aboutsummaryrefslogtreecommitdiff
path: root/sys/gnu/dts/arm64/qcom/sdm845-db845c.dts
diff options
context:
space:
mode:
Diffstat (limited to 'sys/gnu/dts/arm64/qcom/sdm845-db845c.dts')
-rw-r--r--sys/gnu/dts/arm64/qcom/sdm845-db845c.dts280
1 files changed, 280 insertions, 0 deletions
diff --git a/sys/gnu/dts/arm64/qcom/sdm845-db845c.dts b/sys/gnu/dts/arm64/qcom/sdm845-db845c.dts
index eb77aaa6a819..21fd6f8d5799 100644
--- a/sys/gnu/dts/arm64/qcom/sdm845-db845c.dts
+++ b/sys/gnu/dts/arm64/qcom/sdm845-db845c.dts
@@ -8,6 +8,8 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
#include "sdm845.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"
@@ -359,11 +361,56 @@
};
};
+&i2c11 {
+ /* On Low speed expansion */
+ label = "LS-I2C1";
+ status = "okay";
+};
+
+&i2c14 {
+ /* On Low speed expansion */
+ label = "LS-I2C0";
+ status = "okay";
+};
+
&mss_pil {
status = "okay";
firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
};
+&pcie0 {
+ status = "okay";
+ perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
+ enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+
+ vddpe-3v3-supply = <&pcie0_3p3v_dual>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_default_state>;
+};
+
+&pcie0_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&pcie1 {
+ status = "okay";
+ perst-gpio = <&tlmm 102 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_default_state>;
+};
+
+&pcie1_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
&pm8998_gpio {
vol_up_pin_a: vol-up-active {
pins = "gpio6";
@@ -384,6 +431,34 @@
};
};
+/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
+&q6afedai {
+ qi2s@22 {
+ reg = <22>;
+ qcom,sd-lines = <0 1 2 3>;
+ };
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+
+ dai@3 {
+ reg = <3>;
+ direction = <2>;
+ is-compress-dai;
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -405,7 +480,121 @@
cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
};
+&sound {
+ compatible = "qcom,db845c-sndcard";
+ pinctrl-0 = <&quat_mi2s_active
+ &quat_mi2s_sd0_active
+ &quat_mi2s_sd1_active
+ &quat_mi2s_sd2_active
+ &quat_mi2s_sd3_active>;
+ pinctrl-names = "default";
+ model = "DB845c";
+ audio-routing =
+ "RX_BIAS", "MCLK",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "DMIC0", "MIC BIAS1",
+ "DMIC1", "MIC BIAS1",
+ "DMIC2", "MIC BIAS3",
+ "DMIC3", "MIC BIAS3",
+ "SpkrLeft IN", "SPK1 OUT",
+ "SpkrRight IN", "SPK2 OUT",
+ "MM_DL1", "MultiMedia1 Playback",
+ "MM_DL2", "MultiMedia2 Playback",
+ "MM_DL4", "MultiMedia4 Playback",
+ "MultiMedia3 Capture", "MM_UL3";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ mm4-dai-link {
+ link-name = "MultiMedia4";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+ };
+ };
+
+ slim-dai-link {
+ link-name = "SLIM Playback";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+ };
+ };
+
+ slimcap-dai-link {
+ link-name = "SLIM Capture";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 1>;
+ };
+ };
+};
+
+&spi2 {
+ /* On Low speed expansion */
+ label = "LS-SPI0";
+ status = "okay";
+};
+
&tlmm {
+ pcie0_default_state: pcie0-default {
+ clkreq {
+ pins = "gpio36";
+ function = "pci_e0";
+ bias-pull-up;
+ };
+
+ reset-n {
+ pins = "gpio35";
+ function = "gpio";
+
+ drive-strength = <2>;
+ output-low;
+ bias-pull-down;
+ };
+
+ wake-n {
+ pins = "gpio37";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
pcie0_pwren_state: pcie0-pwren {
pins = "gpio90";
function = "gpio";
@@ -414,6 +603,39 @@
bias-disable;
};
+ pcie1_default_state: pcie1-default {
+ perst-n {
+ pins = "gpio102";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ clkreq {
+ pins = "gpio103";
+ function = "pci_e1";
+ bias-pull-up;
+ };
+
+ wake-n {
+ pins = "gpio11";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ reset-n {
+ pins = "gpio75";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-pull-up;
+ output-high;
+ };
+ };
+
sdc2_default_state: sdc2-default {
clk {
pins = "sdc2_clk";
@@ -444,6 +666,20 @@
function = "gpio";
bias-pull-up;
};
+
+ wcd_intr_default: wcd_intr_default {
+ pins = <54>;
+ function = "gpio";
+
+ input-enable;
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+};
+
+&uart3 {
+ label = "LS-UART0";
+ status = "disabled";
};
&uart6 {
@@ -461,6 +697,7 @@
};
&uart9 {
+ label = "LS-UART1";
status = "okay";
};
@@ -534,6 +771,39 @@
vdda-pll-supply = <&vreg_l26a_1p2>;
};
+&wcd9340{
+ pinctrl-0 = <&wcd_intr_default>;
+ pinctrl-names = "default";
+ clock-names = "extclk";
+ clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+ reset-gpios = <&tlmm 64 0>;
+ vdd-buck-supply = <&vreg_s4a_1p8>;
+ vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+ vdd-tx-supply = <&vreg_s4a_1p8>;
+ vdd-rx-supply = <&vreg_s4a_1p8>;
+ vdd-io-supply = <&vreg_s4a_1p8>;
+
+ swm: swm@c85 {
+ left_spkr: wsa8810-left{
+ compatible = "sdw10217201000";
+ reg = <0 1>;
+ powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+ #thermal-sensor-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ #sound-dai-cells = <0>;
+ };
+
+ right_spkr: wsa8810-right{
+ compatible = "sdw10217201000";
+ powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+ reg = <0 2>;
+ #thermal-sensor-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ #sound-dai-cells = <0>;
+ };
+ };
+};
+
&wifi {
status = "okay";
@@ -546,6 +816,16 @@
};
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+&qup_spi2_default {
+ drive-strength = <16>;
+};
+
+&qup_uart3_default{
+ pinmux {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ function = "qup3";
+ };
+};
&qup_uart6_default {
pinmux {