 78 -#define SLAVE_PCIE_0_CFG 79 -#define SLAVE_PCIE_1_CFG 80 -#define SLAVE_PDM 81 -#define SLAVE_SOUTH_PHY_CFG 82 -#define SLAVE_PIMEM_CFG 83 -#define SLAVE_PRNG 84 -#define SLAVE_QDSS_CFG 85 -#define SLAVE_BLSP_2 86 -#define SLAVE_BLSP_1 87 -#define SLAVE_SDCC_2 88 -#define SLAVE_SDCC_4 89 -#define SLAVE_SNOC_CFG 90 -#define SLAVE_SPDM_WRAPPER 91 -#define SLAVE_SPSS_CFG 92 -#define SLAVE_TCSR 93 -#define SLAVE_TLMM_NORTH 94 -#define SLAVE_TLMM_SOUTH 95 -#define SLAVE_TSIF 96 -#define SLAVE_UFS_CARD_CFG 97 -#define SLAVE_UFS_MEM_CFG 98 -#define SLAVE_USB3_0 99 -#define SLAVE_USB3_1 100 -#define SLAVE_VENUS_CFG 101 -#define SLAVE_VSENSE_CTRL_CFG 102 -#define SLAVE_CNOC_A2NOC 103 -#define SLAVE_SERVICE_CNOC 104 -#define SLAVE_LLCC_CFG 105 -#define SLAVE_MEM_NOC_CFG 106 -#define SLAVE_GNOC_SNOC 107 -#define SLAVE_GNOC_MEM_NOC 108 -#define SLAVE_SERVICE_GNOC 109 -#define SLAVE_EBI1 110 -#define SLAVE_MSS_PROC_MS_MPU_CFG 111 -#define SLAVE_MEM_NOC_GNOC 112 -#define SLAVE_LLCC 113 -#define SLAVE_MEM_NOC_SNOC 114 -#define SLAVE_SERVICE_MEM_NOC 115 -#define SLAVE_MNOC_SF_MEM_NOC 116 -#define SLAVE_MNOC_HF_MEM_NOC 117 -#define SLAVE_SERVICE_MNOC 118 -#define SLAVE_APPSS 119 -#define SLAVE_SNOC_CNOC 120 -#define SLAVE_SNOC_MEM_NOC_GC 121 -#define SLAVE_SNOC_MEM_NOC_SF 122 -#define SLAVE_IMEM 123 -#define SLAVE_PCIE_0 124 -#define SLAVE_PCIE_1 125 -#define SLAVE_PIMEM 126 -#define SLAVE_SERVICE_SNOC 127 -#define SLAVE_QDSS_STM 128 -#define SLAVE_TCU 129 +#define MASTER_TSIF 1 +#define MASTER_SDCC_2 2 +#define MASTER_SDCC_4 3 +#define MASTER_UFS_CARD 4 +#define MASTER_UFS_MEM 5 +#define MASTER_PCIE_0 6 +#define SLAVE_A1NOC_SNOC 7 +#define SLAVE_SERVICE_A1NOC 8 +#define SLAVE_ANOC_PCIE_A1NOC_SNOC 9 + +#define MASTER_A2NOC_CFG 0 +#define MASTER_QDSS_BAM 1 +#define MASTER_CNOC_A2NOC 2 +#define MASTER_CRYPTO 3 +#define MASTER_IPA 4 +#define MASTER_PCIE_1 5 +#define MASTER_QDSS_ETR 6 +#define MASTER_USB3_0 7 +#define MASTER_USB3_1 8 +#define SLAVE_A2NOC_SNOC 9 +#define SLAVE_ANOC_PCIE_SNOC 10 +#define SLAVE_SERVICE_A2NOC 11 + +#define MASTER_SPDM 0 +#define MASTER_TIC 1 +#define MASTER_SNOC_CNOC 2 +#define MASTER_QDSS_DAP 3 +#define SLAVE_A1NOC_CFG 4 +#define SLAVE_A2NOC_CFG 5 +#define SLAVE_AOP 6 +#define SLAVE_AOSS 7 +#define SLAVE_CAMERA_CFG 8 +#define SLAVE_CLK_CTL 9 +#define SLAVE_CDSP_CFG 10 +#define SLAVE_RBCPR_CX_CFG 11 +#define SLAVE_CRYPTO_0_CFG 12 +#define SLAVE_DCC_CFG 13 +#define SLAVE_CNOC_DDRSS 14 +#define SLAVE_DISPLAY_CFG 15 +#define SLAVE_GLM 16 +#define SLAVE_GFX3D_CFG 17 +#define SLAVE_IMEM_CFG 18 +#define SLAVE_IPA_CFG 19 +#define SLAVE_CNOC_MNOC_CFG 20 +#define SLAVE_PCIE_0_CFG 21 +#define SLAVE_PCIE_1_CFG 22 +#define SLAVE_PDM 23 +#define SLAVE_SOUTH_PHY_CFG 24 +#define SLAVE_PIMEM_CFG 25 +#define SLAVE_PRNG 26 +#define SLAVE_QDSS_CFG 27 +#define SLAVE_BLSP_2 28 +#define SLAVE_BLSP_1 29 +#define SLAVE_SDCC_2 30 +#define SLAVE_SDCC_4 31 +#define SLAVE_SNOC_CFG 32 +#define SLAVE_SPDM_WRAPPER 33 +#define SLAVE_SPSS_CFG 34 +#define SLAVE_TCSR 35 +#define SLAVE_TLMM_NORTH 36 +#define SLAVE_TLMM_SOUTH 37 +#define SLAVE_TSIF 38 +#define SLAVE_UFS_CARD_CFG 39 +#define SLAVE_UFS_MEM_CFG 40 +#define SLAVE_USB3_0 41 +#define SLAVE_USB3_1 42 +#define SLAVE_VENUS_CFG 43 +#define SLAVE_VSENSE_CTRL_CFG 44 +#define SLAVE_CNOC_A2NOC 45 +#define SLAVE_SERVICE_CNOC 46 + +#define MASTER_CNOC_DC_NOC 0 +#define SLAVE_LLCC_CFG 1 +#define SLAVE_MEM_NOC_CFG 2 + +#define MASTER_APPSS_PROC 0 +#define MASTER_GNOC_CFG 1 +#define SLAVE_GNOC_SNOC 2 +#define SLAVE_GNOC_MEM_NOC 3 +#define SLAVE_SERVICE_GNOC 4 + +#define MASTER_TCU_0 0 +#define MASTER_MEM_NOC_CFG 1 +#define MASTER_GNOC_MEM_NOC 2 +#define MASTER_MNOC_HF_MEM_NOC 3 +#define MASTER_MNOC_SF_MEM_NOC 4 +#define MASTER_SNOC_GC_MEM_NOC 5 +#define MASTER_SNOC_SF_MEM_NOC 6 +#define MASTER_GFX3D 7 +#define SLAVE_MSS_PROC_MS_MPU_CFG 8 +#define SLAVE_MEM_NOC_GNOC 9 +#define SLAVE_LLCC 10 +#define SLAVE_MEM_NOC_SNOC 11 +#define SLAVE_SERVICE_MEM_NOC 12 +#define MASTER_LLCC 13 +#define SLAVE_EBI1 14 + +#define MASTER_CNOC_MNOC_CFG 0 +#define MASTER_CAMNOC_HF0 1 +#define MASTER_CAMNOC_HF1 2 +#define MASTER_CAMNOC_SF 3 +#define MASTER_MDP0 4 +#define MASTER_MDP1 5 +#define MASTER_ROTATOR 6 +#define MASTER_VIDEO_P0 7 +#define MASTER_VIDEO_P1 8 +#define MASTER_VIDEO_PROC 9 +#define SLAVE_MNOC_SF_MEM_NOC 10 +#define SLAVE_MNOC_HF_MEM_NOC 11 +#define SLAVE_SERVICE_MNOC 12 +#define MASTER_CAMNOC_HF0_UNCOMP 13 +#define MASTER_CAMNOC_HF1_UNCOMP 14 +#define MASTER_CAMNOC_SF_UNCOMP 15 +#define SLAVE_CAMNOC_UNCOMP 16 + +#define MASTER_SNOC_CFG 0 +#define MASTER_A1NOC_SNOC 1 +#define MASTER_A2NOC_SNOC 2 +#define MASTER_GNOC_SNOC 3 +#define MASTER_MEM_NOC_SNOC 4 +#define MASTER_ANOC_PCIE_SNOC 5 +#define MASTER_PIMEM 6 +#define MASTER_GIC 7 +#define SLAVE_APPSS 8 +#define SLAVE_SNOC_CNOC 9 +#define SLAVE_SNOC_MEM_NOC_GC 10 +#define SLAVE_SNOC_MEM_NOC_SF 11 +#define SLAVE_IMEM 12 +#define SLAVE_PCIE_0 13 +#define SLAVE_PCIE_1 14 +#define SLAVE_PIMEM 15 +#define SLAVE_SERVICE_SNOC 16 +#define SLAVE_QDSS_STM 17 +#define SLAVE_TCU 18 #endif diff --git a/sys/gnu/dts/include/dt-bindings/leds/common.h b/sys/gnu/dts/include/dt-bindings/leds/common.h index 9e1256a7c1bf..0ce7dfc00dcb 100644 --- a/sys/gnu/dts/include/dt-bindings/leds/common.h +++ b/sys/gnu/dts/include/dt-bindings/leds/common.h @@ -6,6 +6,7 @@ * Author: Jacek Anaszewski <j.anaszewski@samsung.com> * * Copyright (C) 2019 Jacek Anaszewski <jacek.anaszewski@gmail.com> + * Copyright (C) 2020 Pavel Machek <pavel@ucw.cz> */ #ifndef __DT_BINDINGS_LEDS_H @@ -32,16 +33,38 @@ #define LED_COLOR_ID_MAX 8 /* Standard LED functions */ +/* Keyboard LEDs, usually it would be input4::capslock etc. */ +/* Obsolete equivalent: "shift-key-light" */ +#define LED_FUNCTION_CAPSLOCK "capslock" +#define LED_FUNCTION_SCROLLLOCK "scrolllock" +#define LED_FUNCTION_NUMLOCK "numlock" +/* Obsolete equivalents: "tpacpi::thinklight" (IBM/Lenovo Thinkpads), + "lp5523:kb{1,2,3,4,5,6}" (Nokia N900) */ +#define LED_FUNCTION_KBD_BACKLIGHT "kbd_backlight" + +/* System LEDs, usually found on system body. + platform::mute (etc) is sometimes seen, :mute would be better */ +#define LED_FUNCTION_POWER "power" +#define LED_FUNCTION_DISK "disk" + +/* Obsolete: "platform:*:charging" (allwinner sun50i) */ +#define LED_FUNCTION_CHARGING "charging" +/* Used RGB notification LEDs common on phones. + Obsolete equivalents: "status-led:{red,green,blue}" (Motorola Droid 4), + "lp5523:{r,g,b}" (Nokia N900) */ +#define LED_FUNCTION_STATUS "status" + +#define LED_FUNCTION_MICMUTE "micmute" +#define LED_FUNCTION_MUTE "mute" + +/* Miscelleaus functions. Use functions above if you can. */ #define LED_FUNCTION_ACTIVITY "activity" #define LED_FUNCTION_ALARM "alarm" #define LED_FUNCTION_BACKLIGHT "backlight" #define LED_FUNCTION_BLUETOOTH "bluetooth" #define LED_FUNCTION_BOOT "boot" #define LED_FUNCTION_CPU "cpu" -#define LED_FUNCTION_CAPSLOCK "capslock" -#define LED_FUNCTION_CHARGING "charging" #define LED_FUNCTION_DEBUG "debug" -#define LED_FUNCTION_DISK "disk" #define LED_FUNCTION_DISK_ACTIVITY "disk-activity" #define LED_FUNCTION_DISK_ERR "disk-err" #define LED_FUNCTION_DISK_READ "disk-read" @@ -50,21 +73,14 @@ #define LED_FUNCTION_FLASH "flash" #define LED_FUNCTION_HEARTBEAT "heartbeat" #define LED_FUNCTION_INDICATOR "indicator" -#define LED_FUNCTION_KBD_BACKLIGHT "kbd_backlight" #define LED_FUNCTION_LAN "lan" #define LED_FUNCTION_MAIL "mail" #define LED_FUNCTION_MTD "mtd" -#define LED_FUNCTION_MICMUTE "micmute" -#define LED_FUNCTION_MUTE "mute" -#define LED_FUNCTION_NUMLOCK "numlock" #define LED_FUNCTION_PANIC "panic" #define LED_FUNCTION_PROGRAMMING "programming" -#define LED_FUNCTION_POWER "power" #define LED_FUNCTION_RX "rx" #define LED_FUNCTION_SD "sd" -#define LED_FUNCTION_SCROLLLOCK "scrolllock" #define LED_FUNCTION_STANDBY "standby" -#define LED_FUNCTION_STATUS "status" #define LED_FUNCTION_TORCH "torch" #define LED_FUNCTION_TX "tx" #define LED_FUNCTION_USB "usb" diff --git a/sys/gnu/dts/include/dt-bindings/media/tvp5150.h b/sys/gnu/dts/include/dt-bindings/media/tvp5150.h index 01eedf4985b8..dda00c038530 100644 --- a/sys/gnu/dts/include/dt-bindings/media/tvp5150.h +++ b/sys/gnu/dts/include/dt-bindings/media/tvp5150.h @@ -14,8 +14,6 @@ #define TVP5150_COMPOSITE1 1 #define TVP5150_SVIDEO 2 -#define TVP5150_INPUT_NUM 3 - /* TVP5150 HW outputs */ #define TVP5150_NORMAL 0 #define TVP5150_BLACK_SCREEN 1 diff --git a/sys/gnu/dts/include/dt-bindings/power/meson-a1-power.h b/sys/gnu/dts/include/dt-bindings/power/meson-a1-power.h new file mode 100644 index 000000000000..6cf50bfb8ccf --- /dev/null +++ b/sys/gnu/dts/include/dt-bindings/power/meson-a1-power.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* + * Copyright (c) 2019 Amlogic, Inc. + * Author: Jianxin Pan <jianxin.pan@amlogic.com> + */ + +#ifndef _DT_BINDINGS_MESON_A1_POWER_H +#define _DT_BINDINGS_MESON_A1_POWER_H + +#define PWRC_DSPA_ID 8 +#define PWRC_DSPB_ID 9 +#define PWRC_UART_ID 10 +#define PWRC_DMC_ID 11 +#define PWRC_I2C_ID 12 +#define PWRC_PSRAM_ID 13 +#define PWRC_ACODEC_ID 14 +#define PWRC_AUDIO_ID 15 +#define PWRC_OTP_ID 16 +#define PWRC_DMA_ID 17 +#define PWRC_SD_EMMC_ID 18 +#define PWRC_RAMA_ID 19 +#define PWRC_RAMB_ID 20 +#define PWRC_IR_ID 21 +#define PWRC_SPICC_ID 22 +#define PWRC_SPIFC_ID 23 +#define PWRC_USB_ID 24 +#define PWRC_NIC_ID 25 +#define PWRC_PDMIN_ID 26 +#define PWRC_RSA_ID 27 +#define PWRC_MAX_ID 28 + +#endif diff --git a/sys/gnu/dts/include/dt-bindings/soc/tegra-pmc.h b/sys/gnu/dts/include/dt-bindings/soc/tegra-pmc.h new file mode 100644 index 000000000000..a99a457471ee --- /dev/null +++ b/sys/gnu/dts/include/dt-bindings/soc/tegra-pmc.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2019-2020, NVIDIA CORPORATION. All rights reserved. + */ + +#ifndef _DT_BINDINGS_SOC_TEGRA_PMC_H +#define _DT_BINDINGS_SOC_TEGRA_PMC_H + +#define TEGRA_PMC_CLK_OUT_1 0 +#define TEGRA_PMC_CLK_OUT_2 1 +#define TEGRA_PMC_CLK_OUT_3 2 +#define TEGRA_PMC_CLK_BLINK 3 + +#define TEGRA_PMC_CLK_MAX 4 + +#endif /* _DT_BINDINGS_SOC_TEGRA_PMC_H */ diff --git a/sys/gnu/dts/include/dt-bindings/sound/meson-aiu.h b/sys/gnu/dts/include/dt-bindings/sound/meson-aiu.h new file mode 100644 index 000000000000..1051b8af298b --- /dev/null +++ b/sys/gnu/dts/include/dt-bindings/sound/meson-aiu.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __DT_MESON_AIU_H +#define __DT_MESON_AIU_H + +#define AIU_CPU 0 +#define AIU_HDMI 1 +#define AIU_ACODEC 2 + +#define CPU_I2S_FIFO 0 +#define CPU_SPDIF_FIFO 1 +#define CPU_I2S_ENCODER 2 +#define CPU_SPDIF_ENCODER 3 + +#define CTRL_I2S 0 +#define CTRL_PCM 1 +#define CTRL_OUT 2 + +#endif /* __DT_MESON_AIU_H */ diff --git a/sys/gnu/dts/include/dt-bindings/sound/meson-g12a-toacodec.h b/sys/gnu/dts/include/dt-bindings/sound/meson-g12a-toacodec.h new file mode 100644 index 000000000000..69d7a75592a2 --- /dev/null +++ b/sys/gnu/dts/include/dt-bindings/sound/meson-g12a-toacodec.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __DT_MESON_G12A_TOACODEC_H +#define __DT_MESON_G12A_TOACODEC_H + +#define TOACODEC_IN_A 0 +#define TOACODEC_IN_B 1 +#define TOACODEC_IN_C 2 +#define TOACODEC_OUT 3 + +#endif /* __DT_MESON_G12A_TOACODEC_H */ diff --git a/sys/gnu/dts/riscv/kendryte/k210.dts b/sys/gnu/dts/riscv/kendryte/k210.dts new file mode 100644 index 000000000000..0d1f28fce6b2 --- /dev/null +++ b/sys/gnu/dts/riscv/kendryte/k210.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Western Digital Corporation or its affiliates. + */ + +/dts-v1/; + +#include "k210.dtsi" + +/ { + model = "Kendryte K210 generic"; + compatible = "kendryte,k210"; + + chosen { + bootargs = "earlycon console=ttySIF0"; + stdout-path = "serial0"; + }; +}; + +&uarths0 { + status = "okay"; +}; + diff --git a/sys/gnu/dts/riscv/kendryte/k210.dtsi b/sys/gnu/dts/riscv/kendryte/k210.dtsi new file mode 100644 index 000000000000..c1df56ccb8d5 --- /dev/null +++ b/sys/gnu/dts/riscv/kendryte/k210.dtsi @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com> + * Copyright (C) 2020 Western Digital Corporation or its affiliates. + */ +#include <dt-bindings/clock/k210-clk.h> + +/ { + /* + * Although the K210 is a 64-bit CPU, the address bus is only 32-bits + * wide, and the upper half of all addresses is ignored. + */ + #address-cells = <1>; + #size-cells = <1>; + compatible = "kendryte,k210"; + + aliases { + serial0 = &uarths0; + }; + + /* + * The K210 has an sv39 MMU following the priviledge specification v1.9. + * Since this is a non-ratified draft specification, the kernel does not + * support it and the K210 support enabled only for the !MMU case. + * Be consistent with this by setting the CPUs MMU type to "none". + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <7800000>; + cpu0: cpu@0 { + device_type = "cpu"; + reg = <0>; + compatible = "kendryte,k210", "sifive,rocket0", "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "none"; + i-cache-size = <0x8000>; + i-cache-block-size = <64>; + d-cache-size = <0x8000>; + d-cache-block-size = <64>; + clocks = <&sysctl K210_CLK_CPU>; + clock-frequency = <390000000>; + cpu0_intc: interrupt-controller { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + }; + }; + cpu1: cpu@1 { + device_type = "cpu"; + reg = <1>; + compatible = "kendryte,k210", "sifive,rocket0", "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "none"; + i-cache-size = <0x8000>; + i-cache-block-size = <64>; + d-cache-size = <0x8000>; + d-cache-block-size = <64>; + clocks = <&sysctl K210_CLK_CPU>; + clock-frequency = <390000000>; + cpu1_intc: interrupt-controller { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + }; + }; + }; + + sram: memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x400000>, + <0x80400000 0x200000>, + <0x80600000 0x200000>; + reg-names = "sram0", "sram1", "aisram"; + }; + + clocks { + in0: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "kendryte,k210-soc", "simple-bus"; + ranges; + interrupt-parent = <&plic0>; + + sysctl: sysctl@50440000 { + compatible = "kendryte,k210-sysctl", "simple-mfd"; + reg = <0x50440000 0x1000>; + #clock-cells = <1>; + }; + + clint0: interrupt-controller@2000000 { + compatible = "riscv,clint0"; + reg = <0x2000000 0xC000>; + interrupts-extended = <&cpu0_intc 3>, <&cpu1_intc 3>; + clocks = <&sysctl K210_CLK_ACLK>; + }; + + plic0: interrupt-controller@c000000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "kendryte,k210-plic0", "riscv,plic0"; + reg = <0xC000000 0x4000000>; + interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 0xffffffff>, + <&cpu1_intc 11>, <&cpu1_intc 0xffffffff>; + riscv,ndev = <65>; + riscv,max-priority = <7>; + }; + + uarths0: serial@38000000 { + compatible = "kendryte,k210-uarths", "sifive,uart0"; + reg = <0x38000000 0x1000>; + interrupts = <33>; + clocks = <&sysctl K210_CLK_CPU>; + }; + }; +}; |